← Commit history
page.json+18−15@@ -53,13 +53,13 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive lead of charge-pump flying capacitor C1; connect a 0.1 \u00b5F (3.3 V) or 0.047 \u00b5F (5 V) capacitor between C1+ and C1\u2212."+ "description": "Positive lead of charge-pump flying capacitor C1; connect a 0.1 µF (3.3 V) or 0.047 µF (5 V) capacitor between C1+ and C1−." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Positive charge-pump output; connect storage capacitor (0.1 \u00b5F at 3.3 V, 0.33 \u00b5F at 5 V) to GND; maximum voltage +7 V with respect to GND."+ "description": "Positive charge-pump output; connect storage capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V) to GND; maximum voltage +7 V with respect to GND." }, { "number": "3",@@ -71,7 +71,7 @@ "number": "4", "name": "C2+", "type": "passive",- "description": "Positive lead of charge-pump flying capacitor C2; connect a 0.1 \u00b5F (3.3 V) or 0.33 \u00b5F (5 V) capacitor between C2+ and C2\u2212."+ "description": "Positive lead of charge-pump flying capacitor C2; connect a 0.1 µF (3.3 V) or 0.33 µF (5 V) capacitor between C2+ and C2−." }, { "number": "5",@@ -83,67 +83,67 @@ "number": "6", "name": "V-", "type": "power_out",- "description": "Negative charge-pump output; connect storage capacitor (0.1 \u00b5F at 3.3 V, 0.33 \u00b5F at 5 V) to GND; minimum voltage \u22127 V with respect to GND."+ "description": "Negative charge-pump output; connect storage capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V) to GND; minimum voltage −7 V with respect to GND." }, { "number": "7", "name": "DOUT2", "type": "output",- "description": "RS-232 line driver output for channel 2 (to remote RS-232 system); output swings \u2265+5 V / \u2264\u22125 V into 3 k\u03a9, \u00b115 kV HBM ESD-protected, slew rate 14-150 V/\u00b5s."+ "description": "RS-232 line driver output for channel 2 (to remote RS-232 system); output swings ≥+5 V / ≤−5 V into 3 kΩ, ±15 kV HBM ESD-protected, slew rate 14-150 V/µs." }, { "number": "8", "name": "RIN2", "type": "input",- "description": "RS-232 line receiver input for channel 2 (from remote RS-232 system); accepts \u00b125 V, 3-7 k\u03a9 internal load, \u00b115 kV HBM ESD-protected."+ "description": "RS-232 line receiver input for channel 2 (from remote RS-232 system); accepts ±25 V, 3-7 kΩ internal load, ±15 kV HBM ESD-protected." }, { "number": "9", "name": "ROUT2", "type": "output",- "description": "Logic-level receiver output for channel 2 (to UART); VOH \u2265 VCC\u22120.6 V at \u22121 mA, VOL \u2264 0.4 V at 1.6 mA; open RIN2 forces high output."+ "description": "Logic-level receiver output for channel 2 (to UART); VOH ≥ VCC−0.6 V at −1 mA, VOL ≤ 0.4 V at 1.6 mA; open RIN2 forces high output." }, { "number": "10", "name": "DIN2", "type": "input",- "description": "Logic-level driver input for channel 2 (from UART); VIH \u2265 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL \u2264 0.8 V, accepts up to 5.5 V."+ "description": "Logic-level driver input for channel 2 (from UART); VIH ≥ 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL ≤ 0.8 V, accepts up to 5.5 V." }, { "number": "11", "name": "DIN1", "type": "input",- "description": "Logic-level driver input for channel 1 (from UART); VIH \u2265 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL \u2264 0.8 V, accepts up to 5.5 V."+ "description": "Logic-level driver input for channel 1 (from UART); VIH ≥ 2 V (3.3 V supply) / 2.4 V (5 V supply), VIL ≤ 0.8 V, accepts up to 5.5 V." }, { "number": "12", "name": "ROUT1", "type": "output",- "description": "Logic-level receiver output for channel 1 (to UART); VOH \u2265 VCC\u22120.6 V at \u22121 mA, VOL \u2264 0.4 V at 1.6 mA; open RIN1 forces high output."+ "description": "Logic-level receiver output for channel 1 (to UART); VOH ≥ VCC−0.6 V at −1 mA, VOL ≤ 0.4 V at 1.6 mA; open RIN1 forces high output." }, { "number": "13", "name": "RIN1", "type": "input",- "description": "RS-232 line receiver input for channel 1 (from remote RS-232 system); accepts \u00b125 V, 3-7 k\u03a9 internal load, \u00b115 kV HBM ESD-protected."+ "description": "RS-232 line receiver input for channel 1 (from remote RS-232 system); accepts ±25 V, 3-7 kΩ internal load, ±15 kV HBM ESD-protected." }, { "number": "14", "name": "DOUT1", "type": "output",- "description": "RS-232 line driver output for channel 1 (to remote RS-232 system); output swings \u2265+5 V / \u2264\u22125 V into 3 k\u03a9, \u00b115 kV HBM ESD-protected, slew rate 14-150 V/\u00b5s."+ "description": "RS-232 line driver output for channel 1 (to remote RS-232 system); output swings ≥+5 V / ≤−5 V into 3 kΩ, ±15 kV HBM ESD-protected, slew rate 14-150 V/µs." }, { "number": "15", "name": "GND", "type": "power_in",- "description": "Ground reference; all voltages (VCC, V+, V\u2212) are referenced to this pin."+ "description": "Ground reference; all voltages (VCC, V+, V−) are referenced to this pin." }, { "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage; connect to 3 V-5.5 V external supply; bypass with \u22650.1 \u00b5F capacitor to GND; quiescent current 300 \u00b5A typical, 1 mA maximum."+ "description": "Supply voltage; connect to 3 V-5.5 V external supply; bypass with ≥0.1 µF capacitor to GND; quiescent current 300 µA typical, 1 mA maximum." } ], "provenance": {@@ -221,5 +221,8 @@ "docs/trsf3232ecdr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }