component
TRS3386EIPWR
Public Made by Adomby adom
Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# TRS3386EIPWR++**Texas Instruments** · RS232 ICs · TSSOP-20++TRS3386EIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor |+| 2 | V+ | power_out | 5.5-V supply generated by the charge pump |+| 3 | C1− | passive | Negative terminal of the voltage-doubler charge-pump capacitor |+| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor |+| 5 | C2− | passive | Negative terminal of the inverting charge-pump capacitor |+| 6 | V− | power_out | -5.5-V supply generated by the charge pump |+| 7 | DIN1 | input | Driver input |+| 8 | DIN2 | input | Driver input |+| 9 | DIN3 | input | Driver input |+| 10 | ROUT2 | output | Receiver output; swings between 0 and VL |+| 11 | ROUT1 | output | Receiver output; swings between 0 and VL |+| 12 | VL | power_in | Logic-level supply; all CMOS inputs and outputs are referenced to this supply |+| 13 | RIN2 | input | RS-232 receiver input |+| 14 | RIN1 | input | RS-232 receiver input |+| 15 | DOUT3 | output | RS-232 driver output |+| 16 | DOUT2 | output | RS-232 driver output |+| 17 | DOUT1 | output | RS-232 driver output |+| 18 | GND | power_in | Ground |+| 19 | VCC | power_in | 3-V to 5.5-V supply voltage |+| 20 | PWRDWN | input | Powerdown input; L = powerdown, H = normal operation |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | Interface |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `TRS3386EIPWR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `trs3386eipwr-etched.step` / `trs3386eipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `trs3386eipwr.step` / `trs3386eipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/trs3386e) (21 pp, sha256 `27ac23532b1b85b6`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/trs3386eipwr-datasheet.pdf)
page.jsonadded+270@@ -0,0 +1,270 @@+{+ "slug": "trs3386eipwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS232 ICs, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "trs3386eipwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "trs3386eipwr.kicad_sym",+ "trs3386eipwr.kicad_mod",+ "trs3386eipwr.glb",+ "trs3386eipwr.step",+ "trs3386eipwr.lbr",+ "docs/hero.png",+ "docs/trs3386eipwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "trs3386eipwr-hero.glb",+ "trs3386eipwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TRS3386EIPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-20",+ "pin_count": 20,+ "category": "Interface",+ "subcategory": "RS232 ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/trs3386e",+ "parts": {+ "symbol": "trs3386eipwr.kicad_sym",+ "footprint": "trs3386eipwr.kicad_mod",+ "model_3d": "trs3386eipwr-hero.glb",+ "model_3d_plain": "trs3386eipwr.glb",+ "model_3d_step": "trs3386eipwr-etched.step",+ "model_3d_step_plain": "trs3386eipwr.step",+ "lbr": "trs3386eipwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2671454",+ "digikey": "296-25065-2-ND",+ "mouser": "595-TRS3386EIPWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T07:16:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-25065-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TRS3386EIPWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of the voltage-doubler charge-pump capacitor"+ },+ {+ "number": "2",+ "name": "V+",+ "type": "power_out",+ "description": "5.5-V supply generated by the charge pump"+ },+ {+ "number": "3",+ "name": "C1−",+ "type": "passive",+ "description": "Negative terminal of the voltage-doubler charge-pump capacitor"+ },+ {+ "number": "4",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of the inverting charge-pump capacitor"+ },+ {+ "number": "5",+ "name": "C2−",+ "type": "passive",+ "description": "Negative terminal of the inverting charge-pump capacitor"+ },+ {+ "number": "6",+ "name": "V−",+ "type": "power_out",+ "description": "-5.5-V supply generated by the charge pump"+ },+ {+ "number": "7",+ "name": "DIN1",+ "type": "input",+ "description": "Driver input"+ },+ {+ "number": "8",+ "name": "DIN2",+ "type": "input",+ "description": "Driver input"+ },+ {+ "number": "9",+ "name": "DIN3",+ "type": "input",+ "description": "Driver input"+ },+ {+ "number": "10",+ "name": "ROUT2",+ "type": "output",+ "description": "Receiver output; swings between 0 and VL"+ },+ {+ "number": "11",+ "name": "ROUT1",+ "type": "output",+ "description": "Receiver output; swings between 0 and VL"+ },+ {+ "number": "12",+ "name": "VL",+ "type": "power_in",+ "description": "Logic-level supply; all CMOS inputs and outputs are referenced to this supply"+ },+ {+ "number": "13",+ "name": "RIN2",+ "type": "input",+ "description": "RS-232 receiver input"+ },+ {+ "number": "14",+ "name": "RIN1",+ "type": "input",+ "description": "RS-232 receiver input"+ },+ {+ "number": "15",+ "name": "DOUT3",+ "type": "output",+ "description": "RS-232 driver output"+ },+ {+ "number": "16",+ "name": "DOUT2",+ "type": "output",+ "description": "RS-232 driver output"+ },+ {+ "number": "17",+ "name": "DOUT1",+ "type": "output",+ "description": "RS-232 driver output"+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground"+ },+ {+ "number": "19",+ "name": "VCC",+ "type": "power_in",+ "description": "3-V to 5.5-V supply voltage"+ },+ {+ "number": "20",+ "name": "PWRDWN",+ "type": "input",+ "description": "Powerdown input; L = powerdown, H = normal operation"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 21,+ "cost_usd": 0.1458,+ "at": "2026-10-07T07:16:24"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/trs3386e",+ "pages": 21,+ "sha256": "27ac23532b1b85b6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "trs3386eipwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "trs3386eipwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5547e66f397685ed5eb08d1558b2683d3b10599b9786d84eb17b7e51138f02e8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}