component
TRS3243ECRHBR
Public Made by Adomby adom
Texas Instruments RS232 ICs, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+70@@ -0,0 +1,70 @@+# TRS3243ECRHBR++**Texas Instruments** · RS232 ICs · VQFN-32-EP(5x5)++TRS3243ECRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RIN1 | input | RS-232 receiver input accepting -25V to +25V signals. |+| 2 | RIN2 | input | RS-232 receiver input accepting -25V to +25V signals. |+| 3 | RIN3 | input | RS-232 receiver input accepting -25V to +25V signals. |+| 4 | RIN4 | input | RS-232 receiver input accepting -25V to +25V signals. |+| 5 | RIN5 | input | RS-232 receiver input accepting -25V to +25V signals. |+| 6 | DOUT1 | output | RS-232 driver output swinging approximately -5.4V to +5.4V. |+| 7 | DOUT2 | output | RS-232 driver output swinging approximately -5.4V to +5.4V. |+| 8 | DOUT3 | output | RS-232 driver output swinging approximately -5.4V to +5.4V. |+| 9 | NC | unconnected | Not connected internally. |+| 10 | DIN3 | input | Driver input accepting TTL/CMOS logic signals from 0V to VCC. |+| 11 | DIN2 | input | Driver input accepting TTL/CMOS logic signals from 0V to VCC. |+| 12 | DIN1 | input | Driver input accepting TTL/CMOS logic signals from 0V to VCC. |+| 13 | ROUT5 | output | Receiver output producing TTL/CMOS logic levels from 0V to VCC. |+| 14 | ROUT4 | output | Receiver output producing TTL/CMOS logic levels from 0V to VCC. |+| 15 | ROUT3 | output | Receiver output producing TTL/CMOS logic levels from 0V to VCC. |+| 16 | NC | unconnected | Not connected internally. |+| 17 | ROUT2 | output | Receiver output producing TTL/CMOS logic levels from 0V to VCC. |+| 18 | ROUT1 | output | Receiver output producing TTL/CMOS logic levels from 0V to VCC. |+| 19 | ROUT2B | output | Always-active noninverting receiver output that remains active during device shutdown. |+| 20 | INVALID | output | Invalid output pin indicating absence of valid RS-232 signal level. |+| 21 | FORCEOFF | input | Auto powerdown control input; pull to GND to force drivers off and reduce supply current to 1μA. |+| 22 | FORCEON | input | Auto powerdown control input; pull to GND to enable powerdown feature when FORCEOFF is high. |+| 23 | C1- | passive | Negative terminal of voltage doubler charge pump capacitor. |+| 24 | GND | power_in | Ground; power return and logic reference voltage. |+| 25 | NC | unconnected | Not connected internally. |+| 26 | VCC | power_in | 3V to 5.5V positive power supply input. |+| 27 | V+ | power_out | Positive charge pump output voltage supplying driver circuits. |+| 28 | C1+ | passive | Positive terminal of voltage doubler charge pump capacitor. |+| 29 | C2+ | passive | Positive terminal of voltage doubler charge pump capacitor. |+| 30 | C2- | passive | Negative terminal of voltage doubler charge pump capacitor. |+| 31 | V- | power_out | Negative charge pump output voltage supplying driver circuits. |+| 32 | NC | unconnected | Not connected internally. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Interface |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TRS3243ECRHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `trs3243ecrhbr-etched.step` / `trs3243ecrhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `trs3243ecrhbr.step` / `trs3243ecrhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/trs3243e) (32 pp, sha256 `d01e3de0617eb95b`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/trs3243ecrhbr-datasheet.pdf)
page.jsonadded+308@@ -0,0 +1,308 @@+{+ "slug": "trs3243ecrhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS232 ICs, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "trs3243ecrhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "trs3243ecrhbr.kicad_sym",+ "trs3243ecrhbr.kicad_mod",+ "trs3243ecrhbr.glb",+ "trs3243ecrhbr.step",+ "trs3243ecrhbr.lbr",+ "docs/hero.png",+ "docs/trs3243ecrhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TRS3243ECRHBR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Interface",+ "subcategory": "RS232 ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/trs3243e",+ "parts": {+ "symbol": "trs3243ecrhbr.kicad_sym",+ "footprint": "trs3243ecrhbr.kicad_mod",+ "model_3d": "trs3243ecrhbr-etched.glb",+ "model_3d_plain": "trs3243ecrhbr.glb",+ "model_3d_step": "trs3243ecrhbr-etched.step",+ "model_3d_step_plain": "trs3243ecrhbr.step",+ "lbr": "trs3243ecrhbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2671340",+ "digikey": "296-21905-2-ND",+ "mouser": "595-TRS3243ECRHBR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T09:56:56Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-21905-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TRS3243ECRHBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RIN1",+ "type": "input",+ "description": "RS-232 receiver input accepting -25V to +25V signals."+ },+ {+ "number": "2",+ "name": "RIN2",+ "type": "input",+ "description": "RS-232 receiver input accepting -25V to +25V signals."+ },+ {+ "number": "3",+ "name": "RIN3",+ "type": "input",+ "description": "RS-232 receiver input accepting -25V to +25V signals."+ },+ {+ "number": "4",+ "name": "RIN4",+ "type": "input",+ "description": "RS-232 receiver input accepting -25V to +25V signals."+ },+ {+ "number": "5",+ "name": "RIN5",+ "type": "input",+ "description": "RS-232 receiver input accepting -25V to +25V signals."+ },+ {+ "number": "6",+ "name": "DOUT1",+ "type": "output",+ "description": "RS-232 driver output swinging approximately -5.4V to +5.4V."+ },+ {+ "number": "7",+ "name": "DOUT2",+ "type": "output",+ "description": "RS-232 driver output swinging approximately -5.4V to +5.4V."+ },+ {+ "number": "8",+ "name": "DOUT3",+ "type": "output",+ "description": "RS-232 driver output swinging approximately -5.4V to +5.4V."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected internally."+ },+ {+ "number": "10",+ "name": "DIN3",+ "type": "input",+ "description": "Driver input accepting TTL/CMOS logic signals from 0V to VCC."+ },+ {+ "number": "11",+ "name": "DIN2",+ "type": "input",+ "description": "Driver input accepting TTL/CMOS logic signals from 0V to VCC."+ },+ {+ "number": "12",+ "name": "DIN1",+ "type": "input",+ "description": "Driver input accepting TTL/CMOS logic signals from 0V to VCC."+ },+ {+ "number": "13",+ "name": "ROUT5",+ "type": "output",+ "description": "Receiver output producing TTL/CMOS logic levels from 0V to VCC."+ },+ {+ "number": "14",+ "name": "ROUT4",+ "type": "output",+ "description": "Receiver output producing TTL/CMOS logic levels from 0V to VCC."+ },+ {+ "number": "15",+ "name": "ROUT3",+ "type": "output",+ "description": "Receiver output producing TTL/CMOS logic levels from 0V to VCC."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected internally."+ },+ {+ "number": "17",+ "name": "ROUT2",+ "type": "output",+ "description": "Receiver output producing TTL/CMOS logic levels from 0V to VCC."+ },+ {+ "number": "18",+ "name": "ROUT1",+ "type": "output",+ "description": "Receiver output producing TTL/CMOS logic levels from 0V to VCC."+ },+ {+ "number": "19",+ "name": "ROUT2B",+ "type": "output",+ "description": "Always-active noninverting receiver output that remains active during device shutdown."+ },+ {+ "number": "20",+ "name": "INVALID",+ "type": "output",+ "description": "Invalid output pin indicating absence of valid RS-232 signal level."+ },+ {+ "number": "21",+ "name": "FORCEOFF",+ "type": "input",+ "description": "Auto powerdown control input; pull to GND to force drivers off and reduce supply current to 1μA."+ },+ {+ "number": "22",+ "name": "FORCEON",+ "type": "input",+ "description": "Auto powerdown control input; pull to GND to enable powerdown feature when FORCEOFF is high."+ },+ {+ "number": "23",+ "name": "C1-",+ "type": "passive",+ "description": "Negative terminal of voltage doubler charge pump capacitor."+ },+ {+ "number": "24",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; power return and logic reference voltage."+ },+ {+ "number": "25",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected internally."+ },+ {+ "number": "26",+ "name": "VCC",+ "type": "power_in",+ "description": "3V to 5.5V positive power supply input."+ },+ {+ "number": "27",+ "name": "V+",+ "type": "power_out",+ "description": "Positive charge pump output voltage supplying driver circuits."+ },+ {+ "number": "28",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of voltage doubler charge pump capacitor."+ },+ {+ "number": "29",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of voltage doubler charge pump capacitor."+ },+ {+ "number": "30",+ "name": "C2-",+ "type": "passive",+ "description": "Negative terminal of voltage doubler charge pump capacitor."+ },+ {+ "number": "31",+ "name": "V-",+ "type": "power_out",+ "description": "Negative charge pump output voltage supplying driver circuits."+ },+ {+ "number": "32",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected internally."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 32,+ "cost_usd": 0.4332,+ "at": "2026-09-27T09:56:38"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/trs3243e",+ "pages": 32,+ "sha256": "d01e3de0617eb95b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}