← Commit history

trs3232eqpwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·36bfce2315 · ·parent 702cafa
2 files changed +95−15
package.json+53−13
@@ -53,7 +53,7 @@         "number": "1",         "name": "C1+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor 1; a 0.1 \u00b5F (VCC=3.3 V) or 0.047 \u00b5F (VCC=5 V) external capacitor is connected between C1+ and C1- for the charge-pump."+        "description": "Positive terminal of charge-pump capacitor 1; a 0.1 µF (VCC=3.3 V) or 0.047 µF (VCC=5 V) external capacitor is connected between C1+ and C1- for the charge-pump."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "C2+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor 2 (voltage-inversion stage); a 0.1 \u00b5F (VCC=3.3 V) or 0.33 \u00b5F (VCC=5 V) external capacitor is connected between C2+ and C2-."+        "description": "Positive terminal of charge-pump capacitor 2 (voltage-inversion stage); a 0.1 µF (VCC=3.3 V) or 0.33 µF (VCC=5 V) external capacitor is connected between C2+ and C2-."       },       {         "number": "5",@@ -89,13 +89,13 @@         "number": "7",         "name": "DOUT2",         "type": "output",-        "description": "Driver 2 RS-232-level output; VOH=5 V typ (5.4 V max) and VOL=-5 V typ (-5.4 V max) into RL=3 k\u03a9, output voltage range -13.2 V to 13.2 V, short-circuit current limited to \u00b160 mA max, ESD protected to \u00b115-kV HBM and \u00b115-kV IEC61000-4-2 air-gap discharge (\u00b18-kV contact discharge)."+        "description": "Driver 2 RS-232-level output; VOH=5 V typ (5.4 V max) and VOL=-5 V typ (-5.4 V max) into RL=3 kΩ, output voltage range -13.2 V to 13.2 V, short-circuit current limited to ±60 mA max, ESD protected to ±15-kV HBM and ±15-kV IEC61000-4-2 air-gap discharge (±8-kV contact discharge)."       },       {         "number": "8",         "name": "RIN2",         "type": "input",-        "description": "Receiver 2 RS-232-level input; accepts an input voltage of -25 V to 25 V, input resistance 3 k\u03a9 to 7 k\u03a9, positive-going threshold 1.5-2.4 V and negative-going threshold 0.6-1.5 V depending on VCC, ESD protected to \u00b115-kV HBM and \u00b115-kV IEC61000-4-2 air-gap discharge (\u00b18-kV contact discharge)."+        "description": "Receiver 2 RS-232-level input; accepts an input voltage of -25 V to 25 V, input resistance 3 kΩ to 7 kΩ, positive-going threshold 1.5-2.4 V and negative-going threshold 0.6-1.5 V depending on VCC, ESD protected to ±15-kV HBM and ±15-kV IEC61000-4-2 air-gap discharge (±8-kV contact discharge)."       },       {         "number": "9",@@ -107,13 +107,13 @@         "number": "10",         "name": "DIN2",         "type": "input",-        "description": "Driver 2 logic-level input; VIH=2 V min at VCC=3.3 V or 2.4 V min at VCC=5 V (up to 5.5 V), VIL=0.8 V max, input current \u00b11 \u00b5A max."+        "description": "Driver 2 logic-level input; VIH=2 V min at VCC=3.3 V or 2.4 V min at VCC=5 V (up to 5.5 V), VIL=0.8 V max, input current ±1 µA max."       },       {         "number": "11",         "name": "DIN1",         "type": "input",-        "description": "Driver 1 logic-level input; VIH=2 V min at VCC=3.3 V or 2.4 V min at VCC=5 V (up to 5.5 V), VIL=0.8 V max, input current \u00b11 \u00b5A max."+        "description": "Driver 1 logic-level input; VIH=2 V min at VCC=3.3 V or 2.4 V min at VCC=5 V (up to 5.5 V), VIL=0.8 V max, input current ±1 µA max."       },       {         "number": "12",@@ -125,25 +125,25 @@         "number": "13",         "name": "RIN1",         "type": "input",-        "description": "Receiver 1 RS-232-level input; accepts an input voltage of -25 V to 25 V, input resistance 3 k\u03a9 to 7 k\u03a9, positive-going threshold 1.5-2.4 V and negative-going threshold 0.6-1.5 V depending on VCC, ESD protected to \u00b115-kV HBM and \u00b115-kV IEC61000-4-2 air-gap discharge (\u00b18-kV contact discharge)."+        "description": "Receiver 1 RS-232-level input; accepts an input voltage of -25 V to 25 V, input resistance 3 kΩ to 7 kΩ, positive-going threshold 1.5-2.4 V and negative-going threshold 0.6-1.5 V depending on VCC, ESD protected to ±15-kV HBM and ±15-kV IEC61000-4-2 air-gap discharge (±8-kV contact discharge)."       },       {         "number": "14",         "name": "DOUT1",         "type": "output",-        "description": "Driver 1 RS-232-level output; VOH=5 V typ (5.4 V max) and VOL=-5 V typ (-5.4 V max) into RL=3 k\u03a9, output voltage range -13.2 V to 13.2 V, short-circuit current limited to \u00b160 mA max, ESD protected to \u00b115-kV HBM and \u00b115-kV IEC61000-4-2 air-gap discharge (\u00b18-kV contact discharge)."+        "description": "Driver 1 RS-232-level output; VOH=5 V typ (5.4 V max) and VOL=-5 V typ (-5.4 V max) into RL=3 kΩ, output voltage range -13.2 V to 13.2 V, short-circuit current limited to ±60 mA max, ESD protected to ±15-kV HBM and ±15-kV IEC61000-4-2 air-gap discharge (±8-kV contact discharge)."       },       {         "number": "15",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for the device; all voltages are specified with respect to this network GND pin, and GND is one of the serial-port connection pins protected to \u00b115-kV IEC ESD."+        "description": "Ground reference for the device; all voltages are specified with respect to this network GND pin, and GND is one of the serial-port connection pins protected to ±15-kV IEC ESD."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage input; recommended operating range 3 V to 5.5 V (3.3 V \u00b10.3 V or 5 V \u00b10.5 V), absolute maximum -0.3 V to 6 V, typical supply current 0.3 mA (1 mA max) with no load."+        "description": "Supply voltage input; recommended operating range 3 V to 5.5 V (3.3 V ±0.3 V or 5 V ±0.5 V), absolute maximum -0.3 V to 6 V, typical supply current 0.3 mA (1 mA max) with no load."       }     ],     "provenance": {@@ -157,7 +157,7 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pins 1-6 and 15-16 (VCC, GND, C1+, C1\u2013, C2+, C2\u2013, V+, V\u2013) are inferred from the application circuit "+          "extractor flagged: Pins 1-6 and 15-16 (VCC, GND, C1+, C1–, C2+, C2–, V+, V–) are inferred from the application circuit "         ],         "pages_sent": 15,         "cost_usd": 0.3604,@@ -180,6 +180,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "trs3232eqpwrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "trs3232eqpwrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d300b314dc06775d6291631274a2273eedb7b7e5840002cd077da649cf687b35",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -165,7 +165,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "trs3232eqpwrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "trs3232eqpwrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d300b314dc06775d6291631274a2273eedb7b7e5840002cd077da649cf687b35",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -213,4 +253,4 @@     "public": true   },   "updated_at": "2026-09-25T12:57:14.478Z"-}\ No newline at end of file+}