component
TPT75176B-SO1R
Public Made by Adomby adom
3PEAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−10@@ -38,19 +38,19 @@ "number": "2", "name": "/RE", "type": "input",- "description": "Receiver enable (active-low). Drive low to enable the receiver; drive high (or leave open) to place the R output in high-impedance. Logic input thresholds VIH ≥ 2 V, VIL ≤ 0.8 V; input current ±2 μA max."+ "description": "Receiver enable (active-low). Drive low to enable the receiver; drive high (or leave open) to place the R output in high-impedance. Logic input thresholds VIH \u2265 2 V, VIL \u2264 0.8 V; input current \u00b12 \u03bcA max." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver enable (active-high). Drive high to enable the driver output onto A/B; drive low (or leave open) to place A/B in high-impedance. Logic input thresholds VIH ≥ 2 V, VIL ≤ 0.8 V; input current ±2 μA max."+ "description": "Driver enable (active-high). Drive high to enable the driver output onto A/B; drive low (or leave open) to place A/B in high-impedance. Logic input thresholds VIH \u2265 2 V, VIL \u2264 0.8 V; input current \u00b12 \u03bcA max." }, { "number": "4", "name": "D", "type": "input",- "description": "Driver data input. When DE is high, a logic-high on D drives bus A high and B low; logic-low drives A low and B high. Logic input thresholds VIH ≥ 2 V, VIL ≤ 0.8 V; input current ±2 μA max. Floating D with DE=H results in driving bus high (internal pull-up behavior)."+ "description": "Driver data input. When DE is high, a logic-high on D drives bus A high and B low; logic-low drives A low and B high. Logic input thresholds VIH \u2265 2 V, VIL \u2264 0.8 V; input current \u00b12 \u03bcA max. Floating D with DE=H results in driving bus high (internal pull-up behavior)." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Non-inverting RS-485 differential bus pin. Driver output when DE=H; receiver non-inverting input when /RE=L. Common-mode range -7 V to +12 V; absolute limits -9 V to +14 V (±100 V transient through 100 Ω). ±12 kV HBM / ±8 kV IEC contact / ±15 kV IEC air-discharge ESD protected."+ "description": "Non-inverting RS-485 differential bus pin. Driver output when DE=H; receiver non-inverting input when /RE=L. Common-mode range -7 V to +12 V; absolute limits -9 V to +14 V (\u00b1100 V transient through 100 \u03a9). \u00b112 kV HBM / \u00b18 kV IEC contact / \u00b115 kV IEC air-discharge ESD protected." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Inverting RS-485 differential bus pin. Driver output when DE=H; receiver inverting input when /RE=L. Common-mode range -7 V to +12 V; absolute limits -9 V to +14 V (±100 V transient through 100 Ω). ±12 kV HBM / ±8 kV IEC contact / ±15 kV IEC air-discharge ESD protected."+ "description": "Inverting RS-485 differential bus pin. Driver output when DE=H; receiver inverting input when /RE=L. Common-mode range -7 V to +12 V; absolute limits -9 V to +14 V (\u00b1100 V transient through 100 \u03a9). \u00b112 kV HBM / \u00b18 kV IEC contact / \u00b115 kV IEC air-discharge ESD protected." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage input. Recommended operating range 3.0 V to 5.5 V; absolute max 7 V. Quiescent supply current 3 mA typical (both driver and receiver enabled). Bypass locally with a 0.1 μF ceramic capacitor to GND."+ "description": "Supply voltage input. Recommended operating range 3.0 V to 5.5 V; absolute max 7 V. Quiescent supply current 3 mA typical (both driver and receiver enabled). Bypass locally with a 0.1 \u03bcF ceramic capacitor to GND." } ], "provenance": {@@ -138,8 +138,5 @@ "docs/tpt75176b-so1r-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }