← Commit history

Initial commit: component/tps92640pwpr

Ray ·d12fef1535 ·
2 files changed +249
README.mdadded+52
@@ -0,0 +1,52 @@+# TPS92640PWPR++**Texas Instruments** · LED Drivers · HTSSOP-14-EP++TPS92640PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Connect to input voltage between 7V and 85V with 1-µF bypass capacitor. |+| 2 | RON | input | Connect resistor to VIN and capacitor to GND to set switching frequency. |+| 3 | UDIM | input | Connect resistor divider from VIN to set undervoltage lockout threshold or drive with PWM dimming signal. |+| 4 | VOUT | input | Connect resistor divider from VOUT to provide scaled feedback voltage for output regulation. |+| 5 | VREF | power_out | 3V ±2% reference voltage output with up to 2.1mA source capability; bypass with 100-nF ceramic capacitor. |+| 6 | IADJ | input | Current adjustment input with 2.54V maximum clamp for analog dimming level or thermal foldback operation. |+| 7 | COMP | output | Error amplifier output; connect ceramic capacitor to GND to set loop compensation. |+| 8 | GND | power_in | System ground reference; connect to thermal pad (DAP) for heat dissipation. |+| 9 | CS | input | Current sense input; connect to positive terminal of sense resistor at bottom of LED stack. |+| 10 | LG | output | Low-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise. |+| 11 | VCC | power_out | 8.5V bias supply output for controller; bypass with 2.2-µF ceramic capacitor rated 10V or greater. |+| 12 | BOOT | power_out | Bootstrapped gate drive supply output; connect 100-nF capacitor to switch node and Schottky diode to VCC. |+| 13 | SW | output | Switch node output; connect to inductor and low-side NFET drain of buck regulator. |+| 14 | HG | output | High-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise. |+| 15 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | LED Drivers |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS92640PWPR`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `tps92640pwpr-etched.step` / `tps92640pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92640pwpr.step` / `tps92640pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92641) (42 pp, sha256 `213e3a6db0ea6712`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92640pwpr-datasheet.pdf)
page.jsonadded+197
@@ -0,0 +1,197 @@+{+  "slug": "tps92640pwpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps92640pwpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps92640pwpr.kicad_sym",+    "tps92640pwpr.kicad_mod",+    "tps92640pwpr.glb",+    "tps92640pwpr.step",+    "tps92640pwpr.lbr",+    "docs/hero.png",+    "docs/tps92640pwpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS92640PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92641",+    "parts": {+      "symbol": "tps92640pwpr.kicad_sym",+      "footprint": "tps92640pwpr.kicad_mod",+      "model_3d": "tps92640pwpr-etched.glb",+      "model_3d_plain": "tps92640pwpr.glb",+      "model_3d_step": "tps92640pwpr-etched.step",+      "model_3d_step_plain": "tps92640pwpr.step",+      "lbr": "tps92640pwpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C914101"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T04:34:56Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Connect to input voltage between 7V and 85V with 1-µF bypass capacitor."+      },+      {+        "number": "2",+        "name": "RON",+        "type": "input",+        "description": "Connect resistor to VIN and capacitor to GND to set switching frequency."+      },+      {+        "number": "3",+        "name": "UDIM",+        "type": "input",+        "description": "Connect resistor divider from VIN to set undervoltage lockout threshold or drive with PWM dimming signal."+      },+      {+        "number": "4",+        "name": "VOUT",+        "type": "input",+        "description": "Connect resistor divider from VOUT to provide scaled feedback voltage for output regulation."+      },+      {+        "number": "5",+        "name": "VREF",+        "type": "power_out",+        "description": "3V ±2% reference voltage output with up to 2.1mA source capability; bypass with 100-nF ceramic capacitor."+      },+      {+        "number": "6",+        "name": "IADJ",+        "type": "input",+        "description": "Current adjustment input with 2.54V maximum clamp for analog dimming level or thermal foldback operation."+      },+      {+        "number": "7",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output; connect ceramic capacitor to GND to set loop compensation."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "System ground reference; connect to thermal pad (DAP) for heat dissipation."+      },+      {+        "number": "9",+        "name": "CS",+        "type": "input",+        "description": "Current sense input; connect to positive terminal of sense resistor at bottom of LED stack."+      },+      {+        "number": "10",+        "name": "LG",+        "type": "output",+        "description": "Low-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise."+      },+      {+        "number": "11",+        "name": "VCC",+        "type": "power_out",+        "description": "8.5V bias supply output for controller; bypass with 2.2-µF ceramic capacitor rated 10V or greater."+      },+      {+        "number": "12",+        "name": "BOOT",+        "type": "power_out",+        "description": "Bootstrapped gate drive supply output; connect 100-nF capacitor to switch node and Schottky diode to VCC."+      },+      {+        "number": "13",+        "name": "SW",+        "type": "output",+        "description": "Switch node output; connect to inductor and low-side NFET drain of buck regulator."+      },+      {+        "number": "14",+        "name": "HG",+        "type": "output",+        "description": "High-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise."+      },+      {+        "number": "15",+        "name": "DAP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 42,+        "cost_usd": 0.4085,+        "at": "2026-09-27T04:34:39"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps92641",+        "pages": 42,+        "sha256": "213e3a6db0ea6712",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file