component
TPS92610QPWPRQ1
Public Made by Adomby adom
Texas Instruments LED Drivers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TPS92610QPWPRQ1++**Texas Instruments** · LED Drivers · HTSSOP-14-EP++TPS92610QPWPRQ1 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Device enable input; recommended range 0 V to 40 V, and the device is shut down when EN is LOW (shutdown current 5 µA to 10 µA). |+| 2 | DIAGEN | input | Diagnostics enable input, used to avoid false open-circuit diagnostics during low-voltage operation; recommended range 0 V to 40 V. |+| 3 | NC | unconnected | No internal connection. |+| 4 | PWM | input | PWM dimming input; recommended range 0 V to 40 V. |+| 5 | NC | unconnected | No internal connection. |+| 6 | FAULT | bidirectional | One-fails-all-fail fault bus; recommended range 0 V to 7 V, absolute maximum -0.3 V to 22 V. |+| 7 | GND | power_in | Ground reference for the device. |+| 8 | SSL | input | Single-LED short low-side reference; recommended range 0 V to 5 V. |+| 9 | SSH | input | Single-LED short high-side reference; recommended range 0 V to 5 V. |+| 10 | NC | unconnected | No internal connection. |+| 11 | OUT | output | Constant-current LED driver output; recommended range 0 V to 40 V, absolute maximum -0.3 V to 45 V. |+| 12 | NC | unconnected | No internal connection. |+| 13 | IN | input | Current sense input; sense voltage recommended range 4.4 V to 40 V. |+| 14 | SUPPLY | power_in | Device supply voltage; recommended range 4.5 V to 40 V, absolute maximum -0.3 V to 45 V. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | LED Drivers |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS92610QPWPRQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `tps92610qpwprq1-etched.step` / `tps92610qpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92610qpwprq1.step` / `tps92610qpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92610-q1) (31 pp, sha256 `fde64aa7503b1804`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92610qpwprq1-datasheet.pdf)
page.jsonadded+243@@ -0,0 +1,243 @@+{+ "slug": "tps92610qpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps92610qpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps92610qpwprq1.kicad_sym",+ "tps92610qpwprq1.kicad_mod",+ "tps92610qpwprq1.glb",+ "tps92610qpwprq1.step",+ "tps92610qpwprq1.lbr",+ "docs/hero.png",+ "docs/tps92610qpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps92610qpwprq1-hero.glb",+ "tps92610qpwprq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS92610QPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps92610-q1",+ "parts": {+ "symbol": "tps92610qpwprq1.kicad_sym",+ "footprint": "tps92610qpwprq1.kicad_mod",+ "model_3d": "tps92610qpwprq1-hero.glb",+ "model_3d_plain": "tps92610qpwprq1.glb",+ "model_3d_step": "tps92610qpwprq1-etched.step",+ "model_3d_step_plain": "tps92610qpwprq1.step",+ "lbr": "tps92610qpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C213537",+ "digikey": "296-50510-2-ND",+ "mouser": "595-TPS92610QPWPRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T02:48:44Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-50510-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS92610QPWPRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Device enable input; recommended range 0 V to 40 V, and the device is shut down when EN is LOW (shutdown current 5 µA to 10 µA)."+ },+ {+ "number": "2",+ "name": "DIAGEN",+ "type": "input",+ "description": "Diagnostics enable input, used to avoid false open-circuit diagnostics during low-voltage operation; recommended range 0 V to 40 V."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "4",+ "name": "PWM",+ "type": "input",+ "description": "PWM dimming input; recommended range 0 V to 40 V."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "6",+ "name": "FAULT",+ "type": "bidirectional",+ "description": "One-fails-all-fail fault bus; recommended range 0 V to 7 V, absolute maximum -0.3 V to 22 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "8",+ "name": "SSL",+ "type": "input",+ "description": "Single-LED short low-side reference; recommended range 0 V to 5 V."+ },+ {+ "number": "9",+ "name": "SSH",+ "type": "input",+ "description": "Single-LED short high-side reference; recommended range 0 V to 5 V."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "11",+ "name": "OUT",+ "type": "output",+ "description": "Constant-current LED driver output; recommended range 0 V to 40 V, absolute maximum -0.3 V to 45 V."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "13",+ "name": "IN",+ "type": "input",+ "description": "Current sense input; sense voltage recommended range 4.4 V to 40 V."+ },+ {+ "number": "14",+ "name": "SUPPLY",+ "type": "power_in",+ "description": "Device supply voltage; recommended range 4.5 V to 40 V, absolute maximum -0.3 V to 45 V."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet pin table lists SUPPLY as type I (input); it is typed power_in here because it is the ; The datasheet lists FAULT as I/O; mapped to KiCad bidirectional.; The PowerPAD exposed thermal pad is not given a pin number in the datasheet text and is not included",+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0538,+ "at": "2026-10-08T02:48:29"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps92610-q1",+ "pages": 31,+ "sha256": "fde64aa7503b1804",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps92610qpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.35,+ 5,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps92610qpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.35,+ 5,+ 1.05+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "0fcb049b77ccc6d89de1312c8ac6a88228f9975b86974d26f609427466b793aa",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}