component
TPS92515HVQDGQTQ1
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS92515HVQDGQTQ1++**Texas Instruments** · LED Drivers · MSOP-10-EP++TPS92515HVQDGQTQ1 from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COFF | input | Input for OFF-time control; connect resistor from VLED and capacitor to GND to set OFF-time threshold to 1.0 V nominal. |+| 2 | VCC | power_out | 5-V regulated output from internal regulator; nominal 5.0 V, range 4.8 to 5.2 V with external load up to 500 µA; use 1 µF to 10 µF decoupling capacitor. |+| 3 | GND | power_in | Ground reference; connect to circuit ground plane and thermal pad. |+| 4 | BOOT | input | Gate drive supply input; connect ceramic capacitor between BOOT and SW, and diode from VCC to BOOT; UVLO threshold 2.0 to 3.5 V with 125 mV hysteresis; maximum 70.5 V to GND. |+| 5 | SW | output | Internal N-channel FET source output; connect to output inductor; integrated FET RDS(on) 290 mΩ typical at 25°C, rising to 600 mΩ at 150°C; maximum 65 V to GND. |+| 6 | DRN | input | Internal N-channel FET drain input; connect to CSN node for peak current detection; maximum 65 V to GND for TPS92515HV. |+| 7 | CSN | input | Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current monitoring; threshold 224 to 251 mV at VIADJ = VCC, or 211.5 to 223.5 mV at VIADJ = 2.2 V. |+| 8 | VIN | power_in | Input supply voltage and current sense positive; operating range 5.5 to 65 V for TPS92515HV; UVLO threshold 4.65 to 5.15 V falling with 150 to 225 mV hysteresis; maximum 65 V to GND. |+| 9 | PWM | input | PWM dimming input and device enable; threshold 0.95 to 1.05 V rising with 50 to 150 mV hysteresis; includes 100 µA pulldown when low; connect to VCC if not used. |+| 10 | IADJ | input | Analog current adjust input; sets peak current threshold via internal 10:1 divider with 2.4 V clamp; practical range 0.5 to 5.5 V with best accuracy at 2.2 V or lower. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS92515HVQDGQTQ1`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps92515hvqdgqtq1-etched.step` / `tps92515hvqdgqtq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92515hvqdgqtq1.step` / `tps92515hvqdgqtq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92515-q1) (41 pp, sha256 `b6e415ec88013b0b`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92515hvqdgqtq1-datasheet.pdf)
page.jsonadded+176@@ -0,0 +1,176 @@+{+ "slug": "tps92515hvqdgqtq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps92515hvqdgqtq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps92515hvqdgqtq1.kicad_sym",+ "tps92515hvqdgqtq1.kicad_mod",+ "tps92515hvqdgqtq1.glb",+ "tps92515hvqdgqtq1.step",+ "tps92515hvqdgqtq1.lbr",+ "docs/hero.png",+ "docs/tps92515hvqdgqtq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS92515HVQDGQTQ1",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515-q1",+ "parts": {+ "symbol": "tps92515hvqdgqtq1.kicad_sym",+ "footprint": "tps92515hvqdgqtq1.kicad_mod",+ "model_3d": "tps92515hvqdgqtq1-etched.glb",+ "model_3d_plain": "tps92515hvqdgqtq1.glb",+ "model_3d_step": "tps92515hvqdgqtq1-etched.step",+ "model_3d_step_plain": "tps92515hvqdgqtq1.step",+ "lbr": "tps92515hvqdgqtq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C213563",+ "digikey": "296-44740-2-ND",+ "mouser": "595-TPS92515HVQDGQTQ"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T23:47:54Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-44740-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS92515HVQDGQTQ",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "COFF",+ "type": "input",+ "description": "Input for OFF-time control; connect resistor from VLED and capacitor to GND to set OFF-time threshold to 1.0 V nominal."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_out",+ "description": "5-V regulated output from internal regulator; nominal 5.0 V, range 4.8 to 5.2 V with external load up to 500 µA; use 1 µF to 10 µF decoupling capacitor."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; connect to circuit ground plane and thermal pad."+ },+ {+ "number": "4",+ "name": "BOOT",+ "type": "input",+ "description": "Gate drive supply input; connect ceramic capacitor between BOOT and SW, and diode from VCC to BOOT; UVLO threshold 2.0 to 3.5 V with 125 mV hysteresis; maximum 70.5 V to GND."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Internal N-channel FET source output; connect to output inductor; integrated FET RDS(on) 290 mΩ typical at 25°C, rising to 600 mΩ at 150°C; maximum 65 V to GND."+ },+ {+ "number": "6",+ "name": "DRN",+ "type": "input",+ "description": "Internal N-channel FET drain input; connect to CSN node for peak current detection; maximum 65 V to GND for TPS92515HV."+ },+ {+ "number": "7",+ "name": "CSN",+ "type": "input",+ "description": "Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current monitoring; threshold 224 to 251 mV at VIADJ = VCC, or 211.5 to 223.5 mV at VIADJ = 2.2 V."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage and current sense positive; operating range 5.5 to 65 V for TPS92515HV; UVLO threshold 4.65 to 5.15 V falling with 150 to 225 mV hysteresis; maximum 65 V to GND."+ },+ {+ "number": "9",+ "name": "PWM",+ "type": "input",+ "description": "PWM dimming input and device enable; threshold 0.95 to 1.05 V rising with 50 to 150 mV hysteresis; includes 100 µA pulldown when low; connect to VCC if not used."+ },+ {+ "number": "10",+ "name": "IADJ",+ "type": "input",+ "description": "Analog current adjust input; sets peak current threshold via internal 10:1 divider with 2.4 V clamp; practical range 0.5 to 5.5 V with best accuracy at 2.2 V or lower."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package thermal pad (PowerPAD) present per PAGE 3 and PAGE 37-40 package outline but does not have a",+ "exposed pad 11 added from the footprint"+ ],+ "pages_sent": 41,+ "cost_usd": 0.4445,+ "at": "2026-09-26T23:47:36"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps92515-q1",+ "pages": 41,+ "sha256": "b6e415ec88013b0b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}