component
TPS92515HVDGQR
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS92515HVDGQR++**Texas Instruments** · LED Drivers · MSOP-10-EP++TPS92515HVDGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COFF | input | OFF-timer input; connect resistor from output voltage and capacitor to GND to set OFF-time, threshold voltage 0.95 V to 1.05 V. |+| 2 | VCC | power_out | 5-V regulated regulator output (4.8 V to 5.2 V nominal) with up to 500 µA external load capability; use decoupling capacitor to ground. |+| 3 | GND | power_in | Device ground reference and connection point for thermal pad dissipation. |+| 4 | BOOT | input | Bootstrap supply input; connect ceramic capacitor between BOOT and SW, and external diode from VCC to power high-side gate driver, absolute maximum −0.3 V to 70.5 V. |+| 5 | SW | output | Switching node output; internal FET source terminal connects to output inductor and floats between ground and VIN. |+| 6 | DRN | input | Internal FET drain input; must connect to CSN node for proper high-side current sensing. |+| 7 | CSN | input | Current sense negative input; connect sense resistor from VIN to CSN with peak voltage threshold of 224 mV to 251 mV (at VIADJ = VCC). |+| 8 | VIN | power_in | Input power supply (5.5 V to 65 V for TPS92515HV) and positive terminal for high-side current sense measurement. |+| 9 | PWM | input | PWM dimming input with rising threshold 0.95 V to 1.05 V; enables pulse-width modulation of output current, tie to VCC if not used, 100 µA pull-down when low. |+| 10 | IADJ | input | Analog output current adjust input (−0.3 V to 5.5 V) with internal 10:1 divider and 2.4 V clamp; sets peak current threshold, use 2.2 V or lower for optimum accuracy. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS92515HVDGQR`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps92515hvdgqr-etched.step` / `tps92515hvdgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92515hvdgqr.step` / `tps92515hvdgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92515-q1) (41 pp, sha256 `b6e415ec88013b0b`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92515hvdgqr-datasheet.pdf)
page.jsonadded+163@@ -0,0 +1,163 @@+{+ "slug": "tps92515hvdgqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps92515hvdgqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps92515hvdgqr.kicad_sym",+ "tps92515hvdgqr.kicad_mod",+ "tps92515hvdgqr.glb",+ "tps92515hvdgqr.step",+ "tps92515hvdgqr.lbr",+ "docs/hero.png",+ "docs/tps92515hvdgqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS92515HVDGQR",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515-q1",+ "parts": {+ "symbol": "tps92515hvdgqr.kicad_sym",+ "footprint": "tps92515hvdgqr.kicad_mod",+ "model_3d": "tps92515hvdgqr-etched.glb",+ "model_3d_plain": "tps92515hvdgqr.glb",+ "model_3d_step": "tps92515hvdgqr-etched.step",+ "model_3d_step_plain": "tps92515hvdgqr.step",+ "lbr": "tps92515hvdgqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C213553"+ },+ "pins": [+ {+ "number": "1",+ "name": "COFF",+ "type": "input",+ "description": "OFF-timer input; connect resistor from output voltage and capacitor to GND to set OFF-time, threshold voltage 0.95 V to 1.05 V."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_out",+ "description": "5-V regulated regulator output (4.8 V to 5.2 V nominal) with up to 500 µA external load capability; use decoupling capacitor to ground."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference and connection point for thermal pad dissipation."+ },+ {+ "number": "4",+ "name": "BOOT",+ "type": "input",+ "description": "Bootstrap supply input; connect ceramic capacitor between BOOT and SW, and external diode from VCC to power high-side gate driver, absolute maximum −0.3 V to 70.5 V."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Switching node output; internal FET source terminal connects to output inductor and floats between ground and VIN."+ },+ {+ "number": "6",+ "name": "DRN",+ "type": "input",+ "description": "Internal FET drain input; must connect to CSN node for proper high-side current sensing."+ },+ {+ "number": "7",+ "name": "CSN",+ "type": "input",+ "description": "Current sense negative input; connect sense resistor from VIN to CSN with peak voltage threshold of 224 mV to 251 mV (at VIADJ = VCC)."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Input power supply (5.5 V to 65 V for TPS92515HV) and positive terminal for high-side current sense measurement."+ },+ {+ "number": "9",+ "name": "PWM",+ "type": "input",+ "description": "PWM dimming input with rising threshold 0.95 V to 1.05 V; enables pulse-width modulation of output current, tie to VCC if not used, 100 µA pull-down when low."+ },+ {+ "number": "10",+ "name": "IADJ",+ "type": "input",+ "description": "Analog output current adjust input (−0.3 V to 5.5 V) with internal 10:1 divider and 2.4 V clamp; sets peak current threshold, use 2.2 V or lower for optimum accuracy."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: User provided package hint as MSOP-10-EP, but datasheet specifies HVSSOP (DGQ) 10-Pin with PowerPAD;",+ "exposed pad 11 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 41,+ "cost_usd": 0.4368,+ "at": "2026-09-23T20:46:42"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps92515-q1",+ "pages": 41,+ "sha256": "b6e415ec88013b0b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}