component
TPS92515HVDGQR
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -44,7 +44,7 @@ "number": "2", "name": "VCC", "type": "power_out",- "description": "5-V regulated regulator output (4.8 V to 5.2 V nominal) with up to 500 \u00b5A external load capability; use decoupling capacitor to ground."+ "description": "5-V regulated regulator output (4.8 V to 5.2 V nominal) with up to 500 µA external load capability; use decoupling capacitor to ground." }, { "number": "3",@@ -56,7 +56,7 @@ "number": "4", "name": "BOOT", "type": "input",- "description": "Bootstrap supply input; connect ceramic capacitor between BOOT and SW, and external diode from VCC to power high-side gate driver, absolute maximum \u22120.3 V to 70.5 V."+ "description": "Bootstrap supply input; connect ceramic capacitor between BOOT and SW, and external diode from VCC to power high-side gate driver, absolute maximum −0.3 V to 70.5 V." }, { "number": "5",@@ -86,13 +86,13 @@ "number": "9", "name": "PWM", "type": "input",- "description": "PWM dimming input with rising threshold 0.95 V to 1.05 V; enables pulse-width modulation of output current, tie to VCC if not used, 100 \u00b5A pull-down when low."+ "description": "PWM dimming input with rising threshold 0.95 V to 1.05 V; enables pulse-width modulation of output current, tie to VCC if not used, 100 µA pull-down when low." }, { "number": "10", "name": "IADJ", "type": "input",- "description": "Analog output current adjust input (\u22120.3 V to 5.5 V) with internal 10:1 divider and 2.4 V clamp; sets peak current threshold, use 2.2 V or lower for optimum accuracy."+ "description": "Analog output current adjust input (−0.3 V to 5.5 V) with internal 10:1 divider and 2.4 V clamp; sets peak current threshold, use 2.2 V or lower for optimum accuracy." }, { "number": "11",@@ -180,5 +180,8 @@ "docs/tps92515hvdgqr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }