component
TPS92515DGQR
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS92515DGQR++**Texas Instruments** · LED Drivers · MSOP-10-EP++TPS92515DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COFF | input | OFF-time setting node; connect a resistor from VOUT and a capacitor to GND to set the OFF-time. |+| 2 | VCC | power_out | Regulated 5-V supply output from internal voltage regulator; connect a decoupling capacitor from VCC to ground. |+| 3 | GND | power_in | Ground reference and power return. |+| 4 | BOOT | input | Bootstrap supply input for high-side FET gate drive; connect a ceramic capacitor between BOOT and SW and a diode from VCC to BOOT. |+| 5 | SW | output | Internal FET source node; connect to output inductor. |+| 6 | DRN | input | Internal FET drain node for current sensing; connect to CSN node for high-side current measurement. |+| 7 | CSN | input | Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current control. |+| 8 | VIN | power_in | Main input voltage supply (5.5 V to 42 V for TPS92515) and current sense positive reference. |+| 9 | PWM | input | Pulse-width modulation dimming input; output current is PWM dimmed from maximum analog controlled level, or connect to VCC if not used. |+| 10 | IADJ | input | Analog current adjust input; connect to external divider, reference, or tie directly to VCC. |+| 11 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | LED Drivers |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS92515DGQR`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps92515dgqr-etched.step` / `tps92515dgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92515dgqr.step` / `tps92515dgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92515) (41 pp, sha256 `b6e415ec88013b0b`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps92515dgqr-datasheet.pdf)
page.jsonadded+179@@ -0,0 +1,179 @@+{+ "slug": "tps92515dgqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps92515dgqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps92515dgqr.kicad_sym",+ "tps92515dgqr.kicad_mod",+ "tps92515dgqr.glb",+ "tps92515dgqr.step",+ "tps92515dgqr.lbr",+ "docs/hero.png",+ "docs/tps92515dgqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps92515dgqr-hero.glb",+ "tps92515dgqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS92515DGQR",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps92515",+ "parts": {+ "symbol": "tps92515dgqr.kicad_sym",+ "footprint": "tps92515dgqr.kicad_mod",+ "model_3d": "tps92515dgqr-hero.glb",+ "model_3d_plain": "tps92515dgqr.glb",+ "model_3d_step": "tps92515dgqr-etched.step",+ "model_3d_step_plain": "tps92515dgqr.step",+ "lbr": "tps92515dgqr.lbr"+ },+ "distributor_links": {+ "lcsc": 2678910,+ "digikey": "296-46899-2-ND",+ "mouser": "595-TPS92515DGQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T08:45:15Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-46899-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS92515DGQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "COFF",+ "type": "input",+ "description": "OFF-time setting node; connect a resistor from VOUT and a capacitor to GND to set the OFF-time."+ },+ {+ "number": "2",+ "name": "VCC",+ "type": "power_out",+ "description": "Regulated 5-V supply output from internal voltage regulator; connect a decoupling capacitor from VCC to ground."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference and power return."+ },+ {+ "number": "4",+ "name": "BOOT",+ "type": "input",+ "description": "Bootstrap supply input for high-side FET gate drive; connect a ceramic capacitor between BOOT and SW and a diode from VCC to BOOT."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Internal FET source node; connect to output inductor."+ },+ {+ "number": "6",+ "name": "DRN",+ "type": "input",+ "description": "Internal FET drain node for current sensing; connect to CSN node for high-side current measurement."+ },+ {+ "number": "7",+ "name": "CSN",+ "type": "input",+ "description": "Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current control."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Main input voltage supply (5.5 V to 42 V for TPS92515) and current sense positive reference."+ },+ {+ "number": "9",+ "name": "PWM",+ "type": "input",+ "description": "Pulse-width modulation dimming input; output current is PWM dimmed from maximum analog controlled level, or connect to VCC if not used."+ },+ {+ "number": "10",+ "name": "IADJ",+ "type": "input",+ "description": "Analog current adjust input; connect to external divider, reference, or tie directly to VCC."+ },+ {+ "number": "11",+ "name": "Thermal pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package mismatch: User requested MSOP-10-EP, but datasheet specifies HVSSOP (DGQ) package for MPN TP",+ "exposed pad 11 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 12,+ "cost_usd": 0.117,+ "at": "2026-10-03T08:44:51"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps92515",+ "pages": 41,+ "sha256": "b6e415ec88013b0b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}