component
TPS80010ARSMR
Public Made by Adomby adom
Texas Instruments Power Management - Specialized, VQFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# TPS80010ARSMR++**Texas Instruments** · Power Management - Specialized · VQFN-32-EP(4x4)++TPS80010ARSMR from Texas Instruments, in a VQFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND_BUCK | power_in | Buck converter ground. |+| 2 | SW_BUCK | output | Buck converter switching output, connected to the inductor. |+| 3 | VIN_BUCK | power_in | Buck converter power supply input; VIN_BUCK and VIN_BOOST/PP_BAT must be 1.95 V to 3.6 V (VBAT recommended operating range). |+| 4 | EN_BUCK | input | Buck converter enable input. |+| 5 | GND2 | power_in | Device ground. |+| 6 | MODE_BUCK | input | Buck converter mode control: high selects PWM, low selects PFM. |+| 7 | VO_BOOST | power_out | Boost converter regulated output. |+| 8 | SW_BOOST | bidirectional | Boost converter switching node, connected to the inductor. |+| 9 | GND_BOOST | power_in | Boost converter ground. |+| 10 | GND | power_in | Ground. |+| 11 | VIN_BOOST | power_in | Boost converter power supply input. |+| 12 | FB_BOOST | input | Boost converter feedback input. |+| 13 | IN_VM | input | Boost post-regulation LDO input; connect externally to VO_BOOST. |+| 14 | OUT_VM | power_out | Boost post-regulation LDO output. |+| 15 | BAT_CHECK | output | Battery monitor switch output; connect to ADC for battery-level check. |+| 16 | TEST2 | output | Test pin 2; do not connect. |+| 17 | GND_FALSELOAD | power_in | False load ground (datasheet lists direction as O; typed here as ground per KiCad ground convention). |+| 18 | BAT_FALSELOAD | input | Battery monitor input for false-load check. |+| 19 | PP_BAT | input | Battery input for level check; the battery input range is 1.95 V to 3.6 V. |+| 20 | GND3 | power_in | Device ground. |+| 21 | PG | output | Buck power-good output; high when VBUCK is greater than 1.7 V. |+| 22 | TEST1 | bidirectional | Test pin 1; tie to GND. |+| 23 | OUT_VIO | power_out | Load switch 1 output. |+| 24 | OUT_VIO | power_out | Load switch 1 output (second pin of the same net). |+| 25 | IN_VIO | power_in | Internal I/O power supply and load switch 1 input; connect externally to buck output. Digital I/O operating voltage 1.8 V up to VBAT. |+| 26 | IN_VIO | power_in | Internal I/O power supply and load switch 1 input (second pin of the same net); connect externally to buck output. |+| 27 | EN_SW1 | input | Buck load switch (SW1) enable input. |+| 28 | BAT_FALSELOAD_EN | input | Battery false-load switch enable input. |+| 29 | FB_BUCK | input | Buck converter feedback input. |+| 30 | EN_BAT_CHECK | input | Battery-check path enable input. |+| 31 | EN_LDO | input | Boost post-regulation LDO enable input. |+| 32 | EN_BOOST | input | Boost converter enable input. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TPS80010ARSMR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`+- 3D model: VQFN-32-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps80010arsmr-etched.step` / `tps80010arsmr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps80010arsmr.step` / `tps80010arsmr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps80010) (29 pp, sha256 `562e599de4ec7477`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps80010arsmr-datasheet.pdf)
page.jsonadded+351@@ -0,0 +1,351 @@+{+ "slug": "tps80010arsmr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Management - Specialized, VQFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps80010arsmr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps80010arsmr.kicad_sym",+ "tps80010arsmr.kicad_mod",+ "tps80010arsmr.glb",+ "tps80010arsmr.step",+ "tps80010arsmr.lbr",+ "docs/hero.png",+ "docs/tps80010arsmr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps80010arsmr-hero.glb",+ "tps80010arsmr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS80010ARSMR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32-EP(4x4)",+ "pin_count": 33,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Management - Specialized",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps80010",+ "parts": {+ "symbol": "tps80010arsmr.kicad_sym",+ "footprint": "tps80010arsmr.kicad_mod",+ "model_3d": "tps80010arsmr-hero.glb",+ "model_3d_plain": "tps80010arsmr.glb",+ "model_3d_step": "tps80010arsmr-etched.step",+ "model_3d_step_plain": "tps80010arsmr.step",+ "lbr": "tps80010arsmr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2155964",+ "digikey": "296-27624-2-ND",+ "mouser": "595-TPS80010ARSMR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:37:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-27624-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS80010ARSMR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND_BUCK",+ "type": "power_in",+ "description": "Buck converter ground."+ },+ {+ "number": "2",+ "name": "SW_BUCK",+ "type": "output",+ "description": "Buck converter switching output, connected to the inductor."+ },+ {+ "number": "3",+ "name": "VIN_BUCK",+ "type": "power_in",+ "description": "Buck converter power supply input; VIN_BUCK and VIN_BOOST/PP_BAT must be 1.95 V to 3.6 V (VBAT recommended operating range)."+ },+ {+ "number": "4",+ "name": "EN_BUCK",+ "type": "input",+ "description": "Buck converter enable input."+ },+ {+ "number": "5",+ "name": "GND2",+ "type": "power_in",+ "description": "Device ground."+ },+ {+ "number": "6",+ "name": "MODE_BUCK",+ "type": "input",+ "description": "Buck converter mode control: high selects PWM, low selects PFM."+ },+ {+ "number": "7",+ "name": "VO_BOOST",+ "type": "power_out",+ "description": "Boost converter regulated output."+ },+ {+ "number": "8",+ "name": "SW_BOOST",+ "type": "bidirectional",+ "description": "Boost converter switching node, connected to the inductor."+ },+ {+ "number": "9",+ "name": "GND_BOOST",+ "type": "power_in",+ "description": "Boost converter ground."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "11",+ "name": "VIN_BOOST",+ "type": "power_in",+ "description": "Boost converter power supply input."+ },+ {+ "number": "12",+ "name": "FB_BOOST",+ "type": "input",+ "description": "Boost converter feedback input."+ },+ {+ "number": "13",+ "name": "IN_VM",+ "type": "input",+ "description": "Boost post-regulation LDO input; connect externally to VO_BOOST."+ },+ {+ "number": "14",+ "name": "OUT_VM",+ "type": "power_out",+ "description": "Boost post-regulation LDO output."+ },+ {+ "number": "15",+ "name": "BAT_CHECK",+ "type": "output",+ "description": "Battery monitor switch output; connect to ADC for battery-level check."+ },+ {+ "number": "16",+ "name": "TEST2",+ "type": "output",+ "description": "Test pin 2; do not connect."+ },+ {+ "number": "17",+ "name": "GND_FALSELOAD",+ "type": "power_in",+ "description": "False load ground (datasheet lists direction as O; typed here as ground per KiCad ground convention)."+ },+ {+ "number": "18",+ "name": "BAT_FALSELOAD",+ "type": "input",+ "description": "Battery monitor input for false-load check."+ },+ {+ "number": "19",+ "name": "PP_BAT",+ "type": "input",+ "description": "Battery input for level check; the battery input range is 1.95 V to 3.6 V."+ },+ {+ "number": "20",+ "name": "GND3",+ "type": "power_in",+ "description": "Device ground."+ },+ {+ "number": "21",+ "name": "PG",+ "type": "output",+ "description": "Buck power-good output; high when VBUCK is greater than 1.7 V."+ },+ {+ "number": "22",+ "name": "TEST1",+ "type": "bidirectional",+ "description": "Test pin 1; tie to GND."+ },+ {+ "number": "23",+ "name": "OUT_VIO",+ "type": "power_out",+ "description": "Load switch 1 output."+ },+ {+ "number": "24",+ "name": "OUT_VIO",+ "type": "power_out",+ "description": "Load switch 1 output (second pin of the same net)."+ },+ {+ "number": "25",+ "name": "IN_VIO",+ "type": "power_in",+ "description": "Internal I/O power supply and load switch 1 input; connect externally to buck output. Digital I/O operating voltage 1.8 V up to VBAT."+ },+ {+ "number": "26",+ "name": "IN_VIO",+ "type": "power_in",+ "description": "Internal I/O power supply and load switch 1 input (second pin of the same net); connect externally to buck output."+ },+ {+ "number": "27",+ "name": "EN_SW1",+ "type": "input",+ "description": "Buck load switch (SW1) enable input."+ },+ {+ "number": "28",+ "name": "BAT_FALSELOAD_EN",+ "type": "input",+ "description": "Battery false-load switch enable input."+ },+ {+ "number": "29",+ "name": "FB_BUCK",+ "type": "input",+ "description": "Buck converter feedback input."+ },+ {+ "number": "30",+ "name": "EN_BAT_CHECK",+ "type": "input",+ "description": "Battery-check path enable input."+ },+ {+ "number": "31",+ "name": "EN_LDO",+ "type": "input",+ "description": "Boost post-regulation LDO enable input."+ },+ {+ "number": "32",+ "name": "EN_BOOST",+ "type": "input",+ "description": "Boost converter enable input."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package is RSM 32-pin VQFN (4 mm x 4 mm). The datasheet mentions a thermal pad in the pin diagram bu; Pin 17 GND_FALSELOAD is listed as direction O in the datasheet table; it was typed as power_in becau; Pins 23/24 (OUT_VIO), 25/26 (IN_VIO) are shared nets with duplicate pin numbers; each pin is listed ",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0712,+ "at": "2026-10-08T15:36:47"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps80010",+ "pages": 29,+ "sha256": "562e599de4ec7477",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps80010arsmr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4,+ 4,+ 0.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7b482a511cdf2cf875c31931f9fea7f745b8dac2ea6203531cd6604f40a290cb",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps80010arsmr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4,+ 4,+ 0.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e60e557bcd5e0c9a1945919544a55b001dc74eee2ce91542a7ebd7d364f00e8a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}