← Commit history

Initial commit: component/tps7b6850qpwprq1

Ray ·6b28dc2791 ·
2 files changed +336
README.mdadded+66
@@ -0,0 +1,66 @@+# TPS7B6850QPWPRQ1++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-28++TPS7B6850QPWPRQ1 from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power-supply pin operating from 4V to 40V with transient overvoltage rating to 45V. |+| 2 | NC | unconnected | No internal connection. |+| 3 | NC | unconnected | No internal connection. |+| 4 | EN | input | Device enable input with 0.7V low-voltage and 2V high-voltage thresholds for controlling power state. |+| 5 | FSEL | input | Oscillator frequency selection input with 0.7V/2V thresholds selecting high-frequency (low) or low-frequency (high) mode. |+| 6 | WTS | input | Watchdog type selection input with 0.7V/2V thresholds selecting window watchdog (low) or standard watchdog (high) mode. |+| 7 | NC | unconnected | No internal connection. |+| 8 | GND | power_in | Ground reference. |+| 9 | NC | unconnected | No internal connection. |+| 10 | NC | unconnected | No internal connection. |+| 11 | ROSC | output | Watchdog timer frequency adjustment output pin providing 1V reference for external resistor connection to ground. |+| 12 | DELAY | output | Power-good delay adjustment output pin for charging external capacitor to set power-on-reset delay up to 900µs. |+| 13 | WD | input | Watchdog service signal input requiring minimum 100µs high pulse at 30%-70% VOUT thresholds with 10% hysteresis. |+| 14 | NC | unconnected | No internal connection. |+| 15 | WDO | tri_state | Watchdog status open-drain output pulled low on fault condition and held high through external pull-up resistor. |+| 16 | WD_EN | input | Watchdog enable control input with 0.7V/2V thresholds to enable (low) or disable (high) watchdog function. |+| 17 | NC | unconnected | No internal connection. |+| 18 | WRS | input | Window watchdog ratio selection input with 30%-70% thresholds selecting 1:1 (low) or 8:1 (high) open-to-closed ratio. |+| 19 | NC | unconnected | No internal connection. |+| 20 | NC | unconnected | No internal connection. |+| 21 | GND | power_in | Ground reference. |+| 22 | NC | unconnected | No internal connection. |+| 23 | NC | unconnected | No internal connection. |+| 24 | PG | tri_state | Power-good status open-drain output indicating regulation, pulled low below threshold and held high through pull-up above threshold. |+| 25 | PGADJ | output | Power-good threshold adjustment output providing 1.1V reference for external resistor divider to set threshold from 89.6% to 93.6% of VOUT. |+| 26 | NC | unconnected | No internal connection. |+| 27 | NC | unconnected | No internal connection. |+| 28 | OUT | power_out | Regulated output voltage pin supplying 3.3V or 5V at 0-500mA with ±2% accuracy and 800mV maximum dropout at 500mA. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28 |+| Category | Power Management (PMIC) |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `TPS7B6850QPWPRQ1`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `tps7b6850qpwprq1-etched.step` / `tps7b6850qpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7b6850qpwprq1.step` / `tps7b6850qpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7b68-q1) (34 pp, sha256 `5f1b0dbf73658a5f`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps7b6850qpwprq1-datasheet.pdf)
page.jsonadded+270
@@ -0,0 +1,270 @@+{+  "slug": "tps7b6850qpwprq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps7b6850qpwprq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps7b6850qpwprq1.kicad_sym",+    "tps7b6850qpwprq1.kicad_mod",+    "tps7b6850qpwprq1.glb",+    "tps7b6850qpwprq1.step",+    "tps7b6850qpwprq1.lbr",+    "docs/hero.png",+    "docs/tps7b6850qpwprq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS7B6850QPWPRQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-28",+    "pin_count": 29,+    "category": "Power Management (PMIC)",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7b68-q1",+    "parts": {+      "symbol": "tps7b6850qpwprq1.kicad_sym",+      "footprint": "tps7b6850qpwprq1.kicad_mod",+      "model_3d": "tps7b6850qpwprq1-etched.glb",+      "model_3d_plain": "tps7b6850qpwprq1.glb",+      "model_3d_step": "tps7b6850qpwprq1-etched.step",+      "model_3d_step_plain": "tps7b6850qpwprq1.step",+      "lbr": "tps7b6850qpwprq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C3029629"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input power-supply pin operating from 4V to 40V with transient overvoltage rating to 45V."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Device enable input with 0.7V low-voltage and 2V high-voltage thresholds for controlling power state."+      },+      {+        "number": "5",+        "name": "FSEL",+        "type": "input",+        "description": "Oscillator frequency selection input with 0.7V/2V thresholds selecting high-frequency (low) or low-frequency (high) mode."+      },+      {+        "number": "6",+        "name": "WTS",+        "type": "input",+        "description": "Watchdog type selection input with 0.7V/2V thresholds selecting window watchdog (low) or standard watchdog (high) mode."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "11",+        "name": "ROSC",+        "type": "output",+        "description": "Watchdog timer frequency adjustment output pin providing 1V reference for external resistor connection to ground."+      },+      {+        "number": "12",+        "name": "DELAY",+        "type": "output",+        "description": "Power-good delay adjustment output pin for charging external capacitor to set power-on-reset delay up to 900µs."+      },+      {+        "number": "13",+        "name": "WD",+        "type": "input",+        "description": "Watchdog service signal input requiring minimum 100µs high pulse at 30%-70% VOUT thresholds with 10% hysteresis."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "15",+        "name": "WDO",+        "type": "tri_state",+        "description": "Watchdog status open-drain output pulled low on fault condition and held high through external pull-up resistor."+      },+      {+        "number": "16",+        "name": "WD_EN",+        "type": "input",+        "description": "Watchdog enable control input with 0.7V/2V thresholds to enable (low) or disable (high) watchdog function."+      },+      {+        "number": "17",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "18",+        "name": "WRS",+        "type": "input",+        "description": "Window watchdog ratio selection input with 30%-70% thresholds selecting 1:1 (low) or 8:1 (high) open-to-closed ratio."+      },+      {+        "number": "19",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "20",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "21",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "22",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "23",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "24",+        "name": "PG",+        "type": "tri_state",+        "description": "Power-good status open-drain output indicating regulation, pulled low below threshold and held high through pull-up above threshold."+      },+      {+        "number": "25",+        "name": "PGADJ",+        "type": "output",+        "description": "Power-good threshold adjustment output providing 1.1V reference for external resistor divider to set threshold from 89.6% to 93.6% of VOUT."+      },+      {+        "number": "26",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "27",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "28",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage pin supplying 3.3V or 5V at 0-500mA with ±2% accuracy and 800mV maximum dropout at 500mA."+      },+      {+        "number": "29",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin WTS is listed as 'O' (Output) in the Pin Functions TYPE column on page 4, but the electrical cha",+          "exposed pad 29 added from the footprint"+        ],+        "pages_sent": 34,+        "cost_usd": 0.4605,+        "at": "2026-09-23T09:51:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps7b68-q1",+        "pages": 34,+        "sha256": "5f1b0dbf73658a5f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 29,+        "described": 29,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file