component
TPS7B6701QPWPRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -53,7 +53,7 @@ "number": "1", "name": "RESET", "type": "output",- "description": "Output ready signal with open-drain configuration, pulled low (VOL \u2264 0.4V at IOL = 0.5mA) when regulated output voltage falls below 89.6% of set value after 55-420\u00b5s deglitch delay."+ "description": "Output ready signal with open-drain configuration, pulled low (VOL ≤ 0.4V at IOL = 0.5mA) when regulated output voltage falls below 89.6% of set value after 55-420µs deglitch delay." }, { "number": "2",@@ -65,19 +65,19 @@ "number": "3", "name": "DELAY", "type": "output",- "description": "Reset pulse delay adjustment pin; external capacitor (100pF to 500nF) connected to GND sets power-on-reset delay time with constant charging current 6-14\u00b5A (typical 9.5\u00b5A) until 1V threshold."+ "description": "Reset pulse delay adjustment pin; external capacitor (100pF to 500nF) connected to GND sets power-on-reset delay time with constant charging current 6-14µA (typical 9.5µA) until 1V threshold." }, { "number": "4", "name": "VOUT", "type": "power_out",- "description": "Regulated output voltage for adjustable version (1.5V to 18V), regulated within \u00b12% from input 4V-40V, maximum output current 450mA with 160-450mV dropout voltage depending on load."+ "description": "Regulated output voltage for adjustable version (1.5V to 18V), regulated within ±2% from input 4V-40V, maximum output current 450mA with 160-450mV dropout voltage depending on load." }, { "number": "5", "name": "ADJ", "type": "input",- "description": "Feedback pin for output voltage adjustment, connected to 1.233V \u00b1 2% bandgap reference through external resistor divider to set VOUT from 1.5V to 18V; maximum absolute voltage 22V, divider sum (R1+R2) 10k\u03a9-100k\u03a9."+ "description": "Feedback pin for output voltage adjustment, connected to 1.233V ± 2% bandgap reference through external resistor divider to set VOUT from 1.5V to 18V; maximum absolute voltage 22V, divider sum (R1+R2) 10kΩ-100kΩ." }, { "number": "6",@@ -137,7 +137,7 @@ "number": "15", "name": "EN", "type": "input",- "description": "Enable input with high-voltage tolerance to 40V; logic high (\u22651.7V) activates regulator, logic low (\u22640.4V) disables regulator reducing quiescent current to <4\u00b5A."+ "description": "Enable input with high-voltage tolerance to 40V; logic high (≥1.7V) activates regulator, logic low (≤0.4V) disables regulator reducing quiescent current to <4µA." }, { "number": "16",@@ -161,7 +161,7 @@ "number": "19", "name": "VIN", "type": "power_in",- "description": "Input power-supply voltage with operating range 4V to 40V (absolute maximum 45V transient), UVLO threshold 2.6V with 1V hysteresis; bypass capacitors (47\u00b5F electrolytic and 0.1\u00b5F ceramic) recommended."+ "description": "Input power-supply voltage with operating range 4V to 40V (absolute maximum 45V transient), UVLO threshold 2.6V with 1V hysteresis; bypass capacitors (47µF electrolytic and 0.1µF ceramic) recommended." }, { "number": "20",@@ -173,7 +173,7 @@ "number": "21", "name": "PowerPAD", "type": "passive",- "description": "Exposed thermal pad for heat dissipation; solder to enhanced copper area on PCB for improved thermal performance with junction-to-ambient thermal resistance 44.9\u00b0C/W and junction-to-board 23.6\u00b0C/W."+ "description": "Exposed thermal pad for heat dissipation; solder to enhanced copper area on PCB for improved thermal performance with junction-to-ambient thermal resistance 44.9°C/W and junction-to-board 23.6°C/W." } ], "provenance": {@@ -253,5 +253,8 @@ "docs/tps7b6701qpwprq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }