TPS7A4533DCQR

@@ -53,13 +53,13 @@         "number": "1",         "name": "SHDN",         "type": "input",-        "description": "Shutdown input; output disabled when pulled low; if unused, connect to VIN; supports 5-V, 3-V, or open-collector logic with typical 3 \u03bcA current draw."+        "description": "Shutdown input; output disabled when pulled low; if unused, connect to VIN; supports 5-V, 3-V, or open-collector logic with typical 3 μA current draw."       },       {         "number": "2",         "name": "IN",         "type": "power_in",-        "description": "Power supply input; requires 1-10 \u03bcF ceramic bypass capacitor if >6 inches from main filter capacitor; withstands \u00b120 V reverse voltage with inherent diode-like protection."+        "description": "Power supply input; requires 1-10 μF ceramic bypass capacitor if >6 inches from main filter capacitor; withstands ±20 V reverse voltage with inherent diode-like protection."       },       {         "number": "3",@@ -71,13 +71,13 @@         "number": "4",         "name": "OUT",         "type": "power_out",-        "description": "Regulated 3.3 V output; requires minimum 10 \u03bcF ceramic capacitor with ESR \u22643 \u03a9 for stability; supplies up to 1.5 A to load."+        "description": "Regulated 3.3 V output; requires minimum 10 μF ceramic capacitor with ESR ≤3 Ω for stability; supplies up to 1.5 A to load."       },       {         "number": "5",         "name": "SENSE",         "type": "input",-        "description": "Feedback input to error amplifier; connect to OUT for regulation or to load for Kelvin sensing to compensate voltage drops; 600 \u03bcA bias current at rated output voltage."+        "description": "Feedback input to error amplifier; connect to OUT for regulation or to load for Kelvin sensing to compensate voltage drops; 600 μA bias current at rated output voltage."       },       {         "number": "6",@@ -118,6 +118,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps7a4533dcqr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps7a4533dcqr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "37f77813c148eaad0bbb79fca2cb75005e684554eb86d9b82a1294db178d86f6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}