← Commit history
tps7a2012pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+86−6
package.json+44−4@@ -65,7 +65,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input; voltage less than VEN(LOW) disables regulator and discharges output to GND, voltage greater than VEN(HI) enables regulator output; has internal 500k\u03a9 pulldown resistor."+ "description": "Enable input; voltage less than VEN(LOW) disables regulator and discharges output to GND, voltage greater than VEN(HI) enables regulator output; has internal 500kΩ pulldown resistor." }, { "number": "4",@@ -77,7 +77,7 @@ "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage; requires low ESR capacitor from OUT to ground for stability and uses nominal recommended value or larger per Recommended Operating Conditions; internal 150\u03a9 pulldown resistor prevents charge remaining on VOUT when regulator disabled."+ "description": "Regulated output voltage; requires low ESR capacitor from OUT to ground for stability and uses nominal recommended value or larger per Recommended Operating Conditions; internal 150Ω pulldown resistor prevents charge remaining on VOUT when regulator disabled." } ], "provenance": {@@ -112,6 +112,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps7a2012pdbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps7a2012pdbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "00685da054d0aa913485dcf3244ba048f603fa5f01a330909f207f029056a78b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -97,7 +97,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps7a2012pdbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps7a2012pdbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "00685da054d0aa913485dcf3244ba048f603fa5f01a330909f207f029056a78b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -145,4 +185,4 @@ "public": true }, "updated_at": "2026-09-25T12:42:55.570Z"-}+}