← Commit history

tps7a0525pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·92ca5fd3c4 · ·parent c51b467
2 files changed +87−7
package.json+45−5
@@ -68,7 +68,7 @@         "number": "1",         "name": "IN",         "type": "input",-        "description": "Input supply voltage pin (1.4V to 5.5V operating range); connect 1\u00b5F or larger ceramic capacitor to ground for best transient response and to minimize input source impedance."+        "description": "Input supply voltage pin (1.4V to 5.5V operating range); connect 1µF or larger ceramic capacitor to ground for best transient response and to minimize input source impedance."       },       {         "number": "2",@@ -80,7 +80,7 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable pin (active high); logic high \u22650.9V enables device, logic low \u22640.4V disables device; VEN must not exceed VIN; if enable function not required, connect EN to IN."+        "description": "Enable pin (active high); logic high ≥0.9V enables device, logic low ≤0.4V disables device; VEN must not exceed VIN; if enable function not required, connect EN to IN."       },       {         "number": "4",@@ -92,7 +92,7 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Regulated output pin (0.8V to 3.3V nominal depending on variant); maximum 200mA output current; connect 0.47\u00b5F to 22\u00b5F ceramic capacitor to ground for stability."+        "description": "Regulated output pin (0.8V to 3.3V nominal depending on variant); maximum 200mA output current; connect 0.47µF to 22µF ceramic capacitor to ground for stability."       }     ],     "provenance": {@@ -127,6 +127,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps7a0525pdbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps7a0525pdbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "25204872949c67e37eaa87abdcd1854af85ed5c13ac2a78f1c0b3b4a6080937c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -112,7 +112,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps7a0525pdbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps7a0525pdbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "25204872949c67e37eaa87abdcd1854af85ed5c13ac2a78f1c0b3b4a6080937c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -159,4 +199,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}