component
TPS79925DDCT
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# TPS79925DDCT++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5++TPS79925DDCT from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | input | Input supply voltage, minimum 2.7 V. |+| 2 | GND | power_in | Ground. The pad must be tied to GND. |+| 3 | EN | input | Driving this pin high turns on the regulator. Driving this pin low puts the regulator into shutdown mode. EN can be connected to IN if not used. |+| 4 | NR | passive | Fixed voltage versions only. Noise reduction; connecting this pin to an external capacitor bypasses noise generated by the internal band gap. This capacitor allows output noise to be reduced to very low levels. |+| 5 | OUT | output | Output of the regulator. To assure stability, a small ceramic capacitor (total typical capacitance ≥ 2 μF) is required from this pin to ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSOT-23-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `TPS79925DDCT`+- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`+- 3D model: TSOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `tps79925ddct-etched.step` / `tps79925ddct-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps79925ddct.step` / `tps79925ddct.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps799) (49 pp, sha256 `c8a9038c1b38653a`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps79925ddct-datasheet.pdf)
page.jsonadded+180@@ -0,0 +1,180 @@+{+ "slug": "tps79925ddct",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps79925ddct",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps79925ddct.kicad_sym",+ "tps79925ddct.kicad_mod",+ "tps79925ddct.glb",+ "tps79925ddct.step",+ "tps79925ddct.lbr",+ "docs/hero.png",+ "docs/tps79925ddct-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps79925ddct-hero.glb",+ "tps79925ddct-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS79925DDCT",+ "manufacturer": "Texas Instruments",+ "package": "TSOT-23-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps799",+ "parts": {+ "symbol": "tps79925ddct.kicad_sym",+ "footprint": "tps79925ddct.kicad_mod",+ "model_3d": "tps79925ddct-hero.glb",+ "model_3d_plain": "tps79925ddct.glb",+ "model_3d_step": "tps79925ddct-etched.step",+ "model_3d_step_plain": "tps79925ddct.step",+ "lbr": "tps79925ddct.lbr"+ },+ "distributor_links": {+ "lcsc": "C2865156",+ "digikey": "296-17779-2-ND",+ "mouser": "595-TPS79925DDCT"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T08:10:09Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-17779-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS79925DDCT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "input",+ "description": "Input supply voltage, minimum 2.7 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. The pad must be tied to GND."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Driving this pin high turns on the regulator. Driving this pin low puts the regulator into shutdown mode. EN can be connected to IN if not used."+ },+ {+ "number": "4",+ "name": "NR",+ "type": "passive",+ "description": "Fixed voltage versions only. Noise reduction; connecting this pin to an external capacitor bypasses noise generated by the internal band gap. This capacitor allows output noise to be reduced to very low levels."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "output",+ "description": "Output of the regulator. To assure stability, a small ceramic capacitor (total typical capacitance ≥ 2 μF) is required from this pin to ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 16,+ "cost_usd": 0.1486,+ "at": "2026-10-07T08:09:56"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps799",+ "pages": 49,+ "sha256": "c8a9038c1b38653a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps79925ddct.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5120f0cee43ef7743cc08408d2c12f234fcac7355386e330a3a16f336e23da8d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps79925ddct-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7e171418b58b026f3a798bf324da535c771d5e6d8a8e9033641c228a62e7d60a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}