component
TPS797285DCKR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+41@@ -0,0 +1,41 @@+# TPS797285DCKR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5++TPS797285DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PG | output | Open-drain, active-high power-good output that goes high-impedance when VO exceeds about 90% of the regulated voltage and low-impedance when VO falls below about 90%; it requires a pullup resistor. |+| 2 | GND | power_in | Ground pin for the device; the layout guidance places the input and output capacitor ground returns close to this pin. |+| 3 | NC | unconnected | No connection pin, listed as NC in the datasheet pin function table. |+| 4 | IN | input | Power-supply input to the device; the recommended input voltage range is 1.8 V to 5.5 V. |+| 5 | OUT | output | Provides the regulated output voltage of the device; recommended output current is 0 to 50 mA with an output capacitor of at least 0.47 µF. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SC-70-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `TPS797285DCKR`+- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`+- 3D model: SC-70-5 (KiCad packages3D, STEP)+- 3D model files: `tps797285dckr-etched.step` / `tps797285dckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps797285dckr.step` / `tps797285dckr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps797) (21 pp, sha256 `ace5c5708757b3ce`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps797285dckr-datasheet.pdf)
page.jsonadded+182@@ -0,0 +1,182 @@+{+ "slug": "tps797285dckr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps797285dckr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps797285dckr.kicad_sym",+ "tps797285dckr.kicad_mod",+ "tps797285dckr.glb",+ "tps797285dckr.step",+ "tps797285dckr.lbr",+ "docs/hero.png",+ "docs/tps797285dckr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps797285dckr-hero.glb",+ "tps797285dckr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS797285DCKR",+ "manufacturer": "Texas Instruments",+ "package": "SC-70-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps797",+ "parts": {+ "symbol": "tps797285dckr.kicad_sym",+ "footprint": "tps797285dckr.kicad_mod",+ "model_3d": "tps797285dckr-hero.glb",+ "model_3d_plain": "tps797285dckr.glb",+ "model_3d_step": "tps797285dckr-etched.step",+ "model_3d_step_plain": "tps797285dckr.step",+ "lbr": "tps797285dckr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2873093",+ "digikey": "296-25465-2-ND",+ "mouser": "595-TPS797285DCKR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T17:08:21Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-25465-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS797285DCKR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PG",+ "type": "output",+ "description": "Open-drain, active-high power-good output that goes high-impedance when VO exceeds about 90% of the regulated voltage and low-impedance when VO falls below about 90%; it requires a pullup resistor."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin for the device; the layout guidance places the input and output capacitor ground returns close to this pin."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection pin, listed as NC in the datasheet pin function table."+ },+ {+ "number": "4",+ "name": "IN",+ "type": "input",+ "description": "Power-supply input to the device; the recommended input voltage range is 1.8 V to 5.5 V."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "output",+ "description": "Provides the regulated output voltage of the device; recommended output current is 0 to 50 mA with an output capacitor of at least 0.47 µF."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin numbers and functions come from the 'Pin Functions' table on page 4 (DCK 5-pin SC70, top vie; The datasheet lists TPS797285DCKR as SC70 (DCK), 5 pins, 3000-piece reel, so the DCK 5-pin pinout ap"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0646,+ "at": "2026-10-08T17:08:03"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps797",+ "pages": 21,+ "sha256": "ace5c5708757b3ce",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps797285dckr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps797285dckr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ca1c8f03e1e8953df3e62f3e2021dc3df5457874bce39da2813323cd170cf33d",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}