component
TPS780230300DRVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+43@@ -0,0 +1,43 @@+# TPS780230300DRVR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)++TPS780230300DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | output | Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability. |+| 2 | N/C | unconnected | Not connected. |+| 3 | VSET/FB | input | Selects the preset output voltage on fixed-voltage versions: drive below 0.4 V to select the high output voltage and drive over 1.2 V to select the low output voltage. |+| 4 | EN | input | Enable pin: drive over 1.2 V to turn on the regulator and drive below 0.4 V to put it into shutdown, reducing operating current to 18 nA typical. |+| 5 | GND | power_in | Ground pin; tie all ground pins to ground for proper operation. |+| 6 | IN | power_in | Input pin; a small capacitor (typical 1.0 μF) is needed from this pin to ground to assure stability, with input and output capacitor grounds tied to the IC ground with no significant impedance between them. |+| 7 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-6-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 7 |++## CAD (KiCad official)++- Symbol: `TPS780230300DRVR`+- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`+- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `tps780230300drvr-etched.step` / `tps780230300drvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps780230300drvr.step` / `tps780230300drvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps780) (43 pp, sha256 `57e586ec3cc7155d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps780230300drvr-datasheet.pdf)
page.jsonadded+195@@ -0,0 +1,195 @@+{+ "slug": "tps780230300drvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps780230300drvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps780230300drvr.kicad_sym",+ "tps780230300drvr.kicad_mod",+ "tps780230300drvr.glb",+ "tps780230300drvr.step",+ "tps780230300drvr.lbr",+ "docs/hero.png",+ "docs/tps780230300drvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps780230300drvr-hero.glb",+ "tps780230300drvr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS780230300DRVR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-6-EP(2x2)",+ "pin_count": 7,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps780",+ "parts": {+ "symbol": "tps780230300drvr.kicad_sym",+ "footprint": "tps780230300drvr.kicad_mod",+ "model_3d": "tps780230300drvr-hero.glb",+ "model_3d_plain": "tps780230300drvr.glb",+ "model_3d_step": "tps780230300drvr-etched.step",+ "model_3d_step_plain": "tps780230300drvr.step",+ "lbr": "tps780230300drvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2876252",+ "digikey": "296-TPS780230300DRVRTR-ND",+ "mouser": "595-TPS780230300DRVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T01:45:07Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TPS780230300DRVRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS780230300DRVR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "output",+ "description": "Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability."+ },+ {+ "number": "2",+ "name": "N/C",+ "type": "unconnected",+ "description": "Not connected."+ },+ {+ "number": "3",+ "name": "VSET/FB",+ "type": "input",+ "description": "Selects the preset output voltage on fixed-voltage versions: drive below 0.4 V to select the high output voltage and drive over 1.2 V to select the low output voltage."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Enable pin: drive over 1.2 V to turn on the regulator and drive below 0.4 V to put it into shutdown, reducing operating current to 18 nA typical."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; tie all ground pins to ground for proper operation."+ },+ {+ "number": "6",+ "name": "IN",+ "type": "power_in",+ "description": "Input pin; a small capacitor (typical 1.0 μF) is needed from this pin to ground to assure stability, with input and output capacitor grounds tied to the IC ground with no significant impedance between them."+ },+ {+ "number": "7",+ "name": "Thermal Pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The SON/WSON thermal pad is listed as a 'Thermal' pad (SON package only, connect to ground) in the p; The VSET/FB pin function described is the datasheet's general TPS780 family text. The FB (adjustable; The datasheet labels pin 6 (IN) as an input (I). It is typed here as power_in because it is the supp",+ "exposed pad 7 added from the footprint"+ ],+ "pages_sent": 10,+ "cost_usd": 0.0644,+ "at": "2026-10-08T01:44:50"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps780",+ "pages": 43,+ "sha256": "57e586ec3cc7155d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps780230300drvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps780230300drvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "32d7f38cb22b54c3cb97990702e7ca0b8de45a40f51d27ab40c71727bb18a934",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}