component
TPS76833QDR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tps76833qdr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+89−9
package.json+47−7@@ -53,13 +53,13 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Regulator ground providing return path for output and input currents with typical quiescent current of 85 \u00b5A at 1 mA load."+ "description": "Regulator ground providing return path for output and input currents with typical quiescent current of 85 µA at 1 mA load." }, { "number": "2", "name": "EN", "type": "input",- "description": "Enable input; high level (\u22651.7 V) enables the regulator, low level (\u22640.9 V) disables it and reduces quiescent current to less than 1 \u00b5A at TJ = 25\u00b0C."+ "description": "Enable input; high level (≥1.7 V) enables the regulator, low level (≤0.9 V) disables it and reduces quiescent current to less than 1 µA at TJ = 25°C." }, { "number": "3",@@ -71,19 +71,19 @@ "number": "4", "name": "IN", "type": "power_in",- "description": "Input supply voltage operating in range 2.7 V to 10 V; ceramic bypass capacitor 0.047 \u00b5F or larger recommended if device located more than few inches from power supply."+ "description": "Input supply voltage operating in range 2.7 V to 10 V; ceramic bypass capacitor 0.047 µF or larger recommended if device located more than few inches from power supply." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage (3.3 V for TPS76833) capable of delivering 0 to 1 A continuous output current with \u00b12% tolerance over specified operating conditions."+ "description": "Regulated output voltage (3.3 V for TPS76833) capable of delivering 0 to 1 A continuous output current with ±2% tolerance over specified operating conditions." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage (3.3 V for TPS76833) requiring 10 \u00b5F output capacitor with equivalent series resistance between 60 m\u03a9 and 1.5 \u03a9 for regulator stability."+ "description": "Regulated output voltage (3.3 V for TPS76833) requiring 10 µF output capacitor with equivalent series resistance between 60 mΩ and 1.5 Ω for regulator stability." }, { "number": "7",@@ -130,6 +130,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps76833qdr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps76833qdr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3b4decc416c8ef7a9599092e767253e402fdd446eb99a9222a0fc6dba6b5035c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -115,7 +115,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps76833qdr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps76833qdr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3b4decc416c8ef7a9599092e767253e402fdd446eb99a9222a0fc6dba6b5035c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -163,4 +203,4 @@ "public": true }, "updated_at": "2026-09-25T12:37:29.067Z"-}+}