component
TPS76801QPWPRQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# TPS76801QPWPRQ1++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20-EP++TPS76801QPWPRQ1 from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND/HSINK | power_in | Ground and heatsink pin. |+| 2 | GND/HSINK | power_in | Ground and heatsink pin. |+| 3 | GND | power_in | LDO ground. |+| 4 | NC | unconnected | No internal connection. |+| 5 | EN | input | Enable input; a TTL high signal shuts the regulator down, and the EN voltage is limited to -0.3 V to VI + 0.3 V. |+| 6 | IN | power_in | Regulator input; recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V. |+| 7 | IN | power_in | Regulator input; recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V. |+| 8 | NC | unconnected | No internal connection. |+| 9 | GND/HSINK | power_in | Ground and heatsink pin. |+| 10 | GND/HSINK | power_in | Ground and heatsink pin. |+| 11 | GND/HSINK | power_in | Ground and heatsink pin. |+| 12 | GND/HSINK | power_in | Ground and heatsink pin. |+| 13 | OUT | power_out | Regulated output voltage; rated up to 1 A, with an output capacitor of at least 10 µF and ESR between 50 mΩ and 1.5 Ω required. |+| 14 | OUT | power_out | Regulated output voltage; rated up to 1 A, with an output capacitor of at least 10 µF and ESR between 50 mΩ and 1.5 Ω required. |+| 15 | FB/NC | input | Feedback input that senses the output voltage for the adjustable version (Vref = 1.1834 V typ); no connect on fixed-output options. |+| 16 | PG | output | Active-high open-drain power-good output that can implement a power-on reset or low-battery indicator, with a maximum PG voltage of 16.5 V. |+| 17 | NC | unconnected | No internal connection. |+| 18 | NC | unconnected | No internal connection. |+| 19 | GND/HSINK | power_in | Ground and heatsink pin. |+| 20 | GND/HSINK | power_in | Ground and heatsink pin. |+| 21 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-20-EP |+| Category | Power Management (PMIC) |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPS76801QPWPRQ1`+- Footprint: `Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm`+- 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `tps76801qpwprq1-etched.step` / `tps76801qpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps76801qpwprq1.step` / `tps76801qpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps768-q1) (32 pp, sha256 `e77b9cc0b627fa86`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps76801qpwprq1-datasheet.pdf)
page.jsonadded+279@@ -0,0 +1,279 @@+{+ "slug": "tps76801qpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps76801qpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps76801qpwprq1.kicad_sym",+ "tps76801qpwprq1.kicad_mod",+ "tps76801qpwprq1.glb",+ "tps76801qpwprq1.step",+ "tps76801qpwprq1.lbr",+ "docs/hero.png",+ "docs/tps76801qpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps76801qpwprq1-hero.glb",+ "tps76801qpwprq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS76801QPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-20-EP",+ "pin_count": 21,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps768-q1",+ "parts": {+ "symbol": "tps76801qpwprq1.kicad_sym",+ "footprint": "tps76801qpwprq1.kicad_mod",+ "model_3d": "tps76801qpwprq1-hero.glb",+ "model_3d_plain": "tps76801qpwprq1.glb",+ "model_3d_step": "tps76801qpwprq1-etched.step",+ "model_3d_step_plain": "tps76801qpwprq1.step",+ "lbr": "tps76801qpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2879363",+ "digikey": "296-15287-2-ND",+ "mouser": "595-TPS76801QPWPRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T03:22:50Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-15287-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS76801QPWPRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "2",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "LDO ground."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Enable input; a TTL high signal shuts the regulator down, and the EN voltage is limited to -0.3 V to VI + 0.3 V."+ },+ {+ "number": "6",+ "name": "IN",+ "type": "power_in",+ "description": "Regulator input; recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V."+ },+ {+ "number": "7",+ "name": "IN",+ "type": "power_in",+ "description": "Regulator input; recommended input voltage is 2.7 V to 10 V, with an absolute maximum of 13.5 V."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "9",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "10",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "11",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "12",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "13",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage; rated up to 1 A, with an output capacitor of at least 10 µF and ESR between 50 mΩ and 1.5 Ω required."+ },+ {+ "number": "14",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage; rated up to 1 A, with an output capacitor of at least 10 µF and ESR between 50 mΩ and 1.5 Ω required."+ },+ {+ "number": "15",+ "name": "FB/NC",+ "type": "input",+ "description": "Feedback input that senses the output voltage for the adjustable version (Vref = 1.1834 V typ); no connect on fixed-output options."+ },+ {+ "number": "16",+ "name": "PG",+ "type": "output",+ "description": "Active-high open-drain power-good output that can implement a power-on reset or low-battery indicator, with a maximum PG voltage of 16.5 V."+ },+ {+ "number": "17",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "18",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "19",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "20",+ "name": "GND/HSINK",+ "type": "power_in",+ "description": "Ground and heatsink pin."+ },+ {+ "number": "21",+ "name": "Thermal pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed thermal pad is described as 'Solder the thermal pad to the board' but is not given a pri; The datasheet labels IN and OUT as 'I' and 'O'. I mapped them to KiCad power_in and power_out becaus; Pin 15 is FB/NC. The TPS76801QPWPRQ1 is the adjustable variant (TPS76801-Q1 per the orderable addend",+ "exposed pad 21 added from the footprint"+ ],+ "pages_sent": 10,+ "cost_usd": 0.0658,+ "at": "2026-10-08T03:22:27"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps768-q1",+ "pages": 32,+ "sha256": "e77b9cc0b627fa86",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps76801qpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2a703d622f4018b1dbecb9f7f2d14e125a7aa83e282f558ecb8e221543d38c99",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps76801qpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e1f1104fe928b775b14f6d1d715cc51bd66cd87ba585133dbbf4f6794029a866",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}