component
TPS767D301QPWPRQ1
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+65@@ -0,0 +1,65 @@+# TPS767D301QPWPRQ1++**Texas Instruments** · Linear Voltage Regulators (LDO) · HTSSOP-28++TPS767D301QPWPRQ1 from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No internal connection. |+| 2 | NC | unconnected | No internal connection. |+| 3 | 1GND | power_in | Regulator 1 ground reference (0 V system ground). |+| 4 | 1EN | input | Regulator 1 enable input; applying high voltage shuts down the regulator (0.8 V/2.0 V thresholds). |+| 5 | 1IN | power_in | Regulator 1 unfiltered input supply voltage (recommended 2.7 V to 10 V). |+| 6 | 1IN | power_in | Regulator 1 unfiltered input supply voltage (recommended 2.7 V to 10 V). |+| 7 | NC | unconnected | No internal connection. |+| 8 | NC | unconnected | No internal connection. |+| 9 | 2GND | power_in | Regulator 2 ground reference (0 V system ground). |+| 10 | 2EN | input | Regulator 2 enable input; applying high voltage shuts down the regulator (0.8 V/2.0 V thresholds). |+| 11 | 2IN | power_in | Regulator 2 unfiltered input supply voltage (recommended 2.7 V to 10 V). |+| 12 | 2IN | power_in | Regulator 2 unfiltered input supply voltage (recommended 2.7 V to 10 V). |+| 13 | NC | unconnected | No internal connection. |+| 14 | NC | unconnected | No internal connection. |+| 15 | NC | unconnected | No internal connection. |+| 16 | NC | unconnected | No internal connection. |+| 17 | 2OUT | power_out | Regulator 2 regulated output voltage supporting 0 mA to 1.0 A continuous output current. |+| 18 | 2OUT | power_out | Regulator 2 regulated output voltage supporting 0 mA to 1.0 A continuous output current. |+| 19 | NC | unconnected | No internal connection. |+| 20 | NC | unconnected | No internal connection. |+| 21 | NC | unconnected | No internal connection. |+| 22 | 2RESET | tri_state | Regulator 2 open-drain reset output; goes low when output voltage falls below 95% nominal with 200 ms delay. |+| 23 | 1OUT | power_out | Regulator 1 regulated output voltage supporting 0 mA to 1.0 A continuous output current. |+| 24 | 1OUT | power_out | Regulator 1 regulated output voltage supporting 0 mA to 1.0 A continuous output current. |+| 25 | 1FB/NC | input | Regulator 1 feedback input for adjustable version to program output voltage via external resistor divider. |+| 26 | NC | unconnected | No internal connection. |+| 27 | NC | unconnected | No internal connection. |+| 28 | 1RESET | tri_state | Regulator 1 open-drain reset output; goes low when output voltage falls below 95% nominal with 200 ms delay. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28 |+| Category | Power Supply Chip |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `TPS767D301QPWPRQ1`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `tps767d301qpwprq1-etched.step` / `tps767d301qpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps767d301qpwprq1.step` / `tps767d301qpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps767d3-q1) (27 pp, sha256 `1cfabd7eaafb1ff3`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps767d301qpwprq1-datasheet.pdf)
page.jsonadded+284@@ -0,0 +1,284 @@+{+ "slug": "tps767d301qpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Linear Voltage Regulators (LDO), HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps767d301qpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps767d301qpwprq1.kicad_sym",+ "tps767d301qpwprq1.kicad_mod",+ "tps767d301qpwprq1.glb",+ "tps767d301qpwprq1.step",+ "tps767d301qpwprq1.lbr",+ "docs/hero.png",+ "docs/tps767d301qpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS767D301QPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-28",+ "pin_count": 29,+ "category": "Power Supply Chip",+ "subcategory": "Linear Voltage Regulators (LDO)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps767d3-q1",+ "parts": {+ "symbol": "tps767d301qpwprq1.kicad_sym",+ "footprint": "tps767d301qpwprq1.kicad_mod",+ "model_3d": "tps767d301qpwprq1-etched.glb",+ "model_3d_plain": "tps767d301qpwprq1.glb",+ "model_3d_step": "tps767d301qpwprq1-etched.step",+ "model_3d_step_plain": "tps767d301qpwprq1.step",+ "lbr": "tps767d301qpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C485545",+ "digikey": "296-19002-2-ND",+ "mouser": "595-TPS767D301PWPRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T05:38:41Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-19002-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS767D301PWPRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "3",+ "name": "1GND",+ "type": "power_in",+ "description": "Regulator 1 ground reference (0 V system ground)."+ },+ {+ "number": "4",+ "name": "1EN",+ "type": "input",+ "description": "Regulator 1 enable input; applying high voltage shuts down the regulator (0.8 V/2.0 V thresholds)."+ },+ {+ "number": "5",+ "name": "1IN",+ "type": "power_in",+ "description": "Regulator 1 unfiltered input supply voltage (recommended 2.7 V to 10 V)."+ },+ {+ "number": "6",+ "name": "1IN",+ "type": "power_in",+ "description": "Regulator 1 unfiltered input supply voltage (recommended 2.7 V to 10 V)."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "9",+ "name": "2GND",+ "type": "power_in",+ "description": "Regulator 2 ground reference (0 V system ground)."+ },+ {+ "number": "10",+ "name": "2EN",+ "type": "input",+ "description": "Regulator 2 enable input; applying high voltage shuts down the regulator (0.8 V/2.0 V thresholds)."+ },+ {+ "number": "11",+ "name": "2IN",+ "type": "power_in",+ "description": "Regulator 2 unfiltered input supply voltage (recommended 2.7 V to 10 V)."+ },+ {+ "number": "12",+ "name": "2IN",+ "type": "power_in",+ "description": "Regulator 2 unfiltered input supply voltage (recommended 2.7 V to 10 V)."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "17",+ "name": "2OUT",+ "type": "power_out",+ "description": "Regulator 2 regulated output voltage supporting 0 mA to 1.0 A continuous output current."+ },+ {+ "number": "18",+ "name": "2OUT",+ "type": "power_out",+ "description": "Regulator 2 regulated output voltage supporting 0 mA to 1.0 A continuous output current."+ },+ {+ "number": "19",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "20",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "21",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "22",+ "name": "2RESET",+ "type": "tri_state",+ "description": "Regulator 2 open-drain reset output; goes low when output voltage falls below 95% nominal with 200 ms delay."+ },+ {+ "number": "23",+ "name": "1OUT",+ "type": "power_out",+ "description": "Regulator 1 regulated output voltage supporting 0 mA to 1.0 A continuous output current."+ },+ {+ "number": "24",+ "name": "1OUT",+ "type": "power_out",+ "description": "Regulator 1 regulated output voltage supporting 0 mA to 1.0 A continuous output current."+ },+ {+ "number": "25",+ "name": "1FB/NC",+ "type": "input",+ "description": "Regulator 1 feedback input for adjustable version to program output voltage via external resistor divider."+ },+ {+ "number": "26",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "27",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "28",+ "name": "1RESET",+ "type": "tri_state",+ "description": "Regulator 1 open-drain reset output; goes low when output voltage falls below 95% nominal with 200 ms delay."+ },+ {+ "number": "29",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 29 added from the footprint"+ ],+ "pages_sent": 27,+ "cost_usd": 0.3541,+ "at": "2026-09-27T05:38:23"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps767d3-q1",+ "pages": 27,+ "sha256": "1cfabd7eaafb1ff3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}