TPS72501DCQR

@@ -53,13 +53,13 @@         "number": "1",         "name": "FB",         "type": "input",-        "description": "For the TPS72501 adjustable version this pin (labeled RESET/FB on the generic DCQ pin diagram) is the feedback input that senses the externally divided output voltage against the internal 1.22-V bandgap reference; allowed voltage range is -0.3 V to VI + 0.3 V and feedback bias current is typically \u00b1100 nA (TPS72501 replaces the RESET function with FB on this package pin, per the datasheet note)."+        "description": "For the TPS72501 adjustable version this pin (labeled RESET/FB on the generic DCQ pin diagram) is the feedback input that senses the externally divided output voltage against the internal 1.22-V bandgap reference; allowed voltage range is -0.3 V to VI + 0.3 V and feedback bias current is typically ±100 nA (TPS72501 replaces the RESET function with FB on this package pin, per the datasheet note)."       },       {         "number": "2",         "name": "OUT",         "type": "power_out",-        "description": "Regulated output voltage pin, rated for 0 to 1-A continuous output current over -40\u00b0C to 125\u00b0C junction temperature; stable with any output capacitor, with a 10-\u00b5F capacitor recommended for improved transient response and noise performance."+        "description": "Regulated output voltage pin, rated for 0 to 1-A continuous output current over -40°C to 125°C junction temperature; stable with any output capacitor, with a 10-µF capacitor recommended for improved transient response and noise performance."       },       {         "number": "3",@@ -71,13 +71,13 @@         "number": "4",         "name": "IN",         "type": "power_in",-        "description": "Input supply voltage pin, recommended operating range 1.8 V to 6 V (absolute maximum -0.3 V to 7 V); a 1-\u00b5F or larger ceramic bypass capacitor to GND close to the device is required for stability."+        "description": "Input supply voltage pin, recommended operating range 1.8 V to 6 V (absolute maximum -0.3 V to 7 V); a 1-µF or larger ceramic bypass capacitor to GND close to the device is required for stability."       },       {         "number": "5",         "name": "ENABLE",         "type": "input",-        "description": "Enable input; logic high (VIH \u2265 1.3 V) turns the regulator on and logic low (VIL \u2264 0.4 V) forces standby mode with less than 1-\u00b5A supply current; allowed voltage range is -0.3 V to VI + 0.3 V."+        "description": "Enable input; logic high (VIH ≥ 1.3 V) turns the regulator on and logic low (VIL ≤ 0.4 V) forces standby mode with less than 1-µA supply current; allowed voltage range is -0.3 V to VI + 0.3 V."       },       {         "number": "6",@@ -120,6 +120,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps72501dcqr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps72501dcqr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          8.475,+          6.7,+          1.6+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "33432829d339f4daf6b18f110e770b76b78a1b875fe7677cfa772c7630b37634",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}