← Commit history

tps72012qdrvrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·5f8c884b91 · ·parent 1631d18
2 files changed +88−8
package.json+46−6
@@ -68,7 +68,7 @@         "number": "1",         "name": "OUT",         "type": "output",-        "description": "Output pin; 2.2 \u03bcF ceramic capacitor must be connected from this pin to ground for stability and load transient response."+        "description": "Output pin; 2.2 μF ceramic capacitor must be connected from this pin to ground for stability and load transient response."       },       {         "number": "2",@@ -80,13 +80,13 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable pin; logic high signal (\u22651.1 V) turns device on and regulates voltage from IN to OUT, logic low (\u22640.4 V) turns device off."+        "description": "Enable pin; logic high signal (≥1.1 V) turns device on and regulates voltage from IN to OUT, logic low (≤0.4 V) turns device off."       },       {         "number": "4",         "name": "BIAS",         "type": "power_in",-        "description": "Bias supply pin ranging 2.6 V to 5.5 V; TI recommends bypassing with 0.1 \u03bcF ceramic capacitor to ground for transient performance."+        "description": "Bias supply pin ranging 2.6 V to 5.5 V; TI recommends bypassing with 0.1 μF ceramic capacitor to ground for transient performance."       },       {         "number": "5",@@ -98,7 +98,7 @@         "number": "6",         "name": "IN",         "type": "power_in",-        "description": "Input pin with maximum voltage 4.5 V; VIN must not exceed VBIAS; requires 1 \u03bcF bypass capacitor to ground."+        "description": "Input pin with maximum voltage 4.5 V; VIN must not exceed VBIAS; requires 1 μF bypass capacitor to ground."       },       {         "number": "7",@@ -143,6 +143,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps72012qdrvrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.0,+          1.98,+          0.82+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps72012qdrvrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.0,+          1.98,+          0.82+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07a3c96d05f8e63ba63c557e6befd47d6ebf86ebf435194cae16707c75707743",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -128,7 +128,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps72012qdrvrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.0,+          1.98,+          0.82+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps72012qdrvrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.0,+          1.98,+          0.82+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07a3c96d05f8e63ba63c557e6befd47d6ebf86ebf435194cae16707c75707743",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -175,4 +215,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}