component
TPS71715DCKR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# TPS71715DCKR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5++TPS71715DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input to the device; a 0.1-µF to 1-µF capacitor is recommended for better performance, and the input voltage range is 2.5 V to 6.5 V. |+| 2 | GND | power_in | Ground pin; ground return connections for the input and output capacitors should be placed as close to this pin as possible. |+| 3 | EN | input | Driving EN above VEN(high) turns on the regulator, and driving it below VEN(low) puts the regulator into standby mode, disabling the output; the enable pin must not be left floating and its voltage must stay between 0 V and VIN. |+| 4 | NR | passive | Noise reduction pin for fixed-voltage versions only; the noise reduction capacitor filters noise generated by the internal band gap to lower output noise. |+| 5 | OUT | power_out | Regulated output voltage; a minimum of 1 µF of capacitance from this pin to ground is required for stability. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SC-70-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `TPS71715DCKR`+- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`+- 3D model: SC-70-5 (KiCad packages3D, STEP)+- 3D model files: `tps71715dckr-etched.step` / `tps71715dckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps71715dckr.step` / `tps71715dckr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps717) (45 pp, sha256 `9d6a9da698418596`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps71715dckr-datasheet.pdf)
page.jsonadded+182@@ -0,0 +1,182 @@+{+ "slug": "tps71715dckr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps71715dckr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps71715dckr.kicad_sym",+ "tps71715dckr.kicad_mod",+ "tps71715dckr.glb",+ "tps71715dckr.step",+ "tps71715dckr.lbr",+ "docs/hero.png",+ "docs/tps71715dckr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps71715dckr-hero.glb",+ "tps71715dckr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS71715DCKR",+ "manufacturer": "Texas Instruments",+ "package": "SC-70-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps717",+ "parts": {+ "symbol": "tps71715dckr.kicad_sym",+ "footprint": "tps71715dckr.kicad_mod",+ "model_3d": "tps71715dckr-hero.glb",+ "model_3d_plain": "tps71715dckr.glb",+ "model_3d_step": "tps71715dckr-etched.step",+ "model_3d_step_plain": "tps71715dckr.step",+ "lbr": "tps71715dckr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2871247",+ "digikey": "296-21504-2-ND",+ "mouser": "595-TPS71715DCKR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:41:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-21504-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS71715DCKR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input to the device; a 0.1-µF to 1-µF capacitor is recommended for better performance, and the input voltage range is 2.5 V to 6.5 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; ground return connections for the input and output capacitors should be placed as close to this pin as possible."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Driving EN above VEN(high) turns on the regulator, and driving it below VEN(low) puts the regulator into standby mode, disabling the output; the enable pin must not be left floating and its voltage must stay between 0 V and VIN."+ },+ {+ "number": "4",+ "name": "NR",+ "type": "passive",+ "description": "Noise reduction pin for fixed-voltage versions only; the noise reduction capacitor filters noise generated by the internal band gap to lower output noise."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage; a minimum of 1 µF of capacitance from this pin to ground is required for stability."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DCK (SC70-5) variant is the only package of TPS71715DCKR that applies; the 5-pin pinout above is; Pin 4 is shared in the datasheet as NR/FB. TPS71715 is a fixed-voltage part (the '15' part code deno; The datasheet lists IN and OUT with I/O codes 'I' and 'O'; they are mapped here to power_in and powe"+ ],+ "pages_sent": 15,+ "cost_usd": 0.1051,+ "at": "2026-10-08T19:40:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps717",+ "pages": 45,+ "sha256": "9d6a9da698418596",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps71715dckr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps71715dckr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a898b03e0d86e6914e8a8d242c0919cc23a6d1a458a00b8b847f40debbdfab45",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}