← Commit history

tps651851rslr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·a8589d597b · ·parent ad96315
2 files changed +99−19
package.json+57−17
@@ -68,7 +68,7 @@         "number": "1",         "name": "VREF",         "type": "power_in",-        "description": "Filter pin for 2.25-V internal reference voltage to ADC; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Filter pin for 2.25-V internal reference voltage to ADC; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "2",@@ -80,13 +80,13 @@         "number": "3",         "name": "VNEG",         "type": "power_out",-        "description": "Negative supply output pin for panel source drivers at -15V nominal; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Negative supply output pin for panel source drivers at -15V nominal; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "4",         "name": "VNEG_IN",         "type": "power_in",-        "description": "Input pin for LDO2 (VNEG) from DCDC2 output in range 15.2-16.8V; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Input pin for LDO2 (VNEG) from DCDC2 output in range 15.2-16.8V; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "5",@@ -104,7 +104,7 @@         "number": "7",         "name": "INT_LDO",         "type": "output",-        "description": "Filter pin for 2.7-V internal supply; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Filter pin for 2.7-V internal supply; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "8",@@ -122,7 +122,7 @@         "number": "10",         "name": "VIN",         "type": "power_in",-        "description": "Input power supply to general circuitry in range 3-6V; connect a 10-\u00b5F capacitor from this pin to ground."+        "description": "Input power supply to general circuitry in range 3-6V; connect a 10-µF capacitor from this pin to ground."       },       {         "number": "11",@@ -152,13 +152,13 @@         "number": "15",         "name": "VCOM",         "type": "output",-        "description": "Filter pin for panel common-voltage driver output in range 0V to -5.11V with 10mV resolution; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Filter pin for panel common-voltage driver output in range 0V to -5.11V with 10mV resolution; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "16",         "name": "VCOM_PWR",         "type": "power_in",-        "description": "Internal supply input pin to VCOM buffer; connect to DCDC2 output and add 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Internal supply input pin to VCOM buffer; connect to DCDC2 output and add 4.7-µF capacitor from this pin to ground."       },       {         "number": "17",@@ -206,7 +206,7 @@         "number": "24",         "name": "VIN_P",         "type": "power_in",-        "description": "Input power supply to inverting buck-boost converter (DCDC2) in range 3-6V; connect a 10-\u00b5F capacitor from this pin to ground."+        "description": "Input power supply to inverting buck-boost converter (DCDC2) in range 3-6V; connect a 10-µF capacitor from this pin to ground."       },       {         "number": "25",@@ -218,7 +218,7 @@         "number": "26",         "name": "VN",         "type": "power_in",-        "description": "Feedback pin for inverting buck-boost converter (DCDC2) at -16V output and supply for VNEG LDO and VEE charge pump; connect 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Feedback pin for inverting buck-boost converter (DCDC2) at -16V output and supply for VNEG LDO and VEE charge pump; connect 4.7-µF capacitor from this pin to ground."       },       {         "number": "27",@@ -314,19 +314,19 @@         "number": "42",         "name": "VB",         "type": "power_in",-        "description": "Feedback pin for boost converter (DCDC1) at +16V output and supply for VPOS LDO and VDDH charge pump; connect 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Feedback pin for boost converter (DCDC1) at +16V output and supply for VPOS LDO and VDDH charge pump; connect 4.7-µF capacitor from this pin to ground."       },       {         "number": "43",         "name": "VPOS_IN",         "type": "power_in",-        "description": "Input pin for LDO1 (VPOS) from DCDC1 output in range 15.2-16.8V; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Input pin for LDO1 (VPOS) from DCDC1 output in range 15.2-16.8V; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "44",         "name": "VPOS",         "type": "power_out",-        "description": "Positive supply output pin for panel source drivers at +15V nominal; connect a 4.7-\u00b5F capacitor from this pin to ground."+        "description": "Positive supply output pin for panel source drivers at +15V nominal; connect a 4.7-µF capacitor from this pin to ground."       },       {         "number": "45",@@ -338,19 +338,19 @@         "number": "46",         "name": "V3P3",         "type": "power_out",-        "description": "Output pin of integrated 3.3-V power switch; provides gated 3.3V supply to E-Ink display panel with 10\u03a9 on-resistance."+        "description": "Output pin of integrated 3.3-V power switch; provides gated 3.3V supply to E-Ink display panel with 10Ω on-resistance."       },       {         "number": "47",         "name": "TS",         "type": "input",-        "description": "Thermistor input pin for panel temperature monitoring; connect 10-k\u03a9 NTC thermistor and 43-k\u03a9 linearization resistor between this pin and AGND2."+        "description": "Thermistor input pin for panel temperature monitoring; connect 10-kΩ NTC thermistor and 43-kΩ linearization resistor between this pin and AGND2."       },       {         "number": "48",         "name": "AGND2",         "type": "power_in",-        "description": "Reference ground point for external thermistor and linearization resistor; measures panel temperature from -10\u00b0C to 85\u00b0C."+        "description": "Reference ground point for external thermistor and linearization resistor; measures panel temperature from -10°C to 85°C."       },       {         "number": "49",@@ -393,6 +393,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps651851rslr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.02,+          6.02,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2180b96d7947370b904e55640ab102eea7a16b3e69336c1ea0086ed11d1bda91",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps651851rslr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.02,+          6.02,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "aeab8df07090f4f9a50738e37ae791d6a963f6953f5c30d48352413e5ace1895",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -378,7 +378,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps651851rslr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.02,+          6.02,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2180b96d7947370b904e55640ab102eea7a16b3e69336c1ea0086ed11d1bda91",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps651851rslr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.02,+          6.02,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "aeab8df07090f4f9a50738e37ae791d6a963f6953f5c30d48352413e5ace1895",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -425,4 +465,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}