TPS65131RGER

@@ -1,13 +1,222 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tps65131rger",+  "title": "TPS65131RGER",+  "brief": "Texas Instruments DC-DC Converters, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments DC-DC Converters, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "tps65131rger"   ],+  "component": {+    "mpn": "TPS65131RGER",+    "manufacturer": "Texas Instruments",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 24,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps65131rger.pdf",+    "parts": {+      "symbol": "tps65131rger.kicad_sym",+      "footprint": "tps65131rger.kicad_mod",+      "model_3d": "tps65131rger.glb",+      "model_3d_step": "tps65131rger.step",+      "lbr": "tps65131rger.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "INP",+        "type": "input",+        "description": "Boost converter switch input. Connect to the boost inductor node; a second pin (24) is bonded to the same net. Absolute maximum 17 V."+      },+      {+        "number": "2",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground pin for the switching stages. Tie together with pin 3 and the PowerPAD to the board ground plane."+      },+      {+        "number": "3",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground pin for the switching stages. Tie together with pin 2 and the PowerPAD to the board ground plane."+      },+      {+        "number": "4",+        "name": "VIN",+        "type": "power_in",+        "description": "Control supply input. 2.7 V to 5.5 V operating range; UVLO threshold ~2.35 V. Provides bias to the internal control circuitry."+      },+      {+        "number": "5",+        "name": "INN",+        "type": "input",+        "description": "Inverting converter switch input. Connect to the inverter inductor node; a second pin (6) is bonded to the same net."+      },+      {+        "number": "6",+        "name": "INN",+        "type": "input",+        "description": "Inverting converter switch input. Connect to the inverter inductor node; a second pin (5) is bonded to the same net."+      },+      {+        "number": "7",+        "name": "BSW",+        "type": "output",+        "description": "Gate control pin for an external battery-disconnect PFET. Pulls low when ENP is set high to turn on the external PFET; output resistance ~27 k\u03a9."+      },+      {+        "number": "8",+        "name": "ENP",+        "type": "input",+        "description": "Enable pin for the positive (boost) output. 0 V = disabled, VIN = enabled. VIH \u2265 1.4 V, VIL \u2264 0.4 V. Used for power-up/down sequencing."+      },+      {+        "number": "9",+        "name": "PSP",+        "type": "input",+        "description": "Power-save mode enable for the boost converter stage. 0 V = disabled (forced PWM), VIN = enabled (pulse-skipping at light loads)."+      },+      {+        "number": "10",+        "name": "ENN",+        "type": "input",+        "description": "Enable pin for the negative (inverter) output. 0 V = disabled, VIN = enabled. VIH \u2265 1.4 V, VIL \u2264 0.4 V. Used for power-up/down sequencing."+      },+      {+        "number": "11",+        "name": "PSN",+        "type": "input",+        "description": "Power-save mode enable for the inverter stage. 0 V = disabled (forced PWM), VIN = enabled (pulse-skipping at light loads)."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground."+      },+      {+        "number": "13",+        "name": "OUTN",+        "type": "output",+        "description": "Inverting converter switch output. Connect to the flying capacitor / rectifying diode of the inverter stage; a second pin (14) is bonded to the same net."+      },+      {+        "number": "14",+        "name": "OUTN",+        "type": "output",+        "description": "Inverting converter switch output. Connect to the flying capacitor / rectifying diode of the inverter stage; a second pin (13) is bonded to the same net."+      },+      {+        "number": "15",+        "name": "VNEG",+        "type": "input",+        "description": "Negative output voltage sense input. Ties to the regulated negative output rail (adjustable down to -15 V) for internal reference of the inverter output."+      },+      {+        "number": "16",+        "name": "FBN",+        "type": "input",+        "description": "Feedback pin for the negative output voltage divider. Regulated to 0 V (\u00b124 mV) with respect to VREF at the divider tap."+      },+      {+        "number": "17",+        "name": "VREF",+        "type": "output",+        "description": "Reference output voltage, typ. 1.213 V. Bypass with a 220-nF capacitor to ground. Connect the lower resistor of the negative output voltage divider to this pin."+      },+      {+        "number": "18",+        "name": "CN",+        "type": "passive",+        "description": "Compensation pin for the inverting converter control loop. Connect the loop-compensation R-C network from this pin to GND/AGND."+      },+      {+        "number": "19",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground pin. Reference for the internal control circuitry; tie to the ground plane close to the PowerPAD."+      },+      {+        "number": "20",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground."+      },+      {+        "number": "21",+        "name": "CP",+        "type": "passive",+        "description": "Compensation pin for the boost converter control loop. Connect the loop-compensation R-C network from this pin to GND/AGND."+      },+      {+        "number": "22",+        "name": "FBP",+        "type": "input",+        "description": "Feedback pin for the positive output voltage divider. Regulated to 1.213 V (typ.)."+      },+      {+        "number": "23",+        "name": "VPOS",+        "type": "input",+        "description": "Positive output voltage sense input. Ties to the regulated positive output rail (adjustable VIN+0.5 V up to 15 V)."+      },+      {+        "number": "24",+        "name": "INP",+        "type": "input",+        "description": "Boost converter switch input. Connect to the boost inductor node; a second pin (1) is bonded to the same net. Absolute maximum 17 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps65131rger.pdf",+        "pages": 32,+        "sha256": "2d70b7f1a656b110",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "QFN-24-EP(4x4)",+      "Category": "PMIC",+      "Pins": "24"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "tps65131rger"+  ],+  "discovery_pitch": "TPS65131RGER (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +234,5 @@     "docs/tps65131rger-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file