component
TPS65000TRTERQ1
Public Made by Adomby adom
Texas Instruments Power Management - Specialized, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS65000TRTERQ1++**Texas Instruments** · Power Management - Specialized · WQFN-16-EP(3x3)++TPS65000TRTERQ1 from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN_LDO1 | input | Enable input for LDO1. |+| 2 | EN_LDO2 | input | Enable input for LDO2. |+| 3 | PG | output | Open-drain active-low power-good output. |+| 4 | PGND | power_in | Power ground, connected to the thermal pad; the datasheet says to star AGND back to PGND as close to the IC as possible. |+| 5 | SW | output | Switch pin; connect the inductor here. |+| 6 | VINDCDC | power_in | Input voltage to the DC-DC converter and all other control blocks. |+| 7 | MODE | input | Selects forced-PWM or PWM-to-PFM automatic-transition mode. |+| 8 | EN_DCDC | input | Enable input for the DC-DC converter. |+| 9 | FB_DCDC | input | Voltage feedback input to the DC-DC error amplifier. |+| 10 | AGND | power_in | Analog ground; star back to PGND as close to the IC as possible. |+| 11 | FB_LDO1 | input | Voltage feedback input to the LDO1 error amplifier. |+| 12 | VLDO1 | power_out | LDO1 output voltage. |+| 13 | VINLDO1 | power_in | Input voltage to LDO1. |+| 14 | FB_LDO2 | input | Voltage feedback input to the LDO2 error amplifier. |+| 15 | VLDO2 | power_out | LDO2 output voltage. |+| 16 | VINLDO2 | power_in | Input voltage to LDO2. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS65000TRTERQ1`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps65000trterq1-etched.step` / `tps65000trterq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps65000trterq1.step` / `tps65000trterq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps65000-q1) (30 pp, sha256 `df14bebab40e3feb`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps65000trterq1-datasheet.pdf)
page.jsonadded+256@@ -0,0 +1,256 @@+{+ "slug": "tps65000trterq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Management - Specialized, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps65000trterq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps65000trterq1.kicad_sym",+ "tps65000trterq1.kicad_mod",+ "tps65000trterq1.glb",+ "tps65000trterq1.step",+ "tps65000trterq1.lbr",+ "docs/hero.png",+ "docs/tps65000trterq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps65000trterq1-hero.glb",+ "tps65000trterq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS65000TRTERQ1",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Management - Specialized",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps65000-q1",+ "parts": {+ "symbol": "tps65000trterq1.kicad_sym",+ "footprint": "tps65000trterq1.kicad_mod",+ "model_3d": "tps65000trterq1-hero.glb",+ "model_3d_plain": "tps65000trterq1.glb",+ "model_3d_step": "tps65000trterq1-etched.step",+ "model_3d_step_plain": "tps65000trterq1.step",+ "lbr": "tps65000trterq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C702292",+ "digikey": "296-40862-2-ND",+ "mouser": "595-TPS65000TRTERQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T04:16:25Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-40862-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS65000TRTERQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN_LDO1",+ "type": "input",+ "description": "Enable input for LDO1."+ },+ {+ "number": "2",+ "name": "EN_LDO2",+ "type": "input",+ "description": "Enable input for LDO2."+ },+ {+ "number": "3",+ "name": "PG",+ "type": "output",+ "description": "Open-drain active-low power-good output."+ },+ {+ "number": "4",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground, connected to the thermal pad; the datasheet says to star AGND back to PGND as close to the IC as possible."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Switch pin; connect the inductor here."+ },+ {+ "number": "6",+ "name": "VINDCDC",+ "type": "power_in",+ "description": "Input voltage to the DC-DC converter and all other control blocks."+ },+ {+ "number": "7",+ "name": "MODE",+ "type": "input",+ "description": "Selects forced-PWM or PWM-to-PFM automatic-transition mode."+ },+ {+ "number": "8",+ "name": "EN_DCDC",+ "type": "input",+ "description": "Enable input for the DC-DC converter."+ },+ {+ "number": "9",+ "name": "FB_DCDC",+ "type": "input",+ "description": "Voltage feedback input to the DC-DC error amplifier."+ },+ {+ "number": "10",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground; star back to PGND as close to the IC as possible."+ },+ {+ "number": "11",+ "name": "FB_LDO1",+ "type": "input",+ "description": "Voltage feedback input to the LDO1 error amplifier."+ },+ {+ "number": "12",+ "name": "VLDO1",+ "type": "power_out",+ "description": "LDO1 output voltage."+ },+ {+ "number": "13",+ "name": "VINLDO1",+ "type": "power_in",+ "description": "Input voltage to LDO1."+ },+ {+ "number": "14",+ "name": "FB_LDO2",+ "type": "input",+ "description": "Voltage feedback input to the LDO2 error amplifier."+ },+ {+ "number": "15",+ "name": "VLDO2",+ "type": "power_out",+ "description": "LDO2 output voltage."+ },+ {+ "number": "16",+ "name": "VINLDO2",+ "type": "power_in",+ "description": "Input voltage to LDO2."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin table on page 3 lists the EP as an exposed thermal pad with no type; typed as passive. The datas; Datasheet lists VIN pins (VINDCDC, VINLDO1, VINLDO2) as type I and SW/PG/VLDO as O; mapped to KiCad ; Pin descriptions are taken from the page 3 Pin Functions table and kept as printed; electrical limit",+ "exposed pad 17 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0564,+ "at": "2026-10-08T04:16:09"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps65000-q1",+ "pages": 30,+ "sha256": "df14bebab40e3feb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps65000trterq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps65000trterq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "72a6196ca88062cef1f437eac1308c12f922158c8894a57cca1a12e27719f640",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}