TPS63060

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tps63060",+  "title": "TPS63060",+  "brief": "TI buck-boost converter, WSON-10. 2.5-12 V in, regulated output above or below input, 2 A switches. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "TI buck-boost converter, WSON-10. 2.5-12 V in, regulated output above or below input, 2 A switches. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "power",@@ -12,6 +15,140 @@     "wson-10",     "texas-instruments"   ],+  "component": {+    "mpn": "TPS63060",+    "manufacturer": "Texas Instruments",+    "package": "WSON-10",+    "pin_count": 11,+    "category": "Power Management",+    "subcategory": "Buck-boost converter",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps63060.pdf",+    "parts": {+      "symbol": "tps63060.kicad_sym",+      "footprint": "tps63060.kicad_mod",+      "model_3d": "tps63060.glb",+      "model_3d_step": "tps63060.step",+      "lbr": "tps63060.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "L1",+        "type": "passive",+        "description": "Connection for the external power inductor between the VIN-side switch node and the buck-boost inductor. Absolute max -0.3 V to 17 V (AC transients -5 V to 18 V for <10 ns)."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply voltage for the power stage. Recommended operating range 2.5 V to 12 V; absolute max 17 V. Bypass with CIN to GND close to the pin."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input. Logic 1 enables the converter, logic 0 disables it and disconnects the load. VIL max 0.4 V, VIH min 1.2 V. Do not leave floating."+      },+      {+        "number": "4",+        "name": "PS/SYNC",+        "type": "input",+        "description": "Power-save mode select and synchronization input. Logic 1 disables power-save (forced fixed-frequency PWM), logic 0 enables power-save mode; can also accept a 2.2-2.6 MHz clock for synchronization."+      },+      {+        "number": "5",+        "name": "PG",+        "type": "output",+        "description": "Power-good open-drain output. High (via external pull-up) when VOUT is in regulation; low on failure. VOL 0.04 V typ at 10 uA, leakage 0.01 uA typ."+      },+      {+        "number": "6",+        "name": "VAUX",+        "type": "power_out",+        "description": "Internal auxiliary bias rail output; connect a bypass capacitor (CAUX) to GND. Tracks the higher of VIN or VOUT, clamped at 7 V; max load 1 mA."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Control and logic ground reference for the analog control circuitry."+      },+      {+        "number": "8",+        "name": "FB",+        "type": "input",+        "description": "Feedback input. On the adjustable TPS63060, connect the external resistor divider from VOUT to set output voltage (VFB = 500 mV typ, 2.5-8 V range). On the fixed TPS63061 this pin must be tied to VOUT."+      },+      {+        "number": "9",+        "name": "VOUT",+        "type": "power_out",+        "description": "Buck-boost converter output. Regulated 2.5 V to 8 V (adjustable) or 5 V (TPS63061); up to 2 A in buck mode (VIN<10 V) or 1.3 A in boost mode (VIN>4 V). Bypass with COUT."+      },+      {+        "number": "10",+        "name": "L2",+        "type": "passive",+        "description": "Connection for the external power inductor between the VOUT-side switch node and the buck-boost inductor. Absolute max -0.3 V to 17 V (AC transients -5 V to 18 V for <10 ns)."+      },+      {+        "number": "11",+        "name": "PGND",+        "type": "power_in",+        "description": "Exposed thermal pad on the package underside. Must be soldered to the PCB for adequate power dissipation and must be connected to PGND (power ground plane)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps63060.pdf",+        "pages": 31,+        "sha256": "d2818015ba4b0d7c",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Buck-boost (step up/down) converter",+      "Input": "2.5-12 V",+      "Output": "Adjustable (above or below input)",+      "Switch current": "2 A",+      "Switching freq": "Up to 2.4 MHz",+      "Light load": "Power-save mode (PS/SYNC)",+      "Package": "WSON-10"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "tps63060",+    "buck boost converter",+    "step up down regulator",+    "single cell to 5v"+  ],+  "discovery_pitch": "TI TPS63060 buck-boost converter (WSON-10) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -29,10 +166,5 @@     "docs/tps63060-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file