component
TPS62A02DRLR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOT-563. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -38,7 +38,7 @@ "number": "2", "name": "SW", "type": "output",- "description": "Switch node connected to the internal high-side and low-side FETs and the inductor terminal. Connect the output filter inductor (typ. 1.0 \u00b5H) between SW and VOUT. Absolute max -0.3 V to VIN+0.3 V DC; -3 V to 10 V transient <10 ns."+ "description": "Switch node connected to the internal high-side and low-side FETs and the inductor terminal. Connect the output filter inductor (typ. 1.0 µH) between SW and VOUT. Absolute max -0.3 V to VIN+0.3 V DC; -3 V to 10 V transient <10 ns." }, { "number": "3",@@ -50,13 +50,13 @@ "number": "4", "name": "EN", "type": "input",- "description": "Device enable logic input. Logic high (>1.2 V rising) enables the converter; logic low (<0.4 V falling) forces shutdown (\u22642 \u00b5A IQ). Do not leave floating. Absolute max 6.5 V."+ "description": "Device enable logic input. Logic high (>1.2 V rising) enables the converter; logic low (<0.4 V falling) forces shutdown (≤2 µA IQ). Do not leave floating. Absolute max 6.5 V." }, { "number": "5", "name": "FB", "type": "input",- "description": "Feedback pin for the internal control loop. Connect this pin to the center tap of an external resistor divider from VOUT to set the output voltage. Internal reference VFB = 600 mV (\u00b11% at 0-125\u00b0C)."+ "description": "Feedback pin for the internal control loop. Connect this pin to the center tap of an external resistor divider from VOUT to set the output voltage. Internal reference VFB = 600 mV (±1% at 0-125°C)." }, { "number": "6",@@ -156,5 +156,8 @@ "docs/tps62a02drlr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }