TPS62090RGTR

@@ -1,13 +1,190 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tps62090rgtr",+  "title": "TPS62090RGTR",+  "brief": "Texas Instruments Charge Pumps, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Charge Pumps, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "power management (pmic)",     "tps62090rgtr"   ],+  "component": {+    "mpn": "TPS62090RGTR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "Charge Pumps",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps62090.pdf",+    "parts": {+      "symbol": "tps62090rgtr.kicad_sym",+      "footprint": "tps62090rgtr.kicad_mod",+      "model_3d": "tps62090rgtr.glb",+      "model_3d_step": "tps62090rgtr.step",+      "lbr": "tps62090rgtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch pin of the power stage. Connect to the external inductor. Absolute maximum voltage range -0.3 V to VIN + 0.3 V. Pins 1 and 2 are tied together internally to the switching node."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switch pin of the power stage. Connect to the external inductor. Absolute maximum voltage range -0.3 V to VIN + 0.3 V. Pins 1 and 2 are tied together internally to the switching node."+      },+      {+        "number": "3",+        "name": "FREQ",+        "type": "input",+        "description": "Switching frequency select. FREQ = Low sets typical switching frequency to 2.8 MHz; FREQ = High sets it to 1.4 MHz. Has an internal ~400 kOhm pull-down resistor and can be left floating for 2.8 MHz operation."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "output",+        "description": "Power good open-drain output. High impedance when output voltage is within regulation, pulled low when output is below nominal. Pull-up resistor must not be tied to a voltage higher than VIN. Sink current up to 1 mA."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin. For adjustable version, connect a resistor divider from output to set VOUT (VFB = 0.8 V typ). For fixed-output versions may be tied to GND for improved thermal performance; has ~400 kOhm pull-down active when EN is low."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference for the control circuitry. Must be connected to the exposed thermal pad and to PGND on the PCB."+      },+      {+        "number": "7",+        "name": "CP",+        "type": "passive",+        "description": "Internal charge-pump flying capacitor terminal. Connect a 10 nF capacitor between CP and CN. Absolute max -0.3 V to VIN + 7.0 V."+      },+      {+        "number": "8",+        "name": "CN",+        "type": "passive",+        "description": "Internal charge-pump flying capacitor terminal. Connect a 10 nF capacitor between CP and CN. Absolute max -0.3 V to VIN + 7.0 V."+      },+      {+        "number": "9",+        "name": "SS",+        "type": "input",+        "description": "Softstart control pin. A capacitor to GND sets the softstart time using the ~7.5 uA softstart current. Leaving it floating uses the minimum start-up time. Also used for output voltage tracking."+      },+      {+        "number": "10",+        "name": "AVIN",+        "type": "power_in",+        "description": "Bias supply input voltage pin for the internal analog circuitry. Recommended input range 2.5 V to 6 V; absolute max 7 V. Typically tied to PVIN with local decoupling."+      },+      {+        "number": "11",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power supply input voltage pin for the power stage. Recommended input range 2.5 V to 6 V; absolute max 7 V. Pins 11 and 12 must be tied together and bypassed with a low-ESR ceramic capacitor (typ. 10 uF)."+      },+      {+        "number": "12",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power supply input voltage pin for the power stage. Recommended input range 2.5 V to 6 V; absolute max 7 V. Pins 11 and 12 must be tied together and bypassed with a low-ESR ceramic capacitor (typ. 10 uF)."+      },+      {+        "number": "13",+        "name": "EN",+        "type": "input",+        "description": "Device enable. Pull high to enable; pull low to disable. Has an internal ~400 kOhm pull-down resistor active when EN is low. VIH >= 1 V, VIL <= 0.4 V."+      },+      {+        "number": "14",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return for the power stage. Pins 14 and 15 must be tied together and connected to the exposed thermal pad and system ground plane."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return for the power stage. Pins 14 and 15 must be tied together and connected to the exposed thermal pad and system ground plane."+      },+      {+        "number": "16",+        "name": "VOS",+        "type": "input",+        "description": "Output voltage sense pin. Must be connected directly to the regulated output voltage node (VOUT) at the load side of the output capacitor."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "power_in",+        "description": "Exposed thermal pad, internally connected to AGND. Must be soldered to the PCB ground plane for electrical connection and thermal reliability."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps62090.pdf",+        "pages": 32,+        "sha256": "1aca00440b3d4033",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "VQFN-16-EP(3x3)",+      "Category": "Power Management (PMIC)",+      "Pins": "17"+    }+  },+  "variants": [+    {+      "mpn": "TPS62090RGTR",+      "kind": "packaging"+    },+    {+      "mpn": "TPS62090RGTRRGTT",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "tps62090rgtr"+  ],+  "discovery_pitch": "TPS62090RGTR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +202,5 @@     "docs/tps62090rgtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file