component
TPS62042DGQR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,13 +32,13 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable input. Pulling EN to GND forces the device into shutdown (I_SD \u2248 0.1 \u00b5A). Pulling EN to V_IN enables the converter. V_IH \u2265 1.4 V, V_IL \u2264 0.4 V, I_EN \u2248 0.01 \u00b5A. Must not be left floating."+ "description": "Enable input. Pulling EN to GND forces the device into shutdown (I_SD ≈ 0.1 µA). Pulling EN to V_IN enables the converter. V_IH ≥ 1.4 V, V_IL ≤ 0.4 V, I_EN ≈ 0.01 µA. Must not be left floating." }, { "number": "2", "name": "VIN", "type": "power_in",- "description": "Supply voltage input, 2.5 V to 6.0 V (absolute max 7 V). Tie pins 2 and 3 together and bypass with a 22 \u00b5F ceramic input capacitor close to the pin."+ "description": "Supply voltage input, 2.5 V to 6.0 V (absolute max 7 V). Tie pins 2 and 3 together and bypass with a 22 µF ceramic input capacitor close to the pin." }, { "number": "3",@@ -62,13 +62,13 @@ "number": "6", "name": "MODE", "type": "input",- "description": "Operating-mode select. MODE high forces fixed-frequency PWM operation (lower output ripple / noise). MODE low enables power-save mode: fixed-frequency PWM at heavy load, automatic PFM at light loads for higher efficiency. V_IH \u2265 1.4 V, V_IL \u2264 0.4 V, I_MODE \u2248 0.01 \u00b5A."+ "description": "Operating-mode select. MODE high forces fixed-frequency PWM operation (lower output ripple / noise). MODE low enables power-save mode: fixed-frequency PWM at heavy load, automatic PFM at light loads for higher efficiency. V_IH ≥ 1.4 V, V_IL ≤ 0.4 V, I_MODE ≈ 0.01 µA." }, { "number": "7", "name": "SW", "type": "output",- "description": "Switch node - drain of the internal P-channel and N-channel power MOSFETs. Connect to the external 6.2 \u00b5H inductor. Tie pins 7 and 8 together externally. Current limit \u2248 1.85 A (typ)."+ "description": "Switch node - drain of the internal P-channel and N-channel power MOSFETs. Connect to the external 6.2 µH inductor. Tie pins 7 and 8 together externally. Current limit ≈ 1.85 A (typ)." }, { "number": "8",@@ -92,7 +92,7 @@ "number": "11", "name": "PAD", "type": "power_in",- "description": "Exposed thermal PowerPAD on the underside of the DGQ MSOP-10 package. Must be soldered to the PCB GND plane through thermal vias for the rated \u03b8_JA = 60 \u00b0C/W. Note explicitly states 'The PowerPAD must be connected to GND.'"+ "description": "Exposed thermal PowerPAD on the underside of the DGQ MSOP-10 package. Must be soldered to the PCB GND plane through thermal vias for the rated θ_JA = 60 °C/W. Note explicitly states 'The PowerPAD must be connected to GND.'" } ], "provenance": {@@ -170,5 +170,8 @@ "docs/tps62042dgqr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }