component
TPS61194PWPR
Public Made by Adomby adom
Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tps61194pwpr: factory component page (tier=lcsc)
8 files changed
+11828−11839
diff truncated
README.md+21−21@@ -8,26 +8,26 @@ TPS61194PWPR from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descripti | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Input power pin, operating range 4.5V to 45V |-| 2 | LDO | power_out | Internal LDO output (~4.3V), connect 1μF bypass capacitor to GND |-| 3 | FSET | input | Frequency setting, connect 24kΩ to 219kΩ resistor to GND for 300kHz to 2.2MHz switching frequency |-| 4 | VDDIO/EN | power_in | Enable and digital supply, 0-5.25V logic with VIL=0.4V and VIH=1.65V thresholds |-| 5 | FAULT | tri_state | Open-drain fault output, VOL=0.3-0.5V with 3mA pullup current |-| 6 | SYNC | input | External sync input 300kHz-2.2MHz or tie to GND/VDDIO/EN for spread spectrum control |-| 7 | PWM | input | PWM brightness input, 100Hz to 20kHz with 0.5μs minimum on/off time |-| 8 | NC | unconnected | No connect, leave floating |-| 9 | GND | power_in | Ground, device signal ground reference |-| 10 | ISET | input | LED current setting, connect 24kΩ to 129kΩ resistor to GND for 24mA to 100mA per channel |-| 11 | GND | power_in | Ground, device signal ground reference |-| 12 | OUT4 | output | LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage |-| 13 | OUT3 | output | LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage |-| 14 | OUT2 | output | LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage |-| 15 | OUT1 | output | LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage |-| 16 | FB | input | Feedback input, connect to resistor divider midpoint (5kΩ to 150kΩ) between VOUT and GND |-| 17 | PGND | power_in | Power ground for DC-DC converter, return path for high-current boost/SEPIC paths |-| 18 | SW | output | Switch output, 0-45V peak voltage with 1.8A to 2.2A current limit |-| 19 | NC | unconnected | No connect, leave floating |-| 20 | VIN | power_in | Input power pin, operating range 4.5V to 45V |+| 1 | VIN | power_in | Input power supply pin with 4.5V to 40V operating range. |+| 2 | LDO | power_out | Internal LDO output; connect a 1-μF decoupling capacitor between this pin and noise-free GND. |+| 3 | FSET | passive | Boost or SEPIC switching frequency setting; connect external resistor (24 kΩ to 219 kΩ) between this pin and ground. |+| 4 | VDDIO/EN | power_in | Enable input for the device as well as supply input (VDDIO) for digital pins. |+| 5 | FAULT | output | Fault signal output (open drain); if unused, the pin may be left floating. |+| 6 | SYNC | input | Input for synchronizing boost converter; connect to GND to disable spread spectrum or to VDDIO/EN to enable spread spectrum. |+| 7 | PWM | input | PWM dimming input; supports 10000:1 dimming ratio at 100Hz. |+| 8 | NC | unconnected | No connect. |+| 9 | GND | power_in | Ground reference. |+| 10 | ISET | passive | LED current setting; connect external resistor (24 kΩ to 129 kΩ) between this pin and ground. |+| 11 | GND | power_in | Ground reference. |+| 12 | OUT4 | output | LED current sink output with maximum 100mA per channel; must be connected to GND if not used. |+| 13 | OUT3 | output | LED current sink output with maximum 100mA per channel; must be connected to GND if not used. |+| 14 | OUT2 | output | LED current sink output with maximum 100mA per channel; must be connected to GND if not used. |+| 15 | OUT1 | output | LED current sink output with maximum 100mA per channel; must be connected to GND if not used. |+| 16 | FB | input | Boost or SEPIC feedback input; must be connected to middle of resistor divider between VOUT (up to 45V) and ground using feedback resistor values from 5 kΩ to 150 kΩ. |+| 17 | PGND | power_in | DC-DC (boost or SEPIC) power ground. |+| 18 | SW | output | DC-DC (boost or SEPIC) switch pin; switching node connected to external inductor and diode. |+| 19 | NC | unconnected | No connect. |+| 20 | VIN | power_in | Input power supply pin with 4.5V to 40V operating range. | | 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications@@ -52,7 +52,7 @@ Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61194) (37 pp, sha256 `64ca039f03d043a5`, retrieved 2026-10-01, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/tps61194pwpr-datasheet.pdf)
page.json+35−37@@ -36,12 +36,11 @@ "mouser": "595-TPS61194PWPR" }, "distributor_check": {- "checked_at": "2026-10-01T18:03:07Z",+ "checked_at": "2026-10-01T18:26:55Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-47297-2-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": "595-TPS61194PWPR",@@ -53,121 +52,121 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input power pin, operating range 4.5V to 45V"+ "description": "Input power supply pin with 4.5V to 40V operating range." }, { "number": "2", "name": "LDO", "type": "power_out",- "description": "Internal LDO output (~4.3V), connect 1μF bypass capacitor to GND"+ "description": "Internal LDO output; connect a 1-\u03bcF decoupling capacitor between this pin and noise-free GND." }, { "number": "3", "name": "FSET",- "type": "input",- "description": "Frequency setting, connect 24kΩ to 219kΩ resistor to GND for 300kHz to 2.2MHz switching frequency"+ "type": "passive",+ "description": "Boost or SEPIC switching frequency setting; connect external resistor (24 k\u03a9 to 219 k\u03a9) between this pin and ground." }, { "number": "4", "name": "VDDIO/EN", "type": "power_in",- "description": "Enable and digital supply, 0-5.25V logic with VIL=0.4V and VIH=1.65V thresholds"+ "description": "Enable input for the device as well as supply input (VDDIO) for digital pins." }, { "number": "5", "name": "FAULT",- "type": "tri_state",- "description": "Open-drain fault output, VOL=0.3-0.5V with 3mA pullup current"+ "type": "output",+ "description": "Fault signal output (open drain); if unused, the pin may be left floating." }, { "number": "6", "name": "SYNC", "type": "input",- "description": "External sync input 300kHz-2.2MHz or tie to GND/VDDIO/EN for spread spectrum control"+ "description": "Input for synchronizing boost converter; connect to GND to disable spread spectrum or to VDDIO/EN to enable spread spectrum." }, { "number": "7", "name": "PWM", "type": "input",- "description": "PWM brightness input, 100Hz to 20kHz with 0.5μs minimum on/off time"+ "description": "PWM dimming input; supports 10000:1 dimming ratio at 100Hz." }, { "number": "8", "name": "NC", "type": "unconnected",- "description": "No connect, leave floating"+ "description": "No connect." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Ground, device signal ground reference"+ "description": "Ground reference." }, { "number": "10", "name": "ISET",- "type": "input",- "description": "LED current setting, connect 24kΩ to 129kΩ resistor to GND for 24mA to 100mA per channel"+ "type": "passive",+ "description": "LED current setting; connect external resistor (24 k\u03a9 to 129 k\u03a9) between this pin and ground." }, { "number": "11", "name": "GND", "type": "power_in",- "description": "Ground, device signal ground reference"+ "description": "Ground reference." }, { "number": "12", "name": "OUT4", "type": "output",- "description": "LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage"+ "description": "LED current sink output with maximum 100mA per channel; must be connected to GND if not used." }, { "number": "13", "name": "OUT3", "type": "output",- "description": "LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage"+ "description": "LED current sink output with maximum 100mA per channel; must be connected to GND if not used." }, { "number": "14", "name": "OUT2", "type": "output",- "description": "LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage"+ "description": "LED current sink output with maximum 100mA per channel; must be connected to GND if not used." }, { "number": "15", "name": "OUT1", "type": "output",- "description": "LED current sink output, 0-100mA with ±5% accuracy and 0.4-0.7V saturation voltage"+ "description": "LED current sink output with maximum 100mA per channel; must be connected to GND if not used." }, { "number": "16", "name": "FB", "type": "input",- "description": "Feedback input, connect to resistor divider midpoint (5kΩ to 150kΩ) between VOUT and GND"+ "description": "Boost or SEPIC feedback input; must be connected to middle of resistor divider between VOUT (up to 45V) and ground using feedback resistor values from 5 k\u03a9 to 150 k\u03a9." }, { "number": "17", "name": "PGND", "type": "power_in",- "description": "Power ground for DC-DC converter, return path for high-current boost/SEPIC paths"+ "description": "DC-DC (boost or SEPIC) power ground." }, { "number": "18", "name": "SW", "type": "output",- "description": "Switch output, 0-45V peak voltage with 1.8A to 2.2A current limit"+ "description": "DC-DC (boost or SEPIC) switch pin; switching node connected to external inductor and diode." }, { "number": "19", "name": "NC", "type": "unconnected",- "description": "No connect, leave floating"+ "description": "No connect." }, { "number": "20", "name": "VIN", "type": "power_in",- "description": "Input power pin, operating range 4.5V to 45V"+ "description": "Input power supply pin with 4.5V to 40V operating range." }, { "number": "21",@@ -177,19 +176,21 @@ } ], "provenance": {- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "factory_chain": { "factory": "2.0.0",- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "primary_model": "claude-haiku-4-5-20251001", "primary_mode": "text",- "consensus_model": "claude-sonnet-4-6",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed",- "guard_notes": [],- "pages_sent": 37,- "cost_usd": 0.5708,- "at": "2026-10-01T18:02:44"+ "guard_notes": [+ "extractor flagged: Exposed thermal pad (EP) shown in package diagram but not explicitly numbered in pin functions table"+ ],+ "pages_sent": 7,+ "cost_usd": 0.2105,+ "at": "2026-10-01T18:26:45" }, "datasheet": { "url": "https://www.ti.com/cn/lit/gpn/tps61194",@@ -251,8 +252,5 @@ "docs/tps61194pwpr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }
tps61194pwpr-etched.glb⋯ 1 unchanged line ⋯
tps61194pwpr-etched.step+4384−4384@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-10-01T18:02:53',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-10-01T18:26:49',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.8','Open CASCADE 7.8' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -77,7 +77,7 @@ REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#56) SHAPE_REPRESENTATION_RELATIONSHIP() ); #56 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); #57 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#58);-#58 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7434','=>[0:1:1:1]','',#5,#31,$);+#58 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11287','=>[0:1:1:1]','',#5,#31,$); #59 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33)); #60 = SHAPE_DEFINITION_REPRESENTATION(#61,#67); #61 = PRODUCT_DEFINITION_SHAPE('','',#62);@@ -397,7 +397,7 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #366 = ITEM_DEFINED_TRANSFORMATION('','',#11,#37); #367 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#368 );-#368 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7431','body','',#31,#62,$);+#368 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11284','body','',#31,#62,$); #369 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#64)); #370 = SHAPE_DEFINITION_REPRESENTATION(#371,#377); #371 = PRODUCT_DEFINITION_SHAPE('','',#372);@@ -410,7 +410,7 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #2070,#2352,#2634,#2916,#3198,#3480,#3762,#4044,#4326,#4608,#4890, #5172,#5454,#5736,#6018),#6168); #378 = MANIFOLD_SOLID_BREP('',#379);-#379 = CLOSED_SHELL('',(#380,#420,#451,#482,#531,#555,#579,#614,#631,+#379 = CLOSED_SHELL('',(#380,#420,#483,#514,#538,#562,#586,#610,#627, #648)); #380 = ADVANCED_FACE('',(#381),#415,.F.); #381 = FACE_BOUND('',#382,.F.);@@ -452,248 +452,248 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #417 = CARTESIAN_POINT('',(-2.15,2.925,0.595)); #418 = DIRECTION('',(-0.,-0.,-1.)); #419 = DIRECTION('',(-1.,0.,0.));-#420 = ADVANCED_FACE('',(#421),#446,.F.);+#420 = ADVANCED_FACE('',(#421),#478,.F.); #421 = FACE_BOUND('',#422,.F.);-#422 = EDGE_LOOP('',(#423,#433,#439,#440));-#423 = ORIENTED_EDGE('',*,*,#424,.F.);-#424 = EDGE_CURVE('',#425,#427,#429,.T.);-#425 = VERTEX_POINT('',#426);-#426 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#427 = VERTEX_POINT('',#428);-#428 = CARTESIAN_POINT('',(-2.15,3.075,0.445));-#429 = LINE('',#430,#431);-#430 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#431 = VECTOR('',#432,1.);-#432 = DIRECTION('',(0.,1.,0.));-#433 = ORIENTED_EDGE('',*,*,#434,.T.);-#434 = EDGE_CURVE('',#425,#385,#435,.T.);-#435 = LINE('',#436,#437);-#436 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#437 = VECTOR('',#438,1.);-#438 = DIRECTION('',(0.,0.,1.));-#439 = ORIENTED_EDGE('',*,*,#384,.T.);-#440 = ORIENTED_EDGE('',*,*,#441,.F.);-#441 = EDGE_CURVE('',#427,#387,#442,.T.);-#442 = LINE('',#443,#444);-#443 = CARTESIAN_POINT('',(-2.15,3.075,0.445));-#444 = VECTOR('',#445,1.);-#445 = DIRECTION('',(0.,0.,1.));-#446 = PLANE('',#447);-#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);-#448 = CARTESIAN_POINT('',(-2.15,2.925,0.445));-#449 = DIRECTION('',(-1.,0.,0.));-#450 = DIRECTION('',(0.,0.,1.));-#451 = ADVANCED_FACE('',(#452),#477,.F.);-#452 = FACE_BOUND('',#453,.F.);-#453 = EDGE_LOOP('',(#454,#462,#470,#476));-#454 = ORIENTED_EDGE('',*,*,#455,.T.);-#455 = EDGE_CURVE('',#395,#456,#458,.T.);-#456 = VERTEX_POINT('',#457);-#457 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));-#458 = LINE('',#459,#460);-#459 = CARTESIAN_POINT('',(-2.35,2.775,0.595));-#460 = VECTOR('',#461,1.);-#461 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#462 = ORIENTED_EDGE('',*,*,#463,.F.);-#463 = EDGE_CURVE('',#464,#456,#466,.T.);-#464 = VERTEX_POINT('',#465);-#465 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));-#466 = LINE('',#467,#468);-#467 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));-#468 = VECTOR('',#469,1.);-#469 = DIRECTION('',(0.,-1.,0.));-#470 = ORIENTED_EDGE('',*,*,#471,.F.);-#471 = EDGE_CURVE('',#403,#464,#472,.T.);-#472 = LINE('',#473,#474);-#473 = CARTESIAN_POINT('',(-2.35,3.075,0.595));-#474 = VECTOR('',#475,1.);-#475 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#476 = ORIENTED_EDGE('',*,*,#402,.T.);-#477 = PLANE('',#478);-#478 = AXIS2_PLACEMENT_3D('',#479,#480,#481);-#479 = CARTESIAN_POINT('',(-2.35,2.925,0.595));-#480 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#481 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#482 = ADVANCED_FACE('',(#483),#526,.T.);-#483 = FACE_BOUND('',#484,.T.);-#484 = EDGE_LOOP('',(#485,#486,#487,#495,#503,#511,#519,#525));-#485 = ORIENTED_EDGE('',*,*,#394,.T.);-#486 = ORIENTED_EDGE('',*,*,#455,.T.);-#487 = ORIENTED_EDGE('',*,*,#488,.T.);-#488 = EDGE_CURVE('',#456,#489,#491,.T.);-#489 = VERTEX_POINT('',#490);-#490 = CARTESIAN_POINT('',(-3.205,2.775,0.15));-#491 = LINE('',#492,#493);-#492 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));-#493 = VECTOR('',#494,1.);-#494 = DIRECTION('',(-1.,0.,0.));-#495 = ORIENTED_EDGE('',*,*,#496,.T.);-#496 = EDGE_CURVE('',#489,#497,#499,.T.);-#497 = VERTEX_POINT('',#498);-#498 = CARTESIAN_POINT('',(-3.205,2.775,0.));-#499 = LINE('',#500,#501);-#500 = CARTESIAN_POINT('',(-3.205,2.775,0.15));-#501 = VECTOR('',#502,1.);-#502 = DIRECTION('',(0.,0.,-1.));-#503 = ORIENTED_EDGE('',*,*,#504,.T.);-#504 = EDGE_CURVE('',#497,#505,#507,.T.);-#505 = VERTEX_POINT('',#506);-#506 = CARTESIAN_POINT('',(-2.4875,2.775,0.));-#507 = LINE('',#508,#509);-#508 = CARTESIAN_POINT('',(-3.205,2.775,0.));-#509 = VECTOR('',#510,1.);-#510 = DIRECTION('',(1.,0.,0.));-#511 = ORIENTED_EDGE('',*,*,#512,.T.);-#512 = EDGE_CURVE('',#505,#513,#515,.T.);-#513 = VERTEX_POINT('',#514);-#514 = CARTESIAN_POINT('',(-2.2,2.775,0.445));-#515 = LINE('',#516,#517);-#516 = CARTESIAN_POINT('',(-2.4875,2.775,0.));-#517 = VECTOR('',#518,1.);-#518 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#519 = ORIENTED_EDGE('',*,*,#520,.T.);-#520 = EDGE_CURVE('',#513,#425,#521,.T.);+#422 = EDGE_LOOP('',(#423,#424,#432,#440,#448,#456,#464,#472));+#423 = ORIENTED_EDGE('',*,*,#410,.T.);+#424 = ORIENTED_EDGE('',*,*,#425,.T.);+#425 = EDGE_CURVE('',#403,#426,#428,.T.);+#426 = VERTEX_POINT('',#427);+#427 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#428 = LINE('',#429,#430);+#429 = CARTESIAN_POINT('',(-2.35,3.075,0.595));+#430 = VECTOR('',#431,1.);+#431 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#432 = ORIENTED_EDGE('',*,*,#433,.T.);+#433 = EDGE_CURVE('',#426,#434,#436,.T.);+#434 = VERTEX_POINT('',#435);+#435 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#436 = LINE('',#437,#438);+#437 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#438 = VECTOR('',#439,1.);+#439 = DIRECTION('',(-1.,0.,0.));+#440 = ORIENTED_EDGE('',*,*,#441,.T.);+#441 = EDGE_CURVE('',#434,#442,#444,.T.);+#442 = VERTEX_POINT('',#443);+#443 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#444 = LINE('',#445,#446);+#445 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#446 = VECTOR('',#447,1.);+#447 = DIRECTION('',(0.,0.,-1.));+#448 = ORIENTED_EDGE('',*,*,#449,.T.);+#449 = EDGE_CURVE('',#442,#450,#452,.T.);+#450 = VERTEX_POINT('',#451);+#451 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.,0.));+#456 = ORIENTED_EDGE('',*,*,#457,.T.);+#457 = EDGE_CURVE('',#450,#458,#460,.T.);+#458 = VERTEX_POINT('',#459);+#459 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#464 = ORIENTED_EDGE('',*,*,#465,.T.);+#465 = EDGE_CURVE('',#458,#466,#468,.T.);+#466 = VERTEX_POINT('',#467);+#467 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,0.,0.));+#472 = ORIENTED_EDGE('',*,*,#473,.T.);+#473 = EDGE_CURVE('',#466,#387,#474,.T.);+#474 = LINE('',#475,#476);+#475 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#476 = VECTOR('',#477,1.);+#477 = DIRECTION('',(0.,0.,1.));+#478 = PLANE('',#479);+#479 = AXIS2_PLACEMENT_3D('',#480,#481,#482);+#480 = CARTESIAN_POINT('',(-2.634182274245,3.075,0.217942023204));+#481 = DIRECTION('',(-0.,-1.,-0.));+#482 = DIRECTION('',(0.,0.,-1.));+#483 = ADVANCED_FACE('',(#484),#509,.F.);+#484 = FACE_BOUND('',#485,.F.);+#485 = EDGE_LOOP('',(#486,#494,#502,#508));+#486 = ORIENTED_EDGE('',*,*,#487,.F.);+#487 = EDGE_CURVE('',#488,#458,#490,.T.);+#488 = VERTEX_POINT('',#489);+#489 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(0.,1.,0.));+#494 = ORIENTED_EDGE('',*,*,#495,.T.);+#495 = EDGE_CURVE('',#488,#496,#498,.T.);+#496 = VERTEX_POINT('',#497);+#497 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#498 = LINE('',#499,#500);+#499 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#500 = VECTOR('',#501,1.);+#501 = DIRECTION('',(1.,0.,0.));+#502 = ORIENTED_EDGE('',*,*,#503,.T.);+#503 = EDGE_CURVE('',#496,#466,#504,.T.);+#504 = LINE('',#505,#506);+#505 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#506 = VECTOR('',#507,1.);+#507 = DIRECTION('',(0.,1.,0.));+#508 = ORIENTED_EDGE('',*,*,#465,.F.);+#509 = PLANE('',#510);+#510 = AXIS2_PLACEMENT_3D('',#511,#512,#513);+#511 = CARTESIAN_POINT('',(-2.2,2.925,0.445));+#512 = DIRECTION('',(-0.,0.,1.));+#513 = DIRECTION('',(1.,0.,0.));+#514 = ADVANCED_FACE('',(#515),#533,.F.);+#515 = FACE_BOUND('',#516,.F.);+#516 = EDGE_LOOP('',(#517,#525,#526,#527));+#517 = ORIENTED_EDGE('',*,*,#518,.T.);+#518 = EDGE_CURVE('',#519,#488,#521,.T.);+#519 = VERTEX_POINT('',#520);+#520 = CARTESIAN_POINT('',(-2.4875,2.775,0.)); #521 = LINE('',#522,#523);-#522 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#522 = CARTESIAN_POINT('',(-2.4875,2.775,0.)); #523 = VECTOR('',#524,1.);-#524 = DIRECTION('',(1.,0.,0.));-#525 = ORIENTED_EDGE('',*,*,#434,.T.);-#526 = PLANE('',#527);-#527 = AXIS2_PLACEMENT_3D('',#528,#529,#530);-#528 = CARTESIAN_POINT('',(-2.634182274245,2.775,0.217942023204));-#529 = DIRECTION('',(-0.,-1.,-0.));-#530 = DIRECTION('',(0.,0.,-1.));-#531 = ADVANCED_FACE('',(#532),#550,.F.);-#532 = FACE_BOUND('',#533,.F.);-#533 = EDGE_LOOP('',(#534,#542,#543,#544));-#534 = ORIENTED_EDGE('',*,*,#535,.F.);-#535 = EDGE_CURVE('',#513,#536,#538,.T.);-#536 = VERTEX_POINT('',#537);-#537 = CARTESIAN_POINT('',(-2.2,3.075,0.445));-#538 = LINE('',#539,#540);-#539 = CARTESIAN_POINT('',(-2.2,2.775,0.445));-#540 = VECTOR('',#541,1.);-#541 = DIRECTION('',(0.,1.,0.));-#542 = ORIENTED_EDGE('',*,*,#520,.T.);-#543 = ORIENTED_EDGE('',*,*,#424,.T.);-#544 = ORIENTED_EDGE('',*,*,#545,.F.);-#545 = EDGE_CURVE('',#536,#427,#546,.T.);-#546 = LINE('',#547,#548);-#547 = CARTESIAN_POINT('',(-2.2,3.075,0.445));-#548 = VECTOR('',#549,1.);-#549 = DIRECTION('',(1.,0.,0.));-#550 = PLANE('',#551);-#551 = AXIS2_PLACEMENT_3D('',#552,#553,#554);-#552 = CARTESIAN_POINT('',(-2.2,2.925,0.445));-#553 = DIRECTION('',(-0.,0.,1.));-#554 = DIRECTION('',(1.,0.,0.));-#555 = ADVANCED_FACE('',(#556),#574,.F.);-#556 = FACE_BOUND('',#557,.F.);-#557 = EDGE_LOOP('',(#558,#559,#567,#573));-#558 = ORIENTED_EDGE('',*,*,#488,.T.);-#559 = ORIENTED_EDGE('',*,*,#560,.F.);-#560 = EDGE_CURVE('',#561,#489,#563,.T.);-#561 = VERTEX_POINT('',#562);-#562 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#563 = LINE('',#564,#565);-#564 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#565 = VECTOR('',#566,1.);-#566 = DIRECTION('',(0.,-1.,0.));-#567 = ORIENTED_EDGE('',*,*,#568,.F.);-#568 = EDGE_CURVE('',#464,#561,#569,.T.);+#524 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#525 = ORIENTED_EDGE('',*,*,#487,.T.);+#526 = ORIENTED_EDGE('',*,*,#457,.F.);+#527 = ORIENTED_EDGE('',*,*,#528,.T.);+#528 = EDGE_CURVE('',#450,#519,#529,.T.);+#529 = LINE('',#530,#531);+#530 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#531 = VECTOR('',#532,1.);+#532 = DIRECTION('',(0.,-1.,0.));+#533 = PLANE('',#534);+#534 = AXIS2_PLACEMENT_3D('',#535,#536,#537);+#535 = CARTESIAN_POINT('',(-2.4875,2.925,0.));+#536 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#537 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#538 = ADVANCED_FACE('',(#539),#557,.F.);+#539 = FACE_BOUND('',#540,.F.);+#540 = EDGE_LOOP('',(#541,#549,#550,#551));+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#543,#519,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#545 = LINE('',#546,#547);+#546 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#547 = VECTOR('',#548,1.);+#548 = DIRECTION('',(1.,0.,0.));+#549 = ORIENTED_EDGE('',*,*,#528,.F.);+#550 = ORIENTED_EDGE('',*,*,#449,.F.);+#551 = ORIENTED_EDGE('',*,*,#552,.T.);+#552 = EDGE_CURVE('',#442,#543,#553,.T.);+#553 = LINE('',#554,#555);+#554 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#555 = VECTOR('',#556,1.);+#556 = DIRECTION('',(0.,-1.,0.));+#557 = PLANE('',#558);+#558 = AXIS2_PLACEMENT_3D('',#559,#560,#561);+#559 = CARTESIAN_POINT('',(-3.205,2.925,0.));+#560 = DIRECTION('',(-0.,0.,1.));+#561 = DIRECTION('',(1.,0.,0.));+#562 = ADVANCED_FACE('',(#563),#581,.F.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#573,#574,#575));+#565 = ORIENTED_EDGE('',*,*,#566,.T.);+#566 = EDGE_CURVE('',#567,#543,#569,.T.);+#567 = VERTEX_POINT('',#568);+#568 = CARTESIAN_POINT('',(-3.205,2.775,0.15)); #569 = LINE('',#570,#571);-#570 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#570 = CARTESIAN_POINT('',(-3.205,2.775,0.15)); #571 = VECTOR('',#572,1.);-#572 = DIRECTION('',(-1.,0.,0.));-#573 = ORIENTED_EDGE('',*,*,#463,.T.);-#574 = PLANE('',#575);-#575 = AXIS2_PLACEMENT_3D('',#576,#577,#578);-#576 = CARTESIAN_POINT('',(-2.6375,2.925,0.15));-#577 = DIRECTION('',(-0.,-0.,-1.));-#578 = DIRECTION('',(-1.,0.,0.));-#579 = ADVANCED_FACE('',(#580),#609,.F.);-#580 = FACE_BOUND('',#581,.F.);-#581 = EDGE_LOOP('',(#582,#583,#584,#585,#593,#601,#607,#608));-#582 = ORIENTED_EDGE('',*,*,#410,.T.);-#583 = ORIENTED_EDGE('',*,*,#471,.T.);-#584 = ORIENTED_EDGE('',*,*,#568,.T.);-#585 = ORIENTED_EDGE('',*,*,#586,.T.);-#586 = EDGE_CURVE('',#561,#587,#589,.T.);-#587 = VERTEX_POINT('',#588);-#588 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#589 = LINE('',#590,#591);-#590 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#591 = VECTOR('',#592,1.);-#592 = DIRECTION('',(0.,0.,-1.));-#593 = ORIENTED_EDGE('',*,*,#594,.T.);-#594 = EDGE_CURVE('',#587,#595,#597,.T.);-#595 = VERTEX_POINT('',#596);-#596 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#597 = LINE('',#598,#599);-#598 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#599 = VECTOR('',#600,1.);-#600 = DIRECTION('',(1.,0.,0.));-#601 = ORIENTED_EDGE('',*,*,#602,.T.);-#602 = EDGE_CURVE('',#595,#536,#603,.T.);-#603 = LINE('',#604,#605);-#604 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#605 = VECTOR('',#606,1.);-#606 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#607 = ORIENTED_EDGE('',*,*,#545,.T.);-#608 = ORIENTED_EDGE('',*,*,#441,.T.);-#609 = PLANE('',#610);-#610 = AXIS2_PLACEMENT_3D('',#611,#612,#613);-#611 = CARTESIAN_POINT('',(-2.634182274245,3.075,0.217942023204));-#612 = DIRECTION('',(-0.,-1.,-0.));-#613 = DIRECTION('',(0.,0.,-1.));-#614 = ADVANCED_FACE('',(#615),#626,.F.);-#615 = FACE_BOUND('',#616,.F.);-#616 = EDGE_LOOP('',(#617,#618,#624,#625));-#617 = ORIENTED_EDGE('',*,*,#496,.T.);-#618 = ORIENTED_EDGE('',*,*,#619,.F.);-#619 = EDGE_CURVE('',#587,#497,#620,.T.);-#620 = LINE('',#621,#622);-#621 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#622 = VECTOR('',#623,1.);-#623 = DIRECTION('',(0.,-1.,0.));-#624 = ORIENTED_EDGE('',*,*,#586,.F.);-#625 = ORIENTED_EDGE('',*,*,#560,.T.);-#626 = PLANE('',#627);-#627 = AXIS2_PLACEMENT_3D('',#628,#629,#630);-#628 = CARTESIAN_POINT('',(-3.205,2.925,0.15));-#629 = DIRECTION('',(1.,0.,0.));-#630 = DIRECTION('',(0.,0.,-1.));-#631 = ADVANCED_FACE('',(#632),#643,.F.);-#632 = FACE_BOUND('',#633,.F.);-#633 = EDGE_LOOP('',(#634,#635,#641,#642));-#634 = ORIENTED_EDGE('',*,*,#504,.T.);-#635 = ORIENTED_EDGE('',*,*,#636,.F.);-#636 = EDGE_CURVE('',#595,#505,#637,.T.);-#637 = LINE('',#638,#639);-#638 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#639 = VECTOR('',#640,1.);-#640 = DIRECTION('',(0.,-1.,0.));-#641 = ORIENTED_EDGE('',*,*,#594,.F.);-#642 = ORIENTED_EDGE('',*,*,#619,.T.);+#572 = DIRECTION('',(0.,0.,-1.));+#573 = ORIENTED_EDGE('',*,*,#552,.F.);+#574 = ORIENTED_EDGE('',*,*,#441,.F.);+#575 = ORIENTED_EDGE('',*,*,#576,.T.);+#576 = EDGE_CURVE('',#434,#567,#577,.T.);+#577 = LINE('',#578,#579);+#578 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#579 = VECTOR('',#580,1.);+#580 = DIRECTION('',(0.,-1.,0.));+#581 = PLANE('',#582);+#582 = AXIS2_PLACEMENT_3D('',#583,#584,#585);+#583 = CARTESIAN_POINT('',(-3.205,2.925,0.15));+#584 = DIRECTION('',(1.,0.,0.));+#585 = DIRECTION('',(0.,0.,-1.));+#586 = ADVANCED_FACE('',(#587),#605,.F.);+#587 = FACE_BOUND('',#588,.F.);+#588 = EDGE_LOOP('',(#589,#597,#598,#599));+#589 = ORIENTED_EDGE('',*,*,#590,.T.);+#590 = EDGE_CURVE('',#591,#567,#593,.T.);+#591 = VERTEX_POINT('',#592);+#592 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#593 = LINE('',#594,#595);+#594 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#595 = VECTOR('',#596,1.);+#596 = DIRECTION('',(-1.,0.,0.));+#597 = ORIENTED_EDGE('',*,*,#576,.F.);+#598 = ORIENTED_EDGE('',*,*,#433,.F.);+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#426,#591,#601,.T.);+#601 = LINE('',#602,#603);+#602 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#603 = VECTOR('',#604,1.);+#604 = DIRECTION('',(0.,-1.,0.));+#605 = PLANE('',#606);+#606 = AXIS2_PLACEMENT_3D('',#607,#608,#609);+#607 = CARTESIAN_POINT('',(-2.6375,2.925,0.15));+#608 = DIRECTION('',(-0.,-0.,-1.));+#609 = DIRECTION('',(-1.,0.,0.));+#610 = ADVANCED_FACE('',(#611),#622,.F.);+#611 = FACE_BOUND('',#612,.F.);+#612 = EDGE_LOOP('',(#613,#619,#620,#621));+#613 = ORIENTED_EDGE('',*,*,#614,.T.);+#614 = EDGE_CURVE('',#395,#591,#615,.T.);+#615 = LINE('',#616,#617);+#616 = CARTESIAN_POINT('',(-2.35,2.775,0.595));+#617 = VECTOR('',#618,1.);+#618 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#619 = ORIENTED_EDGE('',*,*,#600,.F.);+#620 = ORIENTED_EDGE('',*,*,#425,.F.);+#621 = ORIENTED_EDGE('',*,*,#402,.T.);+#622 = PLANE('',#623);+#623 = AXIS2_PLACEMENT_3D('',#624,#625,#626);+#624 = CARTESIAN_POINT('',(-2.35,2.925,0.595));+#625 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#626 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#627 = ADVANCED_FACE('',(#628),#643,.T.);+#628 = FACE_BOUND('',#629,.T.);+#629 = EDGE_LOOP('',(#630,#631,#632,#633,#634,#635,#636,#637));+#630 = ORIENTED_EDGE('',*,*,#394,.T.);+#631 = ORIENTED_EDGE('',*,*,#614,.T.);+#632 = ORIENTED_EDGE('',*,*,#590,.T.);+#633 = ORIENTED_EDGE('',*,*,#566,.T.);+#634 = ORIENTED_EDGE('',*,*,#542,.T.);+#635 = ORIENTED_EDGE('',*,*,#518,.T.);+#636 = ORIENTED_EDGE('',*,*,#495,.T.);+#637 = ORIENTED_EDGE('',*,*,#638,.T.);+#638 = EDGE_CURVE('',#496,#385,#639,.T.);+#639 = LINE('',#640,#641);+#640 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#641 = VECTOR('',#642,1.);+#642 = DIRECTION('',(0.,0.,1.)); #643 = PLANE('',#644); #644 = AXIS2_PLACEMENT_3D('',#645,#646,#647);-#645 = CARTESIAN_POINT('',(-3.205,2.925,0.));-#646 = DIRECTION('',(-0.,0.,1.));-#647 = DIRECTION('',(1.,0.,0.));+#645 = CARTESIAN_POINT('',(-2.634182274245,2.775,0.217942023204));+#646 = DIRECTION('',(-0.,-1.,-0.));+#647 = DIRECTION('',(0.,0.,-1.)); #648 = ADVANCED_FACE('',(#649),#655,.F.); #649 = FACE_BOUND('',#650,.F.); #650 = EDGE_LOOP('',(#651,#652,#653,#654));-#651 = ORIENTED_EDGE('',*,*,#512,.T.);-#652 = ORIENTED_EDGE('',*,*,#535,.T.);-#653 = ORIENTED_EDGE('',*,*,#602,.F.);-#654 = ORIENTED_EDGE('',*,*,#636,.T.);+#651 = ORIENTED_EDGE('',*,*,#503,.F.);+#652 = ORIENTED_EDGE('',*,*,#638,.T.);+#653 = ORIENTED_EDGE('',*,*,#384,.T.);+#654 = ORIENTED_EDGE('',*,*,#473,.F.); #655 = PLANE('',#656); #656 = AXIS2_PLACEMENT_3D('',#657,#658,#659);-#657 = CARTESIAN_POINT('',(-2.4875,2.925,0.));-#658 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#659 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#657 = CARTESIAN_POINT('',(-2.15,2.925,0.445));+#658 = DIRECTION('',(-1.,0.,0.));+#659 = DIRECTION('',(0.,0.,1.)); #660 = MANIFOLD_SOLID_BREP('',#661);-#661 = CLOSED_SHELL('',(#662,#702,#733,#764,#813,#837,#861,#896,#913,+#661 = CLOSED_SHELL('',(#662,#702,#765,#796,#820,#844,#868,#892,#909, #930)); #662 = ADVANCED_FACE('',(#663),#697,.F.); #663 = FACE_BOUND('',#664,.F.);@@ -735,249 +735,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #699 = CARTESIAN_POINT('',(-2.15,2.275,0.595)); #700 = DIRECTION('',(-0.,-0.,-1.)); #701 = DIRECTION('',(-1.,0.,0.));-#702 = ADVANCED_FACE('',(#703),#728,.F.);+#702 = ADVANCED_FACE('',(#703),#760,.F.); #703 = FACE_BOUND('',#704,.F.);-#704 = EDGE_LOOP('',(#705,#715,#721,#722));-#705 = ORIENTED_EDGE('',*,*,#706,.F.);-#706 = EDGE_CURVE('',#707,#709,#711,.T.);-#707 = VERTEX_POINT('',#708);-#708 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#709 = VERTEX_POINT('',#710);-#710 = CARTESIAN_POINT('',(-2.15,2.425,0.445));-#711 = LINE('',#712,#713);-#712 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#713 = VECTOR('',#714,1.);-#714 = DIRECTION('',(0.,1.,0.));-#715 = ORIENTED_EDGE('',*,*,#716,.T.);-#716 = EDGE_CURVE('',#707,#667,#717,.T.);-#717 = LINE('',#718,#719);-#718 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#719 = VECTOR('',#720,1.);-#720 = DIRECTION('',(0.,0.,1.));-#721 = ORIENTED_EDGE('',*,*,#666,.T.);-#722 = ORIENTED_EDGE('',*,*,#723,.F.);-#723 = EDGE_CURVE('',#709,#669,#724,.T.);-#724 = LINE('',#725,#726);-#725 = CARTESIAN_POINT('',(-2.15,2.425,0.445));-#726 = VECTOR('',#727,1.);-#727 = DIRECTION('',(0.,0.,1.));-#728 = PLANE('',#729);-#729 = AXIS2_PLACEMENT_3D('',#730,#731,#732);-#730 = CARTESIAN_POINT('',(-2.15,2.275,0.445));-#731 = DIRECTION('',(-1.,0.,0.));-#732 = DIRECTION('',(0.,0.,1.));-#733 = ADVANCED_FACE('',(#734),#759,.F.);-#734 = FACE_BOUND('',#735,.F.);-#735 = EDGE_LOOP('',(#736,#744,#752,#758));-#736 = ORIENTED_EDGE('',*,*,#737,.T.);-#737 = EDGE_CURVE('',#677,#738,#740,.T.);-#738 = VERTEX_POINT('',#739);-#739 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));-#740 = LINE('',#741,#742);-#741 = CARTESIAN_POINT('',(-2.35,2.125,0.595));-#742 = VECTOR('',#743,1.);-#743 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#744 = ORIENTED_EDGE('',*,*,#745,.F.);-#745 = EDGE_CURVE('',#746,#738,#748,.T.);-#746 = VERTEX_POINT('',#747);-#747 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));-#748 = LINE('',#749,#750);-#749 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));-#750 = VECTOR('',#751,1.);-#751 = DIRECTION('',(0.,-1.,0.));-#752 = ORIENTED_EDGE('',*,*,#753,.F.);-#753 = EDGE_CURVE('',#685,#746,#754,.T.);-#754 = LINE('',#755,#756);-#755 = CARTESIAN_POINT('',(-2.35,2.425,0.595));-#756 = VECTOR('',#757,1.);-#757 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#758 = ORIENTED_EDGE('',*,*,#684,.T.);-#759 = PLANE('',#760);-#760 = AXIS2_PLACEMENT_3D('',#761,#762,#763);-#761 = CARTESIAN_POINT('',(-2.35,2.275,0.595));-#762 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#763 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#764 = ADVANCED_FACE('',(#765),#808,.T.);-#765 = FACE_BOUND('',#766,.T.);-#766 = EDGE_LOOP('',(#767,#768,#769,#777,#785,#793,#801,#807));-#767 = ORIENTED_EDGE('',*,*,#676,.T.);-#768 = ORIENTED_EDGE('',*,*,#737,.T.);-#769 = ORIENTED_EDGE('',*,*,#770,.T.);-#770 = EDGE_CURVE('',#738,#771,#773,.T.);-#771 = VERTEX_POINT('',#772);-#772 = CARTESIAN_POINT('',(-3.205,2.125,0.15));-#773 = LINE('',#774,#775);-#774 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));-#775 = VECTOR('',#776,1.);-#776 = DIRECTION('',(-1.,0.,0.));-#777 = ORIENTED_EDGE('',*,*,#778,.T.);-#778 = EDGE_CURVE('',#771,#779,#781,.T.);-#779 = VERTEX_POINT('',#780);-#780 = CARTESIAN_POINT('',(-3.205,2.125,0.));-#781 = LINE('',#782,#783);-#782 = CARTESIAN_POINT('',(-3.205,2.125,0.15));-#783 = VECTOR('',#784,1.);-#784 = DIRECTION('',(0.,0.,-1.));-#785 = ORIENTED_EDGE('',*,*,#786,.T.);-#786 = EDGE_CURVE('',#779,#787,#789,.T.);-#787 = VERTEX_POINT('',#788);-#788 = CARTESIAN_POINT('',(-2.4875,2.125,0.));-#789 = LINE('',#790,#791);-#790 = CARTESIAN_POINT('',(-3.205,2.125,0.));-#791 = VECTOR('',#792,1.);-#792 = DIRECTION('',(1.,0.,0.));-#793 = ORIENTED_EDGE('',*,*,#794,.T.);-#794 = EDGE_CURVE('',#787,#795,#797,.T.);-#795 = VERTEX_POINT('',#796);-#796 = CARTESIAN_POINT('',(-2.2,2.125,0.445));-#797 = LINE('',#798,#799);-#798 = CARTESIAN_POINT('',(-2.4875,2.125,0.));-#799 = VECTOR('',#800,1.);-#800 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#801 = ORIENTED_EDGE('',*,*,#802,.T.);-#802 = EDGE_CURVE('',#795,#707,#803,.T.);+#704 = EDGE_LOOP('',(#705,#706,#714,#722,#730,#738,#746,#754));+#705 = ORIENTED_EDGE('',*,*,#692,.T.);+#706 = ORIENTED_EDGE('',*,*,#707,.T.);+#707 = EDGE_CURVE('',#685,#708,#710,.T.);+#708 = VERTEX_POINT('',#709);+#709 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#710 = LINE('',#711,#712);+#711 = CARTESIAN_POINT('',(-2.35,2.425,0.595));+#712 = VECTOR('',#713,1.);+#713 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#714 = ORIENTED_EDGE('',*,*,#715,.T.);+#715 = EDGE_CURVE('',#708,#716,#718,.T.);+#716 = VERTEX_POINT('',#717);+#717 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#718 = LINE('',#719,#720);+#719 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#720 = VECTOR('',#721,1.);+#721 = DIRECTION('',(-1.,0.,0.));+#722 = ORIENTED_EDGE('',*,*,#723,.T.);+#723 = EDGE_CURVE('',#716,#724,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#726 = LINE('',#727,#728);+#727 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#728 = VECTOR('',#729,1.);+#729 = DIRECTION('',(0.,0.,-1.));+#730 = ORIENTED_EDGE('',*,*,#731,.T.);+#731 = EDGE_CURVE('',#724,#732,#734,.T.);+#732 = VERTEX_POINT('',#733);+#733 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#734 = LINE('',#735,#736);+#735 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#736 = VECTOR('',#737,1.);+#737 = DIRECTION('',(1.,0.,0.));+#738 = ORIENTED_EDGE('',*,*,#739,.T.);+#739 = EDGE_CURVE('',#732,#740,#742,.T.);+#740 = VERTEX_POINT('',#741);+#741 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#742 = LINE('',#743,#744);+#743 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#744 = VECTOR('',#745,1.);+#745 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#746 = ORIENTED_EDGE('',*,*,#747,.T.);+#747 = EDGE_CURVE('',#740,#748,#750,.T.);+#748 = VERTEX_POINT('',#749);+#749 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#750 = LINE('',#751,#752);+#751 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#752 = VECTOR('',#753,1.);+#753 = DIRECTION('',(1.,0.,0.));+#754 = ORIENTED_EDGE('',*,*,#755,.T.);+#755 = EDGE_CURVE('',#748,#669,#756,.T.);+#756 = LINE('',#757,#758);+#757 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#758 = VECTOR('',#759,1.);+#759 = DIRECTION('',(0.,0.,1.));+#760 = PLANE('',#761);+#761 = AXIS2_PLACEMENT_3D('',#762,#763,#764);+#762 = CARTESIAN_POINT('',(-2.634182274245,2.425,0.217942023204));+#763 = DIRECTION('',(-0.,-1.,-0.));+#764 = DIRECTION('',(0.,0.,-1.));+#765 = ADVANCED_FACE('',(#766),#791,.F.);+#766 = FACE_BOUND('',#767,.F.);+#767 = EDGE_LOOP('',(#768,#776,#784,#790));+#768 = ORIENTED_EDGE('',*,*,#769,.F.);+#769 = EDGE_CURVE('',#770,#740,#772,.T.);+#770 = VERTEX_POINT('',#771);+#771 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#772 = LINE('',#773,#774);+#773 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#774 = VECTOR('',#775,1.);+#775 = DIRECTION('',(0.,1.,0.));+#776 = ORIENTED_EDGE('',*,*,#777,.T.);+#777 = EDGE_CURVE('',#770,#778,#780,.T.);+#778 = VERTEX_POINT('',#779);+#779 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#780 = LINE('',#781,#782);+#781 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#782 = VECTOR('',#783,1.);+#783 = DIRECTION('',(1.,0.,0.));+#784 = ORIENTED_EDGE('',*,*,#785,.T.);+#785 = EDGE_CURVE('',#778,#748,#786,.T.);+#786 = LINE('',#787,#788);+#787 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#788 = VECTOR('',#789,1.);+#789 = DIRECTION('',(0.,1.,0.));+#790 = ORIENTED_EDGE('',*,*,#747,.F.);+#791 = PLANE('',#792);+#792 = AXIS2_PLACEMENT_3D('',#793,#794,#795);+#793 = CARTESIAN_POINT('',(-2.2,2.275,0.445));+#794 = DIRECTION('',(-0.,0.,1.));+#795 = DIRECTION('',(1.,0.,0.));+#796 = ADVANCED_FACE('',(#797),#815,.F.);+#797 = FACE_BOUND('',#798,.F.);+#798 = EDGE_LOOP('',(#799,#807,#808,#809));+#799 = ORIENTED_EDGE('',*,*,#800,.T.);+#800 = EDGE_CURVE('',#801,#770,#803,.T.);+#801 = VERTEX_POINT('',#802);+#802 = CARTESIAN_POINT('',(-2.4875,2.125,0.)); #803 = LINE('',#804,#805);-#804 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#804 = CARTESIAN_POINT('',(-2.4875,2.125,0.)); #805 = VECTOR('',#806,1.);-#806 = DIRECTION('',(1.,0.,0.));-#807 = ORIENTED_EDGE('',*,*,#716,.T.);-#808 = PLANE('',#809);-#809 = AXIS2_PLACEMENT_3D('',#810,#811,#812);-#810 = CARTESIAN_POINT('',(-2.634182274245,2.125,0.217942023204));-#811 = DIRECTION('',(-0.,-1.,-0.));-#812 = DIRECTION('',(0.,0.,-1.));-#813 = ADVANCED_FACE('',(#814),#832,.F.);-#814 = FACE_BOUND('',#815,.F.);-#815 = EDGE_LOOP('',(#816,#824,#825,#826));-#816 = ORIENTED_EDGE('',*,*,#817,.F.);-#817 = EDGE_CURVE('',#795,#818,#820,.T.);-#818 = VERTEX_POINT('',#819);-#819 = CARTESIAN_POINT('',(-2.2,2.425,0.445));-#820 = LINE('',#821,#822);-#821 = CARTESIAN_POINT('',(-2.2,2.125,0.445));-#822 = VECTOR('',#823,1.);-#823 = DIRECTION('',(0.,1.,0.));-#824 = ORIENTED_EDGE('',*,*,#802,.T.);-#825 = ORIENTED_EDGE('',*,*,#706,.T.);-#826 = ORIENTED_EDGE('',*,*,#827,.F.);-#827 = EDGE_CURVE('',#818,#709,#828,.T.);-#828 = LINE('',#829,#830);-#829 = CARTESIAN_POINT('',(-2.2,2.425,0.445));-#830 = VECTOR('',#831,1.);-#831 = DIRECTION('',(1.,0.,0.));-#832 = PLANE('',#833);-#833 = AXIS2_PLACEMENT_3D('',#834,#835,#836);-#834 = CARTESIAN_POINT('',(-2.2,2.275,0.445));-#835 = DIRECTION('',(-0.,0.,1.));-#836 = DIRECTION('',(1.,0.,0.));-#837 = ADVANCED_FACE('',(#838),#856,.F.);-#838 = FACE_BOUND('',#839,.F.);-#839 = EDGE_LOOP('',(#840,#841,#849,#855));-#840 = ORIENTED_EDGE('',*,*,#770,.T.);-#841 = ORIENTED_EDGE('',*,*,#842,.F.);-#842 = EDGE_CURVE('',#843,#771,#845,.T.);-#843 = VERTEX_POINT('',#844);-#844 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#845 = LINE('',#846,#847);-#846 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#847 = VECTOR('',#848,1.);-#848 = DIRECTION('',(0.,-1.,0.));-#849 = ORIENTED_EDGE('',*,*,#850,.F.);-#850 = EDGE_CURVE('',#746,#843,#851,.T.);+#806 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#807 = ORIENTED_EDGE('',*,*,#769,.T.);+#808 = ORIENTED_EDGE('',*,*,#739,.F.);+#809 = ORIENTED_EDGE('',*,*,#810,.T.);+#810 = EDGE_CURVE('',#732,#801,#811,.T.);+#811 = LINE('',#812,#813);+#812 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#813 = VECTOR('',#814,1.);+#814 = DIRECTION('',(0.,-1.,0.));+#815 = PLANE('',#816);+#816 = AXIS2_PLACEMENT_3D('',#817,#818,#819);+#817 = CARTESIAN_POINT('',(-2.4875,2.275,0.));+#818 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#819 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#820 = ADVANCED_FACE('',(#821),#839,.F.);+#821 = FACE_BOUND('',#822,.F.);+#822 = EDGE_LOOP('',(#823,#831,#832,#833));+#823 = ORIENTED_EDGE('',*,*,#824,.T.);+#824 = EDGE_CURVE('',#825,#801,#827,.T.);+#825 = VERTEX_POINT('',#826);+#826 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#827 = LINE('',#828,#829);+#828 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#829 = VECTOR('',#830,1.);+#830 = DIRECTION('',(1.,0.,0.));+#831 = ORIENTED_EDGE('',*,*,#810,.F.);+#832 = ORIENTED_EDGE('',*,*,#731,.F.);+#833 = ORIENTED_EDGE('',*,*,#834,.T.);+#834 = EDGE_CURVE('',#724,#825,#835,.T.);+#835 = LINE('',#836,#837);+#836 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#837 = VECTOR('',#838,1.);+#838 = DIRECTION('',(0.,-1.,0.));+#839 = PLANE('',#840);+#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843);+#841 = CARTESIAN_POINT('',(-3.205,2.275,0.));+#842 = DIRECTION('',(-0.,0.,1.));+#843 = DIRECTION('',(1.,0.,0.));+#844 = ADVANCED_FACE('',(#845),#863,.F.);+#845 = FACE_BOUND('',#846,.F.);+#846 = EDGE_LOOP('',(#847,#855,#856,#857));+#847 = ORIENTED_EDGE('',*,*,#848,.T.);+#848 = EDGE_CURVE('',#849,#825,#851,.T.);+#849 = VERTEX_POINT('',#850);+#850 = CARTESIAN_POINT('',(-3.205,2.125,0.15)); #851 = LINE('',#852,#853);-#852 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#852 = CARTESIAN_POINT('',(-3.205,2.125,0.15)); #853 = VECTOR('',#854,1.);-#854 = DIRECTION('',(-1.,0.,0.));-#855 = ORIENTED_EDGE('',*,*,#745,.T.);-#856 = PLANE('',#857);-#857 = AXIS2_PLACEMENT_3D('',#858,#859,#860);-#858 = CARTESIAN_POINT('',(-2.6375,2.275,0.15));-#859 = DIRECTION('',(-0.,-0.,-1.));-#860 = DIRECTION('',(-1.,0.,0.));-#861 = ADVANCED_FACE('',(#862),#891,.F.);-#862 = FACE_BOUND('',#863,.F.);-#863 = EDGE_LOOP('',(#864,#865,#866,#867,#875,#883,#889,#890));-#864 = ORIENTED_EDGE('',*,*,#692,.T.);-#865 = ORIENTED_EDGE('',*,*,#753,.T.);-#866 = ORIENTED_EDGE('',*,*,#850,.T.);-#867 = ORIENTED_EDGE('',*,*,#868,.T.);-#868 = EDGE_CURVE('',#843,#869,#871,.T.);-#869 = VERTEX_POINT('',#870);-#870 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#871 = LINE('',#872,#873);-#872 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#873 = VECTOR('',#874,1.);-#874 = DIRECTION('',(0.,0.,-1.));-#875 = ORIENTED_EDGE('',*,*,#876,.T.);-#876 = EDGE_CURVE('',#869,#877,#879,.T.);-#877 = VERTEX_POINT('',#878);-#878 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#879 = LINE('',#880,#881);-#880 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#881 = VECTOR('',#882,1.);-#882 = DIRECTION('',(1.,0.,0.));-#883 = ORIENTED_EDGE('',*,*,#884,.T.);-#884 = EDGE_CURVE('',#877,#818,#885,.T.);-#885 = LINE('',#886,#887);-#886 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#887 = VECTOR('',#888,1.);-#888 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#889 = ORIENTED_EDGE('',*,*,#827,.T.);-#890 = ORIENTED_EDGE('',*,*,#723,.T.);-#891 = PLANE('',#892);-#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895);-#893 = CARTESIAN_POINT('',(-2.634182274245,2.425,0.217942023204));-#894 = DIRECTION('',(-0.,-1.,-0.));-#895 = DIRECTION('',(0.,0.,-1.));-#896 = ADVANCED_FACE('',(#897),#908,.F.);-#897 = FACE_BOUND('',#898,.F.);-#898 = EDGE_LOOP('',(#899,#900,#906,#907));-#899 = ORIENTED_EDGE('',*,*,#778,.T.);-#900 = ORIENTED_EDGE('',*,*,#901,.F.);-#901 = EDGE_CURVE('',#869,#779,#902,.T.);-#902 = LINE('',#903,#904);-#903 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#904 = VECTOR('',#905,1.);-#905 = DIRECTION('',(0.,-1.,0.));-#906 = ORIENTED_EDGE('',*,*,#868,.F.);-#907 = ORIENTED_EDGE('',*,*,#842,.T.);-#908 = PLANE('',#909);-#909 = AXIS2_PLACEMENT_3D('',#910,#911,#912);-#910 = CARTESIAN_POINT('',(-3.205,2.275,0.15));-#911 = DIRECTION('',(1.,0.,0.));-#912 = DIRECTION('',(0.,0.,-1.));-#913 = ADVANCED_FACE('',(#914),#925,.F.);-#914 = FACE_BOUND('',#915,.F.);-#915 = EDGE_LOOP('',(#916,#917,#923,#924));-#916 = ORIENTED_EDGE('',*,*,#786,.T.);-#917 = ORIENTED_EDGE('',*,*,#918,.F.);-#918 = EDGE_CURVE('',#877,#787,#919,.T.);-#919 = LINE('',#920,#921);-#920 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#921 = VECTOR('',#922,1.);-#922 = DIRECTION('',(0.,-1.,0.));-#923 = ORIENTED_EDGE('',*,*,#876,.F.);-#924 = ORIENTED_EDGE('',*,*,#901,.T.);+#854 = DIRECTION('',(0.,0.,-1.));+#855 = ORIENTED_EDGE('',*,*,#834,.F.);+#856 = ORIENTED_EDGE('',*,*,#723,.F.);+#857 = ORIENTED_EDGE('',*,*,#858,.T.);+#858 = EDGE_CURVE('',#716,#849,#859,.T.);+#859 = LINE('',#860,#861);+#860 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#861 = VECTOR('',#862,1.);+#862 = DIRECTION('',(0.,-1.,0.));+#863 = PLANE('',#864);+#864 = AXIS2_PLACEMENT_3D('',#865,#866,#867);+#865 = CARTESIAN_POINT('',(-3.205,2.275,0.15));+#866 = DIRECTION('',(1.,0.,0.));+#867 = DIRECTION('',(0.,0.,-1.));+#868 = ADVANCED_FACE('',(#869),#887,.F.);+#869 = FACE_BOUND('',#870,.F.);+#870 = EDGE_LOOP('',(#871,#879,#880,#881));+#871 = ORIENTED_EDGE('',*,*,#872,.T.);+#872 = EDGE_CURVE('',#873,#849,#875,.T.);+#873 = VERTEX_POINT('',#874);+#874 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#875 = LINE('',#876,#877);+#876 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#877 = VECTOR('',#878,1.);+#878 = DIRECTION('',(-1.,0.,0.));+#879 = ORIENTED_EDGE('',*,*,#858,.F.);+#880 = ORIENTED_EDGE('',*,*,#715,.F.);+#881 = ORIENTED_EDGE('',*,*,#882,.T.);+#882 = EDGE_CURVE('',#708,#873,#883,.T.);+#883 = LINE('',#884,#885);+#884 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#885 = VECTOR('',#886,1.);+#886 = DIRECTION('',(0.,-1.,0.));+#887 = PLANE('',#888);+#888 = AXIS2_PLACEMENT_3D('',#889,#890,#891);+#889 = CARTESIAN_POINT('',(-2.6375,2.275,0.15));+#890 = DIRECTION('',(-0.,-0.,-1.));+#891 = DIRECTION('',(-1.,0.,0.));+#892 = ADVANCED_FACE('',(#893),#904,.F.);+#893 = FACE_BOUND('',#894,.F.);+#894 = EDGE_LOOP('',(#895,#901,#902,#903));+#895 = ORIENTED_EDGE('',*,*,#896,.T.);+#896 = EDGE_CURVE('',#677,#873,#897,.T.);+#897 = LINE('',#898,#899);+#898 = CARTESIAN_POINT('',(-2.35,2.125,0.595));+#899 = VECTOR('',#900,1.);+#900 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#901 = ORIENTED_EDGE('',*,*,#882,.F.);+#902 = ORIENTED_EDGE('',*,*,#707,.F.);+#903 = ORIENTED_EDGE('',*,*,#684,.T.);+#904 = PLANE('',#905);+#905 = AXIS2_PLACEMENT_3D('',#906,#907,#908);+#906 = CARTESIAN_POINT('',(-2.35,2.275,0.595));+#907 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#908 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#909 = ADVANCED_FACE('',(#910),#925,.T.);+#910 = FACE_BOUND('',#911,.T.);+#911 = EDGE_LOOP('',(#912,#913,#914,#915,#916,#917,#918,#919));+#912 = ORIENTED_EDGE('',*,*,#676,.T.);+#913 = ORIENTED_EDGE('',*,*,#896,.T.);+#914 = ORIENTED_EDGE('',*,*,#872,.T.);+#915 = ORIENTED_EDGE('',*,*,#848,.T.);+#916 = ORIENTED_EDGE('',*,*,#824,.T.);+#917 = ORIENTED_EDGE('',*,*,#800,.T.);+#918 = ORIENTED_EDGE('',*,*,#777,.T.);+#919 = ORIENTED_EDGE('',*,*,#920,.T.);+#920 = EDGE_CURVE('',#778,#667,#921,.T.);+#921 = LINE('',#922,#923);+#922 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#923 = VECTOR('',#924,1.);+#924 = DIRECTION('',(0.,0.,1.)); #925 = PLANE('',#926); #926 = AXIS2_PLACEMENT_3D('',#927,#928,#929);-#927 = CARTESIAN_POINT('',(-3.205,2.275,0.));-#928 = DIRECTION('',(-0.,0.,1.));-#929 = DIRECTION('',(1.,0.,0.));+#927 = CARTESIAN_POINT('',(-2.634182274245,2.125,0.217942023204));+#928 = DIRECTION('',(-0.,-1.,-0.));+#929 = DIRECTION('',(0.,0.,-1.)); #930 = ADVANCED_FACE('',(#931),#937,.F.); #931 = FACE_BOUND('',#932,.F.); #932 = EDGE_LOOP('',(#933,#934,#935,#936));-#933 = ORIENTED_EDGE('',*,*,#794,.T.);-#934 = ORIENTED_EDGE('',*,*,#817,.T.);-#935 = ORIENTED_EDGE('',*,*,#884,.F.);-#936 = ORIENTED_EDGE('',*,*,#918,.T.);+#933 = ORIENTED_EDGE('',*,*,#785,.F.);+#934 = ORIENTED_EDGE('',*,*,#920,.T.);+#935 = ORIENTED_EDGE('',*,*,#666,.T.);+#936 = ORIENTED_EDGE('',*,*,#755,.F.); #937 = PLANE('',#938); #938 = AXIS2_PLACEMENT_3D('',#939,#940,#941);-#939 = CARTESIAN_POINT('',(-2.4875,2.275,0.));-#940 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#941 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#939 = CARTESIAN_POINT('',(-2.15,2.275,0.445));+#940 = DIRECTION('',(-1.,0.,0.));+#941 = DIRECTION('',(0.,0.,1.)); #942 = MANIFOLD_SOLID_BREP('',#943);-#943 = CLOSED_SHELL('',(#944,#984,#1015,#1046,#1095,#1119,#1143,#1178,- #1195,#1212));+#943 = CLOSED_SHELL('',(#944,#984,#1047,#1078,#1102,#1126,#1150,#1174,+ #1191,#1212)); #944 = ADVANCED_FACE('',(#945),#979,.F.); #945 = FACE_BOUND('',#946,.F.); #946 = EDGE_LOOP('',(#947,#957,#965,#973));@@ -1018,249 +1018,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #981 = CARTESIAN_POINT('',(-2.15,1.625,0.595)); #982 = DIRECTION('',(-0.,-0.,-1.)); #983 = DIRECTION('',(-1.,0.,0.));-#984 = ADVANCED_FACE('',(#985),#1010,.F.);+#984 = ADVANCED_FACE('',(#985),#1042,.F.); #985 = FACE_BOUND('',#986,.F.);-#986 = EDGE_LOOP('',(#987,#997,#1003,#1004));-#987 = ORIENTED_EDGE('',*,*,#988,.F.);-#988 = EDGE_CURVE('',#989,#991,#993,.T.);-#989 = VERTEX_POINT('',#990);-#990 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#991 = VERTEX_POINT('',#992);-#992 = CARTESIAN_POINT('',(-2.15,1.775,0.445));-#993 = LINE('',#994,#995);-#994 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#995 = VECTOR('',#996,1.);-#996 = DIRECTION('',(0.,1.,0.));-#997 = ORIENTED_EDGE('',*,*,#998,.T.);-#998 = EDGE_CURVE('',#989,#949,#999,.T.);-#999 = LINE('',#1000,#1001);-#1000 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#1001 = VECTOR('',#1002,1.);-#1002 = DIRECTION('',(0.,0.,1.));-#1003 = ORIENTED_EDGE('',*,*,#948,.T.);-#1004 = ORIENTED_EDGE('',*,*,#1005,.F.);-#1005 = EDGE_CURVE('',#991,#951,#1006,.T.);-#1006 = LINE('',#1007,#1008);-#1007 = CARTESIAN_POINT('',(-2.15,1.775,0.445));-#1008 = VECTOR('',#1009,1.);-#1009 = DIRECTION('',(0.,0.,1.));-#1010 = PLANE('',#1011);-#1011 = AXIS2_PLACEMENT_3D('',#1012,#1013,#1014);-#1012 = CARTESIAN_POINT('',(-2.15,1.625,0.445));-#1013 = DIRECTION('',(-1.,0.,0.));-#1014 = DIRECTION('',(0.,0.,1.));-#1015 = ADVANCED_FACE('',(#1016),#1041,.F.);-#1016 = FACE_BOUND('',#1017,.F.);-#1017 = EDGE_LOOP('',(#1018,#1026,#1034,#1040));-#1018 = ORIENTED_EDGE('',*,*,#1019,.T.);-#1019 = EDGE_CURVE('',#959,#1020,#1022,.T.);-#1020 = VERTEX_POINT('',#1021);-#1021 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));-#1022 = LINE('',#1023,#1024);-#1023 = CARTESIAN_POINT('',(-2.35,1.475,0.595));-#1024 = VECTOR('',#1025,1.);-#1025 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1026 = ORIENTED_EDGE('',*,*,#1027,.F.);-#1027 = EDGE_CURVE('',#1028,#1020,#1030,.T.);-#1028 = VERTEX_POINT('',#1029);-#1029 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));-#1030 = LINE('',#1031,#1032);-#1031 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));-#1032 = VECTOR('',#1033,1.);-#1033 = DIRECTION('',(0.,-1.,0.));-#1034 = ORIENTED_EDGE('',*,*,#1035,.F.);-#1035 = EDGE_CURVE('',#967,#1028,#1036,.T.);-#1036 = LINE('',#1037,#1038);-#1037 = CARTESIAN_POINT('',(-2.35,1.775,0.595));-#1038 = VECTOR('',#1039,1.);-#1039 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1040 = ORIENTED_EDGE('',*,*,#966,.T.);-#1041 = PLANE('',#1042);-#1042 = AXIS2_PLACEMENT_3D('',#1043,#1044,#1045);-#1043 = CARTESIAN_POINT('',(-2.35,1.625,0.595));-#1044 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#1045 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1046 = ADVANCED_FACE('',(#1047),#1090,.T.);-#1047 = FACE_BOUND('',#1048,.T.);-#1048 = EDGE_LOOP('',(#1049,#1050,#1051,#1059,#1067,#1075,#1083,#1089));-#1049 = ORIENTED_EDGE('',*,*,#958,.T.);-#1050 = ORIENTED_EDGE('',*,*,#1019,.T.);-#1051 = ORIENTED_EDGE('',*,*,#1052,.T.);-#1052 = EDGE_CURVE('',#1020,#1053,#1055,.T.);-#1053 = VERTEX_POINT('',#1054);-#1054 = CARTESIAN_POINT('',(-3.205,1.475,0.15));-#1055 = LINE('',#1056,#1057);-#1056 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));-#1057 = VECTOR('',#1058,1.);-#1058 = DIRECTION('',(-1.,0.,0.));-#1059 = ORIENTED_EDGE('',*,*,#1060,.T.);-#1060 = EDGE_CURVE('',#1053,#1061,#1063,.T.);-#1061 = VERTEX_POINT('',#1062);-#1062 = CARTESIAN_POINT('',(-3.205,1.475,0.));-#1063 = LINE('',#1064,#1065);-#1064 = CARTESIAN_POINT('',(-3.205,1.475,0.15));-#1065 = VECTOR('',#1066,1.);-#1066 = DIRECTION('',(0.,0.,-1.));-#1067 = ORIENTED_EDGE('',*,*,#1068,.T.);-#1068 = EDGE_CURVE('',#1061,#1069,#1071,.T.);-#1069 = VERTEX_POINT('',#1070);-#1070 = CARTESIAN_POINT('',(-2.4875,1.475,0.));-#1071 = LINE('',#1072,#1073);-#1072 = CARTESIAN_POINT('',(-3.205,1.475,0.));-#1073 = VECTOR('',#1074,1.);-#1074 = DIRECTION('',(1.,0.,0.));-#1075 = ORIENTED_EDGE('',*,*,#1076,.T.);-#1076 = EDGE_CURVE('',#1069,#1077,#1079,.T.);-#1077 = VERTEX_POINT('',#1078);-#1078 = CARTESIAN_POINT('',(-2.2,1.475,0.445));-#1079 = LINE('',#1080,#1081);-#1080 = CARTESIAN_POINT('',(-2.4875,1.475,0.));-#1081 = VECTOR('',#1082,1.);-#1082 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1083 = ORIENTED_EDGE('',*,*,#1084,.T.);-#1084 = EDGE_CURVE('',#1077,#989,#1085,.T.);+#986 = EDGE_LOOP('',(#987,#988,#996,#1004,#1012,#1020,#1028,#1036));+#987 = ORIENTED_EDGE('',*,*,#974,.T.);+#988 = ORIENTED_EDGE('',*,*,#989,.T.);+#989 = EDGE_CURVE('',#967,#990,#992,.T.);+#990 = VERTEX_POINT('',#991);+#991 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(-2.35,1.775,0.595));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#996 = ORIENTED_EDGE('',*,*,#997,.T.);+#997 = EDGE_CURVE('',#990,#998,#1000,.T.);+#998 = VERTEX_POINT('',#999);+#999 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#1000 = LINE('',#1001,#1002);+#1001 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#1002 = VECTOR('',#1003,1.);+#1003 = DIRECTION('',(-1.,0.,0.));+#1004 = ORIENTED_EDGE('',*,*,#1005,.T.);+#1005 = EDGE_CURVE('',#998,#1006,#1008,.T.);+#1006 = VERTEX_POINT('',#1007);+#1007 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#1008 = LINE('',#1009,#1010);+#1009 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#1010 = VECTOR('',#1011,1.);+#1011 = DIRECTION('',(0.,0.,-1.));+#1012 = ORIENTED_EDGE('',*,*,#1013,.T.);+#1013 = EDGE_CURVE('',#1006,#1014,#1016,.T.);+#1014 = VERTEX_POINT('',#1015);+#1015 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#1016 = LINE('',#1017,#1018);+#1017 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#1018 = VECTOR('',#1019,1.);+#1019 = DIRECTION('',(1.,0.,0.));+#1020 = ORIENTED_EDGE('',*,*,#1021,.T.);+#1021 = EDGE_CURVE('',#1014,#1022,#1024,.T.);+#1022 = VERTEX_POINT('',#1023);+#1023 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#1024 = LINE('',#1025,#1026);+#1025 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#1026 = VECTOR('',#1027,1.);+#1027 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1028 = ORIENTED_EDGE('',*,*,#1029,.T.);+#1029 = EDGE_CURVE('',#1022,#1030,#1032,.T.);+#1030 = VERTEX_POINT('',#1031);+#1031 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#1032 = LINE('',#1033,#1034);+#1033 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#1034 = VECTOR('',#1035,1.);+#1035 = DIRECTION('',(1.,0.,0.));+#1036 = ORIENTED_EDGE('',*,*,#1037,.T.);+#1037 = EDGE_CURVE('',#1030,#951,#1038,.T.);+#1038 = LINE('',#1039,#1040);+#1039 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#1040 = VECTOR('',#1041,1.);+#1041 = DIRECTION('',(0.,0.,1.));+#1042 = PLANE('',#1043);+#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046);+#1044 = CARTESIAN_POINT('',(-2.634182274245,1.775,0.217942023204));+#1045 = DIRECTION('',(-0.,-1.,-0.));+#1046 = DIRECTION('',(0.,0.,-1.));+#1047 = ADVANCED_FACE('',(#1048),#1073,.F.);+#1048 = FACE_BOUND('',#1049,.F.);+#1049 = EDGE_LOOP('',(#1050,#1058,#1066,#1072));+#1050 = ORIENTED_EDGE('',*,*,#1051,.F.);+#1051 = EDGE_CURVE('',#1052,#1022,#1054,.T.);+#1052 = VERTEX_POINT('',#1053);+#1053 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#1054 = LINE('',#1055,#1056);+#1055 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#1056 = VECTOR('',#1057,1.);+#1057 = DIRECTION('',(0.,1.,0.));+#1058 = ORIENTED_EDGE('',*,*,#1059,.T.);+#1059 = EDGE_CURVE('',#1052,#1060,#1062,.T.);+#1060 = VERTEX_POINT('',#1061);+#1061 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#1062 = LINE('',#1063,#1064);+#1063 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#1064 = VECTOR('',#1065,1.);+#1065 = DIRECTION('',(1.,0.,0.));+#1066 = ORIENTED_EDGE('',*,*,#1067,.T.);+#1067 = EDGE_CURVE('',#1060,#1030,#1068,.T.);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(0.,1.,0.));+#1072 = ORIENTED_EDGE('',*,*,#1029,.F.);+#1073 = PLANE('',#1074);+#1074 = AXIS2_PLACEMENT_3D('',#1075,#1076,#1077);+#1075 = CARTESIAN_POINT('',(-2.2,1.625,0.445));+#1076 = DIRECTION('',(-0.,0.,1.));+#1077 = DIRECTION('',(1.,0.,0.));+#1078 = ADVANCED_FACE('',(#1079),#1097,.F.);+#1079 = FACE_BOUND('',#1080,.F.);+#1080 = EDGE_LOOP('',(#1081,#1089,#1090,#1091));+#1081 = ORIENTED_EDGE('',*,*,#1082,.T.);+#1082 = EDGE_CURVE('',#1083,#1052,#1085,.T.);+#1083 = VERTEX_POINT('',#1084);+#1084 = CARTESIAN_POINT('',(-2.4875,1.475,0.)); #1085 = LINE('',#1086,#1087);-#1086 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#1086 = CARTESIAN_POINT('',(-2.4875,1.475,0.)); #1087 = VECTOR('',#1088,1.);-#1088 = DIRECTION('',(1.,0.,0.));-#1089 = ORIENTED_EDGE('',*,*,#998,.T.);-#1090 = PLANE('',#1091);-#1091 = AXIS2_PLACEMENT_3D('',#1092,#1093,#1094);-#1092 = CARTESIAN_POINT('',(-2.634182274245,1.475,0.217942023204));-#1093 = DIRECTION('',(-0.,-1.,-0.));-#1094 = DIRECTION('',(0.,0.,-1.));-#1095 = ADVANCED_FACE('',(#1096),#1114,.F.);-#1096 = FACE_BOUND('',#1097,.F.);-#1097 = EDGE_LOOP('',(#1098,#1106,#1107,#1108));-#1098 = ORIENTED_EDGE('',*,*,#1099,.F.);-#1099 = EDGE_CURVE('',#1077,#1100,#1102,.T.);-#1100 = VERTEX_POINT('',#1101);-#1101 = CARTESIAN_POINT('',(-2.2,1.775,0.445));-#1102 = LINE('',#1103,#1104);-#1103 = CARTESIAN_POINT('',(-2.2,1.475,0.445));-#1104 = VECTOR('',#1105,1.);-#1105 = DIRECTION('',(0.,1.,0.));-#1106 = ORIENTED_EDGE('',*,*,#1084,.T.);-#1107 = ORIENTED_EDGE('',*,*,#988,.T.);-#1108 = ORIENTED_EDGE('',*,*,#1109,.F.);-#1109 = EDGE_CURVE('',#1100,#991,#1110,.T.);-#1110 = LINE('',#1111,#1112);-#1111 = CARTESIAN_POINT('',(-2.2,1.775,0.445));-#1112 = VECTOR('',#1113,1.);-#1113 = DIRECTION('',(1.,0.,0.));-#1114 = PLANE('',#1115);-#1115 = AXIS2_PLACEMENT_3D('',#1116,#1117,#1118);-#1116 = CARTESIAN_POINT('',(-2.2,1.625,0.445));-#1117 = DIRECTION('',(-0.,0.,1.));-#1118 = DIRECTION('',(1.,0.,0.));-#1119 = ADVANCED_FACE('',(#1120),#1138,.F.);-#1120 = FACE_BOUND('',#1121,.F.);-#1121 = EDGE_LOOP('',(#1122,#1123,#1131,#1137));-#1122 = ORIENTED_EDGE('',*,*,#1052,.T.);-#1123 = ORIENTED_EDGE('',*,*,#1124,.F.);-#1124 = EDGE_CURVE('',#1125,#1053,#1127,.T.);-#1125 = VERTEX_POINT('',#1126);-#1126 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#1127 = LINE('',#1128,#1129);-#1128 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#1129 = VECTOR('',#1130,1.);-#1130 = DIRECTION('',(0.,-1.,0.));-#1131 = ORIENTED_EDGE('',*,*,#1132,.F.);-#1132 = EDGE_CURVE('',#1028,#1125,#1133,.T.);+#1088 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1089 = ORIENTED_EDGE('',*,*,#1051,.T.);+#1090 = ORIENTED_EDGE('',*,*,#1021,.F.);+#1091 = ORIENTED_EDGE('',*,*,#1092,.T.);+#1092 = EDGE_CURVE('',#1014,#1083,#1093,.T.);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(0.,-1.,0.));+#1097 = PLANE('',#1098);+#1098 = AXIS2_PLACEMENT_3D('',#1099,#1100,#1101);+#1099 = CARTESIAN_POINT('',(-2.4875,1.625,0.));+#1100 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1101 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1102 = ADVANCED_FACE('',(#1103),#1121,.F.);+#1103 = FACE_BOUND('',#1104,.F.);+#1104 = EDGE_LOOP('',(#1105,#1113,#1114,#1115));+#1105 = ORIENTED_EDGE('',*,*,#1106,.T.);+#1106 = EDGE_CURVE('',#1107,#1083,#1109,.T.);+#1107 = VERTEX_POINT('',#1108);+#1108 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#1109 = LINE('',#1110,#1111);+#1110 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#1111 = VECTOR('',#1112,1.);+#1112 = DIRECTION('',(1.,0.,0.));+#1113 = ORIENTED_EDGE('',*,*,#1092,.F.);+#1114 = ORIENTED_EDGE('',*,*,#1013,.F.);+#1115 = ORIENTED_EDGE('',*,*,#1116,.T.);+#1116 = EDGE_CURVE('',#1006,#1107,#1117,.T.);+#1117 = LINE('',#1118,#1119);+#1118 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#1119 = VECTOR('',#1120,1.);+#1120 = DIRECTION('',(0.,-1.,0.));+#1121 = PLANE('',#1122);+#1122 = AXIS2_PLACEMENT_3D('',#1123,#1124,#1125);+#1123 = CARTESIAN_POINT('',(-3.205,1.625,0.));+#1124 = DIRECTION('',(-0.,0.,1.));+#1125 = DIRECTION('',(1.,0.,0.));+#1126 = ADVANCED_FACE('',(#1127),#1145,.F.);+#1127 = FACE_BOUND('',#1128,.F.);+#1128 = EDGE_LOOP('',(#1129,#1137,#1138,#1139));+#1129 = ORIENTED_EDGE('',*,*,#1130,.T.);+#1130 = EDGE_CURVE('',#1131,#1107,#1133,.T.);+#1131 = VERTEX_POINT('',#1132);+#1132 = CARTESIAN_POINT('',(-3.205,1.475,0.15)); #1133 = LINE('',#1134,#1135);-#1134 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#1134 = CARTESIAN_POINT('',(-3.205,1.475,0.15)); #1135 = VECTOR('',#1136,1.);-#1136 = DIRECTION('',(-1.,0.,0.));-#1137 = ORIENTED_EDGE('',*,*,#1027,.T.);-#1138 = PLANE('',#1139);-#1139 = AXIS2_PLACEMENT_3D('',#1140,#1141,#1142);-#1140 = CARTESIAN_POINT('',(-2.6375,1.625,0.15));-#1141 = DIRECTION('',(-0.,-0.,-1.));-#1142 = DIRECTION('',(-1.,0.,0.));-#1143 = ADVANCED_FACE('',(#1144),#1173,.F.);-#1144 = FACE_BOUND('',#1145,.F.);-#1145 = EDGE_LOOP('',(#1146,#1147,#1148,#1149,#1157,#1165,#1171,#1172));-#1146 = ORIENTED_EDGE('',*,*,#974,.T.);-#1147 = ORIENTED_EDGE('',*,*,#1035,.T.);-#1148 = ORIENTED_EDGE('',*,*,#1132,.T.);-#1149 = ORIENTED_EDGE('',*,*,#1150,.T.);-#1150 = EDGE_CURVE('',#1125,#1151,#1153,.T.);-#1151 = VERTEX_POINT('',#1152);-#1152 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#1153 = LINE('',#1154,#1155);-#1154 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#1155 = VECTOR('',#1156,1.);-#1156 = DIRECTION('',(0.,0.,-1.));-#1157 = ORIENTED_EDGE('',*,*,#1158,.T.);-#1158 = EDGE_CURVE('',#1151,#1159,#1161,.T.);-#1159 = VERTEX_POINT('',#1160);-#1160 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#1161 = LINE('',#1162,#1163);-#1162 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#1163 = VECTOR('',#1164,1.);-#1164 = DIRECTION('',(1.,0.,0.));-#1165 = ORIENTED_EDGE('',*,*,#1166,.T.);-#1166 = EDGE_CURVE('',#1159,#1100,#1167,.T.);-#1167 = LINE('',#1168,#1169);-#1168 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#1169 = VECTOR('',#1170,1.);-#1170 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1171 = ORIENTED_EDGE('',*,*,#1109,.T.);-#1172 = ORIENTED_EDGE('',*,*,#1005,.T.);-#1173 = PLANE('',#1174);-#1174 = AXIS2_PLACEMENT_3D('',#1175,#1176,#1177);-#1175 = CARTESIAN_POINT('',(-2.634182274245,1.775,0.217942023204));-#1176 = DIRECTION('',(-0.,-1.,-0.));-#1177 = DIRECTION('',(0.,0.,-1.));-#1178 = ADVANCED_FACE('',(#1179),#1190,.F.);-#1179 = FACE_BOUND('',#1180,.F.);-#1180 = EDGE_LOOP('',(#1181,#1182,#1188,#1189));-#1181 = ORIENTED_EDGE('',*,*,#1060,.T.);-#1182 = ORIENTED_EDGE('',*,*,#1183,.F.);-#1183 = EDGE_CURVE('',#1151,#1061,#1184,.T.);-#1184 = LINE('',#1185,#1186);-#1185 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#1186 = VECTOR('',#1187,1.);-#1187 = DIRECTION('',(0.,-1.,0.));-#1188 = ORIENTED_EDGE('',*,*,#1150,.F.);-#1189 = ORIENTED_EDGE('',*,*,#1124,.T.);-#1190 = PLANE('',#1191);-#1191 = AXIS2_PLACEMENT_3D('',#1192,#1193,#1194);-#1192 = CARTESIAN_POINT('',(-3.205,1.625,0.15));-#1193 = DIRECTION('',(1.,0.,0.));-#1194 = DIRECTION('',(0.,0.,-1.));-#1195 = ADVANCED_FACE('',(#1196),#1207,.F.);-#1196 = FACE_BOUND('',#1197,.F.);-#1197 = EDGE_LOOP('',(#1198,#1199,#1205,#1206));-#1198 = ORIENTED_EDGE('',*,*,#1068,.T.);-#1199 = ORIENTED_EDGE('',*,*,#1200,.F.);-#1200 = EDGE_CURVE('',#1159,#1069,#1201,.T.);-#1201 = LINE('',#1202,#1203);-#1202 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#1203 = VECTOR('',#1204,1.);-#1204 = DIRECTION('',(0.,-1.,0.));-#1205 = ORIENTED_EDGE('',*,*,#1158,.F.);-#1206 = ORIENTED_EDGE('',*,*,#1183,.T.);+#1136 = DIRECTION('',(0.,0.,-1.));+#1137 = ORIENTED_EDGE('',*,*,#1116,.F.);+#1138 = ORIENTED_EDGE('',*,*,#1005,.F.);+#1139 = ORIENTED_EDGE('',*,*,#1140,.T.);+#1140 = EDGE_CURVE('',#998,#1131,#1141,.T.);+#1141 = LINE('',#1142,#1143);+#1142 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#1143 = VECTOR('',#1144,1.);+#1144 = DIRECTION('',(0.,-1.,0.));+#1145 = PLANE('',#1146);+#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);+#1147 = CARTESIAN_POINT('',(-3.205,1.625,0.15));+#1148 = DIRECTION('',(1.,0.,0.));+#1149 = DIRECTION('',(0.,0.,-1.));+#1150 = ADVANCED_FACE('',(#1151),#1169,.F.);+#1151 = FACE_BOUND('',#1152,.F.);+#1152 = EDGE_LOOP('',(#1153,#1161,#1162,#1163));+#1153 = ORIENTED_EDGE('',*,*,#1154,.T.);+#1154 = EDGE_CURVE('',#1155,#1131,#1157,.T.);+#1155 = VERTEX_POINT('',#1156);+#1156 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#1157 = LINE('',#1158,#1159);+#1158 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#1159 = VECTOR('',#1160,1.);+#1160 = DIRECTION('',(-1.,0.,0.));+#1161 = ORIENTED_EDGE('',*,*,#1140,.F.);+#1162 = ORIENTED_EDGE('',*,*,#997,.F.);+#1163 = ORIENTED_EDGE('',*,*,#1164,.T.);+#1164 = EDGE_CURVE('',#990,#1155,#1165,.T.);+#1165 = LINE('',#1166,#1167);+#1166 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#1167 = VECTOR('',#1168,1.);+#1168 = DIRECTION('',(0.,-1.,0.));+#1169 = PLANE('',#1170);+#1170 = AXIS2_PLACEMENT_3D('',#1171,#1172,#1173);+#1171 = CARTESIAN_POINT('',(-2.6375,1.625,0.15));+#1172 = DIRECTION('',(-0.,-0.,-1.));+#1173 = DIRECTION('',(-1.,0.,0.));+#1174 = ADVANCED_FACE('',(#1175),#1186,.F.);+#1175 = FACE_BOUND('',#1176,.F.);+#1176 = EDGE_LOOP('',(#1177,#1183,#1184,#1185));+#1177 = ORIENTED_EDGE('',*,*,#1178,.T.);+#1178 = EDGE_CURVE('',#959,#1155,#1179,.T.);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(-2.35,1.475,0.595));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1183 = ORIENTED_EDGE('',*,*,#1164,.F.);+#1184 = ORIENTED_EDGE('',*,*,#989,.F.);+#1185 = ORIENTED_EDGE('',*,*,#966,.T.);+#1186 = PLANE('',#1187);+#1187 = AXIS2_PLACEMENT_3D('',#1188,#1189,#1190);+#1188 = CARTESIAN_POINT('',(-2.35,1.625,0.595));+#1189 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#1190 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1191 = ADVANCED_FACE('',(#1192),#1207,.T.);+#1192 = FACE_BOUND('',#1193,.T.);+#1193 = EDGE_LOOP('',(#1194,#1195,#1196,#1197,#1198,#1199,#1200,#1201));+#1194 = ORIENTED_EDGE('',*,*,#958,.T.);+#1195 = ORIENTED_EDGE('',*,*,#1178,.T.);+#1196 = ORIENTED_EDGE('',*,*,#1154,.T.);+#1197 = ORIENTED_EDGE('',*,*,#1130,.T.);+#1198 = ORIENTED_EDGE('',*,*,#1106,.T.);+#1199 = ORIENTED_EDGE('',*,*,#1082,.T.);+#1200 = ORIENTED_EDGE('',*,*,#1059,.T.);+#1201 = ORIENTED_EDGE('',*,*,#1202,.T.);+#1202 = EDGE_CURVE('',#1060,#949,#1203,.T.);+#1203 = LINE('',#1204,#1205);+#1204 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#1205 = VECTOR('',#1206,1.);+#1206 = DIRECTION('',(0.,0.,1.)); #1207 = PLANE('',#1208); #1208 = AXIS2_PLACEMENT_3D('',#1209,#1210,#1211);-#1209 = CARTESIAN_POINT('',(-3.205,1.625,0.));-#1210 = DIRECTION('',(-0.,0.,1.));-#1211 = DIRECTION('',(1.,0.,0.));+#1209 = CARTESIAN_POINT('',(-2.634182274245,1.475,0.217942023204));+#1210 = DIRECTION('',(-0.,-1.,-0.));+#1211 = DIRECTION('',(0.,0.,-1.)); #1212 = ADVANCED_FACE('',(#1213),#1219,.F.); #1213 = FACE_BOUND('',#1214,.F.); #1214 = EDGE_LOOP('',(#1215,#1216,#1217,#1218));-#1215 = ORIENTED_EDGE('',*,*,#1076,.T.);-#1216 = ORIENTED_EDGE('',*,*,#1099,.T.);-#1217 = ORIENTED_EDGE('',*,*,#1166,.F.);-#1218 = ORIENTED_EDGE('',*,*,#1200,.T.);+#1215 = ORIENTED_EDGE('',*,*,#1067,.F.);+#1216 = ORIENTED_EDGE('',*,*,#1202,.T.);+#1217 = ORIENTED_EDGE('',*,*,#948,.T.);+#1218 = ORIENTED_EDGE('',*,*,#1037,.F.); #1219 = PLANE('',#1220); #1220 = AXIS2_PLACEMENT_3D('',#1221,#1222,#1223);-#1221 = CARTESIAN_POINT('',(-2.4875,1.625,0.));-#1222 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#1223 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1221 = CARTESIAN_POINT('',(-2.15,1.625,0.445));+#1222 = DIRECTION('',(-1.,0.,0.));+#1223 = DIRECTION('',(0.,0.,1.)); #1224 = MANIFOLD_SOLID_BREP('',#1225);-#1225 = CLOSED_SHELL('',(#1226,#1266,#1297,#1328,#1377,#1401,#1425,#1460- ,#1477,#1494));+#1225 = CLOSED_SHELL('',(#1226,#1266,#1329,#1360,#1384,#1408,#1432,#1456+ ,#1473,#1494)); #1226 = ADVANCED_FACE('',(#1227),#1261,.F.); #1227 = FACE_BOUND('',#1228,.F.); #1228 = EDGE_LOOP('',(#1229,#1239,#1247,#1255));@@ -1301,249 +1301,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #1263 = CARTESIAN_POINT('',(-2.15,0.975,0.595)); #1264 = DIRECTION('',(-0.,-0.,-1.)); #1265 = DIRECTION('',(-1.,0.,0.));-#1266 = ADVANCED_FACE('',(#1267),#1292,.F.);+#1266 = ADVANCED_FACE('',(#1267),#1324,.F.); #1267 = FACE_BOUND('',#1268,.F.);-#1268 = EDGE_LOOP('',(#1269,#1279,#1285,#1286));-#1269 = ORIENTED_EDGE('',*,*,#1270,.F.);-#1270 = EDGE_CURVE('',#1271,#1273,#1275,.T.);-#1271 = VERTEX_POINT('',#1272);-#1272 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#1273 = VERTEX_POINT('',#1274);-#1274 = CARTESIAN_POINT('',(-2.15,1.125,0.445));-#1275 = LINE('',#1276,#1277);-#1276 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#1277 = VECTOR('',#1278,1.);-#1278 = DIRECTION('',(0.,1.,0.));-#1279 = ORIENTED_EDGE('',*,*,#1280,.T.);-#1280 = EDGE_CURVE('',#1271,#1231,#1281,.T.);-#1281 = LINE('',#1282,#1283);-#1282 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#1283 = VECTOR('',#1284,1.);-#1284 = DIRECTION('',(0.,0.,1.));-#1285 = ORIENTED_EDGE('',*,*,#1230,.T.);-#1286 = ORIENTED_EDGE('',*,*,#1287,.F.);-#1287 = EDGE_CURVE('',#1273,#1233,#1288,.T.);-#1288 = LINE('',#1289,#1290);-#1289 = CARTESIAN_POINT('',(-2.15,1.125,0.445));-#1290 = VECTOR('',#1291,1.);-#1291 = DIRECTION('',(0.,0.,1.));-#1292 = PLANE('',#1293);-#1293 = AXIS2_PLACEMENT_3D('',#1294,#1295,#1296);-#1294 = CARTESIAN_POINT('',(-2.15,0.975,0.445));-#1295 = DIRECTION('',(-1.,0.,0.));-#1296 = DIRECTION('',(0.,0.,1.));-#1297 = ADVANCED_FACE('',(#1298),#1323,.F.);-#1298 = FACE_BOUND('',#1299,.F.);-#1299 = EDGE_LOOP('',(#1300,#1308,#1316,#1322));-#1300 = ORIENTED_EDGE('',*,*,#1301,.T.);-#1301 = EDGE_CURVE('',#1241,#1302,#1304,.T.);-#1302 = VERTEX_POINT('',#1303);-#1303 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));-#1304 = LINE('',#1305,#1306);-#1305 = CARTESIAN_POINT('',(-2.35,0.825,0.595));-#1306 = VECTOR('',#1307,1.);-#1307 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1308 = ORIENTED_EDGE('',*,*,#1309,.F.);-#1309 = EDGE_CURVE('',#1310,#1302,#1312,.T.);-#1310 = VERTEX_POINT('',#1311);-#1311 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));-#1312 = LINE('',#1313,#1314);-#1313 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));-#1314 = VECTOR('',#1315,1.);-#1315 = DIRECTION('',(0.,-1.,0.));-#1316 = ORIENTED_EDGE('',*,*,#1317,.F.);-#1317 = EDGE_CURVE('',#1249,#1310,#1318,.T.);-#1318 = LINE('',#1319,#1320);-#1319 = CARTESIAN_POINT('',(-2.35,1.125,0.595));-#1320 = VECTOR('',#1321,1.);-#1321 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1322 = ORIENTED_EDGE('',*,*,#1248,.T.);-#1323 = PLANE('',#1324);-#1324 = AXIS2_PLACEMENT_3D('',#1325,#1326,#1327);-#1325 = CARTESIAN_POINT('',(-2.35,0.975,0.595));-#1326 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#1327 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1328 = ADVANCED_FACE('',(#1329),#1372,.T.);-#1329 = FACE_BOUND('',#1330,.T.);-#1330 = EDGE_LOOP('',(#1331,#1332,#1333,#1341,#1349,#1357,#1365,#1371));-#1331 = ORIENTED_EDGE('',*,*,#1240,.T.);-#1332 = ORIENTED_EDGE('',*,*,#1301,.T.);-#1333 = ORIENTED_EDGE('',*,*,#1334,.T.);-#1334 = EDGE_CURVE('',#1302,#1335,#1337,.T.);-#1335 = VERTEX_POINT('',#1336);-#1336 = CARTESIAN_POINT('',(-3.205,0.825,0.15));-#1337 = LINE('',#1338,#1339);-#1338 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));-#1339 = VECTOR('',#1340,1.);-#1340 = DIRECTION('',(-1.,0.,0.));-#1341 = ORIENTED_EDGE('',*,*,#1342,.T.);-#1342 = EDGE_CURVE('',#1335,#1343,#1345,.T.);-#1343 = VERTEX_POINT('',#1344);-#1344 = CARTESIAN_POINT('',(-3.205,0.825,0.));-#1345 = LINE('',#1346,#1347);-#1346 = CARTESIAN_POINT('',(-3.205,0.825,0.15));-#1347 = VECTOR('',#1348,1.);-#1348 = DIRECTION('',(0.,0.,-1.));-#1349 = ORIENTED_EDGE('',*,*,#1350,.T.);-#1350 = EDGE_CURVE('',#1343,#1351,#1353,.T.);-#1351 = VERTEX_POINT('',#1352);-#1352 = CARTESIAN_POINT('',(-2.4875,0.825,0.));-#1353 = LINE('',#1354,#1355);-#1354 = CARTESIAN_POINT('',(-3.205,0.825,0.));-#1355 = VECTOR('',#1356,1.);-#1356 = DIRECTION('',(1.,0.,0.));-#1357 = ORIENTED_EDGE('',*,*,#1358,.T.);-#1358 = EDGE_CURVE('',#1351,#1359,#1361,.T.);-#1359 = VERTEX_POINT('',#1360);-#1360 = CARTESIAN_POINT('',(-2.2,0.825,0.445));-#1361 = LINE('',#1362,#1363);-#1362 = CARTESIAN_POINT('',(-2.4875,0.825,0.));-#1363 = VECTOR('',#1364,1.);-#1364 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1365 = ORIENTED_EDGE('',*,*,#1366,.T.);-#1366 = EDGE_CURVE('',#1359,#1271,#1367,.T.);+#1268 = EDGE_LOOP('',(#1269,#1270,#1278,#1286,#1294,#1302,#1310,#1318));+#1269 = ORIENTED_EDGE('',*,*,#1256,.T.);+#1270 = ORIENTED_EDGE('',*,*,#1271,.T.);+#1271 = EDGE_CURVE('',#1249,#1272,#1274,.T.);+#1272 = VERTEX_POINT('',#1273);+#1273 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#1274 = LINE('',#1275,#1276);+#1275 = CARTESIAN_POINT('',(-2.35,1.125,0.595));+#1276 = VECTOR('',#1277,1.);+#1277 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1278 = ORIENTED_EDGE('',*,*,#1279,.T.);+#1279 = EDGE_CURVE('',#1272,#1280,#1282,.T.);+#1280 = VERTEX_POINT('',#1281);+#1281 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#1282 = LINE('',#1283,#1284);+#1283 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#1284 = VECTOR('',#1285,1.);+#1285 = DIRECTION('',(-1.,0.,0.));+#1286 = ORIENTED_EDGE('',*,*,#1287,.T.);+#1287 = EDGE_CURVE('',#1280,#1288,#1290,.T.);+#1288 = VERTEX_POINT('',#1289);+#1289 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#1290 = LINE('',#1291,#1292);+#1291 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#1292 = VECTOR('',#1293,1.);+#1293 = DIRECTION('',(0.,0.,-1.));+#1294 = ORIENTED_EDGE('',*,*,#1295,.T.);+#1295 = EDGE_CURVE('',#1288,#1296,#1298,.T.);+#1296 = VERTEX_POINT('',#1297);+#1297 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#1298 = LINE('',#1299,#1300);+#1299 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#1300 = VECTOR('',#1301,1.);+#1301 = DIRECTION('',(1.,0.,0.));+#1302 = ORIENTED_EDGE('',*,*,#1303,.T.);+#1303 = EDGE_CURVE('',#1296,#1304,#1306,.T.);+#1304 = VERTEX_POINT('',#1305);+#1305 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#1306 = LINE('',#1307,#1308);+#1307 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#1308 = VECTOR('',#1309,1.);+#1309 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1310 = ORIENTED_EDGE('',*,*,#1311,.T.);+#1311 = EDGE_CURVE('',#1304,#1312,#1314,.T.);+#1312 = VERTEX_POINT('',#1313);+#1313 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#1314 = LINE('',#1315,#1316);+#1315 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#1316 = VECTOR('',#1317,1.);+#1317 = DIRECTION('',(1.,0.,0.));+#1318 = ORIENTED_EDGE('',*,*,#1319,.T.);+#1319 = EDGE_CURVE('',#1312,#1233,#1320,.T.);+#1320 = LINE('',#1321,#1322);+#1321 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#1322 = VECTOR('',#1323,1.);+#1323 = DIRECTION('',(0.,0.,1.));+#1324 = PLANE('',#1325);+#1325 = AXIS2_PLACEMENT_3D('',#1326,#1327,#1328);+#1326 = CARTESIAN_POINT('',(-2.634182274245,1.125,0.217942023204));+#1327 = DIRECTION('',(-0.,-1.,-0.));+#1328 = DIRECTION('',(0.,0.,-1.));+#1329 = ADVANCED_FACE('',(#1330),#1355,.F.);+#1330 = FACE_BOUND('',#1331,.F.);+#1331 = EDGE_LOOP('',(#1332,#1340,#1348,#1354));+#1332 = ORIENTED_EDGE('',*,*,#1333,.F.);+#1333 = EDGE_CURVE('',#1334,#1304,#1336,.T.);+#1334 = VERTEX_POINT('',#1335);+#1335 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(0.,1.,0.));+#1340 = ORIENTED_EDGE('',*,*,#1341,.T.);+#1341 = EDGE_CURVE('',#1334,#1342,#1344,.T.);+#1342 = VERTEX_POINT('',#1343);+#1343 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#1344 = LINE('',#1345,#1346);+#1345 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#1346 = VECTOR('',#1347,1.);+#1347 = DIRECTION('',(1.,0.,0.));+#1348 = ORIENTED_EDGE('',*,*,#1349,.T.);+#1349 = EDGE_CURVE('',#1342,#1312,#1350,.T.);+#1350 = LINE('',#1351,#1352);+#1351 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#1352 = VECTOR('',#1353,1.);+#1353 = DIRECTION('',(0.,1.,0.));+#1354 = ORIENTED_EDGE('',*,*,#1311,.F.);+#1355 = PLANE('',#1356);+#1356 = AXIS2_PLACEMENT_3D('',#1357,#1358,#1359);+#1357 = CARTESIAN_POINT('',(-2.2,0.975,0.445));+#1358 = DIRECTION('',(-0.,0.,1.));+#1359 = DIRECTION('',(1.,0.,0.));+#1360 = ADVANCED_FACE('',(#1361),#1379,.F.);+#1361 = FACE_BOUND('',#1362,.F.);+#1362 = EDGE_LOOP('',(#1363,#1371,#1372,#1373));+#1363 = ORIENTED_EDGE('',*,*,#1364,.T.);+#1364 = EDGE_CURVE('',#1365,#1334,#1367,.T.);+#1365 = VERTEX_POINT('',#1366);+#1366 = CARTESIAN_POINT('',(-2.4875,0.825,0.)); #1367 = LINE('',#1368,#1369);-#1368 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#1368 = CARTESIAN_POINT('',(-2.4875,0.825,0.)); #1369 = VECTOR('',#1370,1.);-#1370 = DIRECTION('',(1.,0.,0.));-#1371 = ORIENTED_EDGE('',*,*,#1280,.T.);-#1372 = PLANE('',#1373);-#1373 = AXIS2_PLACEMENT_3D('',#1374,#1375,#1376);-#1374 = CARTESIAN_POINT('',(-2.634182274245,0.825,0.217942023204));-#1375 = DIRECTION('',(-0.,-1.,-0.));-#1376 = DIRECTION('',(0.,0.,-1.));-#1377 = ADVANCED_FACE('',(#1378),#1396,.F.);-#1378 = FACE_BOUND('',#1379,.F.);-#1379 = EDGE_LOOP('',(#1380,#1388,#1389,#1390));-#1380 = ORIENTED_EDGE('',*,*,#1381,.F.);-#1381 = EDGE_CURVE('',#1359,#1382,#1384,.T.);-#1382 = VERTEX_POINT('',#1383);-#1383 = CARTESIAN_POINT('',(-2.2,1.125,0.445));-#1384 = LINE('',#1385,#1386);-#1385 = CARTESIAN_POINT('',(-2.2,0.825,0.445));-#1386 = VECTOR('',#1387,1.);-#1387 = DIRECTION('',(0.,1.,0.));-#1388 = ORIENTED_EDGE('',*,*,#1366,.T.);-#1389 = ORIENTED_EDGE('',*,*,#1270,.T.);-#1390 = ORIENTED_EDGE('',*,*,#1391,.F.);-#1391 = EDGE_CURVE('',#1382,#1273,#1392,.T.);-#1392 = LINE('',#1393,#1394);-#1393 = CARTESIAN_POINT('',(-2.2,1.125,0.445));-#1394 = VECTOR('',#1395,1.);-#1395 = DIRECTION('',(1.,0.,0.));-#1396 = PLANE('',#1397);-#1397 = AXIS2_PLACEMENT_3D('',#1398,#1399,#1400);-#1398 = CARTESIAN_POINT('',(-2.2,0.975,0.445));-#1399 = DIRECTION('',(-0.,0.,1.));-#1400 = DIRECTION('',(1.,0.,0.));-#1401 = ADVANCED_FACE('',(#1402),#1420,.F.);-#1402 = FACE_BOUND('',#1403,.F.);-#1403 = EDGE_LOOP('',(#1404,#1405,#1413,#1419));-#1404 = ORIENTED_EDGE('',*,*,#1334,.T.);-#1405 = ORIENTED_EDGE('',*,*,#1406,.F.);-#1406 = EDGE_CURVE('',#1407,#1335,#1409,.T.);-#1407 = VERTEX_POINT('',#1408);-#1408 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#1409 = LINE('',#1410,#1411);-#1410 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#1411 = VECTOR('',#1412,1.);-#1412 = DIRECTION('',(0.,-1.,0.));-#1413 = ORIENTED_EDGE('',*,*,#1414,.F.);-#1414 = EDGE_CURVE('',#1310,#1407,#1415,.T.);+#1370 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1371 = ORIENTED_EDGE('',*,*,#1333,.T.);+#1372 = ORIENTED_EDGE('',*,*,#1303,.F.);+#1373 = ORIENTED_EDGE('',*,*,#1374,.T.);+#1374 = EDGE_CURVE('',#1296,#1365,#1375,.T.);+#1375 = LINE('',#1376,#1377);+#1376 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#1377 = VECTOR('',#1378,1.);+#1378 = DIRECTION('',(0.,-1.,0.));+#1379 = PLANE('',#1380);+#1380 = AXIS2_PLACEMENT_3D('',#1381,#1382,#1383);+#1381 = CARTESIAN_POINT('',(-2.4875,0.975,0.));+#1382 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1383 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1384 = ADVANCED_FACE('',(#1385),#1403,.F.);+#1385 = FACE_BOUND('',#1386,.F.);+#1386 = EDGE_LOOP('',(#1387,#1395,#1396,#1397));+#1387 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1388 = EDGE_CURVE('',#1389,#1365,#1391,.T.);+#1389 = VERTEX_POINT('',#1390);+#1390 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#1391 = LINE('',#1392,#1393);+#1392 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#1393 = VECTOR('',#1394,1.);+#1394 = DIRECTION('',(1.,0.,0.));+#1395 = ORIENTED_EDGE('',*,*,#1374,.F.);+#1396 = ORIENTED_EDGE('',*,*,#1295,.F.);+#1397 = ORIENTED_EDGE('',*,*,#1398,.T.);+#1398 = EDGE_CURVE('',#1288,#1389,#1399,.T.);+#1399 = LINE('',#1400,#1401);+#1400 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#1401 = VECTOR('',#1402,1.);+#1402 = DIRECTION('',(0.,-1.,0.));+#1403 = PLANE('',#1404);+#1404 = AXIS2_PLACEMENT_3D('',#1405,#1406,#1407);+#1405 = CARTESIAN_POINT('',(-3.205,0.975,0.));+#1406 = DIRECTION('',(-0.,0.,1.));+#1407 = DIRECTION('',(1.,0.,0.));+#1408 = ADVANCED_FACE('',(#1409),#1427,.F.);+#1409 = FACE_BOUND('',#1410,.F.);+#1410 = EDGE_LOOP('',(#1411,#1419,#1420,#1421));+#1411 = ORIENTED_EDGE('',*,*,#1412,.T.);+#1412 = EDGE_CURVE('',#1413,#1389,#1415,.T.);+#1413 = VERTEX_POINT('',#1414);+#1414 = CARTESIAN_POINT('',(-3.205,0.825,0.15)); #1415 = LINE('',#1416,#1417);-#1416 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#1416 = CARTESIAN_POINT('',(-3.205,0.825,0.15)); #1417 = VECTOR('',#1418,1.);-#1418 = DIRECTION('',(-1.,0.,0.));-#1419 = ORIENTED_EDGE('',*,*,#1309,.T.);-#1420 = PLANE('',#1421);-#1421 = AXIS2_PLACEMENT_3D('',#1422,#1423,#1424);-#1422 = CARTESIAN_POINT('',(-2.6375,0.975,0.15));-#1423 = DIRECTION('',(-0.,-0.,-1.));-#1424 = DIRECTION('',(-1.,0.,0.));-#1425 = ADVANCED_FACE('',(#1426),#1455,.F.);-#1426 = FACE_BOUND('',#1427,.F.);-#1427 = EDGE_LOOP('',(#1428,#1429,#1430,#1431,#1439,#1447,#1453,#1454));-#1428 = ORIENTED_EDGE('',*,*,#1256,.T.);-#1429 = ORIENTED_EDGE('',*,*,#1317,.T.);-#1430 = ORIENTED_EDGE('',*,*,#1414,.T.);-#1431 = ORIENTED_EDGE('',*,*,#1432,.T.);-#1432 = EDGE_CURVE('',#1407,#1433,#1435,.T.);-#1433 = VERTEX_POINT('',#1434);-#1434 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#1435 = LINE('',#1436,#1437);-#1436 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#1437 = VECTOR('',#1438,1.);-#1438 = DIRECTION('',(0.,0.,-1.));-#1439 = ORIENTED_EDGE('',*,*,#1440,.T.);-#1440 = EDGE_CURVE('',#1433,#1441,#1443,.T.);-#1441 = VERTEX_POINT('',#1442);-#1442 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#1443 = LINE('',#1444,#1445);-#1444 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#1445 = VECTOR('',#1446,1.);-#1446 = DIRECTION('',(1.,0.,0.));-#1447 = ORIENTED_EDGE('',*,*,#1448,.T.);-#1448 = EDGE_CURVE('',#1441,#1382,#1449,.T.);-#1449 = LINE('',#1450,#1451);-#1450 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#1451 = VECTOR('',#1452,1.);-#1452 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1453 = ORIENTED_EDGE('',*,*,#1391,.T.);-#1454 = ORIENTED_EDGE('',*,*,#1287,.T.);-#1455 = PLANE('',#1456);-#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);-#1457 = CARTESIAN_POINT('',(-2.634182274245,1.125,0.217942023204));-#1458 = DIRECTION('',(-0.,-1.,-0.));-#1459 = DIRECTION('',(0.,0.,-1.));-#1460 = ADVANCED_FACE('',(#1461),#1472,.F.);-#1461 = FACE_BOUND('',#1462,.F.);-#1462 = EDGE_LOOP('',(#1463,#1464,#1470,#1471));-#1463 = ORIENTED_EDGE('',*,*,#1342,.T.);-#1464 = ORIENTED_EDGE('',*,*,#1465,.F.);-#1465 = EDGE_CURVE('',#1433,#1343,#1466,.T.);-#1466 = LINE('',#1467,#1468);-#1467 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#1468 = VECTOR('',#1469,1.);-#1469 = DIRECTION('',(0.,-1.,0.));-#1470 = ORIENTED_EDGE('',*,*,#1432,.F.);-#1471 = ORIENTED_EDGE('',*,*,#1406,.T.);-#1472 = PLANE('',#1473);-#1473 = AXIS2_PLACEMENT_3D('',#1474,#1475,#1476);-#1474 = CARTESIAN_POINT('',(-3.205,0.975,0.15));-#1475 = DIRECTION('',(1.,0.,0.));-#1476 = DIRECTION('',(0.,0.,-1.));-#1477 = ADVANCED_FACE('',(#1478),#1489,.F.);-#1478 = FACE_BOUND('',#1479,.F.);-#1479 = EDGE_LOOP('',(#1480,#1481,#1487,#1488));-#1480 = ORIENTED_EDGE('',*,*,#1350,.T.);-#1481 = ORIENTED_EDGE('',*,*,#1482,.F.);-#1482 = EDGE_CURVE('',#1441,#1351,#1483,.T.);-#1483 = LINE('',#1484,#1485);-#1484 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#1485 = VECTOR('',#1486,1.);-#1486 = DIRECTION('',(0.,-1.,0.));-#1487 = ORIENTED_EDGE('',*,*,#1440,.F.);-#1488 = ORIENTED_EDGE('',*,*,#1465,.T.);+#1418 = DIRECTION('',(0.,0.,-1.));+#1419 = ORIENTED_EDGE('',*,*,#1398,.F.);+#1420 = ORIENTED_EDGE('',*,*,#1287,.F.);+#1421 = ORIENTED_EDGE('',*,*,#1422,.T.);+#1422 = EDGE_CURVE('',#1280,#1413,#1423,.T.);+#1423 = LINE('',#1424,#1425);+#1424 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#1425 = VECTOR('',#1426,1.);+#1426 = DIRECTION('',(0.,-1.,0.));+#1427 = PLANE('',#1428);+#1428 = AXIS2_PLACEMENT_3D('',#1429,#1430,#1431);+#1429 = CARTESIAN_POINT('',(-3.205,0.975,0.15));+#1430 = DIRECTION('',(1.,0.,0.));+#1431 = DIRECTION('',(0.,0.,-1.));+#1432 = ADVANCED_FACE('',(#1433),#1451,.F.);+#1433 = FACE_BOUND('',#1434,.F.);+#1434 = EDGE_LOOP('',(#1435,#1443,#1444,#1445));+#1435 = ORIENTED_EDGE('',*,*,#1436,.T.);+#1436 = EDGE_CURVE('',#1437,#1413,#1439,.T.);+#1437 = VERTEX_POINT('',#1438);+#1438 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#1439 = LINE('',#1440,#1441);+#1440 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#1441 = VECTOR('',#1442,1.);+#1442 = DIRECTION('',(-1.,0.,0.));+#1443 = ORIENTED_EDGE('',*,*,#1422,.F.);+#1444 = ORIENTED_EDGE('',*,*,#1279,.F.);+#1445 = ORIENTED_EDGE('',*,*,#1446,.T.);+#1446 = EDGE_CURVE('',#1272,#1437,#1447,.T.);+#1447 = LINE('',#1448,#1449);+#1448 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#1449 = VECTOR('',#1450,1.);+#1450 = DIRECTION('',(0.,-1.,0.));+#1451 = PLANE('',#1452);+#1452 = AXIS2_PLACEMENT_3D('',#1453,#1454,#1455);+#1453 = CARTESIAN_POINT('',(-2.6375,0.975,0.15));+#1454 = DIRECTION('',(-0.,-0.,-1.));+#1455 = DIRECTION('',(-1.,0.,0.));+#1456 = ADVANCED_FACE('',(#1457),#1468,.F.);+#1457 = FACE_BOUND('',#1458,.F.);+#1458 = EDGE_LOOP('',(#1459,#1465,#1466,#1467));+#1459 = ORIENTED_EDGE('',*,*,#1460,.T.);+#1460 = EDGE_CURVE('',#1241,#1437,#1461,.T.);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(-2.35,0.825,0.595));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1465 = ORIENTED_EDGE('',*,*,#1446,.F.);+#1466 = ORIENTED_EDGE('',*,*,#1271,.F.);+#1467 = ORIENTED_EDGE('',*,*,#1248,.T.);+#1468 = PLANE('',#1469);+#1469 = AXIS2_PLACEMENT_3D('',#1470,#1471,#1472);+#1470 = CARTESIAN_POINT('',(-2.35,0.975,0.595));+#1471 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#1472 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1473 = ADVANCED_FACE('',(#1474),#1489,.T.);+#1474 = FACE_BOUND('',#1475,.T.);+#1475 = EDGE_LOOP('',(#1476,#1477,#1478,#1479,#1480,#1481,#1482,#1483));+#1476 = ORIENTED_EDGE('',*,*,#1240,.T.);+#1477 = ORIENTED_EDGE('',*,*,#1460,.T.);+#1478 = ORIENTED_EDGE('',*,*,#1436,.T.);+#1479 = ORIENTED_EDGE('',*,*,#1412,.T.);+#1480 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1481 = ORIENTED_EDGE('',*,*,#1364,.T.);+#1482 = ORIENTED_EDGE('',*,*,#1341,.T.);+#1483 = ORIENTED_EDGE('',*,*,#1484,.T.);+#1484 = EDGE_CURVE('',#1342,#1231,#1485,.T.);+#1485 = LINE('',#1486,#1487);+#1486 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#1487 = VECTOR('',#1488,1.);+#1488 = DIRECTION('',(0.,0.,1.)); #1489 = PLANE('',#1490); #1490 = AXIS2_PLACEMENT_3D('',#1491,#1492,#1493);-#1491 = CARTESIAN_POINT('',(-3.205,0.975,0.));-#1492 = DIRECTION('',(-0.,0.,1.));-#1493 = DIRECTION('',(1.,0.,0.));+#1491 = CARTESIAN_POINT('',(-2.634182274245,0.825,0.217942023204));+#1492 = DIRECTION('',(-0.,-1.,-0.));+#1493 = DIRECTION('',(0.,0.,-1.)); #1494 = ADVANCED_FACE('',(#1495),#1501,.F.); #1495 = FACE_BOUND('',#1496,.F.); #1496 = EDGE_LOOP('',(#1497,#1498,#1499,#1500));-#1497 = ORIENTED_EDGE('',*,*,#1358,.T.);-#1498 = ORIENTED_EDGE('',*,*,#1381,.T.);-#1499 = ORIENTED_EDGE('',*,*,#1448,.F.);-#1500 = ORIENTED_EDGE('',*,*,#1482,.T.);+#1497 = ORIENTED_EDGE('',*,*,#1349,.F.);+#1498 = ORIENTED_EDGE('',*,*,#1484,.T.);+#1499 = ORIENTED_EDGE('',*,*,#1230,.T.);+#1500 = ORIENTED_EDGE('',*,*,#1319,.F.); #1501 = PLANE('',#1502); #1502 = AXIS2_PLACEMENT_3D('',#1503,#1504,#1505);-#1503 = CARTESIAN_POINT('',(-2.4875,0.975,0.));-#1504 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#1505 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1503 = CARTESIAN_POINT('',(-2.15,0.975,0.445));+#1504 = DIRECTION('',(-1.,0.,0.));+#1505 = DIRECTION('',(0.,0.,1.)); #1506 = MANIFOLD_SOLID_BREP('',#1507);-#1507 = CLOSED_SHELL('',(#1508,#1548,#1579,#1610,#1659,#1683,#1707,#1742- ,#1759,#1776));+#1507 = CLOSED_SHELL('',(#1508,#1548,#1611,#1642,#1666,#1690,#1714,#1738+ ,#1755,#1776)); #1508 = ADVANCED_FACE('',(#1509),#1543,.F.); #1509 = FACE_BOUND('',#1510,.F.); #1510 = EDGE_LOOP('',(#1511,#1521,#1529,#1537));@@ -1584,249 +1584,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #1545 = CARTESIAN_POINT('',(-2.15,0.325,0.595)); #1546 = DIRECTION('',(-0.,-0.,-1.)); #1547 = DIRECTION('',(-1.,0.,0.));-#1548 = ADVANCED_FACE('',(#1549),#1574,.F.);+#1548 = ADVANCED_FACE('',(#1549),#1606,.F.); #1549 = FACE_BOUND('',#1550,.F.);-#1550 = EDGE_LOOP('',(#1551,#1561,#1567,#1568));-#1551 = ORIENTED_EDGE('',*,*,#1552,.F.);-#1552 = EDGE_CURVE('',#1553,#1555,#1557,.T.);-#1553 = VERTEX_POINT('',#1554);-#1554 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#1555 = VERTEX_POINT('',#1556);-#1556 = CARTESIAN_POINT('',(-2.15,0.475,0.445));-#1557 = LINE('',#1558,#1559);-#1558 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#1559 = VECTOR('',#1560,1.);-#1560 = DIRECTION('',(0.,1.,0.));-#1561 = ORIENTED_EDGE('',*,*,#1562,.T.);-#1562 = EDGE_CURVE('',#1553,#1513,#1563,.T.);-#1563 = LINE('',#1564,#1565);-#1564 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#1565 = VECTOR('',#1566,1.);-#1566 = DIRECTION('',(0.,0.,1.));-#1567 = ORIENTED_EDGE('',*,*,#1512,.T.);-#1568 = ORIENTED_EDGE('',*,*,#1569,.F.);-#1569 = EDGE_CURVE('',#1555,#1515,#1570,.T.);-#1570 = LINE('',#1571,#1572);-#1571 = CARTESIAN_POINT('',(-2.15,0.475,0.445));-#1572 = VECTOR('',#1573,1.);-#1573 = DIRECTION('',(0.,0.,1.));-#1574 = PLANE('',#1575);-#1575 = AXIS2_PLACEMENT_3D('',#1576,#1577,#1578);-#1576 = CARTESIAN_POINT('',(-2.15,0.325,0.445));-#1577 = DIRECTION('',(-1.,0.,0.));-#1578 = DIRECTION('',(0.,0.,1.));-#1579 = ADVANCED_FACE('',(#1580),#1605,.F.);-#1580 = FACE_BOUND('',#1581,.F.);-#1581 = EDGE_LOOP('',(#1582,#1590,#1598,#1604));-#1582 = ORIENTED_EDGE('',*,*,#1583,.T.);-#1583 = EDGE_CURVE('',#1523,#1584,#1586,.T.);-#1584 = VERTEX_POINT('',#1585);-#1585 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));-#1586 = LINE('',#1587,#1588);-#1587 = CARTESIAN_POINT('',(-2.35,0.175,0.595));-#1588 = VECTOR('',#1589,1.);-#1589 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1590 = ORIENTED_EDGE('',*,*,#1591,.F.);-#1591 = EDGE_CURVE('',#1592,#1584,#1594,.T.);-#1592 = VERTEX_POINT('',#1593);-#1593 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));-#1594 = LINE('',#1595,#1596);-#1595 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));-#1596 = VECTOR('',#1597,1.);-#1597 = DIRECTION('',(0.,-1.,0.));-#1598 = ORIENTED_EDGE('',*,*,#1599,.F.);-#1599 = EDGE_CURVE('',#1531,#1592,#1600,.T.);-#1600 = LINE('',#1601,#1602);-#1601 = CARTESIAN_POINT('',(-2.35,0.475,0.595));-#1602 = VECTOR('',#1603,1.);-#1603 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1604 = ORIENTED_EDGE('',*,*,#1530,.T.);-#1605 = PLANE('',#1606);-#1606 = AXIS2_PLACEMENT_3D('',#1607,#1608,#1609);-#1607 = CARTESIAN_POINT('',(-2.35,0.325,0.595));-#1608 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#1609 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1610 = ADVANCED_FACE('',(#1611),#1654,.T.);-#1611 = FACE_BOUND('',#1612,.T.);-#1612 = EDGE_LOOP('',(#1613,#1614,#1615,#1623,#1631,#1639,#1647,#1653));-#1613 = ORIENTED_EDGE('',*,*,#1522,.T.);-#1614 = ORIENTED_EDGE('',*,*,#1583,.T.);-#1615 = ORIENTED_EDGE('',*,*,#1616,.T.);-#1616 = EDGE_CURVE('',#1584,#1617,#1619,.T.);-#1617 = VERTEX_POINT('',#1618);-#1618 = CARTESIAN_POINT('',(-3.205,0.175,0.15));-#1619 = LINE('',#1620,#1621);-#1620 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));-#1621 = VECTOR('',#1622,1.);-#1622 = DIRECTION('',(-1.,0.,0.));-#1623 = ORIENTED_EDGE('',*,*,#1624,.T.);-#1624 = EDGE_CURVE('',#1617,#1625,#1627,.T.);-#1625 = VERTEX_POINT('',#1626);-#1626 = CARTESIAN_POINT('',(-3.205,0.175,0.));-#1627 = LINE('',#1628,#1629);-#1628 = CARTESIAN_POINT('',(-3.205,0.175,0.15));-#1629 = VECTOR('',#1630,1.);-#1630 = DIRECTION('',(0.,0.,-1.));-#1631 = ORIENTED_EDGE('',*,*,#1632,.T.);-#1632 = EDGE_CURVE('',#1625,#1633,#1635,.T.);-#1633 = VERTEX_POINT('',#1634);-#1634 = CARTESIAN_POINT('',(-2.4875,0.175,0.));-#1635 = LINE('',#1636,#1637);-#1636 = CARTESIAN_POINT('',(-3.205,0.175,0.));-#1637 = VECTOR('',#1638,1.);-#1638 = DIRECTION('',(1.,0.,0.));-#1639 = ORIENTED_EDGE('',*,*,#1640,.T.);-#1640 = EDGE_CURVE('',#1633,#1641,#1643,.T.);-#1641 = VERTEX_POINT('',#1642);-#1642 = CARTESIAN_POINT('',(-2.2,0.175,0.445));-#1643 = LINE('',#1644,#1645);-#1644 = CARTESIAN_POINT('',(-2.4875,0.175,0.));-#1645 = VECTOR('',#1646,1.);-#1646 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1647 = ORIENTED_EDGE('',*,*,#1648,.T.);-#1648 = EDGE_CURVE('',#1641,#1553,#1649,.T.);+#1550 = EDGE_LOOP('',(#1551,#1552,#1560,#1568,#1576,#1584,#1592,#1600));+#1551 = ORIENTED_EDGE('',*,*,#1538,.T.);+#1552 = ORIENTED_EDGE('',*,*,#1553,.T.);+#1553 = EDGE_CURVE('',#1531,#1554,#1556,.T.);+#1554 = VERTEX_POINT('',#1555);+#1555 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(-2.35,0.475,0.595));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1560 = ORIENTED_EDGE('',*,*,#1561,.T.);+#1561 = EDGE_CURVE('',#1554,#1562,#1564,.T.);+#1562 = VERTEX_POINT('',#1563);+#1563 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#1564 = LINE('',#1565,#1566);+#1565 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#1566 = VECTOR('',#1567,1.);+#1567 = DIRECTION('',(-1.,0.,0.));+#1568 = ORIENTED_EDGE('',*,*,#1569,.T.);+#1569 = EDGE_CURVE('',#1562,#1570,#1572,.T.);+#1570 = VERTEX_POINT('',#1571);+#1571 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#1572 = LINE('',#1573,#1574);+#1573 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#1574 = VECTOR('',#1575,1.);+#1575 = DIRECTION('',(0.,0.,-1.));+#1576 = ORIENTED_EDGE('',*,*,#1577,.T.);+#1577 = EDGE_CURVE('',#1570,#1578,#1580,.T.);+#1578 = VERTEX_POINT('',#1579);+#1579 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(1.,0.,0.));+#1584 = ORIENTED_EDGE('',*,*,#1585,.T.);+#1585 = EDGE_CURVE('',#1578,#1586,#1588,.T.);+#1586 = VERTEX_POINT('',#1587);+#1587 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#1588 = LINE('',#1589,#1590);+#1589 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#1590 = VECTOR('',#1591,1.);+#1591 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1592 = ORIENTED_EDGE('',*,*,#1593,.T.);+#1593 = EDGE_CURVE('',#1586,#1594,#1596,.T.);+#1594 = VERTEX_POINT('',#1595);+#1595 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(1.,0.,0.));+#1600 = ORIENTED_EDGE('',*,*,#1601,.T.);+#1601 = EDGE_CURVE('',#1594,#1515,#1602,.T.);+#1602 = LINE('',#1603,#1604);+#1603 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#1604 = VECTOR('',#1605,1.);+#1605 = DIRECTION('',(0.,0.,1.));+#1606 = PLANE('',#1607);+#1607 = AXIS2_PLACEMENT_3D('',#1608,#1609,#1610);+#1608 = CARTESIAN_POINT('',(-2.634182274245,0.475,0.217942023204));+#1609 = DIRECTION('',(-0.,-1.,-0.));+#1610 = DIRECTION('',(0.,0.,-1.));+#1611 = ADVANCED_FACE('',(#1612),#1637,.F.);+#1612 = FACE_BOUND('',#1613,.F.);+#1613 = EDGE_LOOP('',(#1614,#1622,#1630,#1636));+#1614 = ORIENTED_EDGE('',*,*,#1615,.F.);+#1615 = EDGE_CURVE('',#1616,#1586,#1618,.T.);+#1616 = VERTEX_POINT('',#1617);+#1617 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#1618 = LINE('',#1619,#1620);+#1619 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#1620 = VECTOR('',#1621,1.);+#1621 = DIRECTION('',(0.,1.,0.));+#1622 = ORIENTED_EDGE('',*,*,#1623,.T.);+#1623 = EDGE_CURVE('',#1616,#1624,#1626,.T.);+#1624 = VERTEX_POINT('',#1625);+#1625 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#1626 = LINE('',#1627,#1628);+#1627 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#1628 = VECTOR('',#1629,1.);+#1629 = DIRECTION('',(1.,0.,0.));+#1630 = ORIENTED_EDGE('',*,*,#1631,.T.);+#1631 = EDGE_CURVE('',#1624,#1594,#1632,.T.);+#1632 = LINE('',#1633,#1634);+#1633 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#1634 = VECTOR('',#1635,1.);+#1635 = DIRECTION('',(0.,1.,0.));+#1636 = ORIENTED_EDGE('',*,*,#1593,.F.);+#1637 = PLANE('',#1638);+#1638 = AXIS2_PLACEMENT_3D('',#1639,#1640,#1641);+#1639 = CARTESIAN_POINT('',(-2.2,0.325,0.445));+#1640 = DIRECTION('',(-0.,0.,1.));+#1641 = DIRECTION('',(1.,0.,0.));+#1642 = ADVANCED_FACE('',(#1643),#1661,.F.);+#1643 = FACE_BOUND('',#1644,.F.);+#1644 = EDGE_LOOP('',(#1645,#1653,#1654,#1655));+#1645 = ORIENTED_EDGE('',*,*,#1646,.T.);+#1646 = EDGE_CURVE('',#1647,#1616,#1649,.T.);+#1647 = VERTEX_POINT('',#1648);+#1648 = CARTESIAN_POINT('',(-2.4875,0.175,0.)); #1649 = LINE('',#1650,#1651);-#1650 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#1650 = CARTESIAN_POINT('',(-2.4875,0.175,0.)); #1651 = VECTOR('',#1652,1.);-#1652 = DIRECTION('',(1.,0.,0.));-#1653 = ORIENTED_EDGE('',*,*,#1562,.T.);-#1654 = PLANE('',#1655);-#1655 = AXIS2_PLACEMENT_3D('',#1656,#1657,#1658);-#1656 = CARTESIAN_POINT('',(-2.634182274245,0.175,0.217942023204));-#1657 = DIRECTION('',(-0.,-1.,-0.));-#1658 = DIRECTION('',(0.,0.,-1.));-#1659 = ADVANCED_FACE('',(#1660),#1678,.F.);-#1660 = FACE_BOUND('',#1661,.F.);-#1661 = EDGE_LOOP('',(#1662,#1670,#1671,#1672));-#1662 = ORIENTED_EDGE('',*,*,#1663,.F.);-#1663 = EDGE_CURVE('',#1641,#1664,#1666,.T.);-#1664 = VERTEX_POINT('',#1665);-#1665 = CARTESIAN_POINT('',(-2.2,0.475,0.445));-#1666 = LINE('',#1667,#1668);-#1667 = CARTESIAN_POINT('',(-2.2,0.175,0.445));-#1668 = VECTOR('',#1669,1.);-#1669 = DIRECTION('',(0.,1.,0.));-#1670 = ORIENTED_EDGE('',*,*,#1648,.T.);-#1671 = ORIENTED_EDGE('',*,*,#1552,.T.);-#1672 = ORIENTED_EDGE('',*,*,#1673,.F.);-#1673 = EDGE_CURVE('',#1664,#1555,#1674,.T.);-#1674 = LINE('',#1675,#1676);-#1675 = CARTESIAN_POINT('',(-2.2,0.475,0.445));-#1676 = VECTOR('',#1677,1.);-#1677 = DIRECTION('',(1.,0.,0.));-#1678 = PLANE('',#1679);-#1679 = AXIS2_PLACEMENT_3D('',#1680,#1681,#1682);-#1680 = CARTESIAN_POINT('',(-2.2,0.325,0.445));-#1681 = DIRECTION('',(-0.,0.,1.));-#1682 = DIRECTION('',(1.,0.,0.));-#1683 = ADVANCED_FACE('',(#1684),#1702,.F.);-#1684 = FACE_BOUND('',#1685,.F.);-#1685 = EDGE_LOOP('',(#1686,#1687,#1695,#1701));-#1686 = ORIENTED_EDGE('',*,*,#1616,.T.);-#1687 = ORIENTED_EDGE('',*,*,#1688,.F.);-#1688 = EDGE_CURVE('',#1689,#1617,#1691,.T.);-#1689 = VERTEX_POINT('',#1690);-#1690 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#1691 = LINE('',#1692,#1693);-#1692 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#1693 = VECTOR('',#1694,1.);-#1694 = DIRECTION('',(0.,-1.,0.));-#1695 = ORIENTED_EDGE('',*,*,#1696,.F.);-#1696 = EDGE_CURVE('',#1592,#1689,#1697,.T.);+#1652 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1653 = ORIENTED_EDGE('',*,*,#1615,.T.);+#1654 = ORIENTED_EDGE('',*,*,#1585,.F.);+#1655 = ORIENTED_EDGE('',*,*,#1656,.T.);+#1656 = EDGE_CURVE('',#1578,#1647,#1657,.T.);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(0.,-1.,0.));+#1661 = PLANE('',#1662);+#1662 = AXIS2_PLACEMENT_3D('',#1663,#1664,#1665);+#1663 = CARTESIAN_POINT('',(-2.4875,0.325,0.));+#1664 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1665 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1666 = ADVANCED_FACE('',(#1667),#1685,.F.);+#1667 = FACE_BOUND('',#1668,.F.);+#1668 = EDGE_LOOP('',(#1669,#1677,#1678,#1679));+#1669 = ORIENTED_EDGE('',*,*,#1670,.T.);+#1670 = EDGE_CURVE('',#1671,#1647,#1673,.T.);+#1671 = VERTEX_POINT('',#1672);+#1672 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#1673 = LINE('',#1674,#1675);+#1674 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#1675 = VECTOR('',#1676,1.);+#1676 = DIRECTION('',(1.,0.,0.));+#1677 = ORIENTED_EDGE('',*,*,#1656,.F.);+#1678 = ORIENTED_EDGE('',*,*,#1577,.F.);+#1679 = ORIENTED_EDGE('',*,*,#1680,.T.);+#1680 = EDGE_CURVE('',#1570,#1671,#1681,.T.);+#1681 = LINE('',#1682,#1683);+#1682 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#1683 = VECTOR('',#1684,1.);+#1684 = DIRECTION('',(0.,-1.,0.));+#1685 = PLANE('',#1686);+#1686 = AXIS2_PLACEMENT_3D('',#1687,#1688,#1689);+#1687 = CARTESIAN_POINT('',(-3.205,0.325,0.));+#1688 = DIRECTION('',(-0.,0.,1.));+#1689 = DIRECTION('',(1.,0.,0.));+#1690 = ADVANCED_FACE('',(#1691),#1709,.F.);+#1691 = FACE_BOUND('',#1692,.F.);+#1692 = EDGE_LOOP('',(#1693,#1701,#1702,#1703));+#1693 = ORIENTED_EDGE('',*,*,#1694,.T.);+#1694 = EDGE_CURVE('',#1695,#1671,#1697,.T.);+#1695 = VERTEX_POINT('',#1696);+#1696 = CARTESIAN_POINT('',(-3.205,0.175,0.15)); #1697 = LINE('',#1698,#1699);-#1698 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#1698 = CARTESIAN_POINT('',(-3.205,0.175,0.15)); #1699 = VECTOR('',#1700,1.);-#1700 = DIRECTION('',(-1.,0.,0.));-#1701 = ORIENTED_EDGE('',*,*,#1591,.T.);-#1702 = PLANE('',#1703);-#1703 = AXIS2_PLACEMENT_3D('',#1704,#1705,#1706);-#1704 = CARTESIAN_POINT('',(-2.6375,0.325,0.15));-#1705 = DIRECTION('',(-0.,-0.,-1.));-#1706 = DIRECTION('',(-1.,0.,0.));-#1707 = ADVANCED_FACE('',(#1708),#1737,.F.);-#1708 = FACE_BOUND('',#1709,.F.);-#1709 = EDGE_LOOP('',(#1710,#1711,#1712,#1713,#1721,#1729,#1735,#1736));-#1710 = ORIENTED_EDGE('',*,*,#1538,.T.);-#1711 = ORIENTED_EDGE('',*,*,#1599,.T.);-#1712 = ORIENTED_EDGE('',*,*,#1696,.T.);-#1713 = ORIENTED_EDGE('',*,*,#1714,.T.);-#1714 = EDGE_CURVE('',#1689,#1715,#1717,.T.);-#1715 = VERTEX_POINT('',#1716);-#1716 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#1717 = LINE('',#1718,#1719);-#1718 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#1719 = VECTOR('',#1720,1.);-#1720 = DIRECTION('',(0.,0.,-1.));-#1721 = ORIENTED_EDGE('',*,*,#1722,.T.);-#1722 = EDGE_CURVE('',#1715,#1723,#1725,.T.);-#1723 = VERTEX_POINT('',#1724);-#1724 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#1725 = LINE('',#1726,#1727);-#1726 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#1727 = VECTOR('',#1728,1.);-#1728 = DIRECTION('',(1.,0.,0.));-#1729 = ORIENTED_EDGE('',*,*,#1730,.T.);-#1730 = EDGE_CURVE('',#1723,#1664,#1731,.T.);-#1731 = LINE('',#1732,#1733);-#1732 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#1733 = VECTOR('',#1734,1.);-#1734 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1735 = ORIENTED_EDGE('',*,*,#1673,.T.);-#1736 = ORIENTED_EDGE('',*,*,#1569,.T.);-#1737 = PLANE('',#1738);-#1738 = AXIS2_PLACEMENT_3D('',#1739,#1740,#1741);-#1739 = CARTESIAN_POINT('',(-2.634182274245,0.475,0.217942023204));-#1740 = DIRECTION('',(-0.,-1.,-0.));-#1741 = DIRECTION('',(0.,0.,-1.));-#1742 = ADVANCED_FACE('',(#1743),#1754,.F.);-#1743 = FACE_BOUND('',#1744,.F.);-#1744 = EDGE_LOOP('',(#1745,#1746,#1752,#1753));-#1745 = ORIENTED_EDGE('',*,*,#1624,.T.);-#1746 = ORIENTED_EDGE('',*,*,#1747,.F.);-#1747 = EDGE_CURVE('',#1715,#1625,#1748,.T.);-#1748 = LINE('',#1749,#1750);-#1749 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#1750 = VECTOR('',#1751,1.);-#1751 = DIRECTION('',(0.,-1.,0.));-#1752 = ORIENTED_EDGE('',*,*,#1714,.F.);-#1753 = ORIENTED_EDGE('',*,*,#1688,.T.);-#1754 = PLANE('',#1755);-#1755 = AXIS2_PLACEMENT_3D('',#1756,#1757,#1758);-#1756 = CARTESIAN_POINT('',(-3.205,0.325,0.15));-#1757 = DIRECTION('',(1.,0.,0.));-#1758 = DIRECTION('',(0.,0.,-1.));-#1759 = ADVANCED_FACE('',(#1760),#1771,.F.);-#1760 = FACE_BOUND('',#1761,.F.);-#1761 = EDGE_LOOP('',(#1762,#1763,#1769,#1770));-#1762 = ORIENTED_EDGE('',*,*,#1632,.T.);-#1763 = ORIENTED_EDGE('',*,*,#1764,.F.);-#1764 = EDGE_CURVE('',#1723,#1633,#1765,.T.);-#1765 = LINE('',#1766,#1767);-#1766 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#1767 = VECTOR('',#1768,1.);-#1768 = DIRECTION('',(0.,-1.,0.));-#1769 = ORIENTED_EDGE('',*,*,#1722,.F.);-#1770 = ORIENTED_EDGE('',*,*,#1747,.T.);+#1700 = DIRECTION('',(0.,0.,-1.));+#1701 = ORIENTED_EDGE('',*,*,#1680,.F.);+#1702 = ORIENTED_EDGE('',*,*,#1569,.F.);+#1703 = ORIENTED_EDGE('',*,*,#1704,.T.);+#1704 = EDGE_CURVE('',#1562,#1695,#1705,.T.);+#1705 = LINE('',#1706,#1707);+#1706 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#1707 = VECTOR('',#1708,1.);+#1708 = DIRECTION('',(0.,-1.,0.));+#1709 = PLANE('',#1710);+#1710 = AXIS2_PLACEMENT_3D('',#1711,#1712,#1713);+#1711 = CARTESIAN_POINT('',(-3.205,0.325,0.15));+#1712 = DIRECTION('',(1.,0.,0.));+#1713 = DIRECTION('',(0.,0.,-1.));+#1714 = ADVANCED_FACE('',(#1715),#1733,.F.);+#1715 = FACE_BOUND('',#1716,.F.);+#1716 = EDGE_LOOP('',(#1717,#1725,#1726,#1727));+#1717 = ORIENTED_EDGE('',*,*,#1718,.T.);+#1718 = EDGE_CURVE('',#1719,#1695,#1721,.T.);+#1719 = VERTEX_POINT('',#1720);+#1720 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#1721 = LINE('',#1722,#1723);+#1722 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#1723 = VECTOR('',#1724,1.);+#1724 = DIRECTION('',(-1.,0.,0.));+#1725 = ORIENTED_EDGE('',*,*,#1704,.F.);+#1726 = ORIENTED_EDGE('',*,*,#1561,.F.);+#1727 = ORIENTED_EDGE('',*,*,#1728,.T.);+#1728 = EDGE_CURVE('',#1554,#1719,#1729,.T.);+#1729 = LINE('',#1730,#1731);+#1730 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#1731 = VECTOR('',#1732,1.);+#1732 = DIRECTION('',(0.,-1.,0.));+#1733 = PLANE('',#1734);+#1734 = AXIS2_PLACEMENT_3D('',#1735,#1736,#1737);+#1735 = CARTESIAN_POINT('',(-2.6375,0.325,0.15));+#1736 = DIRECTION('',(-0.,-0.,-1.));+#1737 = DIRECTION('',(-1.,0.,0.));+#1738 = ADVANCED_FACE('',(#1739),#1750,.F.);+#1739 = FACE_BOUND('',#1740,.F.);+#1740 = EDGE_LOOP('',(#1741,#1747,#1748,#1749));+#1741 = ORIENTED_EDGE('',*,*,#1742,.T.);+#1742 = EDGE_CURVE('',#1523,#1719,#1743,.T.);+#1743 = LINE('',#1744,#1745);+#1744 = CARTESIAN_POINT('',(-2.35,0.175,0.595));+#1745 = VECTOR('',#1746,1.);+#1746 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1747 = ORIENTED_EDGE('',*,*,#1728,.F.);+#1748 = ORIENTED_EDGE('',*,*,#1553,.F.);+#1749 = ORIENTED_EDGE('',*,*,#1530,.T.);+#1750 = PLANE('',#1751);+#1751 = AXIS2_PLACEMENT_3D('',#1752,#1753,#1754);+#1752 = CARTESIAN_POINT('',(-2.35,0.325,0.595));+#1753 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#1754 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1755 = ADVANCED_FACE('',(#1756),#1771,.T.);+#1756 = FACE_BOUND('',#1757,.T.);+#1757 = EDGE_LOOP('',(#1758,#1759,#1760,#1761,#1762,#1763,#1764,#1765));+#1758 = ORIENTED_EDGE('',*,*,#1522,.T.);+#1759 = ORIENTED_EDGE('',*,*,#1742,.T.);+#1760 = ORIENTED_EDGE('',*,*,#1718,.T.);+#1761 = ORIENTED_EDGE('',*,*,#1694,.T.);+#1762 = ORIENTED_EDGE('',*,*,#1670,.T.);+#1763 = ORIENTED_EDGE('',*,*,#1646,.T.);+#1764 = ORIENTED_EDGE('',*,*,#1623,.T.);+#1765 = ORIENTED_EDGE('',*,*,#1766,.T.);+#1766 = EDGE_CURVE('',#1624,#1513,#1767,.T.);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,0.,1.)); #1771 = PLANE('',#1772); #1772 = AXIS2_PLACEMENT_3D('',#1773,#1774,#1775);-#1773 = CARTESIAN_POINT('',(-3.205,0.325,0.));-#1774 = DIRECTION('',(-0.,0.,1.));-#1775 = DIRECTION('',(1.,0.,0.));+#1773 = CARTESIAN_POINT('',(-2.634182274245,0.175,0.217942023204));+#1774 = DIRECTION('',(-0.,-1.,-0.));+#1775 = DIRECTION('',(0.,0.,-1.)); #1776 = ADVANCED_FACE('',(#1777),#1783,.F.); #1777 = FACE_BOUND('',#1778,.F.); #1778 = EDGE_LOOP('',(#1779,#1780,#1781,#1782));-#1779 = ORIENTED_EDGE('',*,*,#1640,.T.);-#1780 = ORIENTED_EDGE('',*,*,#1663,.T.);-#1781 = ORIENTED_EDGE('',*,*,#1730,.F.);-#1782 = ORIENTED_EDGE('',*,*,#1764,.T.);+#1779 = ORIENTED_EDGE('',*,*,#1631,.F.);+#1780 = ORIENTED_EDGE('',*,*,#1766,.T.);+#1781 = ORIENTED_EDGE('',*,*,#1512,.T.);+#1782 = ORIENTED_EDGE('',*,*,#1601,.F.); #1783 = PLANE('',#1784); #1784 = AXIS2_PLACEMENT_3D('',#1785,#1786,#1787);-#1785 = CARTESIAN_POINT('',(-2.4875,0.325,0.));-#1786 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#1787 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1785 = CARTESIAN_POINT('',(-2.15,0.325,0.445));+#1786 = DIRECTION('',(-1.,0.,0.));+#1787 = DIRECTION('',(0.,0.,1.)); #1788 = MANIFOLD_SOLID_BREP('',#1789);-#1789 = CLOSED_SHELL('',(#1790,#1830,#1861,#1892,#1941,#1965,#1989,#2024- ,#2041,#2058));+#1789 = CLOSED_SHELL('',(#1790,#1830,#1893,#1924,#1948,#1972,#1996,#2020+ ,#2037,#2058)); #1790 = ADVANCED_FACE('',(#1791),#1825,.F.); #1791 = FACE_BOUND('',#1792,.F.); #1792 = EDGE_LOOP('',(#1793,#1803,#1811,#1819));@@ -1867,249 +1867,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #1827 = CARTESIAN_POINT('',(-2.15,-0.325,0.595)); #1828 = DIRECTION('',(-0.,-0.,-1.)); #1829 = DIRECTION('',(-1.,0.,0.));-#1830 = ADVANCED_FACE('',(#1831),#1856,.F.);+#1830 = ADVANCED_FACE('',(#1831),#1888,.F.); #1831 = FACE_BOUND('',#1832,.F.);-#1832 = EDGE_LOOP('',(#1833,#1843,#1849,#1850));-#1833 = ORIENTED_EDGE('',*,*,#1834,.F.);-#1834 = EDGE_CURVE('',#1835,#1837,#1839,.T.);-#1835 = VERTEX_POINT('',#1836);-#1836 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#1837 = VERTEX_POINT('',#1838);-#1838 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));-#1839 = LINE('',#1840,#1841);-#1840 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#1841 = VECTOR('',#1842,1.);-#1842 = DIRECTION('',(0.,1.,0.));-#1843 = ORIENTED_EDGE('',*,*,#1844,.T.);-#1844 = EDGE_CURVE('',#1835,#1795,#1845,.T.);-#1845 = LINE('',#1846,#1847);-#1846 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#1847 = VECTOR('',#1848,1.);-#1848 = DIRECTION('',(0.,0.,1.));-#1849 = ORIENTED_EDGE('',*,*,#1794,.T.);-#1850 = ORIENTED_EDGE('',*,*,#1851,.F.);-#1851 = EDGE_CURVE('',#1837,#1797,#1852,.T.);-#1852 = LINE('',#1853,#1854);-#1853 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));-#1854 = VECTOR('',#1855,1.);-#1855 = DIRECTION('',(0.,0.,1.));-#1856 = PLANE('',#1857);-#1857 = AXIS2_PLACEMENT_3D('',#1858,#1859,#1860);-#1858 = CARTESIAN_POINT('',(-2.15,-0.325,0.445));-#1859 = DIRECTION('',(-1.,0.,0.));-#1860 = DIRECTION('',(0.,0.,1.));-#1861 = ADVANCED_FACE('',(#1862),#1887,.F.);-#1862 = FACE_BOUND('',#1863,.F.);-#1863 = EDGE_LOOP('',(#1864,#1872,#1880,#1886));-#1864 = ORIENTED_EDGE('',*,*,#1865,.T.);-#1865 = EDGE_CURVE('',#1805,#1866,#1868,.T.);-#1866 = VERTEX_POINT('',#1867);-#1867 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));-#1868 = LINE('',#1869,#1870);-#1869 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));-#1870 = VECTOR('',#1871,1.);-#1871 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1872 = ORIENTED_EDGE('',*,*,#1873,.F.);-#1873 = EDGE_CURVE('',#1874,#1866,#1876,.T.);-#1874 = VERTEX_POINT('',#1875);-#1875 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));-#1876 = LINE('',#1877,#1878);-#1877 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));-#1878 = VECTOR('',#1879,1.);-#1879 = DIRECTION('',(0.,-1.,0.));-#1880 = ORIENTED_EDGE('',*,*,#1881,.F.);-#1881 = EDGE_CURVE('',#1813,#1874,#1882,.T.);-#1882 = LINE('',#1883,#1884);-#1883 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));-#1884 = VECTOR('',#1885,1.);-#1885 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1886 = ORIENTED_EDGE('',*,*,#1812,.T.);-#1887 = PLANE('',#1888);-#1888 = AXIS2_PLACEMENT_3D('',#1889,#1890,#1891);-#1889 = CARTESIAN_POINT('',(-2.35,-0.325,0.595));-#1890 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#1891 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1892 = ADVANCED_FACE('',(#1893),#1936,.T.);-#1893 = FACE_BOUND('',#1894,.T.);-#1894 = EDGE_LOOP('',(#1895,#1896,#1897,#1905,#1913,#1921,#1929,#1935));-#1895 = ORIENTED_EDGE('',*,*,#1804,.T.);-#1896 = ORIENTED_EDGE('',*,*,#1865,.T.);-#1897 = ORIENTED_EDGE('',*,*,#1898,.T.);-#1898 = EDGE_CURVE('',#1866,#1899,#1901,.T.);-#1899 = VERTEX_POINT('',#1900);-#1900 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));-#1901 = LINE('',#1902,#1903);-#1902 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));-#1903 = VECTOR('',#1904,1.);-#1904 = DIRECTION('',(-1.,0.,0.));-#1905 = ORIENTED_EDGE('',*,*,#1906,.T.);-#1906 = EDGE_CURVE('',#1899,#1907,#1909,.T.);-#1907 = VERTEX_POINT('',#1908);-#1908 = CARTESIAN_POINT('',(-3.205,-0.475,0.));-#1909 = LINE('',#1910,#1911);-#1910 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));-#1911 = VECTOR('',#1912,1.);-#1912 = DIRECTION('',(0.,0.,-1.));-#1913 = ORIENTED_EDGE('',*,*,#1914,.T.);-#1914 = EDGE_CURVE('',#1907,#1915,#1917,.T.);-#1915 = VERTEX_POINT('',#1916);-#1916 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));-#1917 = LINE('',#1918,#1919);-#1918 = CARTESIAN_POINT('',(-3.205,-0.475,0.));-#1919 = VECTOR('',#1920,1.);-#1920 = DIRECTION('',(1.,0.,0.));-#1921 = ORIENTED_EDGE('',*,*,#1922,.T.);-#1922 = EDGE_CURVE('',#1915,#1923,#1925,.T.);-#1923 = VERTEX_POINT('',#1924);-#1924 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));-#1925 = LINE('',#1926,#1927);-#1926 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));-#1927 = VECTOR('',#1928,1.);-#1928 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1929 = ORIENTED_EDGE('',*,*,#1930,.T.);-#1930 = EDGE_CURVE('',#1923,#1835,#1931,.T.);+#1832 = EDGE_LOOP('',(#1833,#1834,#1842,#1850,#1858,#1866,#1874,#1882));+#1833 = ORIENTED_EDGE('',*,*,#1820,.T.);+#1834 = ORIENTED_EDGE('',*,*,#1835,.T.);+#1835 = EDGE_CURVE('',#1813,#1836,#1838,.T.);+#1836 = VERTEX_POINT('',#1837);+#1837 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#1838 = LINE('',#1839,#1840);+#1839 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));+#1840 = VECTOR('',#1841,1.);+#1841 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1842 = ORIENTED_EDGE('',*,*,#1843,.T.);+#1843 = EDGE_CURVE('',#1836,#1844,#1846,.T.);+#1844 = VERTEX_POINT('',#1845);+#1845 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(-1.,0.,0.));+#1850 = ORIENTED_EDGE('',*,*,#1851,.T.);+#1851 = EDGE_CURVE('',#1844,#1852,#1854,.T.);+#1852 = VERTEX_POINT('',#1853);+#1853 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#1854 = LINE('',#1855,#1856);+#1855 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#1856 = VECTOR('',#1857,1.);+#1857 = DIRECTION('',(0.,0.,-1.));+#1858 = ORIENTED_EDGE('',*,*,#1859,.T.);+#1859 = EDGE_CURVE('',#1852,#1860,#1862,.T.);+#1860 = VERTEX_POINT('',#1861);+#1861 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(1.,0.,0.));+#1866 = ORIENTED_EDGE('',*,*,#1867,.T.);+#1867 = EDGE_CURVE('',#1860,#1868,#1870,.T.);+#1868 = VERTEX_POINT('',#1869);+#1869 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#1870 = LINE('',#1871,#1872);+#1871 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#1872 = VECTOR('',#1873,1.);+#1873 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1874 = ORIENTED_EDGE('',*,*,#1875,.T.);+#1875 = EDGE_CURVE('',#1868,#1876,#1878,.T.);+#1876 = VERTEX_POINT('',#1877);+#1877 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#1878 = LINE('',#1879,#1880);+#1879 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#1880 = VECTOR('',#1881,1.);+#1881 = DIRECTION('',(1.,0.,0.));+#1882 = ORIENTED_EDGE('',*,*,#1883,.T.);+#1883 = EDGE_CURVE('',#1876,#1797,#1884,.T.);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(0.,0.,1.));+#1888 = PLANE('',#1889);+#1889 = AXIS2_PLACEMENT_3D('',#1890,#1891,#1892);+#1890 = CARTESIAN_POINT('',(-2.634182274245,-0.175,0.217942023204));+#1891 = DIRECTION('',(-0.,-1.,-0.));+#1892 = DIRECTION('',(0.,0.,-1.));+#1893 = ADVANCED_FACE('',(#1894),#1919,.F.);+#1894 = FACE_BOUND('',#1895,.F.);+#1895 = EDGE_LOOP('',(#1896,#1904,#1912,#1918));+#1896 = ORIENTED_EDGE('',*,*,#1897,.F.);+#1897 = EDGE_CURVE('',#1898,#1868,#1900,.T.);+#1898 = VERTEX_POINT('',#1899);+#1899 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#1900 = LINE('',#1901,#1902);+#1901 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#1902 = VECTOR('',#1903,1.);+#1903 = DIRECTION('',(0.,1.,0.));+#1904 = ORIENTED_EDGE('',*,*,#1905,.T.);+#1905 = EDGE_CURVE('',#1898,#1906,#1908,.T.);+#1906 = VERTEX_POINT('',#1907);+#1907 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#1908 = LINE('',#1909,#1910);+#1909 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#1910 = VECTOR('',#1911,1.);+#1911 = DIRECTION('',(1.,0.,0.));+#1912 = ORIENTED_EDGE('',*,*,#1913,.T.);+#1913 = EDGE_CURVE('',#1906,#1876,#1914,.T.);+#1914 = LINE('',#1915,#1916);+#1915 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#1916 = VECTOR('',#1917,1.);+#1917 = DIRECTION('',(0.,1.,0.));+#1918 = ORIENTED_EDGE('',*,*,#1875,.F.);+#1919 = PLANE('',#1920);+#1920 = AXIS2_PLACEMENT_3D('',#1921,#1922,#1923);+#1921 = CARTESIAN_POINT('',(-2.2,-0.325,0.445));+#1922 = DIRECTION('',(-0.,0.,1.));+#1923 = DIRECTION('',(1.,0.,0.));+#1924 = ADVANCED_FACE('',(#1925),#1943,.F.);+#1925 = FACE_BOUND('',#1926,.F.);+#1926 = EDGE_LOOP('',(#1927,#1935,#1936,#1937));+#1927 = ORIENTED_EDGE('',*,*,#1928,.T.);+#1928 = EDGE_CURVE('',#1929,#1898,#1931,.T.);+#1929 = VERTEX_POINT('',#1930);+#1930 = CARTESIAN_POINT('',(-2.4875,-0.475,0.)); #1931 = LINE('',#1932,#1933);-#1932 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#1932 = CARTESIAN_POINT('',(-2.4875,-0.475,0.)); #1933 = VECTOR('',#1934,1.);-#1934 = DIRECTION('',(1.,0.,0.));-#1935 = ORIENTED_EDGE('',*,*,#1844,.T.);-#1936 = PLANE('',#1937);-#1937 = AXIS2_PLACEMENT_3D('',#1938,#1939,#1940);-#1938 = CARTESIAN_POINT('',(-2.634182274245,-0.475,0.217942023204));-#1939 = DIRECTION('',(-0.,-1.,-0.));-#1940 = DIRECTION('',(0.,0.,-1.));-#1941 = ADVANCED_FACE('',(#1942),#1960,.F.);-#1942 = FACE_BOUND('',#1943,.F.);-#1943 = EDGE_LOOP('',(#1944,#1952,#1953,#1954));-#1944 = ORIENTED_EDGE('',*,*,#1945,.F.);-#1945 = EDGE_CURVE('',#1923,#1946,#1948,.T.);-#1946 = VERTEX_POINT('',#1947);-#1947 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));-#1948 = LINE('',#1949,#1950);-#1949 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));-#1950 = VECTOR('',#1951,1.);-#1951 = DIRECTION('',(0.,1.,0.));-#1952 = ORIENTED_EDGE('',*,*,#1930,.T.);-#1953 = ORIENTED_EDGE('',*,*,#1834,.T.);-#1954 = ORIENTED_EDGE('',*,*,#1955,.F.);-#1955 = EDGE_CURVE('',#1946,#1837,#1956,.T.);-#1956 = LINE('',#1957,#1958);-#1957 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));-#1958 = VECTOR('',#1959,1.);-#1959 = DIRECTION('',(1.,0.,0.));-#1960 = PLANE('',#1961);-#1961 = AXIS2_PLACEMENT_3D('',#1962,#1963,#1964);-#1962 = CARTESIAN_POINT('',(-2.2,-0.325,0.445));-#1963 = DIRECTION('',(-0.,0.,1.));-#1964 = DIRECTION('',(1.,0.,0.));-#1965 = ADVANCED_FACE('',(#1966),#1984,.F.);-#1966 = FACE_BOUND('',#1967,.F.);-#1967 = EDGE_LOOP('',(#1968,#1969,#1977,#1983));-#1968 = ORIENTED_EDGE('',*,*,#1898,.T.);-#1969 = ORIENTED_EDGE('',*,*,#1970,.F.);-#1970 = EDGE_CURVE('',#1971,#1899,#1973,.T.);-#1971 = VERTEX_POINT('',#1972);-#1972 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#1973 = LINE('',#1974,#1975);-#1974 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#1975 = VECTOR('',#1976,1.);-#1976 = DIRECTION('',(0.,-1.,0.));-#1977 = ORIENTED_EDGE('',*,*,#1978,.F.);-#1978 = EDGE_CURVE('',#1874,#1971,#1979,.T.);+#1934 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1935 = ORIENTED_EDGE('',*,*,#1897,.T.);+#1936 = ORIENTED_EDGE('',*,*,#1867,.F.);+#1937 = ORIENTED_EDGE('',*,*,#1938,.T.);+#1938 = EDGE_CURVE('',#1860,#1929,#1939,.T.);+#1939 = LINE('',#1940,#1941);+#1940 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#1941 = VECTOR('',#1942,1.);+#1942 = DIRECTION('',(0.,-1.,0.));+#1943 = PLANE('',#1944);+#1944 = AXIS2_PLACEMENT_3D('',#1945,#1946,#1947);+#1945 = CARTESIAN_POINT('',(-2.4875,-0.325,0.));+#1946 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1947 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1948 = ADVANCED_FACE('',(#1949),#1967,.F.);+#1949 = FACE_BOUND('',#1950,.F.);+#1950 = EDGE_LOOP('',(#1951,#1959,#1960,#1961));+#1951 = ORIENTED_EDGE('',*,*,#1952,.T.);+#1952 = EDGE_CURVE('',#1953,#1929,#1955,.T.);+#1953 = VERTEX_POINT('',#1954);+#1954 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#1955 = LINE('',#1956,#1957);+#1956 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#1957 = VECTOR('',#1958,1.);+#1958 = DIRECTION('',(1.,0.,0.));+#1959 = ORIENTED_EDGE('',*,*,#1938,.F.);+#1960 = ORIENTED_EDGE('',*,*,#1859,.F.);+#1961 = ORIENTED_EDGE('',*,*,#1962,.T.);+#1962 = EDGE_CURVE('',#1852,#1953,#1963,.T.);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(0.,-1.,0.));+#1967 = PLANE('',#1968);+#1968 = AXIS2_PLACEMENT_3D('',#1969,#1970,#1971);+#1969 = CARTESIAN_POINT('',(-3.205,-0.325,0.));+#1970 = DIRECTION('',(-0.,0.,1.));+#1971 = DIRECTION('',(1.,0.,0.));+#1972 = ADVANCED_FACE('',(#1973),#1991,.F.);+#1973 = FACE_BOUND('',#1974,.F.);+#1974 = EDGE_LOOP('',(#1975,#1983,#1984,#1985));+#1975 = ORIENTED_EDGE('',*,*,#1976,.T.);+#1976 = EDGE_CURVE('',#1977,#1953,#1979,.T.);+#1977 = VERTEX_POINT('',#1978);+#1978 = CARTESIAN_POINT('',(-3.205,-0.475,0.15)); #1979 = LINE('',#1980,#1981);-#1980 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#1980 = CARTESIAN_POINT('',(-3.205,-0.475,0.15)); #1981 = VECTOR('',#1982,1.);-#1982 = DIRECTION('',(-1.,0.,0.));-#1983 = ORIENTED_EDGE('',*,*,#1873,.T.);-#1984 = PLANE('',#1985);-#1985 = AXIS2_PLACEMENT_3D('',#1986,#1987,#1988);-#1986 = CARTESIAN_POINT('',(-2.6375,-0.325,0.15));-#1987 = DIRECTION('',(-0.,-0.,-1.));-#1988 = DIRECTION('',(-1.,0.,0.));-#1989 = ADVANCED_FACE('',(#1990),#2019,.F.);-#1990 = FACE_BOUND('',#1991,.F.);-#1991 = EDGE_LOOP('',(#1992,#1993,#1994,#1995,#2003,#2011,#2017,#2018));-#1992 = ORIENTED_EDGE('',*,*,#1820,.T.);-#1993 = ORIENTED_EDGE('',*,*,#1881,.T.);-#1994 = ORIENTED_EDGE('',*,*,#1978,.T.);-#1995 = ORIENTED_EDGE('',*,*,#1996,.T.);-#1996 = EDGE_CURVE('',#1971,#1997,#1999,.T.);-#1997 = VERTEX_POINT('',#1998);-#1998 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#1999 = LINE('',#2000,#2001);-#2000 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#2001 = VECTOR('',#2002,1.);-#2002 = DIRECTION('',(0.,0.,-1.));-#2003 = ORIENTED_EDGE('',*,*,#2004,.T.);-#2004 = EDGE_CURVE('',#1997,#2005,#2007,.T.);-#2005 = VERTEX_POINT('',#2006);-#2006 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#2007 = LINE('',#2008,#2009);-#2008 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#2009 = VECTOR('',#2010,1.);-#2010 = DIRECTION('',(1.,0.,0.));-#2011 = ORIENTED_EDGE('',*,*,#2012,.T.);-#2012 = EDGE_CURVE('',#2005,#1946,#2013,.T.);-#2013 = LINE('',#2014,#2015);-#2014 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#2015 = VECTOR('',#2016,1.);-#2016 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2017 = ORIENTED_EDGE('',*,*,#1955,.T.);-#2018 = ORIENTED_EDGE('',*,*,#1851,.T.);-#2019 = PLANE('',#2020);-#2020 = AXIS2_PLACEMENT_3D('',#2021,#2022,#2023);-#2021 = CARTESIAN_POINT('',(-2.634182274245,-0.175,0.217942023204));-#2022 = DIRECTION('',(-0.,-1.,-0.));-#2023 = DIRECTION('',(0.,0.,-1.));-#2024 = ADVANCED_FACE('',(#2025),#2036,.F.);-#2025 = FACE_BOUND('',#2026,.F.);-#2026 = EDGE_LOOP('',(#2027,#2028,#2034,#2035));-#2027 = ORIENTED_EDGE('',*,*,#1906,.T.);-#2028 = ORIENTED_EDGE('',*,*,#2029,.F.);-#2029 = EDGE_CURVE('',#1997,#1907,#2030,.T.);-#2030 = LINE('',#2031,#2032);-#2031 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#2032 = VECTOR('',#2033,1.);-#2033 = DIRECTION('',(0.,-1.,0.));-#2034 = ORIENTED_EDGE('',*,*,#1996,.F.);-#2035 = ORIENTED_EDGE('',*,*,#1970,.T.);-#2036 = PLANE('',#2037);-#2037 = AXIS2_PLACEMENT_3D('',#2038,#2039,#2040);-#2038 = CARTESIAN_POINT('',(-3.205,-0.325,0.15));-#2039 = DIRECTION('',(1.,0.,0.));-#2040 = DIRECTION('',(0.,0.,-1.));-#2041 = ADVANCED_FACE('',(#2042),#2053,.F.);-#2042 = FACE_BOUND('',#2043,.F.);-#2043 = EDGE_LOOP('',(#2044,#2045,#2051,#2052));-#2044 = ORIENTED_EDGE('',*,*,#1914,.T.);-#2045 = ORIENTED_EDGE('',*,*,#2046,.F.);-#2046 = EDGE_CURVE('',#2005,#1915,#2047,.T.);-#2047 = LINE('',#2048,#2049);-#2048 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#2049 = VECTOR('',#2050,1.);-#2050 = DIRECTION('',(0.,-1.,0.));-#2051 = ORIENTED_EDGE('',*,*,#2004,.F.);-#2052 = ORIENTED_EDGE('',*,*,#2029,.T.);+#1982 = DIRECTION('',(0.,0.,-1.));+#1983 = ORIENTED_EDGE('',*,*,#1962,.F.);+#1984 = ORIENTED_EDGE('',*,*,#1851,.F.);+#1985 = ORIENTED_EDGE('',*,*,#1986,.T.);+#1986 = EDGE_CURVE('',#1844,#1977,#1987,.T.);+#1987 = LINE('',#1988,#1989);+#1988 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#1989 = VECTOR('',#1990,1.);+#1990 = DIRECTION('',(0.,-1.,0.));+#1991 = PLANE('',#1992);+#1992 = AXIS2_PLACEMENT_3D('',#1993,#1994,#1995);+#1993 = CARTESIAN_POINT('',(-3.205,-0.325,0.15));+#1994 = DIRECTION('',(1.,0.,0.));+#1995 = DIRECTION('',(0.,0.,-1.));+#1996 = ADVANCED_FACE('',(#1997),#2015,.F.);+#1997 = FACE_BOUND('',#1998,.F.);+#1998 = EDGE_LOOP('',(#1999,#2007,#2008,#2009));+#1999 = ORIENTED_EDGE('',*,*,#2000,.T.);+#2000 = EDGE_CURVE('',#2001,#1977,#2003,.T.);+#2001 = VERTEX_POINT('',#2002);+#2002 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#2003 = LINE('',#2004,#2005);+#2004 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#2005 = VECTOR('',#2006,1.);+#2006 = DIRECTION('',(-1.,0.,0.));+#2007 = ORIENTED_EDGE('',*,*,#1986,.F.);+#2008 = ORIENTED_EDGE('',*,*,#1843,.F.);+#2009 = ORIENTED_EDGE('',*,*,#2010,.T.);+#2010 = EDGE_CURVE('',#1836,#2001,#2011,.T.);+#2011 = LINE('',#2012,#2013);+#2012 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#2013 = VECTOR('',#2014,1.);+#2014 = DIRECTION('',(0.,-1.,0.));+#2015 = PLANE('',#2016);+#2016 = AXIS2_PLACEMENT_3D('',#2017,#2018,#2019);+#2017 = CARTESIAN_POINT('',(-2.6375,-0.325,0.15));+#2018 = DIRECTION('',(-0.,-0.,-1.));+#2019 = DIRECTION('',(-1.,0.,0.));+#2020 = ADVANCED_FACE('',(#2021),#2032,.F.);+#2021 = FACE_BOUND('',#2022,.F.);+#2022 = EDGE_LOOP('',(#2023,#2029,#2030,#2031));+#2023 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2024 = EDGE_CURVE('',#1805,#2001,#2025,.T.);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2029 = ORIENTED_EDGE('',*,*,#2010,.F.);+#2030 = ORIENTED_EDGE('',*,*,#1835,.F.);+#2031 = ORIENTED_EDGE('',*,*,#1812,.T.);+#2032 = PLANE('',#2033);+#2033 = AXIS2_PLACEMENT_3D('',#2034,#2035,#2036);+#2034 = CARTESIAN_POINT('',(-2.35,-0.325,0.595));+#2035 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2036 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2037 = ADVANCED_FACE('',(#2038),#2053,.T.);+#2038 = FACE_BOUND('',#2039,.T.);+#2039 = EDGE_LOOP('',(#2040,#2041,#2042,#2043,#2044,#2045,#2046,#2047));+#2040 = ORIENTED_EDGE('',*,*,#1804,.T.);+#2041 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2042 = ORIENTED_EDGE('',*,*,#2000,.T.);+#2043 = ORIENTED_EDGE('',*,*,#1976,.T.);+#2044 = ORIENTED_EDGE('',*,*,#1952,.T.);+#2045 = ORIENTED_EDGE('',*,*,#1928,.T.);+#2046 = ORIENTED_EDGE('',*,*,#1905,.T.);+#2047 = ORIENTED_EDGE('',*,*,#2048,.T.);+#2048 = EDGE_CURVE('',#1906,#1795,#2049,.T.);+#2049 = LINE('',#2050,#2051);+#2050 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#2051 = VECTOR('',#2052,1.);+#2052 = DIRECTION('',(0.,0.,1.)); #2053 = PLANE('',#2054); #2054 = AXIS2_PLACEMENT_3D('',#2055,#2056,#2057);-#2055 = CARTESIAN_POINT('',(-3.205,-0.325,0.));-#2056 = DIRECTION('',(-0.,0.,1.));-#2057 = DIRECTION('',(1.,0.,0.));+#2055 = CARTESIAN_POINT('',(-2.634182274245,-0.475,0.217942023204));+#2056 = DIRECTION('',(-0.,-1.,-0.));+#2057 = DIRECTION('',(0.,0.,-1.)); #2058 = ADVANCED_FACE('',(#2059),#2065,.F.); #2059 = FACE_BOUND('',#2060,.F.); #2060 = EDGE_LOOP('',(#2061,#2062,#2063,#2064));-#2061 = ORIENTED_EDGE('',*,*,#1922,.T.);-#2062 = ORIENTED_EDGE('',*,*,#1945,.T.);-#2063 = ORIENTED_EDGE('',*,*,#2012,.F.);-#2064 = ORIENTED_EDGE('',*,*,#2046,.T.);+#2061 = ORIENTED_EDGE('',*,*,#1913,.F.);+#2062 = ORIENTED_EDGE('',*,*,#2048,.T.);+#2063 = ORIENTED_EDGE('',*,*,#1794,.T.);+#2064 = ORIENTED_EDGE('',*,*,#1883,.F.); #2065 = PLANE('',#2066); #2066 = AXIS2_PLACEMENT_3D('',#2067,#2068,#2069);-#2067 = CARTESIAN_POINT('',(-2.4875,-0.325,0.));-#2068 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#2069 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2067 = CARTESIAN_POINT('',(-2.15,-0.325,0.445));+#2068 = DIRECTION('',(-1.,0.,0.));+#2069 = DIRECTION('',(0.,0.,1.)); #2070 = MANIFOLD_SOLID_BREP('',#2071);-#2071 = CLOSED_SHELL('',(#2072,#2112,#2143,#2174,#2223,#2247,#2271,#2306- ,#2323,#2340));+#2071 = CLOSED_SHELL('',(#2072,#2112,#2175,#2206,#2230,#2254,#2278,#2302+ ,#2319,#2340)); #2072 = ADVANCED_FACE('',(#2073),#2107,.F.); #2073 = FACE_BOUND('',#2074,.F.); #2074 = EDGE_LOOP('',(#2075,#2085,#2093,#2101));@@ -2150,249 +2150,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #2109 = CARTESIAN_POINT('',(-2.15,-0.975,0.595)); #2110 = DIRECTION('',(-0.,-0.,-1.)); #2111 = DIRECTION('',(-1.,0.,0.));-#2112 = ADVANCED_FACE('',(#2113),#2138,.F.);+#2112 = ADVANCED_FACE('',(#2113),#2170,.F.); #2113 = FACE_BOUND('',#2114,.F.);-#2114 = EDGE_LOOP('',(#2115,#2125,#2131,#2132));-#2115 = ORIENTED_EDGE('',*,*,#2116,.F.);-#2116 = EDGE_CURVE('',#2117,#2119,#2121,.T.);-#2117 = VERTEX_POINT('',#2118);-#2118 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#2119 = VERTEX_POINT('',#2120);-#2120 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));-#2121 = LINE('',#2122,#2123);-#2122 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#2123 = VECTOR('',#2124,1.);-#2124 = DIRECTION('',(0.,1.,0.));-#2125 = ORIENTED_EDGE('',*,*,#2126,.T.);-#2126 = EDGE_CURVE('',#2117,#2077,#2127,.T.);-#2127 = LINE('',#2128,#2129);-#2128 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#2129 = VECTOR('',#2130,1.);-#2130 = DIRECTION('',(0.,0.,1.));-#2131 = ORIENTED_EDGE('',*,*,#2076,.T.);-#2132 = ORIENTED_EDGE('',*,*,#2133,.F.);-#2133 = EDGE_CURVE('',#2119,#2079,#2134,.T.);-#2134 = LINE('',#2135,#2136);-#2135 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));-#2136 = VECTOR('',#2137,1.);-#2137 = DIRECTION('',(0.,0.,1.));-#2138 = PLANE('',#2139);-#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);-#2140 = CARTESIAN_POINT('',(-2.15,-0.975,0.445));-#2141 = DIRECTION('',(-1.,0.,0.));-#2142 = DIRECTION('',(0.,0.,1.));-#2143 = ADVANCED_FACE('',(#2144),#2169,.F.);-#2144 = FACE_BOUND('',#2145,.F.);-#2145 = EDGE_LOOP('',(#2146,#2154,#2162,#2168));-#2146 = ORIENTED_EDGE('',*,*,#2147,.T.);-#2147 = EDGE_CURVE('',#2087,#2148,#2150,.T.);-#2148 = VERTEX_POINT('',#2149);-#2149 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));-#2150 = LINE('',#2151,#2152);-#2151 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));-#2152 = VECTOR('',#2153,1.);-#2153 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2154 = ORIENTED_EDGE('',*,*,#2155,.F.);-#2155 = EDGE_CURVE('',#2156,#2148,#2158,.T.);-#2156 = VERTEX_POINT('',#2157);-#2157 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));-#2158 = LINE('',#2159,#2160);-#2159 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));-#2160 = VECTOR('',#2161,1.);-#2161 = DIRECTION('',(0.,-1.,0.));-#2162 = ORIENTED_EDGE('',*,*,#2163,.F.);-#2163 = EDGE_CURVE('',#2095,#2156,#2164,.T.);-#2164 = LINE('',#2165,#2166);-#2165 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));-#2166 = VECTOR('',#2167,1.);-#2167 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2168 = ORIENTED_EDGE('',*,*,#2094,.T.);-#2169 = PLANE('',#2170);-#2170 = AXIS2_PLACEMENT_3D('',#2171,#2172,#2173);-#2171 = CARTESIAN_POINT('',(-2.35,-0.975,0.595));-#2172 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#2173 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2174 = ADVANCED_FACE('',(#2175),#2218,.T.);-#2175 = FACE_BOUND('',#2176,.T.);-#2176 = EDGE_LOOP('',(#2177,#2178,#2179,#2187,#2195,#2203,#2211,#2217));-#2177 = ORIENTED_EDGE('',*,*,#2086,.T.);-#2178 = ORIENTED_EDGE('',*,*,#2147,.T.);-#2179 = ORIENTED_EDGE('',*,*,#2180,.T.);-#2180 = EDGE_CURVE('',#2148,#2181,#2183,.T.);-#2181 = VERTEX_POINT('',#2182);-#2182 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));-#2183 = LINE('',#2184,#2185);-#2184 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));-#2185 = VECTOR('',#2186,1.);-#2186 = DIRECTION('',(-1.,0.,0.));-#2187 = ORIENTED_EDGE('',*,*,#2188,.T.);-#2188 = EDGE_CURVE('',#2181,#2189,#2191,.T.);-#2189 = VERTEX_POINT('',#2190);-#2190 = CARTESIAN_POINT('',(-3.205,-1.125,0.));-#2191 = LINE('',#2192,#2193);-#2192 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));-#2193 = VECTOR('',#2194,1.);-#2194 = DIRECTION('',(0.,0.,-1.));-#2195 = ORIENTED_EDGE('',*,*,#2196,.T.);-#2196 = EDGE_CURVE('',#2189,#2197,#2199,.T.);-#2197 = VERTEX_POINT('',#2198);-#2198 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));-#2199 = LINE('',#2200,#2201);-#2200 = CARTESIAN_POINT('',(-3.205,-1.125,0.));-#2201 = VECTOR('',#2202,1.);-#2202 = DIRECTION('',(1.,0.,0.));-#2203 = ORIENTED_EDGE('',*,*,#2204,.T.);-#2204 = EDGE_CURVE('',#2197,#2205,#2207,.T.);-#2205 = VERTEX_POINT('',#2206);-#2206 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));-#2207 = LINE('',#2208,#2209);-#2208 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));-#2209 = VECTOR('',#2210,1.);-#2210 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2211 = ORIENTED_EDGE('',*,*,#2212,.T.);-#2212 = EDGE_CURVE('',#2205,#2117,#2213,.T.);+#2114 = EDGE_LOOP('',(#2115,#2116,#2124,#2132,#2140,#2148,#2156,#2164));+#2115 = ORIENTED_EDGE('',*,*,#2102,.T.);+#2116 = ORIENTED_EDGE('',*,*,#2117,.T.);+#2117 = EDGE_CURVE('',#2095,#2118,#2120,.T.);+#2118 = VERTEX_POINT('',#2119);+#2119 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#2120 = LINE('',#2121,#2122);+#2121 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));+#2122 = VECTOR('',#2123,1.);+#2123 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2124 = ORIENTED_EDGE('',*,*,#2125,.T.);+#2125 = EDGE_CURVE('',#2118,#2126,#2128,.T.);+#2126 = VERTEX_POINT('',#2127);+#2127 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#2128 = LINE('',#2129,#2130);+#2129 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#2130 = VECTOR('',#2131,1.);+#2131 = DIRECTION('',(-1.,0.,0.));+#2132 = ORIENTED_EDGE('',*,*,#2133,.T.);+#2133 = EDGE_CURVE('',#2126,#2134,#2136,.T.);+#2134 = VERTEX_POINT('',#2135);+#2135 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#2136 = LINE('',#2137,#2138);+#2137 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#2138 = VECTOR('',#2139,1.);+#2139 = DIRECTION('',(0.,0.,-1.));+#2140 = ORIENTED_EDGE('',*,*,#2141,.T.);+#2141 = EDGE_CURVE('',#2134,#2142,#2144,.T.);+#2142 = VERTEX_POINT('',#2143);+#2143 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(1.,0.,0.));+#2148 = ORIENTED_EDGE('',*,*,#2149,.T.);+#2149 = EDGE_CURVE('',#2142,#2150,#2152,.T.);+#2150 = VERTEX_POINT('',#2151);+#2151 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2156 = ORIENTED_EDGE('',*,*,#2157,.T.);+#2157 = EDGE_CURVE('',#2150,#2158,#2160,.T.);+#2158 = VERTEX_POINT('',#2159);+#2159 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#2160 = LINE('',#2161,#2162);+#2161 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#2162 = VECTOR('',#2163,1.);+#2163 = DIRECTION('',(1.,0.,0.));+#2164 = ORIENTED_EDGE('',*,*,#2165,.T.);+#2165 = EDGE_CURVE('',#2158,#2079,#2166,.T.);+#2166 = LINE('',#2167,#2168);+#2167 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#2168 = VECTOR('',#2169,1.);+#2169 = DIRECTION('',(0.,0.,1.));+#2170 = PLANE('',#2171);+#2171 = AXIS2_PLACEMENT_3D('',#2172,#2173,#2174);+#2172 = CARTESIAN_POINT('',(-2.634182274245,-0.825,0.217942023204));+#2173 = DIRECTION('',(-0.,-1.,-0.));+#2174 = DIRECTION('',(0.,0.,-1.));+#2175 = ADVANCED_FACE('',(#2176),#2201,.F.);+#2176 = FACE_BOUND('',#2177,.F.);+#2177 = EDGE_LOOP('',(#2178,#2186,#2194,#2200));+#2178 = ORIENTED_EDGE('',*,*,#2179,.F.);+#2179 = EDGE_CURVE('',#2180,#2150,#2182,.T.);+#2180 = VERTEX_POINT('',#2181);+#2181 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#2182 = LINE('',#2183,#2184);+#2183 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#2184 = VECTOR('',#2185,1.);+#2185 = DIRECTION('',(0.,1.,0.));+#2186 = ORIENTED_EDGE('',*,*,#2187,.T.);+#2187 = EDGE_CURVE('',#2180,#2188,#2190,.T.);+#2188 = VERTEX_POINT('',#2189);+#2189 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#2190 = LINE('',#2191,#2192);+#2191 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#2192 = VECTOR('',#2193,1.);+#2193 = DIRECTION('',(1.,0.,0.));+#2194 = ORIENTED_EDGE('',*,*,#2195,.T.);+#2195 = EDGE_CURVE('',#2188,#2158,#2196,.T.);+#2196 = LINE('',#2197,#2198);+#2197 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#2198 = VECTOR('',#2199,1.);+#2199 = DIRECTION('',(0.,1.,0.));+#2200 = ORIENTED_EDGE('',*,*,#2157,.F.);+#2201 = PLANE('',#2202);+#2202 = AXIS2_PLACEMENT_3D('',#2203,#2204,#2205);+#2203 = CARTESIAN_POINT('',(-2.2,-0.975,0.445));+#2204 = DIRECTION('',(-0.,0.,1.));+#2205 = DIRECTION('',(1.,0.,0.));+#2206 = ADVANCED_FACE('',(#2207),#2225,.F.);+#2207 = FACE_BOUND('',#2208,.F.);+#2208 = EDGE_LOOP('',(#2209,#2217,#2218,#2219));+#2209 = ORIENTED_EDGE('',*,*,#2210,.T.);+#2210 = EDGE_CURVE('',#2211,#2180,#2213,.T.);+#2211 = VERTEX_POINT('',#2212);+#2212 = CARTESIAN_POINT('',(-2.4875,-1.125,0.)); #2213 = LINE('',#2214,#2215);-#2214 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#2214 = CARTESIAN_POINT('',(-2.4875,-1.125,0.)); #2215 = VECTOR('',#2216,1.);-#2216 = DIRECTION('',(1.,0.,0.));-#2217 = ORIENTED_EDGE('',*,*,#2126,.T.);-#2218 = PLANE('',#2219);-#2219 = AXIS2_PLACEMENT_3D('',#2220,#2221,#2222);-#2220 = CARTESIAN_POINT('',(-2.634182274245,-1.125,0.217942023204));-#2221 = DIRECTION('',(-0.,-1.,-0.));-#2222 = DIRECTION('',(0.,0.,-1.));-#2223 = ADVANCED_FACE('',(#2224),#2242,.F.);-#2224 = FACE_BOUND('',#2225,.F.);-#2225 = EDGE_LOOP('',(#2226,#2234,#2235,#2236));-#2226 = ORIENTED_EDGE('',*,*,#2227,.F.);-#2227 = EDGE_CURVE('',#2205,#2228,#2230,.T.);-#2228 = VERTEX_POINT('',#2229);-#2229 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));-#2230 = LINE('',#2231,#2232);-#2231 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));-#2232 = VECTOR('',#2233,1.);-#2233 = DIRECTION('',(0.,1.,0.));-#2234 = ORIENTED_EDGE('',*,*,#2212,.T.);-#2235 = ORIENTED_EDGE('',*,*,#2116,.T.);-#2236 = ORIENTED_EDGE('',*,*,#2237,.F.);-#2237 = EDGE_CURVE('',#2228,#2119,#2238,.T.);-#2238 = LINE('',#2239,#2240);-#2239 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));-#2240 = VECTOR('',#2241,1.);-#2241 = DIRECTION('',(1.,0.,0.));-#2242 = PLANE('',#2243);-#2243 = AXIS2_PLACEMENT_3D('',#2244,#2245,#2246);-#2244 = CARTESIAN_POINT('',(-2.2,-0.975,0.445));-#2245 = DIRECTION('',(-0.,0.,1.));-#2246 = DIRECTION('',(1.,0.,0.));-#2247 = ADVANCED_FACE('',(#2248),#2266,.F.);-#2248 = FACE_BOUND('',#2249,.F.);-#2249 = EDGE_LOOP('',(#2250,#2251,#2259,#2265));-#2250 = ORIENTED_EDGE('',*,*,#2180,.T.);-#2251 = ORIENTED_EDGE('',*,*,#2252,.F.);-#2252 = EDGE_CURVE('',#2253,#2181,#2255,.T.);-#2253 = VERTEX_POINT('',#2254);-#2254 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#2255 = LINE('',#2256,#2257);-#2256 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#2257 = VECTOR('',#2258,1.);-#2258 = DIRECTION('',(0.,-1.,0.));-#2259 = ORIENTED_EDGE('',*,*,#2260,.F.);-#2260 = EDGE_CURVE('',#2156,#2253,#2261,.T.);+#2216 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2217 = ORIENTED_EDGE('',*,*,#2179,.T.);+#2218 = ORIENTED_EDGE('',*,*,#2149,.F.);+#2219 = ORIENTED_EDGE('',*,*,#2220,.T.);+#2220 = EDGE_CURVE('',#2142,#2211,#2221,.T.);+#2221 = LINE('',#2222,#2223);+#2222 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#2223 = VECTOR('',#2224,1.);+#2224 = DIRECTION('',(0.,-1.,0.));+#2225 = PLANE('',#2226);+#2226 = AXIS2_PLACEMENT_3D('',#2227,#2228,#2229);+#2227 = CARTESIAN_POINT('',(-2.4875,-0.975,0.));+#2228 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2229 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2230 = ADVANCED_FACE('',(#2231),#2249,.F.);+#2231 = FACE_BOUND('',#2232,.F.);+#2232 = EDGE_LOOP('',(#2233,#2241,#2242,#2243));+#2233 = ORIENTED_EDGE('',*,*,#2234,.T.);+#2234 = EDGE_CURVE('',#2235,#2211,#2237,.T.);+#2235 = VERTEX_POINT('',#2236);+#2236 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#2237 = LINE('',#2238,#2239);+#2238 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#2239 = VECTOR('',#2240,1.);+#2240 = DIRECTION('',(1.,0.,0.));+#2241 = ORIENTED_EDGE('',*,*,#2220,.F.);+#2242 = ORIENTED_EDGE('',*,*,#2141,.F.);+#2243 = ORIENTED_EDGE('',*,*,#2244,.T.);+#2244 = EDGE_CURVE('',#2134,#2235,#2245,.T.);+#2245 = LINE('',#2246,#2247);+#2246 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#2247 = VECTOR('',#2248,1.);+#2248 = DIRECTION('',(0.,-1.,0.));+#2249 = PLANE('',#2250);+#2250 = AXIS2_PLACEMENT_3D('',#2251,#2252,#2253);+#2251 = CARTESIAN_POINT('',(-3.205,-0.975,0.));+#2252 = DIRECTION('',(-0.,0.,1.));+#2253 = DIRECTION('',(1.,0.,0.));+#2254 = ADVANCED_FACE('',(#2255),#2273,.F.);+#2255 = FACE_BOUND('',#2256,.F.);+#2256 = EDGE_LOOP('',(#2257,#2265,#2266,#2267));+#2257 = ORIENTED_EDGE('',*,*,#2258,.T.);+#2258 = EDGE_CURVE('',#2259,#2235,#2261,.T.);+#2259 = VERTEX_POINT('',#2260);+#2260 = CARTESIAN_POINT('',(-3.205,-1.125,0.15)); #2261 = LINE('',#2262,#2263);-#2262 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#2262 = CARTESIAN_POINT('',(-3.205,-1.125,0.15)); #2263 = VECTOR('',#2264,1.);-#2264 = DIRECTION('',(-1.,0.,0.));-#2265 = ORIENTED_EDGE('',*,*,#2155,.T.);-#2266 = PLANE('',#2267);-#2267 = AXIS2_PLACEMENT_3D('',#2268,#2269,#2270);-#2268 = CARTESIAN_POINT('',(-2.6375,-0.975,0.15));-#2269 = DIRECTION('',(-0.,-0.,-1.));-#2270 = DIRECTION('',(-1.,0.,0.));-#2271 = ADVANCED_FACE('',(#2272),#2301,.F.);-#2272 = FACE_BOUND('',#2273,.F.);-#2273 = EDGE_LOOP('',(#2274,#2275,#2276,#2277,#2285,#2293,#2299,#2300));-#2274 = ORIENTED_EDGE('',*,*,#2102,.T.);-#2275 = ORIENTED_EDGE('',*,*,#2163,.T.);-#2276 = ORIENTED_EDGE('',*,*,#2260,.T.);-#2277 = ORIENTED_EDGE('',*,*,#2278,.T.);-#2278 = EDGE_CURVE('',#2253,#2279,#2281,.T.);-#2279 = VERTEX_POINT('',#2280);-#2280 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#2281 = LINE('',#2282,#2283);-#2282 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#2283 = VECTOR('',#2284,1.);-#2284 = DIRECTION('',(0.,0.,-1.));-#2285 = ORIENTED_EDGE('',*,*,#2286,.T.);-#2286 = EDGE_CURVE('',#2279,#2287,#2289,.T.);-#2287 = VERTEX_POINT('',#2288);-#2288 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#2289 = LINE('',#2290,#2291);-#2290 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#2291 = VECTOR('',#2292,1.);-#2292 = DIRECTION('',(1.,0.,0.));-#2293 = ORIENTED_EDGE('',*,*,#2294,.T.);-#2294 = EDGE_CURVE('',#2287,#2228,#2295,.T.);-#2295 = LINE('',#2296,#2297);-#2296 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#2297 = VECTOR('',#2298,1.);-#2298 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2299 = ORIENTED_EDGE('',*,*,#2237,.T.);-#2300 = ORIENTED_EDGE('',*,*,#2133,.T.);-#2301 = PLANE('',#2302);-#2302 = AXIS2_PLACEMENT_3D('',#2303,#2304,#2305);-#2303 = CARTESIAN_POINT('',(-2.634182274245,-0.825,0.217942023204));-#2304 = DIRECTION('',(-0.,-1.,-0.));-#2305 = DIRECTION('',(0.,0.,-1.));-#2306 = ADVANCED_FACE('',(#2307),#2318,.F.);-#2307 = FACE_BOUND('',#2308,.F.);-#2308 = EDGE_LOOP('',(#2309,#2310,#2316,#2317));-#2309 = ORIENTED_EDGE('',*,*,#2188,.T.);-#2310 = ORIENTED_EDGE('',*,*,#2311,.F.);-#2311 = EDGE_CURVE('',#2279,#2189,#2312,.T.);-#2312 = LINE('',#2313,#2314);-#2313 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#2314 = VECTOR('',#2315,1.);-#2315 = DIRECTION('',(0.,-1.,0.));-#2316 = ORIENTED_EDGE('',*,*,#2278,.F.);-#2317 = ORIENTED_EDGE('',*,*,#2252,.T.);-#2318 = PLANE('',#2319);-#2319 = AXIS2_PLACEMENT_3D('',#2320,#2321,#2322);-#2320 = CARTESIAN_POINT('',(-3.205,-0.975,0.15));-#2321 = DIRECTION('',(1.,0.,0.));-#2322 = DIRECTION('',(0.,0.,-1.));-#2323 = ADVANCED_FACE('',(#2324),#2335,.F.);-#2324 = FACE_BOUND('',#2325,.F.);-#2325 = EDGE_LOOP('',(#2326,#2327,#2333,#2334));-#2326 = ORIENTED_EDGE('',*,*,#2196,.T.);-#2327 = ORIENTED_EDGE('',*,*,#2328,.F.);-#2328 = EDGE_CURVE('',#2287,#2197,#2329,.T.);-#2329 = LINE('',#2330,#2331);-#2330 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#2331 = VECTOR('',#2332,1.);-#2332 = DIRECTION('',(0.,-1.,0.));-#2333 = ORIENTED_EDGE('',*,*,#2286,.F.);-#2334 = ORIENTED_EDGE('',*,*,#2311,.T.);+#2264 = DIRECTION('',(0.,0.,-1.));+#2265 = ORIENTED_EDGE('',*,*,#2244,.F.);+#2266 = ORIENTED_EDGE('',*,*,#2133,.F.);+#2267 = ORIENTED_EDGE('',*,*,#2268,.T.);+#2268 = EDGE_CURVE('',#2126,#2259,#2269,.T.);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(0.,-1.,0.));+#2273 = PLANE('',#2274);+#2274 = AXIS2_PLACEMENT_3D('',#2275,#2276,#2277);+#2275 = CARTESIAN_POINT('',(-3.205,-0.975,0.15));+#2276 = DIRECTION('',(1.,0.,0.));+#2277 = DIRECTION('',(0.,0.,-1.));+#2278 = ADVANCED_FACE('',(#2279),#2297,.F.);+#2279 = FACE_BOUND('',#2280,.F.);+#2280 = EDGE_LOOP('',(#2281,#2289,#2290,#2291));+#2281 = ORIENTED_EDGE('',*,*,#2282,.T.);+#2282 = EDGE_CURVE('',#2283,#2259,#2285,.T.);+#2283 = VERTEX_POINT('',#2284);+#2284 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#2285 = LINE('',#2286,#2287);+#2286 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#2287 = VECTOR('',#2288,1.);+#2288 = DIRECTION('',(-1.,0.,0.));+#2289 = ORIENTED_EDGE('',*,*,#2268,.F.);+#2290 = ORIENTED_EDGE('',*,*,#2125,.F.);+#2291 = ORIENTED_EDGE('',*,*,#2292,.T.);+#2292 = EDGE_CURVE('',#2118,#2283,#2293,.T.);+#2293 = LINE('',#2294,#2295);+#2294 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#2295 = VECTOR('',#2296,1.);+#2296 = DIRECTION('',(0.,-1.,0.));+#2297 = PLANE('',#2298);+#2298 = AXIS2_PLACEMENT_3D('',#2299,#2300,#2301);+#2299 = CARTESIAN_POINT('',(-2.6375,-0.975,0.15));+#2300 = DIRECTION('',(-0.,-0.,-1.));+#2301 = DIRECTION('',(-1.,0.,0.));+#2302 = ADVANCED_FACE('',(#2303),#2314,.F.);+#2303 = FACE_BOUND('',#2304,.F.);+#2304 = EDGE_LOOP('',(#2305,#2311,#2312,#2313));+#2305 = ORIENTED_EDGE('',*,*,#2306,.T.);+#2306 = EDGE_CURVE('',#2087,#2283,#2307,.T.);+#2307 = LINE('',#2308,#2309);+#2308 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));+#2309 = VECTOR('',#2310,1.);+#2310 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2311 = ORIENTED_EDGE('',*,*,#2292,.F.);+#2312 = ORIENTED_EDGE('',*,*,#2117,.F.);+#2313 = ORIENTED_EDGE('',*,*,#2094,.T.);+#2314 = PLANE('',#2315);+#2315 = AXIS2_PLACEMENT_3D('',#2316,#2317,#2318);+#2316 = CARTESIAN_POINT('',(-2.35,-0.975,0.595));+#2317 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2318 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2319 = ADVANCED_FACE('',(#2320),#2335,.T.);+#2320 = FACE_BOUND('',#2321,.T.);+#2321 = EDGE_LOOP('',(#2322,#2323,#2324,#2325,#2326,#2327,#2328,#2329));+#2322 = ORIENTED_EDGE('',*,*,#2086,.T.);+#2323 = ORIENTED_EDGE('',*,*,#2306,.T.);+#2324 = ORIENTED_EDGE('',*,*,#2282,.T.);+#2325 = ORIENTED_EDGE('',*,*,#2258,.T.);+#2326 = ORIENTED_EDGE('',*,*,#2234,.T.);+#2327 = ORIENTED_EDGE('',*,*,#2210,.T.);+#2328 = ORIENTED_EDGE('',*,*,#2187,.T.);+#2329 = ORIENTED_EDGE('',*,*,#2330,.T.);+#2330 = EDGE_CURVE('',#2188,#2077,#2331,.T.);+#2331 = LINE('',#2332,#2333);+#2332 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#2333 = VECTOR('',#2334,1.);+#2334 = DIRECTION('',(0.,0.,1.)); #2335 = PLANE('',#2336); #2336 = AXIS2_PLACEMENT_3D('',#2337,#2338,#2339);-#2337 = CARTESIAN_POINT('',(-3.205,-0.975,0.));-#2338 = DIRECTION('',(-0.,0.,1.));-#2339 = DIRECTION('',(1.,0.,0.));+#2337 = CARTESIAN_POINT('',(-2.634182274245,-1.125,0.217942023204));+#2338 = DIRECTION('',(-0.,-1.,-0.));+#2339 = DIRECTION('',(0.,0.,-1.)); #2340 = ADVANCED_FACE('',(#2341),#2347,.F.); #2341 = FACE_BOUND('',#2342,.F.); #2342 = EDGE_LOOP('',(#2343,#2344,#2345,#2346));-#2343 = ORIENTED_EDGE('',*,*,#2204,.T.);-#2344 = ORIENTED_EDGE('',*,*,#2227,.T.);-#2345 = ORIENTED_EDGE('',*,*,#2294,.F.);-#2346 = ORIENTED_EDGE('',*,*,#2328,.T.);+#2343 = ORIENTED_EDGE('',*,*,#2195,.F.);+#2344 = ORIENTED_EDGE('',*,*,#2330,.T.);+#2345 = ORIENTED_EDGE('',*,*,#2076,.T.);+#2346 = ORIENTED_EDGE('',*,*,#2165,.F.); #2347 = PLANE('',#2348); #2348 = AXIS2_PLACEMENT_3D('',#2349,#2350,#2351);-#2349 = CARTESIAN_POINT('',(-2.4875,-0.975,0.));-#2350 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#2351 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2349 = CARTESIAN_POINT('',(-2.15,-0.975,0.445));+#2350 = DIRECTION('',(-1.,0.,0.));+#2351 = DIRECTION('',(0.,0.,1.)); #2352 = MANIFOLD_SOLID_BREP('',#2353);-#2353 = CLOSED_SHELL('',(#2354,#2394,#2425,#2456,#2505,#2529,#2553,#2588- ,#2605,#2622));+#2353 = CLOSED_SHELL('',(#2354,#2394,#2457,#2488,#2512,#2536,#2560,#2584+ ,#2601,#2622)); #2354 = ADVANCED_FACE('',(#2355),#2389,.F.); #2355 = FACE_BOUND('',#2356,.F.); #2356 = EDGE_LOOP('',(#2357,#2367,#2375,#2383));@@ -2433,249 +2433,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #2391 = CARTESIAN_POINT('',(-2.15,-1.625,0.595)); #2392 = DIRECTION('',(-0.,-0.,-1.)); #2393 = DIRECTION('',(-1.,0.,0.));-#2394 = ADVANCED_FACE('',(#2395),#2420,.F.);+#2394 = ADVANCED_FACE('',(#2395),#2452,.F.); #2395 = FACE_BOUND('',#2396,.F.);-#2396 = EDGE_LOOP('',(#2397,#2407,#2413,#2414));-#2397 = ORIENTED_EDGE('',*,*,#2398,.F.);-#2398 = EDGE_CURVE('',#2399,#2401,#2403,.T.);-#2399 = VERTEX_POINT('',#2400);-#2400 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#2401 = VERTEX_POINT('',#2402);-#2402 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));-#2403 = LINE('',#2404,#2405);-#2404 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#2405 = VECTOR('',#2406,1.);-#2406 = DIRECTION('',(0.,1.,0.));-#2407 = ORIENTED_EDGE('',*,*,#2408,.T.);-#2408 = EDGE_CURVE('',#2399,#2359,#2409,.T.);-#2409 = LINE('',#2410,#2411);-#2410 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#2411 = VECTOR('',#2412,1.);-#2412 = DIRECTION('',(0.,0.,1.));-#2413 = ORIENTED_EDGE('',*,*,#2358,.T.);-#2414 = ORIENTED_EDGE('',*,*,#2415,.F.);-#2415 = EDGE_CURVE('',#2401,#2361,#2416,.T.);-#2416 = LINE('',#2417,#2418);-#2417 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));-#2418 = VECTOR('',#2419,1.);-#2419 = DIRECTION('',(0.,0.,1.));-#2420 = PLANE('',#2421);-#2421 = AXIS2_PLACEMENT_3D('',#2422,#2423,#2424);-#2422 = CARTESIAN_POINT('',(-2.15,-1.625,0.445));-#2423 = DIRECTION('',(-1.,0.,0.));-#2424 = DIRECTION('',(0.,0.,1.));-#2425 = ADVANCED_FACE('',(#2426),#2451,.F.);-#2426 = FACE_BOUND('',#2427,.F.);-#2427 = EDGE_LOOP('',(#2428,#2436,#2444,#2450));-#2428 = ORIENTED_EDGE('',*,*,#2429,.T.);-#2429 = EDGE_CURVE('',#2369,#2430,#2432,.T.);-#2430 = VERTEX_POINT('',#2431);-#2431 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));-#2432 = LINE('',#2433,#2434);-#2433 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));-#2434 = VECTOR('',#2435,1.);-#2435 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2436 = ORIENTED_EDGE('',*,*,#2437,.F.);-#2437 = EDGE_CURVE('',#2438,#2430,#2440,.T.);-#2438 = VERTEX_POINT('',#2439);-#2439 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));-#2440 = LINE('',#2441,#2442);-#2441 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));-#2442 = VECTOR('',#2443,1.);-#2443 = DIRECTION('',(0.,-1.,0.));-#2444 = ORIENTED_EDGE('',*,*,#2445,.F.);-#2445 = EDGE_CURVE('',#2377,#2438,#2446,.T.);-#2446 = LINE('',#2447,#2448);-#2447 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));-#2448 = VECTOR('',#2449,1.);-#2449 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2450 = ORIENTED_EDGE('',*,*,#2376,.T.);-#2451 = PLANE('',#2452);-#2452 = AXIS2_PLACEMENT_3D('',#2453,#2454,#2455);-#2453 = CARTESIAN_POINT('',(-2.35,-1.625,0.595));-#2454 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#2455 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2456 = ADVANCED_FACE('',(#2457),#2500,.T.);-#2457 = FACE_BOUND('',#2458,.T.);-#2458 = EDGE_LOOP('',(#2459,#2460,#2461,#2469,#2477,#2485,#2493,#2499));-#2459 = ORIENTED_EDGE('',*,*,#2368,.T.);-#2460 = ORIENTED_EDGE('',*,*,#2429,.T.);-#2461 = ORIENTED_EDGE('',*,*,#2462,.T.);-#2462 = EDGE_CURVE('',#2430,#2463,#2465,.T.);-#2463 = VERTEX_POINT('',#2464);-#2464 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));-#2465 = LINE('',#2466,#2467);-#2466 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));-#2467 = VECTOR('',#2468,1.);-#2468 = DIRECTION('',(-1.,0.,0.));-#2469 = ORIENTED_EDGE('',*,*,#2470,.T.);-#2470 = EDGE_CURVE('',#2463,#2471,#2473,.T.);-#2471 = VERTEX_POINT('',#2472);-#2472 = CARTESIAN_POINT('',(-3.205,-1.775,0.));-#2473 = LINE('',#2474,#2475);-#2474 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));-#2475 = VECTOR('',#2476,1.);-#2476 = DIRECTION('',(0.,0.,-1.));-#2477 = ORIENTED_EDGE('',*,*,#2478,.T.);-#2478 = EDGE_CURVE('',#2471,#2479,#2481,.T.);-#2479 = VERTEX_POINT('',#2480);-#2480 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));-#2481 = LINE('',#2482,#2483);-#2482 = CARTESIAN_POINT('',(-3.205,-1.775,0.));-#2483 = VECTOR('',#2484,1.);-#2484 = DIRECTION('',(1.,0.,0.));-#2485 = ORIENTED_EDGE('',*,*,#2486,.T.);-#2486 = EDGE_CURVE('',#2479,#2487,#2489,.T.);-#2487 = VERTEX_POINT('',#2488);-#2488 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));-#2489 = LINE('',#2490,#2491);-#2490 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));-#2491 = VECTOR('',#2492,1.);-#2492 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2493 = ORIENTED_EDGE('',*,*,#2494,.T.);-#2494 = EDGE_CURVE('',#2487,#2399,#2495,.T.);+#2396 = EDGE_LOOP('',(#2397,#2398,#2406,#2414,#2422,#2430,#2438,#2446));+#2397 = ORIENTED_EDGE('',*,*,#2384,.T.);+#2398 = ORIENTED_EDGE('',*,*,#2399,.T.);+#2399 = EDGE_CURVE('',#2377,#2400,#2402,.T.);+#2400 = VERTEX_POINT('',#2401);+#2401 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#2402 = LINE('',#2403,#2404);+#2403 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));+#2404 = VECTOR('',#2405,1.);+#2405 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2406 = ORIENTED_EDGE('',*,*,#2407,.T.);+#2407 = EDGE_CURVE('',#2400,#2408,#2410,.T.);+#2408 = VERTEX_POINT('',#2409);+#2409 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#2410 = LINE('',#2411,#2412);+#2411 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#2412 = VECTOR('',#2413,1.);+#2413 = DIRECTION('',(-1.,0.,0.));+#2414 = ORIENTED_EDGE('',*,*,#2415,.T.);+#2415 = EDGE_CURVE('',#2408,#2416,#2418,.T.);+#2416 = VERTEX_POINT('',#2417);+#2417 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#2418 = LINE('',#2419,#2420);+#2419 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#2420 = VECTOR('',#2421,1.);+#2421 = DIRECTION('',(0.,0.,-1.));+#2422 = ORIENTED_EDGE('',*,*,#2423,.T.);+#2423 = EDGE_CURVE('',#2416,#2424,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#2426 = LINE('',#2427,#2428);+#2427 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#2428 = VECTOR('',#2429,1.);+#2429 = DIRECTION('',(1.,0.,0.));+#2430 = ORIENTED_EDGE('',*,*,#2431,.T.);+#2431 = EDGE_CURVE('',#2424,#2432,#2434,.T.);+#2432 = VERTEX_POINT('',#2433);+#2433 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#2434 = LINE('',#2435,#2436);+#2435 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#2436 = VECTOR('',#2437,1.);+#2437 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2438 = ORIENTED_EDGE('',*,*,#2439,.T.);+#2439 = EDGE_CURVE('',#2432,#2440,#2442,.T.);+#2440 = VERTEX_POINT('',#2441);+#2441 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#2442 = LINE('',#2443,#2444);+#2443 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#2444 = VECTOR('',#2445,1.);+#2445 = DIRECTION('',(1.,0.,0.));+#2446 = ORIENTED_EDGE('',*,*,#2447,.T.);+#2447 = EDGE_CURVE('',#2440,#2361,#2448,.T.);+#2448 = LINE('',#2449,#2450);+#2449 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#2450 = VECTOR('',#2451,1.);+#2451 = DIRECTION('',(0.,0.,1.));+#2452 = PLANE('',#2453);+#2453 = AXIS2_PLACEMENT_3D('',#2454,#2455,#2456);+#2454 = CARTESIAN_POINT('',(-2.634182274245,-1.475,0.217942023204));+#2455 = DIRECTION('',(-0.,-1.,-0.));+#2456 = DIRECTION('',(0.,0.,-1.));+#2457 = ADVANCED_FACE('',(#2458),#2483,.F.);+#2458 = FACE_BOUND('',#2459,.F.);+#2459 = EDGE_LOOP('',(#2460,#2468,#2476,#2482));+#2460 = ORIENTED_EDGE('',*,*,#2461,.F.);+#2461 = EDGE_CURVE('',#2462,#2432,#2464,.T.);+#2462 = VERTEX_POINT('',#2463);+#2463 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.,0.));+#2468 = ORIENTED_EDGE('',*,*,#2469,.T.);+#2469 = EDGE_CURVE('',#2462,#2470,#2472,.T.);+#2470 = VERTEX_POINT('',#2471);+#2471 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#2472 = LINE('',#2473,#2474);+#2473 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#2474 = VECTOR('',#2475,1.);+#2475 = DIRECTION('',(1.,0.,0.));+#2476 = ORIENTED_EDGE('',*,*,#2477,.T.);+#2477 = EDGE_CURVE('',#2470,#2440,#2478,.T.);+#2478 = LINE('',#2479,#2480);+#2479 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#2480 = VECTOR('',#2481,1.);+#2481 = DIRECTION('',(0.,1.,0.));+#2482 = ORIENTED_EDGE('',*,*,#2439,.F.);+#2483 = PLANE('',#2484);+#2484 = AXIS2_PLACEMENT_3D('',#2485,#2486,#2487);+#2485 = CARTESIAN_POINT('',(-2.2,-1.625,0.445));+#2486 = DIRECTION('',(-0.,0.,1.));+#2487 = DIRECTION('',(1.,0.,0.));+#2488 = ADVANCED_FACE('',(#2489),#2507,.F.);+#2489 = FACE_BOUND('',#2490,.F.);+#2490 = EDGE_LOOP('',(#2491,#2499,#2500,#2501));+#2491 = ORIENTED_EDGE('',*,*,#2492,.T.);+#2492 = EDGE_CURVE('',#2493,#2462,#2495,.T.);+#2493 = VERTEX_POINT('',#2494);+#2494 = CARTESIAN_POINT('',(-2.4875,-1.775,0.)); #2495 = LINE('',#2496,#2497);-#2496 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#2496 = CARTESIAN_POINT('',(-2.4875,-1.775,0.)); #2497 = VECTOR('',#2498,1.);-#2498 = DIRECTION('',(1.,0.,0.));-#2499 = ORIENTED_EDGE('',*,*,#2408,.T.);-#2500 = PLANE('',#2501);-#2501 = AXIS2_PLACEMENT_3D('',#2502,#2503,#2504);-#2502 = CARTESIAN_POINT('',(-2.634182274245,-1.775,0.217942023204));-#2503 = DIRECTION('',(-0.,-1.,-0.));-#2504 = DIRECTION('',(0.,0.,-1.));-#2505 = ADVANCED_FACE('',(#2506),#2524,.F.);-#2506 = FACE_BOUND('',#2507,.F.);-#2507 = EDGE_LOOP('',(#2508,#2516,#2517,#2518));-#2508 = ORIENTED_EDGE('',*,*,#2509,.F.);-#2509 = EDGE_CURVE('',#2487,#2510,#2512,.T.);-#2510 = VERTEX_POINT('',#2511);-#2511 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));-#2512 = LINE('',#2513,#2514);-#2513 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));-#2514 = VECTOR('',#2515,1.);-#2515 = DIRECTION('',(0.,1.,0.));-#2516 = ORIENTED_EDGE('',*,*,#2494,.T.);-#2517 = ORIENTED_EDGE('',*,*,#2398,.T.);-#2518 = ORIENTED_EDGE('',*,*,#2519,.F.);-#2519 = EDGE_CURVE('',#2510,#2401,#2520,.T.);-#2520 = LINE('',#2521,#2522);-#2521 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));-#2522 = VECTOR('',#2523,1.);-#2523 = DIRECTION('',(1.,0.,0.));-#2524 = PLANE('',#2525);-#2525 = AXIS2_PLACEMENT_3D('',#2526,#2527,#2528);-#2526 = CARTESIAN_POINT('',(-2.2,-1.625,0.445));-#2527 = DIRECTION('',(-0.,0.,1.));-#2528 = DIRECTION('',(1.,0.,0.));-#2529 = ADVANCED_FACE('',(#2530),#2548,.F.);-#2530 = FACE_BOUND('',#2531,.F.);-#2531 = EDGE_LOOP('',(#2532,#2533,#2541,#2547));-#2532 = ORIENTED_EDGE('',*,*,#2462,.T.);-#2533 = ORIENTED_EDGE('',*,*,#2534,.F.);-#2534 = EDGE_CURVE('',#2535,#2463,#2537,.T.);-#2535 = VERTEX_POINT('',#2536);-#2536 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#2537 = LINE('',#2538,#2539);-#2538 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#2539 = VECTOR('',#2540,1.);-#2540 = DIRECTION('',(0.,-1.,0.));-#2541 = ORIENTED_EDGE('',*,*,#2542,.F.);-#2542 = EDGE_CURVE('',#2438,#2535,#2543,.T.);+#2498 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2499 = ORIENTED_EDGE('',*,*,#2461,.T.);+#2500 = ORIENTED_EDGE('',*,*,#2431,.F.);+#2501 = ORIENTED_EDGE('',*,*,#2502,.T.);+#2502 = EDGE_CURVE('',#2424,#2493,#2503,.T.);+#2503 = LINE('',#2504,#2505);+#2504 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#2505 = VECTOR('',#2506,1.);+#2506 = DIRECTION('',(0.,-1.,0.));+#2507 = PLANE('',#2508);+#2508 = AXIS2_PLACEMENT_3D('',#2509,#2510,#2511);+#2509 = CARTESIAN_POINT('',(-2.4875,-1.625,0.));+#2510 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2511 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2512 = ADVANCED_FACE('',(#2513),#2531,.F.);+#2513 = FACE_BOUND('',#2514,.F.);+#2514 = EDGE_LOOP('',(#2515,#2523,#2524,#2525));+#2515 = ORIENTED_EDGE('',*,*,#2516,.T.);+#2516 = EDGE_CURVE('',#2517,#2493,#2519,.T.);+#2517 = VERTEX_POINT('',#2518);+#2518 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#2519 = LINE('',#2520,#2521);+#2520 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#2521 = VECTOR('',#2522,1.);+#2522 = DIRECTION('',(1.,0.,0.));+#2523 = ORIENTED_EDGE('',*,*,#2502,.F.);+#2524 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2525 = ORIENTED_EDGE('',*,*,#2526,.T.);+#2526 = EDGE_CURVE('',#2416,#2517,#2527,.T.);+#2527 = LINE('',#2528,#2529);+#2528 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#2529 = VECTOR('',#2530,1.);+#2530 = DIRECTION('',(0.,-1.,0.));+#2531 = PLANE('',#2532);+#2532 = AXIS2_PLACEMENT_3D('',#2533,#2534,#2535);+#2533 = CARTESIAN_POINT('',(-3.205,-1.625,0.));+#2534 = DIRECTION('',(-0.,0.,1.));+#2535 = DIRECTION('',(1.,0.,0.));+#2536 = ADVANCED_FACE('',(#2537),#2555,.F.);+#2537 = FACE_BOUND('',#2538,.F.);+#2538 = EDGE_LOOP('',(#2539,#2547,#2548,#2549));+#2539 = ORIENTED_EDGE('',*,*,#2540,.T.);+#2540 = EDGE_CURVE('',#2541,#2517,#2543,.T.);+#2541 = VERTEX_POINT('',#2542);+#2542 = CARTESIAN_POINT('',(-3.205,-1.775,0.15)); #2543 = LINE('',#2544,#2545);-#2544 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#2544 = CARTESIAN_POINT('',(-3.205,-1.775,0.15)); #2545 = VECTOR('',#2546,1.);-#2546 = DIRECTION('',(-1.,0.,0.));-#2547 = ORIENTED_EDGE('',*,*,#2437,.T.);-#2548 = PLANE('',#2549);-#2549 = AXIS2_PLACEMENT_3D('',#2550,#2551,#2552);-#2550 = CARTESIAN_POINT('',(-2.6375,-1.625,0.15));-#2551 = DIRECTION('',(-0.,-0.,-1.));-#2552 = DIRECTION('',(-1.,0.,0.));-#2553 = ADVANCED_FACE('',(#2554),#2583,.F.);-#2554 = FACE_BOUND('',#2555,.F.);-#2555 = EDGE_LOOP('',(#2556,#2557,#2558,#2559,#2567,#2575,#2581,#2582));-#2556 = ORIENTED_EDGE('',*,*,#2384,.T.);-#2557 = ORIENTED_EDGE('',*,*,#2445,.T.);-#2558 = ORIENTED_EDGE('',*,*,#2542,.T.);-#2559 = ORIENTED_EDGE('',*,*,#2560,.T.);-#2560 = EDGE_CURVE('',#2535,#2561,#2563,.T.);-#2561 = VERTEX_POINT('',#2562);-#2562 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#2563 = LINE('',#2564,#2565);-#2564 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#2565 = VECTOR('',#2566,1.);-#2566 = DIRECTION('',(0.,0.,-1.));-#2567 = ORIENTED_EDGE('',*,*,#2568,.T.);-#2568 = EDGE_CURVE('',#2561,#2569,#2571,.T.);-#2569 = VERTEX_POINT('',#2570);-#2570 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#2571 = LINE('',#2572,#2573);-#2572 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#2573 = VECTOR('',#2574,1.);-#2574 = DIRECTION('',(1.,0.,0.));-#2575 = ORIENTED_EDGE('',*,*,#2576,.T.);-#2576 = EDGE_CURVE('',#2569,#2510,#2577,.T.);-#2577 = LINE('',#2578,#2579);-#2578 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#2579 = VECTOR('',#2580,1.);-#2580 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2581 = ORIENTED_EDGE('',*,*,#2519,.T.);-#2582 = ORIENTED_EDGE('',*,*,#2415,.T.);-#2583 = PLANE('',#2584);-#2584 = AXIS2_PLACEMENT_3D('',#2585,#2586,#2587);-#2585 = CARTESIAN_POINT('',(-2.634182274245,-1.475,0.217942023204));-#2586 = DIRECTION('',(-0.,-1.,-0.));-#2587 = DIRECTION('',(0.,0.,-1.));-#2588 = ADVANCED_FACE('',(#2589),#2600,.F.);-#2589 = FACE_BOUND('',#2590,.F.);-#2590 = EDGE_LOOP('',(#2591,#2592,#2598,#2599));-#2591 = ORIENTED_EDGE('',*,*,#2470,.T.);-#2592 = ORIENTED_EDGE('',*,*,#2593,.F.);-#2593 = EDGE_CURVE('',#2561,#2471,#2594,.T.);-#2594 = LINE('',#2595,#2596);-#2595 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#2596 = VECTOR('',#2597,1.);-#2597 = DIRECTION('',(0.,-1.,0.));-#2598 = ORIENTED_EDGE('',*,*,#2560,.F.);-#2599 = ORIENTED_EDGE('',*,*,#2534,.T.);-#2600 = PLANE('',#2601);-#2601 = AXIS2_PLACEMENT_3D('',#2602,#2603,#2604);-#2602 = CARTESIAN_POINT('',(-3.205,-1.625,0.15));-#2603 = DIRECTION('',(1.,0.,0.));-#2604 = DIRECTION('',(0.,0.,-1.));-#2605 = ADVANCED_FACE('',(#2606),#2617,.F.);-#2606 = FACE_BOUND('',#2607,.F.);-#2607 = EDGE_LOOP('',(#2608,#2609,#2615,#2616));-#2608 = ORIENTED_EDGE('',*,*,#2478,.T.);-#2609 = ORIENTED_EDGE('',*,*,#2610,.F.);-#2610 = EDGE_CURVE('',#2569,#2479,#2611,.T.);-#2611 = LINE('',#2612,#2613);-#2612 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#2613 = VECTOR('',#2614,1.);-#2614 = DIRECTION('',(0.,-1.,0.));-#2615 = ORIENTED_EDGE('',*,*,#2568,.F.);-#2616 = ORIENTED_EDGE('',*,*,#2593,.T.);+#2546 = DIRECTION('',(0.,0.,-1.));+#2547 = ORIENTED_EDGE('',*,*,#2526,.F.);+#2548 = ORIENTED_EDGE('',*,*,#2415,.F.);+#2549 = ORIENTED_EDGE('',*,*,#2550,.T.);+#2550 = EDGE_CURVE('',#2408,#2541,#2551,.T.);+#2551 = LINE('',#2552,#2553);+#2552 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#2553 = VECTOR('',#2554,1.);+#2554 = DIRECTION('',(0.,-1.,0.));+#2555 = PLANE('',#2556);+#2556 = AXIS2_PLACEMENT_3D('',#2557,#2558,#2559);+#2557 = CARTESIAN_POINT('',(-3.205,-1.625,0.15));+#2558 = DIRECTION('',(1.,0.,0.));+#2559 = DIRECTION('',(0.,0.,-1.));+#2560 = ADVANCED_FACE('',(#2561),#2579,.F.);+#2561 = FACE_BOUND('',#2562,.F.);+#2562 = EDGE_LOOP('',(#2563,#2571,#2572,#2573));+#2563 = ORIENTED_EDGE('',*,*,#2564,.T.);+#2564 = EDGE_CURVE('',#2565,#2541,#2567,.T.);+#2565 = VERTEX_POINT('',#2566);+#2566 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#2567 = LINE('',#2568,#2569);+#2568 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#2569 = VECTOR('',#2570,1.);+#2570 = DIRECTION('',(-1.,0.,0.));+#2571 = ORIENTED_EDGE('',*,*,#2550,.F.);+#2572 = ORIENTED_EDGE('',*,*,#2407,.F.);+#2573 = ORIENTED_EDGE('',*,*,#2574,.T.);+#2574 = EDGE_CURVE('',#2400,#2565,#2575,.T.);+#2575 = LINE('',#2576,#2577);+#2576 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#2577 = VECTOR('',#2578,1.);+#2578 = DIRECTION('',(0.,-1.,0.));+#2579 = PLANE('',#2580);+#2580 = AXIS2_PLACEMENT_3D('',#2581,#2582,#2583);+#2581 = CARTESIAN_POINT('',(-2.6375,-1.625,0.15));+#2582 = DIRECTION('',(-0.,-0.,-1.));+#2583 = DIRECTION('',(-1.,0.,0.));+#2584 = ADVANCED_FACE('',(#2585),#2596,.F.);+#2585 = FACE_BOUND('',#2586,.F.);+#2586 = EDGE_LOOP('',(#2587,#2593,#2594,#2595));+#2587 = ORIENTED_EDGE('',*,*,#2588,.T.);+#2588 = EDGE_CURVE('',#2369,#2565,#2589,.T.);+#2589 = LINE('',#2590,#2591);+#2590 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));+#2591 = VECTOR('',#2592,1.);+#2592 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2593 = ORIENTED_EDGE('',*,*,#2574,.F.);+#2594 = ORIENTED_EDGE('',*,*,#2399,.F.);+#2595 = ORIENTED_EDGE('',*,*,#2376,.T.);+#2596 = PLANE('',#2597);+#2597 = AXIS2_PLACEMENT_3D('',#2598,#2599,#2600);+#2598 = CARTESIAN_POINT('',(-2.35,-1.625,0.595));+#2599 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2600 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2601 = ADVANCED_FACE('',(#2602),#2617,.T.);+#2602 = FACE_BOUND('',#2603,.T.);+#2603 = EDGE_LOOP('',(#2604,#2605,#2606,#2607,#2608,#2609,#2610,#2611));+#2604 = ORIENTED_EDGE('',*,*,#2368,.T.);+#2605 = ORIENTED_EDGE('',*,*,#2588,.T.);+#2606 = ORIENTED_EDGE('',*,*,#2564,.T.);+#2607 = ORIENTED_EDGE('',*,*,#2540,.T.);+#2608 = ORIENTED_EDGE('',*,*,#2516,.T.);+#2609 = ORIENTED_EDGE('',*,*,#2492,.T.);+#2610 = ORIENTED_EDGE('',*,*,#2469,.T.);+#2611 = ORIENTED_EDGE('',*,*,#2612,.T.);+#2612 = EDGE_CURVE('',#2470,#2359,#2613,.T.);+#2613 = LINE('',#2614,#2615);+#2614 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#2615 = VECTOR('',#2616,1.);+#2616 = DIRECTION('',(0.,0.,1.)); #2617 = PLANE('',#2618); #2618 = AXIS2_PLACEMENT_3D('',#2619,#2620,#2621);-#2619 = CARTESIAN_POINT('',(-3.205,-1.625,0.));-#2620 = DIRECTION('',(-0.,0.,1.));-#2621 = DIRECTION('',(1.,0.,0.));+#2619 = CARTESIAN_POINT('',(-2.634182274245,-1.775,0.217942023204));+#2620 = DIRECTION('',(-0.,-1.,-0.));+#2621 = DIRECTION('',(0.,0.,-1.)); #2622 = ADVANCED_FACE('',(#2623),#2629,.F.); #2623 = FACE_BOUND('',#2624,.F.); #2624 = EDGE_LOOP('',(#2625,#2626,#2627,#2628));-#2625 = ORIENTED_EDGE('',*,*,#2486,.T.);-#2626 = ORIENTED_EDGE('',*,*,#2509,.T.);-#2627 = ORIENTED_EDGE('',*,*,#2576,.F.);-#2628 = ORIENTED_EDGE('',*,*,#2610,.T.);+#2625 = ORIENTED_EDGE('',*,*,#2477,.F.);+#2626 = ORIENTED_EDGE('',*,*,#2612,.T.);+#2627 = ORIENTED_EDGE('',*,*,#2358,.T.);+#2628 = ORIENTED_EDGE('',*,*,#2447,.F.); #2629 = PLANE('',#2630); #2630 = AXIS2_PLACEMENT_3D('',#2631,#2632,#2633);-#2631 = CARTESIAN_POINT('',(-2.4875,-1.625,0.));-#2632 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#2633 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2631 = CARTESIAN_POINT('',(-2.15,-1.625,0.445));+#2632 = DIRECTION('',(-1.,0.,0.));+#2633 = DIRECTION('',(0.,0.,1.)); #2634 = MANIFOLD_SOLID_BREP('',#2635);-#2635 = CLOSED_SHELL('',(#2636,#2676,#2707,#2738,#2787,#2811,#2835,#2870- ,#2887,#2904));+#2635 = CLOSED_SHELL('',(#2636,#2676,#2739,#2770,#2794,#2818,#2842,#2866+ ,#2883,#2904)); #2636 = ADVANCED_FACE('',(#2637),#2671,.F.); #2637 = FACE_BOUND('',#2638,.F.); #2638 = EDGE_LOOP('',(#2639,#2649,#2657,#2665));@@ -2716,249 +2716,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #2673 = CARTESIAN_POINT('',(-2.15,-2.275,0.595)); #2674 = DIRECTION('',(-0.,-0.,-1.)); #2675 = DIRECTION('',(-1.,0.,0.));-#2676 = ADVANCED_FACE('',(#2677),#2702,.F.);+#2676 = ADVANCED_FACE('',(#2677),#2734,.F.); #2677 = FACE_BOUND('',#2678,.F.);-#2678 = EDGE_LOOP('',(#2679,#2689,#2695,#2696));-#2679 = ORIENTED_EDGE('',*,*,#2680,.F.);-#2680 = EDGE_CURVE('',#2681,#2683,#2685,.T.);-#2681 = VERTEX_POINT('',#2682);-#2682 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#2683 = VERTEX_POINT('',#2684);-#2684 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));-#2685 = LINE('',#2686,#2687);-#2686 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#2687 = VECTOR('',#2688,1.);-#2688 = DIRECTION('',(0.,1.,0.));-#2689 = ORIENTED_EDGE('',*,*,#2690,.T.);-#2690 = EDGE_CURVE('',#2681,#2641,#2691,.T.);-#2691 = LINE('',#2692,#2693);-#2692 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#2693 = VECTOR('',#2694,1.);-#2694 = DIRECTION('',(0.,0.,1.));-#2695 = ORIENTED_EDGE('',*,*,#2640,.T.);-#2696 = ORIENTED_EDGE('',*,*,#2697,.F.);-#2697 = EDGE_CURVE('',#2683,#2643,#2698,.T.);-#2698 = LINE('',#2699,#2700);-#2699 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));-#2700 = VECTOR('',#2701,1.);-#2701 = DIRECTION('',(0.,0.,1.));-#2702 = PLANE('',#2703);-#2703 = AXIS2_PLACEMENT_3D('',#2704,#2705,#2706);-#2704 = CARTESIAN_POINT('',(-2.15,-2.275,0.445));-#2705 = DIRECTION('',(-1.,0.,0.));-#2706 = DIRECTION('',(0.,0.,1.));-#2707 = ADVANCED_FACE('',(#2708),#2733,.F.);-#2708 = FACE_BOUND('',#2709,.F.);-#2709 = EDGE_LOOP('',(#2710,#2718,#2726,#2732));-#2710 = ORIENTED_EDGE('',*,*,#2711,.T.);-#2711 = EDGE_CURVE('',#2651,#2712,#2714,.T.);-#2712 = VERTEX_POINT('',#2713);-#2713 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));-#2714 = LINE('',#2715,#2716);-#2715 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));-#2716 = VECTOR('',#2717,1.);-#2717 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2718 = ORIENTED_EDGE('',*,*,#2719,.F.);-#2719 = EDGE_CURVE('',#2720,#2712,#2722,.T.);-#2720 = VERTEX_POINT('',#2721);-#2721 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));-#2722 = LINE('',#2723,#2724);-#2723 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));-#2724 = VECTOR('',#2725,1.);-#2725 = DIRECTION('',(0.,-1.,0.));-#2726 = ORIENTED_EDGE('',*,*,#2727,.F.);-#2727 = EDGE_CURVE('',#2659,#2720,#2728,.T.);-#2728 = LINE('',#2729,#2730);-#2729 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));-#2730 = VECTOR('',#2731,1.);-#2731 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2732 = ORIENTED_EDGE('',*,*,#2658,.T.);-#2733 = PLANE('',#2734);-#2734 = AXIS2_PLACEMENT_3D('',#2735,#2736,#2737);-#2735 = CARTESIAN_POINT('',(-2.35,-2.275,0.595));-#2736 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#2737 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2738 = ADVANCED_FACE('',(#2739),#2782,.T.);-#2739 = FACE_BOUND('',#2740,.T.);-#2740 = EDGE_LOOP('',(#2741,#2742,#2743,#2751,#2759,#2767,#2775,#2781));-#2741 = ORIENTED_EDGE('',*,*,#2650,.T.);-#2742 = ORIENTED_EDGE('',*,*,#2711,.T.);-#2743 = ORIENTED_EDGE('',*,*,#2744,.T.);-#2744 = EDGE_CURVE('',#2712,#2745,#2747,.T.);-#2745 = VERTEX_POINT('',#2746);-#2746 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));-#2747 = LINE('',#2748,#2749);-#2748 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));-#2749 = VECTOR('',#2750,1.);-#2750 = DIRECTION('',(-1.,0.,0.));-#2751 = ORIENTED_EDGE('',*,*,#2752,.T.);-#2752 = EDGE_CURVE('',#2745,#2753,#2755,.T.);-#2753 = VERTEX_POINT('',#2754);-#2754 = CARTESIAN_POINT('',(-3.205,-2.425,0.));-#2755 = LINE('',#2756,#2757);-#2756 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));-#2757 = VECTOR('',#2758,1.);-#2758 = DIRECTION('',(0.,0.,-1.));-#2759 = ORIENTED_EDGE('',*,*,#2760,.T.);-#2760 = EDGE_CURVE('',#2753,#2761,#2763,.T.);-#2761 = VERTEX_POINT('',#2762);-#2762 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));-#2763 = LINE('',#2764,#2765);-#2764 = CARTESIAN_POINT('',(-3.205,-2.425,0.));-#2765 = VECTOR('',#2766,1.);-#2766 = DIRECTION('',(1.,0.,0.));-#2767 = ORIENTED_EDGE('',*,*,#2768,.T.);-#2768 = EDGE_CURVE('',#2761,#2769,#2771,.T.);-#2769 = VERTEX_POINT('',#2770);-#2770 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));-#2771 = LINE('',#2772,#2773);-#2772 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));-#2773 = VECTOR('',#2774,1.);-#2774 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2775 = ORIENTED_EDGE('',*,*,#2776,.T.);-#2776 = EDGE_CURVE('',#2769,#2681,#2777,.T.);+#2678 = EDGE_LOOP('',(#2679,#2680,#2688,#2696,#2704,#2712,#2720,#2728));+#2679 = ORIENTED_EDGE('',*,*,#2666,.T.);+#2680 = ORIENTED_EDGE('',*,*,#2681,.T.);+#2681 = EDGE_CURVE('',#2659,#2682,#2684,.T.);+#2682 = VERTEX_POINT('',#2683);+#2683 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#2684 = LINE('',#2685,#2686);+#2685 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));+#2686 = VECTOR('',#2687,1.);+#2687 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2688 = ORIENTED_EDGE('',*,*,#2689,.T.);+#2689 = EDGE_CURVE('',#2682,#2690,#2692,.T.);+#2690 = VERTEX_POINT('',#2691);+#2691 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#2692 = LINE('',#2693,#2694);+#2693 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#2694 = VECTOR('',#2695,1.);+#2695 = DIRECTION('',(-1.,0.,0.));+#2696 = ORIENTED_EDGE('',*,*,#2697,.T.);+#2697 = EDGE_CURVE('',#2690,#2698,#2700,.T.);+#2698 = VERTEX_POINT('',#2699);+#2699 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#2700 = LINE('',#2701,#2702);+#2701 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#2702 = VECTOR('',#2703,1.);+#2703 = DIRECTION('',(0.,0.,-1.));+#2704 = ORIENTED_EDGE('',*,*,#2705,.T.);+#2705 = EDGE_CURVE('',#2698,#2706,#2708,.T.);+#2706 = VERTEX_POINT('',#2707);+#2707 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#2708 = LINE('',#2709,#2710);+#2709 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#2710 = VECTOR('',#2711,1.);+#2711 = DIRECTION('',(1.,0.,0.));+#2712 = ORIENTED_EDGE('',*,*,#2713,.T.);+#2713 = EDGE_CURVE('',#2706,#2714,#2716,.T.);+#2714 = VERTEX_POINT('',#2715);+#2715 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#2716 = LINE('',#2717,#2718);+#2717 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#2718 = VECTOR('',#2719,1.);+#2719 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2720 = ORIENTED_EDGE('',*,*,#2721,.T.);+#2721 = EDGE_CURVE('',#2714,#2722,#2724,.T.);+#2722 = VERTEX_POINT('',#2723);+#2723 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#2724 = LINE('',#2725,#2726);+#2725 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#2726 = VECTOR('',#2727,1.);+#2727 = DIRECTION('',(1.,0.,0.));+#2728 = ORIENTED_EDGE('',*,*,#2729,.T.);+#2729 = EDGE_CURVE('',#2722,#2643,#2730,.T.);+#2730 = LINE('',#2731,#2732);+#2731 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#2732 = VECTOR('',#2733,1.);+#2733 = DIRECTION('',(0.,0.,1.));+#2734 = PLANE('',#2735);+#2735 = AXIS2_PLACEMENT_3D('',#2736,#2737,#2738);+#2736 = CARTESIAN_POINT('',(-2.634182274245,-2.125,0.217942023204));+#2737 = DIRECTION('',(-0.,-1.,-0.));+#2738 = DIRECTION('',(0.,0.,-1.));+#2739 = ADVANCED_FACE('',(#2740),#2765,.F.);+#2740 = FACE_BOUND('',#2741,.F.);+#2741 = EDGE_LOOP('',(#2742,#2750,#2758,#2764));+#2742 = ORIENTED_EDGE('',*,*,#2743,.F.);+#2743 = EDGE_CURVE('',#2744,#2714,#2746,.T.);+#2744 = VERTEX_POINT('',#2745);+#2745 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#2746 = LINE('',#2747,#2748);+#2747 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#2748 = VECTOR('',#2749,1.);+#2749 = DIRECTION('',(0.,1.,0.));+#2750 = ORIENTED_EDGE('',*,*,#2751,.T.);+#2751 = EDGE_CURVE('',#2744,#2752,#2754,.T.);+#2752 = VERTEX_POINT('',#2753);+#2753 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#2754 = LINE('',#2755,#2756);+#2755 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#2756 = VECTOR('',#2757,1.);+#2757 = DIRECTION('',(1.,0.,0.));+#2758 = ORIENTED_EDGE('',*,*,#2759,.T.);+#2759 = EDGE_CURVE('',#2752,#2722,#2760,.T.);+#2760 = LINE('',#2761,#2762);+#2761 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#2762 = VECTOR('',#2763,1.);+#2763 = DIRECTION('',(0.,1.,0.));+#2764 = ORIENTED_EDGE('',*,*,#2721,.F.);+#2765 = PLANE('',#2766);+#2766 = AXIS2_PLACEMENT_3D('',#2767,#2768,#2769);+#2767 = CARTESIAN_POINT('',(-2.2,-2.275,0.445));+#2768 = DIRECTION('',(-0.,0.,1.));+#2769 = DIRECTION('',(1.,0.,0.));+#2770 = ADVANCED_FACE('',(#2771),#2789,.F.);+#2771 = FACE_BOUND('',#2772,.F.);+#2772 = EDGE_LOOP('',(#2773,#2781,#2782,#2783));+#2773 = ORIENTED_EDGE('',*,*,#2774,.T.);+#2774 = EDGE_CURVE('',#2775,#2744,#2777,.T.);+#2775 = VERTEX_POINT('',#2776);+#2776 = CARTESIAN_POINT('',(-2.4875,-2.425,0.)); #2777 = LINE('',#2778,#2779);-#2778 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#2778 = CARTESIAN_POINT('',(-2.4875,-2.425,0.)); #2779 = VECTOR('',#2780,1.);-#2780 = DIRECTION('',(1.,0.,0.));-#2781 = ORIENTED_EDGE('',*,*,#2690,.T.);-#2782 = PLANE('',#2783);-#2783 = AXIS2_PLACEMENT_3D('',#2784,#2785,#2786);-#2784 = CARTESIAN_POINT('',(-2.634182274245,-2.425,0.217942023204));-#2785 = DIRECTION('',(-0.,-1.,-0.));-#2786 = DIRECTION('',(0.,0.,-1.));-#2787 = ADVANCED_FACE('',(#2788),#2806,.F.);-#2788 = FACE_BOUND('',#2789,.F.);-#2789 = EDGE_LOOP('',(#2790,#2798,#2799,#2800));-#2790 = ORIENTED_EDGE('',*,*,#2791,.F.);-#2791 = EDGE_CURVE('',#2769,#2792,#2794,.T.);-#2792 = VERTEX_POINT('',#2793);-#2793 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));-#2794 = LINE('',#2795,#2796);-#2795 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));-#2796 = VECTOR('',#2797,1.);-#2797 = DIRECTION('',(0.,1.,0.));-#2798 = ORIENTED_EDGE('',*,*,#2776,.T.);-#2799 = ORIENTED_EDGE('',*,*,#2680,.T.);-#2800 = ORIENTED_EDGE('',*,*,#2801,.F.);-#2801 = EDGE_CURVE('',#2792,#2683,#2802,.T.);-#2802 = LINE('',#2803,#2804);-#2803 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));-#2804 = VECTOR('',#2805,1.);-#2805 = DIRECTION('',(1.,0.,0.));-#2806 = PLANE('',#2807);-#2807 = AXIS2_PLACEMENT_3D('',#2808,#2809,#2810);-#2808 = CARTESIAN_POINT('',(-2.2,-2.275,0.445));-#2809 = DIRECTION('',(-0.,0.,1.));-#2810 = DIRECTION('',(1.,0.,0.));-#2811 = ADVANCED_FACE('',(#2812),#2830,.F.);-#2812 = FACE_BOUND('',#2813,.F.);-#2813 = EDGE_LOOP('',(#2814,#2815,#2823,#2829));-#2814 = ORIENTED_EDGE('',*,*,#2744,.T.);-#2815 = ORIENTED_EDGE('',*,*,#2816,.F.);-#2816 = EDGE_CURVE('',#2817,#2745,#2819,.T.);-#2817 = VERTEX_POINT('',#2818);-#2818 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#2819 = LINE('',#2820,#2821);-#2820 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#2821 = VECTOR('',#2822,1.);-#2822 = DIRECTION('',(0.,-1.,0.));-#2823 = ORIENTED_EDGE('',*,*,#2824,.F.);-#2824 = EDGE_CURVE('',#2720,#2817,#2825,.T.);+#2780 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2781 = ORIENTED_EDGE('',*,*,#2743,.T.);+#2782 = ORIENTED_EDGE('',*,*,#2713,.F.);+#2783 = ORIENTED_EDGE('',*,*,#2784,.T.);+#2784 = EDGE_CURVE('',#2706,#2775,#2785,.T.);+#2785 = LINE('',#2786,#2787);+#2786 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#2787 = VECTOR('',#2788,1.);+#2788 = DIRECTION('',(0.,-1.,0.));+#2789 = PLANE('',#2790);+#2790 = AXIS2_PLACEMENT_3D('',#2791,#2792,#2793);+#2791 = CARTESIAN_POINT('',(-2.4875,-2.275,0.));+#2792 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2793 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2794 = ADVANCED_FACE('',(#2795),#2813,.F.);+#2795 = FACE_BOUND('',#2796,.F.);+#2796 = EDGE_LOOP('',(#2797,#2805,#2806,#2807));+#2797 = ORIENTED_EDGE('',*,*,#2798,.T.);+#2798 = EDGE_CURVE('',#2799,#2775,#2801,.T.);+#2799 = VERTEX_POINT('',#2800);+#2800 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#2801 = LINE('',#2802,#2803);+#2802 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#2803 = VECTOR('',#2804,1.);+#2804 = DIRECTION('',(1.,0.,0.));+#2805 = ORIENTED_EDGE('',*,*,#2784,.F.);+#2806 = ORIENTED_EDGE('',*,*,#2705,.F.);+#2807 = ORIENTED_EDGE('',*,*,#2808,.T.);+#2808 = EDGE_CURVE('',#2698,#2799,#2809,.T.);+#2809 = LINE('',#2810,#2811);+#2810 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#2811 = VECTOR('',#2812,1.);+#2812 = DIRECTION('',(0.,-1.,0.));+#2813 = PLANE('',#2814);+#2814 = AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);+#2815 = CARTESIAN_POINT('',(-3.205,-2.275,0.));+#2816 = DIRECTION('',(-0.,0.,1.));+#2817 = DIRECTION('',(1.,0.,0.));+#2818 = ADVANCED_FACE('',(#2819),#2837,.F.);+#2819 = FACE_BOUND('',#2820,.F.);+#2820 = EDGE_LOOP('',(#2821,#2829,#2830,#2831));+#2821 = ORIENTED_EDGE('',*,*,#2822,.T.);+#2822 = EDGE_CURVE('',#2823,#2799,#2825,.T.);+#2823 = VERTEX_POINT('',#2824);+#2824 = CARTESIAN_POINT('',(-3.205,-2.425,0.15)); #2825 = LINE('',#2826,#2827);-#2826 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#2826 = CARTESIAN_POINT('',(-3.205,-2.425,0.15)); #2827 = VECTOR('',#2828,1.);-#2828 = DIRECTION('',(-1.,0.,0.));-#2829 = ORIENTED_EDGE('',*,*,#2719,.T.);-#2830 = PLANE('',#2831);-#2831 = AXIS2_PLACEMENT_3D('',#2832,#2833,#2834);-#2832 = CARTESIAN_POINT('',(-2.6375,-2.275,0.15));-#2833 = DIRECTION('',(-0.,-0.,-1.));-#2834 = DIRECTION('',(-1.,0.,0.));-#2835 = ADVANCED_FACE('',(#2836),#2865,.F.);-#2836 = FACE_BOUND('',#2837,.F.);-#2837 = EDGE_LOOP('',(#2838,#2839,#2840,#2841,#2849,#2857,#2863,#2864));-#2838 = ORIENTED_EDGE('',*,*,#2666,.T.);-#2839 = ORIENTED_EDGE('',*,*,#2727,.T.);-#2840 = ORIENTED_EDGE('',*,*,#2824,.T.);-#2841 = ORIENTED_EDGE('',*,*,#2842,.T.);-#2842 = EDGE_CURVE('',#2817,#2843,#2845,.T.);-#2843 = VERTEX_POINT('',#2844);-#2844 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#2845 = LINE('',#2846,#2847);-#2846 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#2847 = VECTOR('',#2848,1.);-#2848 = DIRECTION('',(0.,0.,-1.));-#2849 = ORIENTED_EDGE('',*,*,#2850,.T.);-#2850 = EDGE_CURVE('',#2843,#2851,#2853,.T.);-#2851 = VERTEX_POINT('',#2852);-#2852 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#2853 = LINE('',#2854,#2855);-#2854 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#2855 = VECTOR('',#2856,1.);-#2856 = DIRECTION('',(1.,0.,0.));-#2857 = ORIENTED_EDGE('',*,*,#2858,.T.);-#2858 = EDGE_CURVE('',#2851,#2792,#2859,.T.);-#2859 = LINE('',#2860,#2861);-#2860 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#2861 = VECTOR('',#2862,1.);-#2862 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2863 = ORIENTED_EDGE('',*,*,#2801,.T.);-#2864 = ORIENTED_EDGE('',*,*,#2697,.T.);-#2865 = PLANE('',#2866);-#2866 = AXIS2_PLACEMENT_3D('',#2867,#2868,#2869);-#2867 = CARTESIAN_POINT('',(-2.634182274245,-2.125,0.217942023204));-#2868 = DIRECTION('',(-0.,-1.,-0.));-#2869 = DIRECTION('',(0.,0.,-1.));-#2870 = ADVANCED_FACE('',(#2871),#2882,.F.);-#2871 = FACE_BOUND('',#2872,.F.);-#2872 = EDGE_LOOP('',(#2873,#2874,#2880,#2881));-#2873 = ORIENTED_EDGE('',*,*,#2752,.T.);-#2874 = ORIENTED_EDGE('',*,*,#2875,.F.);-#2875 = EDGE_CURVE('',#2843,#2753,#2876,.T.);-#2876 = LINE('',#2877,#2878);-#2877 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#2878 = VECTOR('',#2879,1.);-#2879 = DIRECTION('',(0.,-1.,0.));-#2880 = ORIENTED_EDGE('',*,*,#2842,.F.);-#2881 = ORIENTED_EDGE('',*,*,#2816,.T.);-#2882 = PLANE('',#2883);-#2883 = AXIS2_PLACEMENT_3D('',#2884,#2885,#2886);-#2884 = CARTESIAN_POINT('',(-3.205,-2.275,0.15));-#2885 = DIRECTION('',(1.,0.,0.));-#2886 = DIRECTION('',(0.,0.,-1.));-#2887 = ADVANCED_FACE('',(#2888),#2899,.F.);-#2888 = FACE_BOUND('',#2889,.F.);-#2889 = EDGE_LOOP('',(#2890,#2891,#2897,#2898));-#2890 = ORIENTED_EDGE('',*,*,#2760,.T.);-#2891 = ORIENTED_EDGE('',*,*,#2892,.F.);-#2892 = EDGE_CURVE('',#2851,#2761,#2893,.T.);-#2893 = LINE('',#2894,#2895);-#2894 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#2895 = VECTOR('',#2896,1.);-#2896 = DIRECTION('',(0.,-1.,0.));-#2897 = ORIENTED_EDGE('',*,*,#2850,.F.);-#2898 = ORIENTED_EDGE('',*,*,#2875,.T.);+#2828 = DIRECTION('',(0.,0.,-1.));+#2829 = ORIENTED_EDGE('',*,*,#2808,.F.);+#2830 = ORIENTED_EDGE('',*,*,#2697,.F.);+#2831 = ORIENTED_EDGE('',*,*,#2832,.T.);+#2832 = EDGE_CURVE('',#2690,#2823,#2833,.T.);+#2833 = LINE('',#2834,#2835);+#2834 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#2835 = VECTOR('',#2836,1.);+#2836 = DIRECTION('',(0.,-1.,0.));+#2837 = PLANE('',#2838);+#2838 = AXIS2_PLACEMENT_3D('',#2839,#2840,#2841);+#2839 = CARTESIAN_POINT('',(-3.205,-2.275,0.15));+#2840 = DIRECTION('',(1.,0.,0.));+#2841 = DIRECTION('',(0.,0.,-1.));+#2842 = ADVANCED_FACE('',(#2843),#2861,.F.);+#2843 = FACE_BOUND('',#2844,.F.);+#2844 = EDGE_LOOP('',(#2845,#2853,#2854,#2855));+#2845 = ORIENTED_EDGE('',*,*,#2846,.T.);+#2846 = EDGE_CURVE('',#2847,#2823,#2849,.T.);+#2847 = VERTEX_POINT('',#2848);+#2848 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#2849 = LINE('',#2850,#2851);+#2850 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#2851 = VECTOR('',#2852,1.);+#2852 = DIRECTION('',(-1.,0.,0.));+#2853 = ORIENTED_EDGE('',*,*,#2832,.F.);+#2854 = ORIENTED_EDGE('',*,*,#2689,.F.);+#2855 = ORIENTED_EDGE('',*,*,#2856,.T.);+#2856 = EDGE_CURVE('',#2682,#2847,#2857,.T.);+#2857 = LINE('',#2858,#2859);+#2858 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#2859 = VECTOR('',#2860,1.);+#2860 = DIRECTION('',(0.,-1.,0.));+#2861 = PLANE('',#2862);+#2862 = AXIS2_PLACEMENT_3D('',#2863,#2864,#2865);+#2863 = CARTESIAN_POINT('',(-2.6375,-2.275,0.15));+#2864 = DIRECTION('',(-0.,-0.,-1.));+#2865 = DIRECTION('',(-1.,0.,0.));+#2866 = ADVANCED_FACE('',(#2867),#2878,.F.);+#2867 = FACE_BOUND('',#2868,.F.);+#2868 = EDGE_LOOP('',(#2869,#2875,#2876,#2877));+#2869 = ORIENTED_EDGE('',*,*,#2870,.T.);+#2870 = EDGE_CURVE('',#2651,#2847,#2871,.T.);+#2871 = LINE('',#2872,#2873);+#2872 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));+#2873 = VECTOR('',#2874,1.);+#2874 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2875 = ORIENTED_EDGE('',*,*,#2856,.F.);+#2876 = ORIENTED_EDGE('',*,*,#2681,.F.);+#2877 = ORIENTED_EDGE('',*,*,#2658,.T.);+#2878 = PLANE('',#2879);+#2879 = AXIS2_PLACEMENT_3D('',#2880,#2881,#2882);+#2880 = CARTESIAN_POINT('',(-2.35,-2.275,0.595));+#2881 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#2882 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2883 = ADVANCED_FACE('',(#2884),#2899,.T.);+#2884 = FACE_BOUND('',#2885,.T.);+#2885 = EDGE_LOOP('',(#2886,#2887,#2888,#2889,#2890,#2891,#2892,#2893));+#2886 = ORIENTED_EDGE('',*,*,#2650,.T.);+#2887 = ORIENTED_EDGE('',*,*,#2870,.T.);+#2888 = ORIENTED_EDGE('',*,*,#2846,.T.);+#2889 = ORIENTED_EDGE('',*,*,#2822,.T.);+#2890 = ORIENTED_EDGE('',*,*,#2798,.T.);+#2891 = ORIENTED_EDGE('',*,*,#2774,.T.);+#2892 = ORIENTED_EDGE('',*,*,#2751,.T.);+#2893 = ORIENTED_EDGE('',*,*,#2894,.T.);+#2894 = EDGE_CURVE('',#2752,#2641,#2895,.T.);+#2895 = LINE('',#2896,#2897);+#2896 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#2897 = VECTOR('',#2898,1.);+#2898 = DIRECTION('',(0.,0.,1.)); #2899 = PLANE('',#2900); #2900 = AXIS2_PLACEMENT_3D('',#2901,#2902,#2903);-#2901 = CARTESIAN_POINT('',(-3.205,-2.275,0.));-#2902 = DIRECTION('',(-0.,0.,1.));-#2903 = DIRECTION('',(1.,0.,0.));+#2901 = CARTESIAN_POINT('',(-2.634182274245,-2.425,0.217942023204));+#2902 = DIRECTION('',(-0.,-1.,-0.));+#2903 = DIRECTION('',(0.,0.,-1.)); #2904 = ADVANCED_FACE('',(#2905),#2911,.F.); #2905 = FACE_BOUND('',#2906,.F.); #2906 = EDGE_LOOP('',(#2907,#2908,#2909,#2910));-#2907 = ORIENTED_EDGE('',*,*,#2768,.T.);-#2908 = ORIENTED_EDGE('',*,*,#2791,.T.);-#2909 = ORIENTED_EDGE('',*,*,#2858,.F.);-#2910 = ORIENTED_EDGE('',*,*,#2892,.T.);+#2907 = ORIENTED_EDGE('',*,*,#2759,.F.);+#2908 = ORIENTED_EDGE('',*,*,#2894,.T.);+#2909 = ORIENTED_EDGE('',*,*,#2640,.T.);+#2910 = ORIENTED_EDGE('',*,*,#2729,.F.); #2911 = PLANE('',#2912); #2912 = AXIS2_PLACEMENT_3D('',#2913,#2914,#2915);-#2913 = CARTESIAN_POINT('',(-2.4875,-2.275,0.));-#2914 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#2915 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2913 = CARTESIAN_POINT('',(-2.15,-2.275,0.445));+#2914 = DIRECTION('',(-1.,0.,0.));+#2915 = DIRECTION('',(0.,0.,1.)); #2916 = MANIFOLD_SOLID_BREP('',#2917);-#2917 = CLOSED_SHELL('',(#2918,#2958,#2989,#3020,#3069,#3093,#3117,#3152- ,#3169,#3186));+#2917 = CLOSED_SHELL('',(#2918,#2958,#3021,#3052,#3076,#3100,#3124,#3148+ ,#3165,#3186)); #2918 = ADVANCED_FACE('',(#2919),#2953,.F.); #2919 = FACE_BOUND('',#2920,.F.); #2920 = EDGE_LOOP('',(#2921,#2931,#2939,#2947));@@ -2999,249 +2999,249 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #2955 = CARTESIAN_POINT('',(-2.15,-2.925,0.595)); #2956 = DIRECTION('',(-0.,-0.,-1.)); #2957 = DIRECTION('',(-1.,0.,0.));-#2958 = ADVANCED_FACE('',(#2959),#2984,.F.);+#2958 = ADVANCED_FACE('',(#2959),#3016,.F.); #2959 = FACE_BOUND('',#2960,.F.);-#2960 = EDGE_LOOP('',(#2961,#2971,#2977,#2978));-#2961 = ORIENTED_EDGE('',*,*,#2962,.F.);-#2962 = EDGE_CURVE('',#2963,#2965,#2967,.T.);-#2963 = VERTEX_POINT('',#2964);-#2964 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#2965 = VERTEX_POINT('',#2966);-#2966 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));-#2967 = LINE('',#2968,#2969);-#2968 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#2969 = VECTOR('',#2970,1.);-#2970 = DIRECTION('',(0.,1.,0.));-#2971 = ORIENTED_EDGE('',*,*,#2972,.T.);-#2972 = EDGE_CURVE('',#2963,#2923,#2973,.T.);-#2973 = LINE('',#2974,#2975);-#2974 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#2975 = VECTOR('',#2976,1.);-#2976 = DIRECTION('',(0.,0.,1.));-#2977 = ORIENTED_EDGE('',*,*,#2922,.T.);-#2978 = ORIENTED_EDGE('',*,*,#2979,.F.);-#2979 = EDGE_CURVE('',#2965,#2925,#2980,.T.);-#2980 = LINE('',#2981,#2982);-#2981 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));-#2982 = VECTOR('',#2983,1.);-#2983 = DIRECTION('',(0.,0.,1.));-#2984 = PLANE('',#2985);-#2985 = AXIS2_PLACEMENT_3D('',#2986,#2987,#2988);-#2986 = CARTESIAN_POINT('',(-2.15,-2.925,0.445));-#2987 = DIRECTION('',(-1.,0.,0.));-#2988 = DIRECTION('',(0.,0.,1.));-#2989 = ADVANCED_FACE('',(#2990),#3015,.F.);-#2990 = FACE_BOUND('',#2991,.F.);-#2991 = EDGE_LOOP('',(#2992,#3000,#3008,#3014));-#2992 = ORIENTED_EDGE('',*,*,#2993,.T.);-#2993 = EDGE_CURVE('',#2933,#2994,#2996,.T.);-#2994 = VERTEX_POINT('',#2995);-#2995 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));-#2996 = LINE('',#2997,#2998);-#2997 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));-#2998 = VECTOR('',#2999,1.);-#2999 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#3000 = ORIENTED_EDGE('',*,*,#3001,.F.);-#3001 = EDGE_CURVE('',#3002,#2994,#3004,.T.);-#3002 = VERTEX_POINT('',#3003);-#3003 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));-#3004 = LINE('',#3005,#3006);-#3005 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));-#3006 = VECTOR('',#3007,1.);-#3007 = DIRECTION('',(0.,-1.,0.));-#3008 = ORIENTED_EDGE('',*,*,#3009,.F.);-#3009 = EDGE_CURVE('',#2941,#3002,#3010,.T.);-#3010 = LINE('',#3011,#3012);-#3011 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));-#3012 = VECTOR('',#3013,1.);-#3013 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#3014 = ORIENTED_EDGE('',*,*,#2940,.T.);-#3015 = PLANE('',#3016);-#3016 = AXIS2_PLACEMENT_3D('',#3017,#3018,#3019);-#3017 = CARTESIAN_POINT('',(-2.35,-2.925,0.595));-#3018 = DIRECTION('',(0.839949759337,0.,-0.542664170358));-#3019 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#3020 = ADVANCED_FACE('',(#3021),#3064,.T.);-#3021 = FACE_BOUND('',#3022,.T.);-#3022 = EDGE_LOOP('',(#3023,#3024,#3025,#3033,#3041,#3049,#3057,#3063));-#3023 = ORIENTED_EDGE('',*,*,#2932,.T.);-#3024 = ORIENTED_EDGE('',*,*,#2993,.T.);-#3025 = ORIENTED_EDGE('',*,*,#3026,.T.);-#3026 = EDGE_CURVE('',#2994,#3027,#3029,.T.);-#3027 = VERTEX_POINT('',#3028);-#3028 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));-#3029 = LINE('',#3030,#3031);-#3030 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));-#3031 = VECTOR('',#3032,1.);-#3032 = DIRECTION('',(-1.,0.,0.));-#3033 = ORIENTED_EDGE('',*,*,#3034,.T.);-#3034 = EDGE_CURVE('',#3027,#3035,#3037,.T.);-#3035 = VERTEX_POINT('',#3036);-#3036 = CARTESIAN_POINT('',(-3.205,-3.075,0.));-#3037 = LINE('',#3038,#3039);-#3038 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));-#3039 = VECTOR('',#3040,1.);-#3040 = DIRECTION('',(0.,0.,-1.));-#3041 = ORIENTED_EDGE('',*,*,#3042,.T.);-#3042 = EDGE_CURVE('',#3035,#3043,#3045,.T.);-#3043 = VERTEX_POINT('',#3044);-#3044 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));-#3045 = LINE('',#3046,#3047);-#3046 = CARTESIAN_POINT('',(-3.205,-3.075,0.));-#3047 = VECTOR('',#3048,1.);-#3048 = DIRECTION('',(1.,0.,0.));-#3049 = ORIENTED_EDGE('',*,*,#3050,.T.);-#3050 = EDGE_CURVE('',#3043,#3051,#3053,.T.);-#3051 = VERTEX_POINT('',#3052);-#3052 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));-#3053 = LINE('',#3054,#3055);-#3054 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));-#3055 = VECTOR('',#3056,1.);-#3056 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3057 = ORIENTED_EDGE('',*,*,#3058,.T.);-#3058 = EDGE_CURVE('',#3051,#2963,#3059,.T.);+#2960 = EDGE_LOOP('',(#2961,#2962,#2970,#2978,#2986,#2994,#3002,#3010));+#2961 = ORIENTED_EDGE('',*,*,#2948,.T.);+#2962 = ORIENTED_EDGE('',*,*,#2963,.T.);+#2963 = EDGE_CURVE('',#2941,#2964,#2966,.T.);+#2964 = VERTEX_POINT('',#2965);+#2965 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#2966 = LINE('',#2967,#2968);+#2967 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));+#2968 = VECTOR('',#2969,1.);+#2969 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2970 = ORIENTED_EDGE('',*,*,#2971,.T.);+#2971 = EDGE_CURVE('',#2964,#2972,#2974,.T.);+#2972 = VERTEX_POINT('',#2973);+#2973 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#2974 = LINE('',#2975,#2976);+#2975 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#2976 = VECTOR('',#2977,1.);+#2977 = DIRECTION('',(-1.,0.,0.));+#2978 = ORIENTED_EDGE('',*,*,#2979,.T.);+#2979 = EDGE_CURVE('',#2972,#2980,#2982,.T.);+#2980 = VERTEX_POINT('',#2981);+#2981 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#2982 = LINE('',#2983,#2984);+#2983 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#2984 = VECTOR('',#2985,1.);+#2985 = DIRECTION('',(0.,0.,-1.));+#2986 = ORIENTED_EDGE('',*,*,#2987,.T.);+#2987 = EDGE_CURVE('',#2980,#2988,#2990,.T.);+#2988 = VERTEX_POINT('',#2989);+#2989 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#2990 = LINE('',#2991,#2992);+#2991 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#2992 = VECTOR('',#2993,1.);+#2993 = DIRECTION('',(1.,0.,0.));+#2994 = ORIENTED_EDGE('',*,*,#2995,.T.);+#2995 = EDGE_CURVE('',#2988,#2996,#2998,.T.);+#2996 = VERTEX_POINT('',#2997);+#2997 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#2998 = LINE('',#2999,#3000);+#2999 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#3000 = VECTOR('',#3001,1.);+#3001 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3002 = ORIENTED_EDGE('',*,*,#3003,.T.);+#3003 = EDGE_CURVE('',#2996,#3004,#3006,.T.);+#3004 = VERTEX_POINT('',#3005);+#3005 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#3006 = LINE('',#3007,#3008);+#3007 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#3008 = VECTOR('',#3009,1.);+#3009 = DIRECTION('',(1.,0.,0.));+#3010 = ORIENTED_EDGE('',*,*,#3011,.T.);+#3011 = EDGE_CURVE('',#3004,#2925,#3012,.T.);+#3012 = LINE('',#3013,#3014);+#3013 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#3014 = VECTOR('',#3015,1.);+#3015 = DIRECTION('',(0.,0.,1.));+#3016 = PLANE('',#3017);+#3017 = AXIS2_PLACEMENT_3D('',#3018,#3019,#3020);+#3018 = CARTESIAN_POINT('',(-2.634182274245,-2.775,0.217942023204));+#3019 = DIRECTION('',(-0.,-1.,-0.));+#3020 = DIRECTION('',(0.,0.,-1.));+#3021 = ADVANCED_FACE('',(#3022),#3047,.F.);+#3022 = FACE_BOUND('',#3023,.F.);+#3023 = EDGE_LOOP('',(#3024,#3032,#3040,#3046));+#3024 = ORIENTED_EDGE('',*,*,#3025,.F.);+#3025 = EDGE_CURVE('',#3026,#2996,#3028,.T.);+#3026 = VERTEX_POINT('',#3027);+#3027 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#3028 = LINE('',#3029,#3030);+#3029 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#3030 = VECTOR('',#3031,1.);+#3031 = DIRECTION('',(0.,1.,0.));+#3032 = ORIENTED_EDGE('',*,*,#3033,.T.);+#3033 = EDGE_CURVE('',#3026,#3034,#3036,.T.);+#3034 = VERTEX_POINT('',#3035);+#3035 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#3036 = LINE('',#3037,#3038);+#3037 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#3038 = VECTOR('',#3039,1.);+#3039 = DIRECTION('',(1.,0.,0.));+#3040 = ORIENTED_EDGE('',*,*,#3041,.T.);+#3041 = EDGE_CURVE('',#3034,#3004,#3042,.T.);+#3042 = LINE('',#3043,#3044);+#3043 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#3044 = VECTOR('',#3045,1.);+#3045 = DIRECTION('',(0.,1.,0.));+#3046 = ORIENTED_EDGE('',*,*,#3003,.F.);+#3047 = PLANE('',#3048);+#3048 = AXIS2_PLACEMENT_3D('',#3049,#3050,#3051);+#3049 = CARTESIAN_POINT('',(-2.2,-2.925,0.445));+#3050 = DIRECTION('',(-0.,0.,1.));+#3051 = DIRECTION('',(1.,0.,0.));+#3052 = ADVANCED_FACE('',(#3053),#3071,.F.);+#3053 = FACE_BOUND('',#3054,.F.);+#3054 = EDGE_LOOP('',(#3055,#3063,#3064,#3065));+#3055 = ORIENTED_EDGE('',*,*,#3056,.T.);+#3056 = EDGE_CURVE('',#3057,#3026,#3059,.T.);+#3057 = VERTEX_POINT('',#3058);+#3058 = CARTESIAN_POINT('',(-2.4875,-3.075,0.)); #3059 = LINE('',#3060,#3061);-#3060 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#3060 = CARTESIAN_POINT('',(-2.4875,-3.075,0.)); #3061 = VECTOR('',#3062,1.);-#3062 = DIRECTION('',(1.,0.,0.));-#3063 = ORIENTED_EDGE('',*,*,#2972,.T.);-#3064 = PLANE('',#3065);-#3065 = AXIS2_PLACEMENT_3D('',#3066,#3067,#3068);-#3066 = CARTESIAN_POINT('',(-2.634182274245,-3.075,0.217942023204));-#3067 = DIRECTION('',(-0.,-1.,-0.));-#3068 = DIRECTION('',(0.,0.,-1.));-#3069 = ADVANCED_FACE('',(#3070),#3088,.F.);-#3070 = FACE_BOUND('',#3071,.F.);-#3071 = EDGE_LOOP('',(#3072,#3080,#3081,#3082));-#3072 = ORIENTED_EDGE('',*,*,#3073,.F.);-#3073 = EDGE_CURVE('',#3051,#3074,#3076,.T.);-#3074 = VERTEX_POINT('',#3075);-#3075 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));-#3076 = LINE('',#3077,#3078);-#3077 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));-#3078 = VECTOR('',#3079,1.);-#3079 = DIRECTION('',(0.,1.,0.));-#3080 = ORIENTED_EDGE('',*,*,#3058,.T.);-#3081 = ORIENTED_EDGE('',*,*,#2962,.T.);-#3082 = ORIENTED_EDGE('',*,*,#3083,.F.);-#3083 = EDGE_CURVE('',#3074,#2965,#3084,.T.);-#3084 = LINE('',#3085,#3086);-#3085 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));-#3086 = VECTOR('',#3087,1.);-#3087 = DIRECTION('',(1.,0.,0.));-#3088 = PLANE('',#3089);-#3089 = AXIS2_PLACEMENT_3D('',#3090,#3091,#3092);-#3090 = CARTESIAN_POINT('',(-2.2,-2.925,0.445));-#3091 = DIRECTION('',(-0.,0.,1.));-#3092 = DIRECTION('',(1.,0.,0.));-#3093 = ADVANCED_FACE('',(#3094),#3112,.F.);-#3094 = FACE_BOUND('',#3095,.F.);-#3095 = EDGE_LOOP('',(#3096,#3097,#3105,#3111));-#3096 = ORIENTED_EDGE('',*,*,#3026,.T.);-#3097 = ORIENTED_EDGE('',*,*,#3098,.F.);-#3098 = EDGE_CURVE('',#3099,#3027,#3101,.T.);-#3099 = VERTEX_POINT('',#3100);-#3100 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#3101 = LINE('',#3102,#3103);-#3102 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#3103 = VECTOR('',#3104,1.);-#3104 = DIRECTION('',(0.,-1.,0.));-#3105 = ORIENTED_EDGE('',*,*,#3106,.F.);-#3106 = EDGE_CURVE('',#3002,#3099,#3107,.T.);+#3062 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3063 = ORIENTED_EDGE('',*,*,#3025,.T.);+#3064 = ORIENTED_EDGE('',*,*,#2995,.F.);+#3065 = ORIENTED_EDGE('',*,*,#3066,.T.);+#3066 = EDGE_CURVE('',#2988,#3057,#3067,.T.);+#3067 = LINE('',#3068,#3069);+#3068 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#3069 = VECTOR('',#3070,1.);+#3070 = DIRECTION('',(0.,-1.,0.));+#3071 = PLANE('',#3072);+#3072 = AXIS2_PLACEMENT_3D('',#3073,#3074,#3075);+#3073 = CARTESIAN_POINT('',(-2.4875,-2.925,0.));+#3074 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#3075 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3076 = ADVANCED_FACE('',(#3077),#3095,.F.);+#3077 = FACE_BOUND('',#3078,.F.);+#3078 = EDGE_LOOP('',(#3079,#3087,#3088,#3089));+#3079 = ORIENTED_EDGE('',*,*,#3080,.T.);+#3080 = EDGE_CURVE('',#3081,#3057,#3083,.T.);+#3081 = VERTEX_POINT('',#3082);+#3082 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#3083 = LINE('',#3084,#3085);+#3084 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#3085 = VECTOR('',#3086,1.);+#3086 = DIRECTION('',(1.,0.,0.));+#3087 = ORIENTED_EDGE('',*,*,#3066,.F.);+#3088 = ORIENTED_EDGE('',*,*,#2987,.F.);+#3089 = ORIENTED_EDGE('',*,*,#3090,.T.);+#3090 = EDGE_CURVE('',#2980,#3081,#3091,.T.);+#3091 = LINE('',#3092,#3093);+#3092 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#3093 = VECTOR('',#3094,1.);+#3094 = DIRECTION('',(0.,-1.,0.));+#3095 = PLANE('',#3096);+#3096 = AXIS2_PLACEMENT_3D('',#3097,#3098,#3099);+#3097 = CARTESIAN_POINT('',(-3.205,-2.925,0.));+#3098 = DIRECTION('',(-0.,0.,1.));+#3099 = DIRECTION('',(1.,0.,0.));+#3100 = ADVANCED_FACE('',(#3101),#3119,.F.);+#3101 = FACE_BOUND('',#3102,.F.);+#3102 = EDGE_LOOP('',(#3103,#3111,#3112,#3113));+#3103 = ORIENTED_EDGE('',*,*,#3104,.T.);+#3104 = EDGE_CURVE('',#3105,#3081,#3107,.T.);+#3105 = VERTEX_POINT('',#3106);+#3106 = CARTESIAN_POINT('',(-3.205,-3.075,0.15)); #3107 = LINE('',#3108,#3109);-#3108 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#3108 = CARTESIAN_POINT('',(-3.205,-3.075,0.15)); #3109 = VECTOR('',#3110,1.);-#3110 = DIRECTION('',(-1.,0.,0.));-#3111 = ORIENTED_EDGE('',*,*,#3001,.T.);-#3112 = PLANE('',#3113);-#3113 = AXIS2_PLACEMENT_3D('',#3114,#3115,#3116);-#3114 = CARTESIAN_POINT('',(-2.6375,-2.925,0.15));-#3115 = DIRECTION('',(-0.,-0.,-1.));-#3116 = DIRECTION('',(-1.,0.,0.));-#3117 = ADVANCED_FACE('',(#3118),#3147,.F.);-#3118 = FACE_BOUND('',#3119,.F.);-#3119 = EDGE_LOOP('',(#3120,#3121,#3122,#3123,#3131,#3139,#3145,#3146));-#3120 = ORIENTED_EDGE('',*,*,#2948,.T.);-#3121 = ORIENTED_EDGE('',*,*,#3009,.T.);-#3122 = ORIENTED_EDGE('',*,*,#3106,.T.);-#3123 = ORIENTED_EDGE('',*,*,#3124,.T.);-#3124 = EDGE_CURVE('',#3099,#3125,#3127,.T.);-#3125 = VERTEX_POINT('',#3126);-#3126 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#3127 = LINE('',#3128,#3129);-#3128 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#3129 = VECTOR('',#3130,1.);-#3130 = DIRECTION('',(0.,0.,-1.));-#3131 = ORIENTED_EDGE('',*,*,#3132,.T.);-#3132 = EDGE_CURVE('',#3125,#3133,#3135,.T.);-#3133 = VERTEX_POINT('',#3134);-#3134 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#3135 = LINE('',#3136,#3137);-#3136 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#3137 = VECTOR('',#3138,1.);-#3138 = DIRECTION('',(1.,0.,0.));-#3139 = ORIENTED_EDGE('',*,*,#3140,.T.);-#3140 = EDGE_CURVE('',#3133,#3074,#3141,.T.);-#3141 = LINE('',#3142,#3143);-#3142 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#3143 = VECTOR('',#3144,1.);-#3144 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3145 = ORIENTED_EDGE('',*,*,#3083,.T.);-#3146 = ORIENTED_EDGE('',*,*,#2979,.T.);-#3147 = PLANE('',#3148);-#3148 = AXIS2_PLACEMENT_3D('',#3149,#3150,#3151);-#3149 = CARTESIAN_POINT('',(-2.634182274245,-2.775,0.217942023204));-#3150 = DIRECTION('',(-0.,-1.,-0.));-#3151 = DIRECTION('',(0.,0.,-1.));-#3152 = ADVANCED_FACE('',(#3153),#3164,.F.);-#3153 = FACE_BOUND('',#3154,.F.);-#3154 = EDGE_LOOP('',(#3155,#3156,#3162,#3163));-#3155 = ORIENTED_EDGE('',*,*,#3034,.T.);-#3156 = ORIENTED_EDGE('',*,*,#3157,.F.);-#3157 = EDGE_CURVE('',#3125,#3035,#3158,.T.);-#3158 = LINE('',#3159,#3160);-#3159 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#3160 = VECTOR('',#3161,1.);-#3161 = DIRECTION('',(0.,-1.,0.));-#3162 = ORIENTED_EDGE('',*,*,#3124,.F.);-#3163 = ORIENTED_EDGE('',*,*,#3098,.T.);-#3164 = PLANE('',#3165);-#3165 = AXIS2_PLACEMENT_3D('',#3166,#3167,#3168);-#3166 = CARTESIAN_POINT('',(-3.205,-2.925,0.15));-#3167 = DIRECTION('',(1.,0.,0.));-#3168 = DIRECTION('',(0.,0.,-1.));-#3169 = ADVANCED_FACE('',(#3170),#3181,.F.);-#3170 = FACE_BOUND('',#3171,.F.);-#3171 = EDGE_LOOP('',(#3172,#3173,#3179,#3180));-#3172 = ORIENTED_EDGE('',*,*,#3042,.T.);-#3173 = ORIENTED_EDGE('',*,*,#3174,.F.);-#3174 = EDGE_CURVE('',#3133,#3043,#3175,.T.);-#3175 = LINE('',#3176,#3177);-#3176 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#3177 = VECTOR('',#3178,1.);-#3178 = DIRECTION('',(0.,-1.,0.));-#3179 = ORIENTED_EDGE('',*,*,#3132,.F.);-#3180 = ORIENTED_EDGE('',*,*,#3157,.T.);+#3110 = DIRECTION('',(0.,0.,-1.));+#3111 = ORIENTED_EDGE('',*,*,#3090,.F.);+#3112 = ORIENTED_EDGE('',*,*,#2979,.F.);+#3113 = ORIENTED_EDGE('',*,*,#3114,.T.);+#3114 = EDGE_CURVE('',#2972,#3105,#3115,.T.);+#3115 = LINE('',#3116,#3117);+#3116 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#3117 = VECTOR('',#3118,1.);+#3118 = DIRECTION('',(0.,-1.,0.));+#3119 = PLANE('',#3120);+#3120 = AXIS2_PLACEMENT_3D('',#3121,#3122,#3123);+#3121 = CARTESIAN_POINT('',(-3.205,-2.925,0.15));+#3122 = DIRECTION('',(1.,0.,0.));+#3123 = DIRECTION('',(0.,0.,-1.));+#3124 = ADVANCED_FACE('',(#3125),#3143,.F.);+#3125 = FACE_BOUND('',#3126,.F.);+#3126 = EDGE_LOOP('',(#3127,#3135,#3136,#3137));+#3127 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3128 = EDGE_CURVE('',#3129,#3105,#3131,.T.);+#3129 = VERTEX_POINT('',#3130);+#3130 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#3131 = LINE('',#3132,#3133);+#3132 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#3133 = VECTOR('',#3134,1.);+#3134 = DIRECTION('',(-1.,0.,0.));+#3135 = ORIENTED_EDGE('',*,*,#3114,.F.);+#3136 = ORIENTED_EDGE('',*,*,#2971,.F.);+#3137 = ORIENTED_EDGE('',*,*,#3138,.T.);+#3138 = EDGE_CURVE('',#2964,#3129,#3139,.T.);+#3139 = LINE('',#3140,#3141);+#3140 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#3141 = VECTOR('',#3142,1.);+#3142 = DIRECTION('',(0.,-1.,0.));+#3143 = PLANE('',#3144);+#3144 = AXIS2_PLACEMENT_3D('',#3145,#3146,#3147);+#3145 = CARTESIAN_POINT('',(-2.6375,-2.925,0.15));+#3146 = DIRECTION('',(-0.,-0.,-1.));+#3147 = DIRECTION('',(-1.,0.,0.));+#3148 = ADVANCED_FACE('',(#3149),#3160,.F.);+#3149 = FACE_BOUND('',#3150,.F.);+#3150 = EDGE_LOOP('',(#3151,#3157,#3158,#3159));+#3151 = ORIENTED_EDGE('',*,*,#3152,.T.);+#3152 = EDGE_CURVE('',#2933,#3129,#3153,.T.);+#3153 = LINE('',#3154,#3155);+#3154 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));+#3155 = VECTOR('',#3156,1.);+#3156 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3157 = ORIENTED_EDGE('',*,*,#3138,.F.);+#3158 = ORIENTED_EDGE('',*,*,#2963,.F.);+#3159 = ORIENTED_EDGE('',*,*,#2940,.T.);+#3160 = PLANE('',#3161);+#3161 = AXIS2_PLACEMENT_3D('',#3162,#3163,#3164);+#3162 = CARTESIAN_POINT('',(-2.35,-2.925,0.595));+#3163 = DIRECTION('',(0.839949759337,0.,-0.542664170358));+#3164 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3165 = ADVANCED_FACE('',(#3166),#3181,.T.);+#3166 = FACE_BOUND('',#3167,.T.);+#3167 = EDGE_LOOP('',(#3168,#3169,#3170,#3171,#3172,#3173,#3174,#3175));+#3168 = ORIENTED_EDGE('',*,*,#2932,.T.);+#3169 = ORIENTED_EDGE('',*,*,#3152,.T.);+#3170 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3171 = ORIENTED_EDGE('',*,*,#3104,.T.);+#3172 = ORIENTED_EDGE('',*,*,#3080,.T.);+#3173 = ORIENTED_EDGE('',*,*,#3056,.T.);+#3174 = ORIENTED_EDGE('',*,*,#3033,.T.);+#3175 = ORIENTED_EDGE('',*,*,#3176,.T.);+#3176 = EDGE_CURVE('',#3034,#2923,#3177,.T.);+#3177 = LINE('',#3178,#3179);+#3178 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#3179 = VECTOR('',#3180,1.);+#3180 = DIRECTION('',(0.,0.,1.)); #3181 = PLANE('',#3182); #3182 = AXIS2_PLACEMENT_3D('',#3183,#3184,#3185);-#3183 = CARTESIAN_POINT('',(-3.205,-2.925,0.));-#3184 = DIRECTION('',(-0.,0.,1.));-#3185 = DIRECTION('',(1.,0.,0.));+#3183 = CARTESIAN_POINT('',(-2.634182274245,-3.075,0.217942023204));+#3184 = DIRECTION('',(-0.,-1.,-0.));+#3185 = DIRECTION('',(0.,0.,-1.)); #3186 = ADVANCED_FACE('',(#3187),#3193,.F.); #3187 = FACE_BOUND('',#3188,.F.); #3188 = EDGE_LOOP('',(#3189,#3190,#3191,#3192));-#3189 = ORIENTED_EDGE('',*,*,#3050,.T.);-#3190 = ORIENTED_EDGE('',*,*,#3073,.T.);-#3191 = ORIENTED_EDGE('',*,*,#3140,.F.);-#3192 = ORIENTED_EDGE('',*,*,#3174,.T.);+#3189 = ORIENTED_EDGE('',*,*,#3041,.F.);+#3190 = ORIENTED_EDGE('',*,*,#3176,.T.);+#3191 = ORIENTED_EDGE('',*,*,#2922,.T.);+#3192 = ORIENTED_EDGE('',*,*,#3011,.F.); #3193 = PLANE('',#3194); #3194 = AXIS2_PLACEMENT_3D('',#3195,#3196,#3197);-#3195 = CARTESIAN_POINT('',(-2.4875,-2.925,0.));-#3196 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#3197 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3195 = CARTESIAN_POINT('',(-2.15,-2.925,0.445));+#3196 = DIRECTION('',(-1.,0.,0.));+#3197 = DIRECTION('',(0.,0.,1.)); #3198 = MANIFOLD_SOLID_BREP('',#3199);-#3199 = CLOSED_SHELL('',(#3200,#3240,#3271,#3302,#3351,#3375,#3399,#3434- ,#3451,#3468));+#3199 = CLOSED_SHELL('',(#3200,#3240,#3271,#3302,#3333,#3364,#3395,#3426+ ,#3447,#3464)); #3200 = ADVANCED_FACE('',(#3201),#3235,.T.); #3201 = FACE_BOUND('',#3202,.T.); #3202 = EDGE_LOOP('',(#3203,#3213,#3221,#3229));@@ -3315,216 +3315,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #3270 = DIRECTION('',(0.,0.,1.)); #3271 = ADVANCED_FACE('',(#3272),#3297,.T.); #3272 = FACE_BOUND('',#3273,.T.);-#3273 = EDGE_LOOP('',(#3274,#3275,#3283,#3291));-#3274 = ORIENTED_EDGE('',*,*,#3214,.F.);-#3275 = ORIENTED_EDGE('',*,*,#3276,.T.);-#3276 = EDGE_CURVE('',#3207,#3277,#3279,.T.);-#3277 = VERTEX_POINT('',#3278);-#3278 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));-#3279 = LINE('',#3280,#3281);-#3280 = CARTESIAN_POINT('',(2.35,-3.075,0.595));-#3281 = VECTOR('',#3282,1.);-#3282 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3283 = ORIENTED_EDGE('',*,*,#3284,.T.);-#3284 = EDGE_CURVE('',#3277,#3285,#3287,.T.);+#3273 = EDGE_LOOP('',(#3274,#3282,#3283,#3291));+#3274 = ORIENTED_EDGE('',*,*,#3275,.T.);+#3275 = EDGE_CURVE('',#3276,#3245,#3278,.T.);+#3276 = VERTEX_POINT('',#3277);+#3277 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#3278 = LINE('',#3279,#3280);+#3279 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#3280 = VECTOR('',#3281,1.);+#3281 = DIRECTION('',(-1.,0.,0.));+#3282 = ORIENTED_EDGE('',*,*,#3261,.F.);+#3283 = ORIENTED_EDGE('',*,*,#3284,.F.);+#3284 = EDGE_CURVE('',#3285,#3254,#3287,.T.); #3285 = VERTEX_POINT('',#3286);-#3286 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#3286 = CARTESIAN_POINT('',(2.2,-2.775,0.445)); #3287 = LINE('',#3288,#3289);-#3288 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#3288 = CARTESIAN_POINT('',(2.2,-2.775,0.445)); #3289 = VECTOR('',#3290,1.);-#3290 = DIRECTION('',(0.,1.,0.));-#3291 = ORIENTED_EDGE('',*,*,#3292,.F.);-#3292 = EDGE_CURVE('',#3215,#3285,#3293,.T.);+#3290 = DIRECTION('',(-1.,0.,0.));+#3291 = ORIENTED_EDGE('',*,*,#3292,.T.);+#3292 = EDGE_CURVE('',#3285,#3276,#3293,.T.); #3293 = LINE('',#3294,#3295);-#3294 = CARTESIAN_POINT('',(2.35,-2.775,0.595));+#3294 = CARTESIAN_POINT('',(2.2,-2.775,0.445)); #3295 = VECTOR('',#3296,1.);-#3296 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3296 = DIRECTION('',(0.,-1.,0.)); #3297 = PLANE('',#3298); #3298 = AXIS2_PLACEMENT_3D('',#3299,#3300,#3301);-#3299 = CARTESIAN_POINT('',(2.35,-2.925,0.595));-#3300 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#3301 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3302 = ADVANCED_FACE('',(#3303),#3346,.F.);-#3303 = FACE_BOUND('',#3304,.F.);-#3304 = EDGE_LOOP('',(#3305,#3306,#3307,#3315,#3323,#3331,#3339,#3345));-#3305 = ORIENTED_EDGE('',*,*,#3204,.T.);-#3306 = ORIENTED_EDGE('',*,*,#3276,.T.);-#3307 = ORIENTED_EDGE('',*,*,#3308,.T.);-#3308 = EDGE_CURVE('',#3277,#3309,#3311,.T.);+#3299 = CARTESIAN_POINT('',(2.2,-2.925,0.445));+#3300 = DIRECTION('',(-0.,-0.,-1.));+#3301 = DIRECTION('',(-1.,0.,0.));+#3302 = ADVANCED_FACE('',(#3303),#3328,.T.);+#3303 = FACE_BOUND('',#3304,.T.);+#3304 = EDGE_LOOP('',(#3305,#3315,#3321,#3322));+#3305 = ORIENTED_EDGE('',*,*,#3306,.F.);+#3306 = EDGE_CURVE('',#3307,#3309,#3311,.T.);+#3307 = VERTEX_POINT('',#3308);+#3308 = CARTESIAN_POINT('',(2.4875,-3.075,0.)); #3309 = VERTEX_POINT('',#3310);-#3310 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#3310 = CARTESIAN_POINT('',(2.4875,-2.775,0.)); #3311 = LINE('',#3312,#3313);-#3312 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#3312 = CARTESIAN_POINT('',(2.4875,-3.075,0.)); #3313 = VECTOR('',#3314,1.);-#3314 = DIRECTION('',(1.,0.,0.));+#3314 = DIRECTION('',(0.,1.,0.)); #3315 = ORIENTED_EDGE('',*,*,#3316,.T.);-#3316 = EDGE_CURVE('',#3309,#3317,#3319,.T.);-#3317 = VERTEX_POINT('',#3318);-#3318 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#3319 = LINE('',#3320,#3321);-#3320 = CARTESIAN_POINT('',(3.205,-3.075,0.15));-#3321 = VECTOR('',#3322,1.);-#3322 = DIRECTION('',(0.,0.,-1.));-#3323 = ORIENTED_EDGE('',*,*,#3324,.T.);-#3324 = EDGE_CURVE('',#3317,#3325,#3327,.T.);-#3325 = VERTEX_POINT('',#3326);-#3326 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#3327 = LINE('',#3328,#3329);-#3328 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#3329 = VECTOR('',#3330,1.);-#3330 = DIRECTION('',(-1.,0.,0.));-#3331 = ORIENTED_EDGE('',*,*,#3332,.T.);-#3332 = EDGE_CURVE('',#3325,#3333,#3335,.T.);-#3333 = VERTEX_POINT('',#3334);-#3334 = CARTESIAN_POINT('',(2.2,-3.075,0.445));-#3335 = LINE('',#3336,#3337);-#3336 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#3337 = VECTOR('',#3338,1.);-#3338 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3339 = ORIENTED_EDGE('',*,*,#3340,.T.);-#3340 = EDGE_CURVE('',#3333,#3245,#3341,.T.);-#3341 = LINE('',#3342,#3343);-#3342 = CARTESIAN_POINT('',(2.2,-3.075,0.445));-#3343 = VECTOR('',#3344,1.);-#3344 = DIRECTION('',(-1.,0.,0.));-#3345 = ORIENTED_EDGE('',*,*,#3244,.T.);-#3346 = PLANE('',#3347);-#3347 = AXIS2_PLACEMENT_3D('',#3348,#3349,#3350);-#3348 = CARTESIAN_POINT('',(2.634182274245,-3.075,0.217942023204));-#3349 = DIRECTION('',(0.,1.,0.));-#3350 = DIRECTION('',(0.,-0.,1.));-#3351 = ADVANCED_FACE('',(#3352),#3370,.T.);-#3352 = FACE_BOUND('',#3353,.T.);-#3353 = EDGE_LOOP('',(#3354,#3355,#3356,#3364));-#3354 = ORIENTED_EDGE('',*,*,#3340,.T.);-#3355 = ORIENTED_EDGE('',*,*,#3261,.F.);-#3356 = ORIENTED_EDGE('',*,*,#3357,.F.);-#3357 = EDGE_CURVE('',#3358,#3254,#3360,.T.);-#3358 = VERTEX_POINT('',#3359);-#3359 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#3360 = LINE('',#3361,#3362);-#3361 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#3362 = VECTOR('',#3363,1.);+#3316 = EDGE_CURVE('',#3307,#3276,#3317,.T.);+#3317 = LINE('',#3318,#3319);+#3318 = CARTESIAN_POINT('',(2.4875,-3.075,0.));+#3319 = VECTOR('',#3320,1.);+#3320 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3321 = ORIENTED_EDGE('',*,*,#3292,.F.);+#3322 = ORIENTED_EDGE('',*,*,#3323,.F.);+#3323 = EDGE_CURVE('',#3309,#3285,#3324,.T.);+#3324 = LINE('',#3325,#3326);+#3325 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#3326 = VECTOR('',#3327,1.);+#3327 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3328 = PLANE('',#3329);+#3329 = AXIS2_PLACEMENT_3D('',#3330,#3331,#3332);+#3330 = CARTESIAN_POINT('',(2.4875,-2.925,0.));+#3331 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#3332 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3333 = ADVANCED_FACE('',(#3334),#3359,.T.);+#3334 = FACE_BOUND('',#3335,.T.);+#3335 = EDGE_LOOP('',(#3336,#3346,#3352,#3353));+#3336 = ORIENTED_EDGE('',*,*,#3337,.F.);+#3337 = EDGE_CURVE('',#3338,#3340,#3342,.T.);+#3338 = VERTEX_POINT('',#3339);+#3339 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#3340 = VERTEX_POINT('',#3341);+#3341 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#3342 = LINE('',#3343,#3344);+#3343 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#3344 = VECTOR('',#3345,1.);+#3345 = DIRECTION('',(0.,1.,0.));+#3346 = ORIENTED_EDGE('',*,*,#3347,.T.);+#3347 = EDGE_CURVE('',#3338,#3307,#3348,.T.);+#3348 = LINE('',#3349,#3350);+#3349 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#3350 = VECTOR('',#3351,1.);+#3351 = DIRECTION('',(-1.,0.,0.));+#3352 = ORIENTED_EDGE('',*,*,#3306,.T.);+#3353 = ORIENTED_EDGE('',*,*,#3354,.F.);+#3354 = EDGE_CURVE('',#3340,#3309,#3355,.T.);+#3355 = LINE('',#3356,#3357);+#3356 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#3357 = VECTOR('',#3358,1.);+#3358 = DIRECTION('',(-1.,0.,0.));+#3359 = PLANE('',#3360);+#3360 = AXIS2_PLACEMENT_3D('',#3361,#3362,#3363);+#3361 = CARTESIAN_POINT('',(3.205,-2.925,0.));+#3362 = DIRECTION('',(-0.,-0.,-1.)); #3363 = DIRECTION('',(-1.,0.,0.));-#3364 = ORIENTED_EDGE('',*,*,#3365,.T.);-#3365 = EDGE_CURVE('',#3358,#3333,#3366,.T.);-#3366 = LINE('',#3367,#3368);-#3367 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#3368 = VECTOR('',#3369,1.);-#3369 = DIRECTION('',(0.,-1.,0.));-#3370 = PLANE('',#3371);-#3371 = AXIS2_PLACEMENT_3D('',#3372,#3373,#3374);-#3372 = CARTESIAN_POINT('',(2.2,-2.925,0.445));-#3373 = DIRECTION('',(-0.,-0.,-1.));-#3374 = DIRECTION('',(-1.,0.,0.));-#3375 = ADVANCED_FACE('',(#3376),#3394,.T.);-#3376 = FACE_BOUND('',#3377,.T.);-#3377 = EDGE_LOOP('',(#3378,#3379,#3380,#3388));-#3378 = ORIENTED_EDGE('',*,*,#3284,.F.);-#3379 = ORIENTED_EDGE('',*,*,#3308,.T.);-#3380 = ORIENTED_EDGE('',*,*,#3381,.T.);-#3381 = EDGE_CURVE('',#3309,#3382,#3384,.T.);-#3382 = VERTEX_POINT('',#3383);-#3383 = CARTESIAN_POINT('',(3.205,-2.775,0.15));-#3384 = LINE('',#3385,#3386);-#3385 = CARTESIAN_POINT('',(3.205,-3.075,0.15));-#3386 = VECTOR('',#3387,1.);-#3387 = DIRECTION('',(0.,1.,0.));-#3388 = ORIENTED_EDGE('',*,*,#3389,.F.);-#3389 = EDGE_CURVE('',#3285,#3382,#3390,.T.);-#3390 = LINE('',#3391,#3392);-#3391 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));-#3392 = VECTOR('',#3393,1.);+#3364 = ADVANCED_FACE('',(#3365),#3390,.T.);+#3365 = FACE_BOUND('',#3366,.T.);+#3366 = EDGE_LOOP('',(#3367,#3377,#3383,#3384));+#3367 = ORIENTED_EDGE('',*,*,#3368,.F.);+#3368 = EDGE_CURVE('',#3369,#3371,#3373,.T.);+#3369 = VERTEX_POINT('',#3370);+#3370 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#3371 = VERTEX_POINT('',#3372);+#3372 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#3373 = LINE('',#3374,#3375);+#3374 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#3375 = VECTOR('',#3376,1.);+#3376 = DIRECTION('',(0.,1.,0.));+#3377 = ORIENTED_EDGE('',*,*,#3378,.T.);+#3378 = EDGE_CURVE('',#3369,#3338,#3379,.T.);+#3379 = LINE('',#3380,#3381);+#3380 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#3381 = VECTOR('',#3382,1.);+#3382 = DIRECTION('',(0.,0.,-1.));+#3383 = ORIENTED_EDGE('',*,*,#3337,.T.);+#3384 = ORIENTED_EDGE('',*,*,#3385,.F.);+#3385 = EDGE_CURVE('',#3371,#3340,#3386,.T.);+#3386 = LINE('',#3387,#3388);+#3387 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#3388 = VECTOR('',#3389,1.);+#3389 = DIRECTION('',(0.,0.,-1.));+#3390 = PLANE('',#3391);+#3391 = AXIS2_PLACEMENT_3D('',#3392,#3393,#3394);+#3392 = CARTESIAN_POINT('',(3.205,-2.925,0.15)); #3393 = DIRECTION('',(1.,0.,0.));-#3394 = PLANE('',#3395);-#3395 = AXIS2_PLACEMENT_3D('',#3396,#3397,#3398);-#3396 = CARTESIAN_POINT('',(2.6375,-2.925,0.15));-#3397 = DIRECTION('',(-0.,0.,1.));-#3398 = DIRECTION('',(1.,0.,0.));-#3399 = ADVANCED_FACE('',(#3400),#3429,.T.);-#3400 = FACE_BOUND('',#3401,.T.);-#3401 = EDGE_LOOP('',(#3402,#3403,#3404,#3405,#3413,#3421,#3427,#3428));-#3402 = ORIENTED_EDGE('',*,*,#3222,.T.);-#3403 = ORIENTED_EDGE('',*,*,#3292,.T.);-#3404 = ORIENTED_EDGE('',*,*,#3389,.T.);-#3405 = ORIENTED_EDGE('',*,*,#3406,.T.);-#3406 = EDGE_CURVE('',#3382,#3407,#3409,.T.);-#3407 = VERTEX_POINT('',#3408);-#3408 = CARTESIAN_POINT('',(3.205,-2.775,0.));-#3409 = LINE('',#3410,#3411);-#3410 = CARTESIAN_POINT('',(3.205,-2.775,0.15));-#3411 = VECTOR('',#3412,1.);-#3412 = DIRECTION('',(0.,0.,-1.));-#3413 = ORIENTED_EDGE('',*,*,#3414,.T.);-#3414 = EDGE_CURVE('',#3407,#3415,#3417,.T.);-#3415 = VERTEX_POINT('',#3416);-#3416 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#3394 = DIRECTION('',(0.,0.,-1.));+#3395 = ADVANCED_FACE('',(#3396),#3421,.T.);+#3396 = FACE_BOUND('',#3397,.T.);+#3397 = EDGE_LOOP('',(#3398,#3408,#3414,#3415));+#3398 = ORIENTED_EDGE('',*,*,#3399,.F.);+#3399 = EDGE_CURVE('',#3400,#3402,#3404,.T.);+#3400 = VERTEX_POINT('',#3401);+#3401 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#3402 = VERTEX_POINT('',#3403);+#3403 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#3404 = LINE('',#3405,#3406);+#3405 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#3406 = VECTOR('',#3407,1.);+#3407 = DIRECTION('',(0.,1.,0.));+#3408 = ORIENTED_EDGE('',*,*,#3409,.T.);+#3409 = EDGE_CURVE('',#3400,#3369,#3410,.T.);+#3410 = LINE('',#3411,#3412);+#3411 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#3412 = VECTOR('',#3413,1.);+#3413 = DIRECTION('',(1.,0.,0.));+#3414 = ORIENTED_EDGE('',*,*,#3368,.T.);+#3415 = ORIENTED_EDGE('',*,*,#3416,.F.);+#3416 = EDGE_CURVE('',#3402,#3371,#3417,.T.); #3417 = LINE('',#3418,#3419);-#3418 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#3418 = CARTESIAN_POINT('',(2.6375,-2.775,0.15)); #3419 = VECTOR('',#3420,1.);-#3420 = DIRECTION('',(-1.,0.,0.));-#3421 = ORIENTED_EDGE('',*,*,#3422,.T.);-#3422 = EDGE_CURVE('',#3415,#3358,#3423,.T.);-#3423 = LINE('',#3424,#3425);-#3424 = CARTESIAN_POINT('',(2.4875,-2.775,0.));-#3425 = VECTOR('',#3426,1.);-#3426 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3427 = ORIENTED_EDGE('',*,*,#3357,.T.);-#3428 = ORIENTED_EDGE('',*,*,#3253,.T.);-#3429 = PLANE('',#3430);-#3430 = AXIS2_PLACEMENT_3D('',#3431,#3432,#3433);-#3431 = CARTESIAN_POINT('',(2.634182274245,-2.775,0.217942023204));-#3432 = DIRECTION('',(0.,1.,0.));-#3433 = DIRECTION('',(0.,-0.,1.));-#3434 = ADVANCED_FACE('',(#3435),#3446,.T.);-#3435 = FACE_BOUND('',#3436,.T.);-#3436 = EDGE_LOOP('',(#3437,#3438,#3439,#3445));-#3437 = ORIENTED_EDGE('',*,*,#3381,.F.);-#3438 = ORIENTED_EDGE('',*,*,#3316,.T.);-#3439 = ORIENTED_EDGE('',*,*,#3440,.T.);-#3440 = EDGE_CURVE('',#3317,#3407,#3441,.T.);-#3441 = LINE('',#3442,#3443);-#3442 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#3443 = VECTOR('',#3444,1.);-#3444 = DIRECTION('',(0.,1.,0.));-#3445 = ORIENTED_EDGE('',*,*,#3406,.F.);-#3446 = PLANE('',#3447);-#3447 = AXIS2_PLACEMENT_3D('',#3448,#3449,#3450);-#3448 = CARTESIAN_POINT('',(3.205,-2.925,0.15));-#3449 = DIRECTION('',(1.,0.,0.));-#3450 = DIRECTION('',(0.,0.,-1.));-#3451 = ADVANCED_FACE('',(#3452),#3463,.T.);-#3452 = FACE_BOUND('',#3453,.T.);-#3453 = EDGE_LOOP('',(#3454,#3455,#3456,#3462));-#3454 = ORIENTED_EDGE('',*,*,#3440,.F.);-#3455 = ORIENTED_EDGE('',*,*,#3324,.T.);-#3456 = ORIENTED_EDGE('',*,*,#3457,.T.);-#3457 = EDGE_CURVE('',#3325,#3415,#3458,.T.);-#3458 = LINE('',#3459,#3460);-#3459 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#3460 = VECTOR('',#3461,1.);-#3461 = DIRECTION('',(0.,1.,0.));-#3462 = ORIENTED_EDGE('',*,*,#3414,.F.);-#3463 = PLANE('',#3464);-#3464 = AXIS2_PLACEMENT_3D('',#3465,#3466,#3467);-#3465 = CARTESIAN_POINT('',(3.205,-2.925,0.));-#3466 = DIRECTION('',(-0.,-0.,-1.));-#3467 = DIRECTION('',(-1.,0.,0.));-#3468 = ADVANCED_FACE('',(#3469),#3475,.T.);-#3469 = FACE_BOUND('',#3470,.T.);-#3470 = EDGE_LOOP('',(#3471,#3472,#3473,#3474));-#3471 = ORIENTED_EDGE('',*,*,#3457,.F.);-#3472 = ORIENTED_EDGE('',*,*,#3332,.T.);-#3473 = ORIENTED_EDGE('',*,*,#3365,.F.);-#3474 = ORIENTED_EDGE('',*,*,#3422,.F.);+#3420 = DIRECTION('',(1.,0.,0.));+#3421 = PLANE('',#3422);+#3422 = AXIS2_PLACEMENT_3D('',#3423,#3424,#3425);+#3423 = CARTESIAN_POINT('',(2.6375,-2.925,0.15));+#3424 = DIRECTION('',(-0.,0.,1.));+#3425 = DIRECTION('',(1.,0.,0.));+#3426 = ADVANCED_FACE('',(#3427),#3442,.T.);+#3427 = FACE_BOUND('',#3428,.T.);+#3428 = EDGE_LOOP('',(#3429,#3430,#3436,#3437,#3438,#3439,#3440,#3441));+#3429 = ORIENTED_EDGE('',*,*,#3222,.T.);+#3430 = ORIENTED_EDGE('',*,*,#3431,.T.);+#3431 = EDGE_CURVE('',#3215,#3402,#3432,.T.);+#3432 = LINE('',#3433,#3434);+#3433 = CARTESIAN_POINT('',(2.35,-2.775,0.595));+#3434 = VECTOR('',#3435,1.);+#3435 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3436 = ORIENTED_EDGE('',*,*,#3416,.T.);+#3437 = ORIENTED_EDGE('',*,*,#3385,.T.);+#3438 = ORIENTED_EDGE('',*,*,#3354,.T.);+#3439 = ORIENTED_EDGE('',*,*,#3323,.T.);+#3440 = ORIENTED_EDGE('',*,*,#3284,.T.);+#3441 = ORIENTED_EDGE('',*,*,#3253,.T.);+#3442 = PLANE('',#3443);+#3443 = AXIS2_PLACEMENT_3D('',#3444,#3445,#3446);+#3444 = CARTESIAN_POINT('',(2.634182274245,-2.775,0.217942023204));+#3445 = DIRECTION('',(0.,1.,0.));+#3446 = DIRECTION('',(0.,-0.,1.));+#3447 = ADVANCED_FACE('',(#3448),#3459,.T.);+#3448 = FACE_BOUND('',#3449,.T.);+#3449 = EDGE_LOOP('',(#3450,#3451,#3457,#3458));+#3450 = ORIENTED_EDGE('',*,*,#3214,.F.);+#3451 = ORIENTED_EDGE('',*,*,#3452,.T.);+#3452 = EDGE_CURVE('',#3207,#3400,#3453,.T.);+#3453 = LINE('',#3454,#3455);+#3454 = CARTESIAN_POINT('',(2.35,-3.075,0.595));+#3455 = VECTOR('',#3456,1.);+#3456 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3457 = ORIENTED_EDGE('',*,*,#3399,.T.);+#3458 = ORIENTED_EDGE('',*,*,#3431,.F.);+#3459 = PLANE('',#3460);+#3460 = AXIS2_PLACEMENT_3D('',#3461,#3462,#3463);+#3461 = CARTESIAN_POINT('',(2.35,-2.925,0.595));+#3462 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#3463 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3464 = ADVANCED_FACE('',(#3465),#3475,.F.);+#3465 = FACE_BOUND('',#3466,.F.);+#3466 = EDGE_LOOP('',(#3467,#3468,#3469,#3470,#3471,#3472,#3473,#3474));+#3467 = ORIENTED_EDGE('',*,*,#3204,.T.);+#3468 = ORIENTED_EDGE('',*,*,#3452,.T.);+#3469 = ORIENTED_EDGE('',*,*,#3409,.T.);+#3470 = ORIENTED_EDGE('',*,*,#3378,.T.);+#3471 = ORIENTED_EDGE('',*,*,#3347,.T.);+#3472 = ORIENTED_EDGE('',*,*,#3316,.T.);+#3473 = ORIENTED_EDGE('',*,*,#3275,.T.);+#3474 = ORIENTED_EDGE('',*,*,#3244,.T.); #3475 = PLANE('',#3476); #3476 = AXIS2_PLACEMENT_3D('',#3477,#3478,#3479);-#3477 = CARTESIAN_POINT('',(2.4875,-2.925,0.));-#3478 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#3479 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3477 = CARTESIAN_POINT('',(2.634182274245,-3.075,0.217942023204));+#3478 = DIRECTION('',(0.,1.,0.));+#3479 = DIRECTION('',(0.,-0.,1.)); #3480 = MANIFOLD_SOLID_BREP('',#3481);-#3481 = CLOSED_SHELL('',(#3482,#3522,#3553,#3584,#3633,#3657,#3681,#3716- ,#3733,#3750));+#3481 = CLOSED_SHELL('',(#3482,#3522,#3553,#3584,#3615,#3646,#3677,#3708+ ,#3729,#3746)); #3482 = ADVANCED_FACE('',(#3483),#3517,.T.); #3483 = FACE_BOUND('',#3484,.T.); #3484 = EDGE_LOOP('',(#3485,#3495,#3503,#3511));@@ -3598,216 +3598,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #3552 = DIRECTION('',(0.,0.,1.)); #3553 = ADVANCED_FACE('',(#3554),#3579,.T.); #3554 = FACE_BOUND('',#3555,.T.);-#3555 = EDGE_LOOP('',(#3556,#3557,#3565,#3573));-#3556 = ORIENTED_EDGE('',*,*,#3496,.F.);-#3557 = ORIENTED_EDGE('',*,*,#3558,.T.);-#3558 = EDGE_CURVE('',#3489,#3559,#3561,.T.);-#3559 = VERTEX_POINT('',#3560);-#3560 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));-#3561 = LINE('',#3562,#3563);-#3562 = CARTESIAN_POINT('',(2.35,-2.425,0.595));-#3563 = VECTOR('',#3564,1.);-#3564 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3565 = ORIENTED_EDGE('',*,*,#3566,.T.);-#3566 = EDGE_CURVE('',#3559,#3567,#3569,.T.);+#3555 = EDGE_LOOP('',(#3556,#3564,#3565,#3573));+#3556 = ORIENTED_EDGE('',*,*,#3557,.T.);+#3557 = EDGE_CURVE('',#3558,#3527,#3560,.T.);+#3558 = VERTEX_POINT('',#3559);+#3559 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#3560 = LINE('',#3561,#3562);+#3561 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#3562 = VECTOR('',#3563,1.);+#3563 = DIRECTION('',(-1.,0.,0.));+#3564 = ORIENTED_EDGE('',*,*,#3543,.F.);+#3565 = ORIENTED_EDGE('',*,*,#3566,.F.);+#3566 = EDGE_CURVE('',#3567,#3536,#3569,.T.); #3567 = VERTEX_POINT('',#3568);-#3568 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#3568 = CARTESIAN_POINT('',(2.2,-2.125,0.445)); #3569 = LINE('',#3570,#3571);-#3570 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#3570 = CARTESIAN_POINT('',(2.2,-2.125,0.445)); #3571 = VECTOR('',#3572,1.);-#3572 = DIRECTION('',(0.,1.,0.));-#3573 = ORIENTED_EDGE('',*,*,#3574,.F.);-#3574 = EDGE_CURVE('',#3497,#3567,#3575,.T.);+#3572 = DIRECTION('',(-1.,0.,0.));+#3573 = ORIENTED_EDGE('',*,*,#3574,.T.);+#3574 = EDGE_CURVE('',#3567,#3558,#3575,.T.); #3575 = LINE('',#3576,#3577);-#3576 = CARTESIAN_POINT('',(2.35,-2.125,0.595));+#3576 = CARTESIAN_POINT('',(2.2,-2.125,0.445)); #3577 = VECTOR('',#3578,1.);-#3578 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3578 = DIRECTION('',(0.,-1.,0.)); #3579 = PLANE('',#3580); #3580 = AXIS2_PLACEMENT_3D('',#3581,#3582,#3583);-#3581 = CARTESIAN_POINT('',(2.35,-2.275,0.595));-#3582 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#3583 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3584 = ADVANCED_FACE('',(#3585),#3628,.F.);-#3585 = FACE_BOUND('',#3586,.F.);-#3586 = EDGE_LOOP('',(#3587,#3588,#3589,#3597,#3605,#3613,#3621,#3627));-#3587 = ORIENTED_EDGE('',*,*,#3486,.T.);-#3588 = ORIENTED_EDGE('',*,*,#3558,.T.);-#3589 = ORIENTED_EDGE('',*,*,#3590,.T.);-#3590 = EDGE_CURVE('',#3559,#3591,#3593,.T.);+#3581 = CARTESIAN_POINT('',(2.2,-2.275,0.445));+#3582 = DIRECTION('',(-0.,-0.,-1.));+#3583 = DIRECTION('',(-1.,0.,0.));+#3584 = ADVANCED_FACE('',(#3585),#3610,.T.);+#3585 = FACE_BOUND('',#3586,.T.);+#3586 = EDGE_LOOP('',(#3587,#3597,#3603,#3604));+#3587 = ORIENTED_EDGE('',*,*,#3588,.F.);+#3588 = EDGE_CURVE('',#3589,#3591,#3593,.T.);+#3589 = VERTEX_POINT('',#3590);+#3590 = CARTESIAN_POINT('',(2.4875,-2.425,0.)); #3591 = VERTEX_POINT('',#3592);-#3592 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#3592 = CARTESIAN_POINT('',(2.4875,-2.125,0.)); #3593 = LINE('',#3594,#3595);-#3594 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#3594 = CARTESIAN_POINT('',(2.4875,-2.425,0.)); #3595 = VECTOR('',#3596,1.);-#3596 = DIRECTION('',(1.,0.,0.));+#3596 = DIRECTION('',(0.,1.,0.)); #3597 = ORIENTED_EDGE('',*,*,#3598,.T.);-#3598 = EDGE_CURVE('',#3591,#3599,#3601,.T.);-#3599 = VERTEX_POINT('',#3600);-#3600 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#3601 = LINE('',#3602,#3603);-#3602 = CARTESIAN_POINT('',(3.205,-2.425,0.15));-#3603 = VECTOR('',#3604,1.);-#3604 = DIRECTION('',(0.,0.,-1.));-#3605 = ORIENTED_EDGE('',*,*,#3606,.T.);-#3606 = EDGE_CURVE('',#3599,#3607,#3609,.T.);-#3607 = VERTEX_POINT('',#3608);-#3608 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#3609 = LINE('',#3610,#3611);-#3610 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#3611 = VECTOR('',#3612,1.);-#3612 = DIRECTION('',(-1.,0.,0.));-#3613 = ORIENTED_EDGE('',*,*,#3614,.T.);-#3614 = EDGE_CURVE('',#3607,#3615,#3617,.T.);-#3615 = VERTEX_POINT('',#3616);-#3616 = CARTESIAN_POINT('',(2.2,-2.425,0.445));-#3617 = LINE('',#3618,#3619);-#3618 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#3619 = VECTOR('',#3620,1.);-#3620 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3621 = ORIENTED_EDGE('',*,*,#3622,.T.);-#3622 = EDGE_CURVE('',#3615,#3527,#3623,.T.);-#3623 = LINE('',#3624,#3625);-#3624 = CARTESIAN_POINT('',(2.2,-2.425,0.445));-#3625 = VECTOR('',#3626,1.);-#3626 = DIRECTION('',(-1.,0.,0.));-#3627 = ORIENTED_EDGE('',*,*,#3526,.T.);-#3628 = PLANE('',#3629);-#3629 = AXIS2_PLACEMENT_3D('',#3630,#3631,#3632);-#3630 = CARTESIAN_POINT('',(2.634182274245,-2.425,0.217942023204));-#3631 = DIRECTION('',(0.,1.,0.));-#3632 = DIRECTION('',(0.,-0.,1.));-#3633 = ADVANCED_FACE('',(#3634),#3652,.T.);-#3634 = FACE_BOUND('',#3635,.T.);-#3635 = EDGE_LOOP('',(#3636,#3637,#3638,#3646));-#3636 = ORIENTED_EDGE('',*,*,#3622,.T.);-#3637 = ORIENTED_EDGE('',*,*,#3543,.F.);-#3638 = ORIENTED_EDGE('',*,*,#3639,.F.);-#3639 = EDGE_CURVE('',#3640,#3536,#3642,.T.);-#3640 = VERTEX_POINT('',#3641);-#3641 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#3642 = LINE('',#3643,#3644);-#3643 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#3644 = VECTOR('',#3645,1.);+#3598 = EDGE_CURVE('',#3589,#3558,#3599,.T.);+#3599 = LINE('',#3600,#3601);+#3600 = CARTESIAN_POINT('',(2.4875,-2.425,0.));+#3601 = VECTOR('',#3602,1.);+#3602 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3603 = ORIENTED_EDGE('',*,*,#3574,.F.);+#3604 = ORIENTED_EDGE('',*,*,#3605,.F.);+#3605 = EDGE_CURVE('',#3591,#3567,#3606,.T.);+#3606 = LINE('',#3607,#3608);+#3607 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#3608 = VECTOR('',#3609,1.);+#3609 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3610 = PLANE('',#3611);+#3611 = AXIS2_PLACEMENT_3D('',#3612,#3613,#3614);+#3612 = CARTESIAN_POINT('',(2.4875,-2.275,0.));+#3613 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#3614 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3615 = ADVANCED_FACE('',(#3616),#3641,.T.);+#3616 = FACE_BOUND('',#3617,.T.);+#3617 = EDGE_LOOP('',(#3618,#3628,#3634,#3635));+#3618 = ORIENTED_EDGE('',*,*,#3619,.F.);+#3619 = EDGE_CURVE('',#3620,#3622,#3624,.T.);+#3620 = VERTEX_POINT('',#3621);+#3621 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#3622 = VERTEX_POINT('',#3623);+#3623 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#3624 = LINE('',#3625,#3626);+#3625 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#3626 = VECTOR('',#3627,1.);+#3627 = DIRECTION('',(0.,1.,0.));+#3628 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3629 = EDGE_CURVE('',#3620,#3589,#3630,.T.);+#3630 = LINE('',#3631,#3632);+#3631 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#3632 = VECTOR('',#3633,1.);+#3633 = DIRECTION('',(-1.,0.,0.));+#3634 = ORIENTED_EDGE('',*,*,#3588,.T.);+#3635 = ORIENTED_EDGE('',*,*,#3636,.F.);+#3636 = EDGE_CURVE('',#3622,#3591,#3637,.T.);+#3637 = LINE('',#3638,#3639);+#3638 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#3639 = VECTOR('',#3640,1.);+#3640 = DIRECTION('',(-1.,0.,0.));+#3641 = PLANE('',#3642);+#3642 = AXIS2_PLACEMENT_3D('',#3643,#3644,#3645);+#3643 = CARTESIAN_POINT('',(3.205,-2.275,0.));+#3644 = DIRECTION('',(-0.,-0.,-1.)); #3645 = DIRECTION('',(-1.,0.,0.));-#3646 = ORIENTED_EDGE('',*,*,#3647,.T.);-#3647 = EDGE_CURVE('',#3640,#3615,#3648,.T.);-#3648 = LINE('',#3649,#3650);-#3649 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#3650 = VECTOR('',#3651,1.);-#3651 = DIRECTION('',(0.,-1.,0.));-#3652 = PLANE('',#3653);-#3653 = AXIS2_PLACEMENT_3D('',#3654,#3655,#3656);-#3654 = CARTESIAN_POINT('',(2.2,-2.275,0.445));-#3655 = DIRECTION('',(-0.,-0.,-1.));-#3656 = DIRECTION('',(-1.,0.,0.));-#3657 = ADVANCED_FACE('',(#3658),#3676,.T.);-#3658 = FACE_BOUND('',#3659,.T.);-#3659 = EDGE_LOOP('',(#3660,#3661,#3662,#3670));-#3660 = ORIENTED_EDGE('',*,*,#3566,.F.);-#3661 = ORIENTED_EDGE('',*,*,#3590,.T.);-#3662 = ORIENTED_EDGE('',*,*,#3663,.T.);-#3663 = EDGE_CURVE('',#3591,#3664,#3666,.T.);-#3664 = VERTEX_POINT('',#3665);-#3665 = CARTESIAN_POINT('',(3.205,-2.125,0.15));-#3666 = LINE('',#3667,#3668);-#3667 = CARTESIAN_POINT('',(3.205,-2.425,0.15));-#3668 = VECTOR('',#3669,1.);-#3669 = DIRECTION('',(0.,1.,0.));-#3670 = ORIENTED_EDGE('',*,*,#3671,.F.);-#3671 = EDGE_CURVE('',#3567,#3664,#3672,.T.);-#3672 = LINE('',#3673,#3674);-#3673 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));-#3674 = VECTOR('',#3675,1.);+#3646 = ADVANCED_FACE('',(#3647),#3672,.T.);+#3647 = FACE_BOUND('',#3648,.T.);+#3648 = EDGE_LOOP('',(#3649,#3659,#3665,#3666));+#3649 = ORIENTED_EDGE('',*,*,#3650,.F.);+#3650 = EDGE_CURVE('',#3651,#3653,#3655,.T.);+#3651 = VERTEX_POINT('',#3652);+#3652 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#3653 = VERTEX_POINT('',#3654);+#3654 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#3655 = LINE('',#3656,#3657);+#3656 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#3657 = VECTOR('',#3658,1.);+#3658 = DIRECTION('',(0.,1.,0.));+#3659 = ORIENTED_EDGE('',*,*,#3660,.T.);+#3660 = EDGE_CURVE('',#3651,#3620,#3661,.T.);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(0.,0.,-1.));+#3665 = ORIENTED_EDGE('',*,*,#3619,.T.);+#3666 = ORIENTED_EDGE('',*,*,#3667,.F.);+#3667 = EDGE_CURVE('',#3653,#3622,#3668,.T.);+#3668 = LINE('',#3669,#3670);+#3669 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#3670 = VECTOR('',#3671,1.);+#3671 = DIRECTION('',(0.,0.,-1.));+#3672 = PLANE('',#3673);+#3673 = AXIS2_PLACEMENT_3D('',#3674,#3675,#3676);+#3674 = CARTESIAN_POINT('',(3.205,-2.275,0.15)); #3675 = DIRECTION('',(1.,0.,0.));-#3676 = PLANE('',#3677);-#3677 = AXIS2_PLACEMENT_3D('',#3678,#3679,#3680);-#3678 = CARTESIAN_POINT('',(2.6375,-2.275,0.15));-#3679 = DIRECTION('',(-0.,0.,1.));-#3680 = DIRECTION('',(1.,0.,0.));-#3681 = ADVANCED_FACE('',(#3682),#3711,.T.);-#3682 = FACE_BOUND('',#3683,.T.);-#3683 = EDGE_LOOP('',(#3684,#3685,#3686,#3687,#3695,#3703,#3709,#3710));-#3684 = ORIENTED_EDGE('',*,*,#3504,.T.);-#3685 = ORIENTED_EDGE('',*,*,#3574,.T.);-#3686 = ORIENTED_EDGE('',*,*,#3671,.T.);-#3687 = ORIENTED_EDGE('',*,*,#3688,.T.);-#3688 = EDGE_CURVE('',#3664,#3689,#3691,.T.);-#3689 = VERTEX_POINT('',#3690);-#3690 = CARTESIAN_POINT('',(3.205,-2.125,0.));-#3691 = LINE('',#3692,#3693);-#3692 = CARTESIAN_POINT('',(3.205,-2.125,0.15));-#3693 = VECTOR('',#3694,1.);-#3694 = DIRECTION('',(0.,0.,-1.));-#3695 = ORIENTED_EDGE('',*,*,#3696,.T.);-#3696 = EDGE_CURVE('',#3689,#3697,#3699,.T.);-#3697 = VERTEX_POINT('',#3698);-#3698 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#3676 = DIRECTION('',(0.,0.,-1.));+#3677 = ADVANCED_FACE('',(#3678),#3703,.T.);+#3678 = FACE_BOUND('',#3679,.T.);+#3679 = EDGE_LOOP('',(#3680,#3690,#3696,#3697));+#3680 = ORIENTED_EDGE('',*,*,#3681,.F.);+#3681 = EDGE_CURVE('',#3682,#3684,#3686,.T.);+#3682 = VERTEX_POINT('',#3683);+#3683 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#3684 = VERTEX_POINT('',#3685);+#3685 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#3686 = LINE('',#3687,#3688);+#3687 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#3688 = VECTOR('',#3689,1.);+#3689 = DIRECTION('',(0.,1.,0.));+#3690 = ORIENTED_EDGE('',*,*,#3691,.T.);+#3691 = EDGE_CURVE('',#3682,#3651,#3692,.T.);+#3692 = LINE('',#3693,#3694);+#3693 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#3694 = VECTOR('',#3695,1.);+#3695 = DIRECTION('',(1.,0.,0.));+#3696 = ORIENTED_EDGE('',*,*,#3650,.T.);+#3697 = ORIENTED_EDGE('',*,*,#3698,.F.);+#3698 = EDGE_CURVE('',#3684,#3653,#3699,.T.); #3699 = LINE('',#3700,#3701);-#3700 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#3700 = CARTESIAN_POINT('',(2.6375,-2.125,0.15)); #3701 = VECTOR('',#3702,1.);-#3702 = DIRECTION('',(-1.,0.,0.));-#3703 = ORIENTED_EDGE('',*,*,#3704,.T.);-#3704 = EDGE_CURVE('',#3697,#3640,#3705,.T.);-#3705 = LINE('',#3706,#3707);-#3706 = CARTESIAN_POINT('',(2.4875,-2.125,0.));-#3707 = VECTOR('',#3708,1.);-#3708 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3709 = ORIENTED_EDGE('',*,*,#3639,.T.);-#3710 = ORIENTED_EDGE('',*,*,#3535,.T.);-#3711 = PLANE('',#3712);-#3712 = AXIS2_PLACEMENT_3D('',#3713,#3714,#3715);-#3713 = CARTESIAN_POINT('',(2.634182274245,-2.125,0.217942023204));-#3714 = DIRECTION('',(0.,1.,0.));-#3715 = DIRECTION('',(0.,-0.,1.));-#3716 = ADVANCED_FACE('',(#3717),#3728,.T.);-#3717 = FACE_BOUND('',#3718,.T.);-#3718 = EDGE_LOOP('',(#3719,#3720,#3721,#3727));-#3719 = ORIENTED_EDGE('',*,*,#3663,.F.);-#3720 = ORIENTED_EDGE('',*,*,#3598,.T.);-#3721 = ORIENTED_EDGE('',*,*,#3722,.T.);-#3722 = EDGE_CURVE('',#3599,#3689,#3723,.T.);-#3723 = LINE('',#3724,#3725);-#3724 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#3725 = VECTOR('',#3726,1.);-#3726 = DIRECTION('',(0.,1.,0.));-#3727 = ORIENTED_EDGE('',*,*,#3688,.F.);-#3728 = PLANE('',#3729);-#3729 = AXIS2_PLACEMENT_3D('',#3730,#3731,#3732);-#3730 = CARTESIAN_POINT('',(3.205,-2.275,0.15));-#3731 = DIRECTION('',(1.,0.,0.));-#3732 = DIRECTION('',(0.,0.,-1.));-#3733 = ADVANCED_FACE('',(#3734),#3745,.T.);-#3734 = FACE_BOUND('',#3735,.T.);-#3735 = EDGE_LOOP('',(#3736,#3737,#3738,#3744));-#3736 = ORIENTED_EDGE('',*,*,#3722,.F.);-#3737 = ORIENTED_EDGE('',*,*,#3606,.T.);-#3738 = ORIENTED_EDGE('',*,*,#3739,.T.);-#3739 = EDGE_CURVE('',#3607,#3697,#3740,.T.);-#3740 = LINE('',#3741,#3742);-#3741 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#3742 = VECTOR('',#3743,1.);-#3743 = DIRECTION('',(0.,1.,0.));-#3744 = ORIENTED_EDGE('',*,*,#3696,.F.);-#3745 = PLANE('',#3746);-#3746 = AXIS2_PLACEMENT_3D('',#3747,#3748,#3749);-#3747 = CARTESIAN_POINT('',(3.205,-2.275,0.));-#3748 = DIRECTION('',(-0.,-0.,-1.));-#3749 = DIRECTION('',(-1.,0.,0.));-#3750 = ADVANCED_FACE('',(#3751),#3757,.T.);-#3751 = FACE_BOUND('',#3752,.T.);-#3752 = EDGE_LOOP('',(#3753,#3754,#3755,#3756));-#3753 = ORIENTED_EDGE('',*,*,#3739,.F.);-#3754 = ORIENTED_EDGE('',*,*,#3614,.T.);-#3755 = ORIENTED_EDGE('',*,*,#3647,.F.);-#3756 = ORIENTED_EDGE('',*,*,#3704,.F.);+#3702 = DIRECTION('',(1.,0.,0.));+#3703 = PLANE('',#3704);+#3704 = AXIS2_PLACEMENT_3D('',#3705,#3706,#3707);+#3705 = CARTESIAN_POINT('',(2.6375,-2.275,0.15));+#3706 = DIRECTION('',(-0.,0.,1.));+#3707 = DIRECTION('',(1.,0.,0.));+#3708 = ADVANCED_FACE('',(#3709),#3724,.T.);+#3709 = FACE_BOUND('',#3710,.T.);+#3710 = EDGE_LOOP('',(#3711,#3712,#3718,#3719,#3720,#3721,#3722,#3723));+#3711 = ORIENTED_EDGE('',*,*,#3504,.T.);+#3712 = ORIENTED_EDGE('',*,*,#3713,.T.);+#3713 = EDGE_CURVE('',#3497,#3684,#3714,.T.);+#3714 = LINE('',#3715,#3716);+#3715 = CARTESIAN_POINT('',(2.35,-2.125,0.595));+#3716 = VECTOR('',#3717,1.);+#3717 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3718 = ORIENTED_EDGE('',*,*,#3698,.T.);+#3719 = ORIENTED_EDGE('',*,*,#3667,.T.);+#3720 = ORIENTED_EDGE('',*,*,#3636,.T.);+#3721 = ORIENTED_EDGE('',*,*,#3605,.T.);+#3722 = ORIENTED_EDGE('',*,*,#3566,.T.);+#3723 = ORIENTED_EDGE('',*,*,#3535,.T.);+#3724 = PLANE('',#3725);+#3725 = AXIS2_PLACEMENT_3D('',#3726,#3727,#3728);+#3726 = CARTESIAN_POINT('',(2.634182274245,-2.125,0.217942023204));+#3727 = DIRECTION('',(0.,1.,0.));+#3728 = DIRECTION('',(0.,-0.,1.));+#3729 = ADVANCED_FACE('',(#3730),#3741,.T.);+#3730 = FACE_BOUND('',#3731,.T.);+#3731 = EDGE_LOOP('',(#3732,#3733,#3739,#3740));+#3732 = ORIENTED_EDGE('',*,*,#3496,.F.);+#3733 = ORIENTED_EDGE('',*,*,#3734,.T.);+#3734 = EDGE_CURVE('',#3489,#3682,#3735,.T.);+#3735 = LINE('',#3736,#3737);+#3736 = CARTESIAN_POINT('',(2.35,-2.425,0.595));+#3737 = VECTOR('',#3738,1.);+#3738 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3739 = ORIENTED_EDGE('',*,*,#3681,.T.);+#3740 = ORIENTED_EDGE('',*,*,#3713,.F.);+#3741 = PLANE('',#3742);+#3742 = AXIS2_PLACEMENT_3D('',#3743,#3744,#3745);+#3743 = CARTESIAN_POINT('',(2.35,-2.275,0.595));+#3744 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#3745 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3746 = ADVANCED_FACE('',(#3747),#3757,.F.);+#3747 = FACE_BOUND('',#3748,.F.);+#3748 = EDGE_LOOP('',(#3749,#3750,#3751,#3752,#3753,#3754,#3755,#3756));+#3749 = ORIENTED_EDGE('',*,*,#3486,.T.);+#3750 = ORIENTED_EDGE('',*,*,#3734,.T.);+#3751 = ORIENTED_EDGE('',*,*,#3691,.T.);+#3752 = ORIENTED_EDGE('',*,*,#3660,.T.);+#3753 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3754 = ORIENTED_EDGE('',*,*,#3598,.T.);+#3755 = ORIENTED_EDGE('',*,*,#3557,.T.);+#3756 = ORIENTED_EDGE('',*,*,#3526,.T.); #3757 = PLANE('',#3758); #3758 = AXIS2_PLACEMENT_3D('',#3759,#3760,#3761);-#3759 = CARTESIAN_POINT('',(2.4875,-2.275,0.));-#3760 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#3761 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3759 = CARTESIAN_POINT('',(2.634182274245,-2.425,0.217942023204));+#3760 = DIRECTION('',(0.,1.,0.));+#3761 = DIRECTION('',(0.,-0.,1.)); #3762 = MANIFOLD_SOLID_BREP('',#3763);-#3763 = CLOSED_SHELL('',(#3764,#3804,#3835,#3866,#3915,#3939,#3963,#3998- ,#4015,#4032));+#3763 = CLOSED_SHELL('',(#3764,#3804,#3835,#3866,#3897,#3928,#3959,#3990+ ,#4011,#4028)); #3764 = ADVANCED_FACE('',(#3765),#3799,.T.); #3765 = FACE_BOUND('',#3766,.T.); #3766 = EDGE_LOOP('',(#3767,#3777,#3785,#3793));@@ -3881,216 +3881,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #3834 = DIRECTION('',(0.,0.,1.)); #3835 = ADVANCED_FACE('',(#3836),#3861,.T.); #3836 = FACE_BOUND('',#3837,.T.);-#3837 = EDGE_LOOP('',(#3838,#3839,#3847,#3855));-#3838 = ORIENTED_EDGE('',*,*,#3778,.F.);-#3839 = ORIENTED_EDGE('',*,*,#3840,.T.);-#3840 = EDGE_CURVE('',#3771,#3841,#3843,.T.);-#3841 = VERTEX_POINT('',#3842);-#3842 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));-#3843 = LINE('',#3844,#3845);-#3844 = CARTESIAN_POINT('',(2.35,-1.775,0.595));-#3845 = VECTOR('',#3846,1.);-#3846 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3847 = ORIENTED_EDGE('',*,*,#3848,.T.);-#3848 = EDGE_CURVE('',#3841,#3849,#3851,.T.);+#3837 = EDGE_LOOP('',(#3838,#3846,#3847,#3855));+#3838 = ORIENTED_EDGE('',*,*,#3839,.T.);+#3839 = EDGE_CURVE('',#3840,#3809,#3842,.T.);+#3840 = VERTEX_POINT('',#3841);+#3841 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#3842 = LINE('',#3843,#3844);+#3843 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#3844 = VECTOR('',#3845,1.);+#3845 = DIRECTION('',(-1.,0.,0.));+#3846 = ORIENTED_EDGE('',*,*,#3825,.F.);+#3847 = ORIENTED_EDGE('',*,*,#3848,.F.);+#3848 = EDGE_CURVE('',#3849,#3818,#3851,.T.); #3849 = VERTEX_POINT('',#3850);-#3850 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#3850 = CARTESIAN_POINT('',(2.2,-1.475,0.445)); #3851 = LINE('',#3852,#3853);-#3852 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#3852 = CARTESIAN_POINT('',(2.2,-1.475,0.445)); #3853 = VECTOR('',#3854,1.);-#3854 = DIRECTION('',(0.,1.,0.));-#3855 = ORIENTED_EDGE('',*,*,#3856,.F.);-#3856 = EDGE_CURVE('',#3779,#3849,#3857,.T.);+#3854 = DIRECTION('',(-1.,0.,0.));+#3855 = ORIENTED_EDGE('',*,*,#3856,.T.);+#3856 = EDGE_CURVE('',#3849,#3840,#3857,.T.); #3857 = LINE('',#3858,#3859);-#3858 = CARTESIAN_POINT('',(2.35,-1.475,0.595));+#3858 = CARTESIAN_POINT('',(2.2,-1.475,0.445)); #3859 = VECTOR('',#3860,1.);-#3860 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#3860 = DIRECTION('',(0.,-1.,0.)); #3861 = PLANE('',#3862); #3862 = AXIS2_PLACEMENT_3D('',#3863,#3864,#3865);-#3863 = CARTESIAN_POINT('',(2.35,-1.625,0.595));-#3864 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#3865 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#3866 = ADVANCED_FACE('',(#3867),#3910,.F.);-#3867 = FACE_BOUND('',#3868,.F.);-#3868 = EDGE_LOOP('',(#3869,#3870,#3871,#3879,#3887,#3895,#3903,#3909));-#3869 = ORIENTED_EDGE('',*,*,#3768,.T.);-#3870 = ORIENTED_EDGE('',*,*,#3840,.T.);-#3871 = ORIENTED_EDGE('',*,*,#3872,.T.);-#3872 = EDGE_CURVE('',#3841,#3873,#3875,.T.);+#3863 = CARTESIAN_POINT('',(2.2,-1.625,0.445));+#3864 = DIRECTION('',(-0.,-0.,-1.));+#3865 = DIRECTION('',(-1.,0.,0.));+#3866 = ADVANCED_FACE('',(#3867),#3892,.T.);+#3867 = FACE_BOUND('',#3868,.T.);+#3868 = EDGE_LOOP('',(#3869,#3879,#3885,#3886));+#3869 = ORIENTED_EDGE('',*,*,#3870,.F.);+#3870 = EDGE_CURVE('',#3871,#3873,#3875,.T.);+#3871 = VERTEX_POINT('',#3872);+#3872 = CARTESIAN_POINT('',(2.4875,-1.775,0.)); #3873 = VERTEX_POINT('',#3874);-#3874 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#3874 = CARTESIAN_POINT('',(2.4875,-1.475,0.)); #3875 = LINE('',#3876,#3877);-#3876 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#3876 = CARTESIAN_POINT('',(2.4875,-1.775,0.)); #3877 = VECTOR('',#3878,1.);-#3878 = DIRECTION('',(1.,0.,0.));+#3878 = DIRECTION('',(0.,1.,0.)); #3879 = ORIENTED_EDGE('',*,*,#3880,.T.);-#3880 = EDGE_CURVE('',#3873,#3881,#3883,.T.);-#3881 = VERTEX_POINT('',#3882);-#3882 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#3883 = LINE('',#3884,#3885);-#3884 = CARTESIAN_POINT('',(3.205,-1.775,0.15));-#3885 = VECTOR('',#3886,1.);-#3886 = DIRECTION('',(0.,0.,-1.));-#3887 = ORIENTED_EDGE('',*,*,#3888,.T.);-#3888 = EDGE_CURVE('',#3881,#3889,#3891,.T.);-#3889 = VERTEX_POINT('',#3890);-#3890 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#3891 = LINE('',#3892,#3893);-#3892 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#3893 = VECTOR('',#3894,1.);-#3894 = DIRECTION('',(-1.,0.,0.));-#3895 = ORIENTED_EDGE('',*,*,#3896,.T.);-#3896 = EDGE_CURVE('',#3889,#3897,#3899,.T.);-#3897 = VERTEX_POINT('',#3898);-#3898 = CARTESIAN_POINT('',(2.2,-1.775,0.445));-#3899 = LINE('',#3900,#3901);-#3900 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#3901 = VECTOR('',#3902,1.);-#3902 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3903 = ORIENTED_EDGE('',*,*,#3904,.T.);-#3904 = EDGE_CURVE('',#3897,#3809,#3905,.T.);-#3905 = LINE('',#3906,#3907);-#3906 = CARTESIAN_POINT('',(2.2,-1.775,0.445));-#3907 = VECTOR('',#3908,1.);-#3908 = DIRECTION('',(-1.,0.,0.));-#3909 = ORIENTED_EDGE('',*,*,#3808,.T.);-#3910 = PLANE('',#3911);-#3911 = AXIS2_PLACEMENT_3D('',#3912,#3913,#3914);-#3912 = CARTESIAN_POINT('',(2.634182274245,-1.775,0.217942023204));-#3913 = DIRECTION('',(0.,1.,0.));-#3914 = DIRECTION('',(0.,-0.,1.));-#3915 = ADVANCED_FACE('',(#3916),#3934,.T.);-#3916 = FACE_BOUND('',#3917,.T.);-#3917 = EDGE_LOOP('',(#3918,#3919,#3920,#3928));-#3918 = ORIENTED_EDGE('',*,*,#3904,.T.);-#3919 = ORIENTED_EDGE('',*,*,#3825,.F.);-#3920 = ORIENTED_EDGE('',*,*,#3921,.F.);-#3921 = EDGE_CURVE('',#3922,#3818,#3924,.T.);-#3922 = VERTEX_POINT('',#3923);-#3923 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#3924 = LINE('',#3925,#3926);-#3925 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#3926 = VECTOR('',#3927,1.);+#3880 = EDGE_CURVE('',#3871,#3840,#3881,.T.);+#3881 = LINE('',#3882,#3883);+#3882 = CARTESIAN_POINT('',(2.4875,-1.775,0.));+#3883 = VECTOR('',#3884,1.);+#3884 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3885 = ORIENTED_EDGE('',*,*,#3856,.F.);+#3886 = ORIENTED_EDGE('',*,*,#3887,.F.);+#3887 = EDGE_CURVE('',#3873,#3849,#3888,.T.);+#3888 = LINE('',#3889,#3890);+#3889 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#3890 = VECTOR('',#3891,1.);+#3891 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3892 = PLANE('',#3893);+#3893 = AXIS2_PLACEMENT_3D('',#3894,#3895,#3896);+#3894 = CARTESIAN_POINT('',(2.4875,-1.625,0.));+#3895 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#3896 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#3897 = ADVANCED_FACE('',(#3898),#3923,.T.);+#3898 = FACE_BOUND('',#3899,.T.);+#3899 = EDGE_LOOP('',(#3900,#3910,#3916,#3917));+#3900 = ORIENTED_EDGE('',*,*,#3901,.F.);+#3901 = EDGE_CURVE('',#3902,#3904,#3906,.T.);+#3902 = VERTEX_POINT('',#3903);+#3903 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#3904 = VERTEX_POINT('',#3905);+#3905 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#3906 = LINE('',#3907,#3908);+#3907 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#3908 = VECTOR('',#3909,1.);+#3909 = DIRECTION('',(0.,1.,0.));+#3910 = ORIENTED_EDGE('',*,*,#3911,.T.);+#3911 = EDGE_CURVE('',#3902,#3871,#3912,.T.);+#3912 = LINE('',#3913,#3914);+#3913 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#3914 = VECTOR('',#3915,1.);+#3915 = DIRECTION('',(-1.,0.,0.));+#3916 = ORIENTED_EDGE('',*,*,#3870,.T.);+#3917 = ORIENTED_EDGE('',*,*,#3918,.F.);+#3918 = EDGE_CURVE('',#3904,#3873,#3919,.T.);+#3919 = LINE('',#3920,#3921);+#3920 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#3921 = VECTOR('',#3922,1.);+#3922 = DIRECTION('',(-1.,0.,0.));+#3923 = PLANE('',#3924);+#3924 = AXIS2_PLACEMENT_3D('',#3925,#3926,#3927);+#3925 = CARTESIAN_POINT('',(3.205,-1.625,0.));+#3926 = DIRECTION('',(-0.,-0.,-1.)); #3927 = DIRECTION('',(-1.,0.,0.));-#3928 = ORIENTED_EDGE('',*,*,#3929,.T.);-#3929 = EDGE_CURVE('',#3922,#3897,#3930,.T.);-#3930 = LINE('',#3931,#3932);-#3931 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#3932 = VECTOR('',#3933,1.);-#3933 = DIRECTION('',(0.,-1.,0.));-#3934 = PLANE('',#3935);-#3935 = AXIS2_PLACEMENT_3D('',#3936,#3937,#3938);-#3936 = CARTESIAN_POINT('',(2.2,-1.625,0.445));-#3937 = DIRECTION('',(-0.,-0.,-1.));-#3938 = DIRECTION('',(-1.,0.,0.));-#3939 = ADVANCED_FACE('',(#3940),#3958,.T.);-#3940 = FACE_BOUND('',#3941,.T.);-#3941 = EDGE_LOOP('',(#3942,#3943,#3944,#3952));-#3942 = ORIENTED_EDGE('',*,*,#3848,.F.);-#3943 = ORIENTED_EDGE('',*,*,#3872,.T.);-#3944 = ORIENTED_EDGE('',*,*,#3945,.T.);-#3945 = EDGE_CURVE('',#3873,#3946,#3948,.T.);-#3946 = VERTEX_POINT('',#3947);-#3947 = CARTESIAN_POINT('',(3.205,-1.475,0.15));-#3948 = LINE('',#3949,#3950);-#3949 = CARTESIAN_POINT('',(3.205,-1.775,0.15));-#3950 = VECTOR('',#3951,1.);-#3951 = DIRECTION('',(0.,1.,0.));-#3952 = ORIENTED_EDGE('',*,*,#3953,.F.);-#3953 = EDGE_CURVE('',#3849,#3946,#3954,.T.);-#3954 = LINE('',#3955,#3956);-#3955 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));-#3956 = VECTOR('',#3957,1.);+#3928 = ADVANCED_FACE('',(#3929),#3954,.T.);+#3929 = FACE_BOUND('',#3930,.T.);+#3930 = EDGE_LOOP('',(#3931,#3941,#3947,#3948));+#3931 = ORIENTED_EDGE('',*,*,#3932,.F.);+#3932 = EDGE_CURVE('',#3933,#3935,#3937,.T.);+#3933 = VERTEX_POINT('',#3934);+#3934 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#3935 = VERTEX_POINT('',#3936);+#3936 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#3937 = LINE('',#3938,#3939);+#3938 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#3939 = VECTOR('',#3940,1.);+#3940 = DIRECTION('',(0.,1.,0.));+#3941 = ORIENTED_EDGE('',*,*,#3942,.T.);+#3942 = EDGE_CURVE('',#3933,#3902,#3943,.T.);+#3943 = LINE('',#3944,#3945);+#3944 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#3945 = VECTOR('',#3946,1.);+#3946 = DIRECTION('',(0.,0.,-1.));+#3947 = ORIENTED_EDGE('',*,*,#3901,.T.);+#3948 = ORIENTED_EDGE('',*,*,#3949,.F.);+#3949 = EDGE_CURVE('',#3935,#3904,#3950,.T.);+#3950 = LINE('',#3951,#3952);+#3951 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#3952 = VECTOR('',#3953,1.);+#3953 = DIRECTION('',(0.,0.,-1.));+#3954 = PLANE('',#3955);+#3955 = AXIS2_PLACEMENT_3D('',#3956,#3957,#3958);+#3956 = CARTESIAN_POINT('',(3.205,-1.625,0.15)); #3957 = DIRECTION('',(1.,0.,0.));-#3958 = PLANE('',#3959);-#3959 = AXIS2_PLACEMENT_3D('',#3960,#3961,#3962);-#3960 = CARTESIAN_POINT('',(2.6375,-1.625,0.15));-#3961 = DIRECTION('',(-0.,0.,1.));-#3962 = DIRECTION('',(1.,0.,0.));-#3963 = ADVANCED_FACE('',(#3964),#3993,.T.);-#3964 = FACE_BOUND('',#3965,.T.);-#3965 = EDGE_LOOP('',(#3966,#3967,#3968,#3969,#3977,#3985,#3991,#3992));-#3966 = ORIENTED_EDGE('',*,*,#3786,.T.);-#3967 = ORIENTED_EDGE('',*,*,#3856,.T.);-#3968 = ORIENTED_EDGE('',*,*,#3953,.T.);-#3969 = ORIENTED_EDGE('',*,*,#3970,.T.);-#3970 = EDGE_CURVE('',#3946,#3971,#3973,.T.);-#3971 = VERTEX_POINT('',#3972);-#3972 = CARTESIAN_POINT('',(3.205,-1.475,0.));-#3973 = LINE('',#3974,#3975);-#3974 = CARTESIAN_POINT('',(3.205,-1.475,0.15));-#3975 = VECTOR('',#3976,1.);-#3976 = DIRECTION('',(0.,0.,-1.));-#3977 = ORIENTED_EDGE('',*,*,#3978,.T.);-#3978 = EDGE_CURVE('',#3971,#3979,#3981,.T.);-#3979 = VERTEX_POINT('',#3980);-#3980 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#3958 = DIRECTION('',(0.,0.,-1.));+#3959 = ADVANCED_FACE('',(#3960),#3985,.T.);+#3960 = FACE_BOUND('',#3961,.T.);+#3961 = EDGE_LOOP('',(#3962,#3972,#3978,#3979));+#3962 = ORIENTED_EDGE('',*,*,#3963,.F.);+#3963 = EDGE_CURVE('',#3964,#3966,#3968,.T.);+#3964 = VERTEX_POINT('',#3965);+#3965 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#3966 = VERTEX_POINT('',#3967);+#3967 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#3968 = LINE('',#3969,#3970);+#3969 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#3970 = VECTOR('',#3971,1.);+#3971 = DIRECTION('',(0.,1.,0.));+#3972 = ORIENTED_EDGE('',*,*,#3973,.T.);+#3973 = EDGE_CURVE('',#3964,#3933,#3974,.T.);+#3974 = LINE('',#3975,#3976);+#3975 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#3976 = VECTOR('',#3977,1.);+#3977 = DIRECTION('',(1.,0.,0.));+#3978 = ORIENTED_EDGE('',*,*,#3932,.T.);+#3979 = ORIENTED_EDGE('',*,*,#3980,.F.);+#3980 = EDGE_CURVE('',#3966,#3935,#3981,.T.); #3981 = LINE('',#3982,#3983);-#3982 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#3982 = CARTESIAN_POINT('',(2.6375,-1.475,0.15)); #3983 = VECTOR('',#3984,1.);-#3984 = DIRECTION('',(-1.,0.,0.));-#3985 = ORIENTED_EDGE('',*,*,#3986,.T.);-#3986 = EDGE_CURVE('',#3979,#3922,#3987,.T.);-#3987 = LINE('',#3988,#3989);-#3988 = CARTESIAN_POINT('',(2.4875,-1.475,0.));-#3989 = VECTOR('',#3990,1.);-#3990 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#3991 = ORIENTED_EDGE('',*,*,#3921,.T.);-#3992 = ORIENTED_EDGE('',*,*,#3817,.T.);-#3993 = PLANE('',#3994);-#3994 = AXIS2_PLACEMENT_3D('',#3995,#3996,#3997);-#3995 = CARTESIAN_POINT('',(2.634182274245,-1.475,0.217942023204));-#3996 = DIRECTION('',(0.,1.,0.));-#3997 = DIRECTION('',(0.,-0.,1.));-#3998 = ADVANCED_FACE('',(#3999),#4010,.T.);-#3999 = FACE_BOUND('',#4000,.T.);-#4000 = EDGE_LOOP('',(#4001,#4002,#4003,#4009));-#4001 = ORIENTED_EDGE('',*,*,#3945,.F.);-#4002 = ORIENTED_EDGE('',*,*,#3880,.T.);-#4003 = ORIENTED_EDGE('',*,*,#4004,.T.);-#4004 = EDGE_CURVE('',#3881,#3971,#4005,.T.);-#4005 = LINE('',#4006,#4007);-#4006 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#4007 = VECTOR('',#4008,1.);-#4008 = DIRECTION('',(0.,1.,0.));-#4009 = ORIENTED_EDGE('',*,*,#3970,.F.);-#4010 = PLANE('',#4011);-#4011 = AXIS2_PLACEMENT_3D('',#4012,#4013,#4014);-#4012 = CARTESIAN_POINT('',(3.205,-1.625,0.15));-#4013 = DIRECTION('',(1.,0.,0.));-#4014 = DIRECTION('',(0.,0.,-1.));-#4015 = ADVANCED_FACE('',(#4016),#4027,.T.);-#4016 = FACE_BOUND('',#4017,.T.);-#4017 = EDGE_LOOP('',(#4018,#4019,#4020,#4026));-#4018 = ORIENTED_EDGE('',*,*,#4004,.F.);-#4019 = ORIENTED_EDGE('',*,*,#3888,.T.);-#4020 = ORIENTED_EDGE('',*,*,#4021,.T.);-#4021 = EDGE_CURVE('',#3889,#3979,#4022,.T.);-#4022 = LINE('',#4023,#4024);-#4023 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#4024 = VECTOR('',#4025,1.);-#4025 = DIRECTION('',(0.,1.,0.));-#4026 = ORIENTED_EDGE('',*,*,#3978,.F.);-#4027 = PLANE('',#4028);-#4028 = AXIS2_PLACEMENT_3D('',#4029,#4030,#4031);-#4029 = CARTESIAN_POINT('',(3.205,-1.625,0.));-#4030 = DIRECTION('',(-0.,-0.,-1.));-#4031 = DIRECTION('',(-1.,0.,0.));-#4032 = ADVANCED_FACE('',(#4033),#4039,.T.);-#4033 = FACE_BOUND('',#4034,.T.);-#4034 = EDGE_LOOP('',(#4035,#4036,#4037,#4038));-#4035 = ORIENTED_EDGE('',*,*,#4021,.F.);-#4036 = ORIENTED_EDGE('',*,*,#3896,.T.);-#4037 = ORIENTED_EDGE('',*,*,#3929,.F.);-#4038 = ORIENTED_EDGE('',*,*,#3986,.F.);+#3984 = DIRECTION('',(1.,0.,0.));+#3985 = PLANE('',#3986);+#3986 = AXIS2_PLACEMENT_3D('',#3987,#3988,#3989);+#3987 = CARTESIAN_POINT('',(2.6375,-1.625,0.15));+#3988 = DIRECTION('',(-0.,0.,1.));+#3989 = DIRECTION('',(1.,0.,0.));+#3990 = ADVANCED_FACE('',(#3991),#4006,.T.);+#3991 = FACE_BOUND('',#3992,.T.);+#3992 = EDGE_LOOP('',(#3993,#3994,#4000,#4001,#4002,#4003,#4004,#4005));+#3993 = ORIENTED_EDGE('',*,*,#3786,.T.);+#3994 = ORIENTED_EDGE('',*,*,#3995,.T.);+#3995 = EDGE_CURVE('',#3779,#3966,#3996,.T.);+#3996 = LINE('',#3997,#3998);+#3997 = CARTESIAN_POINT('',(2.35,-1.475,0.595));+#3998 = VECTOR('',#3999,1.);+#3999 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4000 = ORIENTED_EDGE('',*,*,#3980,.T.);+#4001 = ORIENTED_EDGE('',*,*,#3949,.T.);+#4002 = ORIENTED_EDGE('',*,*,#3918,.T.);+#4003 = ORIENTED_EDGE('',*,*,#3887,.T.);+#4004 = ORIENTED_EDGE('',*,*,#3848,.T.);+#4005 = ORIENTED_EDGE('',*,*,#3817,.T.);+#4006 = PLANE('',#4007);+#4007 = AXIS2_PLACEMENT_3D('',#4008,#4009,#4010);+#4008 = CARTESIAN_POINT('',(2.634182274245,-1.475,0.217942023204));+#4009 = DIRECTION('',(0.,1.,0.));+#4010 = DIRECTION('',(0.,-0.,1.));+#4011 = ADVANCED_FACE('',(#4012),#4023,.T.);+#4012 = FACE_BOUND('',#4013,.T.);+#4013 = EDGE_LOOP('',(#4014,#4015,#4021,#4022));+#4014 = ORIENTED_EDGE('',*,*,#3778,.F.);+#4015 = ORIENTED_EDGE('',*,*,#4016,.T.);+#4016 = EDGE_CURVE('',#3771,#3964,#4017,.T.);+#4017 = LINE('',#4018,#4019);+#4018 = CARTESIAN_POINT('',(2.35,-1.775,0.595));+#4019 = VECTOR('',#4020,1.);+#4020 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4021 = ORIENTED_EDGE('',*,*,#3963,.T.);+#4022 = ORIENTED_EDGE('',*,*,#3995,.F.);+#4023 = PLANE('',#4024);+#4024 = AXIS2_PLACEMENT_3D('',#4025,#4026,#4027);+#4025 = CARTESIAN_POINT('',(2.35,-1.625,0.595));+#4026 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#4027 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4028 = ADVANCED_FACE('',(#4029),#4039,.F.);+#4029 = FACE_BOUND('',#4030,.F.);+#4030 = EDGE_LOOP('',(#4031,#4032,#4033,#4034,#4035,#4036,#4037,#4038));+#4031 = ORIENTED_EDGE('',*,*,#3768,.T.);+#4032 = ORIENTED_EDGE('',*,*,#4016,.T.);+#4033 = ORIENTED_EDGE('',*,*,#3973,.T.);+#4034 = ORIENTED_EDGE('',*,*,#3942,.T.);+#4035 = ORIENTED_EDGE('',*,*,#3911,.T.);+#4036 = ORIENTED_EDGE('',*,*,#3880,.T.);+#4037 = ORIENTED_EDGE('',*,*,#3839,.T.);+#4038 = ORIENTED_EDGE('',*,*,#3808,.T.); #4039 = PLANE('',#4040); #4040 = AXIS2_PLACEMENT_3D('',#4041,#4042,#4043);-#4041 = CARTESIAN_POINT('',(2.4875,-1.625,0.));-#4042 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#4043 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4041 = CARTESIAN_POINT('',(2.634182274245,-1.775,0.217942023204));+#4042 = DIRECTION('',(0.,1.,0.));+#4043 = DIRECTION('',(0.,-0.,1.)); #4044 = MANIFOLD_SOLID_BREP('',#4045);-#4045 = CLOSED_SHELL('',(#4046,#4086,#4117,#4148,#4197,#4221,#4245,#4280- ,#4297,#4314));+#4045 = CLOSED_SHELL('',(#4046,#4086,#4117,#4148,#4179,#4210,#4241,#4272+ ,#4293,#4310)); #4046 = ADVANCED_FACE('',(#4047),#4081,.T.); #4047 = FACE_BOUND('',#4048,.T.); #4048 = EDGE_LOOP('',(#4049,#4059,#4067,#4075));@@ -4164,216 +4164,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #4116 = DIRECTION('',(0.,0.,1.)); #4117 = ADVANCED_FACE('',(#4118),#4143,.T.); #4118 = FACE_BOUND('',#4119,.T.);-#4119 = EDGE_LOOP('',(#4120,#4121,#4129,#4137));-#4120 = ORIENTED_EDGE('',*,*,#4060,.F.);-#4121 = ORIENTED_EDGE('',*,*,#4122,.T.);-#4122 = EDGE_CURVE('',#4053,#4123,#4125,.T.);-#4123 = VERTEX_POINT('',#4124);-#4124 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));-#4125 = LINE('',#4126,#4127);-#4126 = CARTESIAN_POINT('',(2.35,-1.125,0.595));-#4127 = VECTOR('',#4128,1.);-#4128 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4129 = ORIENTED_EDGE('',*,*,#4130,.T.);-#4130 = EDGE_CURVE('',#4123,#4131,#4133,.T.);+#4119 = EDGE_LOOP('',(#4120,#4128,#4129,#4137));+#4120 = ORIENTED_EDGE('',*,*,#4121,.T.);+#4121 = EDGE_CURVE('',#4122,#4091,#4124,.T.);+#4122 = VERTEX_POINT('',#4123);+#4123 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#4124 = LINE('',#4125,#4126);+#4125 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#4126 = VECTOR('',#4127,1.);+#4127 = DIRECTION('',(-1.,0.,0.));+#4128 = ORIENTED_EDGE('',*,*,#4107,.F.);+#4129 = ORIENTED_EDGE('',*,*,#4130,.F.);+#4130 = EDGE_CURVE('',#4131,#4100,#4133,.T.); #4131 = VERTEX_POINT('',#4132);-#4132 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#4132 = CARTESIAN_POINT('',(2.2,-0.825,0.445)); #4133 = LINE('',#4134,#4135);-#4134 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#4134 = CARTESIAN_POINT('',(2.2,-0.825,0.445)); #4135 = VECTOR('',#4136,1.);-#4136 = DIRECTION('',(0.,1.,0.));-#4137 = ORIENTED_EDGE('',*,*,#4138,.F.);-#4138 = EDGE_CURVE('',#4061,#4131,#4139,.T.);+#4136 = DIRECTION('',(-1.,0.,0.));+#4137 = ORIENTED_EDGE('',*,*,#4138,.T.);+#4138 = EDGE_CURVE('',#4131,#4122,#4139,.T.); #4139 = LINE('',#4140,#4141);-#4140 = CARTESIAN_POINT('',(2.35,-0.825,0.595));+#4140 = CARTESIAN_POINT('',(2.2,-0.825,0.445)); #4141 = VECTOR('',#4142,1.);-#4142 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4142 = DIRECTION('',(0.,-1.,0.)); #4143 = PLANE('',#4144); #4144 = AXIS2_PLACEMENT_3D('',#4145,#4146,#4147);-#4145 = CARTESIAN_POINT('',(2.35,-0.975,0.595));-#4146 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#4147 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4148 = ADVANCED_FACE('',(#4149),#4192,.F.);-#4149 = FACE_BOUND('',#4150,.F.);-#4150 = EDGE_LOOP('',(#4151,#4152,#4153,#4161,#4169,#4177,#4185,#4191));-#4151 = ORIENTED_EDGE('',*,*,#4050,.T.);-#4152 = ORIENTED_EDGE('',*,*,#4122,.T.);-#4153 = ORIENTED_EDGE('',*,*,#4154,.T.);-#4154 = EDGE_CURVE('',#4123,#4155,#4157,.T.);+#4145 = CARTESIAN_POINT('',(2.2,-0.975,0.445));+#4146 = DIRECTION('',(-0.,-0.,-1.));+#4147 = DIRECTION('',(-1.,0.,0.));+#4148 = ADVANCED_FACE('',(#4149),#4174,.T.);+#4149 = FACE_BOUND('',#4150,.T.);+#4150 = EDGE_LOOP('',(#4151,#4161,#4167,#4168));+#4151 = ORIENTED_EDGE('',*,*,#4152,.F.);+#4152 = EDGE_CURVE('',#4153,#4155,#4157,.T.);+#4153 = VERTEX_POINT('',#4154);+#4154 = CARTESIAN_POINT('',(2.4875,-1.125,0.)); #4155 = VERTEX_POINT('',#4156);-#4156 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#4156 = CARTESIAN_POINT('',(2.4875,-0.825,0.)); #4157 = LINE('',#4158,#4159);-#4158 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#4158 = CARTESIAN_POINT('',(2.4875,-1.125,0.)); #4159 = VECTOR('',#4160,1.);-#4160 = DIRECTION('',(1.,0.,0.));+#4160 = DIRECTION('',(0.,1.,0.)); #4161 = ORIENTED_EDGE('',*,*,#4162,.T.);-#4162 = EDGE_CURVE('',#4155,#4163,#4165,.T.);-#4163 = VERTEX_POINT('',#4164);-#4164 = CARTESIAN_POINT('',(3.205,-1.125,0.));-#4165 = LINE('',#4166,#4167);-#4166 = CARTESIAN_POINT('',(3.205,-1.125,0.15));-#4167 = VECTOR('',#4168,1.);-#4168 = DIRECTION('',(0.,0.,-1.));-#4169 = ORIENTED_EDGE('',*,*,#4170,.T.);-#4170 = EDGE_CURVE('',#4163,#4171,#4173,.T.);-#4171 = VERTEX_POINT('',#4172);-#4172 = CARTESIAN_POINT('',(2.4875,-1.125,0.));-#4173 = LINE('',#4174,#4175);-#4174 = CARTESIAN_POINT('',(3.205,-1.125,0.));-#4175 = VECTOR('',#4176,1.);-#4176 = DIRECTION('',(-1.,0.,0.));-#4177 = ORIENTED_EDGE('',*,*,#4178,.T.);-#4178 = EDGE_CURVE('',#4171,#4179,#4181,.T.);-#4179 = VERTEX_POINT('',#4180);-#4180 = CARTESIAN_POINT('',(2.2,-1.125,0.445));-#4181 = LINE('',#4182,#4183);-#4182 = CARTESIAN_POINT('',(2.4875,-1.125,0.));-#4183 = VECTOR('',#4184,1.);-#4184 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4185 = ORIENTED_EDGE('',*,*,#4186,.T.);-#4186 = EDGE_CURVE('',#4179,#4091,#4187,.T.);-#4187 = LINE('',#4188,#4189);-#4188 = CARTESIAN_POINT('',(2.2,-1.125,0.445));-#4189 = VECTOR('',#4190,1.);-#4190 = DIRECTION('',(-1.,0.,0.));-#4191 = ORIENTED_EDGE('',*,*,#4090,.T.);-#4192 = PLANE('',#4193);-#4193 = AXIS2_PLACEMENT_3D('',#4194,#4195,#4196);-#4194 = CARTESIAN_POINT('',(2.634182274245,-1.125,0.217942023204));-#4195 = DIRECTION('',(0.,1.,0.));-#4196 = DIRECTION('',(0.,-0.,1.));-#4197 = ADVANCED_FACE('',(#4198),#4216,.T.);-#4198 = FACE_BOUND('',#4199,.T.);-#4199 = EDGE_LOOP('',(#4200,#4201,#4202,#4210));-#4200 = ORIENTED_EDGE('',*,*,#4186,.T.);-#4201 = ORIENTED_EDGE('',*,*,#4107,.F.);-#4202 = ORIENTED_EDGE('',*,*,#4203,.F.);-#4203 = EDGE_CURVE('',#4204,#4100,#4206,.T.);-#4204 = VERTEX_POINT('',#4205);-#4205 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#4206 = LINE('',#4207,#4208);-#4207 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#4208 = VECTOR('',#4209,1.);+#4162 = EDGE_CURVE('',#4153,#4122,#4163,.T.);+#4163 = LINE('',#4164,#4165);+#4164 = CARTESIAN_POINT('',(2.4875,-1.125,0.));+#4165 = VECTOR('',#4166,1.);+#4166 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4167 = ORIENTED_EDGE('',*,*,#4138,.F.);+#4168 = ORIENTED_EDGE('',*,*,#4169,.F.);+#4169 = EDGE_CURVE('',#4155,#4131,#4170,.T.);+#4170 = LINE('',#4171,#4172);+#4171 = CARTESIAN_POINT('',(2.4875,-0.825,0.));+#4172 = VECTOR('',#4173,1.);+#4173 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4174 = PLANE('',#4175);+#4175 = AXIS2_PLACEMENT_3D('',#4176,#4177,#4178);+#4176 = CARTESIAN_POINT('',(2.4875,-0.975,0.));+#4177 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#4178 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4179 = ADVANCED_FACE('',(#4180),#4205,.T.);+#4180 = FACE_BOUND('',#4181,.T.);+#4181 = EDGE_LOOP('',(#4182,#4192,#4198,#4199));+#4182 = ORIENTED_EDGE('',*,*,#4183,.F.);+#4183 = EDGE_CURVE('',#4184,#4186,#4188,.T.);+#4184 = VERTEX_POINT('',#4185);+#4185 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#4186 = VERTEX_POINT('',#4187);+#4187 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#4188 = LINE('',#4189,#4190);+#4189 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#4190 = VECTOR('',#4191,1.);+#4191 = DIRECTION('',(0.,1.,0.));+#4192 = ORIENTED_EDGE('',*,*,#4193,.T.);+#4193 = EDGE_CURVE('',#4184,#4153,#4194,.T.);+#4194 = LINE('',#4195,#4196);+#4195 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#4196 = VECTOR('',#4197,1.);+#4197 = DIRECTION('',(-1.,0.,0.));+#4198 = ORIENTED_EDGE('',*,*,#4152,.T.);+#4199 = ORIENTED_EDGE('',*,*,#4200,.F.);+#4200 = EDGE_CURVE('',#4186,#4155,#4201,.T.);+#4201 = LINE('',#4202,#4203);+#4202 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#4203 = VECTOR('',#4204,1.);+#4204 = DIRECTION('',(-1.,0.,0.));+#4205 = PLANE('',#4206);+#4206 = AXIS2_PLACEMENT_3D('',#4207,#4208,#4209);+#4207 = CARTESIAN_POINT('',(3.205,-0.975,0.));+#4208 = DIRECTION('',(-0.,-0.,-1.)); #4209 = DIRECTION('',(-1.,0.,0.));-#4210 = ORIENTED_EDGE('',*,*,#4211,.T.);-#4211 = EDGE_CURVE('',#4204,#4179,#4212,.T.);-#4212 = LINE('',#4213,#4214);-#4213 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#4214 = VECTOR('',#4215,1.);-#4215 = DIRECTION('',(0.,-1.,0.));-#4216 = PLANE('',#4217);-#4217 = AXIS2_PLACEMENT_3D('',#4218,#4219,#4220);-#4218 = CARTESIAN_POINT('',(2.2,-0.975,0.445));-#4219 = DIRECTION('',(-0.,-0.,-1.));-#4220 = DIRECTION('',(-1.,0.,0.));-#4221 = ADVANCED_FACE('',(#4222),#4240,.T.);-#4222 = FACE_BOUND('',#4223,.T.);-#4223 = EDGE_LOOP('',(#4224,#4225,#4226,#4234));-#4224 = ORIENTED_EDGE('',*,*,#4130,.F.);-#4225 = ORIENTED_EDGE('',*,*,#4154,.T.);-#4226 = ORIENTED_EDGE('',*,*,#4227,.T.);-#4227 = EDGE_CURVE('',#4155,#4228,#4230,.T.);-#4228 = VERTEX_POINT('',#4229);-#4229 = CARTESIAN_POINT('',(3.205,-0.825,0.15));-#4230 = LINE('',#4231,#4232);-#4231 = CARTESIAN_POINT('',(3.205,-1.125,0.15));-#4232 = VECTOR('',#4233,1.);-#4233 = DIRECTION('',(0.,1.,0.));-#4234 = ORIENTED_EDGE('',*,*,#4235,.F.);-#4235 = EDGE_CURVE('',#4131,#4228,#4236,.T.);-#4236 = LINE('',#4237,#4238);-#4237 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));-#4238 = VECTOR('',#4239,1.);+#4210 = ADVANCED_FACE('',(#4211),#4236,.T.);+#4211 = FACE_BOUND('',#4212,.T.);+#4212 = EDGE_LOOP('',(#4213,#4223,#4229,#4230));+#4213 = ORIENTED_EDGE('',*,*,#4214,.F.);+#4214 = EDGE_CURVE('',#4215,#4217,#4219,.T.);+#4215 = VERTEX_POINT('',#4216);+#4216 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#4217 = VERTEX_POINT('',#4218);+#4218 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#4219 = LINE('',#4220,#4221);+#4220 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#4221 = VECTOR('',#4222,1.);+#4222 = DIRECTION('',(0.,1.,0.));+#4223 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4224 = EDGE_CURVE('',#4215,#4184,#4225,.T.);+#4225 = LINE('',#4226,#4227);+#4226 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#4227 = VECTOR('',#4228,1.);+#4228 = DIRECTION('',(0.,0.,-1.));+#4229 = ORIENTED_EDGE('',*,*,#4183,.T.);+#4230 = ORIENTED_EDGE('',*,*,#4231,.F.);+#4231 = EDGE_CURVE('',#4217,#4186,#4232,.T.);+#4232 = LINE('',#4233,#4234);+#4233 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#4234 = VECTOR('',#4235,1.);+#4235 = DIRECTION('',(0.,0.,-1.));+#4236 = PLANE('',#4237);+#4237 = AXIS2_PLACEMENT_3D('',#4238,#4239,#4240);+#4238 = CARTESIAN_POINT('',(3.205,-0.975,0.15)); #4239 = DIRECTION('',(1.,0.,0.));-#4240 = PLANE('',#4241);-#4241 = AXIS2_PLACEMENT_3D('',#4242,#4243,#4244);-#4242 = CARTESIAN_POINT('',(2.6375,-0.975,0.15));-#4243 = DIRECTION('',(-0.,0.,1.));-#4244 = DIRECTION('',(1.,0.,0.));-#4245 = ADVANCED_FACE('',(#4246),#4275,.T.);-#4246 = FACE_BOUND('',#4247,.T.);-#4247 = EDGE_LOOP('',(#4248,#4249,#4250,#4251,#4259,#4267,#4273,#4274));-#4248 = ORIENTED_EDGE('',*,*,#4068,.T.);-#4249 = ORIENTED_EDGE('',*,*,#4138,.T.);-#4250 = ORIENTED_EDGE('',*,*,#4235,.T.);-#4251 = ORIENTED_EDGE('',*,*,#4252,.T.);-#4252 = EDGE_CURVE('',#4228,#4253,#4255,.T.);-#4253 = VERTEX_POINT('',#4254);-#4254 = CARTESIAN_POINT('',(3.205,-0.825,0.));-#4255 = LINE('',#4256,#4257);-#4256 = CARTESIAN_POINT('',(3.205,-0.825,0.15));-#4257 = VECTOR('',#4258,1.);-#4258 = DIRECTION('',(0.,0.,-1.));-#4259 = ORIENTED_EDGE('',*,*,#4260,.T.);-#4260 = EDGE_CURVE('',#4253,#4261,#4263,.T.);-#4261 = VERTEX_POINT('',#4262);-#4262 = CARTESIAN_POINT('',(2.4875,-0.825,0.));+#4240 = DIRECTION('',(0.,0.,-1.));+#4241 = ADVANCED_FACE('',(#4242),#4267,.T.);+#4242 = FACE_BOUND('',#4243,.T.);+#4243 = EDGE_LOOP('',(#4244,#4254,#4260,#4261));+#4244 = ORIENTED_EDGE('',*,*,#4245,.F.);+#4245 = EDGE_CURVE('',#4246,#4248,#4250,.T.);+#4246 = VERTEX_POINT('',#4247);+#4247 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#4248 = VERTEX_POINT('',#4249);+#4249 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#4250 = LINE('',#4251,#4252);+#4251 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#4252 = VECTOR('',#4253,1.);+#4253 = DIRECTION('',(0.,1.,0.));+#4254 = ORIENTED_EDGE('',*,*,#4255,.T.);+#4255 = EDGE_CURVE('',#4246,#4215,#4256,.T.);+#4256 = LINE('',#4257,#4258);+#4257 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#4258 = VECTOR('',#4259,1.);+#4259 = DIRECTION('',(1.,0.,0.));+#4260 = ORIENTED_EDGE('',*,*,#4214,.T.);+#4261 = ORIENTED_EDGE('',*,*,#4262,.F.);+#4262 = EDGE_CURVE('',#4248,#4217,#4263,.T.); #4263 = LINE('',#4264,#4265);-#4264 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#4264 = CARTESIAN_POINT('',(2.6375,-0.825,0.15)); #4265 = VECTOR('',#4266,1.);-#4266 = DIRECTION('',(-1.,0.,0.));-#4267 = ORIENTED_EDGE('',*,*,#4268,.T.);-#4268 = EDGE_CURVE('',#4261,#4204,#4269,.T.);-#4269 = LINE('',#4270,#4271);-#4270 = CARTESIAN_POINT('',(2.4875,-0.825,0.));-#4271 = VECTOR('',#4272,1.);-#4272 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4273 = ORIENTED_EDGE('',*,*,#4203,.T.);-#4274 = ORIENTED_EDGE('',*,*,#4099,.T.);-#4275 = PLANE('',#4276);-#4276 = AXIS2_PLACEMENT_3D('',#4277,#4278,#4279);-#4277 = CARTESIAN_POINT('',(2.634182274245,-0.825,0.217942023204));-#4278 = DIRECTION('',(0.,1.,0.));-#4279 = DIRECTION('',(0.,-0.,1.));-#4280 = ADVANCED_FACE('',(#4281),#4292,.T.);-#4281 = FACE_BOUND('',#4282,.T.);-#4282 = EDGE_LOOP('',(#4283,#4284,#4285,#4291));-#4283 = ORIENTED_EDGE('',*,*,#4227,.F.);-#4284 = ORIENTED_EDGE('',*,*,#4162,.T.);-#4285 = ORIENTED_EDGE('',*,*,#4286,.T.);-#4286 = EDGE_CURVE('',#4163,#4253,#4287,.T.);-#4287 = LINE('',#4288,#4289);-#4288 = CARTESIAN_POINT('',(3.205,-1.125,0.));-#4289 = VECTOR('',#4290,1.);-#4290 = DIRECTION('',(0.,1.,0.));-#4291 = ORIENTED_EDGE('',*,*,#4252,.F.);-#4292 = PLANE('',#4293);-#4293 = AXIS2_PLACEMENT_3D('',#4294,#4295,#4296);-#4294 = CARTESIAN_POINT('',(3.205,-0.975,0.15));-#4295 = DIRECTION('',(1.,0.,0.));-#4296 = DIRECTION('',(0.,0.,-1.));-#4297 = ADVANCED_FACE('',(#4298),#4309,.T.);-#4298 = FACE_BOUND('',#4299,.T.);-#4299 = EDGE_LOOP('',(#4300,#4301,#4302,#4308));-#4300 = ORIENTED_EDGE('',*,*,#4286,.F.);-#4301 = ORIENTED_EDGE('',*,*,#4170,.T.);-#4302 = ORIENTED_EDGE('',*,*,#4303,.T.);-#4303 = EDGE_CURVE('',#4171,#4261,#4304,.T.);-#4304 = LINE('',#4305,#4306);-#4305 = CARTESIAN_POINT('',(2.4875,-1.125,0.));-#4306 = VECTOR('',#4307,1.);-#4307 = DIRECTION('',(0.,1.,0.));-#4308 = ORIENTED_EDGE('',*,*,#4260,.F.);-#4309 = PLANE('',#4310);-#4310 = AXIS2_PLACEMENT_3D('',#4311,#4312,#4313);-#4311 = CARTESIAN_POINT('',(3.205,-0.975,0.));-#4312 = DIRECTION('',(-0.,-0.,-1.));-#4313 = DIRECTION('',(-1.,0.,0.));-#4314 = ADVANCED_FACE('',(#4315),#4321,.T.);-#4315 = FACE_BOUND('',#4316,.T.);-#4316 = EDGE_LOOP('',(#4317,#4318,#4319,#4320));-#4317 = ORIENTED_EDGE('',*,*,#4303,.F.);-#4318 = ORIENTED_EDGE('',*,*,#4178,.T.);-#4319 = ORIENTED_EDGE('',*,*,#4211,.F.);-#4320 = ORIENTED_EDGE('',*,*,#4268,.F.);+#4266 = DIRECTION('',(1.,0.,0.));+#4267 = PLANE('',#4268);+#4268 = AXIS2_PLACEMENT_3D('',#4269,#4270,#4271);+#4269 = CARTESIAN_POINT('',(2.6375,-0.975,0.15));+#4270 = DIRECTION('',(-0.,0.,1.));+#4271 = DIRECTION('',(1.,0.,0.));+#4272 = ADVANCED_FACE('',(#4273),#4288,.T.);+#4273 = FACE_BOUND('',#4274,.T.);+#4274 = EDGE_LOOP('',(#4275,#4276,#4282,#4283,#4284,#4285,#4286,#4287));+#4275 = ORIENTED_EDGE('',*,*,#4068,.T.);+#4276 = ORIENTED_EDGE('',*,*,#4277,.T.);+#4277 = EDGE_CURVE('',#4061,#4248,#4278,.T.);+#4278 = LINE('',#4279,#4280);+#4279 = CARTESIAN_POINT('',(2.35,-0.825,0.595));+#4280 = VECTOR('',#4281,1.);+#4281 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4282 = ORIENTED_EDGE('',*,*,#4262,.T.);+#4283 = ORIENTED_EDGE('',*,*,#4231,.T.);+#4284 = ORIENTED_EDGE('',*,*,#4200,.T.);+#4285 = ORIENTED_EDGE('',*,*,#4169,.T.);+#4286 = ORIENTED_EDGE('',*,*,#4130,.T.);+#4287 = ORIENTED_EDGE('',*,*,#4099,.T.);+#4288 = PLANE('',#4289);+#4289 = AXIS2_PLACEMENT_3D('',#4290,#4291,#4292);+#4290 = CARTESIAN_POINT('',(2.634182274245,-0.825,0.217942023204));+#4291 = DIRECTION('',(0.,1.,0.));+#4292 = DIRECTION('',(0.,-0.,1.));+#4293 = ADVANCED_FACE('',(#4294),#4305,.T.);+#4294 = FACE_BOUND('',#4295,.T.);+#4295 = EDGE_LOOP('',(#4296,#4297,#4303,#4304));+#4296 = ORIENTED_EDGE('',*,*,#4060,.F.);+#4297 = ORIENTED_EDGE('',*,*,#4298,.T.);+#4298 = EDGE_CURVE('',#4053,#4246,#4299,.T.);+#4299 = LINE('',#4300,#4301);+#4300 = CARTESIAN_POINT('',(2.35,-1.125,0.595));+#4301 = VECTOR('',#4302,1.);+#4302 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4303 = ORIENTED_EDGE('',*,*,#4245,.T.);+#4304 = ORIENTED_EDGE('',*,*,#4277,.F.);+#4305 = PLANE('',#4306);+#4306 = AXIS2_PLACEMENT_3D('',#4307,#4308,#4309);+#4307 = CARTESIAN_POINT('',(2.35,-0.975,0.595));+#4308 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#4309 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4310 = ADVANCED_FACE('',(#4311),#4321,.F.);+#4311 = FACE_BOUND('',#4312,.F.);+#4312 = EDGE_LOOP('',(#4313,#4314,#4315,#4316,#4317,#4318,#4319,#4320));+#4313 = ORIENTED_EDGE('',*,*,#4050,.T.);+#4314 = ORIENTED_EDGE('',*,*,#4298,.T.);+#4315 = ORIENTED_EDGE('',*,*,#4255,.T.);+#4316 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4317 = ORIENTED_EDGE('',*,*,#4193,.T.);+#4318 = ORIENTED_EDGE('',*,*,#4162,.T.);+#4319 = ORIENTED_EDGE('',*,*,#4121,.T.);+#4320 = ORIENTED_EDGE('',*,*,#4090,.T.); #4321 = PLANE('',#4322); #4322 = AXIS2_PLACEMENT_3D('',#4323,#4324,#4325);-#4323 = CARTESIAN_POINT('',(2.4875,-0.975,0.));-#4324 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#4325 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4323 = CARTESIAN_POINT('',(2.634182274245,-1.125,0.217942023204));+#4324 = DIRECTION('',(0.,1.,0.));+#4325 = DIRECTION('',(0.,-0.,1.)); #4326 = MANIFOLD_SOLID_BREP('',#4327);-#4327 = CLOSED_SHELL('',(#4328,#4368,#4399,#4430,#4479,#4503,#4527,#4562- ,#4579,#4596));+#4327 = CLOSED_SHELL('',(#4328,#4368,#4399,#4430,#4461,#4492,#4523,#4554+ ,#4575,#4592)); #4328 = ADVANCED_FACE('',(#4329),#4363,.T.); #4329 = FACE_BOUND('',#4330,.T.); #4330 = EDGE_LOOP('',(#4331,#4341,#4349,#4357));@@ -4447,216 +4447,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #4398 = DIRECTION('',(0.,0.,1.)); #4399 = ADVANCED_FACE('',(#4400),#4425,.T.); #4400 = FACE_BOUND('',#4401,.T.);-#4401 = EDGE_LOOP('',(#4402,#4403,#4411,#4419));-#4402 = ORIENTED_EDGE('',*,*,#4342,.F.);-#4403 = ORIENTED_EDGE('',*,*,#4404,.T.);-#4404 = EDGE_CURVE('',#4335,#4405,#4407,.T.);-#4405 = VERTEX_POINT('',#4406);-#4406 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));-#4407 = LINE('',#4408,#4409);-#4408 = CARTESIAN_POINT('',(2.35,-0.475,0.595));-#4409 = VECTOR('',#4410,1.);-#4410 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4411 = ORIENTED_EDGE('',*,*,#4412,.T.);-#4412 = EDGE_CURVE('',#4405,#4413,#4415,.T.);+#4401 = EDGE_LOOP('',(#4402,#4410,#4411,#4419));+#4402 = ORIENTED_EDGE('',*,*,#4403,.T.);+#4403 = EDGE_CURVE('',#4404,#4373,#4406,.T.);+#4404 = VERTEX_POINT('',#4405);+#4405 = CARTESIAN_POINT('',(2.2,-0.475,0.445));+#4406 = LINE('',#4407,#4408);+#4407 = CARTESIAN_POINT('',(2.2,-0.475,0.445));+#4408 = VECTOR('',#4409,1.);+#4409 = DIRECTION('',(-1.,0.,0.));+#4410 = ORIENTED_EDGE('',*,*,#4389,.F.);+#4411 = ORIENTED_EDGE('',*,*,#4412,.F.);+#4412 = EDGE_CURVE('',#4413,#4382,#4415,.T.); #4413 = VERTEX_POINT('',#4414);-#4414 = CARTESIAN_POINT('',(2.6375,-0.175,0.15));+#4414 = CARTESIAN_POINT('',(2.2,-0.175,0.445)); #4415 = LINE('',#4416,#4417);-#4416 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#4416 = CARTESIAN_POINT('',(2.2,-0.175,0.445)); #4417 = VECTOR('',#4418,1.);-#4418 = DIRECTION('',(0.,1.,0.));-#4419 = ORIENTED_EDGE('',*,*,#4420,.F.);-#4420 = EDGE_CURVE('',#4343,#4413,#4421,.T.);+#4418 = DIRECTION('',(-1.,0.,0.));+#4419 = ORIENTED_EDGE('',*,*,#4420,.T.);+#4420 = EDGE_CURVE('',#4413,#4404,#4421,.T.); #4421 = LINE('',#4422,#4423);-#4422 = CARTESIAN_POINT('',(2.35,-0.175,0.595));+#4422 = CARTESIAN_POINT('',(2.2,-0.175,0.445)); #4423 = VECTOR('',#4424,1.);-#4424 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4424 = DIRECTION('',(0.,-1.,0.)); #4425 = PLANE('',#4426); #4426 = AXIS2_PLACEMENT_3D('',#4427,#4428,#4429);-#4427 = CARTESIAN_POINT('',(2.35,-0.325,0.595));-#4428 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#4429 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4430 = ADVANCED_FACE('',(#4431),#4474,.F.);-#4431 = FACE_BOUND('',#4432,.F.);-#4432 = EDGE_LOOP('',(#4433,#4434,#4435,#4443,#4451,#4459,#4467,#4473));-#4433 = ORIENTED_EDGE('',*,*,#4332,.T.);-#4434 = ORIENTED_EDGE('',*,*,#4404,.T.);-#4435 = ORIENTED_EDGE('',*,*,#4436,.T.);-#4436 = EDGE_CURVE('',#4405,#4437,#4439,.T.);+#4427 = CARTESIAN_POINT('',(2.2,-0.325,0.445));+#4428 = DIRECTION('',(-0.,-0.,-1.));+#4429 = DIRECTION('',(-1.,0.,0.));+#4430 = ADVANCED_FACE('',(#4431),#4456,.T.);+#4431 = FACE_BOUND('',#4432,.T.);+#4432 = EDGE_LOOP('',(#4433,#4443,#4449,#4450));+#4433 = ORIENTED_EDGE('',*,*,#4434,.F.);+#4434 = EDGE_CURVE('',#4435,#4437,#4439,.T.);+#4435 = VERTEX_POINT('',#4436);+#4436 = CARTESIAN_POINT('',(2.4875,-0.475,0.)); #4437 = VERTEX_POINT('',#4438);-#4438 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#4438 = CARTESIAN_POINT('',(2.4875,-0.175,0.)); #4439 = LINE('',#4440,#4441);-#4440 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#4440 = CARTESIAN_POINT('',(2.4875,-0.475,0.)); #4441 = VECTOR('',#4442,1.);-#4442 = DIRECTION('',(1.,0.,0.));+#4442 = DIRECTION('',(0.,1.,0.)); #4443 = ORIENTED_EDGE('',*,*,#4444,.T.);-#4444 = EDGE_CURVE('',#4437,#4445,#4447,.T.);-#4445 = VERTEX_POINT('',#4446);-#4446 = CARTESIAN_POINT('',(3.205,-0.475,0.));-#4447 = LINE('',#4448,#4449);-#4448 = CARTESIAN_POINT('',(3.205,-0.475,0.15));-#4449 = VECTOR('',#4450,1.);-#4450 = DIRECTION('',(0.,0.,-1.));-#4451 = ORIENTED_EDGE('',*,*,#4452,.T.);-#4452 = EDGE_CURVE('',#4445,#4453,#4455,.T.);-#4453 = VERTEX_POINT('',#4454);-#4454 = CARTESIAN_POINT('',(2.4875,-0.475,0.));-#4455 = LINE('',#4456,#4457);-#4456 = CARTESIAN_POINT('',(3.205,-0.475,0.));-#4457 = VECTOR('',#4458,1.);-#4458 = DIRECTION('',(-1.,0.,0.));-#4459 = ORIENTED_EDGE('',*,*,#4460,.T.);-#4460 = EDGE_CURVE('',#4453,#4461,#4463,.T.);-#4461 = VERTEX_POINT('',#4462);-#4462 = CARTESIAN_POINT('',(2.2,-0.475,0.445));-#4463 = LINE('',#4464,#4465);-#4464 = CARTESIAN_POINT('',(2.4875,-0.475,0.));-#4465 = VECTOR('',#4466,1.);-#4466 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4467 = ORIENTED_EDGE('',*,*,#4468,.T.);-#4468 = EDGE_CURVE('',#4461,#4373,#4469,.T.);-#4469 = LINE('',#4470,#4471);-#4470 = CARTESIAN_POINT('',(2.2,-0.475,0.445));-#4471 = VECTOR('',#4472,1.);-#4472 = DIRECTION('',(-1.,0.,0.));-#4473 = ORIENTED_EDGE('',*,*,#4372,.T.);-#4474 = PLANE('',#4475);-#4475 = AXIS2_PLACEMENT_3D('',#4476,#4477,#4478);-#4476 = CARTESIAN_POINT('',(2.634182274245,-0.475,0.217942023204));-#4477 = DIRECTION('',(0.,1.,0.));-#4478 = DIRECTION('',(0.,-0.,1.));-#4479 = ADVANCED_FACE('',(#4480),#4498,.T.);-#4480 = FACE_BOUND('',#4481,.T.);-#4481 = EDGE_LOOP('',(#4482,#4483,#4484,#4492));-#4482 = ORIENTED_EDGE('',*,*,#4468,.T.);-#4483 = ORIENTED_EDGE('',*,*,#4389,.F.);-#4484 = ORIENTED_EDGE('',*,*,#4485,.F.);-#4485 = EDGE_CURVE('',#4486,#4382,#4488,.T.);-#4486 = VERTEX_POINT('',#4487);-#4487 = CARTESIAN_POINT('',(2.2,-0.175,0.445));-#4488 = LINE('',#4489,#4490);-#4489 = CARTESIAN_POINT('',(2.2,-0.175,0.445));-#4490 = VECTOR('',#4491,1.);+#4444 = EDGE_CURVE('',#4435,#4404,#4445,.T.);+#4445 = LINE('',#4446,#4447);+#4446 = CARTESIAN_POINT('',(2.4875,-0.475,0.));+#4447 = VECTOR('',#4448,1.);+#4448 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4449 = ORIENTED_EDGE('',*,*,#4420,.F.);+#4450 = ORIENTED_EDGE('',*,*,#4451,.F.);+#4451 = EDGE_CURVE('',#4437,#4413,#4452,.T.);+#4452 = LINE('',#4453,#4454);+#4453 = CARTESIAN_POINT('',(2.4875,-0.175,0.));+#4454 = VECTOR('',#4455,1.);+#4455 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4456 = PLANE('',#4457);+#4457 = AXIS2_PLACEMENT_3D('',#4458,#4459,#4460);+#4458 = CARTESIAN_POINT('',(2.4875,-0.325,0.));+#4459 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#4460 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4461 = ADVANCED_FACE('',(#4462),#4487,.T.);+#4462 = FACE_BOUND('',#4463,.T.);+#4463 = EDGE_LOOP('',(#4464,#4474,#4480,#4481));+#4464 = ORIENTED_EDGE('',*,*,#4465,.F.);+#4465 = EDGE_CURVE('',#4466,#4468,#4470,.T.);+#4466 = VERTEX_POINT('',#4467);+#4467 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#4468 = VERTEX_POINT('',#4469);+#4469 = CARTESIAN_POINT('',(3.205,-0.175,0.));+#4470 = LINE('',#4471,#4472);+#4471 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#4472 = VECTOR('',#4473,1.);+#4473 = DIRECTION('',(0.,1.,0.));+#4474 = ORIENTED_EDGE('',*,*,#4475,.T.);+#4475 = EDGE_CURVE('',#4466,#4435,#4476,.T.);+#4476 = LINE('',#4477,#4478);+#4477 = CARTESIAN_POINT('',(3.205,-0.475,0.));+#4478 = VECTOR('',#4479,1.);+#4479 = DIRECTION('',(-1.,0.,0.));+#4480 = ORIENTED_EDGE('',*,*,#4434,.T.);+#4481 = ORIENTED_EDGE('',*,*,#4482,.F.);+#4482 = EDGE_CURVE('',#4468,#4437,#4483,.T.);+#4483 = LINE('',#4484,#4485);+#4484 = CARTESIAN_POINT('',(3.205,-0.175,0.));+#4485 = VECTOR('',#4486,1.);+#4486 = DIRECTION('',(-1.,0.,0.));+#4487 = PLANE('',#4488);+#4488 = AXIS2_PLACEMENT_3D('',#4489,#4490,#4491);+#4489 = CARTESIAN_POINT('',(3.205,-0.325,0.));+#4490 = DIRECTION('',(-0.,-0.,-1.)); #4491 = DIRECTION('',(-1.,0.,0.));-#4492 = ORIENTED_EDGE('',*,*,#4493,.T.);-#4493 = EDGE_CURVE('',#4486,#4461,#4494,.T.);-#4494 = LINE('',#4495,#4496);-#4495 = CARTESIAN_POINT('',(2.2,-0.175,0.445));-#4496 = VECTOR('',#4497,1.);-#4497 = DIRECTION('',(0.,-1.,0.));-#4498 = PLANE('',#4499);-#4499 = AXIS2_PLACEMENT_3D('',#4500,#4501,#4502);-#4500 = CARTESIAN_POINT('',(2.2,-0.325,0.445));-#4501 = DIRECTION('',(-0.,-0.,-1.));-#4502 = DIRECTION('',(-1.,0.,0.));-#4503 = ADVANCED_FACE('',(#4504),#4522,.T.);-#4504 = FACE_BOUND('',#4505,.T.);-#4505 = EDGE_LOOP('',(#4506,#4507,#4508,#4516));-#4506 = ORIENTED_EDGE('',*,*,#4412,.F.);-#4507 = ORIENTED_EDGE('',*,*,#4436,.T.);-#4508 = ORIENTED_EDGE('',*,*,#4509,.T.);-#4509 = EDGE_CURVE('',#4437,#4510,#4512,.T.);-#4510 = VERTEX_POINT('',#4511);-#4511 = CARTESIAN_POINT('',(3.205,-0.175,0.15));-#4512 = LINE('',#4513,#4514);-#4513 = CARTESIAN_POINT('',(3.205,-0.475,0.15));-#4514 = VECTOR('',#4515,1.);-#4515 = DIRECTION('',(0.,1.,0.));-#4516 = ORIENTED_EDGE('',*,*,#4517,.F.);-#4517 = EDGE_CURVE('',#4413,#4510,#4518,.T.);-#4518 = LINE('',#4519,#4520);-#4519 = CARTESIAN_POINT('',(2.6375,-0.175,0.15));-#4520 = VECTOR('',#4521,1.);+#4492 = ADVANCED_FACE('',(#4493),#4518,.T.);+#4493 = FACE_BOUND('',#4494,.T.);+#4494 = EDGE_LOOP('',(#4495,#4505,#4511,#4512));+#4495 = ORIENTED_EDGE('',*,*,#4496,.F.);+#4496 = EDGE_CURVE('',#4497,#4499,#4501,.T.);+#4497 = VERTEX_POINT('',#4498);+#4498 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#4499 = VERTEX_POINT('',#4500);+#4500 = CARTESIAN_POINT('',(3.205,-0.175,0.15));+#4501 = LINE('',#4502,#4503);+#4502 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#4503 = VECTOR('',#4504,1.);+#4504 = DIRECTION('',(0.,1.,0.));+#4505 = ORIENTED_EDGE('',*,*,#4506,.T.);+#4506 = EDGE_CURVE('',#4497,#4466,#4507,.T.);+#4507 = LINE('',#4508,#4509);+#4508 = CARTESIAN_POINT('',(3.205,-0.475,0.15));+#4509 = VECTOR('',#4510,1.);+#4510 = DIRECTION('',(0.,0.,-1.));+#4511 = ORIENTED_EDGE('',*,*,#4465,.T.);+#4512 = ORIENTED_EDGE('',*,*,#4513,.F.);+#4513 = EDGE_CURVE('',#4499,#4468,#4514,.T.);+#4514 = LINE('',#4515,#4516);+#4515 = CARTESIAN_POINT('',(3.205,-0.175,0.15));+#4516 = VECTOR('',#4517,1.);+#4517 = DIRECTION('',(0.,0.,-1.));+#4518 = PLANE('',#4519);+#4519 = AXIS2_PLACEMENT_3D('',#4520,#4521,#4522);+#4520 = CARTESIAN_POINT('',(3.205,-0.325,0.15)); #4521 = DIRECTION('',(1.,0.,0.));-#4522 = PLANE('',#4523);-#4523 = AXIS2_PLACEMENT_3D('',#4524,#4525,#4526);-#4524 = CARTESIAN_POINT('',(2.6375,-0.325,0.15));-#4525 = DIRECTION('',(-0.,0.,1.));-#4526 = DIRECTION('',(1.,0.,0.));-#4527 = ADVANCED_FACE('',(#4528),#4557,.T.);-#4528 = FACE_BOUND('',#4529,.T.);-#4529 = EDGE_LOOP('',(#4530,#4531,#4532,#4533,#4541,#4549,#4555,#4556));-#4530 = ORIENTED_EDGE('',*,*,#4350,.T.);-#4531 = ORIENTED_EDGE('',*,*,#4420,.T.);-#4532 = ORIENTED_EDGE('',*,*,#4517,.T.);-#4533 = ORIENTED_EDGE('',*,*,#4534,.T.);-#4534 = EDGE_CURVE('',#4510,#4535,#4537,.T.);-#4535 = VERTEX_POINT('',#4536);-#4536 = CARTESIAN_POINT('',(3.205,-0.175,0.));-#4537 = LINE('',#4538,#4539);-#4538 = CARTESIAN_POINT('',(3.205,-0.175,0.15));-#4539 = VECTOR('',#4540,1.);-#4540 = DIRECTION('',(0.,0.,-1.));-#4541 = ORIENTED_EDGE('',*,*,#4542,.T.);-#4542 = EDGE_CURVE('',#4535,#4543,#4545,.T.);-#4543 = VERTEX_POINT('',#4544);-#4544 = CARTESIAN_POINT('',(2.4875,-0.175,0.));+#4522 = DIRECTION('',(0.,0.,-1.));+#4523 = ADVANCED_FACE('',(#4524),#4549,.T.);+#4524 = FACE_BOUND('',#4525,.T.);+#4525 = EDGE_LOOP('',(#4526,#4536,#4542,#4543));+#4526 = ORIENTED_EDGE('',*,*,#4527,.F.);+#4527 = EDGE_CURVE('',#4528,#4530,#4532,.T.);+#4528 = VERTEX_POINT('',#4529);+#4529 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#4530 = VERTEX_POINT('',#4531);+#4531 = CARTESIAN_POINT('',(2.6375,-0.175,0.15));+#4532 = LINE('',#4533,#4534);+#4533 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#4534 = VECTOR('',#4535,1.);+#4535 = DIRECTION('',(0.,1.,0.));+#4536 = ORIENTED_EDGE('',*,*,#4537,.T.);+#4537 = EDGE_CURVE('',#4528,#4497,#4538,.T.);+#4538 = LINE('',#4539,#4540);+#4539 = CARTESIAN_POINT('',(2.6375,-0.475,0.15));+#4540 = VECTOR('',#4541,1.);+#4541 = DIRECTION('',(1.,0.,0.));+#4542 = ORIENTED_EDGE('',*,*,#4496,.T.);+#4543 = ORIENTED_EDGE('',*,*,#4544,.F.);+#4544 = EDGE_CURVE('',#4530,#4499,#4545,.T.); #4545 = LINE('',#4546,#4547);-#4546 = CARTESIAN_POINT('',(3.205,-0.175,0.));+#4546 = CARTESIAN_POINT('',(2.6375,-0.175,0.15)); #4547 = VECTOR('',#4548,1.);-#4548 = DIRECTION('',(-1.,0.,0.));-#4549 = ORIENTED_EDGE('',*,*,#4550,.T.);-#4550 = EDGE_CURVE('',#4543,#4486,#4551,.T.);-#4551 = LINE('',#4552,#4553);-#4552 = CARTESIAN_POINT('',(2.4875,-0.175,0.));-#4553 = VECTOR('',#4554,1.);-#4554 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4555 = ORIENTED_EDGE('',*,*,#4485,.T.);-#4556 = ORIENTED_EDGE('',*,*,#4381,.T.);-#4557 = PLANE('',#4558);-#4558 = AXIS2_PLACEMENT_3D('',#4559,#4560,#4561);-#4559 = CARTESIAN_POINT('',(2.634182274245,-0.175,0.217942023204));-#4560 = DIRECTION('',(0.,1.,0.));-#4561 = DIRECTION('',(0.,-0.,1.));-#4562 = ADVANCED_FACE('',(#4563),#4574,.T.);-#4563 = FACE_BOUND('',#4564,.T.);-#4564 = EDGE_LOOP('',(#4565,#4566,#4567,#4573));-#4565 = ORIENTED_EDGE('',*,*,#4509,.F.);-#4566 = ORIENTED_EDGE('',*,*,#4444,.T.);-#4567 = ORIENTED_EDGE('',*,*,#4568,.T.);-#4568 = EDGE_CURVE('',#4445,#4535,#4569,.T.);-#4569 = LINE('',#4570,#4571);-#4570 = CARTESIAN_POINT('',(3.205,-0.475,0.));-#4571 = VECTOR('',#4572,1.);-#4572 = DIRECTION('',(0.,1.,0.));-#4573 = ORIENTED_EDGE('',*,*,#4534,.F.);-#4574 = PLANE('',#4575);-#4575 = AXIS2_PLACEMENT_3D('',#4576,#4577,#4578);-#4576 = CARTESIAN_POINT('',(3.205,-0.325,0.15));-#4577 = DIRECTION('',(1.,0.,0.));-#4578 = DIRECTION('',(0.,0.,-1.));-#4579 = ADVANCED_FACE('',(#4580),#4591,.T.);-#4580 = FACE_BOUND('',#4581,.T.);-#4581 = EDGE_LOOP('',(#4582,#4583,#4584,#4590));-#4582 = ORIENTED_EDGE('',*,*,#4568,.F.);-#4583 = ORIENTED_EDGE('',*,*,#4452,.T.);-#4584 = ORIENTED_EDGE('',*,*,#4585,.T.);-#4585 = EDGE_CURVE('',#4453,#4543,#4586,.T.);-#4586 = LINE('',#4587,#4588);-#4587 = CARTESIAN_POINT('',(2.4875,-0.475,0.));-#4588 = VECTOR('',#4589,1.);-#4589 = DIRECTION('',(0.,1.,0.));-#4590 = ORIENTED_EDGE('',*,*,#4542,.F.);-#4591 = PLANE('',#4592);-#4592 = AXIS2_PLACEMENT_3D('',#4593,#4594,#4595);-#4593 = CARTESIAN_POINT('',(3.205,-0.325,0.));-#4594 = DIRECTION('',(-0.,-0.,-1.));-#4595 = DIRECTION('',(-1.,0.,0.));-#4596 = ADVANCED_FACE('',(#4597),#4603,.T.);-#4597 = FACE_BOUND('',#4598,.T.);-#4598 = EDGE_LOOP('',(#4599,#4600,#4601,#4602));-#4599 = ORIENTED_EDGE('',*,*,#4585,.F.);-#4600 = ORIENTED_EDGE('',*,*,#4460,.T.);-#4601 = ORIENTED_EDGE('',*,*,#4493,.F.);-#4602 = ORIENTED_EDGE('',*,*,#4550,.F.);+#4548 = DIRECTION('',(1.,0.,0.));+#4549 = PLANE('',#4550);+#4550 = AXIS2_PLACEMENT_3D('',#4551,#4552,#4553);+#4551 = CARTESIAN_POINT('',(2.6375,-0.325,0.15));+#4552 = DIRECTION('',(-0.,0.,1.));+#4553 = DIRECTION('',(1.,0.,0.));+#4554 = ADVANCED_FACE('',(#4555),#4570,.T.);+#4555 = FACE_BOUND('',#4556,.T.);+#4556 = EDGE_LOOP('',(#4557,#4558,#4564,#4565,#4566,#4567,#4568,#4569));+#4557 = ORIENTED_EDGE('',*,*,#4350,.T.);+#4558 = ORIENTED_EDGE('',*,*,#4559,.T.);+#4559 = EDGE_CURVE('',#4343,#4530,#4560,.T.);+#4560 = LINE('',#4561,#4562);+#4561 = CARTESIAN_POINT('',(2.35,-0.175,0.595));+#4562 = VECTOR('',#4563,1.);+#4563 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4564 = ORIENTED_EDGE('',*,*,#4544,.T.);+#4565 = ORIENTED_EDGE('',*,*,#4513,.T.);+#4566 = ORIENTED_EDGE('',*,*,#4482,.T.);+#4567 = ORIENTED_EDGE('',*,*,#4451,.T.);+#4568 = ORIENTED_EDGE('',*,*,#4412,.T.);+#4569 = ORIENTED_EDGE('',*,*,#4381,.T.);+#4570 = PLANE('',#4571);+#4571 = AXIS2_PLACEMENT_3D('',#4572,#4573,#4574);+#4572 = CARTESIAN_POINT('',(2.634182274245,-0.175,0.217942023204));+#4573 = DIRECTION('',(0.,1.,0.));+#4574 = DIRECTION('',(0.,-0.,1.));+#4575 = ADVANCED_FACE('',(#4576),#4587,.T.);+#4576 = FACE_BOUND('',#4577,.T.);+#4577 = EDGE_LOOP('',(#4578,#4579,#4585,#4586));+#4578 = ORIENTED_EDGE('',*,*,#4342,.F.);+#4579 = ORIENTED_EDGE('',*,*,#4580,.T.);+#4580 = EDGE_CURVE('',#4335,#4528,#4581,.T.);+#4581 = LINE('',#4582,#4583);+#4582 = CARTESIAN_POINT('',(2.35,-0.475,0.595));+#4583 = VECTOR('',#4584,1.);+#4584 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4585 = ORIENTED_EDGE('',*,*,#4527,.T.);+#4586 = ORIENTED_EDGE('',*,*,#4559,.F.);+#4587 = PLANE('',#4588);+#4588 = AXIS2_PLACEMENT_3D('',#4589,#4590,#4591);+#4589 = CARTESIAN_POINT('',(2.35,-0.325,0.595));+#4590 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#4591 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4592 = ADVANCED_FACE('',(#4593),#4603,.F.);+#4593 = FACE_BOUND('',#4594,.F.);+#4594 = EDGE_LOOP('',(#4595,#4596,#4597,#4598,#4599,#4600,#4601,#4602));+#4595 = ORIENTED_EDGE('',*,*,#4332,.T.);+#4596 = ORIENTED_EDGE('',*,*,#4580,.T.);+#4597 = ORIENTED_EDGE('',*,*,#4537,.T.);+#4598 = ORIENTED_EDGE('',*,*,#4506,.T.);+#4599 = ORIENTED_EDGE('',*,*,#4475,.T.);+#4600 = ORIENTED_EDGE('',*,*,#4444,.T.);+#4601 = ORIENTED_EDGE('',*,*,#4403,.T.);+#4602 = ORIENTED_EDGE('',*,*,#4372,.T.); #4603 = PLANE('',#4604); #4604 = AXIS2_PLACEMENT_3D('',#4605,#4606,#4607);-#4605 = CARTESIAN_POINT('',(2.4875,-0.325,0.));-#4606 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#4607 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4605 = CARTESIAN_POINT('',(2.634182274245,-0.475,0.217942023204));+#4606 = DIRECTION('',(0.,1.,0.));+#4607 = DIRECTION('',(0.,-0.,1.)); #4608 = MANIFOLD_SOLID_BREP('',#4609);-#4609 = CLOSED_SHELL('',(#4610,#4650,#4681,#4712,#4761,#4785,#4809,#4844- ,#4861,#4878));+#4609 = CLOSED_SHELL('',(#4610,#4650,#4681,#4712,#4743,#4774,#4805,#4836+ ,#4857,#4874)); #4610 = ADVANCED_FACE('',(#4611),#4645,.T.); #4611 = FACE_BOUND('',#4612,.T.); #4612 = EDGE_LOOP('',(#4613,#4623,#4631,#4639));@@ -4730,216 +4730,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #4680 = DIRECTION('',(0.,0.,1.)); #4681 = ADVANCED_FACE('',(#4682),#4707,.T.); #4682 = FACE_BOUND('',#4683,.T.);-#4683 = EDGE_LOOP('',(#4684,#4685,#4693,#4701));-#4684 = ORIENTED_EDGE('',*,*,#4624,.F.);-#4685 = ORIENTED_EDGE('',*,*,#4686,.T.);-#4686 = EDGE_CURVE('',#4617,#4687,#4689,.T.);-#4687 = VERTEX_POINT('',#4688);-#4688 = CARTESIAN_POINT('',(2.6375,0.175,0.15));-#4689 = LINE('',#4690,#4691);-#4690 = CARTESIAN_POINT('',(2.35,0.175,0.595));-#4691 = VECTOR('',#4692,1.);-#4692 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4693 = ORIENTED_EDGE('',*,*,#4694,.T.);-#4694 = EDGE_CURVE('',#4687,#4695,#4697,.T.);+#4683 = EDGE_LOOP('',(#4684,#4692,#4693,#4701));+#4684 = ORIENTED_EDGE('',*,*,#4685,.T.);+#4685 = EDGE_CURVE('',#4686,#4655,#4688,.T.);+#4686 = VERTEX_POINT('',#4687);+#4687 = CARTESIAN_POINT('',(2.2,0.175,0.445));+#4688 = LINE('',#4689,#4690);+#4689 = CARTESIAN_POINT('',(2.2,0.175,0.445));+#4690 = VECTOR('',#4691,1.);+#4691 = DIRECTION('',(-1.,0.,0.));+#4692 = ORIENTED_EDGE('',*,*,#4671,.F.);+#4693 = ORIENTED_EDGE('',*,*,#4694,.F.);+#4694 = EDGE_CURVE('',#4695,#4664,#4697,.T.); #4695 = VERTEX_POINT('',#4696);-#4696 = CARTESIAN_POINT('',(2.6375,0.475,0.15));+#4696 = CARTESIAN_POINT('',(2.2,0.475,0.445)); #4697 = LINE('',#4698,#4699);-#4698 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#4698 = CARTESIAN_POINT('',(2.2,0.475,0.445)); #4699 = VECTOR('',#4700,1.);-#4700 = DIRECTION('',(0.,1.,0.));-#4701 = ORIENTED_EDGE('',*,*,#4702,.F.);-#4702 = EDGE_CURVE('',#4625,#4695,#4703,.T.);+#4700 = DIRECTION('',(-1.,0.,0.));+#4701 = ORIENTED_EDGE('',*,*,#4702,.T.);+#4702 = EDGE_CURVE('',#4695,#4686,#4703,.T.); #4703 = LINE('',#4704,#4705);-#4704 = CARTESIAN_POINT('',(2.35,0.475,0.595));+#4704 = CARTESIAN_POINT('',(2.2,0.475,0.445)); #4705 = VECTOR('',#4706,1.);-#4706 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4706 = DIRECTION('',(0.,-1.,0.)); #4707 = PLANE('',#4708); #4708 = AXIS2_PLACEMENT_3D('',#4709,#4710,#4711);-#4709 = CARTESIAN_POINT('',(2.35,0.325,0.595));-#4710 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#4711 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4712 = ADVANCED_FACE('',(#4713),#4756,.F.);-#4713 = FACE_BOUND('',#4714,.F.);-#4714 = EDGE_LOOP('',(#4715,#4716,#4717,#4725,#4733,#4741,#4749,#4755));-#4715 = ORIENTED_EDGE('',*,*,#4614,.T.);-#4716 = ORIENTED_EDGE('',*,*,#4686,.T.);-#4717 = ORIENTED_EDGE('',*,*,#4718,.T.);-#4718 = EDGE_CURVE('',#4687,#4719,#4721,.T.);+#4709 = CARTESIAN_POINT('',(2.2,0.325,0.445));+#4710 = DIRECTION('',(-0.,-0.,-1.));+#4711 = DIRECTION('',(-1.,0.,0.));+#4712 = ADVANCED_FACE('',(#4713),#4738,.T.);+#4713 = FACE_BOUND('',#4714,.T.);+#4714 = EDGE_LOOP('',(#4715,#4725,#4731,#4732));+#4715 = ORIENTED_EDGE('',*,*,#4716,.F.);+#4716 = EDGE_CURVE('',#4717,#4719,#4721,.T.);+#4717 = VERTEX_POINT('',#4718);+#4718 = CARTESIAN_POINT('',(2.4875,0.175,0.)); #4719 = VERTEX_POINT('',#4720);-#4720 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#4720 = CARTESIAN_POINT('',(2.4875,0.475,0.)); #4721 = LINE('',#4722,#4723);-#4722 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#4722 = CARTESIAN_POINT('',(2.4875,0.175,0.)); #4723 = VECTOR('',#4724,1.);-#4724 = DIRECTION('',(1.,0.,0.));+#4724 = DIRECTION('',(0.,1.,0.)); #4725 = ORIENTED_EDGE('',*,*,#4726,.T.);-#4726 = EDGE_CURVE('',#4719,#4727,#4729,.T.);-#4727 = VERTEX_POINT('',#4728);-#4728 = CARTESIAN_POINT('',(3.205,0.175,0.));-#4729 = LINE('',#4730,#4731);-#4730 = CARTESIAN_POINT('',(3.205,0.175,0.15));-#4731 = VECTOR('',#4732,1.);-#4732 = DIRECTION('',(0.,0.,-1.));-#4733 = ORIENTED_EDGE('',*,*,#4734,.T.);-#4734 = EDGE_CURVE('',#4727,#4735,#4737,.T.);-#4735 = VERTEX_POINT('',#4736);-#4736 = CARTESIAN_POINT('',(2.4875,0.175,0.));-#4737 = LINE('',#4738,#4739);-#4738 = CARTESIAN_POINT('',(3.205,0.175,0.));-#4739 = VECTOR('',#4740,1.);-#4740 = DIRECTION('',(-1.,0.,0.));-#4741 = ORIENTED_EDGE('',*,*,#4742,.T.);-#4742 = EDGE_CURVE('',#4735,#4743,#4745,.T.);-#4743 = VERTEX_POINT('',#4744);-#4744 = CARTESIAN_POINT('',(2.2,0.175,0.445));-#4745 = LINE('',#4746,#4747);-#4746 = CARTESIAN_POINT('',(2.4875,0.175,0.));-#4747 = VECTOR('',#4748,1.);-#4748 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4749 = ORIENTED_EDGE('',*,*,#4750,.T.);-#4750 = EDGE_CURVE('',#4743,#4655,#4751,.T.);-#4751 = LINE('',#4752,#4753);-#4752 = CARTESIAN_POINT('',(2.2,0.175,0.445));-#4753 = VECTOR('',#4754,1.);-#4754 = DIRECTION('',(-1.,0.,0.));-#4755 = ORIENTED_EDGE('',*,*,#4654,.T.);-#4756 = PLANE('',#4757);-#4757 = AXIS2_PLACEMENT_3D('',#4758,#4759,#4760);-#4758 = CARTESIAN_POINT('',(2.634182274245,0.175,0.217942023204));-#4759 = DIRECTION('',(0.,1.,0.));-#4760 = DIRECTION('',(0.,-0.,1.));-#4761 = ADVANCED_FACE('',(#4762),#4780,.T.);-#4762 = FACE_BOUND('',#4763,.T.);-#4763 = EDGE_LOOP('',(#4764,#4765,#4766,#4774));-#4764 = ORIENTED_EDGE('',*,*,#4750,.T.);-#4765 = ORIENTED_EDGE('',*,*,#4671,.F.);-#4766 = ORIENTED_EDGE('',*,*,#4767,.F.);-#4767 = EDGE_CURVE('',#4768,#4664,#4770,.T.);-#4768 = VERTEX_POINT('',#4769);-#4769 = CARTESIAN_POINT('',(2.2,0.475,0.445));-#4770 = LINE('',#4771,#4772);-#4771 = CARTESIAN_POINT('',(2.2,0.475,0.445));-#4772 = VECTOR('',#4773,1.);+#4726 = EDGE_CURVE('',#4717,#4686,#4727,.T.);+#4727 = LINE('',#4728,#4729);+#4728 = CARTESIAN_POINT('',(2.4875,0.175,0.));+#4729 = VECTOR('',#4730,1.);+#4730 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4731 = ORIENTED_EDGE('',*,*,#4702,.F.);+#4732 = ORIENTED_EDGE('',*,*,#4733,.F.);+#4733 = EDGE_CURVE('',#4719,#4695,#4734,.T.);+#4734 = LINE('',#4735,#4736);+#4735 = CARTESIAN_POINT('',(2.4875,0.475,0.));+#4736 = VECTOR('',#4737,1.);+#4737 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4738 = PLANE('',#4739);+#4739 = AXIS2_PLACEMENT_3D('',#4740,#4741,#4742);+#4740 = CARTESIAN_POINT('',(2.4875,0.325,0.));+#4741 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#4742 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4743 = ADVANCED_FACE('',(#4744),#4769,.T.);+#4744 = FACE_BOUND('',#4745,.T.);+#4745 = EDGE_LOOP('',(#4746,#4756,#4762,#4763));+#4746 = ORIENTED_EDGE('',*,*,#4747,.F.);+#4747 = EDGE_CURVE('',#4748,#4750,#4752,.T.);+#4748 = VERTEX_POINT('',#4749);+#4749 = CARTESIAN_POINT('',(3.205,0.175,0.));+#4750 = VERTEX_POINT('',#4751);+#4751 = CARTESIAN_POINT('',(3.205,0.475,0.));+#4752 = LINE('',#4753,#4754);+#4753 = CARTESIAN_POINT('',(3.205,0.175,0.));+#4754 = VECTOR('',#4755,1.);+#4755 = DIRECTION('',(0.,1.,0.));+#4756 = ORIENTED_EDGE('',*,*,#4757,.T.);+#4757 = EDGE_CURVE('',#4748,#4717,#4758,.T.);+#4758 = LINE('',#4759,#4760);+#4759 = CARTESIAN_POINT('',(3.205,0.175,0.));+#4760 = VECTOR('',#4761,1.);+#4761 = DIRECTION('',(-1.,0.,0.));+#4762 = ORIENTED_EDGE('',*,*,#4716,.T.);+#4763 = ORIENTED_EDGE('',*,*,#4764,.F.);+#4764 = EDGE_CURVE('',#4750,#4719,#4765,.T.);+#4765 = LINE('',#4766,#4767);+#4766 = CARTESIAN_POINT('',(3.205,0.475,0.));+#4767 = VECTOR('',#4768,1.);+#4768 = DIRECTION('',(-1.,0.,0.));+#4769 = PLANE('',#4770);+#4770 = AXIS2_PLACEMENT_3D('',#4771,#4772,#4773);+#4771 = CARTESIAN_POINT('',(3.205,0.325,0.));+#4772 = DIRECTION('',(-0.,-0.,-1.)); #4773 = DIRECTION('',(-1.,0.,0.));-#4774 = ORIENTED_EDGE('',*,*,#4775,.T.);-#4775 = EDGE_CURVE('',#4768,#4743,#4776,.T.);-#4776 = LINE('',#4777,#4778);-#4777 = CARTESIAN_POINT('',(2.2,0.475,0.445));-#4778 = VECTOR('',#4779,1.);-#4779 = DIRECTION('',(0.,-1.,0.));-#4780 = PLANE('',#4781);-#4781 = AXIS2_PLACEMENT_3D('',#4782,#4783,#4784);-#4782 = CARTESIAN_POINT('',(2.2,0.325,0.445));-#4783 = DIRECTION('',(-0.,-0.,-1.));-#4784 = DIRECTION('',(-1.,0.,0.));-#4785 = ADVANCED_FACE('',(#4786),#4804,.T.);-#4786 = FACE_BOUND('',#4787,.T.);-#4787 = EDGE_LOOP('',(#4788,#4789,#4790,#4798));-#4788 = ORIENTED_EDGE('',*,*,#4694,.F.);-#4789 = ORIENTED_EDGE('',*,*,#4718,.T.);-#4790 = ORIENTED_EDGE('',*,*,#4791,.T.);-#4791 = EDGE_CURVE('',#4719,#4792,#4794,.T.);-#4792 = VERTEX_POINT('',#4793);-#4793 = CARTESIAN_POINT('',(3.205,0.475,0.15));-#4794 = LINE('',#4795,#4796);-#4795 = CARTESIAN_POINT('',(3.205,0.175,0.15));-#4796 = VECTOR('',#4797,1.);-#4797 = DIRECTION('',(0.,1.,0.));-#4798 = ORIENTED_EDGE('',*,*,#4799,.F.);-#4799 = EDGE_CURVE('',#4695,#4792,#4800,.T.);-#4800 = LINE('',#4801,#4802);-#4801 = CARTESIAN_POINT('',(2.6375,0.475,0.15));-#4802 = VECTOR('',#4803,1.);+#4774 = ADVANCED_FACE('',(#4775),#4800,.T.);+#4775 = FACE_BOUND('',#4776,.T.);+#4776 = EDGE_LOOP('',(#4777,#4787,#4793,#4794));+#4777 = ORIENTED_EDGE('',*,*,#4778,.F.);+#4778 = EDGE_CURVE('',#4779,#4781,#4783,.T.);+#4779 = VERTEX_POINT('',#4780);+#4780 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#4781 = VERTEX_POINT('',#4782);+#4782 = CARTESIAN_POINT('',(3.205,0.475,0.15));+#4783 = LINE('',#4784,#4785);+#4784 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#4785 = VECTOR('',#4786,1.);+#4786 = DIRECTION('',(0.,1.,0.));+#4787 = ORIENTED_EDGE('',*,*,#4788,.T.);+#4788 = EDGE_CURVE('',#4779,#4748,#4789,.T.);+#4789 = LINE('',#4790,#4791);+#4790 = CARTESIAN_POINT('',(3.205,0.175,0.15));+#4791 = VECTOR('',#4792,1.);+#4792 = DIRECTION('',(0.,0.,-1.));+#4793 = ORIENTED_EDGE('',*,*,#4747,.T.);+#4794 = ORIENTED_EDGE('',*,*,#4795,.F.);+#4795 = EDGE_CURVE('',#4781,#4750,#4796,.T.);+#4796 = LINE('',#4797,#4798);+#4797 = CARTESIAN_POINT('',(3.205,0.475,0.15));+#4798 = VECTOR('',#4799,1.);+#4799 = DIRECTION('',(0.,0.,-1.));+#4800 = PLANE('',#4801);+#4801 = AXIS2_PLACEMENT_3D('',#4802,#4803,#4804);+#4802 = CARTESIAN_POINT('',(3.205,0.325,0.15)); #4803 = DIRECTION('',(1.,0.,0.));-#4804 = PLANE('',#4805);-#4805 = AXIS2_PLACEMENT_3D('',#4806,#4807,#4808);-#4806 = CARTESIAN_POINT('',(2.6375,0.325,0.15));-#4807 = DIRECTION('',(-0.,0.,1.));-#4808 = DIRECTION('',(1.,0.,0.));-#4809 = ADVANCED_FACE('',(#4810),#4839,.T.);-#4810 = FACE_BOUND('',#4811,.T.);-#4811 = EDGE_LOOP('',(#4812,#4813,#4814,#4815,#4823,#4831,#4837,#4838));-#4812 = ORIENTED_EDGE('',*,*,#4632,.T.);-#4813 = ORIENTED_EDGE('',*,*,#4702,.T.);-#4814 = ORIENTED_EDGE('',*,*,#4799,.T.);-#4815 = ORIENTED_EDGE('',*,*,#4816,.T.);-#4816 = EDGE_CURVE('',#4792,#4817,#4819,.T.);-#4817 = VERTEX_POINT('',#4818);-#4818 = CARTESIAN_POINT('',(3.205,0.475,0.));-#4819 = LINE('',#4820,#4821);-#4820 = CARTESIAN_POINT('',(3.205,0.475,0.15));-#4821 = VECTOR('',#4822,1.);-#4822 = DIRECTION('',(0.,0.,-1.));-#4823 = ORIENTED_EDGE('',*,*,#4824,.T.);-#4824 = EDGE_CURVE('',#4817,#4825,#4827,.T.);-#4825 = VERTEX_POINT('',#4826);-#4826 = CARTESIAN_POINT('',(2.4875,0.475,0.));+#4804 = DIRECTION('',(0.,0.,-1.));+#4805 = ADVANCED_FACE('',(#4806),#4831,.T.);+#4806 = FACE_BOUND('',#4807,.T.);+#4807 = EDGE_LOOP('',(#4808,#4818,#4824,#4825));+#4808 = ORIENTED_EDGE('',*,*,#4809,.F.);+#4809 = EDGE_CURVE('',#4810,#4812,#4814,.T.);+#4810 = VERTEX_POINT('',#4811);+#4811 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#4812 = VERTEX_POINT('',#4813);+#4813 = CARTESIAN_POINT('',(2.6375,0.475,0.15));+#4814 = LINE('',#4815,#4816);+#4815 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#4816 = VECTOR('',#4817,1.);+#4817 = DIRECTION('',(0.,1.,0.));+#4818 = ORIENTED_EDGE('',*,*,#4819,.T.);+#4819 = EDGE_CURVE('',#4810,#4779,#4820,.T.);+#4820 = LINE('',#4821,#4822);+#4821 = CARTESIAN_POINT('',(2.6375,0.175,0.15));+#4822 = VECTOR('',#4823,1.);+#4823 = DIRECTION('',(1.,0.,0.));+#4824 = ORIENTED_EDGE('',*,*,#4778,.T.);+#4825 = ORIENTED_EDGE('',*,*,#4826,.F.);+#4826 = EDGE_CURVE('',#4812,#4781,#4827,.T.); #4827 = LINE('',#4828,#4829);-#4828 = CARTESIAN_POINT('',(3.205,0.475,0.));+#4828 = CARTESIAN_POINT('',(2.6375,0.475,0.15)); #4829 = VECTOR('',#4830,1.);-#4830 = DIRECTION('',(-1.,0.,0.));-#4831 = ORIENTED_EDGE('',*,*,#4832,.T.);-#4832 = EDGE_CURVE('',#4825,#4768,#4833,.T.);-#4833 = LINE('',#4834,#4835);-#4834 = CARTESIAN_POINT('',(2.4875,0.475,0.));-#4835 = VECTOR('',#4836,1.);-#4836 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#4837 = ORIENTED_EDGE('',*,*,#4767,.T.);-#4838 = ORIENTED_EDGE('',*,*,#4663,.T.);-#4839 = PLANE('',#4840);-#4840 = AXIS2_PLACEMENT_3D('',#4841,#4842,#4843);-#4841 = CARTESIAN_POINT('',(2.634182274245,0.475,0.217942023204));-#4842 = DIRECTION('',(0.,1.,0.));-#4843 = DIRECTION('',(0.,-0.,1.));-#4844 = ADVANCED_FACE('',(#4845),#4856,.T.);-#4845 = FACE_BOUND('',#4846,.T.);-#4846 = EDGE_LOOP('',(#4847,#4848,#4849,#4855));-#4847 = ORIENTED_EDGE('',*,*,#4791,.F.);-#4848 = ORIENTED_EDGE('',*,*,#4726,.T.);-#4849 = ORIENTED_EDGE('',*,*,#4850,.T.);-#4850 = EDGE_CURVE('',#4727,#4817,#4851,.T.);-#4851 = LINE('',#4852,#4853);-#4852 = CARTESIAN_POINT('',(3.205,0.175,0.));-#4853 = VECTOR('',#4854,1.);-#4854 = DIRECTION('',(0.,1.,0.));-#4855 = ORIENTED_EDGE('',*,*,#4816,.F.);-#4856 = PLANE('',#4857);-#4857 = AXIS2_PLACEMENT_3D('',#4858,#4859,#4860);-#4858 = CARTESIAN_POINT('',(3.205,0.325,0.15));-#4859 = DIRECTION('',(1.,0.,0.));-#4860 = DIRECTION('',(0.,0.,-1.));-#4861 = ADVANCED_FACE('',(#4862),#4873,.T.);-#4862 = FACE_BOUND('',#4863,.T.);-#4863 = EDGE_LOOP('',(#4864,#4865,#4866,#4872));-#4864 = ORIENTED_EDGE('',*,*,#4850,.F.);-#4865 = ORIENTED_EDGE('',*,*,#4734,.T.);-#4866 = ORIENTED_EDGE('',*,*,#4867,.T.);-#4867 = EDGE_CURVE('',#4735,#4825,#4868,.T.);-#4868 = LINE('',#4869,#4870);-#4869 = CARTESIAN_POINT('',(2.4875,0.175,0.));-#4870 = VECTOR('',#4871,1.);-#4871 = DIRECTION('',(0.,1.,0.));-#4872 = ORIENTED_EDGE('',*,*,#4824,.F.);-#4873 = PLANE('',#4874);-#4874 = AXIS2_PLACEMENT_3D('',#4875,#4876,#4877);-#4875 = CARTESIAN_POINT('',(3.205,0.325,0.));-#4876 = DIRECTION('',(-0.,-0.,-1.));-#4877 = DIRECTION('',(-1.,0.,0.));-#4878 = ADVANCED_FACE('',(#4879),#4885,.T.);-#4879 = FACE_BOUND('',#4880,.T.);-#4880 = EDGE_LOOP('',(#4881,#4882,#4883,#4884));-#4881 = ORIENTED_EDGE('',*,*,#4867,.F.);-#4882 = ORIENTED_EDGE('',*,*,#4742,.T.);-#4883 = ORIENTED_EDGE('',*,*,#4775,.F.);-#4884 = ORIENTED_EDGE('',*,*,#4832,.F.);+#4830 = DIRECTION('',(1.,0.,0.));+#4831 = PLANE('',#4832);+#4832 = AXIS2_PLACEMENT_3D('',#4833,#4834,#4835);+#4833 = CARTESIAN_POINT('',(2.6375,0.325,0.15));+#4834 = DIRECTION('',(-0.,0.,1.));+#4835 = DIRECTION('',(1.,0.,0.));+#4836 = ADVANCED_FACE('',(#4837),#4852,.T.);+#4837 = FACE_BOUND('',#4838,.T.);+#4838 = EDGE_LOOP('',(#4839,#4840,#4846,#4847,#4848,#4849,#4850,#4851));+#4839 = ORIENTED_EDGE('',*,*,#4632,.T.);+#4840 = ORIENTED_EDGE('',*,*,#4841,.T.);+#4841 = EDGE_CURVE('',#4625,#4812,#4842,.T.);+#4842 = LINE('',#4843,#4844);+#4843 = CARTESIAN_POINT('',(2.35,0.475,0.595));+#4844 = VECTOR('',#4845,1.);+#4845 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4846 = ORIENTED_EDGE('',*,*,#4826,.T.);+#4847 = ORIENTED_EDGE('',*,*,#4795,.T.);+#4848 = ORIENTED_EDGE('',*,*,#4764,.T.);+#4849 = ORIENTED_EDGE('',*,*,#4733,.T.);+#4850 = ORIENTED_EDGE('',*,*,#4694,.T.);+#4851 = ORIENTED_EDGE('',*,*,#4663,.T.);+#4852 = PLANE('',#4853);+#4853 = AXIS2_PLACEMENT_3D('',#4854,#4855,#4856);+#4854 = CARTESIAN_POINT('',(2.634182274245,0.475,0.217942023204));+#4855 = DIRECTION('',(0.,1.,0.));+#4856 = DIRECTION('',(0.,-0.,1.));+#4857 = ADVANCED_FACE('',(#4858),#4869,.T.);+#4858 = FACE_BOUND('',#4859,.T.);+#4859 = EDGE_LOOP('',(#4860,#4861,#4867,#4868));+#4860 = ORIENTED_EDGE('',*,*,#4624,.F.);+#4861 = ORIENTED_EDGE('',*,*,#4862,.T.);+#4862 = EDGE_CURVE('',#4617,#4810,#4863,.T.);+#4863 = LINE('',#4864,#4865);+#4864 = CARTESIAN_POINT('',(2.35,0.175,0.595));+#4865 = VECTOR('',#4866,1.);+#4866 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4867 = ORIENTED_EDGE('',*,*,#4809,.T.);+#4868 = ORIENTED_EDGE('',*,*,#4841,.F.);+#4869 = PLANE('',#4870);+#4870 = AXIS2_PLACEMENT_3D('',#4871,#4872,#4873);+#4871 = CARTESIAN_POINT('',(2.35,0.325,0.595));+#4872 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#4873 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4874 = ADVANCED_FACE('',(#4875),#4885,.F.);+#4875 = FACE_BOUND('',#4876,.F.);+#4876 = EDGE_LOOP('',(#4877,#4878,#4879,#4880,#4881,#4882,#4883,#4884));+#4877 = ORIENTED_EDGE('',*,*,#4614,.T.);+#4878 = ORIENTED_EDGE('',*,*,#4862,.T.);+#4879 = ORIENTED_EDGE('',*,*,#4819,.T.);+#4880 = ORIENTED_EDGE('',*,*,#4788,.T.);+#4881 = ORIENTED_EDGE('',*,*,#4757,.T.);+#4882 = ORIENTED_EDGE('',*,*,#4726,.T.);+#4883 = ORIENTED_EDGE('',*,*,#4685,.T.);+#4884 = ORIENTED_EDGE('',*,*,#4654,.T.); #4885 = PLANE('',#4886); #4886 = AXIS2_PLACEMENT_3D('',#4887,#4888,#4889);-#4887 = CARTESIAN_POINT('',(2.4875,0.325,0.));-#4888 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#4889 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#4887 = CARTESIAN_POINT('',(2.634182274245,0.175,0.217942023204));+#4888 = DIRECTION('',(0.,1.,0.));+#4889 = DIRECTION('',(0.,-0.,1.)); #4890 = MANIFOLD_SOLID_BREP('',#4891);-#4891 = CLOSED_SHELL('',(#4892,#4932,#4963,#4994,#5043,#5067,#5091,#5126- ,#5143,#5160));+#4891 = CLOSED_SHELL('',(#4892,#4932,#4963,#4994,#5025,#5056,#5087,#5118+ ,#5139,#5156)); #4892 = ADVANCED_FACE('',(#4893),#4927,.T.); #4893 = FACE_BOUND('',#4894,.T.); #4894 = EDGE_LOOP('',(#4895,#4905,#4913,#4921));@@ -5013,216 +5013,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #4962 = DIRECTION('',(0.,0.,1.)); #4963 = ADVANCED_FACE('',(#4964),#4989,.T.); #4964 = FACE_BOUND('',#4965,.T.);-#4965 = EDGE_LOOP('',(#4966,#4967,#4975,#4983));-#4966 = ORIENTED_EDGE('',*,*,#4906,.F.);-#4967 = ORIENTED_EDGE('',*,*,#4968,.T.);-#4968 = EDGE_CURVE('',#4899,#4969,#4971,.T.);-#4969 = VERTEX_POINT('',#4970);-#4970 = CARTESIAN_POINT('',(2.6375,0.825,0.15));-#4971 = LINE('',#4972,#4973);-#4972 = CARTESIAN_POINT('',(2.35,0.825,0.595));-#4973 = VECTOR('',#4974,1.);-#4974 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4975 = ORIENTED_EDGE('',*,*,#4976,.T.);-#4976 = EDGE_CURVE('',#4969,#4977,#4979,.T.);+#4965 = EDGE_LOOP('',(#4966,#4974,#4975,#4983));+#4966 = ORIENTED_EDGE('',*,*,#4967,.T.);+#4967 = EDGE_CURVE('',#4968,#4937,#4970,.T.);+#4968 = VERTEX_POINT('',#4969);+#4969 = CARTESIAN_POINT('',(2.2,0.825,0.445));+#4970 = LINE('',#4971,#4972);+#4971 = CARTESIAN_POINT('',(2.2,0.825,0.445));+#4972 = VECTOR('',#4973,1.);+#4973 = DIRECTION('',(-1.,0.,0.));+#4974 = ORIENTED_EDGE('',*,*,#4953,.F.);+#4975 = ORIENTED_EDGE('',*,*,#4976,.F.);+#4976 = EDGE_CURVE('',#4977,#4946,#4979,.T.); #4977 = VERTEX_POINT('',#4978);-#4978 = CARTESIAN_POINT('',(2.6375,1.125,0.15));+#4978 = CARTESIAN_POINT('',(2.2,1.125,0.445)); #4979 = LINE('',#4980,#4981);-#4980 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#4980 = CARTESIAN_POINT('',(2.2,1.125,0.445)); #4981 = VECTOR('',#4982,1.);-#4982 = DIRECTION('',(0.,1.,0.));-#4983 = ORIENTED_EDGE('',*,*,#4984,.F.);-#4984 = EDGE_CURVE('',#4907,#4977,#4985,.T.);+#4982 = DIRECTION('',(-1.,0.,0.));+#4983 = ORIENTED_EDGE('',*,*,#4984,.T.);+#4984 = EDGE_CURVE('',#4977,#4968,#4985,.T.); #4985 = LINE('',#4986,#4987);-#4986 = CARTESIAN_POINT('',(2.35,1.125,0.595));+#4986 = CARTESIAN_POINT('',(2.2,1.125,0.445)); #4987 = VECTOR('',#4988,1.);-#4988 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#4988 = DIRECTION('',(0.,-1.,0.)); #4989 = PLANE('',#4990); #4990 = AXIS2_PLACEMENT_3D('',#4991,#4992,#4993);-#4991 = CARTESIAN_POINT('',(2.35,0.975,0.595));-#4992 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#4993 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#4994 = ADVANCED_FACE('',(#4995),#5038,.F.);-#4995 = FACE_BOUND('',#4996,.F.);-#4996 = EDGE_LOOP('',(#4997,#4998,#4999,#5007,#5015,#5023,#5031,#5037));-#4997 = ORIENTED_EDGE('',*,*,#4896,.T.);-#4998 = ORIENTED_EDGE('',*,*,#4968,.T.);-#4999 = ORIENTED_EDGE('',*,*,#5000,.T.);-#5000 = EDGE_CURVE('',#4969,#5001,#5003,.T.);+#4991 = CARTESIAN_POINT('',(2.2,0.975,0.445));+#4992 = DIRECTION('',(-0.,-0.,-1.));+#4993 = DIRECTION('',(-1.,0.,0.));+#4994 = ADVANCED_FACE('',(#4995),#5020,.T.);+#4995 = FACE_BOUND('',#4996,.T.);+#4996 = EDGE_LOOP('',(#4997,#5007,#5013,#5014));+#4997 = ORIENTED_EDGE('',*,*,#4998,.F.);+#4998 = EDGE_CURVE('',#4999,#5001,#5003,.T.);+#4999 = VERTEX_POINT('',#5000);+#5000 = CARTESIAN_POINT('',(2.4875,0.825,0.)); #5001 = VERTEX_POINT('',#5002);-#5002 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#5002 = CARTESIAN_POINT('',(2.4875,1.125,0.)); #5003 = LINE('',#5004,#5005);-#5004 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#5004 = CARTESIAN_POINT('',(2.4875,0.825,0.)); #5005 = VECTOR('',#5006,1.);-#5006 = DIRECTION('',(1.,0.,0.));+#5006 = DIRECTION('',(0.,1.,0.)); #5007 = ORIENTED_EDGE('',*,*,#5008,.T.);-#5008 = EDGE_CURVE('',#5001,#5009,#5011,.T.);-#5009 = VERTEX_POINT('',#5010);-#5010 = CARTESIAN_POINT('',(3.205,0.825,0.));-#5011 = LINE('',#5012,#5013);-#5012 = CARTESIAN_POINT('',(3.205,0.825,0.15));-#5013 = VECTOR('',#5014,1.);-#5014 = DIRECTION('',(0.,0.,-1.));-#5015 = ORIENTED_EDGE('',*,*,#5016,.T.);-#5016 = EDGE_CURVE('',#5009,#5017,#5019,.T.);-#5017 = VERTEX_POINT('',#5018);-#5018 = CARTESIAN_POINT('',(2.4875,0.825,0.));-#5019 = LINE('',#5020,#5021);-#5020 = CARTESIAN_POINT('',(3.205,0.825,0.));-#5021 = VECTOR('',#5022,1.);-#5022 = DIRECTION('',(-1.,0.,0.));-#5023 = ORIENTED_EDGE('',*,*,#5024,.T.);-#5024 = EDGE_CURVE('',#5017,#5025,#5027,.T.);-#5025 = VERTEX_POINT('',#5026);-#5026 = CARTESIAN_POINT('',(2.2,0.825,0.445));-#5027 = LINE('',#5028,#5029);-#5028 = CARTESIAN_POINT('',(2.4875,0.825,0.));-#5029 = VECTOR('',#5030,1.);-#5030 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5031 = ORIENTED_EDGE('',*,*,#5032,.T.);-#5032 = EDGE_CURVE('',#5025,#4937,#5033,.T.);-#5033 = LINE('',#5034,#5035);-#5034 = CARTESIAN_POINT('',(2.2,0.825,0.445));-#5035 = VECTOR('',#5036,1.);-#5036 = DIRECTION('',(-1.,0.,0.));-#5037 = ORIENTED_EDGE('',*,*,#4936,.T.);-#5038 = PLANE('',#5039);-#5039 = AXIS2_PLACEMENT_3D('',#5040,#5041,#5042);-#5040 = CARTESIAN_POINT('',(2.634182274245,0.825,0.217942023204));-#5041 = DIRECTION('',(0.,1.,0.));-#5042 = DIRECTION('',(0.,-0.,1.));-#5043 = ADVANCED_FACE('',(#5044),#5062,.T.);-#5044 = FACE_BOUND('',#5045,.T.);-#5045 = EDGE_LOOP('',(#5046,#5047,#5048,#5056));-#5046 = ORIENTED_EDGE('',*,*,#5032,.T.);-#5047 = ORIENTED_EDGE('',*,*,#4953,.F.);-#5048 = ORIENTED_EDGE('',*,*,#5049,.F.);-#5049 = EDGE_CURVE('',#5050,#4946,#5052,.T.);-#5050 = VERTEX_POINT('',#5051);-#5051 = CARTESIAN_POINT('',(2.2,1.125,0.445));-#5052 = LINE('',#5053,#5054);-#5053 = CARTESIAN_POINT('',(2.2,1.125,0.445));-#5054 = VECTOR('',#5055,1.);+#5008 = EDGE_CURVE('',#4999,#4968,#5009,.T.);+#5009 = LINE('',#5010,#5011);+#5010 = CARTESIAN_POINT('',(2.4875,0.825,0.));+#5011 = VECTOR('',#5012,1.);+#5012 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5013 = ORIENTED_EDGE('',*,*,#4984,.F.);+#5014 = ORIENTED_EDGE('',*,*,#5015,.F.);+#5015 = EDGE_CURVE('',#5001,#4977,#5016,.T.);+#5016 = LINE('',#5017,#5018);+#5017 = CARTESIAN_POINT('',(2.4875,1.125,0.));+#5018 = VECTOR('',#5019,1.);+#5019 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5020 = PLANE('',#5021);+#5021 = AXIS2_PLACEMENT_3D('',#5022,#5023,#5024);+#5022 = CARTESIAN_POINT('',(2.4875,0.975,0.));+#5023 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#5024 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5025 = ADVANCED_FACE('',(#5026),#5051,.T.);+#5026 = FACE_BOUND('',#5027,.T.);+#5027 = EDGE_LOOP('',(#5028,#5038,#5044,#5045));+#5028 = ORIENTED_EDGE('',*,*,#5029,.F.);+#5029 = EDGE_CURVE('',#5030,#5032,#5034,.T.);+#5030 = VERTEX_POINT('',#5031);+#5031 = CARTESIAN_POINT('',(3.205,0.825,0.));+#5032 = VERTEX_POINT('',#5033);+#5033 = CARTESIAN_POINT('',(3.205,1.125,0.));+#5034 = LINE('',#5035,#5036);+#5035 = CARTESIAN_POINT('',(3.205,0.825,0.));+#5036 = VECTOR('',#5037,1.);+#5037 = DIRECTION('',(0.,1.,0.));+#5038 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5039 = EDGE_CURVE('',#5030,#4999,#5040,.T.);+#5040 = LINE('',#5041,#5042);+#5041 = CARTESIAN_POINT('',(3.205,0.825,0.));+#5042 = VECTOR('',#5043,1.);+#5043 = DIRECTION('',(-1.,0.,0.));+#5044 = ORIENTED_EDGE('',*,*,#4998,.T.);+#5045 = ORIENTED_EDGE('',*,*,#5046,.F.);+#5046 = EDGE_CURVE('',#5032,#5001,#5047,.T.);+#5047 = LINE('',#5048,#5049);+#5048 = CARTESIAN_POINT('',(3.205,1.125,0.));+#5049 = VECTOR('',#5050,1.);+#5050 = DIRECTION('',(-1.,0.,0.));+#5051 = PLANE('',#5052);+#5052 = AXIS2_PLACEMENT_3D('',#5053,#5054,#5055);+#5053 = CARTESIAN_POINT('',(3.205,0.975,0.));+#5054 = DIRECTION('',(-0.,-0.,-1.)); #5055 = DIRECTION('',(-1.,0.,0.));-#5056 = ORIENTED_EDGE('',*,*,#5057,.T.);-#5057 = EDGE_CURVE('',#5050,#5025,#5058,.T.);-#5058 = LINE('',#5059,#5060);-#5059 = CARTESIAN_POINT('',(2.2,1.125,0.445));-#5060 = VECTOR('',#5061,1.);-#5061 = DIRECTION('',(0.,-1.,0.));-#5062 = PLANE('',#5063);-#5063 = AXIS2_PLACEMENT_3D('',#5064,#5065,#5066);-#5064 = CARTESIAN_POINT('',(2.2,0.975,0.445));-#5065 = DIRECTION('',(-0.,-0.,-1.));-#5066 = DIRECTION('',(-1.,0.,0.));-#5067 = ADVANCED_FACE('',(#5068),#5086,.T.);-#5068 = FACE_BOUND('',#5069,.T.);-#5069 = EDGE_LOOP('',(#5070,#5071,#5072,#5080));-#5070 = ORIENTED_EDGE('',*,*,#4976,.F.);-#5071 = ORIENTED_EDGE('',*,*,#5000,.T.);-#5072 = ORIENTED_EDGE('',*,*,#5073,.T.);-#5073 = EDGE_CURVE('',#5001,#5074,#5076,.T.);-#5074 = VERTEX_POINT('',#5075);-#5075 = CARTESIAN_POINT('',(3.205,1.125,0.15));-#5076 = LINE('',#5077,#5078);-#5077 = CARTESIAN_POINT('',(3.205,0.825,0.15));-#5078 = VECTOR('',#5079,1.);-#5079 = DIRECTION('',(0.,1.,0.));-#5080 = ORIENTED_EDGE('',*,*,#5081,.F.);-#5081 = EDGE_CURVE('',#4977,#5074,#5082,.T.);-#5082 = LINE('',#5083,#5084);-#5083 = CARTESIAN_POINT('',(2.6375,1.125,0.15));-#5084 = VECTOR('',#5085,1.);+#5056 = ADVANCED_FACE('',(#5057),#5082,.T.);+#5057 = FACE_BOUND('',#5058,.T.);+#5058 = EDGE_LOOP('',(#5059,#5069,#5075,#5076));+#5059 = ORIENTED_EDGE('',*,*,#5060,.F.);+#5060 = EDGE_CURVE('',#5061,#5063,#5065,.T.);+#5061 = VERTEX_POINT('',#5062);+#5062 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#5063 = VERTEX_POINT('',#5064);+#5064 = CARTESIAN_POINT('',(3.205,1.125,0.15));+#5065 = LINE('',#5066,#5067);+#5066 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#5067 = VECTOR('',#5068,1.);+#5068 = DIRECTION('',(0.,1.,0.));+#5069 = ORIENTED_EDGE('',*,*,#5070,.T.);+#5070 = EDGE_CURVE('',#5061,#5030,#5071,.T.);+#5071 = LINE('',#5072,#5073);+#5072 = CARTESIAN_POINT('',(3.205,0.825,0.15));+#5073 = VECTOR('',#5074,1.);+#5074 = DIRECTION('',(0.,0.,-1.));+#5075 = ORIENTED_EDGE('',*,*,#5029,.T.);+#5076 = ORIENTED_EDGE('',*,*,#5077,.F.);+#5077 = EDGE_CURVE('',#5063,#5032,#5078,.T.);+#5078 = LINE('',#5079,#5080);+#5079 = CARTESIAN_POINT('',(3.205,1.125,0.15));+#5080 = VECTOR('',#5081,1.);+#5081 = DIRECTION('',(0.,0.,-1.));+#5082 = PLANE('',#5083);+#5083 = AXIS2_PLACEMENT_3D('',#5084,#5085,#5086);+#5084 = CARTESIAN_POINT('',(3.205,0.975,0.15)); #5085 = DIRECTION('',(1.,0.,0.));-#5086 = PLANE('',#5087);-#5087 = AXIS2_PLACEMENT_3D('',#5088,#5089,#5090);-#5088 = CARTESIAN_POINT('',(2.6375,0.975,0.15));-#5089 = DIRECTION('',(-0.,0.,1.));-#5090 = DIRECTION('',(1.,0.,0.));-#5091 = ADVANCED_FACE('',(#5092),#5121,.T.);-#5092 = FACE_BOUND('',#5093,.T.);-#5093 = EDGE_LOOP('',(#5094,#5095,#5096,#5097,#5105,#5113,#5119,#5120));-#5094 = ORIENTED_EDGE('',*,*,#4914,.T.);-#5095 = ORIENTED_EDGE('',*,*,#4984,.T.);-#5096 = ORIENTED_EDGE('',*,*,#5081,.T.);-#5097 = ORIENTED_EDGE('',*,*,#5098,.T.);-#5098 = EDGE_CURVE('',#5074,#5099,#5101,.T.);-#5099 = VERTEX_POINT('',#5100);-#5100 = CARTESIAN_POINT('',(3.205,1.125,0.));-#5101 = LINE('',#5102,#5103);-#5102 = CARTESIAN_POINT('',(3.205,1.125,0.15));-#5103 = VECTOR('',#5104,1.);-#5104 = DIRECTION('',(0.,0.,-1.));-#5105 = ORIENTED_EDGE('',*,*,#5106,.T.);-#5106 = EDGE_CURVE('',#5099,#5107,#5109,.T.);-#5107 = VERTEX_POINT('',#5108);-#5108 = CARTESIAN_POINT('',(2.4875,1.125,0.));+#5086 = DIRECTION('',(0.,0.,-1.));+#5087 = ADVANCED_FACE('',(#5088),#5113,.T.);+#5088 = FACE_BOUND('',#5089,.T.);+#5089 = EDGE_LOOP('',(#5090,#5100,#5106,#5107));+#5090 = ORIENTED_EDGE('',*,*,#5091,.F.);+#5091 = EDGE_CURVE('',#5092,#5094,#5096,.T.);+#5092 = VERTEX_POINT('',#5093);+#5093 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#5094 = VERTEX_POINT('',#5095);+#5095 = CARTESIAN_POINT('',(2.6375,1.125,0.15));+#5096 = LINE('',#5097,#5098);+#5097 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#5098 = VECTOR('',#5099,1.);+#5099 = DIRECTION('',(0.,1.,0.));+#5100 = ORIENTED_EDGE('',*,*,#5101,.T.);+#5101 = EDGE_CURVE('',#5092,#5061,#5102,.T.);+#5102 = LINE('',#5103,#5104);+#5103 = CARTESIAN_POINT('',(2.6375,0.825,0.15));+#5104 = VECTOR('',#5105,1.);+#5105 = DIRECTION('',(1.,0.,0.));+#5106 = ORIENTED_EDGE('',*,*,#5060,.T.);+#5107 = ORIENTED_EDGE('',*,*,#5108,.F.);+#5108 = EDGE_CURVE('',#5094,#5063,#5109,.T.); #5109 = LINE('',#5110,#5111);-#5110 = CARTESIAN_POINT('',(3.205,1.125,0.));+#5110 = CARTESIAN_POINT('',(2.6375,1.125,0.15)); #5111 = VECTOR('',#5112,1.);-#5112 = DIRECTION('',(-1.,0.,0.));-#5113 = ORIENTED_EDGE('',*,*,#5114,.T.);-#5114 = EDGE_CURVE('',#5107,#5050,#5115,.T.);-#5115 = LINE('',#5116,#5117);-#5116 = CARTESIAN_POINT('',(2.4875,1.125,0.));-#5117 = VECTOR('',#5118,1.);-#5118 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5119 = ORIENTED_EDGE('',*,*,#5049,.T.);-#5120 = ORIENTED_EDGE('',*,*,#4945,.T.);-#5121 = PLANE('',#5122);-#5122 = AXIS2_PLACEMENT_3D('',#5123,#5124,#5125);-#5123 = CARTESIAN_POINT('',(2.634182274245,1.125,0.217942023204));-#5124 = DIRECTION('',(0.,1.,0.));-#5125 = DIRECTION('',(0.,-0.,1.));-#5126 = ADVANCED_FACE('',(#5127),#5138,.T.);-#5127 = FACE_BOUND('',#5128,.T.);-#5128 = EDGE_LOOP('',(#5129,#5130,#5131,#5137));-#5129 = ORIENTED_EDGE('',*,*,#5073,.F.);-#5130 = ORIENTED_EDGE('',*,*,#5008,.T.);-#5131 = ORIENTED_EDGE('',*,*,#5132,.T.);-#5132 = EDGE_CURVE('',#5009,#5099,#5133,.T.);-#5133 = LINE('',#5134,#5135);-#5134 = CARTESIAN_POINT('',(3.205,0.825,0.));-#5135 = VECTOR('',#5136,1.);-#5136 = DIRECTION('',(0.,1.,0.));-#5137 = ORIENTED_EDGE('',*,*,#5098,.F.);-#5138 = PLANE('',#5139);-#5139 = AXIS2_PLACEMENT_3D('',#5140,#5141,#5142);-#5140 = CARTESIAN_POINT('',(3.205,0.975,0.15));-#5141 = DIRECTION('',(1.,0.,0.));-#5142 = DIRECTION('',(0.,0.,-1.));-#5143 = ADVANCED_FACE('',(#5144),#5155,.T.);-#5144 = FACE_BOUND('',#5145,.T.);-#5145 = EDGE_LOOP('',(#5146,#5147,#5148,#5154));-#5146 = ORIENTED_EDGE('',*,*,#5132,.F.);-#5147 = ORIENTED_EDGE('',*,*,#5016,.T.);-#5148 = ORIENTED_EDGE('',*,*,#5149,.T.);-#5149 = EDGE_CURVE('',#5017,#5107,#5150,.T.);-#5150 = LINE('',#5151,#5152);-#5151 = CARTESIAN_POINT('',(2.4875,0.825,0.));-#5152 = VECTOR('',#5153,1.);-#5153 = DIRECTION('',(0.,1.,0.));-#5154 = ORIENTED_EDGE('',*,*,#5106,.F.);-#5155 = PLANE('',#5156);-#5156 = AXIS2_PLACEMENT_3D('',#5157,#5158,#5159);-#5157 = CARTESIAN_POINT('',(3.205,0.975,0.));-#5158 = DIRECTION('',(-0.,-0.,-1.));-#5159 = DIRECTION('',(-1.,0.,0.));-#5160 = ADVANCED_FACE('',(#5161),#5167,.T.);-#5161 = FACE_BOUND('',#5162,.T.);-#5162 = EDGE_LOOP('',(#5163,#5164,#5165,#5166));-#5163 = ORIENTED_EDGE('',*,*,#5149,.F.);-#5164 = ORIENTED_EDGE('',*,*,#5024,.T.);-#5165 = ORIENTED_EDGE('',*,*,#5057,.F.);-#5166 = ORIENTED_EDGE('',*,*,#5114,.F.);+#5112 = DIRECTION('',(1.,0.,0.));+#5113 = PLANE('',#5114);+#5114 = AXIS2_PLACEMENT_3D('',#5115,#5116,#5117);+#5115 = CARTESIAN_POINT('',(2.6375,0.975,0.15));+#5116 = DIRECTION('',(-0.,0.,1.));+#5117 = DIRECTION('',(1.,0.,0.));+#5118 = ADVANCED_FACE('',(#5119),#5134,.T.);+#5119 = FACE_BOUND('',#5120,.T.);+#5120 = EDGE_LOOP('',(#5121,#5122,#5128,#5129,#5130,#5131,#5132,#5133));+#5121 = ORIENTED_EDGE('',*,*,#4914,.T.);+#5122 = ORIENTED_EDGE('',*,*,#5123,.T.);+#5123 = EDGE_CURVE('',#4907,#5094,#5124,.T.);+#5124 = LINE('',#5125,#5126);+#5125 = CARTESIAN_POINT('',(2.35,1.125,0.595));+#5126 = VECTOR('',#5127,1.);+#5127 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5128 = ORIENTED_EDGE('',*,*,#5108,.T.);+#5129 = ORIENTED_EDGE('',*,*,#5077,.T.);+#5130 = ORIENTED_EDGE('',*,*,#5046,.T.);+#5131 = ORIENTED_EDGE('',*,*,#5015,.T.);+#5132 = ORIENTED_EDGE('',*,*,#4976,.T.);+#5133 = ORIENTED_EDGE('',*,*,#4945,.T.);+#5134 = PLANE('',#5135);+#5135 = AXIS2_PLACEMENT_3D('',#5136,#5137,#5138);+#5136 = CARTESIAN_POINT('',(2.634182274245,1.125,0.217942023204));+#5137 = DIRECTION('',(0.,1.,0.));+#5138 = DIRECTION('',(0.,-0.,1.));+#5139 = ADVANCED_FACE('',(#5140),#5151,.T.);+#5140 = FACE_BOUND('',#5141,.T.);+#5141 = EDGE_LOOP('',(#5142,#5143,#5149,#5150));+#5142 = ORIENTED_EDGE('',*,*,#4906,.F.);+#5143 = ORIENTED_EDGE('',*,*,#5144,.T.);+#5144 = EDGE_CURVE('',#4899,#5092,#5145,.T.);+#5145 = LINE('',#5146,#5147);+#5146 = CARTESIAN_POINT('',(2.35,0.825,0.595));+#5147 = VECTOR('',#5148,1.);+#5148 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5149 = ORIENTED_EDGE('',*,*,#5091,.T.);+#5150 = ORIENTED_EDGE('',*,*,#5123,.F.);+#5151 = PLANE('',#5152);+#5152 = AXIS2_PLACEMENT_3D('',#5153,#5154,#5155);+#5153 = CARTESIAN_POINT('',(2.35,0.975,0.595));+#5154 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#5155 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5156 = ADVANCED_FACE('',(#5157),#5167,.F.);+#5157 = FACE_BOUND('',#5158,.F.);+#5158 = EDGE_LOOP('',(#5159,#5160,#5161,#5162,#5163,#5164,#5165,#5166));+#5159 = ORIENTED_EDGE('',*,*,#4896,.T.);+#5160 = ORIENTED_EDGE('',*,*,#5144,.T.);+#5161 = ORIENTED_EDGE('',*,*,#5101,.T.);+#5162 = ORIENTED_EDGE('',*,*,#5070,.T.);+#5163 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5164 = ORIENTED_EDGE('',*,*,#5008,.T.);+#5165 = ORIENTED_EDGE('',*,*,#4967,.T.);+#5166 = ORIENTED_EDGE('',*,*,#4936,.T.); #5167 = PLANE('',#5168); #5168 = AXIS2_PLACEMENT_3D('',#5169,#5170,#5171);-#5169 = CARTESIAN_POINT('',(2.4875,0.975,0.));-#5170 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#5171 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5169 = CARTESIAN_POINT('',(2.634182274245,0.825,0.217942023204));+#5170 = DIRECTION('',(0.,1.,0.));+#5171 = DIRECTION('',(0.,-0.,1.)); #5172 = MANIFOLD_SOLID_BREP('',#5173);-#5173 = CLOSED_SHELL('',(#5174,#5214,#5245,#5276,#5325,#5349,#5373,#5408- ,#5425,#5442));+#5173 = CLOSED_SHELL('',(#5174,#5214,#5245,#5276,#5307,#5338,#5369,#5400+ ,#5421,#5438)); #5174 = ADVANCED_FACE('',(#5175),#5209,.T.); #5175 = FACE_BOUND('',#5176,.T.); #5176 = EDGE_LOOP('',(#5177,#5187,#5195,#5203));@@ -5296,216 +5296,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #5244 = DIRECTION('',(0.,0.,1.)); #5245 = ADVANCED_FACE('',(#5246),#5271,.T.); #5246 = FACE_BOUND('',#5247,.T.);-#5247 = EDGE_LOOP('',(#5248,#5249,#5257,#5265));-#5248 = ORIENTED_EDGE('',*,*,#5188,.F.);-#5249 = ORIENTED_EDGE('',*,*,#5250,.T.);-#5250 = EDGE_CURVE('',#5181,#5251,#5253,.T.);-#5251 = VERTEX_POINT('',#5252);-#5252 = CARTESIAN_POINT('',(2.6375,1.475,0.15));-#5253 = LINE('',#5254,#5255);-#5254 = CARTESIAN_POINT('',(2.35,1.475,0.595));-#5255 = VECTOR('',#5256,1.);-#5256 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5257 = ORIENTED_EDGE('',*,*,#5258,.T.);-#5258 = EDGE_CURVE('',#5251,#5259,#5261,.T.);+#5247 = EDGE_LOOP('',(#5248,#5256,#5257,#5265));+#5248 = ORIENTED_EDGE('',*,*,#5249,.T.);+#5249 = EDGE_CURVE('',#5250,#5219,#5252,.T.);+#5250 = VERTEX_POINT('',#5251);+#5251 = CARTESIAN_POINT('',(2.2,1.475,0.445));+#5252 = LINE('',#5253,#5254);+#5253 = CARTESIAN_POINT('',(2.2,1.475,0.445));+#5254 = VECTOR('',#5255,1.);+#5255 = DIRECTION('',(-1.,0.,0.));+#5256 = ORIENTED_EDGE('',*,*,#5235,.F.);+#5257 = ORIENTED_EDGE('',*,*,#5258,.F.);+#5258 = EDGE_CURVE('',#5259,#5228,#5261,.T.); #5259 = VERTEX_POINT('',#5260);-#5260 = CARTESIAN_POINT('',(2.6375,1.775,0.15));+#5260 = CARTESIAN_POINT('',(2.2,1.775,0.445)); #5261 = LINE('',#5262,#5263);-#5262 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#5262 = CARTESIAN_POINT('',(2.2,1.775,0.445)); #5263 = VECTOR('',#5264,1.);-#5264 = DIRECTION('',(0.,1.,0.));-#5265 = ORIENTED_EDGE('',*,*,#5266,.F.);-#5266 = EDGE_CURVE('',#5189,#5259,#5267,.T.);+#5264 = DIRECTION('',(-1.,0.,0.));+#5265 = ORIENTED_EDGE('',*,*,#5266,.T.);+#5266 = EDGE_CURVE('',#5259,#5250,#5267,.T.); #5267 = LINE('',#5268,#5269);-#5268 = CARTESIAN_POINT('',(2.35,1.775,0.595));+#5268 = CARTESIAN_POINT('',(2.2,1.775,0.445)); #5269 = VECTOR('',#5270,1.);-#5270 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5270 = DIRECTION('',(0.,-1.,0.)); #5271 = PLANE('',#5272); #5272 = AXIS2_PLACEMENT_3D('',#5273,#5274,#5275);-#5273 = CARTESIAN_POINT('',(2.35,1.625,0.595));-#5274 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#5275 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5276 = ADVANCED_FACE('',(#5277),#5320,.F.);-#5277 = FACE_BOUND('',#5278,.F.);-#5278 = EDGE_LOOP('',(#5279,#5280,#5281,#5289,#5297,#5305,#5313,#5319));-#5279 = ORIENTED_EDGE('',*,*,#5178,.T.);-#5280 = ORIENTED_EDGE('',*,*,#5250,.T.);-#5281 = ORIENTED_EDGE('',*,*,#5282,.T.);-#5282 = EDGE_CURVE('',#5251,#5283,#5285,.T.);+#5273 = CARTESIAN_POINT('',(2.2,1.625,0.445));+#5274 = DIRECTION('',(-0.,-0.,-1.));+#5275 = DIRECTION('',(-1.,0.,0.));+#5276 = ADVANCED_FACE('',(#5277),#5302,.T.);+#5277 = FACE_BOUND('',#5278,.T.);+#5278 = EDGE_LOOP('',(#5279,#5289,#5295,#5296));+#5279 = ORIENTED_EDGE('',*,*,#5280,.F.);+#5280 = EDGE_CURVE('',#5281,#5283,#5285,.T.);+#5281 = VERTEX_POINT('',#5282);+#5282 = CARTESIAN_POINT('',(2.4875,1.475,0.)); #5283 = VERTEX_POINT('',#5284);-#5284 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#5284 = CARTESIAN_POINT('',(2.4875,1.775,0.)); #5285 = LINE('',#5286,#5287);-#5286 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#5286 = CARTESIAN_POINT('',(2.4875,1.475,0.)); #5287 = VECTOR('',#5288,1.);-#5288 = DIRECTION('',(1.,0.,0.));+#5288 = DIRECTION('',(0.,1.,0.)); #5289 = ORIENTED_EDGE('',*,*,#5290,.T.);-#5290 = EDGE_CURVE('',#5283,#5291,#5293,.T.);-#5291 = VERTEX_POINT('',#5292);-#5292 = CARTESIAN_POINT('',(3.205,1.475,0.));-#5293 = LINE('',#5294,#5295);-#5294 = CARTESIAN_POINT('',(3.205,1.475,0.15));-#5295 = VECTOR('',#5296,1.);-#5296 = DIRECTION('',(0.,0.,-1.));-#5297 = ORIENTED_EDGE('',*,*,#5298,.T.);-#5298 = EDGE_CURVE('',#5291,#5299,#5301,.T.);-#5299 = VERTEX_POINT('',#5300);-#5300 = CARTESIAN_POINT('',(2.4875,1.475,0.));-#5301 = LINE('',#5302,#5303);-#5302 = CARTESIAN_POINT('',(3.205,1.475,0.));-#5303 = VECTOR('',#5304,1.);-#5304 = DIRECTION('',(-1.,0.,0.));-#5305 = ORIENTED_EDGE('',*,*,#5306,.T.);-#5306 = EDGE_CURVE('',#5299,#5307,#5309,.T.);-#5307 = VERTEX_POINT('',#5308);-#5308 = CARTESIAN_POINT('',(2.2,1.475,0.445));-#5309 = LINE('',#5310,#5311);-#5310 = CARTESIAN_POINT('',(2.4875,1.475,0.));-#5311 = VECTOR('',#5312,1.);-#5312 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5313 = ORIENTED_EDGE('',*,*,#5314,.T.);-#5314 = EDGE_CURVE('',#5307,#5219,#5315,.T.);-#5315 = LINE('',#5316,#5317);-#5316 = CARTESIAN_POINT('',(2.2,1.475,0.445));-#5317 = VECTOR('',#5318,1.);-#5318 = DIRECTION('',(-1.,0.,0.));-#5319 = ORIENTED_EDGE('',*,*,#5218,.T.);-#5320 = PLANE('',#5321);-#5321 = AXIS2_PLACEMENT_3D('',#5322,#5323,#5324);-#5322 = CARTESIAN_POINT('',(2.634182274245,1.475,0.217942023204));-#5323 = DIRECTION('',(0.,1.,0.));-#5324 = DIRECTION('',(0.,-0.,1.));-#5325 = ADVANCED_FACE('',(#5326),#5344,.T.);-#5326 = FACE_BOUND('',#5327,.T.);-#5327 = EDGE_LOOP('',(#5328,#5329,#5330,#5338));-#5328 = ORIENTED_EDGE('',*,*,#5314,.T.);-#5329 = ORIENTED_EDGE('',*,*,#5235,.F.);-#5330 = ORIENTED_EDGE('',*,*,#5331,.F.);-#5331 = EDGE_CURVE('',#5332,#5228,#5334,.T.);-#5332 = VERTEX_POINT('',#5333);-#5333 = CARTESIAN_POINT('',(2.2,1.775,0.445));-#5334 = LINE('',#5335,#5336);-#5335 = CARTESIAN_POINT('',(2.2,1.775,0.445));-#5336 = VECTOR('',#5337,1.);+#5290 = EDGE_CURVE('',#5281,#5250,#5291,.T.);+#5291 = LINE('',#5292,#5293);+#5292 = CARTESIAN_POINT('',(2.4875,1.475,0.));+#5293 = VECTOR('',#5294,1.);+#5294 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5295 = ORIENTED_EDGE('',*,*,#5266,.F.);+#5296 = ORIENTED_EDGE('',*,*,#5297,.F.);+#5297 = EDGE_CURVE('',#5283,#5259,#5298,.T.);+#5298 = LINE('',#5299,#5300);+#5299 = CARTESIAN_POINT('',(2.4875,1.775,0.));+#5300 = VECTOR('',#5301,1.);+#5301 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5302 = PLANE('',#5303);+#5303 = AXIS2_PLACEMENT_3D('',#5304,#5305,#5306);+#5304 = CARTESIAN_POINT('',(2.4875,1.625,0.));+#5305 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#5306 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5307 = ADVANCED_FACE('',(#5308),#5333,.T.);+#5308 = FACE_BOUND('',#5309,.T.);+#5309 = EDGE_LOOP('',(#5310,#5320,#5326,#5327));+#5310 = ORIENTED_EDGE('',*,*,#5311,.F.);+#5311 = EDGE_CURVE('',#5312,#5314,#5316,.T.);+#5312 = VERTEX_POINT('',#5313);+#5313 = CARTESIAN_POINT('',(3.205,1.475,0.));+#5314 = VERTEX_POINT('',#5315);+#5315 = CARTESIAN_POINT('',(3.205,1.775,0.));+#5316 = LINE('',#5317,#5318);+#5317 = CARTESIAN_POINT('',(3.205,1.475,0.));+#5318 = VECTOR('',#5319,1.);+#5319 = DIRECTION('',(0.,1.,0.));+#5320 = ORIENTED_EDGE('',*,*,#5321,.T.);+#5321 = EDGE_CURVE('',#5312,#5281,#5322,.T.);+#5322 = LINE('',#5323,#5324);+#5323 = CARTESIAN_POINT('',(3.205,1.475,0.));+#5324 = VECTOR('',#5325,1.);+#5325 = DIRECTION('',(-1.,0.,0.));+#5326 = ORIENTED_EDGE('',*,*,#5280,.T.);+#5327 = ORIENTED_EDGE('',*,*,#5328,.F.);+#5328 = EDGE_CURVE('',#5314,#5283,#5329,.T.);+#5329 = LINE('',#5330,#5331);+#5330 = CARTESIAN_POINT('',(3.205,1.775,0.));+#5331 = VECTOR('',#5332,1.);+#5332 = DIRECTION('',(-1.,0.,0.));+#5333 = PLANE('',#5334);+#5334 = AXIS2_PLACEMENT_3D('',#5335,#5336,#5337);+#5335 = CARTESIAN_POINT('',(3.205,1.625,0.));+#5336 = DIRECTION('',(-0.,-0.,-1.)); #5337 = DIRECTION('',(-1.,0.,0.));-#5338 = ORIENTED_EDGE('',*,*,#5339,.T.);-#5339 = EDGE_CURVE('',#5332,#5307,#5340,.T.);-#5340 = LINE('',#5341,#5342);-#5341 = CARTESIAN_POINT('',(2.2,1.775,0.445));-#5342 = VECTOR('',#5343,1.);-#5343 = DIRECTION('',(0.,-1.,0.));-#5344 = PLANE('',#5345);-#5345 = AXIS2_PLACEMENT_3D('',#5346,#5347,#5348);-#5346 = CARTESIAN_POINT('',(2.2,1.625,0.445));-#5347 = DIRECTION('',(-0.,-0.,-1.));-#5348 = DIRECTION('',(-1.,0.,0.));-#5349 = ADVANCED_FACE('',(#5350),#5368,.T.);-#5350 = FACE_BOUND('',#5351,.T.);-#5351 = EDGE_LOOP('',(#5352,#5353,#5354,#5362));-#5352 = ORIENTED_EDGE('',*,*,#5258,.F.);-#5353 = ORIENTED_EDGE('',*,*,#5282,.T.);-#5354 = ORIENTED_EDGE('',*,*,#5355,.T.);-#5355 = EDGE_CURVE('',#5283,#5356,#5358,.T.);-#5356 = VERTEX_POINT('',#5357);-#5357 = CARTESIAN_POINT('',(3.205,1.775,0.15));-#5358 = LINE('',#5359,#5360);-#5359 = CARTESIAN_POINT('',(3.205,1.475,0.15));-#5360 = VECTOR('',#5361,1.);-#5361 = DIRECTION('',(0.,1.,0.));-#5362 = ORIENTED_EDGE('',*,*,#5363,.F.);-#5363 = EDGE_CURVE('',#5259,#5356,#5364,.T.);-#5364 = LINE('',#5365,#5366);-#5365 = CARTESIAN_POINT('',(2.6375,1.775,0.15));-#5366 = VECTOR('',#5367,1.);+#5338 = ADVANCED_FACE('',(#5339),#5364,.T.);+#5339 = FACE_BOUND('',#5340,.T.);+#5340 = EDGE_LOOP('',(#5341,#5351,#5357,#5358));+#5341 = ORIENTED_EDGE('',*,*,#5342,.F.);+#5342 = EDGE_CURVE('',#5343,#5345,#5347,.T.);+#5343 = VERTEX_POINT('',#5344);+#5344 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#5345 = VERTEX_POINT('',#5346);+#5346 = CARTESIAN_POINT('',(3.205,1.775,0.15));+#5347 = LINE('',#5348,#5349);+#5348 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#5349 = VECTOR('',#5350,1.);+#5350 = DIRECTION('',(0.,1.,0.));+#5351 = ORIENTED_EDGE('',*,*,#5352,.T.);+#5352 = EDGE_CURVE('',#5343,#5312,#5353,.T.);+#5353 = LINE('',#5354,#5355);+#5354 = CARTESIAN_POINT('',(3.205,1.475,0.15));+#5355 = VECTOR('',#5356,1.);+#5356 = DIRECTION('',(0.,0.,-1.));+#5357 = ORIENTED_EDGE('',*,*,#5311,.T.);+#5358 = ORIENTED_EDGE('',*,*,#5359,.F.);+#5359 = EDGE_CURVE('',#5345,#5314,#5360,.T.);+#5360 = LINE('',#5361,#5362);+#5361 = CARTESIAN_POINT('',(3.205,1.775,0.15));+#5362 = VECTOR('',#5363,1.);+#5363 = DIRECTION('',(0.,0.,-1.));+#5364 = PLANE('',#5365);+#5365 = AXIS2_PLACEMENT_3D('',#5366,#5367,#5368);+#5366 = CARTESIAN_POINT('',(3.205,1.625,0.15)); #5367 = DIRECTION('',(1.,0.,0.));-#5368 = PLANE('',#5369);-#5369 = AXIS2_PLACEMENT_3D('',#5370,#5371,#5372);-#5370 = CARTESIAN_POINT('',(2.6375,1.625,0.15));-#5371 = DIRECTION('',(-0.,0.,1.));-#5372 = DIRECTION('',(1.,0.,0.));-#5373 = ADVANCED_FACE('',(#5374),#5403,.T.);-#5374 = FACE_BOUND('',#5375,.T.);-#5375 = EDGE_LOOP('',(#5376,#5377,#5378,#5379,#5387,#5395,#5401,#5402));-#5376 = ORIENTED_EDGE('',*,*,#5196,.T.);-#5377 = ORIENTED_EDGE('',*,*,#5266,.T.);-#5378 = ORIENTED_EDGE('',*,*,#5363,.T.);-#5379 = ORIENTED_EDGE('',*,*,#5380,.T.);-#5380 = EDGE_CURVE('',#5356,#5381,#5383,.T.);-#5381 = VERTEX_POINT('',#5382);-#5382 = CARTESIAN_POINT('',(3.205,1.775,0.));-#5383 = LINE('',#5384,#5385);-#5384 = CARTESIAN_POINT('',(3.205,1.775,0.15));-#5385 = VECTOR('',#5386,1.);-#5386 = DIRECTION('',(0.,0.,-1.));-#5387 = ORIENTED_EDGE('',*,*,#5388,.T.);-#5388 = EDGE_CURVE('',#5381,#5389,#5391,.T.);-#5389 = VERTEX_POINT('',#5390);-#5390 = CARTESIAN_POINT('',(2.4875,1.775,0.));+#5368 = DIRECTION('',(0.,0.,-1.));+#5369 = ADVANCED_FACE('',(#5370),#5395,.T.);+#5370 = FACE_BOUND('',#5371,.T.);+#5371 = EDGE_LOOP('',(#5372,#5382,#5388,#5389));+#5372 = ORIENTED_EDGE('',*,*,#5373,.F.);+#5373 = EDGE_CURVE('',#5374,#5376,#5378,.T.);+#5374 = VERTEX_POINT('',#5375);+#5375 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#5376 = VERTEX_POINT('',#5377);+#5377 = CARTESIAN_POINT('',(2.6375,1.775,0.15));+#5378 = LINE('',#5379,#5380);+#5379 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#5380 = VECTOR('',#5381,1.);+#5381 = DIRECTION('',(0.,1.,0.));+#5382 = ORIENTED_EDGE('',*,*,#5383,.T.);+#5383 = EDGE_CURVE('',#5374,#5343,#5384,.T.);+#5384 = LINE('',#5385,#5386);+#5385 = CARTESIAN_POINT('',(2.6375,1.475,0.15));+#5386 = VECTOR('',#5387,1.);+#5387 = DIRECTION('',(1.,0.,0.));+#5388 = ORIENTED_EDGE('',*,*,#5342,.T.);+#5389 = ORIENTED_EDGE('',*,*,#5390,.F.);+#5390 = EDGE_CURVE('',#5376,#5345,#5391,.T.); #5391 = LINE('',#5392,#5393);-#5392 = CARTESIAN_POINT('',(3.205,1.775,0.));+#5392 = CARTESIAN_POINT('',(2.6375,1.775,0.15)); #5393 = VECTOR('',#5394,1.);-#5394 = DIRECTION('',(-1.,0.,0.));-#5395 = ORIENTED_EDGE('',*,*,#5396,.T.);-#5396 = EDGE_CURVE('',#5389,#5332,#5397,.T.);-#5397 = LINE('',#5398,#5399);-#5398 = CARTESIAN_POINT('',(2.4875,1.775,0.));-#5399 = VECTOR('',#5400,1.);-#5400 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5401 = ORIENTED_EDGE('',*,*,#5331,.T.);-#5402 = ORIENTED_EDGE('',*,*,#5227,.T.);-#5403 = PLANE('',#5404);-#5404 = AXIS2_PLACEMENT_3D('',#5405,#5406,#5407);-#5405 = CARTESIAN_POINT('',(2.634182274245,1.775,0.217942023204));-#5406 = DIRECTION('',(0.,1.,0.));-#5407 = DIRECTION('',(0.,-0.,1.));-#5408 = ADVANCED_FACE('',(#5409),#5420,.T.);-#5409 = FACE_BOUND('',#5410,.T.);-#5410 = EDGE_LOOP('',(#5411,#5412,#5413,#5419));-#5411 = ORIENTED_EDGE('',*,*,#5355,.F.);-#5412 = ORIENTED_EDGE('',*,*,#5290,.T.);-#5413 = ORIENTED_EDGE('',*,*,#5414,.T.);-#5414 = EDGE_CURVE('',#5291,#5381,#5415,.T.);-#5415 = LINE('',#5416,#5417);-#5416 = CARTESIAN_POINT('',(3.205,1.475,0.));-#5417 = VECTOR('',#5418,1.);-#5418 = DIRECTION('',(0.,1.,0.));-#5419 = ORIENTED_EDGE('',*,*,#5380,.F.);-#5420 = PLANE('',#5421);-#5421 = AXIS2_PLACEMENT_3D('',#5422,#5423,#5424);-#5422 = CARTESIAN_POINT('',(3.205,1.625,0.15));-#5423 = DIRECTION('',(1.,0.,0.));-#5424 = DIRECTION('',(0.,0.,-1.));-#5425 = ADVANCED_FACE('',(#5426),#5437,.T.);-#5426 = FACE_BOUND('',#5427,.T.);-#5427 = EDGE_LOOP('',(#5428,#5429,#5430,#5436));-#5428 = ORIENTED_EDGE('',*,*,#5414,.F.);-#5429 = ORIENTED_EDGE('',*,*,#5298,.T.);-#5430 = ORIENTED_EDGE('',*,*,#5431,.T.);-#5431 = EDGE_CURVE('',#5299,#5389,#5432,.T.);-#5432 = LINE('',#5433,#5434);-#5433 = CARTESIAN_POINT('',(2.4875,1.475,0.));-#5434 = VECTOR('',#5435,1.);-#5435 = DIRECTION('',(0.,1.,0.));-#5436 = ORIENTED_EDGE('',*,*,#5388,.F.);-#5437 = PLANE('',#5438);-#5438 = AXIS2_PLACEMENT_3D('',#5439,#5440,#5441);-#5439 = CARTESIAN_POINT('',(3.205,1.625,0.));-#5440 = DIRECTION('',(-0.,-0.,-1.));-#5441 = DIRECTION('',(-1.,0.,0.));-#5442 = ADVANCED_FACE('',(#5443),#5449,.T.);-#5443 = FACE_BOUND('',#5444,.T.);-#5444 = EDGE_LOOP('',(#5445,#5446,#5447,#5448));-#5445 = ORIENTED_EDGE('',*,*,#5431,.F.);-#5446 = ORIENTED_EDGE('',*,*,#5306,.T.);-#5447 = ORIENTED_EDGE('',*,*,#5339,.F.);-#5448 = ORIENTED_EDGE('',*,*,#5396,.F.);+#5394 = DIRECTION('',(1.,0.,0.));+#5395 = PLANE('',#5396);+#5396 = AXIS2_PLACEMENT_3D('',#5397,#5398,#5399);+#5397 = CARTESIAN_POINT('',(2.6375,1.625,0.15));+#5398 = DIRECTION('',(-0.,0.,1.));+#5399 = DIRECTION('',(1.,0.,0.));+#5400 = ADVANCED_FACE('',(#5401),#5416,.T.);+#5401 = FACE_BOUND('',#5402,.T.);+#5402 = EDGE_LOOP('',(#5403,#5404,#5410,#5411,#5412,#5413,#5414,#5415));+#5403 = ORIENTED_EDGE('',*,*,#5196,.T.);+#5404 = ORIENTED_EDGE('',*,*,#5405,.T.);+#5405 = EDGE_CURVE('',#5189,#5376,#5406,.T.);+#5406 = LINE('',#5407,#5408);+#5407 = CARTESIAN_POINT('',(2.35,1.775,0.595));+#5408 = VECTOR('',#5409,1.);+#5409 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5410 = ORIENTED_EDGE('',*,*,#5390,.T.);+#5411 = ORIENTED_EDGE('',*,*,#5359,.T.);+#5412 = ORIENTED_EDGE('',*,*,#5328,.T.);+#5413 = ORIENTED_EDGE('',*,*,#5297,.T.);+#5414 = ORIENTED_EDGE('',*,*,#5258,.T.);+#5415 = ORIENTED_EDGE('',*,*,#5227,.T.);+#5416 = PLANE('',#5417);+#5417 = AXIS2_PLACEMENT_3D('',#5418,#5419,#5420);+#5418 = CARTESIAN_POINT('',(2.634182274245,1.775,0.217942023204));+#5419 = DIRECTION('',(0.,1.,0.));+#5420 = DIRECTION('',(0.,-0.,1.));+#5421 = ADVANCED_FACE('',(#5422),#5433,.T.);+#5422 = FACE_BOUND('',#5423,.T.);+#5423 = EDGE_LOOP('',(#5424,#5425,#5431,#5432));+#5424 = ORIENTED_EDGE('',*,*,#5188,.F.);+#5425 = ORIENTED_EDGE('',*,*,#5426,.T.);+#5426 = EDGE_CURVE('',#5181,#5374,#5427,.T.);+#5427 = LINE('',#5428,#5429);+#5428 = CARTESIAN_POINT('',(2.35,1.475,0.595));+#5429 = VECTOR('',#5430,1.);+#5430 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5431 = ORIENTED_EDGE('',*,*,#5373,.T.);+#5432 = ORIENTED_EDGE('',*,*,#5405,.F.);+#5433 = PLANE('',#5434);+#5434 = AXIS2_PLACEMENT_3D('',#5435,#5436,#5437);+#5435 = CARTESIAN_POINT('',(2.35,1.625,0.595));+#5436 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#5437 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5438 = ADVANCED_FACE('',(#5439),#5449,.F.);+#5439 = FACE_BOUND('',#5440,.F.);+#5440 = EDGE_LOOP('',(#5441,#5442,#5443,#5444,#5445,#5446,#5447,#5448));+#5441 = ORIENTED_EDGE('',*,*,#5178,.T.);+#5442 = ORIENTED_EDGE('',*,*,#5426,.T.);+#5443 = ORIENTED_EDGE('',*,*,#5383,.T.);+#5444 = ORIENTED_EDGE('',*,*,#5352,.T.);+#5445 = ORIENTED_EDGE('',*,*,#5321,.T.);+#5446 = ORIENTED_EDGE('',*,*,#5290,.T.);+#5447 = ORIENTED_EDGE('',*,*,#5249,.T.);+#5448 = ORIENTED_EDGE('',*,*,#5218,.T.); #5449 = PLANE('',#5450); #5450 = AXIS2_PLACEMENT_3D('',#5451,#5452,#5453);-#5451 = CARTESIAN_POINT('',(2.4875,1.625,0.));-#5452 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#5453 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5451 = CARTESIAN_POINT('',(2.634182274245,1.475,0.217942023204));+#5452 = DIRECTION('',(0.,1.,0.));+#5453 = DIRECTION('',(0.,-0.,1.)); #5454 = MANIFOLD_SOLID_BREP('',#5455);-#5455 = CLOSED_SHELL('',(#5456,#5496,#5527,#5558,#5607,#5631,#5655,#5690- ,#5707,#5724));+#5455 = CLOSED_SHELL('',(#5456,#5496,#5527,#5558,#5589,#5620,#5651,#5682+ ,#5703,#5720)); #5456 = ADVANCED_FACE('',(#5457),#5491,.T.); #5457 = FACE_BOUND('',#5458,.T.); #5458 = EDGE_LOOP('',(#5459,#5469,#5477,#5485));@@ -5579,216 +5579,216 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #5526 = DIRECTION('',(0.,0.,1.)); #5527 = ADVANCED_FACE('',(#5528),#5553,.T.); #5528 = FACE_BOUND('',#5529,.T.);-#5529 = EDGE_LOOP('',(#5530,#5531,#5539,#5547));-#5530 = ORIENTED_EDGE('',*,*,#5470,.F.);-#5531 = ORIENTED_EDGE('',*,*,#5532,.T.);-#5532 = EDGE_CURVE('',#5463,#5533,#5535,.T.);-#5533 = VERTEX_POINT('',#5534);-#5534 = CARTESIAN_POINT('',(2.6375,2.125,0.15));-#5535 = LINE('',#5536,#5537);-#5536 = CARTESIAN_POINT('',(2.35,2.125,0.595));-#5537 = VECTOR('',#5538,1.);-#5538 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5539 = ORIENTED_EDGE('',*,*,#5540,.T.);-#5540 = EDGE_CURVE('',#5533,#5541,#5543,.T.);+#5529 = EDGE_LOOP('',(#5530,#5538,#5539,#5547));+#5530 = ORIENTED_EDGE('',*,*,#5531,.T.);+#5531 = EDGE_CURVE('',#5532,#5501,#5534,.T.);+#5532 = VERTEX_POINT('',#5533);+#5533 = CARTESIAN_POINT('',(2.2,2.125,0.445));+#5534 = LINE('',#5535,#5536);+#5535 = CARTESIAN_POINT('',(2.2,2.125,0.445));+#5536 = VECTOR('',#5537,1.);+#5537 = DIRECTION('',(-1.,0.,0.));+#5538 = ORIENTED_EDGE('',*,*,#5517,.F.);+#5539 = ORIENTED_EDGE('',*,*,#5540,.F.);+#5540 = EDGE_CURVE('',#5541,#5510,#5543,.T.); #5541 = VERTEX_POINT('',#5542);-#5542 = CARTESIAN_POINT('',(2.6375,2.425,0.15));+#5542 = CARTESIAN_POINT('',(2.2,2.425,0.445)); #5543 = LINE('',#5544,#5545);-#5544 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#5544 = CARTESIAN_POINT('',(2.2,2.425,0.445)); #5545 = VECTOR('',#5546,1.);-#5546 = DIRECTION('',(0.,1.,0.));-#5547 = ORIENTED_EDGE('',*,*,#5548,.F.);-#5548 = EDGE_CURVE('',#5471,#5541,#5549,.T.);+#5546 = DIRECTION('',(-1.,0.,0.));+#5547 = ORIENTED_EDGE('',*,*,#5548,.T.);+#5548 = EDGE_CURVE('',#5541,#5532,#5549,.T.); #5549 = LINE('',#5550,#5551);-#5550 = CARTESIAN_POINT('',(2.35,2.425,0.595));+#5550 = CARTESIAN_POINT('',(2.2,2.425,0.445)); #5551 = VECTOR('',#5552,1.);-#5552 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5552 = DIRECTION('',(0.,-1.,0.)); #5553 = PLANE('',#5554); #5554 = AXIS2_PLACEMENT_3D('',#5555,#5556,#5557);-#5555 = CARTESIAN_POINT('',(2.35,2.275,0.595));-#5556 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#5557 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5558 = ADVANCED_FACE('',(#5559),#5602,.F.);-#5559 = FACE_BOUND('',#5560,.F.);-#5560 = EDGE_LOOP('',(#5561,#5562,#5563,#5571,#5579,#5587,#5595,#5601));-#5561 = ORIENTED_EDGE('',*,*,#5460,.T.);-#5562 = ORIENTED_EDGE('',*,*,#5532,.T.);-#5563 = ORIENTED_EDGE('',*,*,#5564,.T.);-#5564 = EDGE_CURVE('',#5533,#5565,#5567,.T.);+#5555 = CARTESIAN_POINT('',(2.2,2.275,0.445));+#5556 = DIRECTION('',(-0.,-0.,-1.));+#5557 = DIRECTION('',(-1.,0.,0.));+#5558 = ADVANCED_FACE('',(#5559),#5584,.T.);+#5559 = FACE_BOUND('',#5560,.T.);+#5560 = EDGE_LOOP('',(#5561,#5571,#5577,#5578));+#5561 = ORIENTED_EDGE('',*,*,#5562,.F.);+#5562 = EDGE_CURVE('',#5563,#5565,#5567,.T.);+#5563 = VERTEX_POINT('',#5564);+#5564 = CARTESIAN_POINT('',(2.4875,2.125,0.)); #5565 = VERTEX_POINT('',#5566);-#5566 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#5566 = CARTESIAN_POINT('',(2.4875,2.425,0.)); #5567 = LINE('',#5568,#5569);-#5568 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#5568 = CARTESIAN_POINT('',(2.4875,2.125,0.)); #5569 = VECTOR('',#5570,1.);-#5570 = DIRECTION('',(1.,0.,0.));+#5570 = DIRECTION('',(0.,1.,0.)); #5571 = ORIENTED_EDGE('',*,*,#5572,.T.);-#5572 = EDGE_CURVE('',#5565,#5573,#5575,.T.);-#5573 = VERTEX_POINT('',#5574);-#5574 = CARTESIAN_POINT('',(3.205,2.125,0.));-#5575 = LINE('',#5576,#5577);-#5576 = CARTESIAN_POINT('',(3.205,2.125,0.15));-#5577 = VECTOR('',#5578,1.);-#5578 = DIRECTION('',(0.,0.,-1.));-#5579 = ORIENTED_EDGE('',*,*,#5580,.T.);-#5580 = EDGE_CURVE('',#5573,#5581,#5583,.T.);-#5581 = VERTEX_POINT('',#5582);-#5582 = CARTESIAN_POINT('',(2.4875,2.125,0.));-#5583 = LINE('',#5584,#5585);-#5584 = CARTESIAN_POINT('',(3.205,2.125,0.));-#5585 = VECTOR('',#5586,1.);-#5586 = DIRECTION('',(-1.,0.,0.));-#5587 = ORIENTED_EDGE('',*,*,#5588,.T.);-#5588 = EDGE_CURVE('',#5581,#5589,#5591,.T.);-#5589 = VERTEX_POINT('',#5590);-#5590 = CARTESIAN_POINT('',(2.2,2.125,0.445));-#5591 = LINE('',#5592,#5593);-#5592 = CARTESIAN_POINT('',(2.4875,2.125,0.));-#5593 = VECTOR('',#5594,1.);-#5594 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5595 = ORIENTED_EDGE('',*,*,#5596,.T.);-#5596 = EDGE_CURVE('',#5589,#5501,#5597,.T.);-#5597 = LINE('',#5598,#5599);-#5598 = CARTESIAN_POINT('',(2.2,2.125,0.445));-#5599 = VECTOR('',#5600,1.);-#5600 = DIRECTION('',(-1.,0.,0.));-#5601 = ORIENTED_EDGE('',*,*,#5500,.T.);-#5602 = PLANE('',#5603);-#5603 = AXIS2_PLACEMENT_3D('',#5604,#5605,#5606);-#5604 = CARTESIAN_POINT('',(2.634182274245,2.125,0.217942023204));-#5605 = DIRECTION('',(0.,1.,0.));-#5606 = DIRECTION('',(0.,-0.,1.));-#5607 = ADVANCED_FACE('',(#5608),#5626,.T.);-#5608 = FACE_BOUND('',#5609,.T.);-#5609 = EDGE_LOOP('',(#5610,#5611,#5612,#5620));-#5610 = ORIENTED_EDGE('',*,*,#5596,.T.);-#5611 = ORIENTED_EDGE('',*,*,#5517,.F.);-#5612 = ORIENTED_EDGE('',*,*,#5613,.F.);-#5613 = EDGE_CURVE('',#5614,#5510,#5616,.T.);-#5614 = VERTEX_POINT('',#5615);-#5615 = CARTESIAN_POINT('',(2.2,2.425,0.445));-#5616 = LINE('',#5617,#5618);-#5617 = CARTESIAN_POINT('',(2.2,2.425,0.445));-#5618 = VECTOR('',#5619,1.);+#5572 = EDGE_CURVE('',#5563,#5532,#5573,.T.);+#5573 = LINE('',#5574,#5575);+#5574 = CARTESIAN_POINT('',(2.4875,2.125,0.));+#5575 = VECTOR('',#5576,1.);+#5576 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5577 = ORIENTED_EDGE('',*,*,#5548,.F.);+#5578 = ORIENTED_EDGE('',*,*,#5579,.F.);+#5579 = EDGE_CURVE('',#5565,#5541,#5580,.T.);+#5580 = LINE('',#5581,#5582);+#5581 = CARTESIAN_POINT('',(2.4875,2.425,0.));+#5582 = VECTOR('',#5583,1.);+#5583 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5584 = PLANE('',#5585);+#5585 = AXIS2_PLACEMENT_3D('',#5586,#5587,#5588);+#5586 = CARTESIAN_POINT('',(2.4875,2.275,0.));+#5587 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#5588 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5589 = ADVANCED_FACE('',(#5590),#5615,.T.);+#5590 = FACE_BOUND('',#5591,.T.);+#5591 = EDGE_LOOP('',(#5592,#5602,#5608,#5609));+#5592 = ORIENTED_EDGE('',*,*,#5593,.F.);+#5593 = EDGE_CURVE('',#5594,#5596,#5598,.T.);+#5594 = VERTEX_POINT('',#5595);+#5595 = CARTESIAN_POINT('',(3.205,2.125,0.));+#5596 = VERTEX_POINT('',#5597);+#5597 = CARTESIAN_POINT('',(3.205,2.425,0.));+#5598 = LINE('',#5599,#5600);+#5599 = CARTESIAN_POINT('',(3.205,2.125,0.));+#5600 = VECTOR('',#5601,1.);+#5601 = DIRECTION('',(0.,1.,0.));+#5602 = ORIENTED_EDGE('',*,*,#5603,.T.);+#5603 = EDGE_CURVE('',#5594,#5563,#5604,.T.);+#5604 = LINE('',#5605,#5606);+#5605 = CARTESIAN_POINT('',(3.205,2.125,0.));+#5606 = VECTOR('',#5607,1.);+#5607 = DIRECTION('',(-1.,0.,0.));+#5608 = ORIENTED_EDGE('',*,*,#5562,.T.);+#5609 = ORIENTED_EDGE('',*,*,#5610,.F.);+#5610 = EDGE_CURVE('',#5596,#5565,#5611,.T.);+#5611 = LINE('',#5612,#5613);+#5612 = CARTESIAN_POINT('',(3.205,2.425,0.));+#5613 = VECTOR('',#5614,1.);+#5614 = DIRECTION('',(-1.,0.,0.));+#5615 = PLANE('',#5616);+#5616 = AXIS2_PLACEMENT_3D('',#5617,#5618,#5619);+#5617 = CARTESIAN_POINT('',(3.205,2.275,0.));+#5618 = DIRECTION('',(-0.,-0.,-1.)); #5619 = DIRECTION('',(-1.,0.,0.));-#5620 = ORIENTED_EDGE('',*,*,#5621,.T.);-#5621 = EDGE_CURVE('',#5614,#5589,#5622,.T.);-#5622 = LINE('',#5623,#5624);-#5623 = CARTESIAN_POINT('',(2.2,2.425,0.445));-#5624 = VECTOR('',#5625,1.);-#5625 = DIRECTION('',(0.,-1.,0.));-#5626 = PLANE('',#5627);-#5627 = AXIS2_PLACEMENT_3D('',#5628,#5629,#5630);-#5628 = CARTESIAN_POINT('',(2.2,2.275,0.445));-#5629 = DIRECTION('',(-0.,-0.,-1.));-#5630 = DIRECTION('',(-1.,0.,0.));-#5631 = ADVANCED_FACE('',(#5632),#5650,.T.);-#5632 = FACE_BOUND('',#5633,.T.);-#5633 = EDGE_LOOP('',(#5634,#5635,#5636,#5644));-#5634 = ORIENTED_EDGE('',*,*,#5540,.F.);-#5635 = ORIENTED_EDGE('',*,*,#5564,.T.);-#5636 = ORIENTED_EDGE('',*,*,#5637,.T.);-#5637 = EDGE_CURVE('',#5565,#5638,#5640,.T.);-#5638 = VERTEX_POINT('',#5639);-#5639 = CARTESIAN_POINT('',(3.205,2.425,0.15));-#5640 = LINE('',#5641,#5642);-#5641 = CARTESIAN_POINT('',(3.205,2.125,0.15));-#5642 = VECTOR('',#5643,1.);-#5643 = DIRECTION('',(0.,1.,0.));-#5644 = ORIENTED_EDGE('',*,*,#5645,.F.);-#5645 = EDGE_CURVE('',#5541,#5638,#5646,.T.);-#5646 = LINE('',#5647,#5648);-#5647 = CARTESIAN_POINT('',(2.6375,2.425,0.15));-#5648 = VECTOR('',#5649,1.);+#5620 = ADVANCED_FACE('',(#5621),#5646,.T.);+#5621 = FACE_BOUND('',#5622,.T.);+#5622 = EDGE_LOOP('',(#5623,#5633,#5639,#5640));+#5623 = ORIENTED_EDGE('',*,*,#5624,.F.);+#5624 = EDGE_CURVE('',#5625,#5627,#5629,.T.);+#5625 = VERTEX_POINT('',#5626);+#5626 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#5627 = VERTEX_POINT('',#5628);+#5628 = CARTESIAN_POINT('',(3.205,2.425,0.15));+#5629 = LINE('',#5630,#5631);+#5630 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#5631 = VECTOR('',#5632,1.);+#5632 = DIRECTION('',(0.,1.,0.));+#5633 = ORIENTED_EDGE('',*,*,#5634,.T.);+#5634 = EDGE_CURVE('',#5625,#5594,#5635,.T.);+#5635 = LINE('',#5636,#5637);+#5636 = CARTESIAN_POINT('',(3.205,2.125,0.15));+#5637 = VECTOR('',#5638,1.);+#5638 = DIRECTION('',(0.,0.,-1.));+#5639 = ORIENTED_EDGE('',*,*,#5593,.T.);+#5640 = ORIENTED_EDGE('',*,*,#5641,.F.);+#5641 = EDGE_CURVE('',#5627,#5596,#5642,.T.);+#5642 = LINE('',#5643,#5644);+#5643 = CARTESIAN_POINT('',(3.205,2.425,0.15));+#5644 = VECTOR('',#5645,1.);+#5645 = DIRECTION('',(0.,0.,-1.));+#5646 = PLANE('',#5647);+#5647 = AXIS2_PLACEMENT_3D('',#5648,#5649,#5650);+#5648 = CARTESIAN_POINT('',(3.205,2.275,0.15)); #5649 = DIRECTION('',(1.,0.,0.));-#5650 = PLANE('',#5651);-#5651 = AXIS2_PLACEMENT_3D('',#5652,#5653,#5654);-#5652 = CARTESIAN_POINT('',(2.6375,2.275,0.15));-#5653 = DIRECTION('',(-0.,0.,1.));-#5654 = DIRECTION('',(1.,0.,0.));-#5655 = ADVANCED_FACE('',(#5656),#5685,.T.);-#5656 = FACE_BOUND('',#5657,.T.);-#5657 = EDGE_LOOP('',(#5658,#5659,#5660,#5661,#5669,#5677,#5683,#5684));-#5658 = ORIENTED_EDGE('',*,*,#5478,.T.);-#5659 = ORIENTED_EDGE('',*,*,#5548,.T.);-#5660 = ORIENTED_EDGE('',*,*,#5645,.T.);-#5661 = ORIENTED_EDGE('',*,*,#5662,.T.);-#5662 = EDGE_CURVE('',#5638,#5663,#5665,.T.);-#5663 = VERTEX_POINT('',#5664);-#5664 = CARTESIAN_POINT('',(3.205,2.425,0.));-#5665 = LINE('',#5666,#5667);-#5666 = CARTESIAN_POINT('',(3.205,2.425,0.15));-#5667 = VECTOR('',#5668,1.);-#5668 = DIRECTION('',(0.,0.,-1.));-#5669 = ORIENTED_EDGE('',*,*,#5670,.T.);-#5670 = EDGE_CURVE('',#5663,#5671,#5673,.T.);-#5671 = VERTEX_POINT('',#5672);-#5672 = CARTESIAN_POINT('',(2.4875,2.425,0.));+#5650 = DIRECTION('',(0.,0.,-1.));+#5651 = ADVANCED_FACE('',(#5652),#5677,.T.);+#5652 = FACE_BOUND('',#5653,.T.);+#5653 = EDGE_LOOP('',(#5654,#5664,#5670,#5671));+#5654 = ORIENTED_EDGE('',*,*,#5655,.F.);+#5655 = EDGE_CURVE('',#5656,#5658,#5660,.T.);+#5656 = VERTEX_POINT('',#5657);+#5657 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#5658 = VERTEX_POINT('',#5659);+#5659 = CARTESIAN_POINT('',(2.6375,2.425,0.15));+#5660 = LINE('',#5661,#5662);+#5661 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#5662 = VECTOR('',#5663,1.);+#5663 = DIRECTION('',(0.,1.,0.));+#5664 = ORIENTED_EDGE('',*,*,#5665,.T.);+#5665 = EDGE_CURVE('',#5656,#5625,#5666,.T.);+#5666 = LINE('',#5667,#5668);+#5667 = CARTESIAN_POINT('',(2.6375,2.125,0.15));+#5668 = VECTOR('',#5669,1.);+#5669 = DIRECTION('',(1.,0.,0.));+#5670 = ORIENTED_EDGE('',*,*,#5624,.T.);+#5671 = ORIENTED_EDGE('',*,*,#5672,.F.);+#5672 = EDGE_CURVE('',#5658,#5627,#5673,.T.); #5673 = LINE('',#5674,#5675);-#5674 = CARTESIAN_POINT('',(3.205,2.425,0.));+#5674 = CARTESIAN_POINT('',(2.6375,2.425,0.15)); #5675 = VECTOR('',#5676,1.);-#5676 = DIRECTION('',(-1.,0.,0.));-#5677 = ORIENTED_EDGE('',*,*,#5678,.T.);-#5678 = EDGE_CURVE('',#5671,#5614,#5679,.T.);-#5679 = LINE('',#5680,#5681);-#5680 = CARTESIAN_POINT('',(2.4875,2.425,0.));-#5681 = VECTOR('',#5682,1.);-#5682 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5683 = ORIENTED_EDGE('',*,*,#5613,.T.);-#5684 = ORIENTED_EDGE('',*,*,#5509,.T.);-#5685 = PLANE('',#5686);-#5686 = AXIS2_PLACEMENT_3D('',#5687,#5688,#5689);-#5687 = CARTESIAN_POINT('',(2.634182274245,2.425,0.217942023204));-#5688 = DIRECTION('',(0.,1.,0.));-#5689 = DIRECTION('',(0.,-0.,1.));-#5690 = ADVANCED_FACE('',(#5691),#5702,.T.);-#5691 = FACE_BOUND('',#5692,.T.);-#5692 = EDGE_LOOP('',(#5693,#5694,#5695,#5701));-#5693 = ORIENTED_EDGE('',*,*,#5637,.F.);-#5694 = ORIENTED_EDGE('',*,*,#5572,.T.);-#5695 = ORIENTED_EDGE('',*,*,#5696,.T.);-#5696 = EDGE_CURVE('',#5573,#5663,#5697,.T.);-#5697 = LINE('',#5698,#5699);-#5698 = CARTESIAN_POINT('',(3.205,2.125,0.));-#5699 = VECTOR('',#5700,1.);-#5700 = DIRECTION('',(0.,1.,0.));-#5701 = ORIENTED_EDGE('',*,*,#5662,.F.);-#5702 = PLANE('',#5703);-#5703 = AXIS2_PLACEMENT_3D('',#5704,#5705,#5706);-#5704 = CARTESIAN_POINT('',(3.205,2.275,0.15));-#5705 = DIRECTION('',(1.,0.,0.));-#5706 = DIRECTION('',(0.,0.,-1.));-#5707 = ADVANCED_FACE('',(#5708),#5719,.T.);-#5708 = FACE_BOUND('',#5709,.T.);-#5709 = EDGE_LOOP('',(#5710,#5711,#5712,#5718));-#5710 = ORIENTED_EDGE('',*,*,#5696,.F.);-#5711 = ORIENTED_EDGE('',*,*,#5580,.T.);-#5712 = ORIENTED_EDGE('',*,*,#5713,.T.);-#5713 = EDGE_CURVE('',#5581,#5671,#5714,.T.);-#5714 = LINE('',#5715,#5716);-#5715 = CARTESIAN_POINT('',(2.4875,2.125,0.));-#5716 = VECTOR('',#5717,1.);-#5717 = DIRECTION('',(0.,1.,0.));-#5718 = ORIENTED_EDGE('',*,*,#5670,.F.);-#5719 = PLANE('',#5720);-#5720 = AXIS2_PLACEMENT_3D('',#5721,#5722,#5723);-#5721 = CARTESIAN_POINT('',(3.205,2.275,0.));-#5722 = DIRECTION('',(-0.,-0.,-1.));-#5723 = DIRECTION('',(-1.,0.,0.));-#5724 = ADVANCED_FACE('',(#5725),#5731,.T.);-#5725 = FACE_BOUND('',#5726,.T.);-#5726 = EDGE_LOOP('',(#5727,#5728,#5729,#5730));-#5727 = ORIENTED_EDGE('',*,*,#5713,.F.);-#5728 = ORIENTED_EDGE('',*,*,#5588,.T.);-#5729 = ORIENTED_EDGE('',*,*,#5621,.F.);-#5730 = ORIENTED_EDGE('',*,*,#5678,.F.);+#5676 = DIRECTION('',(1.,0.,0.));+#5677 = PLANE('',#5678);+#5678 = AXIS2_PLACEMENT_3D('',#5679,#5680,#5681);+#5679 = CARTESIAN_POINT('',(2.6375,2.275,0.15));+#5680 = DIRECTION('',(-0.,0.,1.));+#5681 = DIRECTION('',(1.,0.,0.));+#5682 = ADVANCED_FACE('',(#5683),#5698,.T.);+#5683 = FACE_BOUND('',#5684,.T.);+#5684 = EDGE_LOOP('',(#5685,#5686,#5692,#5693,#5694,#5695,#5696,#5697));+#5685 = ORIENTED_EDGE('',*,*,#5478,.T.);+#5686 = ORIENTED_EDGE('',*,*,#5687,.T.);+#5687 = EDGE_CURVE('',#5471,#5658,#5688,.T.);+#5688 = LINE('',#5689,#5690);+#5689 = CARTESIAN_POINT('',(2.35,2.425,0.595));+#5690 = VECTOR('',#5691,1.);+#5691 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5692 = ORIENTED_EDGE('',*,*,#5672,.T.);+#5693 = ORIENTED_EDGE('',*,*,#5641,.T.);+#5694 = ORIENTED_EDGE('',*,*,#5610,.T.);+#5695 = ORIENTED_EDGE('',*,*,#5579,.T.);+#5696 = ORIENTED_EDGE('',*,*,#5540,.T.);+#5697 = ORIENTED_EDGE('',*,*,#5509,.T.);+#5698 = PLANE('',#5699);+#5699 = AXIS2_PLACEMENT_3D('',#5700,#5701,#5702);+#5700 = CARTESIAN_POINT('',(2.634182274245,2.425,0.217942023204));+#5701 = DIRECTION('',(0.,1.,0.));+#5702 = DIRECTION('',(0.,-0.,1.));+#5703 = ADVANCED_FACE('',(#5704),#5715,.T.);+#5704 = FACE_BOUND('',#5705,.T.);+#5705 = EDGE_LOOP('',(#5706,#5707,#5713,#5714));+#5706 = ORIENTED_EDGE('',*,*,#5470,.F.);+#5707 = ORIENTED_EDGE('',*,*,#5708,.T.);+#5708 = EDGE_CURVE('',#5463,#5656,#5709,.T.);+#5709 = LINE('',#5710,#5711);+#5710 = CARTESIAN_POINT('',(2.35,2.125,0.595));+#5711 = VECTOR('',#5712,1.);+#5712 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5713 = ORIENTED_EDGE('',*,*,#5655,.T.);+#5714 = ORIENTED_EDGE('',*,*,#5687,.F.);+#5715 = PLANE('',#5716);+#5716 = AXIS2_PLACEMENT_3D('',#5717,#5718,#5719);+#5717 = CARTESIAN_POINT('',(2.35,2.275,0.595));+#5718 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#5719 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5720 = ADVANCED_FACE('',(#5721),#5731,.F.);+#5721 = FACE_BOUND('',#5722,.F.);+#5722 = EDGE_LOOP('',(#5723,#5724,#5725,#5726,#5727,#5728,#5729,#5730));+#5723 = ORIENTED_EDGE('',*,*,#5460,.T.);+#5724 = ORIENTED_EDGE('',*,*,#5708,.T.);+#5725 = ORIENTED_EDGE('',*,*,#5665,.T.);+#5726 = ORIENTED_EDGE('',*,*,#5634,.T.);+#5727 = ORIENTED_EDGE('',*,*,#5603,.T.);+#5728 = ORIENTED_EDGE('',*,*,#5572,.T.);+#5729 = ORIENTED_EDGE('',*,*,#5531,.T.);+#5730 = ORIENTED_EDGE('',*,*,#5500,.T.); #5731 = PLANE('',#5732); #5732 = AXIS2_PLACEMENT_3D('',#5733,#5734,#5735);-#5733 = CARTESIAN_POINT('',(2.4875,2.275,0.));-#5734 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#5735 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5733 = CARTESIAN_POINT('',(2.634182274245,2.125,0.217942023204));+#5734 = DIRECTION('',(0.,1.,0.));+#5735 = DIRECTION('',(0.,-0.,1.)); #5736 = MANIFOLD_SOLID_BREP('',#5737);-#5737 = CLOSED_SHELL('',(#5738,#5778,#5809,#5840,#5889,#5913,#5937,#5972- ,#5989,#6006));+#5737 = CLOSED_SHELL('',(#5738,#5778,#5809,#5840,#5871,#5902,#5933,#5964+ ,#5985,#6002)); #5738 = ADVANCED_FACE('',(#5739),#5773,.T.); #5739 = FACE_BOUND('',#5740,.T.); #5740 = EDGE_LOOP('',(#5741,#5751,#5759,#5767));@@ -5862,213 +5862,213 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #5808 = DIRECTION('',(0.,0.,1.)); #5809 = ADVANCED_FACE('',(#5810),#5835,.T.); #5810 = FACE_BOUND('',#5811,.T.);-#5811 = EDGE_LOOP('',(#5812,#5813,#5821,#5829));-#5812 = ORIENTED_EDGE('',*,*,#5752,.F.);-#5813 = ORIENTED_EDGE('',*,*,#5814,.T.);-#5814 = EDGE_CURVE('',#5745,#5815,#5817,.T.);-#5815 = VERTEX_POINT('',#5816);-#5816 = CARTESIAN_POINT('',(2.6375,2.775,0.15));-#5817 = LINE('',#5818,#5819);-#5818 = CARTESIAN_POINT('',(2.35,2.775,0.595));-#5819 = VECTOR('',#5820,1.);-#5820 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5821 = ORIENTED_EDGE('',*,*,#5822,.T.);-#5822 = EDGE_CURVE('',#5815,#5823,#5825,.T.);+#5811 = EDGE_LOOP('',(#5812,#5820,#5821,#5829));+#5812 = ORIENTED_EDGE('',*,*,#5813,.T.);+#5813 = EDGE_CURVE('',#5814,#5783,#5816,.T.);+#5814 = VERTEX_POINT('',#5815);+#5815 = CARTESIAN_POINT('',(2.2,2.775,0.445));+#5816 = LINE('',#5817,#5818);+#5817 = CARTESIAN_POINT('',(2.2,2.775,0.445));+#5818 = VECTOR('',#5819,1.);+#5819 = DIRECTION('',(-1.,0.,0.));+#5820 = ORIENTED_EDGE('',*,*,#5799,.F.);+#5821 = ORIENTED_EDGE('',*,*,#5822,.F.);+#5822 = EDGE_CURVE('',#5823,#5792,#5825,.T.); #5823 = VERTEX_POINT('',#5824);-#5824 = CARTESIAN_POINT('',(2.6375,3.075,0.15));+#5824 = CARTESIAN_POINT('',(2.2,3.075,0.445)); #5825 = LINE('',#5826,#5827);-#5826 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#5826 = CARTESIAN_POINT('',(2.2,3.075,0.445)); #5827 = VECTOR('',#5828,1.);-#5828 = DIRECTION('',(0.,1.,0.));-#5829 = ORIENTED_EDGE('',*,*,#5830,.F.);-#5830 = EDGE_CURVE('',#5753,#5823,#5831,.T.);+#5828 = DIRECTION('',(-1.,0.,0.));+#5829 = ORIENTED_EDGE('',*,*,#5830,.T.);+#5830 = EDGE_CURVE('',#5823,#5814,#5831,.T.); #5831 = LINE('',#5832,#5833);-#5832 = CARTESIAN_POINT('',(2.35,3.075,0.595));+#5832 = CARTESIAN_POINT('',(2.2,3.075,0.445)); #5833 = VECTOR('',#5834,1.);-#5834 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5834 = DIRECTION('',(0.,-1.,0.)); #5835 = PLANE('',#5836); #5836 = AXIS2_PLACEMENT_3D('',#5837,#5838,#5839);-#5837 = CARTESIAN_POINT('',(2.35,2.925,0.595));-#5838 = DIRECTION('',(0.839949759337,0.,0.542664170358));-#5839 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#5840 = ADVANCED_FACE('',(#5841),#5884,.F.);-#5841 = FACE_BOUND('',#5842,.F.);-#5842 = EDGE_LOOP('',(#5843,#5844,#5845,#5853,#5861,#5869,#5877,#5883));-#5843 = ORIENTED_EDGE('',*,*,#5742,.T.);-#5844 = ORIENTED_EDGE('',*,*,#5814,.T.);-#5845 = ORIENTED_EDGE('',*,*,#5846,.T.);-#5846 = EDGE_CURVE('',#5815,#5847,#5849,.T.);+#5837 = CARTESIAN_POINT('',(2.2,2.925,0.445));+#5838 = DIRECTION('',(-0.,-0.,-1.));+#5839 = DIRECTION('',(-1.,0.,0.));+#5840 = ADVANCED_FACE('',(#5841),#5866,.T.);+#5841 = FACE_BOUND('',#5842,.T.);+#5842 = EDGE_LOOP('',(#5843,#5853,#5859,#5860));+#5843 = ORIENTED_EDGE('',*,*,#5844,.F.);+#5844 = EDGE_CURVE('',#5845,#5847,#5849,.T.);+#5845 = VERTEX_POINT('',#5846);+#5846 = CARTESIAN_POINT('',(2.4875,2.775,0.)); #5847 = VERTEX_POINT('',#5848);-#5848 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#5848 = CARTESIAN_POINT('',(2.4875,3.075,0.)); #5849 = LINE('',#5850,#5851);-#5850 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#5850 = CARTESIAN_POINT('',(2.4875,2.775,0.)); #5851 = VECTOR('',#5852,1.);-#5852 = DIRECTION('',(1.,0.,0.));+#5852 = DIRECTION('',(0.,1.,0.)); #5853 = ORIENTED_EDGE('',*,*,#5854,.T.);-#5854 = EDGE_CURVE('',#5847,#5855,#5857,.T.);-#5855 = VERTEX_POINT('',#5856);-#5856 = CARTESIAN_POINT('',(3.205,2.775,0.));-#5857 = LINE('',#5858,#5859);-#5858 = CARTESIAN_POINT('',(3.205,2.775,0.15));-#5859 = VECTOR('',#5860,1.);-#5860 = DIRECTION('',(0.,0.,-1.));-#5861 = ORIENTED_EDGE('',*,*,#5862,.T.);-#5862 = EDGE_CURVE('',#5855,#5863,#5865,.T.);-#5863 = VERTEX_POINT('',#5864);-#5864 = CARTESIAN_POINT('',(2.4875,2.775,0.));-#5865 = LINE('',#5866,#5867);-#5866 = CARTESIAN_POINT('',(3.205,2.775,0.));-#5867 = VECTOR('',#5868,1.);-#5868 = DIRECTION('',(-1.,0.,0.));-#5869 = ORIENTED_EDGE('',*,*,#5870,.T.);-#5870 = EDGE_CURVE('',#5863,#5871,#5873,.T.);-#5871 = VERTEX_POINT('',#5872);-#5872 = CARTESIAN_POINT('',(2.2,2.775,0.445));-#5873 = LINE('',#5874,#5875);-#5874 = CARTESIAN_POINT('',(2.4875,2.775,0.));-#5875 = VECTOR('',#5876,1.);-#5876 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5877 = ORIENTED_EDGE('',*,*,#5878,.T.);-#5878 = EDGE_CURVE('',#5871,#5783,#5879,.T.);-#5879 = LINE('',#5880,#5881);-#5880 = CARTESIAN_POINT('',(2.2,2.775,0.445));-#5881 = VECTOR('',#5882,1.);-#5882 = DIRECTION('',(-1.,0.,0.));-#5883 = ORIENTED_EDGE('',*,*,#5782,.T.);-#5884 = PLANE('',#5885);-#5885 = AXIS2_PLACEMENT_3D('',#5886,#5887,#5888);-#5886 = CARTESIAN_POINT('',(2.634182274245,2.775,0.217942023204));-#5887 = DIRECTION('',(0.,1.,0.));-#5888 = DIRECTION('',(0.,-0.,1.));-#5889 = ADVANCED_FACE('',(#5890),#5908,.T.);-#5890 = FACE_BOUND('',#5891,.T.);-#5891 = EDGE_LOOP('',(#5892,#5893,#5894,#5902));-#5892 = ORIENTED_EDGE('',*,*,#5878,.T.);-#5893 = ORIENTED_EDGE('',*,*,#5799,.F.);-#5894 = ORIENTED_EDGE('',*,*,#5895,.F.);-#5895 = EDGE_CURVE('',#5896,#5792,#5898,.T.);-#5896 = VERTEX_POINT('',#5897);-#5897 = CARTESIAN_POINT('',(2.2,3.075,0.445));-#5898 = LINE('',#5899,#5900);-#5899 = CARTESIAN_POINT('',(2.2,3.075,0.445));-#5900 = VECTOR('',#5901,1.);+#5854 = EDGE_CURVE('',#5845,#5814,#5855,.T.);+#5855 = LINE('',#5856,#5857);+#5856 = CARTESIAN_POINT('',(2.4875,2.775,0.));+#5857 = VECTOR('',#5858,1.);+#5858 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5859 = ORIENTED_EDGE('',*,*,#5830,.F.);+#5860 = ORIENTED_EDGE('',*,*,#5861,.F.);+#5861 = EDGE_CURVE('',#5847,#5823,#5862,.T.);+#5862 = LINE('',#5863,#5864);+#5863 = CARTESIAN_POINT('',(2.4875,3.075,0.));+#5864 = VECTOR('',#5865,1.);+#5865 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5866 = PLANE('',#5867);+#5867 = AXIS2_PLACEMENT_3D('',#5868,#5869,#5870);+#5868 = CARTESIAN_POINT('',(2.4875,2.925,0.));+#5869 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#5870 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#5871 = ADVANCED_FACE('',(#5872),#5897,.T.);+#5872 = FACE_BOUND('',#5873,.T.);+#5873 = EDGE_LOOP('',(#5874,#5884,#5890,#5891));+#5874 = ORIENTED_EDGE('',*,*,#5875,.F.);+#5875 = EDGE_CURVE('',#5876,#5878,#5880,.T.);+#5876 = VERTEX_POINT('',#5877);+#5877 = CARTESIAN_POINT('',(3.205,2.775,0.));+#5878 = VERTEX_POINT('',#5879);+#5879 = CARTESIAN_POINT('',(3.205,3.075,0.));+#5880 = LINE('',#5881,#5882);+#5881 = CARTESIAN_POINT('',(3.205,2.775,0.));+#5882 = VECTOR('',#5883,1.);+#5883 = DIRECTION('',(0.,1.,0.));+#5884 = ORIENTED_EDGE('',*,*,#5885,.T.);+#5885 = EDGE_CURVE('',#5876,#5845,#5886,.T.);+#5886 = LINE('',#5887,#5888);+#5887 = CARTESIAN_POINT('',(3.205,2.775,0.));+#5888 = VECTOR('',#5889,1.);+#5889 = DIRECTION('',(-1.,0.,0.));+#5890 = ORIENTED_EDGE('',*,*,#5844,.T.);+#5891 = ORIENTED_EDGE('',*,*,#5892,.F.);+#5892 = EDGE_CURVE('',#5878,#5847,#5893,.T.);+#5893 = LINE('',#5894,#5895);+#5894 = CARTESIAN_POINT('',(3.205,3.075,0.));+#5895 = VECTOR('',#5896,1.);+#5896 = DIRECTION('',(-1.,0.,0.));+#5897 = PLANE('',#5898);+#5898 = AXIS2_PLACEMENT_3D('',#5899,#5900,#5901);+#5899 = CARTESIAN_POINT('',(3.205,2.925,0.));+#5900 = DIRECTION('',(-0.,-0.,-1.)); #5901 = DIRECTION('',(-1.,0.,0.));-#5902 = ORIENTED_EDGE('',*,*,#5903,.T.);-#5903 = EDGE_CURVE('',#5896,#5871,#5904,.T.);-#5904 = LINE('',#5905,#5906);-#5905 = CARTESIAN_POINT('',(2.2,3.075,0.445));-#5906 = VECTOR('',#5907,1.);-#5907 = DIRECTION('',(0.,-1.,0.));-#5908 = PLANE('',#5909);-#5909 = AXIS2_PLACEMENT_3D('',#5910,#5911,#5912);-#5910 = CARTESIAN_POINT('',(2.2,2.925,0.445));-#5911 = DIRECTION('',(-0.,-0.,-1.));-#5912 = DIRECTION('',(-1.,0.,0.));-#5913 = ADVANCED_FACE('',(#5914),#5932,.T.);-#5914 = FACE_BOUND('',#5915,.T.);-#5915 = EDGE_LOOP('',(#5916,#5917,#5918,#5926));-#5916 = ORIENTED_EDGE('',*,*,#5822,.F.);-#5917 = ORIENTED_EDGE('',*,*,#5846,.T.);-#5918 = ORIENTED_EDGE('',*,*,#5919,.T.);-#5919 = EDGE_CURVE('',#5847,#5920,#5922,.T.);-#5920 = VERTEX_POINT('',#5921);-#5921 = CARTESIAN_POINT('',(3.205,3.075,0.15));-#5922 = LINE('',#5923,#5924);-#5923 = CARTESIAN_POINT('',(3.205,2.775,0.15));-#5924 = VECTOR('',#5925,1.);-#5925 = DIRECTION('',(0.,1.,0.));-#5926 = ORIENTED_EDGE('',*,*,#5927,.F.);-#5927 = EDGE_CURVE('',#5823,#5920,#5928,.T.);-#5928 = LINE('',#5929,#5930);-#5929 = CARTESIAN_POINT('',(2.6375,3.075,0.15));-#5930 = VECTOR('',#5931,1.);+#5902 = ADVANCED_FACE('',(#5903),#5928,.T.);+#5903 = FACE_BOUND('',#5904,.T.);+#5904 = EDGE_LOOP('',(#5905,#5915,#5921,#5922));+#5905 = ORIENTED_EDGE('',*,*,#5906,.F.);+#5906 = EDGE_CURVE('',#5907,#5909,#5911,.T.);+#5907 = VERTEX_POINT('',#5908);+#5908 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#5909 = VERTEX_POINT('',#5910);+#5910 = CARTESIAN_POINT('',(3.205,3.075,0.15));+#5911 = LINE('',#5912,#5913);+#5912 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#5913 = VECTOR('',#5914,1.);+#5914 = DIRECTION('',(0.,1.,0.));+#5915 = ORIENTED_EDGE('',*,*,#5916,.T.);+#5916 = EDGE_CURVE('',#5907,#5876,#5917,.T.);+#5917 = LINE('',#5918,#5919);+#5918 = CARTESIAN_POINT('',(3.205,2.775,0.15));+#5919 = VECTOR('',#5920,1.);+#5920 = DIRECTION('',(0.,0.,-1.));+#5921 = ORIENTED_EDGE('',*,*,#5875,.T.);+#5922 = ORIENTED_EDGE('',*,*,#5923,.F.);+#5923 = EDGE_CURVE('',#5909,#5878,#5924,.T.);+#5924 = LINE('',#5925,#5926);+#5925 = CARTESIAN_POINT('',(3.205,3.075,0.15));+#5926 = VECTOR('',#5927,1.);+#5927 = DIRECTION('',(0.,0.,-1.));+#5928 = PLANE('',#5929);+#5929 = AXIS2_PLACEMENT_3D('',#5930,#5931,#5932);+#5930 = CARTESIAN_POINT('',(3.205,2.925,0.15)); #5931 = DIRECTION('',(1.,0.,0.));-#5932 = PLANE('',#5933);-#5933 = AXIS2_PLACEMENT_3D('',#5934,#5935,#5936);-#5934 = CARTESIAN_POINT('',(2.6375,2.925,0.15));-#5935 = DIRECTION('',(-0.,0.,1.));-#5936 = DIRECTION('',(1.,0.,0.));-#5937 = ADVANCED_FACE('',(#5938),#5967,.T.);-#5938 = FACE_BOUND('',#5939,.T.);-#5939 = EDGE_LOOP('',(#5940,#5941,#5942,#5943,#5951,#5959,#5965,#5966));-#5940 = ORIENTED_EDGE('',*,*,#5760,.T.);-#5941 = ORIENTED_EDGE('',*,*,#5830,.T.);-#5942 = ORIENTED_EDGE('',*,*,#5927,.T.);-#5943 = ORIENTED_EDGE('',*,*,#5944,.T.);-#5944 = EDGE_CURVE('',#5920,#5945,#5947,.T.);-#5945 = VERTEX_POINT('',#5946);-#5946 = CARTESIAN_POINT('',(3.205,3.075,0.));-#5947 = LINE('',#5948,#5949);-#5948 = CARTESIAN_POINT('',(3.205,3.075,0.15));-#5949 = VECTOR('',#5950,1.);-#5950 = DIRECTION('',(0.,0.,-1.));-#5951 = ORIENTED_EDGE('',*,*,#5952,.T.);-#5952 = EDGE_CURVE('',#5945,#5953,#5955,.T.);-#5953 = VERTEX_POINT('',#5954);-#5954 = CARTESIAN_POINT('',(2.4875,3.075,0.));+#5932 = DIRECTION('',(0.,0.,-1.));+#5933 = ADVANCED_FACE('',(#5934),#5959,.T.);+#5934 = FACE_BOUND('',#5935,.T.);+#5935 = EDGE_LOOP('',(#5936,#5946,#5952,#5953));+#5936 = ORIENTED_EDGE('',*,*,#5937,.F.);+#5937 = EDGE_CURVE('',#5938,#5940,#5942,.T.);+#5938 = VERTEX_POINT('',#5939);+#5939 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#5940 = VERTEX_POINT('',#5941);+#5941 = CARTESIAN_POINT('',(2.6375,3.075,0.15));+#5942 = LINE('',#5943,#5944);+#5943 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#5944 = VECTOR('',#5945,1.);+#5945 = DIRECTION('',(0.,1.,0.));+#5946 = ORIENTED_EDGE('',*,*,#5947,.T.);+#5947 = EDGE_CURVE('',#5938,#5907,#5948,.T.);+#5948 = LINE('',#5949,#5950);+#5949 = CARTESIAN_POINT('',(2.6375,2.775,0.15));+#5950 = VECTOR('',#5951,1.);+#5951 = DIRECTION('',(1.,0.,0.));+#5952 = ORIENTED_EDGE('',*,*,#5906,.T.);+#5953 = ORIENTED_EDGE('',*,*,#5954,.F.);+#5954 = EDGE_CURVE('',#5940,#5909,#5955,.T.); #5955 = LINE('',#5956,#5957);-#5956 = CARTESIAN_POINT('',(3.205,3.075,0.));+#5956 = CARTESIAN_POINT('',(2.6375,3.075,0.15)); #5957 = VECTOR('',#5958,1.);-#5958 = DIRECTION('',(-1.,0.,0.));-#5959 = ORIENTED_EDGE('',*,*,#5960,.T.);-#5960 = EDGE_CURVE('',#5953,#5896,#5961,.T.);-#5961 = LINE('',#5962,#5963);-#5962 = CARTESIAN_POINT('',(2.4875,3.075,0.));-#5963 = VECTOR('',#5964,1.);-#5964 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#5965 = ORIENTED_EDGE('',*,*,#5895,.T.);-#5966 = ORIENTED_EDGE('',*,*,#5791,.T.);-#5967 = PLANE('',#5968);-#5968 = AXIS2_PLACEMENT_3D('',#5969,#5970,#5971);-#5969 = CARTESIAN_POINT('',(2.634182274245,3.075,0.217942023204));-#5970 = DIRECTION('',(0.,1.,0.));-#5971 = DIRECTION('',(0.,-0.,1.));-#5972 = ADVANCED_FACE('',(#5973),#5984,.T.);-#5973 = FACE_BOUND('',#5974,.T.);-#5974 = EDGE_LOOP('',(#5975,#5976,#5977,#5983));-#5975 = ORIENTED_EDGE('',*,*,#5919,.F.);-#5976 = ORIENTED_EDGE('',*,*,#5854,.T.);-#5977 = ORIENTED_EDGE('',*,*,#5978,.T.);-#5978 = EDGE_CURVE('',#5855,#5945,#5979,.T.);-#5979 = LINE('',#5980,#5981);-#5980 = CARTESIAN_POINT('',(3.205,2.775,0.));-#5981 = VECTOR('',#5982,1.);-#5982 = DIRECTION('',(0.,1.,0.));-#5983 = ORIENTED_EDGE('',*,*,#5944,.F.);-#5984 = PLANE('',#5985);-#5985 = AXIS2_PLACEMENT_3D('',#5986,#5987,#5988);-#5986 = CARTESIAN_POINT('',(3.205,2.925,0.15));-#5987 = DIRECTION('',(1.,0.,0.));-#5988 = DIRECTION('',(0.,0.,-1.));-#5989 = ADVANCED_FACE('',(#5990),#6001,.T.);-#5990 = FACE_BOUND('',#5991,.T.);-#5991 = EDGE_LOOP('',(#5992,#5993,#5994,#6000));-#5992 = ORIENTED_EDGE('',*,*,#5978,.F.);-#5993 = ORIENTED_EDGE('',*,*,#5862,.T.);-#5994 = ORIENTED_EDGE('',*,*,#5995,.T.);-#5995 = EDGE_CURVE('',#5863,#5953,#5996,.T.);-#5996 = LINE('',#5997,#5998);-#5997 = CARTESIAN_POINT('',(2.4875,2.775,0.));-#5998 = VECTOR('',#5999,1.);-#5999 = DIRECTION('',(0.,1.,0.));-#6000 = ORIENTED_EDGE('',*,*,#5952,.F.);-#6001 = PLANE('',#6002);-#6002 = AXIS2_PLACEMENT_3D('',#6003,#6004,#6005);-#6003 = CARTESIAN_POINT('',(3.205,2.925,0.));-#6004 = DIRECTION('',(-0.,-0.,-1.));-#6005 = DIRECTION('',(-1.,0.,0.));-#6006 = ADVANCED_FACE('',(#6007),#6013,.T.);-#6007 = FACE_BOUND('',#6008,.T.);-#6008 = EDGE_LOOP('',(#6009,#6010,#6011,#6012));-#6009 = ORIENTED_EDGE('',*,*,#5995,.F.);-#6010 = ORIENTED_EDGE('',*,*,#5870,.T.);-#6011 = ORIENTED_EDGE('',*,*,#5903,.F.);-#6012 = ORIENTED_EDGE('',*,*,#5960,.F.);+#5958 = DIRECTION('',(1.,0.,0.));+#5959 = PLANE('',#5960);+#5960 = AXIS2_PLACEMENT_3D('',#5961,#5962,#5963);+#5961 = CARTESIAN_POINT('',(2.6375,2.925,0.15));+#5962 = DIRECTION('',(-0.,0.,1.));+#5963 = DIRECTION('',(1.,0.,0.));+#5964 = ADVANCED_FACE('',(#5965),#5980,.T.);+#5965 = FACE_BOUND('',#5966,.T.);+#5966 = EDGE_LOOP('',(#5967,#5968,#5974,#5975,#5976,#5977,#5978,#5979));+#5967 = ORIENTED_EDGE('',*,*,#5760,.T.);+#5968 = ORIENTED_EDGE('',*,*,#5969,.T.);+#5969 = EDGE_CURVE('',#5753,#5940,#5970,.T.);+#5970 = LINE('',#5971,#5972);+#5971 = CARTESIAN_POINT('',(2.35,3.075,0.595));+#5972 = VECTOR('',#5973,1.);+#5973 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5974 = ORIENTED_EDGE('',*,*,#5954,.T.);+#5975 = ORIENTED_EDGE('',*,*,#5923,.T.);+#5976 = ORIENTED_EDGE('',*,*,#5892,.T.);+#5977 = ORIENTED_EDGE('',*,*,#5861,.T.);+#5978 = ORIENTED_EDGE('',*,*,#5822,.T.);+#5979 = ORIENTED_EDGE('',*,*,#5791,.T.);+#5980 = PLANE('',#5981);+#5981 = AXIS2_PLACEMENT_3D('',#5982,#5983,#5984);+#5982 = CARTESIAN_POINT('',(2.634182274245,3.075,0.217942023204));+#5983 = DIRECTION('',(0.,1.,0.));+#5984 = DIRECTION('',(0.,-0.,1.));+#5985 = ADVANCED_FACE('',(#5986),#5997,.T.);+#5986 = FACE_BOUND('',#5987,.T.);+#5987 = EDGE_LOOP('',(#5988,#5989,#5995,#5996));+#5988 = ORIENTED_EDGE('',*,*,#5752,.F.);+#5989 = ORIENTED_EDGE('',*,*,#5990,.T.);+#5990 = EDGE_CURVE('',#5745,#5938,#5991,.T.);+#5991 = LINE('',#5992,#5993);+#5992 = CARTESIAN_POINT('',(2.35,2.775,0.595));+#5993 = VECTOR('',#5994,1.);+#5994 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#5995 = ORIENTED_EDGE('',*,*,#5937,.T.);+#5996 = ORIENTED_EDGE('',*,*,#5969,.F.);+#5997 = PLANE('',#5998);+#5998 = AXIS2_PLACEMENT_3D('',#5999,#6000,#6001);+#5999 = CARTESIAN_POINT('',(2.35,2.925,0.595));+#6000 = DIRECTION('',(0.839949759337,0.,0.542664170358));+#6001 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#6002 = ADVANCED_FACE('',(#6003),#6013,.F.);+#6003 = FACE_BOUND('',#6004,.F.);+#6004 = EDGE_LOOP('',(#6005,#6006,#6007,#6008,#6009,#6010,#6011,#6012));+#6005 = ORIENTED_EDGE('',*,*,#5742,.T.);+#6006 = ORIENTED_EDGE('',*,*,#5990,.T.);+#6007 = ORIENTED_EDGE('',*,*,#5947,.T.);+#6008 = ORIENTED_EDGE('',*,*,#5916,.T.);+#6009 = ORIENTED_EDGE('',*,*,#5885,.T.);+#6010 = ORIENTED_EDGE('',*,*,#5854,.T.);+#6011 = ORIENTED_EDGE('',*,*,#5813,.T.);+#6012 = ORIENTED_EDGE('',*,*,#5782,.T.); #6013 = PLANE('',#6014); #6014 = AXIS2_PLACEMENT_3D('',#6015,#6016,#6017);-#6015 = CARTESIAN_POINT('',(2.4875,2.925,0.));-#6016 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#6017 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#6015 = CARTESIAN_POINT('',(2.634182274245,2.775,0.217942023204));+#6016 = DIRECTION('',(0.,1.,0.));+#6017 = DIRECTION('',(0.,-0.,1.)); #6018 = MANIFOLD_SOLID_BREP('',#6019); #6019 = CLOSED_SHELL('',(#6020,#6060,#6100,#6122,#6144,#6156)); #6020 = ADVANCED_FACE('',(#6021),#6055,.F.);@@ -6235,7 +6235,7 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #6175 = ITEM_DEFINED_TRANSFORMATION('','',#11,#41); #6176 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', #6177);-#6177 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7432','terminals','',#31,#372,$+#6177 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11285','terminals','',#31,#372,$ ); #6178 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#374)); #6179 = SHAPE_DEFINITION_REPRESENTATION(#6180,#6186);@@ -6315,8 +6315,8 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #6247 = ITEM_DEFINED_TRANSFORMATION('','',#11,#45); #6248 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', #6249);-#6249 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7433','pin1_mark','',#31,#6181,$- );+#6249 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11286','pin1_mark','',#31,#6181,+ $); #6250 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6183)); #6251 = SHAPE_DEFINITION_REPRESENTATION(#6252,#6258); #6252 = PRODUCT_DEFINITION_SHAPE('','',#6253);@@ -15889,19 +15889,19 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #13524 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); #13525 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', #13526);-#13526 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7435','=>[0:1:1:5]','',#5,#6253- ,$);+#13526 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11288','=>[0:1:1:5]','',#5,+ #6253,$); #13527 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6255)); #13528 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(- #13529),#6240);-#13529 = STYLED_ITEM('color',(#13530),#6187);+ #13529),#359);+#13529 = STYLED_ITEM('color',(#13530),#68); #13530 = PRESENTATION_STYLE_ASSIGNMENT((#13531)); #13531 = SURFACE_STYLE_USAGE(.BOTH.,#13532); #13532 = SURFACE_SIDE_STYLE('',(#13533)); #13533 = SURFACE_STYLE_FILL_AREA(#13534); #13534 = FILL_AREA_STYLE('',(#13535)); #13535 = FILL_AREA_STYLE_COLOUR('',#13536);-#13536 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#13536 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093); #13537 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( #13538,#13548,#13557,#13566,#13575,#13584,#13593,#13602,#13611, #13620,#13629,#13638),#13517);@@ -16015,166 +16015,166 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #13645 = CURVE_STYLE('',#13646,POSITIVE_LENGTH_MEASURE(0.1),#13545); #13646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); #13647 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(- #13648,#13656,#13663,#13670,#13677,#13684,#13691,#13698,#13705,- #13712,#13719,#13726,#13733,#13740,#13747,#13754,#13761,#13768,- #13775,#13782,#13789),#6168);-#13648 = STYLED_ITEM('color',(#13649),#378);+ #13648),#6240);+#13648 = STYLED_ITEM('color',(#13649),#6187); #13649 = PRESENTATION_STYLE_ASSIGNMENT((#13650)); #13650 = SURFACE_STYLE_USAGE(.BOTH.,#13651); #13651 = SURFACE_SIDE_STYLE('',(#13652)); #13652 = SURFACE_STYLE_FILL_AREA(#13653); #13653 = FILL_AREA_STYLE('',(#13654)); #13654 = FILL_AREA_STYLE_COLOUR('',#13655);-#13655 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);-#13656 = STYLED_ITEM('color',(#13657),#660);-#13657 = PRESENTATION_STYLE_ASSIGNMENT((#13658));-#13658 = SURFACE_STYLE_USAGE(.BOTH.,#13659);-#13659 = SURFACE_SIDE_STYLE('',(#13660));-#13660 = SURFACE_STYLE_FILL_AREA(#13661);-#13661 = FILL_AREA_STYLE('',(#13662));-#13662 = FILL_AREA_STYLE_COLOUR('',#13655);-#13663 = STYLED_ITEM('color',(#13664),#942);-#13664 = PRESENTATION_STYLE_ASSIGNMENT((#13665));-#13665 = SURFACE_STYLE_USAGE(.BOTH.,#13666);-#13666 = SURFACE_SIDE_STYLE('',(#13667));-#13667 = SURFACE_STYLE_FILL_AREA(#13668);-#13668 = FILL_AREA_STYLE('',(#13669));-#13669 = FILL_AREA_STYLE_COLOUR('',#13655);-#13670 = STYLED_ITEM('color',(#13671),#1224);-#13671 = PRESENTATION_STYLE_ASSIGNMENT((#13672));-#13672 = SURFACE_STYLE_USAGE(.BOTH.,#13673);-#13673 = SURFACE_SIDE_STYLE('',(#13674));-#13674 = SURFACE_STYLE_FILL_AREA(#13675);-#13675 = FILL_AREA_STYLE('',(#13676));-#13676 = FILL_AREA_STYLE_COLOUR('',#13655);-#13677 = STYLED_ITEM('color',(#13678),#1506);-#13678 = PRESENTATION_STYLE_ASSIGNMENT((#13679));-#13679 = SURFACE_STYLE_USAGE(.BOTH.,#13680);-#13680 = SURFACE_SIDE_STYLE('',(#13681));-#13681 = SURFACE_STYLE_FILL_AREA(#13682);-#13682 = FILL_AREA_STYLE('',(#13683));-#13683 = FILL_AREA_STYLE_COLOUR('',#13655);-#13684 = STYLED_ITEM('color',(#13685),#1788);-#13685 = PRESENTATION_STYLE_ASSIGNMENT((#13686));-#13686 = SURFACE_STYLE_USAGE(.BOTH.,#13687);-#13687 = SURFACE_SIDE_STYLE('',(#13688));-#13688 = SURFACE_STYLE_FILL_AREA(#13689);-#13689 = FILL_AREA_STYLE('',(#13690));-#13690 = FILL_AREA_STYLE_COLOUR('',#13655);-#13691 = STYLED_ITEM('color',(#13692),#2070);-#13692 = PRESENTATION_STYLE_ASSIGNMENT((#13693));-#13693 = SURFACE_STYLE_USAGE(.BOTH.,#13694);-#13694 = SURFACE_SIDE_STYLE('',(#13695));-#13695 = SURFACE_STYLE_FILL_AREA(#13696);-#13696 = FILL_AREA_STYLE('',(#13697));-#13697 = FILL_AREA_STYLE_COLOUR('',#13655);-#13698 = STYLED_ITEM('color',(#13699),#2352);-#13699 = PRESENTATION_STYLE_ASSIGNMENT((#13700));-#13700 = SURFACE_STYLE_USAGE(.BOTH.,#13701);-#13701 = SURFACE_SIDE_STYLE('',(#13702));-#13702 = SURFACE_STYLE_FILL_AREA(#13703);-#13703 = FILL_AREA_STYLE('',(#13704));-#13704 = FILL_AREA_STYLE_COLOUR('',#13655);-#13705 = STYLED_ITEM('color',(#13706),#2634);-#13706 = PRESENTATION_STYLE_ASSIGNMENT((#13707));-#13707 = SURFACE_STYLE_USAGE(.BOTH.,#13708);-#13708 = SURFACE_SIDE_STYLE('',(#13709));-#13709 = SURFACE_STYLE_FILL_AREA(#13710);-#13710 = FILL_AREA_STYLE('',(#13711));-#13711 = FILL_AREA_STYLE_COLOUR('',#13655);-#13712 = STYLED_ITEM('color',(#13713),#2916);-#13713 = PRESENTATION_STYLE_ASSIGNMENT((#13714));-#13714 = SURFACE_STYLE_USAGE(.BOTH.,#13715);-#13715 = SURFACE_SIDE_STYLE('',(#13716));-#13716 = SURFACE_STYLE_FILL_AREA(#13717);-#13717 = FILL_AREA_STYLE('',(#13718));-#13718 = FILL_AREA_STYLE_COLOUR('',#13655);-#13719 = STYLED_ITEM('color',(#13720),#3198);-#13720 = PRESENTATION_STYLE_ASSIGNMENT((#13721));-#13721 = SURFACE_STYLE_USAGE(.BOTH.,#13722);-#13722 = SURFACE_SIDE_STYLE('',(#13723));-#13723 = SURFACE_STYLE_FILL_AREA(#13724);-#13724 = FILL_AREA_STYLE('',(#13725));-#13725 = FILL_AREA_STYLE_COLOUR('',#13655);-#13726 = STYLED_ITEM('color',(#13727),#3480);-#13727 = PRESENTATION_STYLE_ASSIGNMENT((#13728));-#13728 = SURFACE_STYLE_USAGE(.BOTH.,#13729);-#13729 = SURFACE_SIDE_STYLE('',(#13730));-#13730 = SURFACE_STYLE_FILL_AREA(#13731);-#13731 = FILL_AREA_STYLE('',(#13732));-#13732 = FILL_AREA_STYLE_COLOUR('',#13655);-#13733 = STYLED_ITEM('color',(#13734),#3762);-#13734 = PRESENTATION_STYLE_ASSIGNMENT((#13735));-#13735 = SURFACE_STYLE_USAGE(.BOTH.,#13736);-#13736 = SURFACE_SIDE_STYLE('',(#13737));-#13737 = SURFACE_STYLE_FILL_AREA(#13738);-#13738 = FILL_AREA_STYLE('',(#13739));-#13739 = FILL_AREA_STYLE_COLOUR('',#13655);-#13740 = STYLED_ITEM('color',(#13741),#4044);-#13741 = PRESENTATION_STYLE_ASSIGNMENT((#13742));-#13742 = SURFACE_STYLE_USAGE(.BOTH.,#13743);-#13743 = SURFACE_SIDE_STYLE('',(#13744));-#13744 = SURFACE_STYLE_FILL_AREA(#13745);-#13745 = FILL_AREA_STYLE('',(#13746));-#13746 = FILL_AREA_STYLE_COLOUR('',#13655);-#13747 = STYLED_ITEM('color',(#13748),#4326);-#13748 = PRESENTATION_STYLE_ASSIGNMENT((#13749));-#13749 = SURFACE_STYLE_USAGE(.BOTH.,#13750);-#13750 = SURFACE_SIDE_STYLE('',(#13751));-#13751 = SURFACE_STYLE_FILL_AREA(#13752);-#13752 = FILL_AREA_STYLE('',(#13753));-#13753 = FILL_AREA_STYLE_COLOUR('',#13655);-#13754 = STYLED_ITEM('color',(#13755),#4608);-#13755 = PRESENTATION_STYLE_ASSIGNMENT((#13756));-#13756 = SURFACE_STYLE_USAGE(.BOTH.,#13757);-#13757 = SURFACE_SIDE_STYLE('',(#13758));-#13758 = SURFACE_STYLE_FILL_AREA(#13759);-#13759 = FILL_AREA_STYLE('',(#13760));-#13760 = FILL_AREA_STYLE_COLOUR('',#13655);-#13761 = STYLED_ITEM('color',(#13762),#4890);-#13762 = PRESENTATION_STYLE_ASSIGNMENT((#13763));-#13763 = SURFACE_STYLE_USAGE(.BOTH.,#13764);-#13764 = SURFACE_SIDE_STYLE('',(#13765));-#13765 = SURFACE_STYLE_FILL_AREA(#13766);-#13766 = FILL_AREA_STYLE('',(#13767));-#13767 = FILL_AREA_STYLE_COLOUR('',#13655);-#13768 = STYLED_ITEM('color',(#13769),#5172);-#13769 = PRESENTATION_STYLE_ASSIGNMENT((#13770));-#13770 = SURFACE_STYLE_USAGE(.BOTH.,#13771);-#13771 = SURFACE_SIDE_STYLE('',(#13772));-#13772 = SURFACE_STYLE_FILL_AREA(#13773);-#13773 = FILL_AREA_STYLE('',(#13774));-#13774 = FILL_AREA_STYLE_COLOUR('',#13655);-#13775 = STYLED_ITEM('color',(#13776),#5454);-#13776 = PRESENTATION_STYLE_ASSIGNMENT((#13777));-#13777 = SURFACE_STYLE_USAGE(.BOTH.,#13778);-#13778 = SURFACE_SIDE_STYLE('',(#13779));-#13779 = SURFACE_STYLE_FILL_AREA(#13780);-#13780 = FILL_AREA_STYLE('',(#13781));-#13781 = FILL_AREA_STYLE_COLOUR('',#13655);-#13782 = STYLED_ITEM('color',(#13783),#5736);-#13783 = PRESENTATION_STYLE_ASSIGNMENT((#13784));-#13784 = SURFACE_STYLE_USAGE(.BOTH.,#13785);-#13785 = SURFACE_SIDE_STYLE('',(#13786));-#13786 = SURFACE_STYLE_FILL_AREA(#13787);-#13787 = FILL_AREA_STYLE('',(#13788));-#13788 = FILL_AREA_STYLE_COLOUR('',#13655);-#13789 = STYLED_ITEM('color',(#13790),#6018);-#13790 = PRESENTATION_STYLE_ASSIGNMENT((#13791));-#13791 = SURFACE_STYLE_USAGE(.BOTH.,#13792);-#13792 = SURFACE_SIDE_STYLE('',(#13793));-#13793 = SURFACE_STYLE_FILL_AREA(#13794);-#13794 = FILL_AREA_STYLE('',(#13795));-#13795 = FILL_AREA_STYLE_COLOUR('',#13655);-#13796 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(- #13797),#359);-#13797 = STYLED_ITEM('color',(#13798),#68);-#13798 = PRESENTATION_STYLE_ASSIGNMENT((#13799));-#13799 = SURFACE_STYLE_USAGE(.BOTH.,#13800);-#13800 = SURFACE_SIDE_STYLE('',(#13801));-#13801 = SURFACE_STYLE_FILL_AREA(#13802);-#13802 = FILL_AREA_STYLE('',(#13803));-#13803 = FILL_AREA_STYLE_COLOUR('',#13804);-#13804 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#13655 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#13656 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #13657,#13665,#13672,#13679,#13686,#13693,#13700,#13707,#13714,+ #13721,#13728,#13735,#13742,#13749,#13756,#13763,#13770,#13777,+ #13784,#13791,#13798),#6168);+#13657 = STYLED_ITEM('color',(#13658),#378);+#13658 = PRESENTATION_STYLE_ASSIGNMENT((#13659));+#13659 = SURFACE_STYLE_USAGE(.BOTH.,#13660);+#13660 = SURFACE_SIDE_STYLE('',(#13661));+#13661 = SURFACE_STYLE_FILL_AREA(#13662);+#13662 = FILL_AREA_STYLE('',(#13663));+#13663 = FILL_AREA_STYLE_COLOUR('',#13664);+#13664 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#13665 = STYLED_ITEM('color',(#13666),#660);+#13666 = PRESENTATION_STYLE_ASSIGNMENT((#13667));+#13667 = SURFACE_STYLE_USAGE(.BOTH.,#13668);+#13668 = SURFACE_SIDE_STYLE('',(#13669));+#13669 = SURFACE_STYLE_FILL_AREA(#13670);+#13670 = FILL_AREA_STYLE('',(#13671));+#13671 = FILL_AREA_STYLE_COLOUR('',#13664);+#13672 = STYLED_ITEM('color',(#13673),#942);+#13673 = PRESENTATION_STYLE_ASSIGNMENT((#13674));+#13674 = SURFACE_STYLE_USAGE(.BOTH.,#13675);+#13675 = SURFACE_SIDE_STYLE('',(#13676));+#13676 = SURFACE_STYLE_FILL_AREA(#13677);+#13677 = FILL_AREA_STYLE('',(#13678));+#13678 = FILL_AREA_STYLE_COLOUR('',#13664);+#13679 = STYLED_ITEM('color',(#13680),#1224);+#13680 = PRESENTATION_STYLE_ASSIGNMENT((#13681));+#13681 = SURFACE_STYLE_USAGE(.BOTH.,#13682);+#13682 = SURFACE_SIDE_STYLE('',(#13683));+#13683 = SURFACE_STYLE_FILL_AREA(#13684);+#13684 = FILL_AREA_STYLE('',(#13685));+#13685 = FILL_AREA_STYLE_COLOUR('',#13664);+#13686 = STYLED_ITEM('color',(#13687),#1506);+#13687 = PRESENTATION_STYLE_ASSIGNMENT((#13688));+#13688 = SURFACE_STYLE_USAGE(.BOTH.,#13689);+#13689 = SURFACE_SIDE_STYLE('',(#13690));+#13690 = SURFACE_STYLE_FILL_AREA(#13691);+#13691 = FILL_AREA_STYLE('',(#13692));+#13692 = FILL_AREA_STYLE_COLOUR('',#13664);+#13693 = STYLED_ITEM('color',(#13694),#1788);+#13694 = PRESENTATION_STYLE_ASSIGNMENT((#13695));+#13695 = SURFACE_STYLE_USAGE(.BOTH.,#13696);+#13696 = SURFACE_SIDE_STYLE('',(#13697));+#13697 = SURFACE_STYLE_FILL_AREA(#13698);+#13698 = FILL_AREA_STYLE('',(#13699));+#13699 = FILL_AREA_STYLE_COLOUR('',#13664);+#13700 = STYLED_ITEM('color',(#13701),#2070);+#13701 = PRESENTATION_STYLE_ASSIGNMENT((#13702));+#13702 = SURFACE_STYLE_USAGE(.BOTH.,#13703);+#13703 = SURFACE_SIDE_STYLE('',(#13704));+#13704 = SURFACE_STYLE_FILL_AREA(#13705);+#13705 = FILL_AREA_STYLE('',(#13706));+#13706 = FILL_AREA_STYLE_COLOUR('',#13664);+#13707 = STYLED_ITEM('color',(#13708),#2352);+#13708 = PRESENTATION_STYLE_ASSIGNMENT((#13709));+#13709 = SURFACE_STYLE_USAGE(.BOTH.,#13710);+#13710 = SURFACE_SIDE_STYLE('',(#13711));+#13711 = SURFACE_STYLE_FILL_AREA(#13712);+#13712 = FILL_AREA_STYLE('',(#13713));+#13713 = FILL_AREA_STYLE_COLOUR('',#13664);+#13714 = STYLED_ITEM('color',(#13715),#2634);+#13715 = PRESENTATION_STYLE_ASSIGNMENT((#13716));+#13716 = SURFACE_STYLE_USAGE(.BOTH.,#13717);+#13717 = SURFACE_SIDE_STYLE('',(#13718));+#13718 = SURFACE_STYLE_FILL_AREA(#13719);+#13719 = FILL_AREA_STYLE('',(#13720));+#13720 = FILL_AREA_STYLE_COLOUR('',#13664);+#13721 = STYLED_ITEM('color',(#13722),#2916);+#13722 = PRESENTATION_STYLE_ASSIGNMENT((#13723));+#13723 = SURFACE_STYLE_USAGE(.BOTH.,#13724);+#13724 = SURFACE_SIDE_STYLE('',(#13725));+#13725 = SURFACE_STYLE_FILL_AREA(#13726);+#13726 = FILL_AREA_STYLE('',(#13727));+#13727 = FILL_AREA_STYLE_COLOUR('',#13664);+#13728 = STYLED_ITEM('color',(#13729),#3198);+#13729 = PRESENTATION_STYLE_ASSIGNMENT((#13730));+#13730 = SURFACE_STYLE_USAGE(.BOTH.,#13731);+#13731 = SURFACE_SIDE_STYLE('',(#13732));+#13732 = SURFACE_STYLE_FILL_AREA(#13733);+#13733 = FILL_AREA_STYLE('',(#13734));+#13734 = FILL_AREA_STYLE_COLOUR('',#13664);+#13735 = STYLED_ITEM('color',(#13736),#3480);+#13736 = PRESENTATION_STYLE_ASSIGNMENT((#13737));+#13737 = SURFACE_STYLE_USAGE(.BOTH.,#13738);+#13738 = SURFACE_SIDE_STYLE('',(#13739));+#13739 = SURFACE_STYLE_FILL_AREA(#13740);+#13740 = FILL_AREA_STYLE('',(#13741));+#13741 = FILL_AREA_STYLE_COLOUR('',#13664);+#13742 = STYLED_ITEM('color',(#13743),#3762);+#13743 = PRESENTATION_STYLE_ASSIGNMENT((#13744));+#13744 = SURFACE_STYLE_USAGE(.BOTH.,#13745);+#13745 = SURFACE_SIDE_STYLE('',(#13746));+#13746 = SURFACE_STYLE_FILL_AREA(#13747);+#13747 = FILL_AREA_STYLE('',(#13748));+#13748 = FILL_AREA_STYLE_COLOUR('',#13664);+#13749 = STYLED_ITEM('color',(#13750),#4044);+#13750 = PRESENTATION_STYLE_ASSIGNMENT((#13751));+#13751 = SURFACE_STYLE_USAGE(.BOTH.,#13752);+#13752 = SURFACE_SIDE_STYLE('',(#13753));+#13753 = SURFACE_STYLE_FILL_AREA(#13754);+#13754 = FILL_AREA_STYLE('',(#13755));+#13755 = FILL_AREA_STYLE_COLOUR('',#13664);+#13756 = STYLED_ITEM('color',(#13757),#4326);+#13757 = PRESENTATION_STYLE_ASSIGNMENT((#13758));+#13758 = SURFACE_STYLE_USAGE(.BOTH.,#13759);+#13759 = SURFACE_SIDE_STYLE('',(#13760));+#13760 = SURFACE_STYLE_FILL_AREA(#13761);+#13761 = FILL_AREA_STYLE('',(#13762));+#13762 = FILL_AREA_STYLE_COLOUR('',#13664);+#13763 = STYLED_ITEM('color',(#13764),#4608);+#13764 = PRESENTATION_STYLE_ASSIGNMENT((#13765));+#13765 = SURFACE_STYLE_USAGE(.BOTH.,#13766);+#13766 = SURFACE_SIDE_STYLE('',(#13767));+#13767 = SURFACE_STYLE_FILL_AREA(#13768);+#13768 = FILL_AREA_STYLE('',(#13769));+#13769 = FILL_AREA_STYLE_COLOUR('',#13664);+#13770 = STYLED_ITEM('color',(#13771),#4890);+#13771 = PRESENTATION_STYLE_ASSIGNMENT((#13772));+#13772 = SURFACE_STYLE_USAGE(.BOTH.,#13773);+#13773 = SURFACE_SIDE_STYLE('',(#13774));+#13774 = SURFACE_STYLE_FILL_AREA(#13775);+#13775 = FILL_AREA_STYLE('',(#13776));+#13776 = FILL_AREA_STYLE_COLOUR('',#13664);+#13777 = STYLED_ITEM('color',(#13778),#5172);+#13778 = PRESENTATION_STYLE_ASSIGNMENT((#13779));+#13779 = SURFACE_STYLE_USAGE(.BOTH.,#13780);+#13780 = SURFACE_SIDE_STYLE('',(#13781));+#13781 = SURFACE_STYLE_FILL_AREA(#13782);+#13782 = FILL_AREA_STYLE('',(#13783));+#13783 = FILL_AREA_STYLE_COLOUR('',#13664);+#13784 = STYLED_ITEM('color',(#13785),#5454);+#13785 = PRESENTATION_STYLE_ASSIGNMENT((#13786));+#13786 = SURFACE_STYLE_USAGE(.BOTH.,#13787);+#13787 = SURFACE_SIDE_STYLE('',(#13788));+#13788 = SURFACE_STYLE_FILL_AREA(#13789);+#13789 = FILL_AREA_STYLE('',(#13790));+#13790 = FILL_AREA_STYLE_COLOUR('',#13664);+#13791 = STYLED_ITEM('color',(#13792),#5736);+#13792 = PRESENTATION_STYLE_ASSIGNMENT((#13793));+#13793 = SURFACE_STYLE_USAGE(.BOTH.,#13794);+#13794 = SURFACE_SIDE_STYLE('',(#13795));+#13795 = SURFACE_STYLE_FILL_AREA(#13796);+#13796 = FILL_AREA_STYLE('',(#13797));+#13797 = FILL_AREA_STYLE_COLOUR('',#13664);+#13798 = STYLED_ITEM('color',(#13799),#6018);+#13799 = PRESENTATION_STYLE_ASSIGNMENT((#13800));+#13800 = SURFACE_STYLE_USAGE(.BOTH.,#13801);+#13801 = SURFACE_SIDE_STYLE('',(#13802));+#13802 = SURFACE_STYLE_FILL_AREA(#13803);+#13803 = FILL_AREA_STYLE('',(#13804));+#13804 = FILL_AREA_STYLE_COLOUR('',#13664); ENDSEC; END-ISO-10303-21;
tps61194pwpr.glb⋯ 1 unchanged line ⋯
tps61194pwpr.kicad_sym+3−3@@ -16,7 +16,7 @@ (name "LDO" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) )- (pin input line (at -17.78 7.62 0) (length 5.08)+ (pin passive line (at -17.78 7.62 0) (length 5.08) (name "FSET" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) )@@ -24,7 +24,7 @@ (name "VDDIO/EN" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at -17.78 2.54 0) (length 5.08)+ (pin output line (at -17.78 2.54 0) (length 5.08) (name "FAULT" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) )@@ -44,7 +44,7 @@ (name "GND" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) )- (pin input line (at -17.78 -10.16 0) (length 5.08)+ (pin passive line (at -17.78 -10.16 0) (length 5.08) (name "ISET" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) )
tps61194pwpr.lbr+3−3@@ -103,14 +103,14 @@ <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">>VALUE</text> <pin name="VIN" x="-17.78" y="12.7" length="middle" direction="pwr"/> <pin name="LDO" x="-17.78" y="10.16" length="middle" direction="out"/>- <pin name="FSET" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="FSET" x="-17.78" y="7.62" length="middle" direction="pas"/> <pin name="VDDIO/EN" x="-17.78" y="5.08" length="middle" direction="pwr"/>- <pin name="FAULT" x="-17.78" y="2.54" length="middle" direction="hiz"/>+ <pin name="FAULT" x="-17.78" y="2.54" length="middle" direction="out"/> <pin name="SYNC" x="-17.78" y="0" length="middle" direction="in"/> <pin name="PWM" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="NC" x="-17.78" y="-5.08" length="middle" direction="io"/> <pin name="GND" x="-17.78" y="-7.62" length="middle" direction="pwr"/>- <pin name="ISET" x="-17.78" y="-10.16" length="middle" direction="in"/>+ <pin name="ISET" x="-17.78" y="-10.16" length="middle" direction="pas"/> <pin name="GND@2" x="-17.78" y="-12.7" length="middle" direction="pwr"/> <pin name="EP" x="17.78" y="10.16" length="middle" direction="pas" rot="R180"/> <pin name="VIN@2" x="17.78" y="7.62" length="middle" direction="pwr" rot="R180"/>
tps61194pwpr.step+7382−7391@@ -1,8 +1,8 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-10-01T18:02:49',('Author'),(- 'Open CASCADE'),'Open CASCADE STEP processor 7.8','Open CASCADE 7.8'+FILE_NAME('Open CASCADE Shape Model','2026-10-01T18:26:36',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); ENDSEC;@@ -43,7 +43,7 @@ GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#31)) GLOBAL_UNIT_ASSIGNED_CONTEXT( #28 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); #29 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); #30 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#31 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#28,+#31 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-06),#28, 'distance_accuracy_value','confusion accuracy'); #32 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); #33 = SHAPE_DEFINITION_REPRESENTATION(#34,#40);@@ -801,7 +801,7 @@ GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#685)) GLOBAL_UNIT_ASSIGNED_CONTEXT #682 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); #683 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); #684 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#685 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#682,+#685 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-05),#682, 'distance_accuracy_value','confusion accuracy'); #686 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#687,#689); #687 = ( REPRESENTATION_RELATIONSHIP('','',#40,#10) @@ -823,8 +823,8 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #4552,#5194,#5836,#6478,#7120,#7762,#8404,#9046,#9688,#10330,#10972, #11614,#12256,#12898,#13540),#13870); #700 = MANIFOLD_SOLID_BREP('',#701);-#701 = CLOSED_SHELL('',(#702,#822,#898,#974,#1108,#1157,#1206,#1281,- #1308,#1335));+#701 = CLOSED_SHELL('',(#702,#822,#1010,#1081,#1130,#1179,#1228,#1277,+ #1304,#1335)); #702 = ADVANCED_FACE('',(#703),#717,.F.); #703 = FACE_BOUND('',#704,.F.); #704 = EDGE_LOOP('',(#705,#740,#768,#796));@@ -961,609 +961,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#822 = ADVANCED_FACE('',(#823),#729,.F.);+#822 = ADVANCED_FACE('',(#823),#811,.F.); #823 = FACE_BOUND('',#824,.F.);-#824 = EDGE_LOOP('',(#825,#855,#876,#877));-#825 = ORIENTED_EDGE('',*,*,#826,.F.);-#826 = EDGE_CURVE('',#827,#829,#831,.T.);-#827 = VERTEX_POINT('',#828);-#828 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#829 = VERTEX_POINT('',#830);-#830 = CARTESIAN_POINT('',(-2.15,3.075,0.445));-#831 = SURFACE_CURVE('',#832,(#836,#843),.PCURVE_S1.);-#832 = LINE('',#833,#834);-#833 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#834 = VECTOR('',#835,1.);-#835 = DIRECTION('',(0.,1.,0.));-#836 = PCURVE('',#729,#837);-#837 = DEFINITIONAL_REPRESENTATION('',(#838),#842);-#838 = LINE('',#839,#840);-#839 = CARTESIAN_POINT('',(0.,-0.15));-#840 = VECTOR('',#841,1.);-#841 = DIRECTION('',(0.,1.));-#842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#843 = PCURVE('',#844,#849);-#844 = PLANE('',#845);-#845 = AXIS2_PLACEMENT_3D('',#846,#847,#848);-#846 = CARTESIAN_POINT('',(-2.2,2.925,0.445));-#847 = DIRECTION('',(-0.,0.,1.));-#848 = DIRECTION('',(1.,0.,0.));-#849 = DEFINITIONAL_REPRESENTATION('',(#850),#854);-#850 = LINE('',#851,#852);-#851 = CARTESIAN_POINT('',(5.E-02,-0.15));-#852 = VECTOR('',#853,1.);-#853 = DIRECTION('',(0.,1.));-#854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#855 = ORIENTED_EDGE('',*,*,#856,.T.);-#856 = EDGE_CURVE('',#827,#707,#857,.T.);-#857 = SURFACE_CURVE('',#858,(#862,#869),.PCURVE_S1.);-#858 = LINE('',#859,#860);-#859 = CARTESIAN_POINT('',(-2.15,2.775,0.445));-#860 = VECTOR('',#861,1.);-#861 = DIRECTION('',(0.,0.,1.));-#862 = PCURVE('',#729,#863);-#863 = DEFINITIONAL_REPRESENTATION('',(#864),#868);-#864 = LINE('',#865,#866);-#865 = CARTESIAN_POINT('',(0.,-0.15));-#866 = VECTOR('',#867,1.);-#867 = DIRECTION('',(1.,0.));-#868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#869 = PCURVE('',#757,#870);-#870 = DEFINITIONAL_REPRESENTATION('',(#871),#875);-#871 = LINE('',#872,#873);-#872 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#873 = VECTOR('',#874,1.);-#874 = DIRECTION('',(-1.,0.));-#875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#876 = ORIENTED_EDGE('',*,*,#706,.T.);-#877 = ORIENTED_EDGE('',*,*,#878,.F.);-#878 = EDGE_CURVE('',#829,#709,#879,.T.);-#879 = SURFACE_CURVE('',#880,(#884,#891),.PCURVE_S1.);-#880 = LINE('',#881,#882);-#881 = CARTESIAN_POINT('',(-2.15,3.075,0.445));-#882 = VECTOR('',#883,1.);-#883 = DIRECTION('',(0.,0.,1.));-#884 = PCURVE('',#729,#885);-#885 = DEFINITIONAL_REPRESENTATION('',(#886),#890);-#886 = LINE('',#887,#888);-#887 = CARTESIAN_POINT('',(0.,0.15));-#888 = VECTOR('',#889,1.);-#889 = DIRECTION('',(1.,0.));-#890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#891 = PCURVE('',#811,#892);-#892 = DEFINITIONAL_REPRESENTATION('',(#893),#897);-#893 = LINE('',#894,#895);-#894 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#895 = VECTOR('',#896,1.);-#896 = DIRECTION('',(-1.,0.));-#897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#898 = ADVANCED_FACE('',(#899),#785,.F.);-#899 = FACE_BOUND('',#900,.F.);-#900 = EDGE_LOOP('',(#901,#924,#952,#973));-#901 = ORIENTED_EDGE('',*,*,#902,.T.);-#902 = EDGE_CURVE('',#742,#903,#905,.T.);-#903 = VERTEX_POINT('',#904);-#904 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));-#905 = SURFACE_CURVE('',#906,(#910,#917),.PCURVE_S1.);-#906 = LINE('',#907,#908);-#907 = CARTESIAN_POINT('',(-2.35,2.775,0.595));-#908 = VECTOR('',#909,1.);-#909 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#910 = PCURVE('',#785,#911);-#911 = DEFINITIONAL_REPRESENTATION('',(#912),#916);-#912 = LINE('',#913,#914);-#913 = CARTESIAN_POINT('',(-0.,-0.15));-#914 = VECTOR('',#915,1.);-#915 = DIRECTION('',(1.,0.));-#916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#917 = PCURVE('',#757,#918);-#918 = DEFINITIONAL_REPRESENTATION('',(#919),#923);-#919 = LINE('',#920,#921);-#920 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#921 = VECTOR('',#922,1.);-#922 = DIRECTION('',(0.839949759337,-0.542664170358));-#923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#924 = ORIENTED_EDGE('',*,*,#925,.F.);-#925 = EDGE_CURVE('',#926,#903,#928,.T.);-#926 = VERTEX_POINT('',#927);-#927 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));-#928 = SURFACE_CURVE('',#929,(#933,#940),.PCURVE_S1.);-#929 = LINE('',#930,#931);-#930 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));-#931 = VECTOR('',#932,1.);-#932 = DIRECTION('',(0.,-1.,0.));-#933 = PCURVE('',#785,#934);-#934 = DEFINITIONAL_REPRESENTATION('',(#935),#939);-#935 = LINE('',#936,#937);-#936 = CARTESIAN_POINT('',(0.529793591883,0.15));-#937 = VECTOR('',#938,1.);-#938 = DIRECTION('',(-0.,-1.));-#939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#940 = PCURVE('',#941,#946);-#941 = PLANE('',#942);-#942 = AXIS2_PLACEMENT_3D('',#943,#944,#945);-#943 = CARTESIAN_POINT('',(-2.6375,2.925,0.15));-#944 = DIRECTION('',(-0.,-0.,-1.));-#945 = DIRECTION('',(-1.,0.,0.));-#946 = DEFINITIONAL_REPRESENTATION('',(#947),#951);-#947 = LINE('',#948,#949);-#948 = CARTESIAN_POINT('',(0.,0.15));-#949 = VECTOR('',#950,1.);-#950 = DIRECTION('',(0.,-1.));-#951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#952 = ORIENTED_EDGE('',*,*,#953,.F.);-#953 = EDGE_CURVE('',#770,#926,#954,.T.);-#954 = SURFACE_CURVE('',#955,(#959,#966),.PCURVE_S1.);-#955 = LINE('',#956,#957);-#956 = CARTESIAN_POINT('',(-2.35,3.075,0.595));-#957 = VECTOR('',#958,1.);-#958 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#959 = PCURVE('',#785,#960);-#960 = DEFINITIONAL_REPRESENTATION('',(#961),#965);-#961 = LINE('',#962,#963);-#962 = CARTESIAN_POINT('',(0.,0.15));-#963 = VECTOR('',#964,1.);-#964 = DIRECTION('',(1.,0.));-#965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#966 = PCURVE('',#811,#967);-#967 = DEFINITIONAL_REPRESENTATION('',(#968),#972);-#968 = LINE('',#969,#970);-#969 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#970 = VECTOR('',#971,1.);-#971 = DIRECTION('',(0.839949759337,-0.542664170358));-#972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#973 = ORIENTED_EDGE('',*,*,#769,.T.);-#974 = ADVANCED_FACE('',(#975),#757,.T.);-#975 = FACE_BOUND('',#976,.T.);-#976 = EDGE_LOOP('',(#977,#978,#979,#1002,#1030,#1058,#1086,#1107));-#977 = ORIENTED_EDGE('',*,*,#741,.T.);-#978 = ORIENTED_EDGE('',*,*,#902,.T.);-#979 = ORIENTED_EDGE('',*,*,#980,.T.);-#980 = EDGE_CURVE('',#903,#981,#983,.T.);-#981 = VERTEX_POINT('',#982);-#982 = CARTESIAN_POINT('',(-3.205,2.775,0.15));-#983 = SURFACE_CURVE('',#984,(#988,#995),.PCURVE_S1.);+#824 = EDGE_LOOP('',(#825,#826,#849,#877,#905,#933,#961,#989));+#825 = ORIENTED_EDGE('',*,*,#797,.T.);+#826 = ORIENTED_EDGE('',*,*,#827,.T.);+#827 = EDGE_CURVE('',#770,#828,#830,.T.);+#828 = VERTEX_POINT('',#829);+#829 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#830 = SURFACE_CURVE('',#831,(#835,#842),.PCURVE_S1.);+#831 = LINE('',#832,#833);+#832 = CARTESIAN_POINT('',(-2.35,3.075,0.595));+#833 = VECTOR('',#834,1.);+#834 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#835 = PCURVE('',#811,#836);+#836 = DEFINITIONAL_REPRESENTATION('',(#837),#841);+#837 = LINE('',#838,#839);+#838 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#839 = VECTOR('',#840,1.);+#840 = DIRECTION('',(0.839949759337,-0.542664170358));+#841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#842 = PCURVE('',#785,#843);+#843 = DEFINITIONAL_REPRESENTATION('',(#844),#848);+#844 = LINE('',#845,#846);+#845 = CARTESIAN_POINT('',(0.,0.15));+#846 = VECTOR('',#847,1.);+#847 = DIRECTION('',(1.,0.));+#848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#849 = ORIENTED_EDGE('',*,*,#850,.T.);+#850 = EDGE_CURVE('',#828,#851,#853,.T.);+#851 = VERTEX_POINT('',#852);+#852 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#853 = SURFACE_CURVE('',#854,(#858,#865),.PCURVE_S1.);+#854 = LINE('',#855,#856);+#855 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#856 = VECTOR('',#857,1.);+#857 = DIRECTION('',(-1.,0.,0.));+#858 = PCURVE('',#811,#859);+#859 = DEFINITIONAL_REPRESENTATION('',(#860),#864);+#860 = LINE('',#861,#862);+#861 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#862 = VECTOR('',#863,1.);+#863 = DIRECTION('',(0.,-1.));+#864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#865 = PCURVE('',#866,#871);+#866 = PLANE('',#867);+#867 = AXIS2_PLACEMENT_3D('',#868,#869,#870);+#868 = CARTESIAN_POINT('',(-2.6375,2.925,0.15));+#869 = DIRECTION('',(-0.,-0.,-1.));+#870 = DIRECTION('',(-1.,0.,0.));+#871 = DEFINITIONAL_REPRESENTATION('',(#872),#876);+#872 = LINE('',#873,#874);+#873 = CARTESIAN_POINT('',(0.,0.15));+#874 = VECTOR('',#875,1.);+#875 = DIRECTION('',(1.,0.));+#876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#877 = ORIENTED_EDGE('',*,*,#878,.T.);+#878 = EDGE_CURVE('',#851,#879,#881,.T.);+#879 = VERTEX_POINT('',#880);+#880 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#881 = SURFACE_CURVE('',#882,(#886,#893),.PCURVE_S1.);+#882 = LINE('',#883,#884);+#883 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#884 = VECTOR('',#885,1.);+#885 = DIRECTION('',(0.,0.,-1.));+#886 = PCURVE('',#811,#887);+#887 = DEFINITIONAL_REPRESENTATION('',(#888),#892);+#888 = LINE('',#889,#890);+#889 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#890 = VECTOR('',#891,1.);+#891 = DIRECTION('',(1.,0.));+#892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#893 = PCURVE('',#894,#899);+#894 = PLANE('',#895);+#895 = AXIS2_PLACEMENT_3D('',#896,#897,#898);+#896 = CARTESIAN_POINT('',(-3.205,2.925,0.15));+#897 = DIRECTION('',(1.,0.,0.));+#898 = DIRECTION('',(0.,0.,-1.));+#899 = DEFINITIONAL_REPRESENTATION('',(#900),#904);+#900 = LINE('',#901,#902);+#901 = CARTESIAN_POINT('',(0.,0.15));+#902 = VECTOR('',#903,1.);+#903 = DIRECTION('',(1.,0.));+#904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#905 = ORIENTED_EDGE('',*,*,#906,.T.);+#906 = EDGE_CURVE('',#879,#907,#909,.T.);+#907 = VERTEX_POINT('',#908);+#908 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#909 = SURFACE_CURVE('',#910,(#914,#921),.PCURVE_S1.);+#910 = LINE('',#911,#912);+#911 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#912 = VECTOR('',#913,1.);+#913 = DIRECTION('',(1.,0.,0.));+#914 = PCURVE('',#811,#915);+#915 = DEFINITIONAL_REPRESENTATION('',(#916),#920);+#916 = LINE('',#917,#918);+#917 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#918 = VECTOR('',#919,1.);+#919 = DIRECTION('',(0.,1.));+#920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#921 = PCURVE('',#922,#927);+#922 = PLANE('',#923);+#923 = AXIS2_PLACEMENT_3D('',#924,#925,#926);+#924 = CARTESIAN_POINT('',(-3.205,2.925,0.));+#925 = DIRECTION('',(-0.,0.,1.));+#926 = DIRECTION('',(1.,0.,0.));+#927 = DEFINITIONAL_REPRESENTATION('',(#928),#932);+#928 = LINE('',#929,#930);+#929 = CARTESIAN_POINT('',(0.,0.15));+#930 = VECTOR('',#931,1.);+#931 = DIRECTION('',(1.,0.));+#932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#933 = ORIENTED_EDGE('',*,*,#934,.T.);+#934 = EDGE_CURVE('',#907,#935,#937,.T.);+#935 = VERTEX_POINT('',#936);+#936 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#937 = SURFACE_CURVE('',#938,(#942,#949),.PCURVE_S1.);+#938 = LINE('',#939,#940);+#939 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#940 = VECTOR('',#941,1.);+#941 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#942 = PCURVE('',#811,#943);+#943 = DEFINITIONAL_REPRESENTATION('',(#944),#948);+#944 = LINE('',#945,#946);+#945 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#946 = VECTOR('',#947,1.);+#947 = DIRECTION('',(-0.839949759337,0.542664170358));+#948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#949 = PCURVE('',#950,#955);+#950 = PLANE('',#951);+#951 = AXIS2_PLACEMENT_3D('',#952,#953,#954);+#952 = CARTESIAN_POINT('',(-2.4875,2.925,0.));+#953 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#954 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#955 = DEFINITIONAL_REPRESENTATION('',(#956),#960);+#956 = LINE('',#957,#958);+#957 = CARTESIAN_POINT('',(0.,0.15));+#958 = VECTOR('',#959,1.);+#959 = DIRECTION('',(1.,0.));+#960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#961 = ORIENTED_EDGE('',*,*,#962,.T.);+#962 = EDGE_CURVE('',#935,#963,#965,.T.);+#963 = VERTEX_POINT('',#964);+#964 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#965 = SURFACE_CURVE('',#966,(#970,#977),.PCURVE_S1.);+#966 = LINE('',#967,#968);+#967 = CARTESIAN_POINT('',(-2.2,3.075,0.445));+#968 = VECTOR('',#969,1.);+#969 = DIRECTION('',(1.,0.,0.));+#970 = PCURVE('',#811,#971);+#971 = DEFINITIONAL_REPRESENTATION('',(#972),#976);+#972 = LINE('',#973,#974);+#973 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#974 = VECTOR('',#975,1.);+#975 = DIRECTION('',(0.,1.));+#976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#977 = PCURVE('',#978,#983);+#978 = PLANE('',#979);+#979 = AXIS2_PLACEMENT_3D('',#980,#981,#982);+#980 = CARTESIAN_POINT('',(-2.2,2.925,0.445));+#981 = DIRECTION('',(-0.,0.,1.));+#982 = DIRECTION('',(1.,0.,0.));+#983 = DEFINITIONAL_REPRESENTATION('',(#984),#988); #984 = LINE('',#985,#986);-#985 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#985 = CARTESIAN_POINT('',(0.,0.15)); #986 = VECTOR('',#987,1.);-#987 = DIRECTION('',(-1.,0.,0.));-#988 = PCURVE('',#757,#989);-#989 = DEFINITIONAL_REPRESENTATION('',(#990),#994);-#990 = LINE('',#991,#992);-#991 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#992 = VECTOR('',#993,1.);-#993 = DIRECTION('',(0.,-1.));-#994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#995 = PCURVE('',#941,#996);-#996 = DEFINITIONAL_REPRESENTATION('',(#997),#1001);-#997 = LINE('',#998,#999);-#998 = CARTESIAN_POINT('',(0.,-0.15));-#999 = VECTOR('',#1000,1.);-#1000 = DIRECTION('',(1.,0.));-#1001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1002 = ORIENTED_EDGE('',*,*,#1003,.T.);-#1003 = EDGE_CURVE('',#981,#1004,#1006,.T.);-#1004 = VERTEX_POINT('',#1005);-#1005 = CARTESIAN_POINT('',(-3.205,2.775,0.));-#1006 = SURFACE_CURVE('',#1007,(#1011,#1018),.PCURVE_S1.);-#1007 = LINE('',#1008,#1009);-#1008 = CARTESIAN_POINT('',(-3.205,2.775,0.15));-#1009 = VECTOR('',#1010,1.);-#1010 = DIRECTION('',(0.,0.,-1.));-#1011 = PCURVE('',#757,#1012);-#1012 = DEFINITIONAL_REPRESENTATION('',(#1013),#1017);-#1013 = LINE('',#1014,#1015);-#1014 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#1015 = VECTOR('',#1016,1.);-#1016 = DIRECTION('',(1.,0.));-#1017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1018 = PCURVE('',#1019,#1024);-#1019 = PLANE('',#1020);-#1020 = AXIS2_PLACEMENT_3D('',#1021,#1022,#1023);-#1021 = CARTESIAN_POINT('',(-3.205,2.925,0.15));-#1022 = DIRECTION('',(1.,0.,0.));-#1023 = DIRECTION('',(0.,0.,-1.));-#1024 = DEFINITIONAL_REPRESENTATION('',(#1025),#1029);-#1025 = LINE('',#1026,#1027);-#1026 = CARTESIAN_POINT('',(0.,-0.15));-#1027 = VECTOR('',#1028,1.);-#1028 = DIRECTION('',(1.,0.));-#1029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1030 = ORIENTED_EDGE('',*,*,#1031,.T.);-#1031 = EDGE_CURVE('',#1004,#1032,#1034,.T.);-#1032 = VERTEX_POINT('',#1033);-#1033 = CARTESIAN_POINT('',(-2.4875,2.775,0.));-#1034 = SURFACE_CURVE('',#1035,(#1039,#1046),.PCURVE_S1.);-#1035 = LINE('',#1036,#1037);-#1036 = CARTESIAN_POINT('',(-3.205,2.775,0.));-#1037 = VECTOR('',#1038,1.);-#1038 = DIRECTION('',(1.,0.,0.));-#1039 = PCURVE('',#757,#1040);-#1040 = DEFINITIONAL_REPRESENTATION('',(#1041),#1045);+#987 = DIRECTION('',(1.,0.));+#988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#989 = ORIENTED_EDGE('',*,*,#990,.T.);+#990 = EDGE_CURVE('',#963,#709,#991,.T.);+#991 = SURFACE_CURVE('',#992,(#996,#1003),.PCURVE_S1.);+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(-2.15,3.075,0.445));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(0.,0.,1.));+#996 = PCURVE('',#811,#997);+#997 = DEFINITIONAL_REPRESENTATION('',(#998),#1002);+#998 = LINE('',#999,#1000);+#999 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1000 = VECTOR('',#1001,1.);+#1001 = DIRECTION('',(-1.,0.));+#1002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1003 = PCURVE('',#729,#1004);+#1004 = DEFINITIONAL_REPRESENTATION('',(#1005),#1009);+#1005 = LINE('',#1006,#1007);+#1006 = CARTESIAN_POINT('',(0.,0.15));+#1007 = VECTOR('',#1008,1.);+#1008 = DIRECTION('',(1.,0.));+#1009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1010 = ADVANCED_FACE('',(#1011),#978,.F.);+#1011 = FACE_BOUND('',#1012,.F.);+#1012 = EDGE_LOOP('',(#1013,#1036,#1059,#1080));+#1013 = ORIENTED_EDGE('',*,*,#1014,.F.);+#1014 = EDGE_CURVE('',#1015,#935,#1017,.T.);+#1015 = VERTEX_POINT('',#1016);+#1016 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#1017 = SURFACE_CURVE('',#1018,(#1022,#1029),.PCURVE_S1.);+#1018 = LINE('',#1019,#1020);+#1019 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#1020 = VECTOR('',#1021,1.);+#1021 = DIRECTION('',(0.,1.,0.));+#1022 = PCURVE('',#978,#1023);+#1023 = DEFINITIONAL_REPRESENTATION('',(#1024),#1028);+#1024 = LINE('',#1025,#1026);+#1025 = CARTESIAN_POINT('',(0.,-0.15));+#1026 = VECTOR('',#1027,1.);+#1027 = DIRECTION('',(0.,1.));+#1028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1029 = PCURVE('',#950,#1030);+#1030 = DEFINITIONAL_REPRESENTATION('',(#1031),#1035);+#1031 = LINE('',#1032,#1033);+#1032 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#1033 = VECTOR('',#1034,1.);+#1034 = DIRECTION('',(0.,1.));+#1035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1036 = ORIENTED_EDGE('',*,*,#1037,.T.);+#1037 = EDGE_CURVE('',#1015,#1038,#1040,.T.);+#1038 = VERTEX_POINT('',#1039);+#1039 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#1040 = SURFACE_CURVE('',#1041,(#1045,#1052),.PCURVE_S1.); #1041 = LINE('',#1042,#1043);-#1042 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1042 = CARTESIAN_POINT('',(-2.2,2.775,0.445)); #1043 = VECTOR('',#1044,1.);-#1044 = DIRECTION('',(0.,1.));-#1045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1046 = PCURVE('',#1047,#1052);-#1047 = PLANE('',#1048);-#1048 = AXIS2_PLACEMENT_3D('',#1049,#1050,#1051);-#1049 = CARTESIAN_POINT('',(-3.205,2.925,0.));-#1050 = DIRECTION('',(-0.,0.,1.));-#1051 = DIRECTION('',(1.,0.,0.));-#1052 = DEFINITIONAL_REPRESENTATION('',(#1053),#1057);-#1053 = LINE('',#1054,#1055);-#1054 = CARTESIAN_POINT('',(0.,-0.15));-#1055 = VECTOR('',#1056,1.);-#1056 = DIRECTION('',(1.,0.));-#1057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1058 = ORIENTED_EDGE('',*,*,#1059,.T.);-#1059 = EDGE_CURVE('',#1032,#1060,#1062,.T.);-#1060 = VERTEX_POINT('',#1061);-#1061 = CARTESIAN_POINT('',(-2.2,2.775,0.445));-#1062 = SURFACE_CURVE('',#1063,(#1067,#1074),.PCURVE_S1.);-#1063 = LINE('',#1064,#1065);-#1064 = CARTESIAN_POINT('',(-2.4875,2.775,0.));-#1065 = VECTOR('',#1066,1.);-#1066 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1067 = PCURVE('',#757,#1068);-#1068 = DEFINITIONAL_REPRESENTATION('',(#1069),#1073);-#1069 = LINE('',#1070,#1071);-#1070 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#1071 = VECTOR('',#1072,1.);-#1072 = DIRECTION('',(-0.839949759337,0.542664170358));-#1073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1074 = PCURVE('',#1075,#1080);-#1075 = PLANE('',#1076);-#1076 = AXIS2_PLACEMENT_3D('',#1077,#1078,#1079);-#1077 = CARTESIAN_POINT('',(-2.4875,2.925,0.));-#1078 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#1079 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1080 = DEFINITIONAL_REPRESENTATION('',(#1081),#1085);-#1081 = LINE('',#1082,#1083);-#1082 = CARTESIAN_POINT('',(0.,-0.15));-#1083 = VECTOR('',#1084,1.);-#1084 = DIRECTION('',(1.,0.));-#1085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1086 = ORIENTED_EDGE('',*,*,#1087,.T.);-#1087 = EDGE_CURVE('',#1060,#827,#1088,.T.);+#1044 = DIRECTION('',(1.,0.,0.));+#1045 = PCURVE('',#978,#1046);+#1046 = DEFINITIONAL_REPRESENTATION('',(#1047),#1051);+#1047 = LINE('',#1048,#1049);+#1048 = CARTESIAN_POINT('',(0.,-0.15));+#1049 = VECTOR('',#1050,1.);+#1050 = DIRECTION('',(1.,0.));+#1051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1052 = PCURVE('',#757,#1053);+#1053 = DEFINITIONAL_REPRESENTATION('',(#1054),#1058);+#1054 = LINE('',#1055,#1056);+#1055 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1056 = VECTOR('',#1057,1.);+#1057 = DIRECTION('',(0.,1.));+#1058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1059 = ORIENTED_EDGE('',*,*,#1060,.T.);+#1060 = EDGE_CURVE('',#1038,#963,#1061,.T.);+#1061 = SURFACE_CURVE('',#1062,(#1066,#1073),.PCURVE_S1.);+#1062 = LINE('',#1063,#1064);+#1063 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#1064 = VECTOR('',#1065,1.);+#1065 = DIRECTION('',(0.,1.,0.));+#1066 = PCURVE('',#978,#1067);+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(5.E-02,-0.15));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(0.,1.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = PCURVE('',#729,#1074);+#1074 = DEFINITIONAL_REPRESENTATION('',(#1075),#1079);+#1075 = LINE('',#1076,#1077);+#1076 = CARTESIAN_POINT('',(0.,-0.15));+#1077 = VECTOR('',#1078,1.);+#1078 = DIRECTION('',(0.,1.));+#1079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1080 = ORIENTED_EDGE('',*,*,#962,.F.);+#1081 = ADVANCED_FACE('',(#1082),#950,.F.);+#1082 = FACE_BOUND('',#1083,.F.);+#1083 = EDGE_LOOP('',(#1084,#1107,#1108,#1109));+#1084 = ORIENTED_EDGE('',*,*,#1085,.T.);+#1085 = EDGE_CURVE('',#1086,#1015,#1088,.T.);+#1086 = VERTEX_POINT('',#1087);+#1087 = CARTESIAN_POINT('',(-2.4875,2.775,0.)); #1088 = SURFACE_CURVE('',#1089,(#1093,#1100),.PCURVE_S1.); #1089 = LINE('',#1090,#1091);-#1090 = CARTESIAN_POINT('',(-2.2,2.775,0.445));+#1090 = CARTESIAN_POINT('',(-2.4875,2.775,0.)); #1091 = VECTOR('',#1092,1.);-#1092 = DIRECTION('',(1.,0.,0.));-#1093 = PCURVE('',#757,#1094);+#1092 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1093 = PCURVE('',#950,#1094); #1094 = DEFINITIONAL_REPRESENTATION('',(#1095),#1099); #1095 = LINE('',#1096,#1097);-#1096 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1096 = CARTESIAN_POINT('',(0.,-0.15)); #1097 = VECTOR('',#1098,1.);-#1098 = DIRECTION('',(0.,1.));+#1098 = DIRECTION('',(1.,0.)); #1099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1100 = PCURVE('',#844,#1101);+#1100 = PCURVE('',#757,#1101); #1101 = DEFINITIONAL_REPRESENTATION('',(#1102),#1106); #1102 = LINE('',#1103,#1104);-#1103 = CARTESIAN_POINT('',(0.,-0.15));+#1103 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #1104 = VECTOR('',#1105,1.);-#1105 = DIRECTION('',(1.,0.));+#1105 = DIRECTION('',(-0.839949759337,0.542664170358)); #1106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1107 = ORIENTED_EDGE('',*,*,#856,.T.);-#1108 = ADVANCED_FACE('',(#1109),#844,.F.);-#1109 = FACE_BOUND('',#1110,.F.);-#1110 = EDGE_LOOP('',(#1111,#1134,#1135,#1136));-#1111 = ORIENTED_EDGE('',*,*,#1112,.F.);-#1112 = EDGE_CURVE('',#1060,#1113,#1115,.T.);-#1113 = VERTEX_POINT('',#1114);-#1114 = CARTESIAN_POINT('',(-2.2,3.075,0.445));-#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.);-#1116 = LINE('',#1117,#1118);-#1117 = CARTESIAN_POINT('',(-2.2,2.775,0.445));-#1118 = VECTOR('',#1119,1.);-#1119 = DIRECTION('',(0.,1.,0.));-#1120 = PCURVE('',#844,#1121);-#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);-#1122 = LINE('',#1123,#1124);-#1123 = CARTESIAN_POINT('',(0.,-0.15));-#1124 = VECTOR('',#1125,1.);-#1125 = DIRECTION('',(0.,1.));-#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1127 = PCURVE('',#1075,#1128);-#1128 = DEFINITIONAL_REPRESENTATION('',(#1129),#1133);-#1129 = LINE('',#1130,#1131);-#1130 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#1131 = VECTOR('',#1132,1.);-#1132 = DIRECTION('',(0.,1.));-#1133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1134 = ORIENTED_EDGE('',*,*,#1087,.T.);-#1135 = ORIENTED_EDGE('',*,*,#826,.T.);-#1136 = ORIENTED_EDGE('',*,*,#1137,.F.);-#1137 = EDGE_CURVE('',#1113,#829,#1138,.T.);-#1138 = SURFACE_CURVE('',#1139,(#1143,#1150),.PCURVE_S1.);-#1139 = LINE('',#1140,#1141);-#1140 = CARTESIAN_POINT('',(-2.2,3.075,0.445));-#1141 = VECTOR('',#1142,1.);-#1142 = DIRECTION('',(1.,0.,0.));-#1143 = PCURVE('',#844,#1144);-#1144 = DEFINITIONAL_REPRESENTATION('',(#1145),#1149);-#1145 = LINE('',#1146,#1147);-#1146 = CARTESIAN_POINT('',(0.,0.15));-#1147 = VECTOR('',#1148,1.);-#1148 = DIRECTION('',(1.,0.));-#1149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1150 = PCURVE('',#811,#1151);-#1151 = DEFINITIONAL_REPRESENTATION('',(#1152),#1156);-#1152 = LINE('',#1153,#1154);-#1153 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#1154 = VECTOR('',#1155,1.);-#1155 = DIRECTION('',(0.,1.));-#1156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1157 = ADVANCED_FACE('',(#1158),#941,.F.);-#1158 = FACE_BOUND('',#1159,.F.);-#1159 = EDGE_LOOP('',(#1160,#1161,#1184,#1205));-#1160 = ORIENTED_EDGE('',*,*,#980,.T.);-#1161 = ORIENTED_EDGE('',*,*,#1162,.F.);-#1162 = EDGE_CURVE('',#1163,#981,#1165,.T.);-#1163 = VERTEX_POINT('',#1164);-#1164 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#1165 = SURFACE_CURVE('',#1166,(#1170,#1177),.PCURVE_S1.);-#1166 = LINE('',#1167,#1168);-#1167 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#1168 = VECTOR('',#1169,1.);-#1169 = DIRECTION('',(0.,-1.,0.));-#1170 = PCURVE('',#941,#1171);-#1171 = DEFINITIONAL_REPRESENTATION('',(#1172),#1176);-#1172 = LINE('',#1173,#1174);-#1173 = CARTESIAN_POINT('',(0.5675,0.15));-#1174 = VECTOR('',#1175,1.);-#1175 = DIRECTION('',(0.,-1.));-#1176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1177 = PCURVE('',#1019,#1178);-#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);-#1179 = LINE('',#1180,#1181);-#1180 = CARTESIAN_POINT('',(0.,0.15));-#1181 = VECTOR('',#1182,1.);-#1182 = DIRECTION('',(0.,-1.));-#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1184 = ORIENTED_EDGE('',*,*,#1185,.F.);-#1185 = EDGE_CURVE('',#926,#1163,#1186,.T.);+#1107 = ORIENTED_EDGE('',*,*,#1014,.T.);+#1108 = ORIENTED_EDGE('',*,*,#934,.F.);+#1109 = ORIENTED_EDGE('',*,*,#1110,.T.);+#1110 = EDGE_CURVE('',#907,#1086,#1111,.T.);+#1111 = SURFACE_CURVE('',#1112,(#1116,#1123),.PCURVE_S1.);+#1112 = LINE('',#1113,#1114);+#1113 = CARTESIAN_POINT('',(-2.4875,3.075,0.));+#1114 = VECTOR('',#1115,1.);+#1115 = DIRECTION('',(0.,-1.,0.));+#1116 = PCURVE('',#950,#1117);+#1117 = DEFINITIONAL_REPRESENTATION('',(#1118),#1122);+#1118 = LINE('',#1119,#1120);+#1119 = CARTESIAN_POINT('',(0.,0.15));+#1120 = VECTOR('',#1121,1.);+#1121 = DIRECTION('',(0.,-1.));+#1122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1123 = PCURVE('',#922,#1124);+#1124 = DEFINITIONAL_REPRESENTATION('',(#1125),#1129);+#1125 = LINE('',#1126,#1127);+#1126 = CARTESIAN_POINT('',(0.7175,0.15));+#1127 = VECTOR('',#1128,1.);+#1128 = DIRECTION('',(0.,-1.));+#1129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1130 = ADVANCED_FACE('',(#1131),#922,.F.);+#1131 = FACE_BOUND('',#1132,.F.);+#1132 = EDGE_LOOP('',(#1133,#1156,#1157,#1158));+#1133 = ORIENTED_EDGE('',*,*,#1134,.T.);+#1134 = EDGE_CURVE('',#1135,#1086,#1137,.T.);+#1135 = VERTEX_POINT('',#1136);+#1136 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#1137 = SURFACE_CURVE('',#1138,(#1142,#1149),.PCURVE_S1.);+#1138 = LINE('',#1139,#1140);+#1139 = CARTESIAN_POINT('',(-3.205,2.775,0.));+#1140 = VECTOR('',#1141,1.);+#1141 = DIRECTION('',(1.,0.,0.));+#1142 = PCURVE('',#922,#1143);+#1143 = DEFINITIONAL_REPRESENTATION('',(#1144),#1148);+#1144 = LINE('',#1145,#1146);+#1145 = CARTESIAN_POINT('',(0.,-0.15));+#1146 = VECTOR('',#1147,1.);+#1147 = DIRECTION('',(1.,0.));+#1148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1149 = PCURVE('',#757,#1150);+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(0.,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ORIENTED_EDGE('',*,*,#1110,.F.);+#1157 = ORIENTED_EDGE('',*,*,#906,.F.);+#1158 = ORIENTED_EDGE('',*,*,#1159,.T.);+#1159 = EDGE_CURVE('',#879,#1135,#1160,.T.);+#1160 = SURFACE_CURVE('',#1161,(#1165,#1172),.PCURVE_S1.);+#1161 = LINE('',#1162,#1163);+#1162 = CARTESIAN_POINT('',(-3.205,3.075,0.));+#1163 = VECTOR('',#1164,1.);+#1164 = DIRECTION('',(0.,-1.,0.));+#1165 = PCURVE('',#922,#1166);+#1166 = DEFINITIONAL_REPRESENTATION('',(#1167),#1171);+#1167 = LINE('',#1168,#1169);+#1168 = CARTESIAN_POINT('',(0.,0.15));+#1169 = VECTOR('',#1170,1.);+#1170 = DIRECTION('',(0.,-1.));+#1171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1172 = PCURVE('',#894,#1173);+#1173 = DEFINITIONAL_REPRESENTATION('',(#1174),#1178);+#1174 = LINE('',#1175,#1176);+#1175 = CARTESIAN_POINT('',(0.15,0.15));+#1176 = VECTOR('',#1177,1.);+#1177 = DIRECTION('',(0.,-1.));+#1178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1179 = ADVANCED_FACE('',(#1180),#894,.F.);+#1180 = FACE_BOUND('',#1181,.F.);+#1181 = EDGE_LOOP('',(#1182,#1205,#1206,#1207));+#1182 = ORIENTED_EDGE('',*,*,#1183,.T.);+#1183 = EDGE_CURVE('',#1184,#1135,#1186,.T.);+#1184 = VERTEX_POINT('',#1185);+#1185 = CARTESIAN_POINT('',(-3.205,2.775,0.15)); #1186 = SURFACE_CURVE('',#1187,(#1191,#1198),.PCURVE_S1.); #1187 = LINE('',#1188,#1189);-#1188 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#1188 = CARTESIAN_POINT('',(-3.205,2.775,0.15)); #1189 = VECTOR('',#1190,1.);-#1190 = DIRECTION('',(-1.,0.,0.));-#1191 = PCURVE('',#941,#1192);+#1190 = DIRECTION('',(0.,0.,-1.));+#1191 = PCURVE('',#894,#1192); #1192 = DEFINITIONAL_REPRESENTATION('',(#1193),#1197); #1193 = LINE('',#1194,#1195);-#1194 = CARTESIAN_POINT('',(0.,0.15));+#1194 = CARTESIAN_POINT('',(0.,-0.15)); #1195 = VECTOR('',#1196,1.); #1196 = DIRECTION('',(1.,0.)); #1197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1198 = PCURVE('',#811,#1199);+#1198 = PCURVE('',#757,#1199); #1199 = DEFINITIONAL_REPRESENTATION('',(#1200),#1204); #1200 = LINE('',#1201,#1202);-#1201 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#1201 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #1202 = VECTOR('',#1203,1.);-#1203 = DIRECTION('',(0.,-1.));+#1203 = DIRECTION('',(1.,0.)); #1204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1205 = ORIENTED_EDGE('',*,*,#925,.T.);-#1206 = ADVANCED_FACE('',(#1207),#811,.F.);-#1207 = FACE_BOUND('',#1208,.F.);-#1208 = EDGE_LOOP('',(#1209,#1210,#1211,#1212,#1235,#1258,#1279,#1280));-#1209 = ORIENTED_EDGE('',*,*,#797,.T.);-#1210 = ORIENTED_EDGE('',*,*,#953,.T.);-#1211 = ORIENTED_EDGE('',*,*,#1185,.T.);-#1212 = ORIENTED_EDGE('',*,*,#1213,.T.);-#1213 = EDGE_CURVE('',#1163,#1214,#1216,.T.);-#1214 = VERTEX_POINT('',#1215);-#1215 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#1216 = SURFACE_CURVE('',#1217,(#1221,#1228),.PCURVE_S1.);-#1217 = LINE('',#1218,#1219);-#1218 = CARTESIAN_POINT('',(-3.205,3.075,0.15));-#1219 = VECTOR('',#1220,1.);-#1220 = DIRECTION('',(0.,0.,-1.));-#1221 = PCURVE('',#811,#1222);+#1205 = ORIENTED_EDGE('',*,*,#1159,.F.);+#1206 = ORIENTED_EDGE('',*,*,#878,.F.);+#1207 = ORIENTED_EDGE('',*,*,#1208,.T.);+#1208 = EDGE_CURVE('',#851,#1184,#1209,.T.);+#1209 = SURFACE_CURVE('',#1210,(#1214,#1221),.PCURVE_S1.);+#1210 = LINE('',#1211,#1212);+#1211 = CARTESIAN_POINT('',(-3.205,3.075,0.15));+#1212 = VECTOR('',#1213,1.);+#1213 = DIRECTION('',(0.,-1.,0.));+#1214 = PCURVE('',#894,#1215);+#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(0.,0.15));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.,-1.));+#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1221 = PCURVE('',#866,#1222); #1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227); #1223 = LINE('',#1224,#1225);-#1224 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1224 = CARTESIAN_POINT('',(0.5675,0.15)); #1225 = VECTOR('',#1226,1.);-#1226 = DIRECTION('',(1.,0.));+#1226 = DIRECTION('',(0.,-1.)); #1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1228 = PCURVE('',#1019,#1229);-#1229 = DEFINITIONAL_REPRESENTATION('',(#1230),#1234);-#1230 = LINE('',#1231,#1232);-#1231 = CARTESIAN_POINT('',(0.,0.15));-#1232 = VECTOR('',#1233,1.);-#1233 = DIRECTION('',(1.,0.));-#1234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1235 = ORIENTED_EDGE('',*,*,#1236,.T.);-#1236 = EDGE_CURVE('',#1214,#1237,#1239,.T.);-#1237 = VERTEX_POINT('',#1238);-#1238 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#1239 = SURFACE_CURVE('',#1240,(#1244,#1251),.PCURVE_S1.);-#1240 = LINE('',#1241,#1242);-#1241 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#1242 = VECTOR('',#1243,1.);-#1243 = DIRECTION('',(1.,0.,0.));-#1244 = PCURVE('',#811,#1245);-#1245 = DEFINITIONAL_REPRESENTATION('',(#1246),#1250);-#1246 = LINE('',#1247,#1248);-#1247 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#1248 = VECTOR('',#1249,1.);-#1249 = DIRECTION('',(0.,1.));-#1250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1251 = PCURVE('',#1047,#1252);-#1252 = DEFINITIONAL_REPRESENTATION('',(#1253),#1257);-#1253 = LINE('',#1254,#1255);-#1254 = CARTESIAN_POINT('',(0.,0.15));-#1255 = VECTOR('',#1256,1.);-#1256 = DIRECTION('',(1.,0.));-#1257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1258 = ORIENTED_EDGE('',*,*,#1259,.T.);-#1259 = EDGE_CURVE('',#1237,#1113,#1260,.T.);-#1260 = SURFACE_CURVE('',#1261,(#1265,#1272),.PCURVE_S1.);-#1261 = LINE('',#1262,#1263);-#1262 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#1263 = VECTOR('',#1264,1.);-#1264 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1265 = PCURVE('',#811,#1266);-#1266 = DEFINITIONAL_REPRESENTATION('',(#1267),#1271);-#1267 = LINE('',#1268,#1269);-#1268 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#1269 = VECTOR('',#1270,1.);-#1270 = DIRECTION('',(-0.839949759337,0.542664170358));-#1271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1272 = PCURVE('',#1075,#1273);-#1273 = DEFINITIONAL_REPRESENTATION('',(#1274),#1278);-#1274 = LINE('',#1275,#1276);-#1275 = CARTESIAN_POINT('',(0.,0.15));-#1276 = VECTOR('',#1277,1.);-#1277 = DIRECTION('',(1.,0.));-#1278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1279 = ORIENTED_EDGE('',*,*,#1137,.T.);-#1280 = ORIENTED_EDGE('',*,*,#878,.T.);-#1281 = ADVANCED_FACE('',(#1282),#1019,.F.);-#1282 = FACE_BOUND('',#1283,.F.);-#1283 = EDGE_LOOP('',(#1284,#1285,#1306,#1307));-#1284 = ORIENTED_EDGE('',*,*,#1003,.T.);-#1285 = ORIENTED_EDGE('',*,*,#1286,.F.);-#1286 = EDGE_CURVE('',#1214,#1004,#1287,.T.);-#1287 = SURFACE_CURVE('',#1288,(#1292,#1299),.PCURVE_S1.);-#1288 = LINE('',#1289,#1290);-#1289 = CARTESIAN_POINT('',(-3.205,3.075,0.));-#1290 = VECTOR('',#1291,1.);-#1291 = DIRECTION('',(0.,-1.,0.));-#1292 = PCURVE('',#1019,#1293);-#1293 = DEFINITIONAL_REPRESENTATION('',(#1294),#1298);-#1294 = LINE('',#1295,#1296);-#1295 = CARTESIAN_POINT('',(0.15,0.15));-#1296 = VECTOR('',#1297,1.);-#1297 = DIRECTION('',(0.,-1.));-#1298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1299 = PCURVE('',#1047,#1300);-#1300 = DEFINITIONAL_REPRESENTATION('',(#1301),#1305);-#1301 = LINE('',#1302,#1303);-#1302 = CARTESIAN_POINT('',(0.,0.15));-#1303 = VECTOR('',#1304,1.);-#1304 = DIRECTION('',(0.,-1.));-#1305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1306 = ORIENTED_EDGE('',*,*,#1213,.F.);-#1307 = ORIENTED_EDGE('',*,*,#1162,.T.);-#1308 = ADVANCED_FACE('',(#1309),#1047,.F.);-#1309 = FACE_BOUND('',#1310,.F.);-#1310 = EDGE_LOOP('',(#1311,#1312,#1333,#1334));-#1311 = ORIENTED_EDGE('',*,*,#1031,.T.);-#1312 = ORIENTED_EDGE('',*,*,#1313,.F.);-#1313 = EDGE_CURVE('',#1237,#1032,#1314,.T.);-#1314 = SURFACE_CURVE('',#1315,(#1319,#1326),.PCURVE_S1.);-#1315 = LINE('',#1316,#1317);-#1316 = CARTESIAN_POINT('',(-2.4875,3.075,0.));-#1317 = VECTOR('',#1318,1.);-#1318 = DIRECTION('',(0.,-1.,0.));-#1319 = PCURVE('',#1047,#1320);-#1320 = DEFINITIONAL_REPRESENTATION('',(#1321),#1325);-#1321 = LINE('',#1322,#1323);-#1322 = CARTESIAN_POINT('',(0.7175,0.15));-#1323 = VECTOR('',#1324,1.);-#1324 = DIRECTION('',(0.,-1.));-#1325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1326 = PCURVE('',#1075,#1327);-#1327 = DEFINITIONAL_REPRESENTATION('',(#1328),#1332);-#1328 = LINE('',#1329,#1330);-#1329 = CARTESIAN_POINT('',(0.,0.15));-#1330 = VECTOR('',#1331,1.);-#1331 = DIRECTION('',(0.,-1.));-#1332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1333 = ORIENTED_EDGE('',*,*,#1236,.F.);-#1334 = ORIENTED_EDGE('',*,*,#1286,.T.);-#1335 = ADVANCED_FACE('',(#1336),#1075,.F.);+#1228 = ADVANCED_FACE('',(#1229),#866,.F.);+#1229 = FACE_BOUND('',#1230,.F.);+#1230 = EDGE_LOOP('',(#1231,#1254,#1255,#1256));+#1231 = ORIENTED_EDGE('',*,*,#1232,.T.);+#1232 = EDGE_CURVE('',#1233,#1184,#1235,.T.);+#1233 = VERTEX_POINT('',#1234);+#1234 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#1235 = SURFACE_CURVE('',#1236,(#1240,#1247),.PCURVE_S1.);+#1236 = LINE('',#1237,#1238);+#1237 = CARTESIAN_POINT('',(-2.6375,2.775,0.15));+#1238 = VECTOR('',#1239,1.);+#1239 = DIRECTION('',(-1.,0.,0.));+#1240 = PCURVE('',#866,#1241);+#1241 = DEFINITIONAL_REPRESENTATION('',(#1242),#1246);+#1242 = LINE('',#1243,#1244);+#1243 = CARTESIAN_POINT('',(0.,-0.15));+#1244 = VECTOR('',#1245,1.);+#1245 = DIRECTION('',(1.,0.));+#1246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1247 = PCURVE('',#757,#1248);+#1248 = DEFINITIONAL_REPRESENTATION('',(#1249),#1253);+#1249 = LINE('',#1250,#1251);+#1250 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#1251 = VECTOR('',#1252,1.);+#1252 = DIRECTION('',(0.,-1.));+#1253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1254 = ORIENTED_EDGE('',*,*,#1208,.F.);+#1255 = ORIENTED_EDGE('',*,*,#850,.F.);+#1256 = ORIENTED_EDGE('',*,*,#1257,.T.);+#1257 = EDGE_CURVE('',#828,#1233,#1258,.T.);+#1258 = SURFACE_CURVE('',#1259,(#1263,#1270),.PCURVE_S1.);+#1259 = LINE('',#1260,#1261);+#1260 = CARTESIAN_POINT('',(-2.6375,3.075,0.15));+#1261 = VECTOR('',#1262,1.);+#1262 = DIRECTION('',(0.,-1.,0.));+#1263 = PCURVE('',#866,#1264);+#1264 = DEFINITIONAL_REPRESENTATION('',(#1265),#1269);+#1265 = LINE('',#1266,#1267);+#1266 = CARTESIAN_POINT('',(0.,0.15));+#1267 = VECTOR('',#1268,1.);+#1268 = DIRECTION('',(0.,-1.));+#1269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1270 = PCURVE('',#785,#1271);+#1271 = DEFINITIONAL_REPRESENTATION('',(#1272),#1276);+#1272 = LINE('',#1273,#1274);+#1273 = CARTESIAN_POINT('',(0.529793591883,0.15));+#1274 = VECTOR('',#1275,1.);+#1275 = DIRECTION('',(-0.,-1.));+#1276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1277 = ADVANCED_FACE('',(#1278),#785,.F.);+#1278 = FACE_BOUND('',#1279,.F.);+#1279 = EDGE_LOOP('',(#1280,#1301,#1302,#1303));+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#742,#1233,#1282,.T.);+#1282 = SURFACE_CURVE('',#1283,(#1287,#1294),.PCURVE_S1.);+#1283 = LINE('',#1284,#1285);+#1284 = CARTESIAN_POINT('',(-2.35,2.775,0.595));+#1285 = VECTOR('',#1286,1.);+#1286 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1287 = PCURVE('',#785,#1288);+#1288 = DEFINITIONAL_REPRESENTATION('',(#1289),#1293);+#1289 = LINE('',#1290,#1291);+#1290 = CARTESIAN_POINT('',(-0.,-0.15));+#1291 = VECTOR('',#1292,1.);+#1292 = DIRECTION('',(1.,0.));+#1293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1294 = PCURVE('',#757,#1295);+#1295 = DEFINITIONAL_REPRESENTATION('',(#1296),#1300);+#1296 = LINE('',#1297,#1298);+#1297 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1298 = VECTOR('',#1299,1.);+#1299 = DIRECTION('',(0.839949759337,-0.542664170358));+#1300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1301 = ORIENTED_EDGE('',*,*,#1257,.F.);+#1302 = ORIENTED_EDGE('',*,*,#827,.F.);+#1303 = ORIENTED_EDGE('',*,*,#769,.T.);+#1304 = ADVANCED_FACE('',(#1305),#757,.T.);+#1305 = FACE_BOUND('',#1306,.T.);+#1306 = EDGE_LOOP('',(#1307,#1308,#1309,#1310,#1311,#1312,#1313,#1314));+#1307 = ORIENTED_EDGE('',*,*,#741,.T.);+#1308 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1309 = ORIENTED_EDGE('',*,*,#1232,.T.);+#1310 = ORIENTED_EDGE('',*,*,#1183,.T.);+#1311 = ORIENTED_EDGE('',*,*,#1134,.T.);+#1312 = ORIENTED_EDGE('',*,*,#1085,.T.);+#1313 = ORIENTED_EDGE('',*,*,#1037,.T.);+#1314 = ORIENTED_EDGE('',*,*,#1315,.T.);+#1315 = EDGE_CURVE('',#1038,#707,#1316,.T.);+#1316 = SURFACE_CURVE('',#1317,(#1321,#1328),.PCURVE_S1.);+#1317 = LINE('',#1318,#1319);+#1318 = CARTESIAN_POINT('',(-2.15,2.775,0.445));+#1319 = VECTOR('',#1320,1.);+#1320 = DIRECTION('',(0.,0.,1.));+#1321 = PCURVE('',#757,#1322);+#1322 = DEFINITIONAL_REPRESENTATION('',(#1323),#1327);+#1323 = LINE('',#1324,#1325);+#1324 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1325 = VECTOR('',#1326,1.);+#1326 = DIRECTION('',(-1.,0.));+#1327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1328 = PCURVE('',#729,#1329);+#1329 = DEFINITIONAL_REPRESENTATION('',(#1330),#1334);+#1330 = LINE('',#1331,#1332);+#1331 = CARTESIAN_POINT('',(0.,-0.15));+#1332 = VECTOR('',#1333,1.);+#1333 = DIRECTION('',(1.,0.));+#1334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1335 = ADVANCED_FACE('',(#1336),#729,.F.); #1336 = FACE_BOUND('',#1337,.F.); #1337 = EDGE_LOOP('',(#1338,#1339,#1340,#1341));-#1338 = ORIENTED_EDGE('',*,*,#1059,.T.);-#1339 = ORIENTED_EDGE('',*,*,#1112,.T.);-#1340 = ORIENTED_EDGE('',*,*,#1259,.F.);-#1341 = ORIENTED_EDGE('',*,*,#1313,.T.);+#1338 = ORIENTED_EDGE('',*,*,#1060,.F.);+#1339 = ORIENTED_EDGE('',*,*,#1315,.T.);+#1340 = ORIENTED_EDGE('',*,*,#706,.T.);+#1341 = ORIENTED_EDGE('',*,*,#990,.F.); #1342 = MANIFOLD_SOLID_BREP('',#1343);-#1343 = CLOSED_SHELL('',(#1344,#1464,#1540,#1616,#1750,#1799,#1848,#1923- ,#1950,#1977));+#1343 = CLOSED_SHELL('',(#1344,#1464,#1652,#1723,#1772,#1821,#1870,#1919+ ,#1946,#1977)); #1344 = ADVANCED_FACE('',(#1345),#1359,.F.); #1345 = FACE_BOUND('',#1346,.F.); #1346 = EDGE_LOOP('',(#1347,#1382,#1410,#1438));@@ -1700,609 +1700,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1464 = ADVANCED_FACE('',(#1465),#1371,.F.);+#1464 = ADVANCED_FACE('',(#1465),#1453,.F.); #1465 = FACE_BOUND('',#1466,.F.);-#1466 = EDGE_LOOP('',(#1467,#1497,#1518,#1519));-#1467 = ORIENTED_EDGE('',*,*,#1468,.F.);-#1468 = EDGE_CURVE('',#1469,#1471,#1473,.T.);-#1469 = VERTEX_POINT('',#1470);-#1470 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#1471 = VERTEX_POINT('',#1472);-#1472 = CARTESIAN_POINT('',(-2.15,2.425,0.445));-#1473 = SURFACE_CURVE('',#1474,(#1478,#1485),.PCURVE_S1.);-#1474 = LINE('',#1475,#1476);-#1475 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#1476 = VECTOR('',#1477,1.);-#1477 = DIRECTION('',(0.,1.,0.));-#1478 = PCURVE('',#1371,#1479);-#1479 = DEFINITIONAL_REPRESENTATION('',(#1480),#1484);-#1480 = LINE('',#1481,#1482);-#1481 = CARTESIAN_POINT('',(0.,-0.15));-#1482 = VECTOR('',#1483,1.);-#1483 = DIRECTION('',(0.,1.));-#1484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1485 = PCURVE('',#1486,#1491);-#1486 = PLANE('',#1487);-#1487 = AXIS2_PLACEMENT_3D('',#1488,#1489,#1490);-#1488 = CARTESIAN_POINT('',(-2.2,2.275,0.445));-#1489 = DIRECTION('',(-0.,0.,1.));-#1490 = DIRECTION('',(1.,0.,0.));-#1491 = DEFINITIONAL_REPRESENTATION('',(#1492),#1496);-#1492 = LINE('',#1493,#1494);-#1493 = CARTESIAN_POINT('',(5.E-02,-0.15));-#1494 = VECTOR('',#1495,1.);-#1495 = DIRECTION('',(0.,1.));-#1496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1497 = ORIENTED_EDGE('',*,*,#1498,.T.);-#1498 = EDGE_CURVE('',#1469,#1349,#1499,.T.);-#1499 = SURFACE_CURVE('',#1500,(#1504,#1511),.PCURVE_S1.);-#1500 = LINE('',#1501,#1502);-#1501 = CARTESIAN_POINT('',(-2.15,2.125,0.445));-#1502 = VECTOR('',#1503,1.);-#1503 = DIRECTION('',(0.,0.,1.));-#1504 = PCURVE('',#1371,#1505);-#1505 = DEFINITIONAL_REPRESENTATION('',(#1506),#1510);-#1506 = LINE('',#1507,#1508);-#1507 = CARTESIAN_POINT('',(0.,-0.15));-#1508 = VECTOR('',#1509,1.);-#1509 = DIRECTION('',(1.,0.));-#1510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1511 = PCURVE('',#1399,#1512);-#1512 = DEFINITIONAL_REPRESENTATION('',(#1513),#1517);-#1513 = LINE('',#1514,#1515);-#1514 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#1515 = VECTOR('',#1516,1.);-#1516 = DIRECTION('',(-1.,0.));-#1517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1518 = ORIENTED_EDGE('',*,*,#1348,.T.);-#1519 = ORIENTED_EDGE('',*,*,#1520,.F.);-#1520 = EDGE_CURVE('',#1471,#1351,#1521,.T.);-#1521 = SURFACE_CURVE('',#1522,(#1526,#1533),.PCURVE_S1.);-#1522 = LINE('',#1523,#1524);-#1523 = CARTESIAN_POINT('',(-2.15,2.425,0.445));-#1524 = VECTOR('',#1525,1.);-#1525 = DIRECTION('',(0.,0.,1.));-#1526 = PCURVE('',#1371,#1527);-#1527 = DEFINITIONAL_REPRESENTATION('',(#1528),#1532);-#1528 = LINE('',#1529,#1530);-#1529 = CARTESIAN_POINT('',(0.,0.15));-#1530 = VECTOR('',#1531,1.);-#1531 = DIRECTION('',(1.,0.));-#1532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1533 = PCURVE('',#1453,#1534);-#1534 = DEFINITIONAL_REPRESENTATION('',(#1535),#1539);-#1535 = LINE('',#1536,#1537);-#1536 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#1537 = VECTOR('',#1538,1.);-#1538 = DIRECTION('',(-1.,0.));-#1539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1540 = ADVANCED_FACE('',(#1541),#1427,.F.);-#1541 = FACE_BOUND('',#1542,.F.);-#1542 = EDGE_LOOP('',(#1543,#1566,#1594,#1615));-#1543 = ORIENTED_EDGE('',*,*,#1544,.T.);-#1544 = EDGE_CURVE('',#1384,#1545,#1547,.T.);-#1545 = VERTEX_POINT('',#1546);-#1546 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));-#1547 = SURFACE_CURVE('',#1548,(#1552,#1559),.PCURVE_S1.);-#1548 = LINE('',#1549,#1550);-#1549 = CARTESIAN_POINT('',(-2.35,2.125,0.595));-#1550 = VECTOR('',#1551,1.);-#1551 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1552 = PCURVE('',#1427,#1553);-#1553 = DEFINITIONAL_REPRESENTATION('',(#1554),#1558);-#1554 = LINE('',#1555,#1556);-#1555 = CARTESIAN_POINT('',(-0.,-0.15));-#1556 = VECTOR('',#1557,1.);-#1557 = DIRECTION('',(1.,0.));-#1558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1559 = PCURVE('',#1399,#1560);-#1560 = DEFINITIONAL_REPRESENTATION('',(#1561),#1565);-#1561 = LINE('',#1562,#1563);-#1562 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#1563 = VECTOR('',#1564,1.);-#1564 = DIRECTION('',(0.839949759337,-0.542664170358));-#1565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1566 = ORIENTED_EDGE('',*,*,#1567,.F.);-#1567 = EDGE_CURVE('',#1568,#1545,#1570,.T.);-#1568 = VERTEX_POINT('',#1569);-#1569 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));-#1570 = SURFACE_CURVE('',#1571,(#1575,#1582),.PCURVE_S1.);-#1571 = LINE('',#1572,#1573);-#1572 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));-#1573 = VECTOR('',#1574,1.);-#1574 = DIRECTION('',(0.,-1.,0.));-#1575 = PCURVE('',#1427,#1576);-#1576 = DEFINITIONAL_REPRESENTATION('',(#1577),#1581);-#1577 = LINE('',#1578,#1579);-#1578 = CARTESIAN_POINT('',(0.529793591883,0.15));-#1579 = VECTOR('',#1580,1.);-#1580 = DIRECTION('',(-0.,-1.));-#1581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1582 = PCURVE('',#1583,#1588);-#1583 = PLANE('',#1584);-#1584 = AXIS2_PLACEMENT_3D('',#1585,#1586,#1587);-#1585 = CARTESIAN_POINT('',(-2.6375,2.275,0.15));-#1586 = DIRECTION('',(-0.,-0.,-1.));-#1587 = DIRECTION('',(-1.,0.,0.));-#1588 = DEFINITIONAL_REPRESENTATION('',(#1589),#1593);-#1589 = LINE('',#1590,#1591);-#1590 = CARTESIAN_POINT('',(0.,0.15));-#1591 = VECTOR('',#1592,1.);-#1592 = DIRECTION('',(0.,-1.));-#1593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1594 = ORIENTED_EDGE('',*,*,#1595,.F.);-#1595 = EDGE_CURVE('',#1412,#1568,#1596,.T.);-#1596 = SURFACE_CURVE('',#1597,(#1601,#1608),.PCURVE_S1.);-#1597 = LINE('',#1598,#1599);-#1598 = CARTESIAN_POINT('',(-2.35,2.425,0.595));-#1599 = VECTOR('',#1600,1.);-#1600 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#1601 = PCURVE('',#1427,#1602);-#1602 = DEFINITIONAL_REPRESENTATION('',(#1603),#1607);-#1603 = LINE('',#1604,#1605);-#1604 = CARTESIAN_POINT('',(0.,0.15));-#1605 = VECTOR('',#1606,1.);-#1606 = DIRECTION('',(1.,0.));-#1607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1608 = PCURVE('',#1453,#1609);-#1609 = DEFINITIONAL_REPRESENTATION('',(#1610),#1614);-#1610 = LINE('',#1611,#1612);-#1611 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#1612 = VECTOR('',#1613,1.);-#1613 = DIRECTION('',(0.839949759337,-0.542664170358));-#1614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1615 = ORIENTED_EDGE('',*,*,#1411,.T.);-#1616 = ADVANCED_FACE('',(#1617),#1399,.T.);-#1617 = FACE_BOUND('',#1618,.T.);-#1618 = EDGE_LOOP('',(#1619,#1620,#1621,#1644,#1672,#1700,#1728,#1749));-#1619 = ORIENTED_EDGE('',*,*,#1383,.T.);-#1620 = ORIENTED_EDGE('',*,*,#1544,.T.);-#1621 = ORIENTED_EDGE('',*,*,#1622,.T.);-#1622 = EDGE_CURVE('',#1545,#1623,#1625,.T.);-#1623 = VERTEX_POINT('',#1624);-#1624 = CARTESIAN_POINT('',(-3.205,2.125,0.15));-#1625 = SURFACE_CURVE('',#1626,(#1630,#1637),.PCURVE_S1.);+#1466 = EDGE_LOOP('',(#1467,#1468,#1491,#1519,#1547,#1575,#1603,#1631));+#1467 = ORIENTED_EDGE('',*,*,#1439,.T.);+#1468 = ORIENTED_EDGE('',*,*,#1469,.T.);+#1469 = EDGE_CURVE('',#1412,#1470,#1472,.T.);+#1470 = VERTEX_POINT('',#1471);+#1471 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1472 = SURFACE_CURVE('',#1473,(#1477,#1484),.PCURVE_S1.);+#1473 = LINE('',#1474,#1475);+#1474 = CARTESIAN_POINT('',(-2.35,2.425,0.595));+#1475 = VECTOR('',#1476,1.);+#1476 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1477 = PCURVE('',#1453,#1478);+#1478 = DEFINITIONAL_REPRESENTATION('',(#1479),#1483);+#1479 = LINE('',#1480,#1481);+#1480 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1481 = VECTOR('',#1482,1.);+#1482 = DIRECTION('',(0.839949759337,-0.542664170358));+#1483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1484 = PCURVE('',#1427,#1485);+#1485 = DEFINITIONAL_REPRESENTATION('',(#1486),#1490);+#1486 = LINE('',#1487,#1488);+#1487 = CARTESIAN_POINT('',(0.,0.15));+#1488 = VECTOR('',#1489,1.);+#1489 = DIRECTION('',(1.,0.));+#1490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1491 = ORIENTED_EDGE('',*,*,#1492,.T.);+#1492 = EDGE_CURVE('',#1470,#1493,#1495,.T.);+#1493 = VERTEX_POINT('',#1494);+#1494 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1495 = SURFACE_CURVE('',#1496,(#1500,#1507),.PCURVE_S1.);+#1496 = LINE('',#1497,#1498);+#1497 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1498 = VECTOR('',#1499,1.);+#1499 = DIRECTION('',(-1.,0.,0.));+#1500 = PCURVE('',#1453,#1501);+#1501 = DEFINITIONAL_REPRESENTATION('',(#1502),#1506);+#1502 = LINE('',#1503,#1504);+#1503 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#1504 = VECTOR('',#1505,1.);+#1505 = DIRECTION('',(0.,-1.));+#1506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1507 = PCURVE('',#1508,#1513);+#1508 = PLANE('',#1509);+#1509 = AXIS2_PLACEMENT_3D('',#1510,#1511,#1512);+#1510 = CARTESIAN_POINT('',(-2.6375,2.275,0.15));+#1511 = DIRECTION('',(-0.,-0.,-1.));+#1512 = DIRECTION('',(-1.,0.,0.));+#1513 = DEFINITIONAL_REPRESENTATION('',(#1514),#1518);+#1514 = LINE('',#1515,#1516);+#1515 = CARTESIAN_POINT('',(0.,0.15));+#1516 = VECTOR('',#1517,1.);+#1517 = DIRECTION('',(1.,0.));+#1518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1519 = ORIENTED_EDGE('',*,*,#1520,.T.);+#1520 = EDGE_CURVE('',#1493,#1521,#1523,.T.);+#1521 = VERTEX_POINT('',#1522);+#1522 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1523 = SURFACE_CURVE('',#1524,(#1528,#1535),.PCURVE_S1.);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(0.,0.,-1.));+#1528 = PCURVE('',#1453,#1529);+#1529 = DEFINITIONAL_REPRESENTATION('',(#1530),#1534);+#1530 = LINE('',#1531,#1532);+#1531 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1532 = VECTOR('',#1533,1.);+#1533 = DIRECTION('',(1.,0.));+#1534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1535 = PCURVE('',#1536,#1541);+#1536 = PLANE('',#1537);+#1537 = AXIS2_PLACEMENT_3D('',#1538,#1539,#1540);+#1538 = CARTESIAN_POINT('',(-3.205,2.275,0.15));+#1539 = DIRECTION('',(1.,0.,0.));+#1540 = DIRECTION('',(0.,0.,-1.));+#1541 = DEFINITIONAL_REPRESENTATION('',(#1542),#1546);+#1542 = LINE('',#1543,#1544);+#1543 = CARTESIAN_POINT('',(0.,0.15));+#1544 = VECTOR('',#1545,1.);+#1545 = DIRECTION('',(1.,0.));+#1546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1547 = ORIENTED_EDGE('',*,*,#1548,.T.);+#1548 = EDGE_CURVE('',#1521,#1549,#1551,.T.);+#1549 = VERTEX_POINT('',#1550);+#1550 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1551 = SURFACE_CURVE('',#1552,(#1556,#1563),.PCURVE_S1.);+#1552 = LINE('',#1553,#1554);+#1553 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1554 = VECTOR('',#1555,1.);+#1555 = DIRECTION('',(1.,0.,0.));+#1556 = PCURVE('',#1453,#1557);+#1557 = DEFINITIONAL_REPRESENTATION('',(#1558),#1562);+#1558 = LINE('',#1559,#1560);+#1559 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1560 = VECTOR('',#1561,1.);+#1561 = DIRECTION('',(0.,1.));+#1562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1563 = PCURVE('',#1564,#1569);+#1564 = PLANE('',#1565);+#1565 = AXIS2_PLACEMENT_3D('',#1566,#1567,#1568);+#1566 = CARTESIAN_POINT('',(-3.205,2.275,0.));+#1567 = DIRECTION('',(-0.,0.,1.));+#1568 = DIRECTION('',(1.,0.,0.));+#1569 = DEFINITIONAL_REPRESENTATION('',(#1570),#1574);+#1570 = LINE('',#1571,#1572);+#1571 = CARTESIAN_POINT('',(0.,0.15));+#1572 = VECTOR('',#1573,1.);+#1573 = DIRECTION('',(1.,0.));+#1574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1575 = ORIENTED_EDGE('',*,*,#1576,.T.);+#1576 = EDGE_CURVE('',#1549,#1577,#1579,.T.);+#1577 = VERTEX_POINT('',#1578);+#1578 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#1579 = SURFACE_CURVE('',#1580,(#1584,#1591),.PCURVE_S1.);+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1584 = PCURVE('',#1453,#1585);+#1585 = DEFINITIONAL_REPRESENTATION('',(#1586),#1590);+#1586 = LINE('',#1587,#1588);+#1587 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#1588 = VECTOR('',#1589,1.);+#1589 = DIRECTION('',(-0.839949759337,0.542664170358));+#1590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1591 = PCURVE('',#1592,#1597);+#1592 = PLANE('',#1593);+#1593 = AXIS2_PLACEMENT_3D('',#1594,#1595,#1596);+#1594 = CARTESIAN_POINT('',(-2.4875,2.275,0.));+#1595 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#1596 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1597 = DEFINITIONAL_REPRESENTATION('',(#1598),#1602);+#1598 = LINE('',#1599,#1600);+#1599 = CARTESIAN_POINT('',(0.,0.15));+#1600 = VECTOR('',#1601,1.);+#1601 = DIRECTION('',(1.,0.));+#1602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1603 = ORIENTED_EDGE('',*,*,#1604,.T.);+#1604 = EDGE_CURVE('',#1577,#1605,#1607,.T.);+#1605 = VERTEX_POINT('',#1606);+#1606 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#1607 = SURFACE_CURVE('',#1608,(#1612,#1619),.PCURVE_S1.);+#1608 = LINE('',#1609,#1610);+#1609 = CARTESIAN_POINT('',(-2.2,2.425,0.445));+#1610 = VECTOR('',#1611,1.);+#1611 = DIRECTION('',(1.,0.,0.));+#1612 = PCURVE('',#1453,#1613);+#1613 = DEFINITIONAL_REPRESENTATION('',(#1614),#1618);+#1614 = LINE('',#1615,#1616);+#1615 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1616 = VECTOR('',#1617,1.);+#1617 = DIRECTION('',(0.,1.));+#1618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1619 = PCURVE('',#1620,#1625);+#1620 = PLANE('',#1621);+#1621 = AXIS2_PLACEMENT_3D('',#1622,#1623,#1624);+#1622 = CARTESIAN_POINT('',(-2.2,2.275,0.445));+#1623 = DIRECTION('',(-0.,0.,1.));+#1624 = DIRECTION('',(1.,0.,0.));+#1625 = DEFINITIONAL_REPRESENTATION('',(#1626),#1630); #1626 = LINE('',#1627,#1628);-#1627 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#1627 = CARTESIAN_POINT('',(0.,0.15)); #1628 = VECTOR('',#1629,1.);-#1629 = DIRECTION('',(-1.,0.,0.));-#1630 = PCURVE('',#1399,#1631);-#1631 = DEFINITIONAL_REPRESENTATION('',(#1632),#1636);-#1632 = LINE('',#1633,#1634);-#1633 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#1634 = VECTOR('',#1635,1.);-#1635 = DIRECTION('',(0.,-1.));-#1636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1637 = PCURVE('',#1583,#1638);-#1638 = DEFINITIONAL_REPRESENTATION('',(#1639),#1643);-#1639 = LINE('',#1640,#1641);-#1640 = CARTESIAN_POINT('',(0.,-0.15));-#1641 = VECTOR('',#1642,1.);-#1642 = DIRECTION('',(1.,0.));-#1643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1644 = ORIENTED_EDGE('',*,*,#1645,.T.);-#1645 = EDGE_CURVE('',#1623,#1646,#1648,.T.);-#1646 = VERTEX_POINT('',#1647);-#1647 = CARTESIAN_POINT('',(-3.205,2.125,0.));-#1648 = SURFACE_CURVE('',#1649,(#1653,#1660),.PCURVE_S1.);-#1649 = LINE('',#1650,#1651);-#1650 = CARTESIAN_POINT('',(-3.205,2.125,0.15));-#1651 = VECTOR('',#1652,1.);-#1652 = DIRECTION('',(0.,0.,-1.));-#1653 = PCURVE('',#1399,#1654);-#1654 = DEFINITIONAL_REPRESENTATION('',(#1655),#1659);-#1655 = LINE('',#1656,#1657);-#1656 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#1657 = VECTOR('',#1658,1.);-#1658 = DIRECTION('',(1.,0.));-#1659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1660 = PCURVE('',#1661,#1666);-#1661 = PLANE('',#1662);-#1662 = AXIS2_PLACEMENT_3D('',#1663,#1664,#1665);-#1663 = CARTESIAN_POINT('',(-3.205,2.275,0.15));-#1664 = DIRECTION('',(1.,0.,0.));-#1665 = DIRECTION('',(0.,0.,-1.));-#1666 = DEFINITIONAL_REPRESENTATION('',(#1667),#1671);-#1667 = LINE('',#1668,#1669);-#1668 = CARTESIAN_POINT('',(0.,-0.15));-#1669 = VECTOR('',#1670,1.);-#1670 = DIRECTION('',(1.,0.));-#1671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1672 = ORIENTED_EDGE('',*,*,#1673,.T.);-#1673 = EDGE_CURVE('',#1646,#1674,#1676,.T.);-#1674 = VERTEX_POINT('',#1675);-#1675 = CARTESIAN_POINT('',(-2.4875,2.125,0.));-#1676 = SURFACE_CURVE('',#1677,(#1681,#1688),.PCURVE_S1.);-#1677 = LINE('',#1678,#1679);-#1678 = CARTESIAN_POINT('',(-3.205,2.125,0.));-#1679 = VECTOR('',#1680,1.);-#1680 = DIRECTION('',(1.,0.,0.));-#1681 = PCURVE('',#1399,#1682);-#1682 = DEFINITIONAL_REPRESENTATION('',(#1683),#1687);+#1629 = DIRECTION('',(1.,0.));+#1630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1631 = ORIENTED_EDGE('',*,*,#1632,.T.);+#1632 = EDGE_CURVE('',#1605,#1351,#1633,.T.);+#1633 = SURFACE_CURVE('',#1634,(#1638,#1645),.PCURVE_S1.);+#1634 = LINE('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(-2.15,2.425,0.445));+#1636 = VECTOR('',#1637,1.);+#1637 = DIRECTION('',(0.,0.,1.));+#1638 = PCURVE('',#1453,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(-1.,0.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = PCURVE('',#1371,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(0.,0.15));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(1.,0.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = ADVANCED_FACE('',(#1653),#1620,.F.);+#1653 = FACE_BOUND('',#1654,.F.);+#1654 = EDGE_LOOP('',(#1655,#1678,#1701,#1722));+#1655 = ORIENTED_EDGE('',*,*,#1656,.F.);+#1656 = EDGE_CURVE('',#1657,#1577,#1659,.T.);+#1657 = VERTEX_POINT('',#1658);+#1658 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1659 = SURFACE_CURVE('',#1660,(#1664,#1671),.PCURVE_S1.);+#1660 = LINE('',#1661,#1662);+#1661 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1662 = VECTOR('',#1663,1.);+#1663 = DIRECTION('',(0.,1.,0.));+#1664 = PCURVE('',#1620,#1665);+#1665 = DEFINITIONAL_REPRESENTATION('',(#1666),#1670);+#1666 = LINE('',#1667,#1668);+#1667 = CARTESIAN_POINT('',(0.,-0.15));+#1668 = VECTOR('',#1669,1.);+#1669 = DIRECTION('',(0.,1.));+#1670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1671 = PCURVE('',#1592,#1672);+#1672 = DEFINITIONAL_REPRESENTATION('',(#1673),#1677);+#1673 = LINE('',#1674,#1675);+#1674 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#1675 = VECTOR('',#1676,1.);+#1676 = DIRECTION('',(0.,1.));+#1677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1678 = ORIENTED_EDGE('',*,*,#1679,.T.);+#1679 = EDGE_CURVE('',#1657,#1680,#1682,.T.);+#1680 = VERTEX_POINT('',#1681);+#1681 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1682 = SURFACE_CURVE('',#1683,(#1687,#1694),.PCURVE_S1.); #1683 = LINE('',#1684,#1685);-#1684 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1684 = CARTESIAN_POINT('',(-2.2,2.125,0.445)); #1685 = VECTOR('',#1686,1.);-#1686 = DIRECTION('',(0.,1.));-#1687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1688 = PCURVE('',#1689,#1694);-#1689 = PLANE('',#1690);-#1690 = AXIS2_PLACEMENT_3D('',#1691,#1692,#1693);-#1691 = CARTESIAN_POINT('',(-3.205,2.275,0.));-#1692 = DIRECTION('',(-0.,0.,1.));-#1693 = DIRECTION('',(1.,0.,0.));-#1694 = DEFINITIONAL_REPRESENTATION('',(#1695),#1699);-#1695 = LINE('',#1696,#1697);-#1696 = CARTESIAN_POINT('',(0.,-0.15));-#1697 = VECTOR('',#1698,1.);-#1698 = DIRECTION('',(1.,0.));-#1699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1700 = ORIENTED_EDGE('',*,*,#1701,.T.);-#1701 = EDGE_CURVE('',#1674,#1702,#1704,.T.);-#1702 = VERTEX_POINT('',#1703);-#1703 = CARTESIAN_POINT('',(-2.2,2.125,0.445));-#1704 = SURFACE_CURVE('',#1705,(#1709,#1716),.PCURVE_S1.);-#1705 = LINE('',#1706,#1707);-#1706 = CARTESIAN_POINT('',(-2.4875,2.125,0.));-#1707 = VECTOR('',#1708,1.);-#1708 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1709 = PCURVE('',#1399,#1710);-#1710 = DEFINITIONAL_REPRESENTATION('',(#1711),#1715);-#1711 = LINE('',#1712,#1713);-#1712 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#1713 = VECTOR('',#1714,1.);-#1714 = DIRECTION('',(-0.839949759337,0.542664170358));-#1715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1716 = PCURVE('',#1717,#1722);-#1717 = PLANE('',#1718);-#1718 = AXIS2_PLACEMENT_3D('',#1719,#1720,#1721);-#1719 = CARTESIAN_POINT('',(-2.4875,2.275,0.));-#1720 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#1721 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1722 = DEFINITIONAL_REPRESENTATION('',(#1723),#1727);-#1723 = LINE('',#1724,#1725);-#1724 = CARTESIAN_POINT('',(0.,-0.15));-#1725 = VECTOR('',#1726,1.);-#1726 = DIRECTION('',(1.,0.));-#1727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1728 = ORIENTED_EDGE('',*,*,#1729,.T.);-#1729 = EDGE_CURVE('',#1702,#1469,#1730,.T.);+#1686 = DIRECTION('',(1.,0.,0.));+#1687 = PCURVE('',#1620,#1688);+#1688 = DEFINITIONAL_REPRESENTATION('',(#1689),#1693);+#1689 = LINE('',#1690,#1691);+#1690 = CARTESIAN_POINT('',(0.,-0.15));+#1691 = VECTOR('',#1692,1.);+#1692 = DIRECTION('',(1.,0.));+#1693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1694 = PCURVE('',#1399,#1695);+#1695 = DEFINITIONAL_REPRESENTATION('',(#1696),#1700);+#1696 = LINE('',#1697,#1698);+#1697 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1698 = VECTOR('',#1699,1.);+#1699 = DIRECTION('',(0.,1.));+#1700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1701 = ORIENTED_EDGE('',*,*,#1702,.T.);+#1702 = EDGE_CURVE('',#1680,#1605,#1703,.T.);+#1703 = SURFACE_CURVE('',#1704,(#1708,#1715),.PCURVE_S1.);+#1704 = LINE('',#1705,#1706);+#1705 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1706 = VECTOR('',#1707,1.);+#1707 = DIRECTION('',(0.,1.,0.));+#1708 = PCURVE('',#1620,#1709);+#1709 = DEFINITIONAL_REPRESENTATION('',(#1710),#1714);+#1710 = LINE('',#1711,#1712);+#1711 = CARTESIAN_POINT('',(5.E-02,-0.15));+#1712 = VECTOR('',#1713,1.);+#1713 = DIRECTION('',(0.,1.));+#1714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1715 = PCURVE('',#1371,#1716);+#1716 = DEFINITIONAL_REPRESENTATION('',(#1717),#1721);+#1717 = LINE('',#1718,#1719);+#1718 = CARTESIAN_POINT('',(0.,-0.15));+#1719 = VECTOR('',#1720,1.);+#1720 = DIRECTION('',(0.,1.));+#1721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1722 = ORIENTED_EDGE('',*,*,#1604,.F.);+#1723 = ADVANCED_FACE('',(#1724),#1592,.F.);+#1724 = FACE_BOUND('',#1725,.F.);+#1725 = EDGE_LOOP('',(#1726,#1749,#1750,#1751));+#1726 = ORIENTED_EDGE('',*,*,#1727,.T.);+#1727 = EDGE_CURVE('',#1728,#1657,#1730,.T.);+#1728 = VERTEX_POINT('',#1729);+#1729 = CARTESIAN_POINT('',(-2.4875,2.125,0.)); #1730 = SURFACE_CURVE('',#1731,(#1735,#1742),.PCURVE_S1.); #1731 = LINE('',#1732,#1733);-#1732 = CARTESIAN_POINT('',(-2.2,2.125,0.445));+#1732 = CARTESIAN_POINT('',(-2.4875,2.125,0.)); #1733 = VECTOR('',#1734,1.);-#1734 = DIRECTION('',(1.,0.,0.));-#1735 = PCURVE('',#1399,#1736);+#1734 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#1735 = PCURVE('',#1592,#1736); #1736 = DEFINITIONAL_REPRESENTATION('',(#1737),#1741); #1737 = LINE('',#1738,#1739);-#1738 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#1738 = CARTESIAN_POINT('',(0.,-0.15)); #1739 = VECTOR('',#1740,1.);-#1740 = DIRECTION('',(0.,1.));+#1740 = DIRECTION('',(1.,0.)); #1741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1742 = PCURVE('',#1486,#1743);+#1742 = PCURVE('',#1399,#1743); #1743 = DEFINITIONAL_REPRESENTATION('',(#1744),#1748); #1744 = LINE('',#1745,#1746);-#1745 = CARTESIAN_POINT('',(0.,-0.15));+#1745 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #1746 = VECTOR('',#1747,1.);-#1747 = DIRECTION('',(1.,0.));+#1747 = DIRECTION('',(-0.839949759337,0.542664170358)); #1748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1749 = ORIENTED_EDGE('',*,*,#1498,.T.);-#1750 = ADVANCED_FACE('',(#1751),#1486,.F.);-#1751 = FACE_BOUND('',#1752,.F.);-#1752 = EDGE_LOOP('',(#1753,#1776,#1777,#1778));-#1753 = ORIENTED_EDGE('',*,*,#1754,.F.);-#1754 = EDGE_CURVE('',#1702,#1755,#1757,.T.);-#1755 = VERTEX_POINT('',#1756);-#1756 = CARTESIAN_POINT('',(-2.2,2.425,0.445));-#1757 = SURFACE_CURVE('',#1758,(#1762,#1769),.PCURVE_S1.);-#1758 = LINE('',#1759,#1760);-#1759 = CARTESIAN_POINT('',(-2.2,2.125,0.445));-#1760 = VECTOR('',#1761,1.);-#1761 = DIRECTION('',(0.,1.,0.));-#1762 = PCURVE('',#1486,#1763);-#1763 = DEFINITIONAL_REPRESENTATION('',(#1764),#1768);-#1764 = LINE('',#1765,#1766);-#1765 = CARTESIAN_POINT('',(0.,-0.15));-#1766 = VECTOR('',#1767,1.);-#1767 = DIRECTION('',(0.,1.));-#1768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1769 = PCURVE('',#1717,#1770);-#1770 = DEFINITIONAL_REPRESENTATION('',(#1771),#1775);-#1771 = LINE('',#1772,#1773);-#1772 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#1773 = VECTOR('',#1774,1.);-#1774 = DIRECTION('',(0.,1.));-#1775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1776 = ORIENTED_EDGE('',*,*,#1729,.T.);-#1777 = ORIENTED_EDGE('',*,*,#1468,.T.);-#1778 = ORIENTED_EDGE('',*,*,#1779,.F.);-#1779 = EDGE_CURVE('',#1755,#1471,#1780,.T.);-#1780 = SURFACE_CURVE('',#1781,(#1785,#1792),.PCURVE_S1.);-#1781 = LINE('',#1782,#1783);-#1782 = CARTESIAN_POINT('',(-2.2,2.425,0.445));-#1783 = VECTOR('',#1784,1.);-#1784 = DIRECTION('',(1.,0.,0.));-#1785 = PCURVE('',#1486,#1786);-#1786 = DEFINITIONAL_REPRESENTATION('',(#1787),#1791);-#1787 = LINE('',#1788,#1789);-#1788 = CARTESIAN_POINT('',(0.,0.15));-#1789 = VECTOR('',#1790,1.);-#1790 = DIRECTION('',(1.,0.));-#1791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1792 = PCURVE('',#1453,#1793);-#1793 = DEFINITIONAL_REPRESENTATION('',(#1794),#1798);-#1794 = LINE('',#1795,#1796);-#1795 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#1796 = VECTOR('',#1797,1.);-#1797 = DIRECTION('',(0.,1.));-#1798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1799 = ADVANCED_FACE('',(#1800),#1583,.F.);-#1800 = FACE_BOUND('',#1801,.F.);-#1801 = EDGE_LOOP('',(#1802,#1803,#1826,#1847));-#1802 = ORIENTED_EDGE('',*,*,#1622,.T.);-#1803 = ORIENTED_EDGE('',*,*,#1804,.F.);-#1804 = EDGE_CURVE('',#1805,#1623,#1807,.T.);-#1805 = VERTEX_POINT('',#1806);-#1806 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#1807 = SURFACE_CURVE('',#1808,(#1812,#1819),.PCURVE_S1.);-#1808 = LINE('',#1809,#1810);-#1809 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#1810 = VECTOR('',#1811,1.);-#1811 = DIRECTION('',(0.,-1.,0.));-#1812 = PCURVE('',#1583,#1813);-#1813 = DEFINITIONAL_REPRESENTATION('',(#1814),#1818);-#1814 = LINE('',#1815,#1816);-#1815 = CARTESIAN_POINT('',(0.5675,0.15));-#1816 = VECTOR('',#1817,1.);-#1817 = DIRECTION('',(0.,-1.));-#1818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1819 = PCURVE('',#1661,#1820);-#1820 = DEFINITIONAL_REPRESENTATION('',(#1821),#1825);-#1821 = LINE('',#1822,#1823);-#1822 = CARTESIAN_POINT('',(0.,0.15));-#1823 = VECTOR('',#1824,1.);-#1824 = DIRECTION('',(0.,-1.));-#1825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1826 = ORIENTED_EDGE('',*,*,#1827,.F.);-#1827 = EDGE_CURVE('',#1568,#1805,#1828,.T.);+#1749 = ORIENTED_EDGE('',*,*,#1656,.T.);+#1750 = ORIENTED_EDGE('',*,*,#1576,.F.);+#1751 = ORIENTED_EDGE('',*,*,#1752,.T.);+#1752 = EDGE_CURVE('',#1549,#1728,#1753,.T.);+#1753 = SURFACE_CURVE('',#1754,(#1758,#1765),.PCURVE_S1.);+#1754 = LINE('',#1755,#1756);+#1755 = CARTESIAN_POINT('',(-2.4875,2.425,0.));+#1756 = VECTOR('',#1757,1.);+#1757 = DIRECTION('',(0.,-1.,0.));+#1758 = PCURVE('',#1592,#1759);+#1759 = DEFINITIONAL_REPRESENTATION('',(#1760),#1764);+#1760 = LINE('',#1761,#1762);+#1761 = CARTESIAN_POINT('',(0.,0.15));+#1762 = VECTOR('',#1763,1.);+#1763 = DIRECTION('',(0.,-1.));+#1764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1765 = PCURVE('',#1564,#1766);+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.7175,0.15));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,-1.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = ADVANCED_FACE('',(#1773),#1564,.F.);+#1773 = FACE_BOUND('',#1774,.F.);+#1774 = EDGE_LOOP('',(#1775,#1798,#1799,#1800));+#1775 = ORIENTED_EDGE('',*,*,#1776,.T.);+#1776 = EDGE_CURVE('',#1777,#1728,#1779,.T.);+#1777 = VERTEX_POINT('',#1778);+#1778 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#1779 = SURFACE_CURVE('',#1780,(#1784,#1791),.PCURVE_S1.);+#1780 = LINE('',#1781,#1782);+#1781 = CARTESIAN_POINT('',(-3.205,2.125,0.));+#1782 = VECTOR('',#1783,1.);+#1783 = DIRECTION('',(1.,0.,0.));+#1784 = PCURVE('',#1564,#1785);+#1785 = DEFINITIONAL_REPRESENTATION('',(#1786),#1790);+#1786 = LINE('',#1787,#1788);+#1787 = CARTESIAN_POINT('',(0.,-0.15));+#1788 = VECTOR('',#1789,1.);+#1789 = DIRECTION('',(1.,0.));+#1790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1791 = PCURVE('',#1399,#1792);+#1792 = DEFINITIONAL_REPRESENTATION('',(#1793),#1797);+#1793 = LINE('',#1794,#1795);+#1794 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#1795 = VECTOR('',#1796,1.);+#1796 = DIRECTION('',(0.,1.));+#1797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1798 = ORIENTED_EDGE('',*,*,#1752,.F.);+#1799 = ORIENTED_EDGE('',*,*,#1548,.F.);+#1800 = ORIENTED_EDGE('',*,*,#1801,.T.);+#1801 = EDGE_CURVE('',#1521,#1777,#1802,.T.);+#1802 = SURFACE_CURVE('',#1803,(#1807,#1814),.PCURVE_S1.);+#1803 = LINE('',#1804,#1805);+#1804 = CARTESIAN_POINT('',(-3.205,2.425,0.));+#1805 = VECTOR('',#1806,1.);+#1806 = DIRECTION('',(0.,-1.,0.));+#1807 = PCURVE('',#1564,#1808);+#1808 = DEFINITIONAL_REPRESENTATION('',(#1809),#1813);+#1809 = LINE('',#1810,#1811);+#1810 = CARTESIAN_POINT('',(0.,0.15));+#1811 = VECTOR('',#1812,1.);+#1812 = DIRECTION('',(0.,-1.));+#1813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1814 = PCURVE('',#1536,#1815);+#1815 = DEFINITIONAL_REPRESENTATION('',(#1816),#1820);+#1816 = LINE('',#1817,#1818);+#1817 = CARTESIAN_POINT('',(0.15,0.15));+#1818 = VECTOR('',#1819,1.);+#1819 = DIRECTION('',(0.,-1.));+#1820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1821 = ADVANCED_FACE('',(#1822),#1536,.F.);+#1822 = FACE_BOUND('',#1823,.F.);+#1823 = EDGE_LOOP('',(#1824,#1847,#1848,#1849));+#1824 = ORIENTED_EDGE('',*,*,#1825,.T.);+#1825 = EDGE_CURVE('',#1826,#1777,#1828,.T.);+#1826 = VERTEX_POINT('',#1827);+#1827 = CARTESIAN_POINT('',(-3.205,2.125,0.15)); #1828 = SURFACE_CURVE('',#1829,(#1833,#1840),.PCURVE_S1.); #1829 = LINE('',#1830,#1831);-#1830 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1830 = CARTESIAN_POINT('',(-3.205,2.125,0.15)); #1831 = VECTOR('',#1832,1.);-#1832 = DIRECTION('',(-1.,0.,0.));-#1833 = PCURVE('',#1583,#1834);+#1832 = DIRECTION('',(0.,0.,-1.));+#1833 = PCURVE('',#1536,#1834); #1834 = DEFINITIONAL_REPRESENTATION('',(#1835),#1839); #1835 = LINE('',#1836,#1837);-#1836 = CARTESIAN_POINT('',(0.,0.15));+#1836 = CARTESIAN_POINT('',(0.,-0.15)); #1837 = VECTOR('',#1838,1.); #1838 = DIRECTION('',(1.,0.)); #1839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1840 = PCURVE('',#1453,#1841);+#1840 = PCURVE('',#1399,#1841); #1841 = DEFINITIONAL_REPRESENTATION('',(#1842),#1846); #1842 = LINE('',#1843,#1844);-#1843 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#1843 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #1844 = VECTOR('',#1845,1.);-#1845 = DIRECTION('',(0.,-1.));+#1845 = DIRECTION('',(1.,0.)); #1846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1847 = ORIENTED_EDGE('',*,*,#1567,.T.);-#1848 = ADVANCED_FACE('',(#1849),#1453,.F.);-#1849 = FACE_BOUND('',#1850,.F.);-#1850 = EDGE_LOOP('',(#1851,#1852,#1853,#1854,#1877,#1900,#1921,#1922));-#1851 = ORIENTED_EDGE('',*,*,#1439,.T.);-#1852 = ORIENTED_EDGE('',*,*,#1595,.T.);-#1853 = ORIENTED_EDGE('',*,*,#1827,.T.);-#1854 = ORIENTED_EDGE('',*,*,#1855,.T.);-#1855 = EDGE_CURVE('',#1805,#1856,#1858,.T.);-#1856 = VERTEX_POINT('',#1857);-#1857 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#1858 = SURFACE_CURVE('',#1859,(#1863,#1870),.PCURVE_S1.);-#1859 = LINE('',#1860,#1861);-#1860 = CARTESIAN_POINT('',(-3.205,2.425,0.15));-#1861 = VECTOR('',#1862,1.);-#1862 = DIRECTION('',(0.,0.,-1.));-#1863 = PCURVE('',#1453,#1864);+#1847 = ORIENTED_EDGE('',*,*,#1801,.F.);+#1848 = ORIENTED_EDGE('',*,*,#1520,.F.);+#1849 = ORIENTED_EDGE('',*,*,#1850,.T.);+#1850 = EDGE_CURVE('',#1493,#1826,#1851,.T.);+#1851 = SURFACE_CURVE('',#1852,(#1856,#1863),.PCURVE_S1.);+#1852 = LINE('',#1853,#1854);+#1853 = CARTESIAN_POINT('',(-3.205,2.425,0.15));+#1854 = VECTOR('',#1855,1.);+#1855 = DIRECTION('',(0.,-1.,0.));+#1856 = PCURVE('',#1536,#1857);+#1857 = DEFINITIONAL_REPRESENTATION('',(#1858),#1862);+#1858 = LINE('',#1859,#1860);+#1859 = CARTESIAN_POINT('',(0.,0.15));+#1860 = VECTOR('',#1861,1.);+#1861 = DIRECTION('',(0.,-1.));+#1862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1863 = PCURVE('',#1508,#1864); #1864 = DEFINITIONAL_REPRESENTATION('',(#1865),#1869); #1865 = LINE('',#1866,#1867);-#1866 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#1866 = CARTESIAN_POINT('',(0.5675,0.15)); #1867 = VECTOR('',#1868,1.);-#1868 = DIRECTION('',(1.,0.));+#1868 = DIRECTION('',(0.,-1.)); #1869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1870 = PCURVE('',#1661,#1871);-#1871 = DEFINITIONAL_REPRESENTATION('',(#1872),#1876);-#1872 = LINE('',#1873,#1874);-#1873 = CARTESIAN_POINT('',(0.,0.15));-#1874 = VECTOR('',#1875,1.);-#1875 = DIRECTION('',(1.,0.));-#1876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1877 = ORIENTED_EDGE('',*,*,#1878,.T.);-#1878 = EDGE_CURVE('',#1856,#1879,#1881,.T.);-#1879 = VERTEX_POINT('',#1880);-#1880 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#1881 = SURFACE_CURVE('',#1882,(#1886,#1893),.PCURVE_S1.);-#1882 = LINE('',#1883,#1884);-#1883 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#1884 = VECTOR('',#1885,1.);-#1885 = DIRECTION('',(1.,0.,0.));-#1886 = PCURVE('',#1453,#1887);-#1887 = DEFINITIONAL_REPRESENTATION('',(#1888),#1892);-#1888 = LINE('',#1889,#1890);-#1889 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#1890 = VECTOR('',#1891,1.);-#1891 = DIRECTION('',(0.,1.));-#1892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1893 = PCURVE('',#1689,#1894);-#1894 = DEFINITIONAL_REPRESENTATION('',(#1895),#1899);-#1895 = LINE('',#1896,#1897);-#1896 = CARTESIAN_POINT('',(0.,0.15));-#1897 = VECTOR('',#1898,1.);-#1898 = DIRECTION('',(1.,0.));-#1899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1900 = ORIENTED_EDGE('',*,*,#1901,.T.);-#1901 = EDGE_CURVE('',#1879,#1755,#1902,.T.);-#1902 = SURFACE_CURVE('',#1903,(#1907,#1914),.PCURVE_S1.);-#1903 = LINE('',#1904,#1905);-#1904 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#1905 = VECTOR('',#1906,1.);-#1906 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#1907 = PCURVE('',#1453,#1908);-#1908 = DEFINITIONAL_REPRESENTATION('',(#1909),#1913);-#1909 = LINE('',#1910,#1911);-#1910 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#1911 = VECTOR('',#1912,1.);-#1912 = DIRECTION('',(-0.839949759337,0.542664170358));-#1913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1914 = PCURVE('',#1717,#1915);-#1915 = DEFINITIONAL_REPRESENTATION('',(#1916),#1920);-#1916 = LINE('',#1917,#1918);-#1917 = CARTESIAN_POINT('',(0.,0.15));-#1918 = VECTOR('',#1919,1.);-#1919 = DIRECTION('',(1.,0.));-#1920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1921 = ORIENTED_EDGE('',*,*,#1779,.T.);-#1922 = ORIENTED_EDGE('',*,*,#1520,.T.);-#1923 = ADVANCED_FACE('',(#1924),#1661,.F.);-#1924 = FACE_BOUND('',#1925,.F.);-#1925 = EDGE_LOOP('',(#1926,#1927,#1948,#1949));-#1926 = ORIENTED_EDGE('',*,*,#1645,.T.);-#1927 = ORIENTED_EDGE('',*,*,#1928,.F.);-#1928 = EDGE_CURVE('',#1856,#1646,#1929,.T.);-#1929 = SURFACE_CURVE('',#1930,(#1934,#1941),.PCURVE_S1.);-#1930 = LINE('',#1931,#1932);-#1931 = CARTESIAN_POINT('',(-3.205,2.425,0.));-#1932 = VECTOR('',#1933,1.);-#1933 = DIRECTION('',(0.,-1.,0.));-#1934 = PCURVE('',#1661,#1935);-#1935 = DEFINITIONAL_REPRESENTATION('',(#1936),#1940);-#1936 = LINE('',#1937,#1938);-#1937 = CARTESIAN_POINT('',(0.15,0.15));-#1938 = VECTOR('',#1939,1.);-#1939 = DIRECTION('',(0.,-1.));-#1940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1941 = PCURVE('',#1689,#1942);-#1942 = DEFINITIONAL_REPRESENTATION('',(#1943),#1947);-#1943 = LINE('',#1944,#1945);-#1944 = CARTESIAN_POINT('',(0.,0.15));-#1945 = VECTOR('',#1946,1.);-#1946 = DIRECTION('',(0.,-1.));-#1947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1948 = ORIENTED_EDGE('',*,*,#1855,.F.);-#1949 = ORIENTED_EDGE('',*,*,#1804,.T.);-#1950 = ADVANCED_FACE('',(#1951),#1689,.F.);-#1951 = FACE_BOUND('',#1952,.F.);-#1952 = EDGE_LOOP('',(#1953,#1954,#1975,#1976));-#1953 = ORIENTED_EDGE('',*,*,#1673,.T.);-#1954 = ORIENTED_EDGE('',*,*,#1955,.F.);-#1955 = EDGE_CURVE('',#1879,#1674,#1956,.T.);-#1956 = SURFACE_CURVE('',#1957,(#1961,#1968),.PCURVE_S1.);-#1957 = LINE('',#1958,#1959);-#1958 = CARTESIAN_POINT('',(-2.4875,2.425,0.));-#1959 = VECTOR('',#1960,1.);-#1960 = DIRECTION('',(0.,-1.,0.));-#1961 = PCURVE('',#1689,#1962);-#1962 = DEFINITIONAL_REPRESENTATION('',(#1963),#1967);-#1963 = LINE('',#1964,#1965);-#1964 = CARTESIAN_POINT('',(0.7175,0.15));-#1965 = VECTOR('',#1966,1.);-#1966 = DIRECTION('',(0.,-1.));-#1967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1968 = PCURVE('',#1717,#1969);-#1969 = DEFINITIONAL_REPRESENTATION('',(#1970),#1974);-#1970 = LINE('',#1971,#1972);-#1971 = CARTESIAN_POINT('',(0.,0.15));-#1972 = VECTOR('',#1973,1.);-#1973 = DIRECTION('',(0.,-1.));-#1974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1975 = ORIENTED_EDGE('',*,*,#1878,.F.);-#1976 = ORIENTED_EDGE('',*,*,#1928,.T.);-#1977 = ADVANCED_FACE('',(#1978),#1717,.F.);+#1870 = ADVANCED_FACE('',(#1871),#1508,.F.);+#1871 = FACE_BOUND('',#1872,.F.);+#1872 = EDGE_LOOP('',(#1873,#1896,#1897,#1898));+#1873 = ORIENTED_EDGE('',*,*,#1874,.T.);+#1874 = EDGE_CURVE('',#1875,#1826,#1877,.T.);+#1875 = VERTEX_POINT('',#1876);+#1876 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#1877 = SURFACE_CURVE('',#1878,(#1882,#1889),.PCURVE_S1.);+#1878 = LINE('',#1879,#1880);+#1879 = CARTESIAN_POINT('',(-2.6375,2.125,0.15));+#1880 = VECTOR('',#1881,1.);+#1881 = DIRECTION('',(-1.,0.,0.));+#1882 = PCURVE('',#1508,#1883);+#1883 = DEFINITIONAL_REPRESENTATION('',(#1884),#1888);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(0.,-0.15));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(1.,0.));+#1888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1889 = PCURVE('',#1399,#1890);+#1890 = DEFINITIONAL_REPRESENTATION('',(#1891),#1895);+#1891 = LINE('',#1892,#1893);+#1892 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#1893 = VECTOR('',#1894,1.);+#1894 = DIRECTION('',(0.,-1.));+#1895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1896 = ORIENTED_EDGE('',*,*,#1850,.F.);+#1897 = ORIENTED_EDGE('',*,*,#1492,.F.);+#1898 = ORIENTED_EDGE('',*,*,#1899,.T.);+#1899 = EDGE_CURVE('',#1470,#1875,#1900,.T.);+#1900 = SURFACE_CURVE('',#1901,(#1905,#1912),.PCURVE_S1.);+#1901 = LINE('',#1902,#1903);+#1902 = CARTESIAN_POINT('',(-2.6375,2.425,0.15));+#1903 = VECTOR('',#1904,1.);+#1904 = DIRECTION('',(0.,-1.,0.));+#1905 = PCURVE('',#1508,#1906);+#1906 = DEFINITIONAL_REPRESENTATION('',(#1907),#1911);+#1907 = LINE('',#1908,#1909);+#1908 = CARTESIAN_POINT('',(0.,0.15));+#1909 = VECTOR('',#1910,1.);+#1910 = DIRECTION('',(0.,-1.));+#1911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1912 = PCURVE('',#1427,#1913);+#1913 = DEFINITIONAL_REPRESENTATION('',(#1914),#1918);+#1914 = LINE('',#1915,#1916);+#1915 = CARTESIAN_POINT('',(0.529793591883,0.15));+#1916 = VECTOR('',#1917,1.);+#1917 = DIRECTION('',(-0.,-1.));+#1918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1919 = ADVANCED_FACE('',(#1920),#1427,.F.);+#1920 = FACE_BOUND('',#1921,.F.);+#1921 = EDGE_LOOP('',(#1922,#1943,#1944,#1945));+#1922 = ORIENTED_EDGE('',*,*,#1923,.T.);+#1923 = EDGE_CURVE('',#1384,#1875,#1924,.T.);+#1924 = SURFACE_CURVE('',#1925,(#1929,#1936),.PCURVE_S1.);+#1925 = LINE('',#1926,#1927);+#1926 = CARTESIAN_POINT('',(-2.35,2.125,0.595));+#1927 = VECTOR('',#1928,1.);+#1928 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#1929 = PCURVE('',#1427,#1930);+#1930 = DEFINITIONAL_REPRESENTATION('',(#1931),#1935);+#1931 = LINE('',#1932,#1933);+#1932 = CARTESIAN_POINT('',(-0.,-0.15));+#1933 = VECTOR('',#1934,1.);+#1934 = DIRECTION('',(1.,0.));+#1935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1936 = PCURVE('',#1399,#1937);+#1937 = DEFINITIONAL_REPRESENTATION('',(#1938),#1942);+#1938 = LINE('',#1939,#1940);+#1939 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#1940 = VECTOR('',#1941,1.);+#1941 = DIRECTION('',(0.839949759337,-0.542664170358));+#1942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1943 = ORIENTED_EDGE('',*,*,#1899,.F.);+#1944 = ORIENTED_EDGE('',*,*,#1469,.F.);+#1945 = ORIENTED_EDGE('',*,*,#1411,.T.);+#1946 = ADVANCED_FACE('',(#1947),#1399,.T.);+#1947 = FACE_BOUND('',#1948,.T.);+#1948 = EDGE_LOOP('',(#1949,#1950,#1951,#1952,#1953,#1954,#1955,#1956));+#1949 = ORIENTED_EDGE('',*,*,#1383,.T.);+#1950 = ORIENTED_EDGE('',*,*,#1923,.T.);+#1951 = ORIENTED_EDGE('',*,*,#1874,.T.);+#1952 = ORIENTED_EDGE('',*,*,#1825,.T.);+#1953 = ORIENTED_EDGE('',*,*,#1776,.T.);+#1954 = ORIENTED_EDGE('',*,*,#1727,.T.);+#1955 = ORIENTED_EDGE('',*,*,#1679,.T.);+#1956 = ORIENTED_EDGE('',*,*,#1957,.T.);+#1957 = EDGE_CURVE('',#1680,#1349,#1958,.T.);+#1958 = SURFACE_CURVE('',#1959,(#1963,#1970),.PCURVE_S1.);+#1959 = LINE('',#1960,#1961);+#1960 = CARTESIAN_POINT('',(-2.15,2.125,0.445));+#1961 = VECTOR('',#1962,1.);+#1962 = DIRECTION('',(0.,0.,1.));+#1963 = PCURVE('',#1399,#1964);+#1964 = DEFINITIONAL_REPRESENTATION('',(#1965),#1969);+#1965 = LINE('',#1966,#1967);+#1966 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#1967 = VECTOR('',#1968,1.);+#1968 = DIRECTION('',(-1.,0.));+#1969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1970 = PCURVE('',#1371,#1971);+#1971 = DEFINITIONAL_REPRESENTATION('',(#1972),#1976);+#1972 = LINE('',#1973,#1974);+#1973 = CARTESIAN_POINT('',(0.,-0.15));+#1974 = VECTOR('',#1975,1.);+#1975 = DIRECTION('',(1.,0.));+#1976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1977 = ADVANCED_FACE('',(#1978),#1371,.F.); #1978 = FACE_BOUND('',#1979,.F.); #1979 = EDGE_LOOP('',(#1980,#1981,#1982,#1983));-#1980 = ORIENTED_EDGE('',*,*,#1701,.T.);-#1981 = ORIENTED_EDGE('',*,*,#1754,.T.);-#1982 = ORIENTED_EDGE('',*,*,#1901,.F.);-#1983 = ORIENTED_EDGE('',*,*,#1955,.T.);+#1980 = ORIENTED_EDGE('',*,*,#1702,.F.);+#1981 = ORIENTED_EDGE('',*,*,#1957,.T.);+#1982 = ORIENTED_EDGE('',*,*,#1348,.T.);+#1983 = ORIENTED_EDGE('',*,*,#1632,.F.); #1984 = MANIFOLD_SOLID_BREP('',#1985);-#1985 = CLOSED_SHELL('',(#1986,#2106,#2182,#2258,#2392,#2441,#2490,#2565- ,#2592,#2619));+#1985 = CLOSED_SHELL('',(#1986,#2106,#2294,#2365,#2414,#2463,#2512,#2561+ ,#2588,#2619)); #1986 = ADVANCED_FACE('',(#1987),#2001,.F.); #1987 = FACE_BOUND('',#1988,.F.); #1988 = EDGE_LOOP('',(#1989,#2024,#2052,#2080));@@ -2439,609 +2439,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2106 = ADVANCED_FACE('',(#2107),#2013,.F.);+#2106 = ADVANCED_FACE('',(#2107),#2095,.F.); #2107 = FACE_BOUND('',#2108,.F.);-#2108 = EDGE_LOOP('',(#2109,#2139,#2160,#2161));-#2109 = ORIENTED_EDGE('',*,*,#2110,.F.);-#2110 = EDGE_CURVE('',#2111,#2113,#2115,.T.);-#2111 = VERTEX_POINT('',#2112);-#2112 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#2113 = VERTEX_POINT('',#2114);-#2114 = CARTESIAN_POINT('',(-2.15,1.775,0.445));-#2115 = SURFACE_CURVE('',#2116,(#2120,#2127),.PCURVE_S1.);-#2116 = LINE('',#2117,#2118);-#2117 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#2118 = VECTOR('',#2119,1.);-#2119 = DIRECTION('',(0.,1.,0.));-#2120 = PCURVE('',#2013,#2121);-#2121 = DEFINITIONAL_REPRESENTATION('',(#2122),#2126);-#2122 = LINE('',#2123,#2124);-#2123 = CARTESIAN_POINT('',(0.,-0.15));-#2124 = VECTOR('',#2125,1.);-#2125 = DIRECTION('',(0.,1.));-#2126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2127 = PCURVE('',#2128,#2133);-#2128 = PLANE('',#2129);-#2129 = AXIS2_PLACEMENT_3D('',#2130,#2131,#2132);-#2130 = CARTESIAN_POINT('',(-2.2,1.625,0.445));-#2131 = DIRECTION('',(-0.,0.,1.));-#2132 = DIRECTION('',(1.,0.,0.));-#2133 = DEFINITIONAL_REPRESENTATION('',(#2134),#2138);-#2134 = LINE('',#2135,#2136);-#2135 = CARTESIAN_POINT('',(5.E-02,-0.15));-#2136 = VECTOR('',#2137,1.);-#2137 = DIRECTION('',(0.,1.));-#2138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2139 = ORIENTED_EDGE('',*,*,#2140,.T.);-#2140 = EDGE_CURVE('',#2111,#1991,#2141,.T.);-#2141 = SURFACE_CURVE('',#2142,(#2146,#2153),.PCURVE_S1.);-#2142 = LINE('',#2143,#2144);-#2143 = CARTESIAN_POINT('',(-2.15,1.475,0.445));-#2144 = VECTOR('',#2145,1.);-#2145 = DIRECTION('',(0.,0.,1.));-#2146 = PCURVE('',#2013,#2147);-#2147 = DEFINITIONAL_REPRESENTATION('',(#2148),#2152);-#2148 = LINE('',#2149,#2150);-#2149 = CARTESIAN_POINT('',(0.,-0.15));-#2150 = VECTOR('',#2151,1.);-#2151 = DIRECTION('',(1.,0.));-#2152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2153 = PCURVE('',#2041,#2154);-#2154 = DEFINITIONAL_REPRESENTATION('',(#2155),#2159);-#2155 = LINE('',#2156,#2157);-#2156 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#2157 = VECTOR('',#2158,1.);-#2158 = DIRECTION('',(-1.,0.));-#2159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2160 = ORIENTED_EDGE('',*,*,#1990,.T.);-#2161 = ORIENTED_EDGE('',*,*,#2162,.F.);-#2162 = EDGE_CURVE('',#2113,#1993,#2163,.T.);-#2163 = SURFACE_CURVE('',#2164,(#2168,#2175),.PCURVE_S1.);-#2164 = LINE('',#2165,#2166);-#2165 = CARTESIAN_POINT('',(-2.15,1.775,0.445));-#2166 = VECTOR('',#2167,1.);-#2167 = DIRECTION('',(0.,0.,1.));-#2168 = PCURVE('',#2013,#2169);-#2169 = DEFINITIONAL_REPRESENTATION('',(#2170),#2174);-#2170 = LINE('',#2171,#2172);-#2171 = CARTESIAN_POINT('',(0.,0.15));-#2172 = VECTOR('',#2173,1.);-#2173 = DIRECTION('',(1.,0.));-#2174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2175 = PCURVE('',#2095,#2176);-#2176 = DEFINITIONAL_REPRESENTATION('',(#2177),#2181);-#2177 = LINE('',#2178,#2179);-#2178 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#2179 = VECTOR('',#2180,1.);-#2180 = DIRECTION('',(-1.,0.));-#2181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2182 = ADVANCED_FACE('',(#2183),#2069,.F.);-#2183 = FACE_BOUND('',#2184,.F.);-#2184 = EDGE_LOOP('',(#2185,#2208,#2236,#2257));-#2185 = ORIENTED_EDGE('',*,*,#2186,.T.);-#2186 = EDGE_CURVE('',#2026,#2187,#2189,.T.);-#2187 = VERTEX_POINT('',#2188);-#2188 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));-#2189 = SURFACE_CURVE('',#2190,(#2194,#2201),.PCURVE_S1.);-#2190 = LINE('',#2191,#2192);-#2191 = CARTESIAN_POINT('',(-2.35,1.475,0.595));-#2192 = VECTOR('',#2193,1.);-#2193 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2194 = PCURVE('',#2069,#2195);-#2195 = DEFINITIONAL_REPRESENTATION('',(#2196),#2200);-#2196 = LINE('',#2197,#2198);-#2197 = CARTESIAN_POINT('',(-0.,-0.15));-#2198 = VECTOR('',#2199,1.);-#2199 = DIRECTION('',(1.,0.));-#2200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2201 = PCURVE('',#2041,#2202);-#2202 = DEFINITIONAL_REPRESENTATION('',(#2203),#2207);-#2203 = LINE('',#2204,#2205);-#2204 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#2205 = VECTOR('',#2206,1.);-#2206 = DIRECTION('',(0.839949759337,-0.542664170358));-#2207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2208 = ORIENTED_EDGE('',*,*,#2209,.F.);-#2209 = EDGE_CURVE('',#2210,#2187,#2212,.T.);-#2210 = VERTEX_POINT('',#2211);-#2211 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));-#2212 = SURFACE_CURVE('',#2213,(#2217,#2224),.PCURVE_S1.);-#2213 = LINE('',#2214,#2215);-#2214 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));-#2215 = VECTOR('',#2216,1.);-#2216 = DIRECTION('',(0.,-1.,0.));-#2217 = PCURVE('',#2069,#2218);-#2218 = DEFINITIONAL_REPRESENTATION('',(#2219),#2223);-#2219 = LINE('',#2220,#2221);-#2220 = CARTESIAN_POINT('',(0.529793591883,0.15));-#2221 = VECTOR('',#2222,1.);-#2222 = DIRECTION('',(-0.,-1.));-#2223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2224 = PCURVE('',#2225,#2230);-#2225 = PLANE('',#2226);-#2226 = AXIS2_PLACEMENT_3D('',#2227,#2228,#2229);-#2227 = CARTESIAN_POINT('',(-2.6375,1.625,0.15));-#2228 = DIRECTION('',(-0.,-0.,-1.));-#2229 = DIRECTION('',(-1.,0.,0.));-#2230 = DEFINITIONAL_REPRESENTATION('',(#2231),#2235);-#2231 = LINE('',#2232,#2233);-#2232 = CARTESIAN_POINT('',(0.,0.15));-#2233 = VECTOR('',#2234,1.);-#2234 = DIRECTION('',(0.,-1.));-#2235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2236 = ORIENTED_EDGE('',*,*,#2237,.F.);-#2237 = EDGE_CURVE('',#2054,#2210,#2238,.T.);-#2238 = SURFACE_CURVE('',#2239,(#2243,#2250),.PCURVE_S1.);-#2239 = LINE('',#2240,#2241);-#2240 = CARTESIAN_POINT('',(-2.35,1.775,0.595));-#2241 = VECTOR('',#2242,1.);-#2242 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2243 = PCURVE('',#2069,#2244);-#2244 = DEFINITIONAL_REPRESENTATION('',(#2245),#2249);-#2245 = LINE('',#2246,#2247);-#2246 = CARTESIAN_POINT('',(0.,0.15));-#2247 = VECTOR('',#2248,1.);-#2248 = DIRECTION('',(1.,0.));-#2249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2250 = PCURVE('',#2095,#2251);-#2251 = DEFINITIONAL_REPRESENTATION('',(#2252),#2256);-#2252 = LINE('',#2253,#2254);-#2253 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#2254 = VECTOR('',#2255,1.);-#2255 = DIRECTION('',(0.839949759337,-0.542664170358));-#2256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2257 = ORIENTED_EDGE('',*,*,#2053,.T.);-#2258 = ADVANCED_FACE('',(#2259),#2041,.T.);-#2259 = FACE_BOUND('',#2260,.T.);-#2260 = EDGE_LOOP('',(#2261,#2262,#2263,#2286,#2314,#2342,#2370,#2391));-#2261 = ORIENTED_EDGE('',*,*,#2025,.T.);-#2262 = ORIENTED_EDGE('',*,*,#2186,.T.);-#2263 = ORIENTED_EDGE('',*,*,#2264,.T.);-#2264 = EDGE_CURVE('',#2187,#2265,#2267,.T.);-#2265 = VERTEX_POINT('',#2266);-#2266 = CARTESIAN_POINT('',(-3.205,1.475,0.15));-#2267 = SURFACE_CURVE('',#2268,(#2272,#2279),.PCURVE_S1.);+#2108 = EDGE_LOOP('',(#2109,#2110,#2133,#2161,#2189,#2217,#2245,#2273));+#2109 = ORIENTED_EDGE('',*,*,#2081,.T.);+#2110 = ORIENTED_EDGE('',*,*,#2111,.T.);+#2111 = EDGE_CURVE('',#2054,#2112,#2114,.T.);+#2112 = VERTEX_POINT('',#2113);+#2113 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2114 = SURFACE_CURVE('',#2115,(#2119,#2126),.PCURVE_S1.);+#2115 = LINE('',#2116,#2117);+#2116 = CARTESIAN_POINT('',(-2.35,1.775,0.595));+#2117 = VECTOR('',#2118,1.);+#2118 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2119 = PCURVE('',#2095,#2120);+#2120 = DEFINITIONAL_REPRESENTATION('',(#2121),#2125);+#2121 = LINE('',#2122,#2123);+#2122 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2123 = VECTOR('',#2124,1.);+#2124 = DIRECTION('',(0.839949759337,-0.542664170358));+#2125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2126 = PCURVE('',#2069,#2127);+#2127 = DEFINITIONAL_REPRESENTATION('',(#2128),#2132);+#2128 = LINE('',#2129,#2130);+#2129 = CARTESIAN_POINT('',(0.,0.15));+#2130 = VECTOR('',#2131,1.);+#2131 = DIRECTION('',(1.,0.));+#2132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2133 = ORIENTED_EDGE('',*,*,#2134,.T.);+#2134 = EDGE_CURVE('',#2112,#2135,#2137,.T.);+#2135 = VERTEX_POINT('',#2136);+#2136 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2137 = SURFACE_CURVE('',#2138,(#2142,#2149),.PCURVE_S1.);+#2138 = LINE('',#2139,#2140);+#2139 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2140 = VECTOR('',#2141,1.);+#2141 = DIRECTION('',(-1.,0.,0.));+#2142 = PCURVE('',#2095,#2143);+#2143 = DEFINITIONAL_REPRESENTATION('',(#2144),#2148);+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(0.,-1.));+#2148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2149 = PCURVE('',#2150,#2155);+#2150 = PLANE('',#2151);+#2151 = AXIS2_PLACEMENT_3D('',#2152,#2153,#2154);+#2152 = CARTESIAN_POINT('',(-2.6375,1.625,0.15));+#2153 = DIRECTION('',(-0.,-0.,-1.));+#2154 = DIRECTION('',(-1.,0.,0.));+#2155 = DEFINITIONAL_REPRESENTATION('',(#2156),#2160);+#2156 = LINE('',#2157,#2158);+#2157 = CARTESIAN_POINT('',(0.,0.15));+#2158 = VECTOR('',#2159,1.);+#2159 = DIRECTION('',(1.,0.));+#2160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2161 = ORIENTED_EDGE('',*,*,#2162,.T.);+#2162 = EDGE_CURVE('',#2135,#2163,#2165,.T.);+#2163 = VERTEX_POINT('',#2164);+#2164 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2165 = SURFACE_CURVE('',#2166,(#2170,#2177),.PCURVE_S1.);+#2166 = LINE('',#2167,#2168);+#2167 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2168 = VECTOR('',#2169,1.);+#2169 = DIRECTION('',(0.,0.,-1.));+#2170 = PCURVE('',#2095,#2171);+#2171 = DEFINITIONAL_REPRESENTATION('',(#2172),#2176);+#2172 = LINE('',#2173,#2174);+#2173 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2174 = VECTOR('',#2175,1.);+#2175 = DIRECTION('',(1.,0.));+#2176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2177 = PCURVE('',#2178,#2183);+#2178 = PLANE('',#2179);+#2179 = AXIS2_PLACEMENT_3D('',#2180,#2181,#2182);+#2180 = CARTESIAN_POINT('',(-3.205,1.625,0.15));+#2181 = DIRECTION('',(1.,0.,0.));+#2182 = DIRECTION('',(0.,0.,-1.));+#2183 = DEFINITIONAL_REPRESENTATION('',(#2184),#2188);+#2184 = LINE('',#2185,#2186);+#2185 = CARTESIAN_POINT('',(0.,0.15));+#2186 = VECTOR('',#2187,1.);+#2187 = DIRECTION('',(1.,0.));+#2188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2189 = ORIENTED_EDGE('',*,*,#2190,.T.);+#2190 = EDGE_CURVE('',#2163,#2191,#2193,.T.);+#2191 = VERTEX_POINT('',#2192);+#2192 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2193 = SURFACE_CURVE('',#2194,(#2198,#2205),.PCURVE_S1.);+#2194 = LINE('',#2195,#2196);+#2195 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2196 = VECTOR('',#2197,1.);+#2197 = DIRECTION('',(1.,0.,0.));+#2198 = PCURVE('',#2095,#2199);+#2199 = DEFINITIONAL_REPRESENTATION('',(#2200),#2204);+#2200 = LINE('',#2201,#2202);+#2201 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2202 = VECTOR('',#2203,1.);+#2203 = DIRECTION('',(0.,1.));+#2204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2205 = PCURVE('',#2206,#2211);+#2206 = PLANE('',#2207);+#2207 = AXIS2_PLACEMENT_3D('',#2208,#2209,#2210);+#2208 = CARTESIAN_POINT('',(-3.205,1.625,0.));+#2209 = DIRECTION('',(-0.,0.,1.));+#2210 = DIRECTION('',(1.,0.,0.));+#2211 = DEFINITIONAL_REPRESENTATION('',(#2212),#2216);+#2212 = LINE('',#2213,#2214);+#2213 = CARTESIAN_POINT('',(0.,0.15));+#2214 = VECTOR('',#2215,1.);+#2215 = DIRECTION('',(1.,0.));+#2216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2217 = ORIENTED_EDGE('',*,*,#2218,.T.);+#2218 = EDGE_CURVE('',#2191,#2219,#2221,.T.);+#2219 = VERTEX_POINT('',#2220);+#2220 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#2221 = SURFACE_CURVE('',#2222,(#2226,#2233),.PCURVE_S1.);+#2222 = LINE('',#2223,#2224);+#2223 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2224 = VECTOR('',#2225,1.);+#2225 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2226 = PCURVE('',#2095,#2227);+#2227 = DEFINITIONAL_REPRESENTATION('',(#2228),#2232);+#2228 = LINE('',#2229,#2230);+#2229 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2230 = VECTOR('',#2231,1.);+#2231 = DIRECTION('',(-0.839949759337,0.542664170358));+#2232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2233 = PCURVE('',#2234,#2239);+#2234 = PLANE('',#2235);+#2235 = AXIS2_PLACEMENT_3D('',#2236,#2237,#2238);+#2236 = CARTESIAN_POINT('',(-2.4875,1.625,0.));+#2237 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2238 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2239 = DEFINITIONAL_REPRESENTATION('',(#2240),#2244);+#2240 = LINE('',#2241,#2242);+#2241 = CARTESIAN_POINT('',(0.,0.15));+#2242 = VECTOR('',#2243,1.);+#2243 = DIRECTION('',(1.,0.));+#2244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2245 = ORIENTED_EDGE('',*,*,#2246,.T.);+#2246 = EDGE_CURVE('',#2219,#2247,#2249,.T.);+#2247 = VERTEX_POINT('',#2248);+#2248 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#2249 = SURFACE_CURVE('',#2250,(#2254,#2261),.PCURVE_S1.);+#2250 = LINE('',#2251,#2252);+#2251 = CARTESIAN_POINT('',(-2.2,1.775,0.445));+#2252 = VECTOR('',#2253,1.);+#2253 = DIRECTION('',(1.,0.,0.));+#2254 = PCURVE('',#2095,#2255);+#2255 = DEFINITIONAL_REPRESENTATION('',(#2256),#2260);+#2256 = LINE('',#2257,#2258);+#2257 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2258 = VECTOR('',#2259,1.);+#2259 = DIRECTION('',(0.,1.));+#2260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2261 = PCURVE('',#2262,#2267);+#2262 = PLANE('',#2263);+#2263 = AXIS2_PLACEMENT_3D('',#2264,#2265,#2266);+#2264 = CARTESIAN_POINT('',(-2.2,1.625,0.445));+#2265 = DIRECTION('',(-0.,0.,1.));+#2266 = DIRECTION('',(1.,0.,0.));+#2267 = DEFINITIONAL_REPRESENTATION('',(#2268),#2272); #2268 = LINE('',#2269,#2270);-#2269 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#2269 = CARTESIAN_POINT('',(0.,0.15)); #2270 = VECTOR('',#2271,1.);-#2271 = DIRECTION('',(-1.,0.,0.));-#2272 = PCURVE('',#2041,#2273);-#2273 = DEFINITIONAL_REPRESENTATION('',(#2274),#2278);-#2274 = LINE('',#2275,#2276);-#2275 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#2276 = VECTOR('',#2277,1.);-#2277 = DIRECTION('',(0.,-1.));-#2278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2279 = PCURVE('',#2225,#2280);-#2280 = DEFINITIONAL_REPRESENTATION('',(#2281),#2285);-#2281 = LINE('',#2282,#2283);-#2282 = CARTESIAN_POINT('',(0.,-0.15));-#2283 = VECTOR('',#2284,1.);-#2284 = DIRECTION('',(1.,0.));-#2285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2286 = ORIENTED_EDGE('',*,*,#2287,.T.);-#2287 = EDGE_CURVE('',#2265,#2288,#2290,.T.);-#2288 = VERTEX_POINT('',#2289);-#2289 = CARTESIAN_POINT('',(-3.205,1.475,0.));-#2290 = SURFACE_CURVE('',#2291,(#2295,#2302),.PCURVE_S1.);-#2291 = LINE('',#2292,#2293);-#2292 = CARTESIAN_POINT('',(-3.205,1.475,0.15));-#2293 = VECTOR('',#2294,1.);-#2294 = DIRECTION('',(0.,0.,-1.));-#2295 = PCURVE('',#2041,#2296);-#2296 = DEFINITIONAL_REPRESENTATION('',(#2297),#2301);-#2297 = LINE('',#2298,#2299);-#2298 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#2299 = VECTOR('',#2300,1.);-#2300 = DIRECTION('',(1.,0.));-#2301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2302 = PCURVE('',#2303,#2308);-#2303 = PLANE('',#2304);-#2304 = AXIS2_PLACEMENT_3D('',#2305,#2306,#2307);-#2305 = CARTESIAN_POINT('',(-3.205,1.625,0.15));-#2306 = DIRECTION('',(1.,0.,0.));-#2307 = DIRECTION('',(0.,0.,-1.));-#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);-#2309 = LINE('',#2310,#2311);-#2310 = CARTESIAN_POINT('',(0.,-0.15));-#2311 = VECTOR('',#2312,1.);-#2312 = DIRECTION('',(1.,0.));-#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2314 = ORIENTED_EDGE('',*,*,#2315,.T.);-#2315 = EDGE_CURVE('',#2288,#2316,#2318,.T.);-#2316 = VERTEX_POINT('',#2317);-#2317 = CARTESIAN_POINT('',(-2.4875,1.475,0.));-#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);-#2319 = LINE('',#2320,#2321);-#2320 = CARTESIAN_POINT('',(-3.205,1.475,0.));-#2321 = VECTOR('',#2322,1.);-#2322 = DIRECTION('',(1.,0.,0.));-#2323 = PCURVE('',#2041,#2324);-#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2271 = DIRECTION('',(1.,0.));+#2272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2273 = ORIENTED_EDGE('',*,*,#2274,.T.);+#2274 = EDGE_CURVE('',#2247,#1993,#2275,.T.);+#2275 = SURFACE_CURVE('',#2276,(#2280,#2287),.PCURVE_S1.);+#2276 = LINE('',#2277,#2278);+#2277 = CARTESIAN_POINT('',(-2.15,1.775,0.445));+#2278 = VECTOR('',#2279,1.);+#2279 = DIRECTION('',(0.,0.,1.));+#2280 = PCURVE('',#2095,#2281);+#2281 = DEFINITIONAL_REPRESENTATION('',(#2282),#2286);+#2282 = LINE('',#2283,#2284);+#2283 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2284 = VECTOR('',#2285,1.);+#2285 = DIRECTION('',(-1.,0.));+#2286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2287 = PCURVE('',#2013,#2288);+#2288 = DEFINITIONAL_REPRESENTATION('',(#2289),#2293);+#2289 = LINE('',#2290,#2291);+#2290 = CARTESIAN_POINT('',(0.,0.15));+#2291 = VECTOR('',#2292,1.);+#2292 = DIRECTION('',(1.,0.));+#2293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2294 = ADVANCED_FACE('',(#2295),#2262,.F.);+#2295 = FACE_BOUND('',#2296,.F.);+#2296 = EDGE_LOOP('',(#2297,#2320,#2343,#2364));+#2297 = ORIENTED_EDGE('',*,*,#2298,.F.);+#2298 = EDGE_CURVE('',#2299,#2219,#2301,.T.);+#2299 = VERTEX_POINT('',#2300);+#2300 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2301 = SURFACE_CURVE('',#2302,(#2306,#2313),.PCURVE_S1.);+#2302 = LINE('',#2303,#2304);+#2303 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2304 = VECTOR('',#2305,1.);+#2305 = DIRECTION('',(0.,1.,0.));+#2306 = PCURVE('',#2262,#2307);+#2307 = DEFINITIONAL_REPRESENTATION('',(#2308),#2312);+#2308 = LINE('',#2309,#2310);+#2309 = CARTESIAN_POINT('',(0.,-0.15));+#2310 = VECTOR('',#2311,1.);+#2311 = DIRECTION('',(0.,1.));+#2312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2313 = PCURVE('',#2234,#2314);+#2314 = DEFINITIONAL_REPRESENTATION('',(#2315),#2319);+#2315 = LINE('',#2316,#2317);+#2316 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#2317 = VECTOR('',#2318,1.);+#2318 = DIRECTION('',(0.,1.));+#2319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2320 = ORIENTED_EDGE('',*,*,#2321,.T.);+#2321 = EDGE_CURVE('',#2299,#2322,#2324,.T.);+#2322 = VERTEX_POINT('',#2323);+#2323 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2324 = SURFACE_CURVE('',#2325,(#2329,#2336),.PCURVE_S1.); #2325 = LINE('',#2326,#2327);-#2326 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2326 = CARTESIAN_POINT('',(-2.2,1.475,0.445)); #2327 = VECTOR('',#2328,1.);-#2328 = DIRECTION('',(0.,1.));-#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2330 = PCURVE('',#2331,#2336);-#2331 = PLANE('',#2332);-#2332 = AXIS2_PLACEMENT_3D('',#2333,#2334,#2335);-#2333 = CARTESIAN_POINT('',(-3.205,1.625,0.));-#2334 = DIRECTION('',(-0.,0.,1.));-#2335 = DIRECTION('',(1.,0.,0.));-#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341);-#2337 = LINE('',#2338,#2339);-#2338 = CARTESIAN_POINT('',(0.,-0.15));-#2339 = VECTOR('',#2340,1.);-#2340 = DIRECTION('',(1.,0.));-#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2342 = ORIENTED_EDGE('',*,*,#2343,.T.);-#2343 = EDGE_CURVE('',#2316,#2344,#2346,.T.);-#2344 = VERTEX_POINT('',#2345);-#2345 = CARTESIAN_POINT('',(-2.2,1.475,0.445));-#2346 = SURFACE_CURVE('',#2347,(#2351,#2358),.PCURVE_S1.);-#2347 = LINE('',#2348,#2349);-#2348 = CARTESIAN_POINT('',(-2.4875,1.475,0.));-#2349 = VECTOR('',#2350,1.);-#2350 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2351 = PCURVE('',#2041,#2352);-#2352 = DEFINITIONAL_REPRESENTATION('',(#2353),#2357);-#2353 = LINE('',#2354,#2355);-#2354 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#2355 = VECTOR('',#2356,1.);-#2356 = DIRECTION('',(-0.839949759337,0.542664170358));-#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2358 = PCURVE('',#2359,#2364);-#2359 = PLANE('',#2360);-#2360 = AXIS2_PLACEMENT_3D('',#2361,#2362,#2363);-#2361 = CARTESIAN_POINT('',(-2.4875,1.625,0.));-#2362 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#2363 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2364 = DEFINITIONAL_REPRESENTATION('',(#2365),#2369);-#2365 = LINE('',#2366,#2367);-#2366 = CARTESIAN_POINT('',(0.,-0.15));-#2367 = VECTOR('',#2368,1.);-#2368 = DIRECTION('',(1.,0.));-#2369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2370 = ORIENTED_EDGE('',*,*,#2371,.T.);-#2371 = EDGE_CURVE('',#2344,#2111,#2372,.T.);+#2328 = DIRECTION('',(1.,0.,0.));+#2329 = PCURVE('',#2262,#2330);+#2330 = DEFINITIONAL_REPRESENTATION('',(#2331),#2335);+#2331 = LINE('',#2332,#2333);+#2332 = CARTESIAN_POINT('',(0.,-0.15));+#2333 = VECTOR('',#2334,1.);+#2334 = DIRECTION('',(1.,0.));+#2335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2336 = PCURVE('',#2041,#2337);+#2337 = DEFINITIONAL_REPRESENTATION('',(#2338),#2342);+#2338 = LINE('',#2339,#2340);+#2339 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2340 = VECTOR('',#2341,1.);+#2341 = DIRECTION('',(0.,1.));+#2342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2343 = ORIENTED_EDGE('',*,*,#2344,.T.);+#2344 = EDGE_CURVE('',#2322,#2247,#2345,.T.);+#2345 = SURFACE_CURVE('',#2346,(#2350,#2357),.PCURVE_S1.);+#2346 = LINE('',#2347,#2348);+#2347 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2348 = VECTOR('',#2349,1.);+#2349 = DIRECTION('',(0.,1.,0.));+#2350 = PCURVE('',#2262,#2351);+#2351 = DEFINITIONAL_REPRESENTATION('',(#2352),#2356);+#2352 = LINE('',#2353,#2354);+#2353 = CARTESIAN_POINT('',(5.E-02,-0.15));+#2354 = VECTOR('',#2355,1.);+#2355 = DIRECTION('',(0.,1.));+#2356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2357 = PCURVE('',#2013,#2358);+#2358 = DEFINITIONAL_REPRESENTATION('',(#2359),#2363);+#2359 = LINE('',#2360,#2361);+#2360 = CARTESIAN_POINT('',(0.,-0.15));+#2361 = VECTOR('',#2362,1.);+#2362 = DIRECTION('',(0.,1.));+#2363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2364 = ORIENTED_EDGE('',*,*,#2246,.F.);+#2365 = ADVANCED_FACE('',(#2366),#2234,.F.);+#2366 = FACE_BOUND('',#2367,.F.);+#2367 = EDGE_LOOP('',(#2368,#2391,#2392,#2393));+#2368 = ORIENTED_EDGE('',*,*,#2369,.T.);+#2369 = EDGE_CURVE('',#2370,#2299,#2372,.T.);+#2370 = VERTEX_POINT('',#2371);+#2371 = CARTESIAN_POINT('',(-2.4875,1.475,0.)); #2372 = SURFACE_CURVE('',#2373,(#2377,#2384),.PCURVE_S1.); #2373 = LINE('',#2374,#2375);-#2374 = CARTESIAN_POINT('',(-2.2,1.475,0.445));+#2374 = CARTESIAN_POINT('',(-2.4875,1.475,0.)); #2375 = VECTOR('',#2376,1.);-#2376 = DIRECTION('',(1.,0.,0.));-#2377 = PCURVE('',#2041,#2378);+#2376 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2377 = PCURVE('',#2234,#2378); #2378 = DEFINITIONAL_REPRESENTATION('',(#2379),#2383); #2379 = LINE('',#2380,#2381);-#2380 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2380 = CARTESIAN_POINT('',(0.,-0.15)); #2381 = VECTOR('',#2382,1.);-#2382 = DIRECTION('',(0.,1.));+#2382 = DIRECTION('',(1.,0.)); #2383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2384 = PCURVE('',#2128,#2385);+#2384 = PCURVE('',#2041,#2385); #2385 = DEFINITIONAL_REPRESENTATION('',(#2386),#2390); #2386 = LINE('',#2387,#2388);-#2387 = CARTESIAN_POINT('',(0.,-0.15));+#2387 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #2388 = VECTOR('',#2389,1.);-#2389 = DIRECTION('',(1.,0.));+#2389 = DIRECTION('',(-0.839949759337,0.542664170358)); #2390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2391 = ORIENTED_EDGE('',*,*,#2140,.T.);-#2392 = ADVANCED_FACE('',(#2393),#2128,.F.);-#2393 = FACE_BOUND('',#2394,.F.);-#2394 = EDGE_LOOP('',(#2395,#2418,#2419,#2420));-#2395 = ORIENTED_EDGE('',*,*,#2396,.F.);-#2396 = EDGE_CURVE('',#2344,#2397,#2399,.T.);-#2397 = VERTEX_POINT('',#2398);-#2398 = CARTESIAN_POINT('',(-2.2,1.775,0.445));-#2399 = SURFACE_CURVE('',#2400,(#2404,#2411),.PCURVE_S1.);-#2400 = LINE('',#2401,#2402);-#2401 = CARTESIAN_POINT('',(-2.2,1.475,0.445));-#2402 = VECTOR('',#2403,1.);-#2403 = DIRECTION('',(0.,1.,0.));-#2404 = PCURVE('',#2128,#2405);-#2405 = DEFINITIONAL_REPRESENTATION('',(#2406),#2410);-#2406 = LINE('',#2407,#2408);-#2407 = CARTESIAN_POINT('',(0.,-0.15));-#2408 = VECTOR('',#2409,1.);-#2409 = DIRECTION('',(0.,1.));-#2410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2411 = PCURVE('',#2359,#2412);-#2412 = DEFINITIONAL_REPRESENTATION('',(#2413),#2417);-#2413 = LINE('',#2414,#2415);-#2414 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#2415 = VECTOR('',#2416,1.);-#2416 = DIRECTION('',(0.,1.));-#2417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2418 = ORIENTED_EDGE('',*,*,#2371,.T.);-#2419 = ORIENTED_EDGE('',*,*,#2110,.T.);-#2420 = ORIENTED_EDGE('',*,*,#2421,.F.);-#2421 = EDGE_CURVE('',#2397,#2113,#2422,.T.);-#2422 = SURFACE_CURVE('',#2423,(#2427,#2434),.PCURVE_S1.);-#2423 = LINE('',#2424,#2425);-#2424 = CARTESIAN_POINT('',(-2.2,1.775,0.445));-#2425 = VECTOR('',#2426,1.);-#2426 = DIRECTION('',(1.,0.,0.));-#2427 = PCURVE('',#2128,#2428);-#2428 = DEFINITIONAL_REPRESENTATION('',(#2429),#2433);-#2429 = LINE('',#2430,#2431);-#2430 = CARTESIAN_POINT('',(0.,0.15));-#2431 = VECTOR('',#2432,1.);-#2432 = DIRECTION('',(1.,0.));-#2433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2434 = PCURVE('',#2095,#2435);-#2435 = DEFINITIONAL_REPRESENTATION('',(#2436),#2440);-#2436 = LINE('',#2437,#2438);-#2437 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#2438 = VECTOR('',#2439,1.);-#2439 = DIRECTION('',(0.,1.));-#2440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2441 = ADVANCED_FACE('',(#2442),#2225,.F.);-#2442 = FACE_BOUND('',#2443,.F.);-#2443 = EDGE_LOOP('',(#2444,#2445,#2468,#2489));-#2444 = ORIENTED_EDGE('',*,*,#2264,.T.);-#2445 = ORIENTED_EDGE('',*,*,#2446,.F.);-#2446 = EDGE_CURVE('',#2447,#2265,#2449,.T.);-#2447 = VERTEX_POINT('',#2448);-#2448 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#2449 = SURFACE_CURVE('',#2450,(#2454,#2461),.PCURVE_S1.);-#2450 = LINE('',#2451,#2452);-#2451 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#2452 = VECTOR('',#2453,1.);-#2453 = DIRECTION('',(0.,-1.,0.));-#2454 = PCURVE('',#2225,#2455);-#2455 = DEFINITIONAL_REPRESENTATION('',(#2456),#2460);-#2456 = LINE('',#2457,#2458);-#2457 = CARTESIAN_POINT('',(0.5675,0.15));-#2458 = VECTOR('',#2459,1.);-#2459 = DIRECTION('',(0.,-1.));-#2460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2461 = PCURVE('',#2303,#2462);-#2462 = DEFINITIONAL_REPRESENTATION('',(#2463),#2467);-#2463 = LINE('',#2464,#2465);-#2464 = CARTESIAN_POINT('',(0.,0.15));-#2465 = VECTOR('',#2466,1.);-#2466 = DIRECTION('',(0.,-1.));-#2467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2468 = ORIENTED_EDGE('',*,*,#2469,.F.);-#2469 = EDGE_CURVE('',#2210,#2447,#2470,.T.);+#2391 = ORIENTED_EDGE('',*,*,#2298,.T.);+#2392 = ORIENTED_EDGE('',*,*,#2218,.F.);+#2393 = ORIENTED_EDGE('',*,*,#2394,.T.);+#2394 = EDGE_CURVE('',#2191,#2370,#2395,.T.);+#2395 = SURFACE_CURVE('',#2396,(#2400,#2407),.PCURVE_S1.);+#2396 = LINE('',#2397,#2398);+#2397 = CARTESIAN_POINT('',(-2.4875,1.775,0.));+#2398 = VECTOR('',#2399,1.);+#2399 = DIRECTION('',(0.,-1.,0.));+#2400 = PCURVE('',#2234,#2401);+#2401 = DEFINITIONAL_REPRESENTATION('',(#2402),#2406);+#2402 = LINE('',#2403,#2404);+#2403 = CARTESIAN_POINT('',(0.,0.15));+#2404 = VECTOR('',#2405,1.);+#2405 = DIRECTION('',(0.,-1.));+#2406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2407 = PCURVE('',#2206,#2408);+#2408 = DEFINITIONAL_REPRESENTATION('',(#2409),#2413);+#2409 = LINE('',#2410,#2411);+#2410 = CARTESIAN_POINT('',(0.7175,0.15));+#2411 = VECTOR('',#2412,1.);+#2412 = DIRECTION('',(0.,-1.));+#2413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2414 = ADVANCED_FACE('',(#2415),#2206,.F.);+#2415 = FACE_BOUND('',#2416,.F.);+#2416 = EDGE_LOOP('',(#2417,#2440,#2441,#2442));+#2417 = ORIENTED_EDGE('',*,*,#2418,.T.);+#2418 = EDGE_CURVE('',#2419,#2370,#2421,.T.);+#2419 = VERTEX_POINT('',#2420);+#2420 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#2421 = SURFACE_CURVE('',#2422,(#2426,#2433),.PCURVE_S1.);+#2422 = LINE('',#2423,#2424);+#2423 = CARTESIAN_POINT('',(-3.205,1.475,0.));+#2424 = VECTOR('',#2425,1.);+#2425 = DIRECTION('',(1.,0.,0.));+#2426 = PCURVE('',#2206,#2427);+#2427 = DEFINITIONAL_REPRESENTATION('',(#2428),#2432);+#2428 = LINE('',#2429,#2430);+#2429 = CARTESIAN_POINT('',(0.,-0.15));+#2430 = VECTOR('',#2431,1.);+#2431 = DIRECTION('',(1.,0.));+#2432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2433 = PCURVE('',#2041,#2434);+#2434 = DEFINITIONAL_REPRESENTATION('',(#2435),#2439);+#2435 = LINE('',#2436,#2437);+#2436 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2437 = VECTOR('',#2438,1.);+#2438 = DIRECTION('',(0.,1.));+#2439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2440 = ORIENTED_EDGE('',*,*,#2394,.F.);+#2441 = ORIENTED_EDGE('',*,*,#2190,.F.);+#2442 = ORIENTED_EDGE('',*,*,#2443,.T.);+#2443 = EDGE_CURVE('',#2163,#2419,#2444,.T.);+#2444 = SURFACE_CURVE('',#2445,(#2449,#2456),.PCURVE_S1.);+#2445 = LINE('',#2446,#2447);+#2446 = CARTESIAN_POINT('',(-3.205,1.775,0.));+#2447 = VECTOR('',#2448,1.);+#2448 = DIRECTION('',(0.,-1.,0.));+#2449 = PCURVE('',#2206,#2450);+#2450 = DEFINITIONAL_REPRESENTATION('',(#2451),#2455);+#2451 = LINE('',#2452,#2453);+#2452 = CARTESIAN_POINT('',(0.,0.15));+#2453 = VECTOR('',#2454,1.);+#2454 = DIRECTION('',(0.,-1.));+#2455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2456 = PCURVE('',#2178,#2457);+#2457 = DEFINITIONAL_REPRESENTATION('',(#2458),#2462);+#2458 = LINE('',#2459,#2460);+#2459 = CARTESIAN_POINT('',(0.15,0.15));+#2460 = VECTOR('',#2461,1.);+#2461 = DIRECTION('',(0.,-1.));+#2462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2463 = ADVANCED_FACE('',(#2464),#2178,.F.);+#2464 = FACE_BOUND('',#2465,.F.);+#2465 = EDGE_LOOP('',(#2466,#2489,#2490,#2491));+#2466 = ORIENTED_EDGE('',*,*,#2467,.T.);+#2467 = EDGE_CURVE('',#2468,#2419,#2470,.T.);+#2468 = VERTEX_POINT('',#2469);+#2469 = CARTESIAN_POINT('',(-3.205,1.475,0.15)); #2470 = SURFACE_CURVE('',#2471,(#2475,#2482),.PCURVE_S1.); #2471 = LINE('',#2472,#2473);-#2472 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2472 = CARTESIAN_POINT('',(-3.205,1.475,0.15)); #2473 = VECTOR('',#2474,1.);-#2474 = DIRECTION('',(-1.,0.,0.));-#2475 = PCURVE('',#2225,#2476);+#2474 = DIRECTION('',(0.,0.,-1.));+#2475 = PCURVE('',#2178,#2476); #2476 = DEFINITIONAL_REPRESENTATION('',(#2477),#2481); #2477 = LINE('',#2478,#2479);-#2478 = CARTESIAN_POINT('',(0.,0.15));+#2478 = CARTESIAN_POINT('',(0.,-0.15)); #2479 = VECTOR('',#2480,1.); #2480 = DIRECTION('',(1.,0.)); #2481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2482 = PCURVE('',#2095,#2483);+#2482 = PCURVE('',#2041,#2483); #2483 = DEFINITIONAL_REPRESENTATION('',(#2484),#2488); #2484 = LINE('',#2485,#2486);-#2485 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#2485 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #2486 = VECTOR('',#2487,1.);-#2487 = DIRECTION('',(0.,-1.));+#2487 = DIRECTION('',(1.,0.)); #2488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2489 = ORIENTED_EDGE('',*,*,#2209,.T.);-#2490 = ADVANCED_FACE('',(#2491),#2095,.F.);-#2491 = FACE_BOUND('',#2492,.F.);-#2492 = EDGE_LOOP('',(#2493,#2494,#2495,#2496,#2519,#2542,#2563,#2564));-#2493 = ORIENTED_EDGE('',*,*,#2081,.T.);-#2494 = ORIENTED_EDGE('',*,*,#2237,.T.);-#2495 = ORIENTED_EDGE('',*,*,#2469,.T.);-#2496 = ORIENTED_EDGE('',*,*,#2497,.T.);-#2497 = EDGE_CURVE('',#2447,#2498,#2500,.T.);-#2498 = VERTEX_POINT('',#2499);-#2499 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#2500 = SURFACE_CURVE('',#2501,(#2505,#2512),.PCURVE_S1.);-#2501 = LINE('',#2502,#2503);-#2502 = CARTESIAN_POINT('',(-3.205,1.775,0.15));-#2503 = VECTOR('',#2504,1.);-#2504 = DIRECTION('',(0.,0.,-1.));-#2505 = PCURVE('',#2095,#2506);+#2489 = ORIENTED_EDGE('',*,*,#2443,.F.);+#2490 = ORIENTED_EDGE('',*,*,#2162,.F.);+#2491 = ORIENTED_EDGE('',*,*,#2492,.T.);+#2492 = EDGE_CURVE('',#2135,#2468,#2493,.T.);+#2493 = SURFACE_CURVE('',#2494,(#2498,#2505),.PCURVE_S1.);+#2494 = LINE('',#2495,#2496);+#2495 = CARTESIAN_POINT('',(-3.205,1.775,0.15));+#2496 = VECTOR('',#2497,1.);+#2497 = DIRECTION('',(0.,-1.,0.));+#2498 = PCURVE('',#2178,#2499);+#2499 = DEFINITIONAL_REPRESENTATION('',(#2500),#2504);+#2500 = LINE('',#2501,#2502);+#2501 = CARTESIAN_POINT('',(0.,0.15));+#2502 = VECTOR('',#2503,1.);+#2503 = DIRECTION('',(0.,-1.));+#2504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2505 = PCURVE('',#2150,#2506); #2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511); #2507 = LINE('',#2508,#2509);-#2508 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2508 = CARTESIAN_POINT('',(0.5675,0.15)); #2509 = VECTOR('',#2510,1.);-#2510 = DIRECTION('',(1.,0.));+#2510 = DIRECTION('',(0.,-1.)); #2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2512 = PCURVE('',#2303,#2513);-#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2518);-#2514 = LINE('',#2515,#2516);-#2515 = CARTESIAN_POINT('',(0.,0.15));-#2516 = VECTOR('',#2517,1.);-#2517 = DIRECTION('',(1.,0.));-#2518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2519 = ORIENTED_EDGE('',*,*,#2520,.T.);-#2520 = EDGE_CURVE('',#2498,#2521,#2523,.T.);-#2521 = VERTEX_POINT('',#2522);-#2522 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#2523 = SURFACE_CURVE('',#2524,(#2528,#2535),.PCURVE_S1.);-#2524 = LINE('',#2525,#2526);-#2525 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#2526 = VECTOR('',#2527,1.);-#2527 = DIRECTION('',(1.,0.,0.));-#2528 = PCURVE('',#2095,#2529);-#2529 = DEFINITIONAL_REPRESENTATION('',(#2530),#2534);-#2530 = LINE('',#2531,#2532);-#2531 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#2532 = VECTOR('',#2533,1.);-#2533 = DIRECTION('',(0.,1.));-#2534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2535 = PCURVE('',#2331,#2536);-#2536 = DEFINITIONAL_REPRESENTATION('',(#2537),#2541);-#2537 = LINE('',#2538,#2539);-#2538 = CARTESIAN_POINT('',(0.,0.15));-#2539 = VECTOR('',#2540,1.);-#2540 = DIRECTION('',(1.,0.));-#2541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2542 = ORIENTED_EDGE('',*,*,#2543,.T.);-#2543 = EDGE_CURVE('',#2521,#2397,#2544,.T.);-#2544 = SURFACE_CURVE('',#2545,(#2549,#2556),.PCURVE_S1.);-#2545 = LINE('',#2546,#2547);-#2546 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#2547 = VECTOR('',#2548,1.);-#2548 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2549 = PCURVE('',#2095,#2550);-#2550 = DEFINITIONAL_REPRESENTATION('',(#2551),#2555);-#2551 = LINE('',#2552,#2553);-#2552 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#2553 = VECTOR('',#2554,1.);-#2554 = DIRECTION('',(-0.839949759337,0.542664170358));-#2555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2556 = PCURVE('',#2359,#2557);-#2557 = DEFINITIONAL_REPRESENTATION('',(#2558),#2562);-#2558 = LINE('',#2559,#2560);-#2559 = CARTESIAN_POINT('',(0.,0.15));-#2560 = VECTOR('',#2561,1.);-#2561 = DIRECTION('',(1.,0.));-#2562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2563 = ORIENTED_EDGE('',*,*,#2421,.T.);-#2564 = ORIENTED_EDGE('',*,*,#2162,.T.);-#2565 = ADVANCED_FACE('',(#2566),#2303,.F.);-#2566 = FACE_BOUND('',#2567,.F.);-#2567 = EDGE_LOOP('',(#2568,#2569,#2590,#2591));-#2568 = ORIENTED_EDGE('',*,*,#2287,.T.);-#2569 = ORIENTED_EDGE('',*,*,#2570,.F.);-#2570 = EDGE_CURVE('',#2498,#2288,#2571,.T.);-#2571 = SURFACE_CURVE('',#2572,(#2576,#2583),.PCURVE_S1.);-#2572 = LINE('',#2573,#2574);-#2573 = CARTESIAN_POINT('',(-3.205,1.775,0.));-#2574 = VECTOR('',#2575,1.);-#2575 = DIRECTION('',(0.,-1.,0.));-#2576 = PCURVE('',#2303,#2577);-#2577 = DEFINITIONAL_REPRESENTATION('',(#2578),#2582);-#2578 = LINE('',#2579,#2580);-#2579 = CARTESIAN_POINT('',(0.15,0.15));-#2580 = VECTOR('',#2581,1.);-#2581 = DIRECTION('',(0.,-1.));-#2582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2583 = PCURVE('',#2331,#2584);-#2584 = DEFINITIONAL_REPRESENTATION('',(#2585),#2589);-#2585 = LINE('',#2586,#2587);-#2586 = CARTESIAN_POINT('',(0.,0.15));-#2587 = VECTOR('',#2588,1.);-#2588 = DIRECTION('',(0.,-1.));-#2589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2590 = ORIENTED_EDGE('',*,*,#2497,.F.);-#2591 = ORIENTED_EDGE('',*,*,#2446,.T.);-#2592 = ADVANCED_FACE('',(#2593),#2331,.F.);-#2593 = FACE_BOUND('',#2594,.F.);-#2594 = EDGE_LOOP('',(#2595,#2596,#2617,#2618));-#2595 = ORIENTED_EDGE('',*,*,#2315,.T.);-#2596 = ORIENTED_EDGE('',*,*,#2597,.F.);-#2597 = EDGE_CURVE('',#2521,#2316,#2598,.T.);-#2598 = SURFACE_CURVE('',#2599,(#2603,#2610),.PCURVE_S1.);-#2599 = LINE('',#2600,#2601);-#2600 = CARTESIAN_POINT('',(-2.4875,1.775,0.));-#2601 = VECTOR('',#2602,1.);-#2602 = DIRECTION('',(0.,-1.,0.));-#2603 = PCURVE('',#2331,#2604);-#2604 = DEFINITIONAL_REPRESENTATION('',(#2605),#2609);-#2605 = LINE('',#2606,#2607);-#2606 = CARTESIAN_POINT('',(0.7175,0.15));-#2607 = VECTOR('',#2608,1.);-#2608 = DIRECTION('',(0.,-1.));-#2609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2610 = PCURVE('',#2359,#2611);-#2611 = DEFINITIONAL_REPRESENTATION('',(#2612),#2616);-#2612 = LINE('',#2613,#2614);-#2613 = CARTESIAN_POINT('',(0.,0.15));-#2614 = VECTOR('',#2615,1.);-#2615 = DIRECTION('',(0.,-1.));-#2616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2617 = ORIENTED_EDGE('',*,*,#2520,.F.);-#2618 = ORIENTED_EDGE('',*,*,#2570,.T.);-#2619 = ADVANCED_FACE('',(#2620),#2359,.F.);+#2512 = ADVANCED_FACE('',(#2513),#2150,.F.);+#2513 = FACE_BOUND('',#2514,.F.);+#2514 = EDGE_LOOP('',(#2515,#2538,#2539,#2540));+#2515 = ORIENTED_EDGE('',*,*,#2516,.T.);+#2516 = EDGE_CURVE('',#2517,#2468,#2519,.T.);+#2517 = VERTEX_POINT('',#2518);+#2518 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#2519 = SURFACE_CURVE('',#2520,(#2524,#2531),.PCURVE_S1.);+#2520 = LINE('',#2521,#2522);+#2521 = CARTESIAN_POINT('',(-2.6375,1.475,0.15));+#2522 = VECTOR('',#2523,1.);+#2523 = DIRECTION('',(-1.,0.,0.));+#2524 = PCURVE('',#2150,#2525);+#2525 = DEFINITIONAL_REPRESENTATION('',(#2526),#2530);+#2526 = LINE('',#2527,#2528);+#2527 = CARTESIAN_POINT('',(0.,-0.15));+#2528 = VECTOR('',#2529,1.);+#2529 = DIRECTION('',(1.,0.));+#2530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2531 = PCURVE('',#2041,#2532);+#2532 = DEFINITIONAL_REPRESENTATION('',(#2533),#2537);+#2533 = LINE('',#2534,#2535);+#2534 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#2535 = VECTOR('',#2536,1.);+#2536 = DIRECTION('',(0.,-1.));+#2537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2538 = ORIENTED_EDGE('',*,*,#2492,.F.);+#2539 = ORIENTED_EDGE('',*,*,#2134,.F.);+#2540 = ORIENTED_EDGE('',*,*,#2541,.T.);+#2541 = EDGE_CURVE('',#2112,#2517,#2542,.T.);+#2542 = SURFACE_CURVE('',#2543,(#2547,#2554),.PCURVE_S1.);+#2543 = LINE('',#2544,#2545);+#2544 = CARTESIAN_POINT('',(-2.6375,1.775,0.15));+#2545 = VECTOR('',#2546,1.);+#2546 = DIRECTION('',(0.,-1.,0.));+#2547 = PCURVE('',#2150,#2548);+#2548 = DEFINITIONAL_REPRESENTATION('',(#2549),#2553);+#2549 = LINE('',#2550,#2551);+#2550 = CARTESIAN_POINT('',(0.,0.15));+#2551 = VECTOR('',#2552,1.);+#2552 = DIRECTION('',(0.,-1.));+#2553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2554 = PCURVE('',#2069,#2555);+#2555 = DEFINITIONAL_REPRESENTATION('',(#2556),#2560);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(0.529793591883,0.15));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(-0.,-1.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = ADVANCED_FACE('',(#2562),#2069,.F.);+#2562 = FACE_BOUND('',#2563,.F.);+#2563 = EDGE_LOOP('',(#2564,#2585,#2586,#2587));+#2564 = ORIENTED_EDGE('',*,*,#2565,.T.);+#2565 = EDGE_CURVE('',#2026,#2517,#2566,.T.);+#2566 = SURFACE_CURVE('',#2567,(#2571,#2578),.PCURVE_S1.);+#2567 = LINE('',#2568,#2569);+#2568 = CARTESIAN_POINT('',(-2.35,1.475,0.595));+#2569 = VECTOR('',#2570,1.);+#2570 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2571 = PCURVE('',#2069,#2572);+#2572 = DEFINITIONAL_REPRESENTATION('',(#2573),#2577);+#2573 = LINE('',#2574,#2575);+#2574 = CARTESIAN_POINT('',(-0.,-0.15));+#2575 = VECTOR('',#2576,1.);+#2576 = DIRECTION('',(1.,0.));+#2577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2578 = PCURVE('',#2041,#2579);+#2579 = DEFINITIONAL_REPRESENTATION('',(#2580),#2584);+#2580 = LINE('',#2581,#2582);+#2581 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2582 = VECTOR('',#2583,1.);+#2583 = DIRECTION('',(0.839949759337,-0.542664170358));+#2584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2585 = ORIENTED_EDGE('',*,*,#2541,.F.);+#2586 = ORIENTED_EDGE('',*,*,#2111,.F.);+#2587 = ORIENTED_EDGE('',*,*,#2053,.T.);+#2588 = ADVANCED_FACE('',(#2589),#2041,.T.);+#2589 = FACE_BOUND('',#2590,.T.);+#2590 = EDGE_LOOP('',(#2591,#2592,#2593,#2594,#2595,#2596,#2597,#2598));+#2591 = ORIENTED_EDGE('',*,*,#2025,.T.);+#2592 = ORIENTED_EDGE('',*,*,#2565,.T.);+#2593 = ORIENTED_EDGE('',*,*,#2516,.T.);+#2594 = ORIENTED_EDGE('',*,*,#2467,.T.);+#2595 = ORIENTED_EDGE('',*,*,#2418,.T.);+#2596 = ORIENTED_EDGE('',*,*,#2369,.T.);+#2597 = ORIENTED_EDGE('',*,*,#2321,.T.);+#2598 = ORIENTED_EDGE('',*,*,#2599,.T.);+#2599 = EDGE_CURVE('',#2322,#1991,#2600,.T.);+#2600 = SURFACE_CURVE('',#2601,(#2605,#2612),.PCURVE_S1.);+#2601 = LINE('',#2602,#2603);+#2602 = CARTESIAN_POINT('',(-2.15,1.475,0.445));+#2603 = VECTOR('',#2604,1.);+#2604 = DIRECTION('',(0.,0.,1.));+#2605 = PCURVE('',#2041,#2606);+#2606 = DEFINITIONAL_REPRESENTATION('',(#2607),#2611);+#2607 = LINE('',#2608,#2609);+#2608 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2609 = VECTOR('',#2610,1.);+#2610 = DIRECTION('',(-1.,0.));+#2611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2612 = PCURVE('',#2013,#2613);+#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);+#2614 = LINE('',#2615,#2616);+#2615 = CARTESIAN_POINT('',(0.,-0.15));+#2616 = VECTOR('',#2617,1.);+#2617 = DIRECTION('',(1.,0.));+#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2619 = ADVANCED_FACE('',(#2620),#2013,.F.); #2620 = FACE_BOUND('',#2621,.F.); #2621 = EDGE_LOOP('',(#2622,#2623,#2624,#2625));-#2622 = ORIENTED_EDGE('',*,*,#2343,.T.);-#2623 = ORIENTED_EDGE('',*,*,#2396,.T.);-#2624 = ORIENTED_EDGE('',*,*,#2543,.F.);-#2625 = ORIENTED_EDGE('',*,*,#2597,.T.);+#2622 = ORIENTED_EDGE('',*,*,#2344,.F.);+#2623 = ORIENTED_EDGE('',*,*,#2599,.T.);+#2624 = ORIENTED_EDGE('',*,*,#1990,.T.);+#2625 = ORIENTED_EDGE('',*,*,#2274,.F.); #2626 = MANIFOLD_SOLID_BREP('',#2627);-#2627 = CLOSED_SHELL('',(#2628,#2748,#2824,#2900,#3034,#3083,#3132,#3207- ,#3234,#3261));+#2627 = CLOSED_SHELL('',(#2628,#2748,#2936,#3007,#3056,#3105,#3154,#3203+ ,#3230,#3261)); #2628 = ADVANCED_FACE('',(#2629),#2643,.F.); #2629 = FACE_BOUND('',#2630,.F.); #2630 = EDGE_LOOP('',(#2631,#2666,#2694,#2722));@@ -3178,609 +3178,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2748 = ADVANCED_FACE('',(#2749),#2655,.F.);+#2748 = ADVANCED_FACE('',(#2749),#2737,.F.); #2749 = FACE_BOUND('',#2750,.F.);-#2750 = EDGE_LOOP('',(#2751,#2781,#2802,#2803));-#2751 = ORIENTED_EDGE('',*,*,#2752,.F.);-#2752 = EDGE_CURVE('',#2753,#2755,#2757,.T.);-#2753 = VERTEX_POINT('',#2754);-#2754 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#2755 = VERTEX_POINT('',#2756);-#2756 = CARTESIAN_POINT('',(-2.15,1.125,0.445));-#2757 = SURFACE_CURVE('',#2758,(#2762,#2769),.PCURVE_S1.);-#2758 = LINE('',#2759,#2760);-#2759 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#2760 = VECTOR('',#2761,1.);-#2761 = DIRECTION('',(0.,1.,0.));-#2762 = PCURVE('',#2655,#2763);-#2763 = DEFINITIONAL_REPRESENTATION('',(#2764),#2768);-#2764 = LINE('',#2765,#2766);-#2765 = CARTESIAN_POINT('',(0.,-0.15));-#2766 = VECTOR('',#2767,1.);-#2767 = DIRECTION('',(0.,1.));-#2768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2769 = PCURVE('',#2770,#2775);-#2770 = PLANE('',#2771);-#2771 = AXIS2_PLACEMENT_3D('',#2772,#2773,#2774);-#2772 = CARTESIAN_POINT('',(-2.2,0.975,0.445));-#2773 = DIRECTION('',(-0.,0.,1.));-#2774 = DIRECTION('',(1.,0.,0.));-#2775 = DEFINITIONAL_REPRESENTATION('',(#2776),#2780);-#2776 = LINE('',#2777,#2778);-#2777 = CARTESIAN_POINT('',(5.E-02,-0.15));-#2778 = VECTOR('',#2779,1.);-#2779 = DIRECTION('',(0.,1.));-#2780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2781 = ORIENTED_EDGE('',*,*,#2782,.T.);-#2782 = EDGE_CURVE('',#2753,#2633,#2783,.T.);-#2783 = SURFACE_CURVE('',#2784,(#2788,#2795),.PCURVE_S1.);-#2784 = LINE('',#2785,#2786);-#2785 = CARTESIAN_POINT('',(-2.15,0.825,0.445));-#2786 = VECTOR('',#2787,1.);-#2787 = DIRECTION('',(0.,0.,1.));-#2788 = PCURVE('',#2655,#2789);-#2789 = DEFINITIONAL_REPRESENTATION('',(#2790),#2794);-#2790 = LINE('',#2791,#2792);-#2791 = CARTESIAN_POINT('',(0.,-0.15));-#2792 = VECTOR('',#2793,1.);-#2793 = DIRECTION('',(1.,0.));-#2794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2795 = PCURVE('',#2683,#2796);-#2796 = DEFINITIONAL_REPRESENTATION('',(#2797),#2801);-#2797 = LINE('',#2798,#2799);-#2798 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#2799 = VECTOR('',#2800,1.);-#2800 = DIRECTION('',(-1.,0.));-#2801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2802 = ORIENTED_EDGE('',*,*,#2632,.T.);-#2803 = ORIENTED_EDGE('',*,*,#2804,.F.);-#2804 = EDGE_CURVE('',#2755,#2635,#2805,.T.);-#2805 = SURFACE_CURVE('',#2806,(#2810,#2817),.PCURVE_S1.);-#2806 = LINE('',#2807,#2808);-#2807 = CARTESIAN_POINT('',(-2.15,1.125,0.445));-#2808 = VECTOR('',#2809,1.);-#2809 = DIRECTION('',(0.,0.,1.));-#2810 = PCURVE('',#2655,#2811);-#2811 = DEFINITIONAL_REPRESENTATION('',(#2812),#2816);-#2812 = LINE('',#2813,#2814);-#2813 = CARTESIAN_POINT('',(0.,0.15));-#2814 = VECTOR('',#2815,1.);-#2815 = DIRECTION('',(1.,0.));-#2816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2817 = PCURVE('',#2737,#2818);-#2818 = DEFINITIONAL_REPRESENTATION('',(#2819),#2823);-#2819 = LINE('',#2820,#2821);-#2820 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#2821 = VECTOR('',#2822,1.);-#2822 = DIRECTION('',(-1.,0.));-#2823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2824 = ADVANCED_FACE('',(#2825),#2711,.F.);-#2825 = FACE_BOUND('',#2826,.F.);-#2826 = EDGE_LOOP('',(#2827,#2850,#2878,#2899));-#2827 = ORIENTED_EDGE('',*,*,#2828,.T.);-#2828 = EDGE_CURVE('',#2668,#2829,#2831,.T.);-#2829 = VERTEX_POINT('',#2830);-#2830 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));-#2831 = SURFACE_CURVE('',#2832,(#2836,#2843),.PCURVE_S1.);-#2832 = LINE('',#2833,#2834);-#2833 = CARTESIAN_POINT('',(-2.35,0.825,0.595));-#2834 = VECTOR('',#2835,1.);-#2835 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2836 = PCURVE('',#2711,#2837);-#2837 = DEFINITIONAL_REPRESENTATION('',(#2838),#2842);-#2838 = LINE('',#2839,#2840);-#2839 = CARTESIAN_POINT('',(-0.,-0.15));-#2840 = VECTOR('',#2841,1.);-#2841 = DIRECTION('',(1.,0.));-#2842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2843 = PCURVE('',#2683,#2844);-#2844 = DEFINITIONAL_REPRESENTATION('',(#2845),#2849);-#2845 = LINE('',#2846,#2847);-#2846 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#2847 = VECTOR('',#2848,1.);-#2848 = DIRECTION('',(0.839949759337,-0.542664170358));-#2849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2850 = ORIENTED_EDGE('',*,*,#2851,.F.);-#2851 = EDGE_CURVE('',#2852,#2829,#2854,.T.);-#2852 = VERTEX_POINT('',#2853);-#2853 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));-#2854 = SURFACE_CURVE('',#2855,(#2859,#2866),.PCURVE_S1.);-#2855 = LINE('',#2856,#2857);-#2856 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));-#2857 = VECTOR('',#2858,1.);-#2858 = DIRECTION('',(0.,-1.,0.));-#2859 = PCURVE('',#2711,#2860);-#2860 = DEFINITIONAL_REPRESENTATION('',(#2861),#2865);-#2861 = LINE('',#2862,#2863);-#2862 = CARTESIAN_POINT('',(0.529793591883,0.15));-#2863 = VECTOR('',#2864,1.);-#2864 = DIRECTION('',(-0.,-1.));-#2865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2866 = PCURVE('',#2867,#2872);-#2867 = PLANE('',#2868);-#2868 = AXIS2_PLACEMENT_3D('',#2869,#2870,#2871);-#2869 = CARTESIAN_POINT('',(-2.6375,0.975,0.15));-#2870 = DIRECTION('',(-0.,-0.,-1.));-#2871 = DIRECTION('',(-1.,0.,0.));-#2872 = DEFINITIONAL_REPRESENTATION('',(#2873),#2877);-#2873 = LINE('',#2874,#2875);-#2874 = CARTESIAN_POINT('',(0.,0.15));-#2875 = VECTOR('',#2876,1.);-#2876 = DIRECTION('',(0.,-1.));-#2877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2878 = ORIENTED_EDGE('',*,*,#2879,.F.);-#2879 = EDGE_CURVE('',#2696,#2852,#2880,.T.);-#2880 = SURFACE_CURVE('',#2881,(#2885,#2892),.PCURVE_S1.);-#2881 = LINE('',#2882,#2883);-#2882 = CARTESIAN_POINT('',(-2.35,1.125,0.595));-#2883 = VECTOR('',#2884,1.);-#2884 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#2885 = PCURVE('',#2711,#2886);-#2886 = DEFINITIONAL_REPRESENTATION('',(#2887),#2891);-#2887 = LINE('',#2888,#2889);-#2888 = CARTESIAN_POINT('',(0.,0.15));-#2889 = VECTOR('',#2890,1.);-#2890 = DIRECTION('',(1.,0.));-#2891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2892 = PCURVE('',#2737,#2893);-#2893 = DEFINITIONAL_REPRESENTATION('',(#2894),#2898);-#2894 = LINE('',#2895,#2896);-#2895 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#2896 = VECTOR('',#2897,1.);-#2897 = DIRECTION('',(0.839949759337,-0.542664170358));-#2898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2899 = ORIENTED_EDGE('',*,*,#2695,.T.);-#2900 = ADVANCED_FACE('',(#2901),#2683,.T.);-#2901 = FACE_BOUND('',#2902,.T.);-#2902 = EDGE_LOOP('',(#2903,#2904,#2905,#2928,#2956,#2984,#3012,#3033));-#2903 = ORIENTED_EDGE('',*,*,#2667,.T.);-#2904 = ORIENTED_EDGE('',*,*,#2828,.T.);-#2905 = ORIENTED_EDGE('',*,*,#2906,.T.);-#2906 = EDGE_CURVE('',#2829,#2907,#2909,.T.);-#2907 = VERTEX_POINT('',#2908);-#2908 = CARTESIAN_POINT('',(-3.205,0.825,0.15));-#2909 = SURFACE_CURVE('',#2910,(#2914,#2921),.PCURVE_S1.);+#2750 = EDGE_LOOP('',(#2751,#2752,#2775,#2803,#2831,#2859,#2887,#2915));+#2751 = ORIENTED_EDGE('',*,*,#2723,.T.);+#2752 = ORIENTED_EDGE('',*,*,#2753,.T.);+#2753 = EDGE_CURVE('',#2696,#2754,#2756,.T.);+#2754 = VERTEX_POINT('',#2755);+#2755 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#2756 = SURFACE_CURVE('',#2757,(#2761,#2768),.PCURVE_S1.);+#2757 = LINE('',#2758,#2759);+#2758 = CARTESIAN_POINT('',(-2.35,1.125,0.595));+#2759 = VECTOR('',#2760,1.);+#2760 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#2761 = PCURVE('',#2737,#2762);+#2762 = DEFINITIONAL_REPRESENTATION('',(#2763),#2767);+#2763 = LINE('',#2764,#2765);+#2764 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#2765 = VECTOR('',#2766,1.);+#2766 = DIRECTION('',(0.839949759337,-0.542664170358));+#2767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2768 = PCURVE('',#2711,#2769);+#2769 = DEFINITIONAL_REPRESENTATION('',(#2770),#2774);+#2770 = LINE('',#2771,#2772);+#2771 = CARTESIAN_POINT('',(0.,0.15));+#2772 = VECTOR('',#2773,1.);+#2773 = DIRECTION('',(1.,0.));+#2774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2775 = ORIENTED_EDGE('',*,*,#2776,.T.);+#2776 = EDGE_CURVE('',#2754,#2777,#2779,.T.);+#2777 = VERTEX_POINT('',#2778);+#2778 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#2779 = SURFACE_CURVE('',#2780,(#2784,#2791),.PCURVE_S1.);+#2780 = LINE('',#2781,#2782);+#2781 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#2782 = VECTOR('',#2783,1.);+#2783 = DIRECTION('',(-1.,0.,0.));+#2784 = PCURVE('',#2737,#2785);+#2785 = DEFINITIONAL_REPRESENTATION('',(#2786),#2790);+#2786 = LINE('',#2787,#2788);+#2787 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#2788 = VECTOR('',#2789,1.);+#2789 = DIRECTION('',(0.,-1.));+#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2791 = PCURVE('',#2792,#2797);+#2792 = PLANE('',#2793);+#2793 = AXIS2_PLACEMENT_3D('',#2794,#2795,#2796);+#2794 = CARTESIAN_POINT('',(-2.6375,0.975,0.15));+#2795 = DIRECTION('',(-0.,-0.,-1.));+#2796 = DIRECTION('',(-1.,0.,0.));+#2797 = DEFINITIONAL_REPRESENTATION('',(#2798),#2802);+#2798 = LINE('',#2799,#2800);+#2799 = CARTESIAN_POINT('',(0.,0.15));+#2800 = VECTOR('',#2801,1.);+#2801 = DIRECTION('',(1.,0.));+#2802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2803 = ORIENTED_EDGE('',*,*,#2804,.T.);+#2804 = EDGE_CURVE('',#2777,#2805,#2807,.T.);+#2805 = VERTEX_POINT('',#2806);+#2806 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#2807 = SURFACE_CURVE('',#2808,(#2812,#2819),.PCURVE_S1.);+#2808 = LINE('',#2809,#2810);+#2809 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#2810 = VECTOR('',#2811,1.);+#2811 = DIRECTION('',(0.,0.,-1.));+#2812 = PCURVE('',#2737,#2813);+#2813 = DEFINITIONAL_REPRESENTATION('',(#2814),#2818);+#2814 = LINE('',#2815,#2816);+#2815 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#2816 = VECTOR('',#2817,1.);+#2817 = DIRECTION('',(1.,0.));+#2818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2819 = PCURVE('',#2820,#2825);+#2820 = PLANE('',#2821);+#2821 = AXIS2_PLACEMENT_3D('',#2822,#2823,#2824);+#2822 = CARTESIAN_POINT('',(-3.205,0.975,0.15));+#2823 = DIRECTION('',(1.,0.,0.));+#2824 = DIRECTION('',(0.,0.,-1.));+#2825 = DEFINITIONAL_REPRESENTATION('',(#2826),#2830);+#2826 = LINE('',#2827,#2828);+#2827 = CARTESIAN_POINT('',(0.,0.15));+#2828 = VECTOR('',#2829,1.);+#2829 = DIRECTION('',(1.,0.));+#2830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2831 = ORIENTED_EDGE('',*,*,#2832,.T.);+#2832 = EDGE_CURVE('',#2805,#2833,#2835,.T.);+#2833 = VERTEX_POINT('',#2834);+#2834 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#2835 = SURFACE_CURVE('',#2836,(#2840,#2847),.PCURVE_S1.);+#2836 = LINE('',#2837,#2838);+#2837 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#2838 = VECTOR('',#2839,1.);+#2839 = DIRECTION('',(1.,0.,0.));+#2840 = PCURVE('',#2737,#2841);+#2841 = DEFINITIONAL_REPRESENTATION('',(#2842),#2846);+#2842 = LINE('',#2843,#2844);+#2843 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2844 = VECTOR('',#2845,1.);+#2845 = DIRECTION('',(0.,1.));+#2846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2847 = PCURVE('',#2848,#2853);+#2848 = PLANE('',#2849);+#2849 = AXIS2_PLACEMENT_3D('',#2850,#2851,#2852);+#2850 = CARTESIAN_POINT('',(-3.205,0.975,0.));+#2851 = DIRECTION('',(-0.,0.,1.));+#2852 = DIRECTION('',(1.,0.,0.));+#2853 = DEFINITIONAL_REPRESENTATION('',(#2854),#2858);+#2854 = LINE('',#2855,#2856);+#2855 = CARTESIAN_POINT('',(0.,0.15));+#2856 = VECTOR('',#2857,1.);+#2857 = DIRECTION('',(1.,0.));+#2858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2859 = ORIENTED_EDGE('',*,*,#2860,.T.);+#2860 = EDGE_CURVE('',#2833,#2861,#2863,.T.);+#2861 = VERTEX_POINT('',#2862);+#2862 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#2863 = SURFACE_CURVE('',#2864,(#2868,#2875),.PCURVE_S1.);+#2864 = LINE('',#2865,#2866);+#2865 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#2866 = VECTOR('',#2867,1.);+#2867 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2868 = PCURVE('',#2737,#2869);+#2869 = DEFINITIONAL_REPRESENTATION('',(#2870),#2874);+#2870 = LINE('',#2871,#2872);+#2871 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#2872 = VECTOR('',#2873,1.);+#2873 = DIRECTION('',(-0.839949759337,0.542664170358));+#2874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2875 = PCURVE('',#2876,#2881);+#2876 = PLANE('',#2877);+#2877 = AXIS2_PLACEMENT_3D('',#2878,#2879,#2880);+#2878 = CARTESIAN_POINT('',(-2.4875,0.975,0.));+#2879 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#2880 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#2881 = DEFINITIONAL_REPRESENTATION('',(#2882),#2886);+#2882 = LINE('',#2883,#2884);+#2883 = CARTESIAN_POINT('',(0.,0.15));+#2884 = VECTOR('',#2885,1.);+#2885 = DIRECTION('',(1.,0.));+#2886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2887 = ORIENTED_EDGE('',*,*,#2888,.T.);+#2888 = EDGE_CURVE('',#2861,#2889,#2891,.T.);+#2889 = VERTEX_POINT('',#2890);+#2890 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#2891 = SURFACE_CURVE('',#2892,(#2896,#2903),.PCURVE_S1.);+#2892 = LINE('',#2893,#2894);+#2893 = CARTESIAN_POINT('',(-2.2,1.125,0.445));+#2894 = VECTOR('',#2895,1.);+#2895 = DIRECTION('',(1.,0.,0.));+#2896 = PCURVE('',#2737,#2897);+#2897 = DEFINITIONAL_REPRESENTATION('',(#2898),#2902);+#2898 = LINE('',#2899,#2900);+#2899 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2900 = VECTOR('',#2901,1.);+#2901 = DIRECTION('',(0.,1.));+#2902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2903 = PCURVE('',#2904,#2909);+#2904 = PLANE('',#2905);+#2905 = AXIS2_PLACEMENT_3D('',#2906,#2907,#2908);+#2906 = CARTESIAN_POINT('',(-2.2,0.975,0.445));+#2907 = DIRECTION('',(-0.,0.,1.));+#2908 = DIRECTION('',(1.,0.,0.));+#2909 = DEFINITIONAL_REPRESENTATION('',(#2910),#2914); #2910 = LINE('',#2911,#2912);-#2911 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#2911 = CARTESIAN_POINT('',(0.,0.15)); #2912 = VECTOR('',#2913,1.);-#2913 = DIRECTION('',(-1.,0.,0.));-#2914 = PCURVE('',#2683,#2915);-#2915 = DEFINITIONAL_REPRESENTATION('',(#2916),#2920);-#2916 = LINE('',#2917,#2918);-#2917 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#2918 = VECTOR('',#2919,1.);-#2919 = DIRECTION('',(0.,-1.));-#2920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2921 = PCURVE('',#2867,#2922);-#2922 = DEFINITIONAL_REPRESENTATION('',(#2923),#2927);-#2923 = LINE('',#2924,#2925);-#2924 = CARTESIAN_POINT('',(0.,-0.15));-#2925 = VECTOR('',#2926,1.);-#2926 = DIRECTION('',(1.,0.));-#2927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2928 = ORIENTED_EDGE('',*,*,#2929,.T.);-#2929 = EDGE_CURVE('',#2907,#2930,#2932,.T.);-#2930 = VERTEX_POINT('',#2931);-#2931 = CARTESIAN_POINT('',(-3.205,0.825,0.));-#2932 = SURFACE_CURVE('',#2933,(#2937,#2944),.PCURVE_S1.);-#2933 = LINE('',#2934,#2935);-#2934 = CARTESIAN_POINT('',(-3.205,0.825,0.15));-#2935 = VECTOR('',#2936,1.);-#2936 = DIRECTION('',(0.,0.,-1.));-#2937 = PCURVE('',#2683,#2938);-#2938 = DEFINITIONAL_REPRESENTATION('',(#2939),#2943);-#2939 = LINE('',#2940,#2941);-#2940 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#2941 = VECTOR('',#2942,1.);-#2942 = DIRECTION('',(1.,0.));-#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2944 = PCURVE('',#2945,#2950);-#2945 = PLANE('',#2946);-#2946 = AXIS2_PLACEMENT_3D('',#2947,#2948,#2949);-#2947 = CARTESIAN_POINT('',(-3.205,0.975,0.15));-#2948 = DIRECTION('',(1.,0.,0.));-#2949 = DIRECTION('',(0.,0.,-1.));-#2950 = DEFINITIONAL_REPRESENTATION('',(#2951),#2955);-#2951 = LINE('',#2952,#2953);-#2952 = CARTESIAN_POINT('',(0.,-0.15));-#2953 = VECTOR('',#2954,1.);-#2954 = DIRECTION('',(1.,0.));-#2955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2956 = ORIENTED_EDGE('',*,*,#2957,.T.);-#2957 = EDGE_CURVE('',#2930,#2958,#2960,.T.);-#2958 = VERTEX_POINT('',#2959);-#2959 = CARTESIAN_POINT('',(-2.4875,0.825,0.));-#2960 = SURFACE_CURVE('',#2961,(#2965,#2972),.PCURVE_S1.);-#2961 = LINE('',#2962,#2963);-#2962 = CARTESIAN_POINT('',(-3.205,0.825,0.));-#2963 = VECTOR('',#2964,1.);-#2964 = DIRECTION('',(1.,0.,0.));-#2965 = PCURVE('',#2683,#2966);-#2966 = DEFINITIONAL_REPRESENTATION('',(#2967),#2971);+#2913 = DIRECTION('',(1.,0.));+#2914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2915 = ORIENTED_EDGE('',*,*,#2916,.T.);+#2916 = EDGE_CURVE('',#2889,#2635,#2917,.T.);+#2917 = SURFACE_CURVE('',#2918,(#2922,#2929),.PCURVE_S1.);+#2918 = LINE('',#2919,#2920);+#2919 = CARTESIAN_POINT('',(-2.15,1.125,0.445));+#2920 = VECTOR('',#2921,1.);+#2921 = DIRECTION('',(0.,0.,1.));+#2922 = PCURVE('',#2737,#2923);+#2923 = DEFINITIONAL_REPRESENTATION('',(#2924),#2928);+#2924 = LINE('',#2925,#2926);+#2925 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#2926 = VECTOR('',#2927,1.);+#2927 = DIRECTION('',(-1.,0.));+#2928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2929 = PCURVE('',#2655,#2930);+#2930 = DEFINITIONAL_REPRESENTATION('',(#2931),#2935);+#2931 = LINE('',#2932,#2933);+#2932 = CARTESIAN_POINT('',(0.,0.15));+#2933 = VECTOR('',#2934,1.);+#2934 = DIRECTION('',(1.,0.));+#2935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2936 = ADVANCED_FACE('',(#2937),#2904,.F.);+#2937 = FACE_BOUND('',#2938,.F.);+#2938 = EDGE_LOOP('',(#2939,#2962,#2985,#3006));+#2939 = ORIENTED_EDGE('',*,*,#2940,.F.);+#2940 = EDGE_CURVE('',#2941,#2861,#2943,.T.);+#2941 = VERTEX_POINT('',#2942);+#2942 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#2943 = SURFACE_CURVE('',#2944,(#2948,#2955),.PCURVE_S1.);+#2944 = LINE('',#2945,#2946);+#2945 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#2946 = VECTOR('',#2947,1.);+#2947 = DIRECTION('',(0.,1.,0.));+#2948 = PCURVE('',#2904,#2949);+#2949 = DEFINITIONAL_REPRESENTATION('',(#2950),#2954);+#2950 = LINE('',#2951,#2952);+#2951 = CARTESIAN_POINT('',(0.,-0.15));+#2952 = VECTOR('',#2953,1.);+#2953 = DIRECTION('',(0.,1.));+#2954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2955 = PCURVE('',#2876,#2956);+#2956 = DEFINITIONAL_REPRESENTATION('',(#2957),#2961);+#2957 = LINE('',#2958,#2959);+#2958 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#2959 = VECTOR('',#2960,1.);+#2960 = DIRECTION('',(0.,1.));+#2961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2962 = ORIENTED_EDGE('',*,*,#2963,.T.);+#2963 = EDGE_CURVE('',#2941,#2964,#2966,.T.);+#2964 = VERTEX_POINT('',#2965);+#2965 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#2966 = SURFACE_CURVE('',#2967,(#2971,#2978),.PCURVE_S1.); #2967 = LINE('',#2968,#2969);-#2968 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#2968 = CARTESIAN_POINT('',(-2.2,0.825,0.445)); #2969 = VECTOR('',#2970,1.);-#2970 = DIRECTION('',(0.,1.));-#2971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2972 = PCURVE('',#2973,#2978);-#2973 = PLANE('',#2974);-#2974 = AXIS2_PLACEMENT_3D('',#2975,#2976,#2977);-#2975 = CARTESIAN_POINT('',(-3.205,0.975,0.));-#2976 = DIRECTION('',(-0.,0.,1.));-#2977 = DIRECTION('',(1.,0.,0.));-#2978 = DEFINITIONAL_REPRESENTATION('',(#2979),#2983);-#2979 = LINE('',#2980,#2981);-#2980 = CARTESIAN_POINT('',(0.,-0.15));-#2981 = VECTOR('',#2982,1.);-#2982 = DIRECTION('',(1.,0.));-#2983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2984 = ORIENTED_EDGE('',*,*,#2985,.T.);-#2985 = EDGE_CURVE('',#2958,#2986,#2988,.T.);-#2986 = VERTEX_POINT('',#2987);-#2987 = CARTESIAN_POINT('',(-2.2,0.825,0.445));-#2988 = SURFACE_CURVE('',#2989,(#2993,#3000),.PCURVE_S1.);-#2989 = LINE('',#2990,#2991);-#2990 = CARTESIAN_POINT('',(-2.4875,0.825,0.));-#2991 = VECTOR('',#2992,1.);-#2992 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#2993 = PCURVE('',#2683,#2994);-#2994 = DEFINITIONAL_REPRESENTATION('',(#2995),#2999);-#2995 = LINE('',#2996,#2997);-#2996 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#2997 = VECTOR('',#2998,1.);-#2998 = DIRECTION('',(-0.839949759337,0.542664170358));-#2999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3000 = PCURVE('',#3001,#3006);-#3001 = PLANE('',#3002);-#3002 = AXIS2_PLACEMENT_3D('',#3003,#3004,#3005);-#3003 = CARTESIAN_POINT('',(-2.4875,0.975,0.));-#3004 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#3005 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3006 = DEFINITIONAL_REPRESENTATION('',(#3007),#3011);-#3007 = LINE('',#3008,#3009);-#3008 = CARTESIAN_POINT('',(0.,-0.15));-#3009 = VECTOR('',#3010,1.);-#3010 = DIRECTION('',(1.,0.));-#3011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3012 = ORIENTED_EDGE('',*,*,#3013,.T.);-#3013 = EDGE_CURVE('',#2986,#2753,#3014,.T.);+#2970 = DIRECTION('',(1.,0.,0.));+#2971 = PCURVE('',#2904,#2972);+#2972 = DEFINITIONAL_REPRESENTATION('',(#2973),#2977);+#2973 = LINE('',#2974,#2975);+#2974 = CARTESIAN_POINT('',(0.,-0.15));+#2975 = VECTOR('',#2976,1.);+#2976 = DIRECTION('',(1.,0.));+#2977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2978 = PCURVE('',#2683,#2979);+#2979 = DEFINITIONAL_REPRESENTATION('',(#2980),#2984);+#2980 = LINE('',#2981,#2982);+#2981 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#2982 = VECTOR('',#2983,1.);+#2983 = DIRECTION('',(0.,1.));+#2984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2985 = ORIENTED_EDGE('',*,*,#2986,.T.);+#2986 = EDGE_CURVE('',#2964,#2889,#2987,.T.);+#2987 = SURFACE_CURVE('',#2988,(#2992,#2999),.PCURVE_S1.);+#2988 = LINE('',#2989,#2990);+#2989 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#2990 = VECTOR('',#2991,1.);+#2991 = DIRECTION('',(0.,1.,0.));+#2992 = PCURVE('',#2904,#2993);+#2993 = DEFINITIONAL_REPRESENTATION('',(#2994),#2998);+#2994 = LINE('',#2995,#2996);+#2995 = CARTESIAN_POINT('',(5.E-02,-0.15));+#2996 = VECTOR('',#2997,1.);+#2997 = DIRECTION('',(0.,1.));+#2998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2999 = PCURVE('',#2655,#3000);+#3000 = DEFINITIONAL_REPRESENTATION('',(#3001),#3005);+#3001 = LINE('',#3002,#3003);+#3002 = CARTESIAN_POINT('',(0.,-0.15));+#3003 = VECTOR('',#3004,1.);+#3004 = DIRECTION('',(0.,1.));+#3005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3006 = ORIENTED_EDGE('',*,*,#2888,.F.);+#3007 = ADVANCED_FACE('',(#3008),#2876,.F.);+#3008 = FACE_BOUND('',#3009,.F.);+#3009 = EDGE_LOOP('',(#3010,#3033,#3034,#3035));+#3010 = ORIENTED_EDGE('',*,*,#3011,.T.);+#3011 = EDGE_CURVE('',#3012,#2941,#3014,.T.);+#3012 = VERTEX_POINT('',#3013);+#3013 = CARTESIAN_POINT('',(-2.4875,0.825,0.)); #3014 = SURFACE_CURVE('',#3015,(#3019,#3026),.PCURVE_S1.); #3015 = LINE('',#3016,#3017);-#3016 = CARTESIAN_POINT('',(-2.2,0.825,0.445));+#3016 = CARTESIAN_POINT('',(-2.4875,0.825,0.)); #3017 = VECTOR('',#3018,1.);-#3018 = DIRECTION('',(1.,0.,0.));-#3019 = PCURVE('',#2683,#3020);+#3018 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3019 = PCURVE('',#2876,#3020); #3020 = DEFINITIONAL_REPRESENTATION('',(#3021),#3025); #3021 = LINE('',#3022,#3023);-#3022 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3022 = CARTESIAN_POINT('',(0.,-0.15)); #3023 = VECTOR('',#3024,1.);-#3024 = DIRECTION('',(0.,1.));+#3024 = DIRECTION('',(1.,0.)); #3025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3026 = PCURVE('',#2770,#3027);+#3026 = PCURVE('',#2683,#3027); #3027 = DEFINITIONAL_REPRESENTATION('',(#3028),#3032); #3028 = LINE('',#3029,#3030);-#3029 = CARTESIAN_POINT('',(0.,-0.15));+#3029 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #3030 = VECTOR('',#3031,1.);-#3031 = DIRECTION('',(1.,0.));+#3031 = DIRECTION('',(-0.839949759337,0.542664170358)); #3032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3033 = ORIENTED_EDGE('',*,*,#2782,.T.);-#3034 = ADVANCED_FACE('',(#3035),#2770,.F.);-#3035 = FACE_BOUND('',#3036,.F.);-#3036 = EDGE_LOOP('',(#3037,#3060,#3061,#3062));-#3037 = ORIENTED_EDGE('',*,*,#3038,.F.);-#3038 = EDGE_CURVE('',#2986,#3039,#3041,.T.);-#3039 = VERTEX_POINT('',#3040);-#3040 = CARTESIAN_POINT('',(-2.2,1.125,0.445));-#3041 = SURFACE_CURVE('',#3042,(#3046,#3053),.PCURVE_S1.);-#3042 = LINE('',#3043,#3044);-#3043 = CARTESIAN_POINT('',(-2.2,0.825,0.445));-#3044 = VECTOR('',#3045,1.);-#3045 = DIRECTION('',(0.,1.,0.));-#3046 = PCURVE('',#2770,#3047);-#3047 = DEFINITIONAL_REPRESENTATION('',(#3048),#3052);-#3048 = LINE('',#3049,#3050);-#3049 = CARTESIAN_POINT('',(0.,-0.15));-#3050 = VECTOR('',#3051,1.);-#3051 = DIRECTION('',(0.,1.));-#3052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3053 = PCURVE('',#3001,#3054);-#3054 = DEFINITIONAL_REPRESENTATION('',(#3055),#3059);-#3055 = LINE('',#3056,#3057);-#3056 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#3057 = VECTOR('',#3058,1.);-#3058 = DIRECTION('',(0.,1.));-#3059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3060 = ORIENTED_EDGE('',*,*,#3013,.T.);-#3061 = ORIENTED_EDGE('',*,*,#2752,.T.);-#3062 = ORIENTED_EDGE('',*,*,#3063,.F.);-#3063 = EDGE_CURVE('',#3039,#2755,#3064,.T.);-#3064 = SURFACE_CURVE('',#3065,(#3069,#3076),.PCURVE_S1.);-#3065 = LINE('',#3066,#3067);-#3066 = CARTESIAN_POINT('',(-2.2,1.125,0.445));-#3067 = VECTOR('',#3068,1.);-#3068 = DIRECTION('',(1.,0.,0.));-#3069 = PCURVE('',#2770,#3070);-#3070 = DEFINITIONAL_REPRESENTATION('',(#3071),#3075);-#3071 = LINE('',#3072,#3073);-#3072 = CARTESIAN_POINT('',(0.,0.15));-#3073 = VECTOR('',#3074,1.);-#3074 = DIRECTION('',(1.,0.));-#3075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3076 = PCURVE('',#2737,#3077);-#3077 = DEFINITIONAL_REPRESENTATION('',(#3078),#3082);-#3078 = LINE('',#3079,#3080);-#3079 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#3080 = VECTOR('',#3081,1.);-#3081 = DIRECTION('',(0.,1.));-#3082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3083 = ADVANCED_FACE('',(#3084),#2867,.F.);-#3084 = FACE_BOUND('',#3085,.F.);-#3085 = EDGE_LOOP('',(#3086,#3087,#3110,#3131));-#3086 = ORIENTED_EDGE('',*,*,#2906,.T.);-#3087 = ORIENTED_EDGE('',*,*,#3088,.F.);-#3088 = EDGE_CURVE('',#3089,#2907,#3091,.T.);-#3089 = VERTEX_POINT('',#3090);-#3090 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#3091 = SURFACE_CURVE('',#3092,(#3096,#3103),.PCURVE_S1.);-#3092 = LINE('',#3093,#3094);-#3093 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#3094 = VECTOR('',#3095,1.);-#3095 = DIRECTION('',(0.,-1.,0.));-#3096 = PCURVE('',#2867,#3097);-#3097 = DEFINITIONAL_REPRESENTATION('',(#3098),#3102);-#3098 = LINE('',#3099,#3100);-#3099 = CARTESIAN_POINT('',(0.5675,0.15));-#3100 = VECTOR('',#3101,1.);-#3101 = DIRECTION('',(0.,-1.));-#3102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3103 = PCURVE('',#2945,#3104);-#3104 = DEFINITIONAL_REPRESENTATION('',(#3105),#3109);-#3105 = LINE('',#3106,#3107);-#3106 = CARTESIAN_POINT('',(0.,0.15));-#3107 = VECTOR('',#3108,1.);-#3108 = DIRECTION('',(0.,-1.));-#3109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3110 = ORIENTED_EDGE('',*,*,#3111,.F.);-#3111 = EDGE_CURVE('',#2852,#3089,#3112,.T.);+#3033 = ORIENTED_EDGE('',*,*,#2940,.T.);+#3034 = ORIENTED_EDGE('',*,*,#2860,.F.);+#3035 = ORIENTED_EDGE('',*,*,#3036,.T.);+#3036 = EDGE_CURVE('',#2833,#3012,#3037,.T.);+#3037 = SURFACE_CURVE('',#3038,(#3042,#3049),.PCURVE_S1.);+#3038 = LINE('',#3039,#3040);+#3039 = CARTESIAN_POINT('',(-2.4875,1.125,0.));+#3040 = VECTOR('',#3041,1.);+#3041 = DIRECTION('',(0.,-1.,0.));+#3042 = PCURVE('',#2876,#3043);+#3043 = DEFINITIONAL_REPRESENTATION('',(#3044),#3048);+#3044 = LINE('',#3045,#3046);+#3045 = CARTESIAN_POINT('',(0.,0.15));+#3046 = VECTOR('',#3047,1.);+#3047 = DIRECTION('',(0.,-1.));+#3048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3049 = PCURVE('',#2848,#3050);+#3050 = DEFINITIONAL_REPRESENTATION('',(#3051),#3055);+#3051 = LINE('',#3052,#3053);+#3052 = CARTESIAN_POINT('',(0.7175,0.15));+#3053 = VECTOR('',#3054,1.);+#3054 = DIRECTION('',(0.,-1.));+#3055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3056 = ADVANCED_FACE('',(#3057),#2848,.F.);+#3057 = FACE_BOUND('',#3058,.F.);+#3058 = EDGE_LOOP('',(#3059,#3082,#3083,#3084));+#3059 = ORIENTED_EDGE('',*,*,#3060,.T.);+#3060 = EDGE_CURVE('',#3061,#3012,#3063,.T.);+#3061 = VERTEX_POINT('',#3062);+#3062 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#3063 = SURFACE_CURVE('',#3064,(#3068,#3075),.PCURVE_S1.);+#3064 = LINE('',#3065,#3066);+#3065 = CARTESIAN_POINT('',(-3.205,0.825,0.));+#3066 = VECTOR('',#3067,1.);+#3067 = DIRECTION('',(1.,0.,0.));+#3068 = PCURVE('',#2848,#3069);+#3069 = DEFINITIONAL_REPRESENTATION('',(#3070),#3074);+#3070 = LINE('',#3071,#3072);+#3071 = CARTESIAN_POINT('',(0.,-0.15));+#3072 = VECTOR('',#3073,1.);+#3073 = DIRECTION('',(1.,0.));+#3074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3075 = PCURVE('',#2683,#3076);+#3076 = DEFINITIONAL_REPRESENTATION('',(#3077),#3081);+#3077 = LINE('',#3078,#3079);+#3078 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3079 = VECTOR('',#3080,1.);+#3080 = DIRECTION('',(0.,1.));+#3081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3082 = ORIENTED_EDGE('',*,*,#3036,.F.);+#3083 = ORIENTED_EDGE('',*,*,#2832,.F.);+#3084 = ORIENTED_EDGE('',*,*,#3085,.T.);+#3085 = EDGE_CURVE('',#2805,#3061,#3086,.T.);+#3086 = SURFACE_CURVE('',#3087,(#3091,#3098),.PCURVE_S1.);+#3087 = LINE('',#3088,#3089);+#3088 = CARTESIAN_POINT('',(-3.205,1.125,0.));+#3089 = VECTOR('',#3090,1.);+#3090 = DIRECTION('',(0.,-1.,0.));+#3091 = PCURVE('',#2848,#3092);+#3092 = DEFINITIONAL_REPRESENTATION('',(#3093),#3097);+#3093 = LINE('',#3094,#3095);+#3094 = CARTESIAN_POINT('',(0.,0.15));+#3095 = VECTOR('',#3096,1.);+#3096 = DIRECTION('',(0.,-1.));+#3097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3098 = PCURVE('',#2820,#3099);+#3099 = DEFINITIONAL_REPRESENTATION('',(#3100),#3104);+#3100 = LINE('',#3101,#3102);+#3101 = CARTESIAN_POINT('',(0.15,0.15));+#3102 = VECTOR('',#3103,1.);+#3103 = DIRECTION('',(0.,-1.));+#3104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3105 = ADVANCED_FACE('',(#3106),#2820,.F.);+#3106 = FACE_BOUND('',#3107,.F.);+#3107 = EDGE_LOOP('',(#3108,#3131,#3132,#3133));+#3108 = ORIENTED_EDGE('',*,*,#3109,.T.);+#3109 = EDGE_CURVE('',#3110,#3061,#3112,.T.);+#3110 = VERTEX_POINT('',#3111);+#3111 = CARTESIAN_POINT('',(-3.205,0.825,0.15)); #3112 = SURFACE_CURVE('',#3113,(#3117,#3124),.PCURVE_S1.); #3113 = LINE('',#3114,#3115);-#3114 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#3114 = CARTESIAN_POINT('',(-3.205,0.825,0.15)); #3115 = VECTOR('',#3116,1.);-#3116 = DIRECTION('',(-1.,0.,0.));-#3117 = PCURVE('',#2867,#3118);+#3116 = DIRECTION('',(0.,0.,-1.));+#3117 = PCURVE('',#2820,#3118); #3118 = DEFINITIONAL_REPRESENTATION('',(#3119),#3123); #3119 = LINE('',#3120,#3121);-#3120 = CARTESIAN_POINT('',(0.,0.15));+#3120 = CARTESIAN_POINT('',(0.,-0.15)); #3121 = VECTOR('',#3122,1.); #3122 = DIRECTION('',(1.,0.)); #3123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3124 = PCURVE('',#2737,#3125);+#3124 = PCURVE('',#2683,#3125); #3125 = DEFINITIONAL_REPRESENTATION('',(#3126),#3130); #3126 = LINE('',#3127,#3128);-#3127 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#3127 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #3128 = VECTOR('',#3129,1.);-#3129 = DIRECTION('',(0.,-1.));+#3129 = DIRECTION('',(1.,0.)); #3130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3131 = ORIENTED_EDGE('',*,*,#2851,.T.);-#3132 = ADVANCED_FACE('',(#3133),#2737,.F.);-#3133 = FACE_BOUND('',#3134,.F.);-#3134 = EDGE_LOOP('',(#3135,#3136,#3137,#3138,#3161,#3184,#3205,#3206));-#3135 = ORIENTED_EDGE('',*,*,#2723,.T.);-#3136 = ORIENTED_EDGE('',*,*,#2879,.T.);-#3137 = ORIENTED_EDGE('',*,*,#3111,.T.);-#3138 = ORIENTED_EDGE('',*,*,#3139,.T.);-#3139 = EDGE_CURVE('',#3089,#3140,#3142,.T.);-#3140 = VERTEX_POINT('',#3141);-#3141 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#3142 = SURFACE_CURVE('',#3143,(#3147,#3154),.PCURVE_S1.);-#3143 = LINE('',#3144,#3145);-#3144 = CARTESIAN_POINT('',(-3.205,1.125,0.15));-#3145 = VECTOR('',#3146,1.);-#3146 = DIRECTION('',(0.,0.,-1.));-#3147 = PCURVE('',#2737,#3148);+#3131 = ORIENTED_EDGE('',*,*,#3085,.F.);+#3132 = ORIENTED_EDGE('',*,*,#2804,.F.);+#3133 = ORIENTED_EDGE('',*,*,#3134,.T.);+#3134 = EDGE_CURVE('',#2777,#3110,#3135,.T.);+#3135 = SURFACE_CURVE('',#3136,(#3140,#3147),.PCURVE_S1.);+#3136 = LINE('',#3137,#3138);+#3137 = CARTESIAN_POINT('',(-3.205,1.125,0.15));+#3138 = VECTOR('',#3139,1.);+#3139 = DIRECTION('',(0.,-1.,0.));+#3140 = PCURVE('',#2820,#3141);+#3141 = DEFINITIONAL_REPRESENTATION('',(#3142),#3146);+#3142 = LINE('',#3143,#3144);+#3143 = CARTESIAN_POINT('',(0.,0.15));+#3144 = VECTOR('',#3145,1.);+#3145 = DIRECTION('',(0.,-1.));+#3146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3147 = PCURVE('',#2792,#3148); #3148 = DEFINITIONAL_REPRESENTATION('',(#3149),#3153); #3149 = LINE('',#3150,#3151);-#3150 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3150 = CARTESIAN_POINT('',(0.5675,0.15)); #3151 = VECTOR('',#3152,1.);-#3152 = DIRECTION('',(1.,0.));+#3152 = DIRECTION('',(0.,-1.)); #3153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3154 = PCURVE('',#2945,#3155);-#3155 = DEFINITIONAL_REPRESENTATION('',(#3156),#3160);-#3156 = LINE('',#3157,#3158);-#3157 = CARTESIAN_POINT('',(0.,0.15));-#3158 = VECTOR('',#3159,1.);-#3159 = DIRECTION('',(1.,0.));-#3160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3161 = ORIENTED_EDGE('',*,*,#3162,.T.);-#3162 = EDGE_CURVE('',#3140,#3163,#3165,.T.);-#3163 = VERTEX_POINT('',#3164);-#3164 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#3165 = SURFACE_CURVE('',#3166,(#3170,#3177),.PCURVE_S1.);-#3166 = LINE('',#3167,#3168);-#3167 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#3168 = VECTOR('',#3169,1.);-#3169 = DIRECTION('',(1.,0.,0.));-#3170 = PCURVE('',#2737,#3171);-#3171 = DEFINITIONAL_REPRESENTATION('',(#3172),#3176);-#3172 = LINE('',#3173,#3174);-#3173 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#3174 = VECTOR('',#3175,1.);-#3175 = DIRECTION('',(0.,1.));-#3176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3177 = PCURVE('',#2973,#3178);-#3178 = DEFINITIONAL_REPRESENTATION('',(#3179),#3183);-#3179 = LINE('',#3180,#3181);-#3180 = CARTESIAN_POINT('',(0.,0.15));-#3181 = VECTOR('',#3182,1.);-#3182 = DIRECTION('',(1.,0.));-#3183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3184 = ORIENTED_EDGE('',*,*,#3185,.T.);-#3185 = EDGE_CURVE('',#3163,#3039,#3186,.T.);-#3186 = SURFACE_CURVE('',#3187,(#3191,#3198),.PCURVE_S1.);-#3187 = LINE('',#3188,#3189);-#3188 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#3189 = VECTOR('',#3190,1.);-#3190 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3191 = PCURVE('',#2737,#3192);-#3192 = DEFINITIONAL_REPRESENTATION('',(#3193),#3197);-#3193 = LINE('',#3194,#3195);-#3194 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#3195 = VECTOR('',#3196,1.);-#3196 = DIRECTION('',(-0.839949759337,0.542664170358));-#3197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3198 = PCURVE('',#3001,#3199);-#3199 = DEFINITIONAL_REPRESENTATION('',(#3200),#3204);-#3200 = LINE('',#3201,#3202);-#3201 = CARTESIAN_POINT('',(0.,0.15));-#3202 = VECTOR('',#3203,1.);-#3203 = DIRECTION('',(1.,0.));-#3204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3205 = ORIENTED_EDGE('',*,*,#3063,.T.);-#3206 = ORIENTED_EDGE('',*,*,#2804,.T.);-#3207 = ADVANCED_FACE('',(#3208),#2945,.F.);-#3208 = FACE_BOUND('',#3209,.F.);-#3209 = EDGE_LOOP('',(#3210,#3211,#3232,#3233));-#3210 = ORIENTED_EDGE('',*,*,#2929,.T.);-#3211 = ORIENTED_EDGE('',*,*,#3212,.F.);-#3212 = EDGE_CURVE('',#3140,#2930,#3213,.T.);-#3213 = SURFACE_CURVE('',#3214,(#3218,#3225),.PCURVE_S1.);-#3214 = LINE('',#3215,#3216);-#3215 = CARTESIAN_POINT('',(-3.205,1.125,0.));-#3216 = VECTOR('',#3217,1.);-#3217 = DIRECTION('',(0.,-1.,0.));-#3218 = PCURVE('',#2945,#3219);-#3219 = DEFINITIONAL_REPRESENTATION('',(#3220),#3224);-#3220 = LINE('',#3221,#3222);-#3221 = CARTESIAN_POINT('',(0.15,0.15));-#3222 = VECTOR('',#3223,1.);-#3223 = DIRECTION('',(0.,-1.));-#3224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3225 = PCURVE('',#2973,#3226);-#3226 = DEFINITIONAL_REPRESENTATION('',(#3227),#3231);-#3227 = LINE('',#3228,#3229);-#3228 = CARTESIAN_POINT('',(0.,0.15));-#3229 = VECTOR('',#3230,1.);-#3230 = DIRECTION('',(0.,-1.));-#3231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3232 = ORIENTED_EDGE('',*,*,#3139,.F.);-#3233 = ORIENTED_EDGE('',*,*,#3088,.T.);-#3234 = ADVANCED_FACE('',(#3235),#2973,.F.);-#3235 = FACE_BOUND('',#3236,.F.);-#3236 = EDGE_LOOP('',(#3237,#3238,#3259,#3260));-#3237 = ORIENTED_EDGE('',*,*,#2957,.T.);-#3238 = ORIENTED_EDGE('',*,*,#3239,.F.);-#3239 = EDGE_CURVE('',#3163,#2958,#3240,.T.);-#3240 = SURFACE_CURVE('',#3241,(#3245,#3252),.PCURVE_S1.);-#3241 = LINE('',#3242,#3243);-#3242 = CARTESIAN_POINT('',(-2.4875,1.125,0.));-#3243 = VECTOR('',#3244,1.);-#3244 = DIRECTION('',(0.,-1.,0.));-#3245 = PCURVE('',#2973,#3246);-#3246 = DEFINITIONAL_REPRESENTATION('',(#3247),#3251);-#3247 = LINE('',#3248,#3249);-#3248 = CARTESIAN_POINT('',(0.7175,0.15));-#3249 = VECTOR('',#3250,1.);-#3250 = DIRECTION('',(0.,-1.));-#3251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3252 = PCURVE('',#3001,#3253);-#3253 = DEFINITIONAL_REPRESENTATION('',(#3254),#3258);-#3254 = LINE('',#3255,#3256);-#3255 = CARTESIAN_POINT('',(0.,0.15));-#3256 = VECTOR('',#3257,1.);-#3257 = DIRECTION('',(0.,-1.));-#3258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3259 = ORIENTED_EDGE('',*,*,#3162,.F.);-#3260 = ORIENTED_EDGE('',*,*,#3212,.T.);-#3261 = ADVANCED_FACE('',(#3262),#3001,.F.);+#3154 = ADVANCED_FACE('',(#3155),#2792,.F.);+#3155 = FACE_BOUND('',#3156,.F.);+#3156 = EDGE_LOOP('',(#3157,#3180,#3181,#3182));+#3157 = ORIENTED_EDGE('',*,*,#3158,.T.);+#3158 = EDGE_CURVE('',#3159,#3110,#3161,.T.);+#3159 = VERTEX_POINT('',#3160);+#3160 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#3161 = SURFACE_CURVE('',#3162,(#3166,#3173),.PCURVE_S1.);+#3162 = LINE('',#3163,#3164);+#3163 = CARTESIAN_POINT('',(-2.6375,0.825,0.15));+#3164 = VECTOR('',#3165,1.);+#3165 = DIRECTION('',(-1.,0.,0.));+#3166 = PCURVE('',#2792,#3167);+#3167 = DEFINITIONAL_REPRESENTATION('',(#3168),#3172);+#3168 = LINE('',#3169,#3170);+#3169 = CARTESIAN_POINT('',(0.,-0.15));+#3170 = VECTOR('',#3171,1.);+#3171 = DIRECTION('',(1.,0.));+#3172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3173 = PCURVE('',#2683,#3174);+#3174 = DEFINITIONAL_REPRESENTATION('',(#3175),#3179);+#3175 = LINE('',#3176,#3177);+#3176 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#3177 = VECTOR('',#3178,1.);+#3178 = DIRECTION('',(0.,-1.));+#3179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3180 = ORIENTED_EDGE('',*,*,#3134,.F.);+#3181 = ORIENTED_EDGE('',*,*,#2776,.F.);+#3182 = ORIENTED_EDGE('',*,*,#3183,.T.);+#3183 = EDGE_CURVE('',#2754,#3159,#3184,.T.);+#3184 = SURFACE_CURVE('',#3185,(#3189,#3196),.PCURVE_S1.);+#3185 = LINE('',#3186,#3187);+#3186 = CARTESIAN_POINT('',(-2.6375,1.125,0.15));+#3187 = VECTOR('',#3188,1.);+#3188 = DIRECTION('',(0.,-1.,0.));+#3189 = PCURVE('',#2792,#3190);+#3190 = DEFINITIONAL_REPRESENTATION('',(#3191),#3195);+#3191 = LINE('',#3192,#3193);+#3192 = CARTESIAN_POINT('',(0.,0.15));+#3193 = VECTOR('',#3194,1.);+#3194 = DIRECTION('',(0.,-1.));+#3195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3196 = PCURVE('',#2711,#3197);+#3197 = DEFINITIONAL_REPRESENTATION('',(#3198),#3202);+#3198 = LINE('',#3199,#3200);+#3199 = CARTESIAN_POINT('',(0.529793591883,0.15));+#3200 = VECTOR('',#3201,1.);+#3201 = DIRECTION('',(-0.,-1.));+#3202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3203 = ADVANCED_FACE('',(#3204),#2711,.F.);+#3204 = FACE_BOUND('',#3205,.F.);+#3205 = EDGE_LOOP('',(#3206,#3227,#3228,#3229));+#3206 = ORIENTED_EDGE('',*,*,#3207,.T.);+#3207 = EDGE_CURVE('',#2668,#3159,#3208,.T.);+#3208 = SURFACE_CURVE('',#3209,(#3213,#3220),.PCURVE_S1.);+#3209 = LINE('',#3210,#3211);+#3210 = CARTESIAN_POINT('',(-2.35,0.825,0.595));+#3211 = VECTOR('',#3212,1.);+#3212 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3213 = PCURVE('',#2711,#3214);+#3214 = DEFINITIONAL_REPRESENTATION('',(#3215),#3219);+#3215 = LINE('',#3216,#3217);+#3216 = CARTESIAN_POINT('',(-0.,-0.15));+#3217 = VECTOR('',#3218,1.);+#3218 = DIRECTION('',(1.,0.));+#3219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3220 = PCURVE('',#2683,#3221);+#3221 = DEFINITIONAL_REPRESENTATION('',(#3222),#3226);+#3222 = LINE('',#3223,#3224);+#3223 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3224 = VECTOR('',#3225,1.);+#3225 = DIRECTION('',(0.839949759337,-0.542664170358));+#3226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3227 = ORIENTED_EDGE('',*,*,#3183,.F.);+#3228 = ORIENTED_EDGE('',*,*,#2753,.F.);+#3229 = ORIENTED_EDGE('',*,*,#2695,.T.);+#3230 = ADVANCED_FACE('',(#3231),#2683,.T.);+#3231 = FACE_BOUND('',#3232,.T.);+#3232 = EDGE_LOOP('',(#3233,#3234,#3235,#3236,#3237,#3238,#3239,#3240));+#3233 = ORIENTED_EDGE('',*,*,#2667,.T.);+#3234 = ORIENTED_EDGE('',*,*,#3207,.T.);+#3235 = ORIENTED_EDGE('',*,*,#3158,.T.);+#3236 = ORIENTED_EDGE('',*,*,#3109,.T.);+#3237 = ORIENTED_EDGE('',*,*,#3060,.T.);+#3238 = ORIENTED_EDGE('',*,*,#3011,.T.);+#3239 = ORIENTED_EDGE('',*,*,#2963,.T.);+#3240 = ORIENTED_EDGE('',*,*,#3241,.T.);+#3241 = EDGE_CURVE('',#2964,#2633,#3242,.T.);+#3242 = SURFACE_CURVE('',#3243,(#3247,#3254),.PCURVE_S1.);+#3243 = LINE('',#3244,#3245);+#3244 = CARTESIAN_POINT('',(-2.15,0.825,0.445));+#3245 = VECTOR('',#3246,1.);+#3246 = DIRECTION('',(0.,0.,1.));+#3247 = PCURVE('',#2683,#3248);+#3248 = DEFINITIONAL_REPRESENTATION('',(#3249),#3253);+#3249 = LINE('',#3250,#3251);+#3250 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3251 = VECTOR('',#3252,1.);+#3252 = DIRECTION('',(-1.,0.));+#3253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3254 = PCURVE('',#2655,#3255);+#3255 = DEFINITIONAL_REPRESENTATION('',(#3256),#3260);+#3256 = LINE('',#3257,#3258);+#3257 = CARTESIAN_POINT('',(0.,-0.15));+#3258 = VECTOR('',#3259,1.);+#3259 = DIRECTION('',(1.,0.));+#3260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3261 = ADVANCED_FACE('',(#3262),#2655,.F.); #3262 = FACE_BOUND('',#3263,.F.); #3263 = EDGE_LOOP('',(#3264,#3265,#3266,#3267));-#3264 = ORIENTED_EDGE('',*,*,#2985,.T.);-#3265 = ORIENTED_EDGE('',*,*,#3038,.T.);-#3266 = ORIENTED_EDGE('',*,*,#3185,.F.);-#3267 = ORIENTED_EDGE('',*,*,#3239,.T.);+#3264 = ORIENTED_EDGE('',*,*,#2986,.F.);+#3265 = ORIENTED_EDGE('',*,*,#3241,.T.);+#3266 = ORIENTED_EDGE('',*,*,#2632,.T.);+#3267 = ORIENTED_EDGE('',*,*,#2916,.F.); #3268 = MANIFOLD_SOLID_BREP('',#3269);-#3269 = CLOSED_SHELL('',(#3270,#3390,#3466,#3542,#3676,#3725,#3774,#3849- ,#3876,#3903));+#3269 = CLOSED_SHELL('',(#3270,#3390,#3578,#3649,#3698,#3747,#3796,#3845+ ,#3872,#3903)); #3270 = ADVANCED_FACE('',(#3271),#3285,.F.); #3271 = FACE_BOUND('',#3272,.F.); #3272 = EDGE_LOOP('',(#3273,#3308,#3336,#3364));@@ -3917,609 +3917,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #3389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3390 = ADVANCED_FACE('',(#3391),#3297,.F.);+#3390 = ADVANCED_FACE('',(#3391),#3379,.F.); #3391 = FACE_BOUND('',#3392,.F.);-#3392 = EDGE_LOOP('',(#3393,#3423,#3444,#3445));-#3393 = ORIENTED_EDGE('',*,*,#3394,.F.);-#3394 = EDGE_CURVE('',#3395,#3397,#3399,.T.);-#3395 = VERTEX_POINT('',#3396);-#3396 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#3397 = VERTEX_POINT('',#3398);-#3398 = CARTESIAN_POINT('',(-2.15,0.475,0.445));-#3399 = SURFACE_CURVE('',#3400,(#3404,#3411),.PCURVE_S1.);-#3400 = LINE('',#3401,#3402);-#3401 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#3402 = VECTOR('',#3403,1.);-#3403 = DIRECTION('',(0.,1.,0.));-#3404 = PCURVE('',#3297,#3405);-#3405 = DEFINITIONAL_REPRESENTATION('',(#3406),#3410);-#3406 = LINE('',#3407,#3408);-#3407 = CARTESIAN_POINT('',(0.,-0.15));-#3408 = VECTOR('',#3409,1.);-#3409 = DIRECTION('',(0.,1.));-#3410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3411 = PCURVE('',#3412,#3417);-#3412 = PLANE('',#3413);-#3413 = AXIS2_PLACEMENT_3D('',#3414,#3415,#3416);-#3414 = CARTESIAN_POINT('',(-2.2,0.325,0.445));-#3415 = DIRECTION('',(-0.,0.,1.));-#3416 = DIRECTION('',(1.,0.,0.));-#3417 = DEFINITIONAL_REPRESENTATION('',(#3418),#3422);-#3418 = LINE('',#3419,#3420);-#3419 = CARTESIAN_POINT('',(5.E-02,-0.15));-#3420 = VECTOR('',#3421,1.);-#3421 = DIRECTION('',(0.,1.));-#3422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3423 = ORIENTED_EDGE('',*,*,#3424,.T.);-#3424 = EDGE_CURVE('',#3395,#3275,#3425,.T.);-#3425 = SURFACE_CURVE('',#3426,(#3430,#3437),.PCURVE_S1.);-#3426 = LINE('',#3427,#3428);-#3427 = CARTESIAN_POINT('',(-2.15,0.175,0.445));-#3428 = VECTOR('',#3429,1.);-#3429 = DIRECTION('',(0.,0.,1.));-#3430 = PCURVE('',#3297,#3431);-#3431 = DEFINITIONAL_REPRESENTATION('',(#3432),#3436);-#3432 = LINE('',#3433,#3434);-#3433 = CARTESIAN_POINT('',(0.,-0.15));-#3434 = VECTOR('',#3435,1.);-#3435 = DIRECTION('',(1.,0.));-#3436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3437 = PCURVE('',#3325,#3438);-#3438 = DEFINITIONAL_REPRESENTATION('',(#3439),#3443);-#3439 = LINE('',#3440,#3441);-#3440 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#3441 = VECTOR('',#3442,1.);-#3442 = DIRECTION('',(-1.,0.));-#3443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3444 = ORIENTED_EDGE('',*,*,#3274,.T.);-#3445 = ORIENTED_EDGE('',*,*,#3446,.F.);-#3446 = EDGE_CURVE('',#3397,#3277,#3447,.T.);-#3447 = SURFACE_CURVE('',#3448,(#3452,#3459),.PCURVE_S1.);-#3448 = LINE('',#3449,#3450);-#3449 = CARTESIAN_POINT('',(-2.15,0.475,0.445));-#3450 = VECTOR('',#3451,1.);-#3451 = DIRECTION('',(0.,0.,1.));-#3452 = PCURVE('',#3297,#3453);-#3453 = DEFINITIONAL_REPRESENTATION('',(#3454),#3458);-#3454 = LINE('',#3455,#3456);-#3455 = CARTESIAN_POINT('',(0.,0.15));-#3456 = VECTOR('',#3457,1.);-#3457 = DIRECTION('',(1.,0.));-#3458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3459 = PCURVE('',#3379,#3460);-#3460 = DEFINITIONAL_REPRESENTATION('',(#3461),#3465);-#3461 = LINE('',#3462,#3463);-#3462 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#3463 = VECTOR('',#3464,1.);-#3464 = DIRECTION('',(-1.,0.));-#3465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3466 = ADVANCED_FACE('',(#3467),#3353,.F.);-#3467 = FACE_BOUND('',#3468,.F.);-#3468 = EDGE_LOOP('',(#3469,#3492,#3520,#3541));-#3469 = ORIENTED_EDGE('',*,*,#3470,.T.);-#3470 = EDGE_CURVE('',#3310,#3471,#3473,.T.);-#3471 = VERTEX_POINT('',#3472);-#3472 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));-#3473 = SURFACE_CURVE('',#3474,(#3478,#3485),.PCURVE_S1.);-#3474 = LINE('',#3475,#3476);-#3475 = CARTESIAN_POINT('',(-2.35,0.175,0.595));-#3476 = VECTOR('',#3477,1.);-#3477 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#3478 = PCURVE('',#3353,#3479);-#3479 = DEFINITIONAL_REPRESENTATION('',(#3480),#3484);-#3480 = LINE('',#3481,#3482);-#3481 = CARTESIAN_POINT('',(-0.,-0.15));-#3482 = VECTOR('',#3483,1.);-#3483 = DIRECTION('',(1.,0.));-#3484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3485 = PCURVE('',#3325,#3486);-#3486 = DEFINITIONAL_REPRESENTATION('',(#3487),#3491);-#3487 = LINE('',#3488,#3489);-#3488 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#3489 = VECTOR('',#3490,1.);-#3490 = DIRECTION('',(0.839949759337,-0.542664170358));-#3491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3492 = ORIENTED_EDGE('',*,*,#3493,.F.);-#3493 = EDGE_CURVE('',#3494,#3471,#3496,.T.);-#3494 = VERTEX_POINT('',#3495);-#3495 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));-#3496 = SURFACE_CURVE('',#3497,(#3501,#3508),.PCURVE_S1.);-#3497 = LINE('',#3498,#3499);-#3498 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));-#3499 = VECTOR('',#3500,1.);-#3500 = DIRECTION('',(0.,-1.,0.));-#3501 = PCURVE('',#3353,#3502);-#3502 = DEFINITIONAL_REPRESENTATION('',(#3503),#3507);-#3503 = LINE('',#3504,#3505);-#3504 = CARTESIAN_POINT('',(0.529793591883,0.15));-#3505 = VECTOR('',#3506,1.);-#3506 = DIRECTION('',(-0.,-1.));-#3507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3508 = PCURVE('',#3509,#3514);-#3509 = PLANE('',#3510);-#3510 = AXIS2_PLACEMENT_3D('',#3511,#3512,#3513);-#3511 = CARTESIAN_POINT('',(-2.6375,0.325,0.15));-#3512 = DIRECTION('',(-0.,-0.,-1.));-#3513 = DIRECTION('',(-1.,0.,0.));-#3514 = DEFINITIONAL_REPRESENTATION('',(#3515),#3519);-#3515 = LINE('',#3516,#3517);-#3516 = CARTESIAN_POINT('',(0.,0.15));-#3517 = VECTOR('',#3518,1.);-#3518 = DIRECTION('',(0.,-1.));-#3519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3520 = ORIENTED_EDGE('',*,*,#3521,.F.);-#3521 = EDGE_CURVE('',#3338,#3494,#3522,.T.);-#3522 = SURFACE_CURVE('',#3523,(#3527,#3534),.PCURVE_S1.);-#3523 = LINE('',#3524,#3525);-#3524 = CARTESIAN_POINT('',(-2.35,0.475,0.595));-#3525 = VECTOR('',#3526,1.);-#3526 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#3527 = PCURVE('',#3353,#3528);-#3528 = DEFINITIONAL_REPRESENTATION('',(#3529),#3533);-#3529 = LINE('',#3530,#3531);-#3530 = CARTESIAN_POINT('',(0.,0.15));-#3531 = VECTOR('',#3532,1.);-#3532 = DIRECTION('',(1.,0.));-#3533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3534 = PCURVE('',#3379,#3535);-#3535 = DEFINITIONAL_REPRESENTATION('',(#3536),#3540);-#3536 = LINE('',#3537,#3538);-#3537 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#3538 = VECTOR('',#3539,1.);-#3539 = DIRECTION('',(0.839949759337,-0.542664170358));-#3540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3541 = ORIENTED_EDGE('',*,*,#3337,.T.);-#3542 = ADVANCED_FACE('',(#3543),#3325,.T.);-#3543 = FACE_BOUND('',#3544,.T.);-#3544 = EDGE_LOOP('',(#3545,#3546,#3547,#3570,#3598,#3626,#3654,#3675));-#3545 = ORIENTED_EDGE('',*,*,#3309,.T.);-#3546 = ORIENTED_EDGE('',*,*,#3470,.T.);-#3547 = ORIENTED_EDGE('',*,*,#3548,.T.);-#3548 = EDGE_CURVE('',#3471,#3549,#3551,.T.);-#3549 = VERTEX_POINT('',#3550);-#3550 = CARTESIAN_POINT('',(-3.205,0.175,0.15));-#3551 = SURFACE_CURVE('',#3552,(#3556,#3563),.PCURVE_S1.);+#3392 = EDGE_LOOP('',(#3393,#3394,#3417,#3445,#3473,#3501,#3529,#3557));+#3393 = ORIENTED_EDGE('',*,*,#3365,.T.);+#3394 = ORIENTED_EDGE('',*,*,#3395,.T.);+#3395 = EDGE_CURVE('',#3338,#3396,#3398,.T.);+#3396 = VERTEX_POINT('',#3397);+#3397 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3398 = SURFACE_CURVE('',#3399,(#3403,#3410),.PCURVE_S1.);+#3399 = LINE('',#3400,#3401);+#3400 = CARTESIAN_POINT('',(-2.35,0.475,0.595));+#3401 = VECTOR('',#3402,1.);+#3402 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3403 = PCURVE('',#3379,#3404);+#3404 = DEFINITIONAL_REPRESENTATION('',(#3405),#3409);+#3405 = LINE('',#3406,#3407);+#3406 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3407 = VECTOR('',#3408,1.);+#3408 = DIRECTION('',(0.839949759337,-0.542664170358));+#3409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3410 = PCURVE('',#3353,#3411);+#3411 = DEFINITIONAL_REPRESENTATION('',(#3412),#3416);+#3412 = LINE('',#3413,#3414);+#3413 = CARTESIAN_POINT('',(0.,0.15));+#3414 = VECTOR('',#3415,1.);+#3415 = DIRECTION('',(1.,0.));+#3416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3417 = ORIENTED_EDGE('',*,*,#3418,.T.);+#3418 = EDGE_CURVE('',#3396,#3419,#3421,.T.);+#3419 = VERTEX_POINT('',#3420);+#3420 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3421 = SURFACE_CURVE('',#3422,(#3426,#3433),.PCURVE_S1.);+#3422 = LINE('',#3423,#3424);+#3423 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3424 = VECTOR('',#3425,1.);+#3425 = DIRECTION('',(-1.,0.,0.));+#3426 = PCURVE('',#3379,#3427);+#3427 = DEFINITIONAL_REPRESENTATION('',(#3428),#3432);+#3428 = LINE('',#3429,#3430);+#3429 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#3430 = VECTOR('',#3431,1.);+#3431 = DIRECTION('',(0.,-1.));+#3432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3433 = PCURVE('',#3434,#3439);+#3434 = PLANE('',#3435);+#3435 = AXIS2_PLACEMENT_3D('',#3436,#3437,#3438);+#3436 = CARTESIAN_POINT('',(-2.6375,0.325,0.15));+#3437 = DIRECTION('',(-0.,-0.,-1.));+#3438 = DIRECTION('',(-1.,0.,0.));+#3439 = DEFINITIONAL_REPRESENTATION('',(#3440),#3444);+#3440 = LINE('',#3441,#3442);+#3441 = CARTESIAN_POINT('',(0.,0.15));+#3442 = VECTOR('',#3443,1.);+#3443 = DIRECTION('',(1.,0.));+#3444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3445 = ORIENTED_EDGE('',*,*,#3446,.T.);+#3446 = EDGE_CURVE('',#3419,#3447,#3449,.T.);+#3447 = VERTEX_POINT('',#3448);+#3448 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3449 = SURFACE_CURVE('',#3450,(#3454,#3461),.PCURVE_S1.);+#3450 = LINE('',#3451,#3452);+#3451 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3452 = VECTOR('',#3453,1.);+#3453 = DIRECTION('',(0.,0.,-1.));+#3454 = PCURVE('',#3379,#3455);+#3455 = DEFINITIONAL_REPRESENTATION('',(#3456),#3460);+#3456 = LINE('',#3457,#3458);+#3457 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3458 = VECTOR('',#3459,1.);+#3459 = DIRECTION('',(1.,0.));+#3460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3461 = PCURVE('',#3462,#3467);+#3462 = PLANE('',#3463);+#3463 = AXIS2_PLACEMENT_3D('',#3464,#3465,#3466);+#3464 = CARTESIAN_POINT('',(-3.205,0.325,0.15));+#3465 = DIRECTION('',(1.,0.,0.));+#3466 = DIRECTION('',(0.,0.,-1.));+#3467 = DEFINITIONAL_REPRESENTATION('',(#3468),#3472);+#3468 = LINE('',#3469,#3470);+#3469 = CARTESIAN_POINT('',(0.,0.15));+#3470 = VECTOR('',#3471,1.);+#3471 = DIRECTION('',(1.,0.));+#3472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3473 = ORIENTED_EDGE('',*,*,#3474,.T.);+#3474 = EDGE_CURVE('',#3447,#3475,#3477,.T.);+#3475 = VERTEX_POINT('',#3476);+#3476 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3477 = SURFACE_CURVE('',#3478,(#3482,#3489),.PCURVE_S1.);+#3478 = LINE('',#3479,#3480);+#3479 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3480 = VECTOR('',#3481,1.);+#3481 = DIRECTION('',(1.,0.,0.));+#3482 = PCURVE('',#3379,#3483);+#3483 = DEFINITIONAL_REPRESENTATION('',(#3484),#3488);+#3484 = LINE('',#3485,#3486);+#3485 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3486 = VECTOR('',#3487,1.);+#3487 = DIRECTION('',(0.,1.));+#3488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3489 = PCURVE('',#3490,#3495);+#3490 = PLANE('',#3491);+#3491 = AXIS2_PLACEMENT_3D('',#3492,#3493,#3494);+#3492 = CARTESIAN_POINT('',(-3.205,0.325,0.));+#3493 = DIRECTION('',(-0.,0.,1.));+#3494 = DIRECTION('',(1.,0.,0.));+#3495 = DEFINITIONAL_REPRESENTATION('',(#3496),#3500);+#3496 = LINE('',#3497,#3498);+#3497 = CARTESIAN_POINT('',(0.,0.15));+#3498 = VECTOR('',#3499,1.);+#3499 = DIRECTION('',(1.,0.));+#3500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3501 = ORIENTED_EDGE('',*,*,#3502,.T.);+#3502 = EDGE_CURVE('',#3475,#3503,#3505,.T.);+#3503 = VERTEX_POINT('',#3504);+#3504 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#3505 = SURFACE_CURVE('',#3506,(#3510,#3517),.PCURVE_S1.);+#3506 = LINE('',#3507,#3508);+#3507 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3508 = VECTOR('',#3509,1.);+#3509 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3510 = PCURVE('',#3379,#3511);+#3511 = DEFINITIONAL_REPRESENTATION('',(#3512),#3516);+#3512 = LINE('',#3513,#3514);+#3513 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#3514 = VECTOR('',#3515,1.);+#3515 = DIRECTION('',(-0.839949759337,0.542664170358));+#3516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3517 = PCURVE('',#3518,#3523);+#3518 = PLANE('',#3519);+#3519 = AXIS2_PLACEMENT_3D('',#3520,#3521,#3522);+#3520 = CARTESIAN_POINT('',(-2.4875,0.325,0.));+#3521 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#3522 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3523 = DEFINITIONAL_REPRESENTATION('',(#3524),#3528);+#3524 = LINE('',#3525,#3526);+#3525 = CARTESIAN_POINT('',(0.,0.15));+#3526 = VECTOR('',#3527,1.);+#3527 = DIRECTION('',(1.,0.));+#3528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3529 = ORIENTED_EDGE('',*,*,#3530,.T.);+#3530 = EDGE_CURVE('',#3503,#3531,#3533,.T.);+#3531 = VERTEX_POINT('',#3532);+#3532 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#3533 = SURFACE_CURVE('',#3534,(#3538,#3545),.PCURVE_S1.);+#3534 = LINE('',#3535,#3536);+#3535 = CARTESIAN_POINT('',(-2.2,0.475,0.445));+#3536 = VECTOR('',#3537,1.);+#3537 = DIRECTION('',(1.,0.,0.));+#3538 = PCURVE('',#3379,#3539);+#3539 = DEFINITIONAL_REPRESENTATION('',(#3540),#3544);+#3540 = LINE('',#3541,#3542);+#3541 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3542 = VECTOR('',#3543,1.);+#3543 = DIRECTION('',(0.,1.));+#3544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3545 = PCURVE('',#3546,#3551);+#3546 = PLANE('',#3547);+#3547 = AXIS2_PLACEMENT_3D('',#3548,#3549,#3550);+#3548 = CARTESIAN_POINT('',(-2.2,0.325,0.445));+#3549 = DIRECTION('',(-0.,0.,1.));+#3550 = DIRECTION('',(1.,0.,0.));+#3551 = DEFINITIONAL_REPRESENTATION('',(#3552),#3556); #3552 = LINE('',#3553,#3554);-#3553 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#3553 = CARTESIAN_POINT('',(0.,0.15)); #3554 = VECTOR('',#3555,1.);-#3555 = DIRECTION('',(-1.,0.,0.));-#3556 = PCURVE('',#3325,#3557);-#3557 = DEFINITIONAL_REPRESENTATION('',(#3558),#3562);-#3558 = LINE('',#3559,#3560);-#3559 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#3560 = VECTOR('',#3561,1.);-#3561 = DIRECTION('',(0.,-1.));-#3562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3563 = PCURVE('',#3509,#3564);-#3564 = DEFINITIONAL_REPRESENTATION('',(#3565),#3569);-#3565 = LINE('',#3566,#3567);-#3566 = CARTESIAN_POINT('',(0.,-0.15));-#3567 = VECTOR('',#3568,1.);-#3568 = DIRECTION('',(1.,0.));-#3569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3570 = ORIENTED_EDGE('',*,*,#3571,.T.);-#3571 = EDGE_CURVE('',#3549,#3572,#3574,.T.);-#3572 = VERTEX_POINT('',#3573);-#3573 = CARTESIAN_POINT('',(-3.205,0.175,0.));-#3574 = SURFACE_CURVE('',#3575,(#3579,#3586),.PCURVE_S1.);-#3575 = LINE('',#3576,#3577);-#3576 = CARTESIAN_POINT('',(-3.205,0.175,0.15));-#3577 = VECTOR('',#3578,1.);-#3578 = DIRECTION('',(0.,0.,-1.));-#3579 = PCURVE('',#3325,#3580);-#3580 = DEFINITIONAL_REPRESENTATION('',(#3581),#3585);-#3581 = LINE('',#3582,#3583);-#3582 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#3583 = VECTOR('',#3584,1.);-#3584 = DIRECTION('',(1.,0.));-#3585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3586 = PCURVE('',#3587,#3592);-#3587 = PLANE('',#3588);-#3588 = AXIS2_PLACEMENT_3D('',#3589,#3590,#3591);-#3589 = CARTESIAN_POINT('',(-3.205,0.325,0.15));-#3590 = DIRECTION('',(1.,0.,0.));-#3591 = DIRECTION('',(0.,0.,-1.));-#3592 = DEFINITIONAL_REPRESENTATION('',(#3593),#3597);-#3593 = LINE('',#3594,#3595);-#3594 = CARTESIAN_POINT('',(0.,-0.15));-#3595 = VECTOR('',#3596,1.);-#3596 = DIRECTION('',(1.,0.));-#3597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3598 = ORIENTED_EDGE('',*,*,#3599,.T.);-#3599 = EDGE_CURVE('',#3572,#3600,#3602,.T.);-#3600 = VERTEX_POINT('',#3601);-#3601 = CARTESIAN_POINT('',(-2.4875,0.175,0.));-#3602 = SURFACE_CURVE('',#3603,(#3607,#3614),.PCURVE_S1.);-#3603 = LINE('',#3604,#3605);-#3604 = CARTESIAN_POINT('',(-3.205,0.175,0.));-#3605 = VECTOR('',#3606,1.);-#3606 = DIRECTION('',(1.,0.,0.));-#3607 = PCURVE('',#3325,#3608);-#3608 = DEFINITIONAL_REPRESENTATION('',(#3609),#3613);+#3555 = DIRECTION('',(1.,0.));+#3556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3557 = ORIENTED_EDGE('',*,*,#3558,.T.);+#3558 = EDGE_CURVE('',#3531,#3277,#3559,.T.);+#3559 = SURFACE_CURVE('',#3560,(#3564,#3571),.PCURVE_S1.);+#3560 = LINE('',#3561,#3562);+#3561 = CARTESIAN_POINT('',(-2.15,0.475,0.445));+#3562 = VECTOR('',#3563,1.);+#3563 = DIRECTION('',(0.,0.,1.));+#3564 = PCURVE('',#3379,#3565);+#3565 = DEFINITIONAL_REPRESENTATION('',(#3566),#3570);+#3566 = LINE('',#3567,#3568);+#3567 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3568 = VECTOR('',#3569,1.);+#3569 = DIRECTION('',(-1.,0.));+#3570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3571 = PCURVE('',#3297,#3572);+#3572 = DEFINITIONAL_REPRESENTATION('',(#3573),#3577);+#3573 = LINE('',#3574,#3575);+#3574 = CARTESIAN_POINT('',(0.,0.15));+#3575 = VECTOR('',#3576,1.);+#3576 = DIRECTION('',(1.,0.));+#3577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3578 = ADVANCED_FACE('',(#3579),#3546,.F.);+#3579 = FACE_BOUND('',#3580,.F.);+#3580 = EDGE_LOOP('',(#3581,#3604,#3627,#3648));+#3581 = ORIENTED_EDGE('',*,*,#3582,.F.);+#3582 = EDGE_CURVE('',#3583,#3503,#3585,.T.);+#3583 = VERTEX_POINT('',#3584);+#3584 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3585 = SURFACE_CURVE('',#3586,(#3590,#3597),.PCURVE_S1.);+#3586 = LINE('',#3587,#3588);+#3587 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3588 = VECTOR('',#3589,1.);+#3589 = DIRECTION('',(0.,1.,0.));+#3590 = PCURVE('',#3546,#3591);+#3591 = DEFINITIONAL_REPRESENTATION('',(#3592),#3596);+#3592 = LINE('',#3593,#3594);+#3593 = CARTESIAN_POINT('',(0.,-0.15));+#3594 = VECTOR('',#3595,1.);+#3595 = DIRECTION('',(0.,1.));+#3596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3597 = PCURVE('',#3518,#3598);+#3598 = DEFINITIONAL_REPRESENTATION('',(#3599),#3603);+#3599 = LINE('',#3600,#3601);+#3600 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#3601 = VECTOR('',#3602,1.);+#3602 = DIRECTION('',(0.,1.));+#3603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3604 = ORIENTED_EDGE('',*,*,#3605,.T.);+#3605 = EDGE_CURVE('',#3583,#3606,#3608,.T.);+#3606 = VERTEX_POINT('',#3607);+#3607 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3608 = SURFACE_CURVE('',#3609,(#3613,#3620),.PCURVE_S1.); #3609 = LINE('',#3610,#3611);-#3610 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3610 = CARTESIAN_POINT('',(-2.2,0.175,0.445)); #3611 = VECTOR('',#3612,1.);-#3612 = DIRECTION('',(0.,1.));-#3613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3614 = PCURVE('',#3615,#3620);-#3615 = PLANE('',#3616);-#3616 = AXIS2_PLACEMENT_3D('',#3617,#3618,#3619);-#3617 = CARTESIAN_POINT('',(-3.205,0.325,0.));-#3618 = DIRECTION('',(-0.,0.,1.));-#3619 = DIRECTION('',(1.,0.,0.));-#3620 = DEFINITIONAL_REPRESENTATION('',(#3621),#3625);-#3621 = LINE('',#3622,#3623);-#3622 = CARTESIAN_POINT('',(0.,-0.15));-#3623 = VECTOR('',#3624,1.);-#3624 = DIRECTION('',(1.,0.));-#3625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3626 = ORIENTED_EDGE('',*,*,#3627,.T.);-#3627 = EDGE_CURVE('',#3600,#3628,#3630,.T.);-#3628 = VERTEX_POINT('',#3629);-#3629 = CARTESIAN_POINT('',(-2.2,0.175,0.445));-#3630 = SURFACE_CURVE('',#3631,(#3635,#3642),.PCURVE_S1.);-#3631 = LINE('',#3632,#3633);-#3632 = CARTESIAN_POINT('',(-2.4875,0.175,0.));-#3633 = VECTOR('',#3634,1.);-#3634 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3635 = PCURVE('',#3325,#3636);-#3636 = DEFINITIONAL_REPRESENTATION('',(#3637),#3641);-#3637 = LINE('',#3638,#3639);-#3638 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#3639 = VECTOR('',#3640,1.);-#3640 = DIRECTION('',(-0.839949759337,0.542664170358));-#3641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3642 = PCURVE('',#3643,#3648);-#3643 = PLANE('',#3644);-#3644 = AXIS2_PLACEMENT_3D('',#3645,#3646,#3647);-#3645 = CARTESIAN_POINT('',(-2.4875,0.325,0.));-#3646 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#3647 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3648 = DEFINITIONAL_REPRESENTATION('',(#3649),#3653);-#3649 = LINE('',#3650,#3651);-#3650 = CARTESIAN_POINT('',(0.,-0.15));-#3651 = VECTOR('',#3652,1.);-#3652 = DIRECTION('',(1.,0.));-#3653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3654 = ORIENTED_EDGE('',*,*,#3655,.T.);-#3655 = EDGE_CURVE('',#3628,#3395,#3656,.T.);+#3612 = DIRECTION('',(1.,0.,0.));+#3613 = PCURVE('',#3546,#3614);+#3614 = DEFINITIONAL_REPRESENTATION('',(#3615),#3619);+#3615 = LINE('',#3616,#3617);+#3616 = CARTESIAN_POINT('',(0.,-0.15));+#3617 = VECTOR('',#3618,1.);+#3618 = DIRECTION('',(1.,0.));+#3619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3620 = PCURVE('',#3325,#3621);+#3621 = DEFINITIONAL_REPRESENTATION('',(#3622),#3626);+#3622 = LINE('',#3623,#3624);+#3623 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3624 = VECTOR('',#3625,1.);+#3625 = DIRECTION('',(0.,1.));+#3626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3627 = ORIENTED_EDGE('',*,*,#3628,.T.);+#3628 = EDGE_CURVE('',#3606,#3531,#3629,.T.);+#3629 = SURFACE_CURVE('',#3630,(#3634,#3641),.PCURVE_S1.);+#3630 = LINE('',#3631,#3632);+#3631 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3632 = VECTOR('',#3633,1.);+#3633 = DIRECTION('',(0.,1.,0.));+#3634 = PCURVE('',#3546,#3635);+#3635 = DEFINITIONAL_REPRESENTATION('',(#3636),#3640);+#3636 = LINE('',#3637,#3638);+#3637 = CARTESIAN_POINT('',(5.E-02,-0.15));+#3638 = VECTOR('',#3639,1.);+#3639 = DIRECTION('',(0.,1.));+#3640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3641 = PCURVE('',#3297,#3642);+#3642 = DEFINITIONAL_REPRESENTATION('',(#3643),#3647);+#3643 = LINE('',#3644,#3645);+#3644 = CARTESIAN_POINT('',(0.,-0.15));+#3645 = VECTOR('',#3646,1.);+#3646 = DIRECTION('',(0.,1.));+#3647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3648 = ORIENTED_EDGE('',*,*,#3530,.F.);+#3649 = ADVANCED_FACE('',(#3650),#3518,.F.);+#3650 = FACE_BOUND('',#3651,.F.);+#3651 = EDGE_LOOP('',(#3652,#3675,#3676,#3677));+#3652 = ORIENTED_EDGE('',*,*,#3653,.T.);+#3653 = EDGE_CURVE('',#3654,#3583,#3656,.T.);+#3654 = VERTEX_POINT('',#3655);+#3655 = CARTESIAN_POINT('',(-2.4875,0.175,0.)); #3656 = SURFACE_CURVE('',#3657,(#3661,#3668),.PCURVE_S1.); #3657 = LINE('',#3658,#3659);-#3658 = CARTESIAN_POINT('',(-2.2,0.175,0.445));+#3658 = CARTESIAN_POINT('',(-2.4875,0.175,0.)); #3659 = VECTOR('',#3660,1.);-#3660 = DIRECTION('',(1.,0.,0.));-#3661 = PCURVE('',#3325,#3662);+#3660 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#3661 = PCURVE('',#3518,#3662); #3662 = DEFINITIONAL_REPRESENTATION('',(#3663),#3667); #3663 = LINE('',#3664,#3665);-#3664 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#3664 = CARTESIAN_POINT('',(0.,-0.15)); #3665 = VECTOR('',#3666,1.);-#3666 = DIRECTION('',(0.,1.));+#3666 = DIRECTION('',(1.,0.)); #3667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3668 = PCURVE('',#3412,#3669);+#3668 = PCURVE('',#3325,#3669); #3669 = DEFINITIONAL_REPRESENTATION('',(#3670),#3674); #3670 = LINE('',#3671,#3672);-#3671 = CARTESIAN_POINT('',(0.,-0.15));+#3671 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #3672 = VECTOR('',#3673,1.);-#3673 = DIRECTION('',(1.,0.));+#3673 = DIRECTION('',(-0.839949759337,0.542664170358)); #3674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3675 = ORIENTED_EDGE('',*,*,#3424,.T.);-#3676 = ADVANCED_FACE('',(#3677),#3412,.F.);-#3677 = FACE_BOUND('',#3678,.F.);-#3678 = EDGE_LOOP('',(#3679,#3702,#3703,#3704));-#3679 = ORIENTED_EDGE('',*,*,#3680,.F.);-#3680 = EDGE_CURVE('',#3628,#3681,#3683,.T.);-#3681 = VERTEX_POINT('',#3682);-#3682 = CARTESIAN_POINT('',(-2.2,0.475,0.445));-#3683 = SURFACE_CURVE('',#3684,(#3688,#3695),.PCURVE_S1.);-#3684 = LINE('',#3685,#3686);-#3685 = CARTESIAN_POINT('',(-2.2,0.175,0.445));-#3686 = VECTOR('',#3687,1.);-#3687 = DIRECTION('',(0.,1.,0.));-#3688 = PCURVE('',#3412,#3689);-#3689 = DEFINITIONAL_REPRESENTATION('',(#3690),#3694);-#3690 = LINE('',#3691,#3692);-#3691 = CARTESIAN_POINT('',(0.,-0.15));-#3692 = VECTOR('',#3693,1.);-#3693 = DIRECTION('',(0.,1.));-#3694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3695 = PCURVE('',#3643,#3696);-#3696 = DEFINITIONAL_REPRESENTATION('',(#3697),#3701);-#3697 = LINE('',#3698,#3699);-#3698 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#3699 = VECTOR('',#3700,1.);-#3700 = DIRECTION('',(0.,1.));-#3701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3702 = ORIENTED_EDGE('',*,*,#3655,.T.);-#3703 = ORIENTED_EDGE('',*,*,#3394,.T.);-#3704 = ORIENTED_EDGE('',*,*,#3705,.F.);-#3705 = EDGE_CURVE('',#3681,#3397,#3706,.T.);-#3706 = SURFACE_CURVE('',#3707,(#3711,#3718),.PCURVE_S1.);-#3707 = LINE('',#3708,#3709);-#3708 = CARTESIAN_POINT('',(-2.2,0.475,0.445));-#3709 = VECTOR('',#3710,1.);-#3710 = DIRECTION('',(1.,0.,0.));-#3711 = PCURVE('',#3412,#3712);-#3712 = DEFINITIONAL_REPRESENTATION('',(#3713),#3717);-#3713 = LINE('',#3714,#3715);-#3714 = CARTESIAN_POINT('',(0.,0.15));-#3715 = VECTOR('',#3716,1.);-#3716 = DIRECTION('',(1.,0.));-#3717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3718 = PCURVE('',#3379,#3719);-#3719 = DEFINITIONAL_REPRESENTATION('',(#3720),#3724);-#3720 = LINE('',#3721,#3722);-#3721 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#3722 = VECTOR('',#3723,1.);-#3723 = DIRECTION('',(0.,1.));-#3724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3725 = ADVANCED_FACE('',(#3726),#3509,.F.);-#3726 = FACE_BOUND('',#3727,.F.);-#3727 = EDGE_LOOP('',(#3728,#3729,#3752,#3773));-#3728 = ORIENTED_EDGE('',*,*,#3548,.T.);-#3729 = ORIENTED_EDGE('',*,*,#3730,.F.);-#3730 = EDGE_CURVE('',#3731,#3549,#3733,.T.);-#3731 = VERTEX_POINT('',#3732);-#3732 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#3733 = SURFACE_CURVE('',#3734,(#3738,#3745),.PCURVE_S1.);-#3734 = LINE('',#3735,#3736);-#3735 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#3736 = VECTOR('',#3737,1.);-#3737 = DIRECTION('',(0.,-1.,0.));-#3738 = PCURVE('',#3509,#3739);-#3739 = DEFINITIONAL_REPRESENTATION('',(#3740),#3744);-#3740 = LINE('',#3741,#3742);-#3741 = CARTESIAN_POINT('',(0.5675,0.15));-#3742 = VECTOR('',#3743,1.);-#3743 = DIRECTION('',(0.,-1.));-#3744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3745 = PCURVE('',#3587,#3746);-#3746 = DEFINITIONAL_REPRESENTATION('',(#3747),#3751);-#3747 = LINE('',#3748,#3749);-#3748 = CARTESIAN_POINT('',(0.,0.15));-#3749 = VECTOR('',#3750,1.);-#3750 = DIRECTION('',(0.,-1.));-#3751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3752 = ORIENTED_EDGE('',*,*,#3753,.F.);-#3753 = EDGE_CURVE('',#3494,#3731,#3754,.T.);+#3675 = ORIENTED_EDGE('',*,*,#3582,.T.);+#3676 = ORIENTED_EDGE('',*,*,#3502,.F.);+#3677 = ORIENTED_EDGE('',*,*,#3678,.T.);+#3678 = EDGE_CURVE('',#3475,#3654,#3679,.T.);+#3679 = SURFACE_CURVE('',#3680,(#3684,#3691),.PCURVE_S1.);+#3680 = LINE('',#3681,#3682);+#3681 = CARTESIAN_POINT('',(-2.4875,0.475,0.));+#3682 = VECTOR('',#3683,1.);+#3683 = DIRECTION('',(0.,-1.,0.));+#3684 = PCURVE('',#3518,#3685);+#3685 = DEFINITIONAL_REPRESENTATION('',(#3686),#3690);+#3686 = LINE('',#3687,#3688);+#3687 = CARTESIAN_POINT('',(0.,0.15));+#3688 = VECTOR('',#3689,1.);+#3689 = DIRECTION('',(0.,-1.));+#3690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3691 = PCURVE('',#3490,#3692);+#3692 = DEFINITIONAL_REPRESENTATION('',(#3693),#3697);+#3693 = LINE('',#3694,#3695);+#3694 = CARTESIAN_POINT('',(0.7175,0.15));+#3695 = VECTOR('',#3696,1.);+#3696 = DIRECTION('',(0.,-1.));+#3697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3698 = ADVANCED_FACE('',(#3699),#3490,.F.);+#3699 = FACE_BOUND('',#3700,.F.);+#3700 = EDGE_LOOP('',(#3701,#3724,#3725,#3726));+#3701 = ORIENTED_EDGE('',*,*,#3702,.T.);+#3702 = EDGE_CURVE('',#3703,#3654,#3705,.T.);+#3703 = VERTEX_POINT('',#3704);+#3704 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#3705 = SURFACE_CURVE('',#3706,(#3710,#3717),.PCURVE_S1.);+#3706 = LINE('',#3707,#3708);+#3707 = CARTESIAN_POINT('',(-3.205,0.175,0.));+#3708 = VECTOR('',#3709,1.);+#3709 = DIRECTION('',(1.,0.,0.));+#3710 = PCURVE('',#3490,#3711);+#3711 = DEFINITIONAL_REPRESENTATION('',(#3712),#3716);+#3712 = LINE('',#3713,#3714);+#3713 = CARTESIAN_POINT('',(0.,-0.15));+#3714 = VECTOR('',#3715,1.);+#3715 = DIRECTION('',(1.,0.));+#3716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3717 = PCURVE('',#3325,#3718);+#3718 = DEFINITIONAL_REPRESENTATION('',(#3719),#3723);+#3719 = LINE('',#3720,#3721);+#3720 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#3721 = VECTOR('',#3722,1.);+#3722 = DIRECTION('',(0.,1.));+#3723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3724 = ORIENTED_EDGE('',*,*,#3678,.F.);+#3725 = ORIENTED_EDGE('',*,*,#3474,.F.);+#3726 = ORIENTED_EDGE('',*,*,#3727,.T.);+#3727 = EDGE_CURVE('',#3447,#3703,#3728,.T.);+#3728 = SURFACE_CURVE('',#3729,(#3733,#3740),.PCURVE_S1.);+#3729 = LINE('',#3730,#3731);+#3730 = CARTESIAN_POINT('',(-3.205,0.475,0.));+#3731 = VECTOR('',#3732,1.);+#3732 = DIRECTION('',(0.,-1.,0.));+#3733 = PCURVE('',#3490,#3734);+#3734 = DEFINITIONAL_REPRESENTATION('',(#3735),#3739);+#3735 = LINE('',#3736,#3737);+#3736 = CARTESIAN_POINT('',(0.,0.15));+#3737 = VECTOR('',#3738,1.);+#3738 = DIRECTION('',(0.,-1.));+#3739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3740 = PCURVE('',#3462,#3741);+#3741 = DEFINITIONAL_REPRESENTATION('',(#3742),#3746);+#3742 = LINE('',#3743,#3744);+#3743 = CARTESIAN_POINT('',(0.15,0.15));+#3744 = VECTOR('',#3745,1.);+#3745 = DIRECTION('',(0.,-1.));+#3746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3747 = ADVANCED_FACE('',(#3748),#3462,.F.);+#3748 = FACE_BOUND('',#3749,.F.);+#3749 = EDGE_LOOP('',(#3750,#3773,#3774,#3775));+#3750 = ORIENTED_EDGE('',*,*,#3751,.T.);+#3751 = EDGE_CURVE('',#3752,#3703,#3754,.T.);+#3752 = VERTEX_POINT('',#3753);+#3753 = CARTESIAN_POINT('',(-3.205,0.175,0.15)); #3754 = SURFACE_CURVE('',#3755,(#3759,#3766),.PCURVE_S1.); #3755 = LINE('',#3756,#3757);-#3756 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3756 = CARTESIAN_POINT('',(-3.205,0.175,0.15)); #3757 = VECTOR('',#3758,1.);-#3758 = DIRECTION('',(-1.,0.,0.));-#3759 = PCURVE('',#3509,#3760);+#3758 = DIRECTION('',(0.,0.,-1.));+#3759 = PCURVE('',#3462,#3760); #3760 = DEFINITIONAL_REPRESENTATION('',(#3761),#3765); #3761 = LINE('',#3762,#3763);-#3762 = CARTESIAN_POINT('',(0.,0.15));+#3762 = CARTESIAN_POINT('',(0.,-0.15)); #3763 = VECTOR('',#3764,1.); #3764 = DIRECTION('',(1.,0.)); #3765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3766 = PCURVE('',#3379,#3767);+#3766 = PCURVE('',#3325,#3767); #3767 = DEFINITIONAL_REPRESENTATION('',(#3768),#3772); #3768 = LINE('',#3769,#3770);-#3769 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#3769 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #3770 = VECTOR('',#3771,1.);-#3771 = DIRECTION('',(0.,-1.));+#3771 = DIRECTION('',(1.,0.)); #3772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3773 = ORIENTED_EDGE('',*,*,#3493,.T.);-#3774 = ADVANCED_FACE('',(#3775),#3379,.F.);-#3775 = FACE_BOUND('',#3776,.F.);-#3776 = EDGE_LOOP('',(#3777,#3778,#3779,#3780,#3803,#3826,#3847,#3848));-#3777 = ORIENTED_EDGE('',*,*,#3365,.T.);-#3778 = ORIENTED_EDGE('',*,*,#3521,.T.);-#3779 = ORIENTED_EDGE('',*,*,#3753,.T.);-#3780 = ORIENTED_EDGE('',*,*,#3781,.T.);-#3781 = EDGE_CURVE('',#3731,#3782,#3784,.T.);-#3782 = VERTEX_POINT('',#3783);-#3783 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#3784 = SURFACE_CURVE('',#3785,(#3789,#3796),.PCURVE_S1.);-#3785 = LINE('',#3786,#3787);-#3786 = CARTESIAN_POINT('',(-3.205,0.475,0.15));-#3787 = VECTOR('',#3788,1.);-#3788 = DIRECTION('',(0.,0.,-1.));-#3789 = PCURVE('',#3379,#3790);+#3773 = ORIENTED_EDGE('',*,*,#3727,.F.);+#3774 = ORIENTED_EDGE('',*,*,#3446,.F.);+#3775 = ORIENTED_EDGE('',*,*,#3776,.T.);+#3776 = EDGE_CURVE('',#3419,#3752,#3777,.T.);+#3777 = SURFACE_CURVE('',#3778,(#3782,#3789),.PCURVE_S1.);+#3778 = LINE('',#3779,#3780);+#3779 = CARTESIAN_POINT('',(-3.205,0.475,0.15));+#3780 = VECTOR('',#3781,1.);+#3781 = DIRECTION('',(0.,-1.,0.));+#3782 = PCURVE('',#3462,#3783);+#3783 = DEFINITIONAL_REPRESENTATION('',(#3784),#3788);+#3784 = LINE('',#3785,#3786);+#3785 = CARTESIAN_POINT('',(0.,0.15));+#3786 = VECTOR('',#3787,1.);+#3787 = DIRECTION('',(0.,-1.));+#3788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3789 = PCURVE('',#3434,#3790); #3790 = DEFINITIONAL_REPRESENTATION('',(#3791),#3795); #3791 = LINE('',#3792,#3793);-#3792 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#3792 = CARTESIAN_POINT('',(0.5675,0.15)); #3793 = VECTOR('',#3794,1.);-#3794 = DIRECTION('',(1.,0.));+#3794 = DIRECTION('',(0.,-1.)); #3795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3796 = PCURVE('',#3587,#3797);-#3797 = DEFINITIONAL_REPRESENTATION('',(#3798),#3802);-#3798 = LINE('',#3799,#3800);-#3799 = CARTESIAN_POINT('',(0.,0.15));-#3800 = VECTOR('',#3801,1.);-#3801 = DIRECTION('',(1.,0.));-#3802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3803 = ORIENTED_EDGE('',*,*,#3804,.T.);-#3804 = EDGE_CURVE('',#3782,#3805,#3807,.T.);-#3805 = VERTEX_POINT('',#3806);-#3806 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#3807 = SURFACE_CURVE('',#3808,(#3812,#3819),.PCURVE_S1.);-#3808 = LINE('',#3809,#3810);-#3809 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#3810 = VECTOR('',#3811,1.);-#3811 = DIRECTION('',(1.,0.,0.));-#3812 = PCURVE('',#3379,#3813);-#3813 = DEFINITIONAL_REPRESENTATION('',(#3814),#3818);-#3814 = LINE('',#3815,#3816);-#3815 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#3816 = VECTOR('',#3817,1.);-#3817 = DIRECTION('',(0.,1.));-#3818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3819 = PCURVE('',#3615,#3820);-#3820 = DEFINITIONAL_REPRESENTATION('',(#3821),#3825);-#3821 = LINE('',#3822,#3823);-#3822 = CARTESIAN_POINT('',(0.,0.15));-#3823 = VECTOR('',#3824,1.);-#3824 = DIRECTION('',(1.,0.));-#3825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3826 = ORIENTED_EDGE('',*,*,#3827,.T.);-#3827 = EDGE_CURVE('',#3805,#3681,#3828,.T.);-#3828 = SURFACE_CURVE('',#3829,(#3833,#3840),.PCURVE_S1.);-#3829 = LINE('',#3830,#3831);-#3830 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#3831 = VECTOR('',#3832,1.);-#3832 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#3833 = PCURVE('',#3379,#3834);-#3834 = DEFINITIONAL_REPRESENTATION('',(#3835),#3839);-#3835 = LINE('',#3836,#3837);-#3836 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#3837 = VECTOR('',#3838,1.);-#3838 = DIRECTION('',(-0.839949759337,0.542664170358));-#3839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3840 = PCURVE('',#3643,#3841);-#3841 = DEFINITIONAL_REPRESENTATION('',(#3842),#3846);-#3842 = LINE('',#3843,#3844);-#3843 = CARTESIAN_POINT('',(0.,0.15));-#3844 = VECTOR('',#3845,1.);-#3845 = DIRECTION('',(1.,0.));-#3846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3847 = ORIENTED_EDGE('',*,*,#3705,.T.);-#3848 = ORIENTED_EDGE('',*,*,#3446,.T.);-#3849 = ADVANCED_FACE('',(#3850),#3587,.F.);-#3850 = FACE_BOUND('',#3851,.F.);-#3851 = EDGE_LOOP('',(#3852,#3853,#3874,#3875));-#3852 = ORIENTED_EDGE('',*,*,#3571,.T.);-#3853 = ORIENTED_EDGE('',*,*,#3854,.F.);-#3854 = EDGE_CURVE('',#3782,#3572,#3855,.T.);-#3855 = SURFACE_CURVE('',#3856,(#3860,#3867),.PCURVE_S1.);-#3856 = LINE('',#3857,#3858);-#3857 = CARTESIAN_POINT('',(-3.205,0.475,0.));-#3858 = VECTOR('',#3859,1.);-#3859 = DIRECTION('',(0.,-1.,0.));-#3860 = PCURVE('',#3587,#3861);-#3861 = DEFINITIONAL_REPRESENTATION('',(#3862),#3866);-#3862 = LINE('',#3863,#3864);-#3863 = CARTESIAN_POINT('',(0.15,0.15));-#3864 = VECTOR('',#3865,1.);-#3865 = DIRECTION('',(0.,-1.));-#3866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3867 = PCURVE('',#3615,#3868);-#3868 = DEFINITIONAL_REPRESENTATION('',(#3869),#3873);-#3869 = LINE('',#3870,#3871);-#3870 = CARTESIAN_POINT('',(0.,0.15));-#3871 = VECTOR('',#3872,1.);-#3872 = DIRECTION('',(0.,-1.));-#3873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3874 = ORIENTED_EDGE('',*,*,#3781,.F.);-#3875 = ORIENTED_EDGE('',*,*,#3730,.T.);-#3876 = ADVANCED_FACE('',(#3877),#3615,.F.);-#3877 = FACE_BOUND('',#3878,.F.);-#3878 = EDGE_LOOP('',(#3879,#3880,#3901,#3902));-#3879 = ORIENTED_EDGE('',*,*,#3599,.T.);-#3880 = ORIENTED_EDGE('',*,*,#3881,.F.);-#3881 = EDGE_CURVE('',#3805,#3600,#3882,.T.);-#3882 = SURFACE_CURVE('',#3883,(#3887,#3894),.PCURVE_S1.);-#3883 = LINE('',#3884,#3885);-#3884 = CARTESIAN_POINT('',(-2.4875,0.475,0.));-#3885 = VECTOR('',#3886,1.);-#3886 = DIRECTION('',(0.,-1.,0.));-#3887 = PCURVE('',#3615,#3888);-#3888 = DEFINITIONAL_REPRESENTATION('',(#3889),#3893);-#3889 = LINE('',#3890,#3891);-#3890 = CARTESIAN_POINT('',(0.7175,0.15));-#3891 = VECTOR('',#3892,1.);-#3892 = DIRECTION('',(0.,-1.));-#3893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3894 = PCURVE('',#3643,#3895);-#3895 = DEFINITIONAL_REPRESENTATION('',(#3896),#3900);-#3896 = LINE('',#3897,#3898);-#3897 = CARTESIAN_POINT('',(0.,0.15));-#3898 = VECTOR('',#3899,1.);-#3899 = DIRECTION('',(0.,-1.));-#3900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3901 = ORIENTED_EDGE('',*,*,#3804,.F.);-#3902 = ORIENTED_EDGE('',*,*,#3854,.T.);-#3903 = ADVANCED_FACE('',(#3904),#3643,.F.);+#3796 = ADVANCED_FACE('',(#3797),#3434,.F.);+#3797 = FACE_BOUND('',#3798,.F.);+#3798 = EDGE_LOOP('',(#3799,#3822,#3823,#3824));+#3799 = ORIENTED_EDGE('',*,*,#3800,.T.);+#3800 = EDGE_CURVE('',#3801,#3752,#3803,.T.);+#3801 = VERTEX_POINT('',#3802);+#3802 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#3803 = SURFACE_CURVE('',#3804,(#3808,#3815),.PCURVE_S1.);+#3804 = LINE('',#3805,#3806);+#3805 = CARTESIAN_POINT('',(-2.6375,0.175,0.15));+#3806 = VECTOR('',#3807,1.);+#3807 = DIRECTION('',(-1.,0.,0.));+#3808 = PCURVE('',#3434,#3809);+#3809 = DEFINITIONAL_REPRESENTATION('',(#3810),#3814);+#3810 = LINE('',#3811,#3812);+#3811 = CARTESIAN_POINT('',(0.,-0.15));+#3812 = VECTOR('',#3813,1.);+#3813 = DIRECTION('',(1.,0.));+#3814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3815 = PCURVE('',#3325,#3816);+#3816 = DEFINITIONAL_REPRESENTATION('',(#3817),#3821);+#3817 = LINE('',#3818,#3819);+#3818 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#3819 = VECTOR('',#3820,1.);+#3820 = DIRECTION('',(0.,-1.));+#3821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3822 = ORIENTED_EDGE('',*,*,#3776,.F.);+#3823 = ORIENTED_EDGE('',*,*,#3418,.F.);+#3824 = ORIENTED_EDGE('',*,*,#3825,.T.);+#3825 = EDGE_CURVE('',#3396,#3801,#3826,.T.);+#3826 = SURFACE_CURVE('',#3827,(#3831,#3838),.PCURVE_S1.);+#3827 = LINE('',#3828,#3829);+#3828 = CARTESIAN_POINT('',(-2.6375,0.475,0.15));+#3829 = VECTOR('',#3830,1.);+#3830 = DIRECTION('',(0.,-1.,0.));+#3831 = PCURVE('',#3434,#3832);+#3832 = DEFINITIONAL_REPRESENTATION('',(#3833),#3837);+#3833 = LINE('',#3834,#3835);+#3834 = CARTESIAN_POINT('',(0.,0.15));+#3835 = VECTOR('',#3836,1.);+#3836 = DIRECTION('',(0.,-1.));+#3837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3838 = PCURVE('',#3353,#3839);+#3839 = DEFINITIONAL_REPRESENTATION('',(#3840),#3844);+#3840 = LINE('',#3841,#3842);+#3841 = CARTESIAN_POINT('',(0.529793591883,0.15));+#3842 = VECTOR('',#3843,1.);+#3843 = DIRECTION('',(-0.,-1.));+#3844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3845 = ADVANCED_FACE('',(#3846),#3353,.F.);+#3846 = FACE_BOUND('',#3847,.F.);+#3847 = EDGE_LOOP('',(#3848,#3869,#3870,#3871));+#3848 = ORIENTED_EDGE('',*,*,#3849,.T.);+#3849 = EDGE_CURVE('',#3310,#3801,#3850,.T.);+#3850 = SURFACE_CURVE('',#3851,(#3855,#3862),.PCURVE_S1.);+#3851 = LINE('',#3852,#3853);+#3852 = CARTESIAN_POINT('',(-2.35,0.175,0.595));+#3853 = VECTOR('',#3854,1.);+#3854 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#3855 = PCURVE('',#3353,#3856);+#3856 = DEFINITIONAL_REPRESENTATION('',(#3857),#3861);+#3857 = LINE('',#3858,#3859);+#3858 = CARTESIAN_POINT('',(-0.,-0.15));+#3859 = VECTOR('',#3860,1.);+#3860 = DIRECTION('',(1.,0.));+#3861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3862 = PCURVE('',#3325,#3863);+#3863 = DEFINITIONAL_REPRESENTATION('',(#3864),#3868);+#3864 = LINE('',#3865,#3866);+#3865 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#3866 = VECTOR('',#3867,1.);+#3867 = DIRECTION('',(0.839949759337,-0.542664170358));+#3868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3869 = ORIENTED_EDGE('',*,*,#3825,.F.);+#3870 = ORIENTED_EDGE('',*,*,#3395,.F.);+#3871 = ORIENTED_EDGE('',*,*,#3337,.T.);+#3872 = ADVANCED_FACE('',(#3873),#3325,.T.);+#3873 = FACE_BOUND('',#3874,.T.);+#3874 = EDGE_LOOP('',(#3875,#3876,#3877,#3878,#3879,#3880,#3881,#3882));+#3875 = ORIENTED_EDGE('',*,*,#3309,.T.);+#3876 = ORIENTED_EDGE('',*,*,#3849,.T.);+#3877 = ORIENTED_EDGE('',*,*,#3800,.T.);+#3878 = ORIENTED_EDGE('',*,*,#3751,.T.);+#3879 = ORIENTED_EDGE('',*,*,#3702,.T.);+#3880 = ORIENTED_EDGE('',*,*,#3653,.T.);+#3881 = ORIENTED_EDGE('',*,*,#3605,.T.);+#3882 = ORIENTED_EDGE('',*,*,#3883,.T.);+#3883 = EDGE_CURVE('',#3606,#3275,#3884,.T.);+#3884 = SURFACE_CURVE('',#3885,(#3889,#3896),.PCURVE_S1.);+#3885 = LINE('',#3886,#3887);+#3886 = CARTESIAN_POINT('',(-2.15,0.175,0.445));+#3887 = VECTOR('',#3888,1.);+#3888 = DIRECTION('',(0.,0.,1.));+#3889 = PCURVE('',#3325,#3890);+#3890 = DEFINITIONAL_REPRESENTATION('',(#3891),#3895);+#3891 = LINE('',#3892,#3893);+#3892 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#3893 = VECTOR('',#3894,1.);+#3894 = DIRECTION('',(-1.,0.));+#3895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3896 = PCURVE('',#3297,#3897);+#3897 = DEFINITIONAL_REPRESENTATION('',(#3898),#3902);+#3898 = LINE('',#3899,#3900);+#3899 = CARTESIAN_POINT('',(0.,-0.15));+#3900 = VECTOR('',#3901,1.);+#3901 = DIRECTION('',(1.,0.));+#3902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3903 = ADVANCED_FACE('',(#3904),#3297,.F.); #3904 = FACE_BOUND('',#3905,.F.); #3905 = EDGE_LOOP('',(#3906,#3907,#3908,#3909));-#3906 = ORIENTED_EDGE('',*,*,#3627,.T.);-#3907 = ORIENTED_EDGE('',*,*,#3680,.T.);-#3908 = ORIENTED_EDGE('',*,*,#3827,.F.);-#3909 = ORIENTED_EDGE('',*,*,#3881,.T.);+#3906 = ORIENTED_EDGE('',*,*,#3628,.F.);+#3907 = ORIENTED_EDGE('',*,*,#3883,.T.);+#3908 = ORIENTED_EDGE('',*,*,#3274,.T.);+#3909 = ORIENTED_EDGE('',*,*,#3558,.F.); #3910 = MANIFOLD_SOLID_BREP('',#3911);-#3911 = CLOSED_SHELL('',(#3912,#4032,#4108,#4184,#4318,#4367,#4416,#4491- ,#4518,#4545));+#3911 = CLOSED_SHELL('',(#3912,#4032,#4220,#4291,#4340,#4389,#4438,#4487+ ,#4514,#4545)); #3912 = ADVANCED_FACE('',(#3913),#3927,.F.); #3913 = FACE_BOUND('',#3914,.F.); #3914 = EDGE_LOOP('',(#3915,#3950,#3978,#4006));@@ -4656,609 +4656,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #4031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4032 = ADVANCED_FACE('',(#4033),#3939,.F.);+#4032 = ADVANCED_FACE('',(#4033),#4021,.F.); #4033 = FACE_BOUND('',#4034,.F.);-#4034 = EDGE_LOOP('',(#4035,#4065,#4086,#4087));-#4035 = ORIENTED_EDGE('',*,*,#4036,.F.);-#4036 = EDGE_CURVE('',#4037,#4039,#4041,.T.);-#4037 = VERTEX_POINT('',#4038);-#4038 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#4039 = VERTEX_POINT('',#4040);-#4040 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));-#4041 = SURFACE_CURVE('',#4042,(#4046,#4053),.PCURVE_S1.);-#4042 = LINE('',#4043,#4044);-#4043 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#4044 = VECTOR('',#4045,1.);-#4045 = DIRECTION('',(0.,1.,0.));-#4046 = PCURVE('',#3939,#4047);-#4047 = DEFINITIONAL_REPRESENTATION('',(#4048),#4052);-#4048 = LINE('',#4049,#4050);-#4049 = CARTESIAN_POINT('',(0.,-0.15));-#4050 = VECTOR('',#4051,1.);-#4051 = DIRECTION('',(0.,1.));-#4052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4053 = PCURVE('',#4054,#4059);-#4054 = PLANE('',#4055);-#4055 = AXIS2_PLACEMENT_3D('',#4056,#4057,#4058);-#4056 = CARTESIAN_POINT('',(-2.2,-0.325,0.445));-#4057 = DIRECTION('',(-0.,0.,1.));-#4058 = DIRECTION('',(1.,0.,0.));-#4059 = DEFINITIONAL_REPRESENTATION('',(#4060),#4064);-#4060 = LINE('',#4061,#4062);-#4061 = CARTESIAN_POINT('',(5.E-02,-0.15));-#4062 = VECTOR('',#4063,1.);-#4063 = DIRECTION('',(0.,1.));-#4064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4065 = ORIENTED_EDGE('',*,*,#4066,.T.);-#4066 = EDGE_CURVE('',#4037,#3917,#4067,.T.);-#4067 = SURFACE_CURVE('',#4068,(#4072,#4079),.PCURVE_S1.);-#4068 = LINE('',#4069,#4070);-#4069 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));-#4070 = VECTOR('',#4071,1.);-#4071 = DIRECTION('',(0.,0.,1.));-#4072 = PCURVE('',#3939,#4073);-#4073 = DEFINITIONAL_REPRESENTATION('',(#4074),#4078);-#4074 = LINE('',#4075,#4076);-#4075 = CARTESIAN_POINT('',(0.,-0.15));-#4076 = VECTOR('',#4077,1.);-#4077 = DIRECTION('',(1.,0.));-#4078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4079 = PCURVE('',#3967,#4080);-#4080 = DEFINITIONAL_REPRESENTATION('',(#4081),#4085);-#4081 = LINE('',#4082,#4083);-#4082 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#4083 = VECTOR('',#4084,1.);-#4084 = DIRECTION('',(-1.,0.));-#4085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4086 = ORIENTED_EDGE('',*,*,#3916,.T.);-#4087 = ORIENTED_EDGE('',*,*,#4088,.F.);-#4088 = EDGE_CURVE('',#4039,#3919,#4089,.T.);-#4089 = SURFACE_CURVE('',#4090,(#4094,#4101),.PCURVE_S1.);-#4090 = LINE('',#4091,#4092);-#4091 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));-#4092 = VECTOR('',#4093,1.);-#4093 = DIRECTION('',(0.,0.,1.));-#4094 = PCURVE('',#3939,#4095);-#4095 = DEFINITIONAL_REPRESENTATION('',(#4096),#4100);-#4096 = LINE('',#4097,#4098);-#4097 = CARTESIAN_POINT('',(0.,0.15));-#4098 = VECTOR('',#4099,1.);-#4099 = DIRECTION('',(1.,0.));-#4100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4101 = PCURVE('',#4021,#4102);-#4102 = DEFINITIONAL_REPRESENTATION('',(#4103),#4107);-#4103 = LINE('',#4104,#4105);-#4104 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#4105 = VECTOR('',#4106,1.);-#4106 = DIRECTION('',(-1.,0.));-#4107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4108 = ADVANCED_FACE('',(#4109),#3995,.F.);-#4109 = FACE_BOUND('',#4110,.F.);-#4110 = EDGE_LOOP('',(#4111,#4134,#4162,#4183));-#4111 = ORIENTED_EDGE('',*,*,#4112,.T.);-#4112 = EDGE_CURVE('',#3952,#4113,#4115,.T.);-#4113 = VERTEX_POINT('',#4114);-#4114 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));-#4115 = SURFACE_CURVE('',#4116,(#4120,#4127),.PCURVE_S1.);-#4116 = LINE('',#4117,#4118);-#4117 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));-#4118 = VECTOR('',#4119,1.);-#4119 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#4120 = PCURVE('',#3995,#4121);-#4121 = DEFINITIONAL_REPRESENTATION('',(#4122),#4126);-#4122 = LINE('',#4123,#4124);-#4123 = CARTESIAN_POINT('',(-0.,-0.15));-#4124 = VECTOR('',#4125,1.);-#4125 = DIRECTION('',(1.,0.));-#4126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4127 = PCURVE('',#3967,#4128);-#4128 = DEFINITIONAL_REPRESENTATION('',(#4129),#4133);-#4129 = LINE('',#4130,#4131);-#4130 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#4131 = VECTOR('',#4132,1.);-#4132 = DIRECTION('',(0.839949759337,-0.542664170358));-#4133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4134 = ORIENTED_EDGE('',*,*,#4135,.F.);-#4135 = EDGE_CURVE('',#4136,#4113,#4138,.T.);-#4136 = VERTEX_POINT('',#4137);-#4137 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));-#4138 = SURFACE_CURVE('',#4139,(#4143,#4150),.PCURVE_S1.);-#4139 = LINE('',#4140,#4141);-#4140 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));-#4141 = VECTOR('',#4142,1.);-#4142 = DIRECTION('',(0.,-1.,0.));-#4143 = PCURVE('',#3995,#4144);-#4144 = DEFINITIONAL_REPRESENTATION('',(#4145),#4149);-#4145 = LINE('',#4146,#4147);-#4146 = CARTESIAN_POINT('',(0.529793591883,0.15));-#4147 = VECTOR('',#4148,1.);-#4148 = DIRECTION('',(-0.,-1.));-#4149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4150 = PCURVE('',#4151,#4156);-#4151 = PLANE('',#4152);-#4152 = AXIS2_PLACEMENT_3D('',#4153,#4154,#4155);-#4153 = CARTESIAN_POINT('',(-2.6375,-0.325,0.15));-#4154 = DIRECTION('',(-0.,-0.,-1.));-#4155 = DIRECTION('',(-1.,0.,0.));-#4156 = DEFINITIONAL_REPRESENTATION('',(#4157),#4161);-#4157 = LINE('',#4158,#4159);-#4158 = CARTESIAN_POINT('',(0.,0.15));-#4159 = VECTOR('',#4160,1.);-#4160 = DIRECTION('',(0.,-1.));-#4161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4162 = ORIENTED_EDGE('',*,*,#4163,.F.);-#4163 = EDGE_CURVE('',#3980,#4136,#4164,.T.);-#4164 = SURFACE_CURVE('',#4165,(#4169,#4176),.PCURVE_S1.);-#4165 = LINE('',#4166,#4167);-#4166 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));-#4167 = VECTOR('',#4168,1.);-#4168 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#4169 = PCURVE('',#3995,#4170);-#4170 = DEFINITIONAL_REPRESENTATION('',(#4171),#4175);-#4171 = LINE('',#4172,#4173);-#4172 = CARTESIAN_POINT('',(0.,0.15));-#4173 = VECTOR('',#4174,1.);-#4174 = DIRECTION('',(1.,0.));-#4175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4176 = PCURVE('',#4021,#4177);-#4177 = DEFINITIONAL_REPRESENTATION('',(#4178),#4182);-#4178 = LINE('',#4179,#4180);-#4179 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#4180 = VECTOR('',#4181,1.);-#4181 = DIRECTION('',(0.839949759337,-0.542664170358));-#4182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4183 = ORIENTED_EDGE('',*,*,#3979,.T.);-#4184 = ADVANCED_FACE('',(#4185),#3967,.T.);-#4185 = FACE_BOUND('',#4186,.T.);-#4186 = EDGE_LOOP('',(#4187,#4188,#4189,#4212,#4240,#4268,#4296,#4317));-#4187 = ORIENTED_EDGE('',*,*,#3951,.T.);-#4188 = ORIENTED_EDGE('',*,*,#4112,.T.);-#4189 = ORIENTED_EDGE('',*,*,#4190,.T.);-#4190 = EDGE_CURVE('',#4113,#4191,#4193,.T.);-#4191 = VERTEX_POINT('',#4192);-#4192 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));-#4193 = SURFACE_CURVE('',#4194,(#4198,#4205),.PCURVE_S1.);+#4034 = EDGE_LOOP('',(#4035,#4036,#4059,#4087,#4115,#4143,#4171,#4199));+#4035 = ORIENTED_EDGE('',*,*,#4007,.T.);+#4036 = ORIENTED_EDGE('',*,*,#4037,.T.);+#4037 = EDGE_CURVE('',#3980,#4038,#4040,.T.);+#4038 = VERTEX_POINT('',#4039);+#4039 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4040 = SURFACE_CURVE('',#4041,(#4045,#4052),.PCURVE_S1.);+#4041 = LINE('',#4042,#4043);+#4042 = CARTESIAN_POINT('',(-2.35,-0.175,0.595));+#4043 = VECTOR('',#4044,1.);+#4044 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4045 = PCURVE('',#4021,#4046);+#4046 = DEFINITIONAL_REPRESENTATION('',(#4047),#4051);+#4047 = LINE('',#4048,#4049);+#4048 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4049 = VECTOR('',#4050,1.);+#4050 = DIRECTION('',(0.839949759337,-0.542664170358));+#4051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4052 = PCURVE('',#3995,#4053);+#4053 = DEFINITIONAL_REPRESENTATION('',(#4054),#4058);+#4054 = LINE('',#4055,#4056);+#4055 = CARTESIAN_POINT('',(0.,0.15));+#4056 = VECTOR('',#4057,1.);+#4057 = DIRECTION('',(1.,0.));+#4058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4059 = ORIENTED_EDGE('',*,*,#4060,.T.);+#4060 = EDGE_CURVE('',#4038,#4061,#4063,.T.);+#4061 = VERTEX_POINT('',#4062);+#4062 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4063 = SURFACE_CURVE('',#4064,(#4068,#4075),.PCURVE_S1.);+#4064 = LINE('',#4065,#4066);+#4065 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4066 = VECTOR('',#4067,1.);+#4067 = DIRECTION('',(-1.,0.,0.));+#4068 = PCURVE('',#4021,#4069);+#4069 = DEFINITIONAL_REPRESENTATION('',(#4070),#4074);+#4070 = LINE('',#4071,#4072);+#4071 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#4072 = VECTOR('',#4073,1.);+#4073 = DIRECTION('',(0.,-1.));+#4074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4075 = PCURVE('',#4076,#4081);+#4076 = PLANE('',#4077);+#4077 = AXIS2_PLACEMENT_3D('',#4078,#4079,#4080);+#4078 = CARTESIAN_POINT('',(-2.6375,-0.325,0.15));+#4079 = DIRECTION('',(-0.,-0.,-1.));+#4080 = DIRECTION('',(-1.,0.,0.));+#4081 = DEFINITIONAL_REPRESENTATION('',(#4082),#4086);+#4082 = LINE('',#4083,#4084);+#4083 = CARTESIAN_POINT('',(0.,0.15));+#4084 = VECTOR('',#4085,1.);+#4085 = DIRECTION('',(1.,0.));+#4086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4087 = ORIENTED_EDGE('',*,*,#4088,.T.);+#4088 = EDGE_CURVE('',#4061,#4089,#4091,.T.);+#4089 = VERTEX_POINT('',#4090);+#4090 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4091 = SURFACE_CURVE('',#4092,(#4096,#4103),.PCURVE_S1.);+#4092 = LINE('',#4093,#4094);+#4093 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4094 = VECTOR('',#4095,1.);+#4095 = DIRECTION('',(0.,0.,-1.));+#4096 = PCURVE('',#4021,#4097);+#4097 = DEFINITIONAL_REPRESENTATION('',(#4098),#4102);+#4098 = LINE('',#4099,#4100);+#4099 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4100 = VECTOR('',#4101,1.);+#4101 = DIRECTION('',(1.,0.));+#4102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4103 = PCURVE('',#4104,#4109);+#4104 = PLANE('',#4105);+#4105 = AXIS2_PLACEMENT_3D('',#4106,#4107,#4108);+#4106 = CARTESIAN_POINT('',(-3.205,-0.325,0.15));+#4107 = DIRECTION('',(1.,0.,0.));+#4108 = DIRECTION('',(0.,0.,-1.));+#4109 = DEFINITIONAL_REPRESENTATION('',(#4110),#4114);+#4110 = LINE('',#4111,#4112);+#4111 = CARTESIAN_POINT('',(0.,0.15));+#4112 = VECTOR('',#4113,1.);+#4113 = DIRECTION('',(1.,0.));+#4114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4115 = ORIENTED_EDGE('',*,*,#4116,.T.);+#4116 = EDGE_CURVE('',#4089,#4117,#4119,.T.);+#4117 = VERTEX_POINT('',#4118);+#4118 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4119 = SURFACE_CURVE('',#4120,(#4124,#4131),.PCURVE_S1.);+#4120 = LINE('',#4121,#4122);+#4121 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4122 = VECTOR('',#4123,1.);+#4123 = DIRECTION('',(1.,0.,0.));+#4124 = PCURVE('',#4021,#4125);+#4125 = DEFINITIONAL_REPRESENTATION('',(#4126),#4130);+#4126 = LINE('',#4127,#4128);+#4127 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4128 = VECTOR('',#4129,1.);+#4129 = DIRECTION('',(0.,1.));+#4130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4131 = PCURVE('',#4132,#4137);+#4132 = PLANE('',#4133);+#4133 = AXIS2_PLACEMENT_3D('',#4134,#4135,#4136);+#4134 = CARTESIAN_POINT('',(-3.205,-0.325,0.));+#4135 = DIRECTION('',(-0.,0.,1.));+#4136 = DIRECTION('',(1.,0.,0.));+#4137 = DEFINITIONAL_REPRESENTATION('',(#4138),#4142);+#4138 = LINE('',#4139,#4140);+#4139 = CARTESIAN_POINT('',(0.,0.15));+#4140 = VECTOR('',#4141,1.);+#4141 = DIRECTION('',(1.,0.));+#4142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4143 = ORIENTED_EDGE('',*,*,#4144,.T.);+#4144 = EDGE_CURVE('',#4117,#4145,#4147,.T.);+#4145 = VERTEX_POINT('',#4146);+#4146 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#4147 = SURFACE_CURVE('',#4148,(#4152,#4159),.PCURVE_S1.);+#4148 = LINE('',#4149,#4150);+#4149 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4150 = VECTOR('',#4151,1.);+#4151 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4152 = PCURVE('',#4021,#4153);+#4153 = DEFINITIONAL_REPRESENTATION('',(#4154),#4158);+#4154 = LINE('',#4155,#4156);+#4155 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4156 = VECTOR('',#4157,1.);+#4157 = DIRECTION('',(-0.839949759337,0.542664170358));+#4158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4159 = PCURVE('',#4160,#4165);+#4160 = PLANE('',#4161);+#4161 = AXIS2_PLACEMENT_3D('',#4162,#4163,#4164);+#4162 = CARTESIAN_POINT('',(-2.4875,-0.325,0.));+#4163 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#4164 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4165 = DEFINITIONAL_REPRESENTATION('',(#4166),#4170);+#4166 = LINE('',#4167,#4168);+#4167 = CARTESIAN_POINT('',(0.,0.15));+#4168 = VECTOR('',#4169,1.);+#4169 = DIRECTION('',(1.,0.));+#4170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4171 = ORIENTED_EDGE('',*,*,#4172,.T.);+#4172 = EDGE_CURVE('',#4145,#4173,#4175,.T.);+#4173 = VERTEX_POINT('',#4174);+#4174 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#4175 = SURFACE_CURVE('',#4176,(#4180,#4187),.PCURVE_S1.);+#4176 = LINE('',#4177,#4178);+#4177 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));+#4178 = VECTOR('',#4179,1.);+#4179 = DIRECTION('',(1.,0.,0.));+#4180 = PCURVE('',#4021,#4181);+#4181 = DEFINITIONAL_REPRESENTATION('',(#4182),#4186);+#4182 = LINE('',#4183,#4184);+#4183 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4184 = VECTOR('',#4185,1.);+#4185 = DIRECTION('',(0.,1.));+#4186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4187 = PCURVE('',#4188,#4193);+#4188 = PLANE('',#4189);+#4189 = AXIS2_PLACEMENT_3D('',#4190,#4191,#4192);+#4190 = CARTESIAN_POINT('',(-2.2,-0.325,0.445));+#4191 = DIRECTION('',(-0.,0.,1.));+#4192 = DIRECTION('',(1.,0.,0.));+#4193 = DEFINITIONAL_REPRESENTATION('',(#4194),#4198); #4194 = LINE('',#4195,#4196);-#4195 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#4195 = CARTESIAN_POINT('',(0.,0.15)); #4196 = VECTOR('',#4197,1.);-#4197 = DIRECTION('',(-1.,0.,0.));-#4198 = PCURVE('',#3967,#4199);-#4199 = DEFINITIONAL_REPRESENTATION('',(#4200),#4204);-#4200 = LINE('',#4201,#4202);-#4201 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#4202 = VECTOR('',#4203,1.);-#4203 = DIRECTION('',(0.,-1.));-#4204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4205 = PCURVE('',#4151,#4206);-#4206 = DEFINITIONAL_REPRESENTATION('',(#4207),#4211);-#4207 = LINE('',#4208,#4209);-#4208 = CARTESIAN_POINT('',(0.,-0.15));-#4209 = VECTOR('',#4210,1.);-#4210 = DIRECTION('',(1.,0.));-#4211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4212 = ORIENTED_EDGE('',*,*,#4213,.T.);-#4213 = EDGE_CURVE('',#4191,#4214,#4216,.T.);-#4214 = VERTEX_POINT('',#4215);-#4215 = CARTESIAN_POINT('',(-3.205,-0.475,0.));-#4216 = SURFACE_CURVE('',#4217,(#4221,#4228),.PCURVE_S1.);-#4217 = LINE('',#4218,#4219);-#4218 = CARTESIAN_POINT('',(-3.205,-0.475,0.15));-#4219 = VECTOR('',#4220,1.);-#4220 = DIRECTION('',(0.,0.,-1.));-#4221 = PCURVE('',#3967,#4222);-#4222 = DEFINITIONAL_REPRESENTATION('',(#4223),#4227);-#4223 = LINE('',#4224,#4225);-#4224 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#4225 = VECTOR('',#4226,1.);-#4226 = DIRECTION('',(1.,0.));-#4227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4228 = PCURVE('',#4229,#4234);-#4229 = PLANE('',#4230);-#4230 = AXIS2_PLACEMENT_3D('',#4231,#4232,#4233);-#4231 = CARTESIAN_POINT('',(-3.205,-0.325,0.15));-#4232 = DIRECTION('',(1.,0.,0.));-#4233 = DIRECTION('',(0.,0.,-1.));-#4234 = DEFINITIONAL_REPRESENTATION('',(#4235),#4239);-#4235 = LINE('',#4236,#4237);-#4236 = CARTESIAN_POINT('',(0.,-0.15));-#4237 = VECTOR('',#4238,1.);-#4238 = DIRECTION('',(1.,0.));-#4239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4240 = ORIENTED_EDGE('',*,*,#4241,.T.);-#4241 = EDGE_CURVE('',#4214,#4242,#4244,.T.);-#4242 = VERTEX_POINT('',#4243);-#4243 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));-#4244 = SURFACE_CURVE('',#4245,(#4249,#4256),.PCURVE_S1.);-#4245 = LINE('',#4246,#4247);-#4246 = CARTESIAN_POINT('',(-3.205,-0.475,0.));-#4247 = VECTOR('',#4248,1.);-#4248 = DIRECTION('',(1.,0.,0.));-#4249 = PCURVE('',#3967,#4250);-#4250 = DEFINITIONAL_REPRESENTATION('',(#4251),#4255);+#4197 = DIRECTION('',(1.,0.));+#4198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4199 = ORIENTED_EDGE('',*,*,#4200,.T.);+#4200 = EDGE_CURVE('',#4173,#3919,#4201,.T.);+#4201 = SURFACE_CURVE('',#4202,(#4206,#4213),.PCURVE_S1.);+#4202 = LINE('',#4203,#4204);+#4203 = CARTESIAN_POINT('',(-2.15,-0.175,0.445));+#4204 = VECTOR('',#4205,1.);+#4205 = DIRECTION('',(0.,0.,1.));+#4206 = PCURVE('',#4021,#4207);+#4207 = DEFINITIONAL_REPRESENTATION('',(#4208),#4212);+#4208 = LINE('',#4209,#4210);+#4209 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4210 = VECTOR('',#4211,1.);+#4211 = DIRECTION('',(-1.,0.));+#4212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4213 = PCURVE('',#3939,#4214);+#4214 = DEFINITIONAL_REPRESENTATION('',(#4215),#4219);+#4215 = LINE('',#4216,#4217);+#4216 = CARTESIAN_POINT('',(0.,0.15));+#4217 = VECTOR('',#4218,1.);+#4218 = DIRECTION('',(1.,0.));+#4219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4220 = ADVANCED_FACE('',(#4221),#4188,.F.);+#4221 = FACE_BOUND('',#4222,.F.);+#4222 = EDGE_LOOP('',(#4223,#4246,#4269,#4290));+#4223 = ORIENTED_EDGE('',*,*,#4224,.F.);+#4224 = EDGE_CURVE('',#4225,#4145,#4227,.T.);+#4225 = VERTEX_POINT('',#4226);+#4226 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4227 = SURFACE_CURVE('',#4228,(#4232,#4239),.PCURVE_S1.);+#4228 = LINE('',#4229,#4230);+#4229 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4230 = VECTOR('',#4231,1.);+#4231 = DIRECTION('',(0.,1.,0.));+#4232 = PCURVE('',#4188,#4233);+#4233 = DEFINITIONAL_REPRESENTATION('',(#4234),#4238);+#4234 = LINE('',#4235,#4236);+#4235 = CARTESIAN_POINT('',(0.,-0.15));+#4236 = VECTOR('',#4237,1.);+#4237 = DIRECTION('',(0.,1.));+#4238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4239 = PCURVE('',#4160,#4240);+#4240 = DEFINITIONAL_REPRESENTATION('',(#4241),#4245);+#4241 = LINE('',#4242,#4243);+#4242 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#4243 = VECTOR('',#4244,1.);+#4244 = DIRECTION('',(0.,1.));+#4245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4246 = ORIENTED_EDGE('',*,*,#4247,.T.);+#4247 = EDGE_CURVE('',#4225,#4248,#4250,.T.);+#4248 = VERTEX_POINT('',#4249);+#4249 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4250 = SURFACE_CURVE('',#4251,(#4255,#4262),.PCURVE_S1.); #4251 = LINE('',#4252,#4253);-#4252 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4252 = CARTESIAN_POINT('',(-2.2,-0.475,0.445)); #4253 = VECTOR('',#4254,1.);-#4254 = DIRECTION('',(0.,1.));-#4255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4256 = PCURVE('',#4257,#4262);-#4257 = PLANE('',#4258);-#4258 = AXIS2_PLACEMENT_3D('',#4259,#4260,#4261);-#4259 = CARTESIAN_POINT('',(-3.205,-0.325,0.));-#4260 = DIRECTION('',(-0.,0.,1.));-#4261 = DIRECTION('',(1.,0.,0.));-#4262 = DEFINITIONAL_REPRESENTATION('',(#4263),#4267);-#4263 = LINE('',#4264,#4265);-#4264 = CARTESIAN_POINT('',(0.,-0.15));-#4265 = VECTOR('',#4266,1.);-#4266 = DIRECTION('',(1.,0.));-#4267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4268 = ORIENTED_EDGE('',*,*,#4269,.T.);-#4269 = EDGE_CURVE('',#4242,#4270,#4272,.T.);-#4270 = VERTEX_POINT('',#4271);-#4271 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));-#4272 = SURFACE_CURVE('',#4273,(#4277,#4284),.PCURVE_S1.);-#4273 = LINE('',#4274,#4275);-#4274 = CARTESIAN_POINT('',(-2.4875,-0.475,0.));-#4275 = VECTOR('',#4276,1.);-#4276 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#4277 = PCURVE('',#3967,#4278);-#4278 = DEFINITIONAL_REPRESENTATION('',(#4279),#4283);-#4279 = LINE('',#4280,#4281);-#4280 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#4281 = VECTOR('',#4282,1.);-#4282 = DIRECTION('',(-0.839949759337,0.542664170358));-#4283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4284 = PCURVE('',#4285,#4290);-#4285 = PLANE('',#4286);-#4286 = AXIS2_PLACEMENT_3D('',#4287,#4288,#4289);-#4287 = CARTESIAN_POINT('',(-2.4875,-0.325,0.));-#4288 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#4289 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#4290 = DEFINITIONAL_REPRESENTATION('',(#4291),#4295);-#4291 = LINE('',#4292,#4293);-#4292 = CARTESIAN_POINT('',(0.,-0.15));-#4293 = VECTOR('',#4294,1.);-#4294 = DIRECTION('',(1.,0.));-#4295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4296 = ORIENTED_EDGE('',*,*,#4297,.T.);-#4297 = EDGE_CURVE('',#4270,#4037,#4298,.T.);+#4254 = DIRECTION('',(1.,0.,0.));+#4255 = PCURVE('',#4188,#4256);+#4256 = DEFINITIONAL_REPRESENTATION('',(#4257),#4261);+#4257 = LINE('',#4258,#4259);+#4258 = CARTESIAN_POINT('',(0.,-0.15));+#4259 = VECTOR('',#4260,1.);+#4260 = DIRECTION('',(1.,0.));+#4261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4262 = PCURVE('',#3967,#4263);+#4263 = DEFINITIONAL_REPRESENTATION('',(#4264),#4268);+#4264 = LINE('',#4265,#4266);+#4265 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4266 = VECTOR('',#4267,1.);+#4267 = DIRECTION('',(0.,1.));+#4268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4269 = ORIENTED_EDGE('',*,*,#4270,.T.);+#4270 = EDGE_CURVE('',#4248,#4173,#4271,.T.);+#4271 = SURFACE_CURVE('',#4272,(#4276,#4283),.PCURVE_S1.);+#4272 = LINE('',#4273,#4274);+#4273 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4274 = VECTOR('',#4275,1.);+#4275 = DIRECTION('',(0.,1.,0.));+#4276 = PCURVE('',#4188,#4277);+#4277 = DEFINITIONAL_REPRESENTATION('',(#4278),#4282);+#4278 = LINE('',#4279,#4280);+#4279 = CARTESIAN_POINT('',(5.E-02,-0.15));+#4280 = VECTOR('',#4281,1.);+#4281 = DIRECTION('',(0.,1.));+#4282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4283 = PCURVE('',#3939,#4284);+#4284 = DEFINITIONAL_REPRESENTATION('',(#4285),#4289);+#4285 = LINE('',#4286,#4287);+#4286 = CARTESIAN_POINT('',(0.,-0.15));+#4287 = VECTOR('',#4288,1.);+#4288 = DIRECTION('',(0.,1.));+#4289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4290 = ORIENTED_EDGE('',*,*,#4172,.F.);+#4291 = ADVANCED_FACE('',(#4292),#4160,.F.);+#4292 = FACE_BOUND('',#4293,.F.);+#4293 = EDGE_LOOP('',(#4294,#4317,#4318,#4319));+#4294 = ORIENTED_EDGE('',*,*,#4295,.T.);+#4295 = EDGE_CURVE('',#4296,#4225,#4298,.T.);+#4296 = VERTEX_POINT('',#4297);+#4297 = CARTESIAN_POINT('',(-2.4875,-0.475,0.)); #4298 = SURFACE_CURVE('',#4299,(#4303,#4310),.PCURVE_S1.); #4299 = LINE('',#4300,#4301);-#4300 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));+#4300 = CARTESIAN_POINT('',(-2.4875,-0.475,0.)); #4301 = VECTOR('',#4302,1.);-#4302 = DIRECTION('',(1.,0.,0.));-#4303 = PCURVE('',#3967,#4304);+#4302 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4303 = PCURVE('',#4160,#4304); #4304 = DEFINITIONAL_REPRESENTATION('',(#4305),#4309); #4305 = LINE('',#4306,#4307);-#4306 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4306 = CARTESIAN_POINT('',(0.,-0.15)); #4307 = VECTOR('',#4308,1.);-#4308 = DIRECTION('',(0.,1.));+#4308 = DIRECTION('',(1.,0.)); #4309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4310 = PCURVE('',#4054,#4311);+#4310 = PCURVE('',#3967,#4311); #4311 = DEFINITIONAL_REPRESENTATION('',(#4312),#4316); #4312 = LINE('',#4313,#4314);-#4313 = CARTESIAN_POINT('',(0.,-0.15));+#4313 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #4314 = VECTOR('',#4315,1.);-#4315 = DIRECTION('',(1.,0.));+#4315 = DIRECTION('',(-0.839949759337,0.542664170358)); #4316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4317 = ORIENTED_EDGE('',*,*,#4066,.T.);-#4318 = ADVANCED_FACE('',(#4319),#4054,.F.);-#4319 = FACE_BOUND('',#4320,.F.);-#4320 = EDGE_LOOP('',(#4321,#4344,#4345,#4346));-#4321 = ORIENTED_EDGE('',*,*,#4322,.F.);-#4322 = EDGE_CURVE('',#4270,#4323,#4325,.T.);-#4323 = VERTEX_POINT('',#4324);-#4324 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));-#4325 = SURFACE_CURVE('',#4326,(#4330,#4337),.PCURVE_S1.);-#4326 = LINE('',#4327,#4328);-#4327 = CARTESIAN_POINT('',(-2.2,-0.475,0.445));-#4328 = VECTOR('',#4329,1.);-#4329 = DIRECTION('',(0.,1.,0.));-#4330 = PCURVE('',#4054,#4331);-#4331 = DEFINITIONAL_REPRESENTATION('',(#4332),#4336);-#4332 = LINE('',#4333,#4334);-#4333 = CARTESIAN_POINT('',(0.,-0.15));-#4334 = VECTOR('',#4335,1.);-#4335 = DIRECTION('',(0.,1.));-#4336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4337 = PCURVE('',#4285,#4338);-#4338 = DEFINITIONAL_REPRESENTATION('',(#4339),#4343);-#4339 = LINE('',#4340,#4341);-#4340 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#4341 = VECTOR('',#4342,1.);-#4342 = DIRECTION('',(0.,1.));-#4343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4344 = ORIENTED_EDGE('',*,*,#4297,.T.);-#4345 = ORIENTED_EDGE('',*,*,#4036,.T.);-#4346 = ORIENTED_EDGE('',*,*,#4347,.F.);-#4347 = EDGE_CURVE('',#4323,#4039,#4348,.T.);-#4348 = SURFACE_CURVE('',#4349,(#4353,#4360),.PCURVE_S1.);-#4349 = LINE('',#4350,#4351);-#4350 = CARTESIAN_POINT('',(-2.2,-0.175,0.445));-#4351 = VECTOR('',#4352,1.);-#4352 = DIRECTION('',(1.,0.,0.));-#4353 = PCURVE('',#4054,#4354);-#4354 = DEFINITIONAL_REPRESENTATION('',(#4355),#4359);-#4355 = LINE('',#4356,#4357);-#4356 = CARTESIAN_POINT('',(0.,0.15));-#4357 = VECTOR('',#4358,1.);-#4358 = DIRECTION('',(1.,0.));-#4359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4360 = PCURVE('',#4021,#4361);-#4361 = DEFINITIONAL_REPRESENTATION('',(#4362),#4366);-#4362 = LINE('',#4363,#4364);-#4363 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#4364 = VECTOR('',#4365,1.);-#4365 = DIRECTION('',(0.,1.));-#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4367 = ADVANCED_FACE('',(#4368),#4151,.F.);-#4368 = FACE_BOUND('',#4369,.F.);-#4369 = EDGE_LOOP('',(#4370,#4371,#4394,#4415));-#4370 = ORIENTED_EDGE('',*,*,#4190,.T.);-#4371 = ORIENTED_EDGE('',*,*,#4372,.F.);-#4372 = EDGE_CURVE('',#4373,#4191,#4375,.T.);-#4373 = VERTEX_POINT('',#4374);-#4374 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#4375 = SURFACE_CURVE('',#4376,(#4380,#4387),.PCURVE_S1.);-#4376 = LINE('',#4377,#4378);-#4377 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#4378 = VECTOR('',#4379,1.);-#4379 = DIRECTION('',(0.,-1.,0.));-#4380 = PCURVE('',#4151,#4381);-#4381 = DEFINITIONAL_REPRESENTATION('',(#4382),#4386);-#4382 = LINE('',#4383,#4384);-#4383 = CARTESIAN_POINT('',(0.5675,0.15));-#4384 = VECTOR('',#4385,1.);-#4385 = DIRECTION('',(0.,-1.));-#4386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4387 = PCURVE('',#4229,#4388);-#4388 = DEFINITIONAL_REPRESENTATION('',(#4389),#4393);-#4389 = LINE('',#4390,#4391);-#4390 = CARTESIAN_POINT('',(0.,0.15));-#4391 = VECTOR('',#4392,1.);-#4392 = DIRECTION('',(0.,-1.));-#4393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4394 = ORIENTED_EDGE('',*,*,#4395,.F.);-#4395 = EDGE_CURVE('',#4136,#4373,#4396,.T.);+#4317 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4318 = ORIENTED_EDGE('',*,*,#4144,.F.);+#4319 = ORIENTED_EDGE('',*,*,#4320,.T.);+#4320 = EDGE_CURVE('',#4117,#4296,#4321,.T.);+#4321 = SURFACE_CURVE('',#4322,(#4326,#4333),.PCURVE_S1.);+#4322 = LINE('',#4323,#4324);+#4323 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));+#4324 = VECTOR('',#4325,1.);+#4325 = DIRECTION('',(0.,-1.,0.));+#4326 = PCURVE('',#4160,#4327);+#4327 = DEFINITIONAL_REPRESENTATION('',(#4328),#4332);+#4328 = LINE('',#4329,#4330);+#4329 = CARTESIAN_POINT('',(0.,0.15));+#4330 = VECTOR('',#4331,1.);+#4331 = DIRECTION('',(0.,-1.));+#4332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4333 = PCURVE('',#4132,#4334);+#4334 = DEFINITIONAL_REPRESENTATION('',(#4335),#4339);+#4335 = LINE('',#4336,#4337);+#4336 = CARTESIAN_POINT('',(0.7175,0.15));+#4337 = VECTOR('',#4338,1.);+#4338 = DIRECTION('',(0.,-1.));+#4339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4340 = ADVANCED_FACE('',(#4341),#4132,.F.);+#4341 = FACE_BOUND('',#4342,.F.);+#4342 = EDGE_LOOP('',(#4343,#4366,#4367,#4368));+#4343 = ORIENTED_EDGE('',*,*,#4344,.T.);+#4344 = EDGE_CURVE('',#4345,#4296,#4347,.T.);+#4345 = VERTEX_POINT('',#4346);+#4346 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#4347 = SURFACE_CURVE('',#4348,(#4352,#4359),.PCURVE_S1.);+#4348 = LINE('',#4349,#4350);+#4349 = CARTESIAN_POINT('',(-3.205,-0.475,0.));+#4350 = VECTOR('',#4351,1.);+#4351 = DIRECTION('',(1.,0.,0.));+#4352 = PCURVE('',#4132,#4353);+#4353 = DEFINITIONAL_REPRESENTATION('',(#4354),#4358);+#4354 = LINE('',#4355,#4356);+#4355 = CARTESIAN_POINT('',(0.,-0.15));+#4356 = VECTOR('',#4357,1.);+#4357 = DIRECTION('',(1.,0.));+#4358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4359 = PCURVE('',#3967,#4360);+#4360 = DEFINITIONAL_REPRESENTATION('',(#4361),#4365);+#4361 = LINE('',#4362,#4363);+#4362 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4363 = VECTOR('',#4364,1.);+#4364 = DIRECTION('',(0.,1.));+#4365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4366 = ORIENTED_EDGE('',*,*,#4320,.F.);+#4367 = ORIENTED_EDGE('',*,*,#4116,.F.);+#4368 = ORIENTED_EDGE('',*,*,#4369,.T.);+#4369 = EDGE_CURVE('',#4089,#4345,#4370,.T.);+#4370 = SURFACE_CURVE('',#4371,(#4375,#4382),.PCURVE_S1.);+#4371 = LINE('',#4372,#4373);+#4372 = CARTESIAN_POINT('',(-3.205,-0.175,0.));+#4373 = VECTOR('',#4374,1.);+#4374 = DIRECTION('',(0.,-1.,0.));+#4375 = PCURVE('',#4132,#4376);+#4376 = DEFINITIONAL_REPRESENTATION('',(#4377),#4381);+#4377 = LINE('',#4378,#4379);+#4378 = CARTESIAN_POINT('',(0.,0.15));+#4379 = VECTOR('',#4380,1.);+#4380 = DIRECTION('',(0.,-1.));+#4381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4382 = PCURVE('',#4104,#4383);+#4383 = DEFINITIONAL_REPRESENTATION('',(#4384),#4388);+#4384 = LINE('',#4385,#4386);+#4385 = CARTESIAN_POINT('',(0.15,0.15));+#4386 = VECTOR('',#4387,1.);+#4387 = DIRECTION('',(0.,-1.));+#4388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4389 = ADVANCED_FACE('',(#4390),#4104,.F.);+#4390 = FACE_BOUND('',#4391,.F.);+#4391 = EDGE_LOOP('',(#4392,#4415,#4416,#4417));+#4392 = ORIENTED_EDGE('',*,*,#4393,.T.);+#4393 = EDGE_CURVE('',#4394,#4345,#4396,.T.);+#4394 = VERTEX_POINT('',#4395);+#4395 = CARTESIAN_POINT('',(-3.205,-0.475,0.15)); #4396 = SURFACE_CURVE('',#4397,(#4401,#4408),.PCURVE_S1.); #4397 = LINE('',#4398,#4399);-#4398 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4398 = CARTESIAN_POINT('',(-3.205,-0.475,0.15)); #4399 = VECTOR('',#4400,1.);-#4400 = DIRECTION('',(-1.,0.,0.));-#4401 = PCURVE('',#4151,#4402);+#4400 = DIRECTION('',(0.,0.,-1.));+#4401 = PCURVE('',#4104,#4402); #4402 = DEFINITIONAL_REPRESENTATION('',(#4403),#4407); #4403 = LINE('',#4404,#4405);-#4404 = CARTESIAN_POINT('',(0.,0.15));+#4404 = CARTESIAN_POINT('',(0.,-0.15)); #4405 = VECTOR('',#4406,1.); #4406 = DIRECTION('',(1.,0.)); #4407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4408 = PCURVE('',#4021,#4409);+#4408 = PCURVE('',#3967,#4409); #4409 = DEFINITIONAL_REPRESENTATION('',(#4410),#4414); #4410 = LINE('',#4411,#4412);-#4411 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#4411 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #4412 = VECTOR('',#4413,1.);-#4413 = DIRECTION('',(0.,-1.));+#4413 = DIRECTION('',(1.,0.)); #4414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4415 = ORIENTED_EDGE('',*,*,#4135,.T.);-#4416 = ADVANCED_FACE('',(#4417),#4021,.F.);-#4417 = FACE_BOUND('',#4418,.F.);-#4418 = EDGE_LOOP('',(#4419,#4420,#4421,#4422,#4445,#4468,#4489,#4490));-#4419 = ORIENTED_EDGE('',*,*,#4007,.T.);-#4420 = ORIENTED_EDGE('',*,*,#4163,.T.);-#4421 = ORIENTED_EDGE('',*,*,#4395,.T.);-#4422 = ORIENTED_EDGE('',*,*,#4423,.T.);-#4423 = EDGE_CURVE('',#4373,#4424,#4426,.T.);-#4424 = VERTEX_POINT('',#4425);-#4425 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#4426 = SURFACE_CURVE('',#4427,(#4431,#4438),.PCURVE_S1.);-#4427 = LINE('',#4428,#4429);-#4428 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));-#4429 = VECTOR('',#4430,1.);-#4430 = DIRECTION('',(0.,0.,-1.));-#4431 = PCURVE('',#4021,#4432);+#4415 = ORIENTED_EDGE('',*,*,#4369,.F.);+#4416 = ORIENTED_EDGE('',*,*,#4088,.F.);+#4417 = ORIENTED_EDGE('',*,*,#4418,.T.);+#4418 = EDGE_CURVE('',#4061,#4394,#4419,.T.);+#4419 = SURFACE_CURVE('',#4420,(#4424,#4431),.PCURVE_S1.);+#4420 = LINE('',#4421,#4422);+#4421 = CARTESIAN_POINT('',(-3.205,-0.175,0.15));+#4422 = VECTOR('',#4423,1.);+#4423 = DIRECTION('',(0.,-1.,0.));+#4424 = PCURVE('',#4104,#4425);+#4425 = DEFINITIONAL_REPRESENTATION('',(#4426),#4430);+#4426 = LINE('',#4427,#4428);+#4427 = CARTESIAN_POINT('',(0.,0.15));+#4428 = VECTOR('',#4429,1.);+#4429 = DIRECTION('',(0.,-1.));+#4430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4431 = PCURVE('',#4076,#4432); #4432 = DEFINITIONAL_REPRESENTATION('',(#4433),#4437); #4433 = LINE('',#4434,#4435);-#4434 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4434 = CARTESIAN_POINT('',(0.5675,0.15)); #4435 = VECTOR('',#4436,1.);-#4436 = DIRECTION('',(1.,0.));+#4436 = DIRECTION('',(0.,-1.)); #4437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4438 = PCURVE('',#4229,#4439);-#4439 = DEFINITIONAL_REPRESENTATION('',(#4440),#4444);-#4440 = LINE('',#4441,#4442);-#4441 = CARTESIAN_POINT('',(0.,0.15));-#4442 = VECTOR('',#4443,1.);-#4443 = DIRECTION('',(1.,0.));-#4444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4445 = ORIENTED_EDGE('',*,*,#4446,.T.);-#4446 = EDGE_CURVE('',#4424,#4447,#4449,.T.);-#4447 = VERTEX_POINT('',#4448);-#4448 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#4449 = SURFACE_CURVE('',#4450,(#4454,#4461),.PCURVE_S1.);-#4450 = LINE('',#4451,#4452);-#4451 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#4452 = VECTOR('',#4453,1.);-#4453 = DIRECTION('',(1.,0.,0.));-#4454 = PCURVE('',#4021,#4455);-#4455 = DEFINITIONAL_REPRESENTATION('',(#4456),#4460);-#4456 = LINE('',#4457,#4458);-#4457 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#4458 = VECTOR('',#4459,1.);-#4459 = DIRECTION('',(0.,1.));-#4460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4461 = PCURVE('',#4257,#4462);-#4462 = DEFINITIONAL_REPRESENTATION('',(#4463),#4467);-#4463 = LINE('',#4464,#4465);-#4464 = CARTESIAN_POINT('',(0.,0.15));-#4465 = VECTOR('',#4466,1.);-#4466 = DIRECTION('',(1.,0.));-#4467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4468 = ORIENTED_EDGE('',*,*,#4469,.T.);-#4469 = EDGE_CURVE('',#4447,#4323,#4470,.T.);-#4470 = SURFACE_CURVE('',#4471,(#4475,#4482),.PCURVE_S1.);-#4471 = LINE('',#4472,#4473);-#4472 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#4473 = VECTOR('',#4474,1.);-#4474 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#4475 = PCURVE('',#4021,#4476);-#4476 = DEFINITIONAL_REPRESENTATION('',(#4477),#4481);-#4477 = LINE('',#4478,#4479);-#4478 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#4479 = VECTOR('',#4480,1.);-#4480 = DIRECTION('',(-0.839949759337,0.542664170358));-#4481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4482 = PCURVE('',#4285,#4483);-#4483 = DEFINITIONAL_REPRESENTATION('',(#4484),#4488);-#4484 = LINE('',#4485,#4486);-#4485 = CARTESIAN_POINT('',(0.,0.15));-#4486 = VECTOR('',#4487,1.);-#4487 = DIRECTION('',(1.,0.));-#4488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4489 = ORIENTED_EDGE('',*,*,#4347,.T.);-#4490 = ORIENTED_EDGE('',*,*,#4088,.T.);-#4491 = ADVANCED_FACE('',(#4492),#4229,.F.);-#4492 = FACE_BOUND('',#4493,.F.);-#4493 = EDGE_LOOP('',(#4494,#4495,#4516,#4517));-#4494 = ORIENTED_EDGE('',*,*,#4213,.T.);-#4495 = ORIENTED_EDGE('',*,*,#4496,.F.);-#4496 = EDGE_CURVE('',#4424,#4214,#4497,.T.);-#4497 = SURFACE_CURVE('',#4498,(#4502,#4509),.PCURVE_S1.);-#4498 = LINE('',#4499,#4500);-#4499 = CARTESIAN_POINT('',(-3.205,-0.175,0.));-#4500 = VECTOR('',#4501,1.);-#4501 = DIRECTION('',(0.,-1.,0.));-#4502 = PCURVE('',#4229,#4503);-#4503 = DEFINITIONAL_REPRESENTATION('',(#4504),#4508);-#4504 = LINE('',#4505,#4506);-#4505 = CARTESIAN_POINT('',(0.15,0.15));-#4506 = VECTOR('',#4507,1.);-#4507 = DIRECTION('',(0.,-1.));-#4508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4509 = PCURVE('',#4257,#4510);-#4510 = DEFINITIONAL_REPRESENTATION('',(#4511),#4515);-#4511 = LINE('',#4512,#4513);-#4512 = CARTESIAN_POINT('',(0.,0.15));-#4513 = VECTOR('',#4514,1.);-#4514 = DIRECTION('',(0.,-1.));-#4515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4516 = ORIENTED_EDGE('',*,*,#4423,.F.);-#4517 = ORIENTED_EDGE('',*,*,#4372,.T.);-#4518 = ADVANCED_FACE('',(#4519),#4257,.F.);-#4519 = FACE_BOUND('',#4520,.F.);-#4520 = EDGE_LOOP('',(#4521,#4522,#4543,#4544));-#4521 = ORIENTED_EDGE('',*,*,#4241,.T.);-#4522 = ORIENTED_EDGE('',*,*,#4523,.F.);-#4523 = EDGE_CURVE('',#4447,#4242,#4524,.T.);-#4524 = SURFACE_CURVE('',#4525,(#4529,#4536),.PCURVE_S1.);-#4525 = LINE('',#4526,#4527);-#4526 = CARTESIAN_POINT('',(-2.4875,-0.175,0.));-#4527 = VECTOR('',#4528,1.);-#4528 = DIRECTION('',(0.,-1.,0.));-#4529 = PCURVE('',#4257,#4530);-#4530 = DEFINITIONAL_REPRESENTATION('',(#4531),#4535);-#4531 = LINE('',#4532,#4533);-#4532 = CARTESIAN_POINT('',(0.7175,0.15));-#4533 = VECTOR('',#4534,1.);-#4534 = DIRECTION('',(0.,-1.));-#4535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4536 = PCURVE('',#4285,#4537);-#4537 = DEFINITIONAL_REPRESENTATION('',(#4538),#4542);-#4538 = LINE('',#4539,#4540);-#4539 = CARTESIAN_POINT('',(0.,0.15));-#4540 = VECTOR('',#4541,1.);-#4541 = DIRECTION('',(0.,-1.));-#4542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4543 = ORIENTED_EDGE('',*,*,#4446,.F.);-#4544 = ORIENTED_EDGE('',*,*,#4496,.T.);-#4545 = ADVANCED_FACE('',(#4546),#4285,.F.);+#4438 = ADVANCED_FACE('',(#4439),#4076,.F.);+#4439 = FACE_BOUND('',#4440,.F.);+#4440 = EDGE_LOOP('',(#4441,#4464,#4465,#4466));+#4441 = ORIENTED_EDGE('',*,*,#4442,.T.);+#4442 = EDGE_CURVE('',#4443,#4394,#4445,.T.);+#4443 = VERTEX_POINT('',#4444);+#4444 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#4445 = SURFACE_CURVE('',#4446,(#4450,#4457),.PCURVE_S1.);+#4446 = LINE('',#4447,#4448);+#4447 = CARTESIAN_POINT('',(-2.6375,-0.475,0.15));+#4448 = VECTOR('',#4449,1.);+#4449 = DIRECTION('',(-1.,0.,0.));+#4450 = PCURVE('',#4076,#4451);+#4451 = DEFINITIONAL_REPRESENTATION('',(#4452),#4456);+#4452 = LINE('',#4453,#4454);+#4453 = CARTESIAN_POINT('',(0.,-0.15));+#4454 = VECTOR('',#4455,1.);+#4455 = DIRECTION('',(1.,0.));+#4456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4457 = PCURVE('',#3967,#4458);+#4458 = DEFINITIONAL_REPRESENTATION('',(#4459),#4463);+#4459 = LINE('',#4460,#4461);+#4460 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#4461 = VECTOR('',#4462,1.);+#4462 = DIRECTION('',(0.,-1.));+#4463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4464 = ORIENTED_EDGE('',*,*,#4418,.F.);+#4465 = ORIENTED_EDGE('',*,*,#4060,.F.);+#4466 = ORIENTED_EDGE('',*,*,#4467,.T.);+#4467 = EDGE_CURVE('',#4038,#4443,#4468,.T.);+#4468 = SURFACE_CURVE('',#4469,(#4473,#4480),.PCURVE_S1.);+#4469 = LINE('',#4470,#4471);+#4470 = CARTESIAN_POINT('',(-2.6375,-0.175,0.15));+#4471 = VECTOR('',#4472,1.);+#4472 = DIRECTION('',(0.,-1.,0.));+#4473 = PCURVE('',#4076,#4474);+#4474 = DEFINITIONAL_REPRESENTATION('',(#4475),#4479);+#4475 = LINE('',#4476,#4477);+#4476 = CARTESIAN_POINT('',(0.,0.15));+#4477 = VECTOR('',#4478,1.);+#4478 = DIRECTION('',(0.,-1.));+#4479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4480 = PCURVE('',#3995,#4481);+#4481 = DEFINITIONAL_REPRESENTATION('',(#4482),#4486);+#4482 = LINE('',#4483,#4484);+#4483 = CARTESIAN_POINT('',(0.529793591883,0.15));+#4484 = VECTOR('',#4485,1.);+#4485 = DIRECTION('',(-0.,-1.));+#4486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4487 = ADVANCED_FACE('',(#4488),#3995,.F.);+#4488 = FACE_BOUND('',#4489,.F.);+#4489 = EDGE_LOOP('',(#4490,#4511,#4512,#4513));+#4490 = ORIENTED_EDGE('',*,*,#4491,.T.);+#4491 = EDGE_CURVE('',#3952,#4443,#4492,.T.);+#4492 = SURFACE_CURVE('',#4493,(#4497,#4504),.PCURVE_S1.);+#4493 = LINE('',#4494,#4495);+#4494 = CARTESIAN_POINT('',(-2.35,-0.475,0.595));+#4495 = VECTOR('',#4496,1.);+#4496 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4497 = PCURVE('',#3995,#4498);+#4498 = DEFINITIONAL_REPRESENTATION('',(#4499),#4503);+#4499 = LINE('',#4500,#4501);+#4500 = CARTESIAN_POINT('',(-0.,-0.15));+#4501 = VECTOR('',#4502,1.);+#4502 = DIRECTION('',(1.,0.));+#4503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4504 = PCURVE('',#3967,#4505);+#4505 = DEFINITIONAL_REPRESENTATION('',(#4506),#4510);+#4506 = LINE('',#4507,#4508);+#4507 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4508 = VECTOR('',#4509,1.);+#4509 = DIRECTION('',(0.839949759337,-0.542664170358));+#4510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4511 = ORIENTED_EDGE('',*,*,#4467,.F.);+#4512 = ORIENTED_EDGE('',*,*,#4037,.F.);+#4513 = ORIENTED_EDGE('',*,*,#3979,.T.);+#4514 = ADVANCED_FACE('',(#4515),#3967,.T.);+#4515 = FACE_BOUND('',#4516,.T.);+#4516 = EDGE_LOOP('',(#4517,#4518,#4519,#4520,#4521,#4522,#4523,#4524));+#4517 = ORIENTED_EDGE('',*,*,#3951,.T.);+#4518 = ORIENTED_EDGE('',*,*,#4491,.T.);+#4519 = ORIENTED_EDGE('',*,*,#4442,.T.);+#4520 = ORIENTED_EDGE('',*,*,#4393,.T.);+#4521 = ORIENTED_EDGE('',*,*,#4344,.T.);+#4522 = ORIENTED_EDGE('',*,*,#4295,.T.);+#4523 = ORIENTED_EDGE('',*,*,#4247,.T.);+#4524 = ORIENTED_EDGE('',*,*,#4525,.T.);+#4525 = EDGE_CURVE('',#4248,#3917,#4526,.T.);+#4526 = SURFACE_CURVE('',#4527,(#4531,#4538),.PCURVE_S1.);+#4527 = LINE('',#4528,#4529);+#4528 = CARTESIAN_POINT('',(-2.15,-0.475,0.445));+#4529 = VECTOR('',#4530,1.);+#4530 = DIRECTION('',(0.,0.,1.));+#4531 = PCURVE('',#3967,#4532);+#4532 = DEFINITIONAL_REPRESENTATION('',(#4533),#4537);+#4533 = LINE('',#4534,#4535);+#4534 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4535 = VECTOR('',#4536,1.);+#4536 = DIRECTION('',(-1.,0.));+#4537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4538 = PCURVE('',#3939,#4539);+#4539 = DEFINITIONAL_REPRESENTATION('',(#4540),#4544);+#4540 = LINE('',#4541,#4542);+#4541 = CARTESIAN_POINT('',(0.,-0.15));+#4542 = VECTOR('',#4543,1.);+#4543 = DIRECTION('',(1.,0.));+#4544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4545 = ADVANCED_FACE('',(#4546),#3939,.F.); #4546 = FACE_BOUND('',#4547,.F.); #4547 = EDGE_LOOP('',(#4548,#4549,#4550,#4551));-#4548 = ORIENTED_EDGE('',*,*,#4269,.T.);-#4549 = ORIENTED_EDGE('',*,*,#4322,.T.);-#4550 = ORIENTED_EDGE('',*,*,#4469,.F.);-#4551 = ORIENTED_EDGE('',*,*,#4523,.T.);+#4548 = ORIENTED_EDGE('',*,*,#4270,.F.);+#4549 = ORIENTED_EDGE('',*,*,#4525,.T.);+#4550 = ORIENTED_EDGE('',*,*,#3916,.T.);+#4551 = ORIENTED_EDGE('',*,*,#4200,.F.); #4552 = MANIFOLD_SOLID_BREP('',#4553);-#4553 = CLOSED_SHELL('',(#4554,#4674,#4750,#4826,#4960,#5009,#5058,#5133- ,#5160,#5187));+#4553 = CLOSED_SHELL('',(#4554,#4674,#4862,#4933,#4982,#5031,#5080,#5129+ ,#5156,#5187)); #4554 = ADVANCED_FACE('',(#4555),#4569,.F.); #4555 = FACE_BOUND('',#4556,.F.); #4556 = EDGE_LOOP('',(#4557,#4592,#4620,#4648));@@ -5395,609 +5395,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #4673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4674 = ADVANCED_FACE('',(#4675),#4581,.F.);+#4674 = ADVANCED_FACE('',(#4675),#4663,.F.); #4675 = FACE_BOUND('',#4676,.F.);-#4676 = EDGE_LOOP('',(#4677,#4707,#4728,#4729));-#4677 = ORIENTED_EDGE('',*,*,#4678,.F.);-#4678 = EDGE_CURVE('',#4679,#4681,#4683,.T.);-#4679 = VERTEX_POINT('',#4680);-#4680 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#4681 = VERTEX_POINT('',#4682);-#4682 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));-#4683 = SURFACE_CURVE('',#4684,(#4688,#4695),.PCURVE_S1.);-#4684 = LINE('',#4685,#4686);-#4685 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#4686 = VECTOR('',#4687,1.);-#4687 = DIRECTION('',(0.,1.,0.));-#4688 = PCURVE('',#4581,#4689);-#4689 = DEFINITIONAL_REPRESENTATION('',(#4690),#4694);-#4690 = LINE('',#4691,#4692);-#4691 = CARTESIAN_POINT('',(0.,-0.15));-#4692 = VECTOR('',#4693,1.);-#4693 = DIRECTION('',(0.,1.));-#4694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4695 = PCURVE('',#4696,#4701);-#4696 = PLANE('',#4697);-#4697 = AXIS2_PLACEMENT_3D('',#4698,#4699,#4700);-#4698 = CARTESIAN_POINT('',(-2.2,-0.975,0.445));-#4699 = DIRECTION('',(-0.,0.,1.));-#4700 = DIRECTION('',(1.,0.,0.));-#4701 = DEFINITIONAL_REPRESENTATION('',(#4702),#4706);-#4702 = LINE('',#4703,#4704);-#4703 = CARTESIAN_POINT('',(5.E-02,-0.15));-#4704 = VECTOR('',#4705,1.);-#4705 = DIRECTION('',(0.,1.));-#4706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4707 = ORIENTED_EDGE('',*,*,#4708,.T.);-#4708 = EDGE_CURVE('',#4679,#4559,#4709,.T.);-#4709 = SURFACE_CURVE('',#4710,(#4714,#4721),.PCURVE_S1.);-#4710 = LINE('',#4711,#4712);-#4711 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));-#4712 = VECTOR('',#4713,1.);-#4713 = DIRECTION('',(0.,0.,1.));-#4714 = PCURVE('',#4581,#4715);-#4715 = DEFINITIONAL_REPRESENTATION('',(#4716),#4720);-#4716 = LINE('',#4717,#4718);-#4717 = CARTESIAN_POINT('',(0.,-0.15));-#4718 = VECTOR('',#4719,1.);-#4719 = DIRECTION('',(1.,0.));-#4720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4721 = PCURVE('',#4609,#4722);-#4722 = DEFINITIONAL_REPRESENTATION('',(#4723),#4727);-#4723 = LINE('',#4724,#4725);-#4724 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#4725 = VECTOR('',#4726,1.);-#4726 = DIRECTION('',(-1.,0.));-#4727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4728 = ORIENTED_EDGE('',*,*,#4558,.T.);-#4729 = ORIENTED_EDGE('',*,*,#4730,.F.);-#4730 = EDGE_CURVE('',#4681,#4561,#4731,.T.);-#4731 = SURFACE_CURVE('',#4732,(#4736,#4743),.PCURVE_S1.);-#4732 = LINE('',#4733,#4734);-#4733 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));-#4734 = VECTOR('',#4735,1.);-#4735 = DIRECTION('',(0.,0.,1.));-#4736 = PCURVE('',#4581,#4737);-#4737 = DEFINITIONAL_REPRESENTATION('',(#4738),#4742);-#4738 = LINE('',#4739,#4740);-#4739 = CARTESIAN_POINT('',(0.,0.15));-#4740 = VECTOR('',#4741,1.);-#4741 = DIRECTION('',(1.,0.));-#4742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4743 = PCURVE('',#4663,#4744);-#4744 = DEFINITIONAL_REPRESENTATION('',(#4745),#4749);-#4745 = LINE('',#4746,#4747);-#4746 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#4747 = VECTOR('',#4748,1.);-#4748 = DIRECTION('',(-1.,0.));-#4749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4750 = ADVANCED_FACE('',(#4751),#4637,.F.);-#4751 = FACE_BOUND('',#4752,.F.);-#4752 = EDGE_LOOP('',(#4753,#4776,#4804,#4825));-#4753 = ORIENTED_EDGE('',*,*,#4754,.T.);-#4754 = EDGE_CURVE('',#4594,#4755,#4757,.T.);-#4755 = VERTEX_POINT('',#4756);-#4756 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));-#4757 = SURFACE_CURVE('',#4758,(#4762,#4769),.PCURVE_S1.);-#4758 = LINE('',#4759,#4760);-#4759 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));-#4760 = VECTOR('',#4761,1.);-#4761 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#4762 = PCURVE('',#4637,#4763);-#4763 = DEFINITIONAL_REPRESENTATION('',(#4764),#4768);-#4764 = LINE('',#4765,#4766);-#4765 = CARTESIAN_POINT('',(-0.,-0.15));-#4766 = VECTOR('',#4767,1.);-#4767 = DIRECTION('',(1.,0.));-#4768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4769 = PCURVE('',#4609,#4770);-#4770 = DEFINITIONAL_REPRESENTATION('',(#4771),#4775);-#4771 = LINE('',#4772,#4773);-#4772 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#4773 = VECTOR('',#4774,1.);-#4774 = DIRECTION('',(0.839949759337,-0.542664170358));-#4775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4776 = ORIENTED_EDGE('',*,*,#4777,.F.);-#4777 = EDGE_CURVE('',#4778,#4755,#4780,.T.);-#4778 = VERTEX_POINT('',#4779);-#4779 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));-#4780 = SURFACE_CURVE('',#4781,(#4785,#4792),.PCURVE_S1.);-#4781 = LINE('',#4782,#4783);-#4782 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));-#4783 = VECTOR('',#4784,1.);-#4784 = DIRECTION('',(0.,-1.,0.));-#4785 = PCURVE('',#4637,#4786);-#4786 = DEFINITIONAL_REPRESENTATION('',(#4787),#4791);-#4787 = LINE('',#4788,#4789);-#4788 = CARTESIAN_POINT('',(0.529793591883,0.15));-#4789 = VECTOR('',#4790,1.);-#4790 = DIRECTION('',(-0.,-1.));-#4791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4792 = PCURVE('',#4793,#4798);-#4793 = PLANE('',#4794);-#4794 = AXIS2_PLACEMENT_3D('',#4795,#4796,#4797);-#4795 = CARTESIAN_POINT('',(-2.6375,-0.975,0.15));-#4796 = DIRECTION('',(-0.,-0.,-1.));-#4797 = DIRECTION('',(-1.,0.,0.));-#4798 = DEFINITIONAL_REPRESENTATION('',(#4799),#4803);-#4799 = LINE('',#4800,#4801);-#4800 = CARTESIAN_POINT('',(0.,0.15));-#4801 = VECTOR('',#4802,1.);-#4802 = DIRECTION('',(0.,-1.));-#4803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4804 = ORIENTED_EDGE('',*,*,#4805,.F.);-#4805 = EDGE_CURVE('',#4622,#4778,#4806,.T.);-#4806 = SURFACE_CURVE('',#4807,(#4811,#4818),.PCURVE_S1.);-#4807 = LINE('',#4808,#4809);-#4808 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));-#4809 = VECTOR('',#4810,1.);-#4810 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#4811 = PCURVE('',#4637,#4812);-#4812 = DEFINITIONAL_REPRESENTATION('',(#4813),#4817);-#4813 = LINE('',#4814,#4815);-#4814 = CARTESIAN_POINT('',(0.,0.15));-#4815 = VECTOR('',#4816,1.);-#4816 = DIRECTION('',(1.,0.));-#4817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4818 = PCURVE('',#4663,#4819);-#4819 = DEFINITIONAL_REPRESENTATION('',(#4820),#4824);-#4820 = LINE('',#4821,#4822);-#4821 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#4822 = VECTOR('',#4823,1.);-#4823 = DIRECTION('',(0.839949759337,-0.542664170358));-#4824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4825 = ORIENTED_EDGE('',*,*,#4621,.T.);-#4826 = ADVANCED_FACE('',(#4827),#4609,.T.);-#4827 = FACE_BOUND('',#4828,.T.);-#4828 = EDGE_LOOP('',(#4829,#4830,#4831,#4854,#4882,#4910,#4938,#4959));-#4829 = ORIENTED_EDGE('',*,*,#4593,.T.);-#4830 = ORIENTED_EDGE('',*,*,#4754,.T.);-#4831 = ORIENTED_EDGE('',*,*,#4832,.T.);-#4832 = EDGE_CURVE('',#4755,#4833,#4835,.T.);-#4833 = VERTEX_POINT('',#4834);-#4834 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));-#4835 = SURFACE_CURVE('',#4836,(#4840,#4847),.PCURVE_S1.);+#4676 = EDGE_LOOP('',(#4677,#4678,#4701,#4729,#4757,#4785,#4813,#4841));+#4677 = ORIENTED_EDGE('',*,*,#4649,.T.);+#4678 = ORIENTED_EDGE('',*,*,#4679,.T.);+#4679 = EDGE_CURVE('',#4622,#4680,#4682,.T.);+#4680 = VERTEX_POINT('',#4681);+#4681 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#4682 = SURFACE_CURVE('',#4683,(#4687,#4694),.PCURVE_S1.);+#4683 = LINE('',#4684,#4685);+#4684 = CARTESIAN_POINT('',(-2.35,-0.825,0.595));+#4685 = VECTOR('',#4686,1.);+#4686 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#4687 = PCURVE('',#4663,#4688);+#4688 = DEFINITIONAL_REPRESENTATION('',(#4689),#4693);+#4689 = LINE('',#4690,#4691);+#4690 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#4691 = VECTOR('',#4692,1.);+#4692 = DIRECTION('',(0.839949759337,-0.542664170358));+#4693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4694 = PCURVE('',#4637,#4695);+#4695 = DEFINITIONAL_REPRESENTATION('',(#4696),#4700);+#4696 = LINE('',#4697,#4698);+#4697 = CARTESIAN_POINT('',(0.,0.15));+#4698 = VECTOR('',#4699,1.);+#4699 = DIRECTION('',(1.,0.));+#4700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4701 = ORIENTED_EDGE('',*,*,#4702,.T.);+#4702 = EDGE_CURVE('',#4680,#4703,#4705,.T.);+#4703 = VERTEX_POINT('',#4704);+#4704 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#4705 = SURFACE_CURVE('',#4706,(#4710,#4717),.PCURVE_S1.);+#4706 = LINE('',#4707,#4708);+#4707 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#4708 = VECTOR('',#4709,1.);+#4709 = DIRECTION('',(-1.,0.,0.));+#4710 = PCURVE('',#4663,#4711);+#4711 = DEFINITIONAL_REPRESENTATION('',(#4712),#4716);+#4712 = LINE('',#4713,#4714);+#4713 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#4714 = VECTOR('',#4715,1.);+#4715 = DIRECTION('',(0.,-1.));+#4716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4717 = PCURVE('',#4718,#4723);+#4718 = PLANE('',#4719);+#4719 = AXIS2_PLACEMENT_3D('',#4720,#4721,#4722);+#4720 = CARTESIAN_POINT('',(-2.6375,-0.975,0.15));+#4721 = DIRECTION('',(-0.,-0.,-1.));+#4722 = DIRECTION('',(-1.,0.,0.));+#4723 = DEFINITIONAL_REPRESENTATION('',(#4724),#4728);+#4724 = LINE('',#4725,#4726);+#4725 = CARTESIAN_POINT('',(0.,0.15));+#4726 = VECTOR('',#4727,1.);+#4727 = DIRECTION('',(1.,0.));+#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4729 = ORIENTED_EDGE('',*,*,#4730,.T.);+#4730 = EDGE_CURVE('',#4703,#4731,#4733,.T.);+#4731 = VERTEX_POINT('',#4732);+#4732 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#4733 = SURFACE_CURVE('',#4734,(#4738,#4745),.PCURVE_S1.);+#4734 = LINE('',#4735,#4736);+#4735 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#4736 = VECTOR('',#4737,1.);+#4737 = DIRECTION('',(0.,0.,-1.));+#4738 = PCURVE('',#4663,#4739);+#4739 = DEFINITIONAL_REPRESENTATION('',(#4740),#4744);+#4740 = LINE('',#4741,#4742);+#4741 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#4742 = VECTOR('',#4743,1.);+#4743 = DIRECTION('',(1.,0.));+#4744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4745 = PCURVE('',#4746,#4751);+#4746 = PLANE('',#4747);+#4747 = AXIS2_PLACEMENT_3D('',#4748,#4749,#4750);+#4748 = CARTESIAN_POINT('',(-3.205,-0.975,0.15));+#4749 = DIRECTION('',(1.,0.,0.));+#4750 = DIRECTION('',(0.,0.,-1.));+#4751 = DEFINITIONAL_REPRESENTATION('',(#4752),#4756);+#4752 = LINE('',#4753,#4754);+#4753 = CARTESIAN_POINT('',(0.,0.15));+#4754 = VECTOR('',#4755,1.);+#4755 = DIRECTION('',(1.,0.));+#4756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4757 = ORIENTED_EDGE('',*,*,#4758,.T.);+#4758 = EDGE_CURVE('',#4731,#4759,#4761,.T.);+#4759 = VERTEX_POINT('',#4760);+#4760 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4761 = SURFACE_CURVE('',#4762,(#4766,#4773),.PCURVE_S1.);+#4762 = LINE('',#4763,#4764);+#4763 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#4764 = VECTOR('',#4765,1.);+#4765 = DIRECTION('',(1.,0.,0.));+#4766 = PCURVE('',#4663,#4767);+#4767 = DEFINITIONAL_REPRESENTATION('',(#4768),#4772);+#4768 = LINE('',#4769,#4770);+#4769 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4770 = VECTOR('',#4771,1.);+#4771 = DIRECTION('',(0.,1.));+#4772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4773 = PCURVE('',#4774,#4779);+#4774 = PLANE('',#4775);+#4775 = AXIS2_PLACEMENT_3D('',#4776,#4777,#4778);+#4776 = CARTESIAN_POINT('',(-3.205,-0.975,0.));+#4777 = DIRECTION('',(-0.,0.,1.));+#4778 = DIRECTION('',(1.,0.,0.));+#4779 = DEFINITIONAL_REPRESENTATION('',(#4780),#4784);+#4780 = LINE('',#4781,#4782);+#4781 = CARTESIAN_POINT('',(0.,0.15));+#4782 = VECTOR('',#4783,1.);+#4783 = DIRECTION('',(1.,0.));+#4784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4785 = ORIENTED_EDGE('',*,*,#4786,.T.);+#4786 = EDGE_CURVE('',#4759,#4787,#4789,.T.);+#4787 = VERTEX_POINT('',#4788);+#4788 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#4789 = SURFACE_CURVE('',#4790,(#4794,#4801),.PCURVE_S1.);+#4790 = LINE('',#4791,#4792);+#4791 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4792 = VECTOR('',#4793,1.);+#4793 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4794 = PCURVE('',#4663,#4795);+#4795 = DEFINITIONAL_REPRESENTATION('',(#4796),#4800);+#4796 = LINE('',#4797,#4798);+#4797 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#4798 = VECTOR('',#4799,1.);+#4799 = DIRECTION('',(-0.839949759337,0.542664170358));+#4800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4801 = PCURVE('',#4802,#4807);+#4802 = PLANE('',#4803);+#4803 = AXIS2_PLACEMENT_3D('',#4804,#4805,#4806);+#4804 = CARTESIAN_POINT('',(-2.4875,-0.975,0.));+#4805 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#4806 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4807 = DEFINITIONAL_REPRESENTATION('',(#4808),#4812);+#4808 = LINE('',#4809,#4810);+#4809 = CARTESIAN_POINT('',(0.,0.15));+#4810 = VECTOR('',#4811,1.);+#4811 = DIRECTION('',(1.,0.));+#4812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4813 = ORIENTED_EDGE('',*,*,#4814,.T.);+#4814 = EDGE_CURVE('',#4787,#4815,#4817,.T.);+#4815 = VERTEX_POINT('',#4816);+#4816 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#4817 = SURFACE_CURVE('',#4818,(#4822,#4829),.PCURVE_S1.);+#4818 = LINE('',#4819,#4820);+#4819 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));+#4820 = VECTOR('',#4821,1.);+#4821 = DIRECTION('',(1.,0.,0.));+#4822 = PCURVE('',#4663,#4823);+#4823 = DEFINITIONAL_REPRESENTATION('',(#4824),#4828);+#4824 = LINE('',#4825,#4826);+#4825 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4826 = VECTOR('',#4827,1.);+#4827 = DIRECTION('',(0.,1.));+#4828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4829 = PCURVE('',#4830,#4835);+#4830 = PLANE('',#4831);+#4831 = AXIS2_PLACEMENT_3D('',#4832,#4833,#4834);+#4832 = CARTESIAN_POINT('',(-2.2,-0.975,0.445));+#4833 = DIRECTION('',(-0.,0.,1.));+#4834 = DIRECTION('',(1.,0.,0.));+#4835 = DEFINITIONAL_REPRESENTATION('',(#4836),#4840); #4836 = LINE('',#4837,#4838);-#4837 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#4837 = CARTESIAN_POINT('',(0.,0.15)); #4838 = VECTOR('',#4839,1.);-#4839 = DIRECTION('',(-1.,0.,0.));-#4840 = PCURVE('',#4609,#4841);-#4841 = DEFINITIONAL_REPRESENTATION('',(#4842),#4846);-#4842 = LINE('',#4843,#4844);-#4843 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#4844 = VECTOR('',#4845,1.);-#4845 = DIRECTION('',(0.,-1.));-#4846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4847 = PCURVE('',#4793,#4848);-#4848 = DEFINITIONAL_REPRESENTATION('',(#4849),#4853);-#4849 = LINE('',#4850,#4851);-#4850 = CARTESIAN_POINT('',(0.,-0.15));-#4851 = VECTOR('',#4852,1.);-#4852 = DIRECTION('',(1.,0.));-#4853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4854 = ORIENTED_EDGE('',*,*,#4855,.T.);-#4855 = EDGE_CURVE('',#4833,#4856,#4858,.T.);-#4856 = VERTEX_POINT('',#4857);-#4857 = CARTESIAN_POINT('',(-3.205,-1.125,0.));-#4858 = SURFACE_CURVE('',#4859,(#4863,#4870),.PCURVE_S1.);-#4859 = LINE('',#4860,#4861);-#4860 = CARTESIAN_POINT('',(-3.205,-1.125,0.15));-#4861 = VECTOR('',#4862,1.);-#4862 = DIRECTION('',(0.,0.,-1.));-#4863 = PCURVE('',#4609,#4864);-#4864 = DEFINITIONAL_REPRESENTATION('',(#4865),#4869);-#4865 = LINE('',#4866,#4867);-#4866 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#4867 = VECTOR('',#4868,1.);-#4868 = DIRECTION('',(1.,0.));-#4869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4870 = PCURVE('',#4871,#4876);-#4871 = PLANE('',#4872);-#4872 = AXIS2_PLACEMENT_3D('',#4873,#4874,#4875);-#4873 = CARTESIAN_POINT('',(-3.205,-0.975,0.15));-#4874 = DIRECTION('',(1.,0.,0.));-#4875 = DIRECTION('',(0.,0.,-1.));-#4876 = DEFINITIONAL_REPRESENTATION('',(#4877),#4881);-#4877 = LINE('',#4878,#4879);-#4878 = CARTESIAN_POINT('',(0.,-0.15));-#4879 = VECTOR('',#4880,1.);-#4880 = DIRECTION('',(1.,0.));-#4881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4882 = ORIENTED_EDGE('',*,*,#4883,.T.);-#4883 = EDGE_CURVE('',#4856,#4884,#4886,.T.);-#4884 = VERTEX_POINT('',#4885);-#4885 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));-#4886 = SURFACE_CURVE('',#4887,(#4891,#4898),.PCURVE_S1.);-#4887 = LINE('',#4888,#4889);-#4888 = CARTESIAN_POINT('',(-3.205,-1.125,0.));-#4889 = VECTOR('',#4890,1.);-#4890 = DIRECTION('',(1.,0.,0.));-#4891 = PCURVE('',#4609,#4892);-#4892 = DEFINITIONAL_REPRESENTATION('',(#4893),#4897);+#4839 = DIRECTION('',(1.,0.));+#4840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4841 = ORIENTED_EDGE('',*,*,#4842,.T.);+#4842 = EDGE_CURVE('',#4815,#4561,#4843,.T.);+#4843 = SURFACE_CURVE('',#4844,(#4848,#4855),.PCURVE_S1.);+#4844 = LINE('',#4845,#4846);+#4845 = CARTESIAN_POINT('',(-2.15,-0.825,0.445));+#4846 = VECTOR('',#4847,1.);+#4847 = DIRECTION('',(0.,0.,1.));+#4848 = PCURVE('',#4663,#4849);+#4849 = DEFINITIONAL_REPRESENTATION('',(#4850),#4854);+#4850 = LINE('',#4851,#4852);+#4851 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#4852 = VECTOR('',#4853,1.);+#4853 = DIRECTION('',(-1.,0.));+#4854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4855 = PCURVE('',#4581,#4856);+#4856 = DEFINITIONAL_REPRESENTATION('',(#4857),#4861);+#4857 = LINE('',#4858,#4859);+#4858 = CARTESIAN_POINT('',(0.,0.15));+#4859 = VECTOR('',#4860,1.);+#4860 = DIRECTION('',(1.,0.));+#4861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4862 = ADVANCED_FACE('',(#4863),#4830,.F.);+#4863 = FACE_BOUND('',#4864,.F.);+#4864 = EDGE_LOOP('',(#4865,#4888,#4911,#4932));+#4865 = ORIENTED_EDGE('',*,*,#4866,.F.);+#4866 = EDGE_CURVE('',#4867,#4787,#4869,.T.);+#4867 = VERTEX_POINT('',#4868);+#4868 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4869 = SURFACE_CURVE('',#4870,(#4874,#4881),.PCURVE_S1.);+#4870 = LINE('',#4871,#4872);+#4871 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4872 = VECTOR('',#4873,1.);+#4873 = DIRECTION('',(0.,1.,0.));+#4874 = PCURVE('',#4830,#4875);+#4875 = DEFINITIONAL_REPRESENTATION('',(#4876),#4880);+#4876 = LINE('',#4877,#4878);+#4877 = CARTESIAN_POINT('',(0.,-0.15));+#4878 = VECTOR('',#4879,1.);+#4879 = DIRECTION('',(0.,1.));+#4880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4881 = PCURVE('',#4802,#4882);+#4882 = DEFINITIONAL_REPRESENTATION('',(#4883),#4887);+#4883 = LINE('',#4884,#4885);+#4884 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#4885 = VECTOR('',#4886,1.);+#4886 = DIRECTION('',(0.,1.));+#4887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4888 = ORIENTED_EDGE('',*,*,#4889,.T.);+#4889 = EDGE_CURVE('',#4867,#4890,#4892,.T.);+#4890 = VERTEX_POINT('',#4891);+#4891 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#4892 = SURFACE_CURVE('',#4893,(#4897,#4904),.PCURVE_S1.); #4893 = LINE('',#4894,#4895);-#4894 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#4894 = CARTESIAN_POINT('',(-2.2,-1.125,0.445)); #4895 = VECTOR('',#4896,1.);-#4896 = DIRECTION('',(0.,1.));-#4897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4898 = PCURVE('',#4899,#4904);-#4899 = PLANE('',#4900);-#4900 = AXIS2_PLACEMENT_3D('',#4901,#4902,#4903);-#4901 = CARTESIAN_POINT('',(-3.205,-0.975,0.));-#4902 = DIRECTION('',(-0.,0.,1.));-#4903 = DIRECTION('',(1.,0.,0.));-#4904 = DEFINITIONAL_REPRESENTATION('',(#4905),#4909);-#4905 = LINE('',#4906,#4907);-#4906 = CARTESIAN_POINT('',(0.,-0.15));-#4907 = VECTOR('',#4908,1.);-#4908 = DIRECTION('',(1.,0.));-#4909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4910 = ORIENTED_EDGE('',*,*,#4911,.T.);-#4911 = EDGE_CURVE('',#4884,#4912,#4914,.T.);-#4912 = VERTEX_POINT('',#4913);-#4913 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));-#4914 = SURFACE_CURVE('',#4915,(#4919,#4926),.PCURVE_S1.);-#4915 = LINE('',#4916,#4917);-#4916 = CARTESIAN_POINT('',(-2.4875,-1.125,0.));-#4917 = VECTOR('',#4918,1.);-#4918 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#4919 = PCURVE('',#4609,#4920);-#4920 = DEFINITIONAL_REPRESENTATION('',(#4921),#4925);-#4921 = LINE('',#4922,#4923);-#4922 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#4923 = VECTOR('',#4924,1.);-#4924 = DIRECTION('',(-0.839949759337,0.542664170358));-#4925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4926 = PCURVE('',#4927,#4932);-#4927 = PLANE('',#4928);-#4928 = AXIS2_PLACEMENT_3D('',#4929,#4930,#4931);-#4929 = CARTESIAN_POINT('',(-2.4875,-0.975,0.));-#4930 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#4931 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#4932 = DEFINITIONAL_REPRESENTATION('',(#4933),#4937);-#4933 = LINE('',#4934,#4935);-#4934 = CARTESIAN_POINT('',(0.,-0.15));-#4935 = VECTOR('',#4936,1.);-#4936 = DIRECTION('',(1.,0.));-#4937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4938 = ORIENTED_EDGE('',*,*,#4939,.T.);-#4939 = EDGE_CURVE('',#4912,#4679,#4940,.T.);+#4896 = DIRECTION('',(1.,0.,0.));+#4897 = PCURVE('',#4830,#4898);+#4898 = DEFINITIONAL_REPRESENTATION('',(#4899),#4903);+#4899 = LINE('',#4900,#4901);+#4900 = CARTESIAN_POINT('',(0.,-0.15));+#4901 = VECTOR('',#4902,1.);+#4902 = DIRECTION('',(1.,0.));+#4903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4904 = PCURVE('',#4609,#4905);+#4905 = DEFINITIONAL_REPRESENTATION('',(#4906),#4910);+#4906 = LINE('',#4907,#4908);+#4907 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4908 = VECTOR('',#4909,1.);+#4909 = DIRECTION('',(0.,1.));+#4910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4911 = ORIENTED_EDGE('',*,*,#4912,.T.);+#4912 = EDGE_CURVE('',#4890,#4815,#4913,.T.);+#4913 = SURFACE_CURVE('',#4914,(#4918,#4925),.PCURVE_S1.);+#4914 = LINE('',#4915,#4916);+#4915 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#4916 = VECTOR('',#4917,1.);+#4917 = DIRECTION('',(0.,1.,0.));+#4918 = PCURVE('',#4830,#4919);+#4919 = DEFINITIONAL_REPRESENTATION('',(#4920),#4924);+#4920 = LINE('',#4921,#4922);+#4921 = CARTESIAN_POINT('',(5.E-02,-0.15));+#4922 = VECTOR('',#4923,1.);+#4923 = DIRECTION('',(0.,1.));+#4924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4925 = PCURVE('',#4581,#4926);+#4926 = DEFINITIONAL_REPRESENTATION('',(#4927),#4931);+#4927 = LINE('',#4928,#4929);+#4928 = CARTESIAN_POINT('',(0.,-0.15));+#4929 = VECTOR('',#4930,1.);+#4930 = DIRECTION('',(0.,1.));+#4931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4932 = ORIENTED_EDGE('',*,*,#4814,.F.);+#4933 = ADVANCED_FACE('',(#4934),#4802,.F.);+#4934 = FACE_BOUND('',#4935,.F.);+#4935 = EDGE_LOOP('',(#4936,#4959,#4960,#4961));+#4936 = ORIENTED_EDGE('',*,*,#4937,.T.);+#4937 = EDGE_CURVE('',#4938,#4867,#4940,.T.);+#4938 = VERTEX_POINT('',#4939);+#4939 = CARTESIAN_POINT('',(-2.4875,-1.125,0.)); #4940 = SURFACE_CURVE('',#4941,(#4945,#4952),.PCURVE_S1.); #4941 = LINE('',#4942,#4943);-#4942 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));+#4942 = CARTESIAN_POINT('',(-2.4875,-1.125,0.)); #4943 = VECTOR('',#4944,1.);-#4944 = DIRECTION('',(1.,0.,0.));-#4945 = PCURVE('',#4609,#4946);+#4944 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#4945 = PCURVE('',#4802,#4946); #4946 = DEFINITIONAL_REPRESENTATION('',(#4947),#4951); #4947 = LINE('',#4948,#4949);-#4948 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#4948 = CARTESIAN_POINT('',(0.,-0.15)); #4949 = VECTOR('',#4950,1.);-#4950 = DIRECTION('',(0.,1.));+#4950 = DIRECTION('',(1.,0.)); #4951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4952 = PCURVE('',#4696,#4953);+#4952 = PCURVE('',#4609,#4953); #4953 = DEFINITIONAL_REPRESENTATION('',(#4954),#4958); #4954 = LINE('',#4955,#4956);-#4955 = CARTESIAN_POINT('',(0.,-0.15));+#4955 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #4956 = VECTOR('',#4957,1.);-#4957 = DIRECTION('',(1.,0.));+#4957 = DIRECTION('',(-0.839949759337,0.542664170358)); #4958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4959 = ORIENTED_EDGE('',*,*,#4708,.T.);-#4960 = ADVANCED_FACE('',(#4961),#4696,.F.);-#4961 = FACE_BOUND('',#4962,.F.);-#4962 = EDGE_LOOP('',(#4963,#4986,#4987,#4988));-#4963 = ORIENTED_EDGE('',*,*,#4964,.F.);-#4964 = EDGE_CURVE('',#4912,#4965,#4967,.T.);-#4965 = VERTEX_POINT('',#4966);-#4966 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));-#4967 = SURFACE_CURVE('',#4968,(#4972,#4979),.PCURVE_S1.);-#4968 = LINE('',#4969,#4970);-#4969 = CARTESIAN_POINT('',(-2.2,-1.125,0.445));-#4970 = VECTOR('',#4971,1.);-#4971 = DIRECTION('',(0.,1.,0.));-#4972 = PCURVE('',#4696,#4973);-#4973 = DEFINITIONAL_REPRESENTATION('',(#4974),#4978);-#4974 = LINE('',#4975,#4976);-#4975 = CARTESIAN_POINT('',(0.,-0.15));-#4976 = VECTOR('',#4977,1.);-#4977 = DIRECTION('',(0.,1.));-#4978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4979 = PCURVE('',#4927,#4980);-#4980 = DEFINITIONAL_REPRESENTATION('',(#4981),#4985);-#4981 = LINE('',#4982,#4983);-#4982 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#4983 = VECTOR('',#4984,1.);-#4984 = DIRECTION('',(0.,1.));-#4985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4986 = ORIENTED_EDGE('',*,*,#4939,.T.);-#4987 = ORIENTED_EDGE('',*,*,#4678,.T.);-#4988 = ORIENTED_EDGE('',*,*,#4989,.F.);-#4989 = EDGE_CURVE('',#4965,#4681,#4990,.T.);-#4990 = SURFACE_CURVE('',#4991,(#4995,#5002),.PCURVE_S1.);-#4991 = LINE('',#4992,#4993);-#4992 = CARTESIAN_POINT('',(-2.2,-0.825,0.445));-#4993 = VECTOR('',#4994,1.);-#4994 = DIRECTION('',(1.,0.,0.));-#4995 = PCURVE('',#4696,#4996);-#4996 = DEFINITIONAL_REPRESENTATION('',(#4997),#5001);-#4997 = LINE('',#4998,#4999);-#4998 = CARTESIAN_POINT('',(0.,0.15));-#4999 = VECTOR('',#5000,1.);-#5000 = DIRECTION('',(1.,0.));-#5001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5002 = PCURVE('',#4663,#5003);-#5003 = DEFINITIONAL_REPRESENTATION('',(#5004),#5008);-#5004 = LINE('',#5005,#5006);-#5005 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#5006 = VECTOR('',#5007,1.);-#5007 = DIRECTION('',(0.,1.));-#5008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5009 = ADVANCED_FACE('',(#5010),#4793,.F.);-#5010 = FACE_BOUND('',#5011,.F.);-#5011 = EDGE_LOOP('',(#5012,#5013,#5036,#5057));-#5012 = ORIENTED_EDGE('',*,*,#4832,.T.);-#5013 = ORIENTED_EDGE('',*,*,#5014,.F.);-#5014 = EDGE_CURVE('',#5015,#4833,#5017,.T.);-#5015 = VERTEX_POINT('',#5016);-#5016 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#5017 = SURFACE_CURVE('',#5018,(#5022,#5029),.PCURVE_S1.);-#5018 = LINE('',#5019,#5020);-#5019 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#5020 = VECTOR('',#5021,1.);-#5021 = DIRECTION('',(0.,-1.,0.));-#5022 = PCURVE('',#4793,#5023);-#5023 = DEFINITIONAL_REPRESENTATION('',(#5024),#5028);-#5024 = LINE('',#5025,#5026);-#5025 = CARTESIAN_POINT('',(0.5675,0.15));-#5026 = VECTOR('',#5027,1.);-#5027 = DIRECTION('',(0.,-1.));-#5028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5029 = PCURVE('',#4871,#5030);-#5030 = DEFINITIONAL_REPRESENTATION('',(#5031),#5035);-#5031 = LINE('',#5032,#5033);-#5032 = CARTESIAN_POINT('',(0.,0.15));-#5033 = VECTOR('',#5034,1.);-#5034 = DIRECTION('',(0.,-1.));-#5035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5036 = ORIENTED_EDGE('',*,*,#5037,.F.);-#5037 = EDGE_CURVE('',#4778,#5015,#5038,.T.);+#4959 = ORIENTED_EDGE('',*,*,#4866,.T.);+#4960 = ORIENTED_EDGE('',*,*,#4786,.F.);+#4961 = ORIENTED_EDGE('',*,*,#4962,.T.);+#4962 = EDGE_CURVE('',#4759,#4938,#4963,.T.);+#4963 = SURFACE_CURVE('',#4964,(#4968,#4975),.PCURVE_S1.);+#4964 = LINE('',#4965,#4966);+#4965 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));+#4966 = VECTOR('',#4967,1.);+#4967 = DIRECTION('',(0.,-1.,0.));+#4968 = PCURVE('',#4802,#4969);+#4969 = DEFINITIONAL_REPRESENTATION('',(#4970),#4974);+#4970 = LINE('',#4971,#4972);+#4971 = CARTESIAN_POINT('',(0.,0.15));+#4972 = VECTOR('',#4973,1.);+#4973 = DIRECTION('',(0.,-1.));+#4974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4975 = PCURVE('',#4774,#4976);+#4976 = DEFINITIONAL_REPRESENTATION('',(#4977),#4981);+#4977 = LINE('',#4978,#4979);+#4978 = CARTESIAN_POINT('',(0.7175,0.15));+#4979 = VECTOR('',#4980,1.);+#4980 = DIRECTION('',(0.,-1.));+#4981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4982 = ADVANCED_FACE('',(#4983),#4774,.F.);+#4983 = FACE_BOUND('',#4984,.F.);+#4984 = EDGE_LOOP('',(#4985,#5008,#5009,#5010));+#4985 = ORIENTED_EDGE('',*,*,#4986,.T.);+#4986 = EDGE_CURVE('',#4987,#4938,#4989,.T.);+#4987 = VERTEX_POINT('',#4988);+#4988 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#4989 = SURFACE_CURVE('',#4990,(#4994,#5001),.PCURVE_S1.);+#4990 = LINE('',#4991,#4992);+#4991 = CARTESIAN_POINT('',(-3.205,-1.125,0.));+#4992 = VECTOR('',#4993,1.);+#4993 = DIRECTION('',(1.,0.,0.));+#4994 = PCURVE('',#4774,#4995);+#4995 = DEFINITIONAL_REPRESENTATION('',(#4996),#5000);+#4996 = LINE('',#4997,#4998);+#4997 = CARTESIAN_POINT('',(0.,-0.15));+#4998 = VECTOR('',#4999,1.);+#4999 = DIRECTION('',(1.,0.));+#5000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5001 = PCURVE('',#4609,#5002);+#5002 = DEFINITIONAL_REPRESENTATION('',(#5003),#5007);+#5003 = LINE('',#5004,#5005);+#5004 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5005 = VECTOR('',#5006,1.);+#5006 = DIRECTION('',(0.,1.));+#5007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5008 = ORIENTED_EDGE('',*,*,#4962,.F.);+#5009 = ORIENTED_EDGE('',*,*,#4758,.F.);+#5010 = ORIENTED_EDGE('',*,*,#5011,.T.);+#5011 = EDGE_CURVE('',#4731,#4987,#5012,.T.);+#5012 = SURFACE_CURVE('',#5013,(#5017,#5024),.PCURVE_S1.);+#5013 = LINE('',#5014,#5015);+#5014 = CARTESIAN_POINT('',(-3.205,-0.825,0.));+#5015 = VECTOR('',#5016,1.);+#5016 = DIRECTION('',(0.,-1.,0.));+#5017 = PCURVE('',#4774,#5018);+#5018 = DEFINITIONAL_REPRESENTATION('',(#5019),#5023);+#5019 = LINE('',#5020,#5021);+#5020 = CARTESIAN_POINT('',(0.,0.15));+#5021 = VECTOR('',#5022,1.);+#5022 = DIRECTION('',(0.,-1.));+#5023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5024 = PCURVE('',#4746,#5025);+#5025 = DEFINITIONAL_REPRESENTATION('',(#5026),#5030);+#5026 = LINE('',#5027,#5028);+#5027 = CARTESIAN_POINT('',(0.15,0.15));+#5028 = VECTOR('',#5029,1.);+#5029 = DIRECTION('',(0.,-1.));+#5030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5031 = ADVANCED_FACE('',(#5032),#4746,.F.);+#5032 = FACE_BOUND('',#5033,.F.);+#5033 = EDGE_LOOP('',(#5034,#5057,#5058,#5059));+#5034 = ORIENTED_EDGE('',*,*,#5035,.T.);+#5035 = EDGE_CURVE('',#5036,#4987,#5038,.T.);+#5036 = VERTEX_POINT('',#5037);+#5037 = CARTESIAN_POINT('',(-3.205,-1.125,0.15)); #5038 = SURFACE_CURVE('',#5039,(#5043,#5050),.PCURVE_S1.); #5039 = LINE('',#5040,#5041);-#5040 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#5040 = CARTESIAN_POINT('',(-3.205,-1.125,0.15)); #5041 = VECTOR('',#5042,1.);-#5042 = DIRECTION('',(-1.,0.,0.));-#5043 = PCURVE('',#4793,#5044);+#5042 = DIRECTION('',(0.,0.,-1.));+#5043 = PCURVE('',#4746,#5044); #5044 = DEFINITIONAL_REPRESENTATION('',(#5045),#5049); #5045 = LINE('',#5046,#5047);-#5046 = CARTESIAN_POINT('',(0.,0.15));+#5046 = CARTESIAN_POINT('',(0.,-0.15)); #5047 = VECTOR('',#5048,1.); #5048 = DIRECTION('',(1.,0.)); #5049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5050 = PCURVE('',#4663,#5051);+#5050 = PCURVE('',#4609,#5051); #5051 = DEFINITIONAL_REPRESENTATION('',(#5052),#5056); #5052 = LINE('',#5053,#5054);-#5053 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5053 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #5054 = VECTOR('',#5055,1.);-#5055 = DIRECTION('',(0.,-1.));+#5055 = DIRECTION('',(1.,0.)); #5056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5057 = ORIENTED_EDGE('',*,*,#4777,.T.);-#5058 = ADVANCED_FACE('',(#5059),#4663,.F.);-#5059 = FACE_BOUND('',#5060,.F.);-#5060 = EDGE_LOOP('',(#5061,#5062,#5063,#5064,#5087,#5110,#5131,#5132));-#5061 = ORIENTED_EDGE('',*,*,#4649,.T.);-#5062 = ORIENTED_EDGE('',*,*,#4805,.T.);-#5063 = ORIENTED_EDGE('',*,*,#5037,.T.);-#5064 = ORIENTED_EDGE('',*,*,#5065,.T.);-#5065 = EDGE_CURVE('',#5015,#5066,#5068,.T.);-#5066 = VERTEX_POINT('',#5067);-#5067 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#5068 = SURFACE_CURVE('',#5069,(#5073,#5080),.PCURVE_S1.);-#5069 = LINE('',#5070,#5071);-#5070 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));-#5071 = VECTOR('',#5072,1.);-#5072 = DIRECTION('',(0.,0.,-1.));-#5073 = PCURVE('',#4663,#5074);+#5057 = ORIENTED_EDGE('',*,*,#5011,.F.);+#5058 = ORIENTED_EDGE('',*,*,#4730,.F.);+#5059 = ORIENTED_EDGE('',*,*,#5060,.T.);+#5060 = EDGE_CURVE('',#4703,#5036,#5061,.T.);+#5061 = SURFACE_CURVE('',#5062,(#5066,#5073),.PCURVE_S1.);+#5062 = LINE('',#5063,#5064);+#5063 = CARTESIAN_POINT('',(-3.205,-0.825,0.15));+#5064 = VECTOR('',#5065,1.);+#5065 = DIRECTION('',(0.,-1.,0.));+#5066 = PCURVE('',#4746,#5067);+#5067 = DEFINITIONAL_REPRESENTATION('',(#5068),#5072);+#5068 = LINE('',#5069,#5070);+#5069 = CARTESIAN_POINT('',(0.,0.15));+#5070 = VECTOR('',#5071,1.);+#5071 = DIRECTION('',(0.,-1.));+#5072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5073 = PCURVE('',#4718,#5074); #5074 = DEFINITIONAL_REPRESENTATION('',(#5075),#5079); #5075 = LINE('',#5076,#5077);-#5076 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5076 = CARTESIAN_POINT('',(0.5675,0.15)); #5077 = VECTOR('',#5078,1.);-#5078 = DIRECTION('',(1.,0.));+#5078 = DIRECTION('',(0.,-1.)); #5079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5080 = PCURVE('',#4871,#5081);-#5081 = DEFINITIONAL_REPRESENTATION('',(#5082),#5086);-#5082 = LINE('',#5083,#5084);-#5083 = CARTESIAN_POINT('',(0.,0.15));-#5084 = VECTOR('',#5085,1.);-#5085 = DIRECTION('',(1.,0.));-#5086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5087 = ORIENTED_EDGE('',*,*,#5088,.T.);-#5088 = EDGE_CURVE('',#5066,#5089,#5091,.T.);-#5089 = VERTEX_POINT('',#5090);-#5090 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#5091 = SURFACE_CURVE('',#5092,(#5096,#5103),.PCURVE_S1.);-#5092 = LINE('',#5093,#5094);-#5093 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#5094 = VECTOR('',#5095,1.);-#5095 = DIRECTION('',(1.,0.,0.));-#5096 = PCURVE('',#4663,#5097);-#5097 = DEFINITIONAL_REPRESENTATION('',(#5098),#5102);-#5098 = LINE('',#5099,#5100);-#5099 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#5100 = VECTOR('',#5101,1.);-#5101 = DIRECTION('',(0.,1.));-#5102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5103 = PCURVE('',#4899,#5104);-#5104 = DEFINITIONAL_REPRESENTATION('',(#5105),#5109);-#5105 = LINE('',#5106,#5107);-#5106 = CARTESIAN_POINT('',(0.,0.15));-#5107 = VECTOR('',#5108,1.);-#5108 = DIRECTION('',(1.,0.));-#5109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5110 = ORIENTED_EDGE('',*,*,#5111,.T.);-#5111 = EDGE_CURVE('',#5089,#4965,#5112,.T.);-#5112 = SURFACE_CURVE('',#5113,(#5117,#5124),.PCURVE_S1.);-#5113 = LINE('',#5114,#5115);-#5114 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#5115 = VECTOR('',#5116,1.);-#5116 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#5117 = PCURVE('',#4663,#5118);-#5118 = DEFINITIONAL_REPRESENTATION('',(#5119),#5123);-#5119 = LINE('',#5120,#5121);-#5120 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#5121 = VECTOR('',#5122,1.);-#5122 = DIRECTION('',(-0.839949759337,0.542664170358));-#5123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5124 = PCURVE('',#4927,#5125);-#5125 = DEFINITIONAL_REPRESENTATION('',(#5126),#5130);-#5126 = LINE('',#5127,#5128);-#5127 = CARTESIAN_POINT('',(0.,0.15));-#5128 = VECTOR('',#5129,1.);-#5129 = DIRECTION('',(1.,0.));-#5130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5131 = ORIENTED_EDGE('',*,*,#4989,.T.);-#5132 = ORIENTED_EDGE('',*,*,#4730,.T.);-#5133 = ADVANCED_FACE('',(#5134),#4871,.F.);-#5134 = FACE_BOUND('',#5135,.F.);-#5135 = EDGE_LOOP('',(#5136,#5137,#5158,#5159));-#5136 = ORIENTED_EDGE('',*,*,#4855,.T.);-#5137 = ORIENTED_EDGE('',*,*,#5138,.F.);-#5138 = EDGE_CURVE('',#5066,#4856,#5139,.T.);-#5139 = SURFACE_CURVE('',#5140,(#5144,#5151),.PCURVE_S1.);-#5140 = LINE('',#5141,#5142);-#5141 = CARTESIAN_POINT('',(-3.205,-0.825,0.));-#5142 = VECTOR('',#5143,1.);-#5143 = DIRECTION('',(0.,-1.,0.));-#5144 = PCURVE('',#4871,#5145);-#5145 = DEFINITIONAL_REPRESENTATION('',(#5146),#5150);-#5146 = LINE('',#5147,#5148);-#5147 = CARTESIAN_POINT('',(0.15,0.15));-#5148 = VECTOR('',#5149,1.);-#5149 = DIRECTION('',(0.,-1.));-#5150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5151 = PCURVE('',#4899,#5152);-#5152 = DEFINITIONAL_REPRESENTATION('',(#5153),#5157);-#5153 = LINE('',#5154,#5155);-#5154 = CARTESIAN_POINT('',(0.,0.15));-#5155 = VECTOR('',#5156,1.);-#5156 = DIRECTION('',(0.,-1.));-#5157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5158 = ORIENTED_EDGE('',*,*,#5065,.F.);-#5159 = ORIENTED_EDGE('',*,*,#5014,.T.);-#5160 = ADVANCED_FACE('',(#5161),#4899,.F.);-#5161 = FACE_BOUND('',#5162,.F.);-#5162 = EDGE_LOOP('',(#5163,#5164,#5185,#5186));-#5163 = ORIENTED_EDGE('',*,*,#4883,.T.);-#5164 = ORIENTED_EDGE('',*,*,#5165,.F.);-#5165 = EDGE_CURVE('',#5089,#4884,#5166,.T.);-#5166 = SURFACE_CURVE('',#5167,(#5171,#5178),.PCURVE_S1.);-#5167 = LINE('',#5168,#5169);-#5168 = CARTESIAN_POINT('',(-2.4875,-0.825,0.));-#5169 = VECTOR('',#5170,1.);-#5170 = DIRECTION('',(0.,-1.,0.));-#5171 = PCURVE('',#4899,#5172);-#5172 = DEFINITIONAL_REPRESENTATION('',(#5173),#5177);-#5173 = LINE('',#5174,#5175);-#5174 = CARTESIAN_POINT('',(0.7175,0.15));-#5175 = VECTOR('',#5176,1.);-#5176 = DIRECTION('',(0.,-1.));-#5177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5178 = PCURVE('',#4927,#5179);-#5179 = DEFINITIONAL_REPRESENTATION('',(#5180),#5184);-#5180 = LINE('',#5181,#5182);-#5181 = CARTESIAN_POINT('',(0.,0.15));-#5182 = VECTOR('',#5183,1.);-#5183 = DIRECTION('',(0.,-1.));-#5184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5185 = ORIENTED_EDGE('',*,*,#5088,.F.);-#5186 = ORIENTED_EDGE('',*,*,#5138,.T.);-#5187 = ADVANCED_FACE('',(#5188),#4927,.F.);+#5080 = ADVANCED_FACE('',(#5081),#4718,.F.);+#5081 = FACE_BOUND('',#5082,.F.);+#5082 = EDGE_LOOP('',(#5083,#5106,#5107,#5108));+#5083 = ORIENTED_EDGE('',*,*,#5084,.T.);+#5084 = EDGE_CURVE('',#5085,#5036,#5087,.T.);+#5085 = VERTEX_POINT('',#5086);+#5086 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#5087 = SURFACE_CURVE('',#5088,(#5092,#5099),.PCURVE_S1.);+#5088 = LINE('',#5089,#5090);+#5089 = CARTESIAN_POINT('',(-2.6375,-1.125,0.15));+#5090 = VECTOR('',#5091,1.);+#5091 = DIRECTION('',(-1.,0.,0.));+#5092 = PCURVE('',#4718,#5093);+#5093 = DEFINITIONAL_REPRESENTATION('',(#5094),#5098);+#5094 = LINE('',#5095,#5096);+#5095 = CARTESIAN_POINT('',(0.,-0.15));+#5096 = VECTOR('',#5097,1.);+#5097 = DIRECTION('',(1.,0.));+#5098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5099 = PCURVE('',#4609,#5100);+#5100 = DEFINITIONAL_REPRESENTATION('',(#5101),#5105);+#5101 = LINE('',#5102,#5103);+#5102 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5103 = VECTOR('',#5104,1.);+#5104 = DIRECTION('',(0.,-1.));+#5105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5106 = ORIENTED_EDGE('',*,*,#5060,.F.);+#5107 = ORIENTED_EDGE('',*,*,#4702,.F.);+#5108 = ORIENTED_EDGE('',*,*,#5109,.T.);+#5109 = EDGE_CURVE('',#4680,#5085,#5110,.T.);+#5110 = SURFACE_CURVE('',#5111,(#5115,#5122),.PCURVE_S1.);+#5111 = LINE('',#5112,#5113);+#5112 = CARTESIAN_POINT('',(-2.6375,-0.825,0.15));+#5113 = VECTOR('',#5114,1.);+#5114 = DIRECTION('',(0.,-1.,0.));+#5115 = PCURVE('',#4718,#5116);+#5116 = DEFINITIONAL_REPRESENTATION('',(#5117),#5121);+#5117 = LINE('',#5118,#5119);+#5118 = CARTESIAN_POINT('',(0.,0.15));+#5119 = VECTOR('',#5120,1.);+#5120 = DIRECTION('',(0.,-1.));+#5121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5122 = PCURVE('',#4637,#5123);+#5123 = DEFINITIONAL_REPRESENTATION('',(#5124),#5128);+#5124 = LINE('',#5125,#5126);+#5125 = CARTESIAN_POINT('',(0.529793591883,0.15));+#5126 = VECTOR('',#5127,1.);+#5127 = DIRECTION('',(-0.,-1.));+#5128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5129 = ADVANCED_FACE('',(#5130),#4637,.F.);+#5130 = FACE_BOUND('',#5131,.F.);+#5131 = EDGE_LOOP('',(#5132,#5153,#5154,#5155));+#5132 = ORIENTED_EDGE('',*,*,#5133,.T.);+#5133 = EDGE_CURVE('',#4594,#5085,#5134,.T.);+#5134 = SURFACE_CURVE('',#5135,(#5139,#5146),.PCURVE_S1.);+#5135 = LINE('',#5136,#5137);+#5136 = CARTESIAN_POINT('',(-2.35,-1.125,0.595));+#5137 = VECTOR('',#5138,1.);+#5138 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5139 = PCURVE('',#4637,#5140);+#5140 = DEFINITIONAL_REPRESENTATION('',(#5141),#5145);+#5141 = LINE('',#5142,#5143);+#5142 = CARTESIAN_POINT('',(-0.,-0.15));+#5143 = VECTOR('',#5144,1.);+#5144 = DIRECTION('',(1.,0.));+#5145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5146 = PCURVE('',#4609,#5147);+#5147 = DEFINITIONAL_REPRESENTATION('',(#5148),#5152);+#5148 = LINE('',#5149,#5150);+#5149 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5150 = VECTOR('',#5151,1.);+#5151 = DIRECTION('',(0.839949759337,-0.542664170358));+#5152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5153 = ORIENTED_EDGE('',*,*,#5109,.F.);+#5154 = ORIENTED_EDGE('',*,*,#4679,.F.);+#5155 = ORIENTED_EDGE('',*,*,#4621,.T.);+#5156 = ADVANCED_FACE('',(#5157),#4609,.T.);+#5157 = FACE_BOUND('',#5158,.T.);+#5158 = EDGE_LOOP('',(#5159,#5160,#5161,#5162,#5163,#5164,#5165,#5166));+#5159 = ORIENTED_EDGE('',*,*,#4593,.T.);+#5160 = ORIENTED_EDGE('',*,*,#5133,.T.);+#5161 = ORIENTED_EDGE('',*,*,#5084,.T.);+#5162 = ORIENTED_EDGE('',*,*,#5035,.T.);+#5163 = ORIENTED_EDGE('',*,*,#4986,.T.);+#5164 = ORIENTED_EDGE('',*,*,#4937,.T.);+#5165 = ORIENTED_EDGE('',*,*,#4889,.T.);+#5166 = ORIENTED_EDGE('',*,*,#5167,.T.);+#5167 = EDGE_CURVE('',#4890,#4559,#5168,.T.);+#5168 = SURFACE_CURVE('',#5169,(#5173,#5180),.PCURVE_S1.);+#5169 = LINE('',#5170,#5171);+#5170 = CARTESIAN_POINT('',(-2.15,-1.125,0.445));+#5171 = VECTOR('',#5172,1.);+#5172 = DIRECTION('',(0.,0.,1.));+#5173 = PCURVE('',#4609,#5174);+#5174 = DEFINITIONAL_REPRESENTATION('',(#5175),#5179);+#5175 = LINE('',#5176,#5177);+#5176 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5177 = VECTOR('',#5178,1.);+#5178 = DIRECTION('',(-1.,0.));+#5179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5180 = PCURVE('',#4581,#5181);+#5181 = DEFINITIONAL_REPRESENTATION('',(#5182),#5186);+#5182 = LINE('',#5183,#5184);+#5183 = CARTESIAN_POINT('',(0.,-0.15));+#5184 = VECTOR('',#5185,1.);+#5185 = DIRECTION('',(1.,0.));+#5186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5187 = ADVANCED_FACE('',(#5188),#4581,.F.); #5188 = FACE_BOUND('',#5189,.F.); #5189 = EDGE_LOOP('',(#5190,#5191,#5192,#5193));-#5190 = ORIENTED_EDGE('',*,*,#4911,.T.);-#5191 = ORIENTED_EDGE('',*,*,#4964,.T.);-#5192 = ORIENTED_EDGE('',*,*,#5111,.F.);-#5193 = ORIENTED_EDGE('',*,*,#5165,.T.);+#5190 = ORIENTED_EDGE('',*,*,#4912,.F.);+#5191 = ORIENTED_EDGE('',*,*,#5167,.T.);+#5192 = ORIENTED_EDGE('',*,*,#4558,.T.);+#5193 = ORIENTED_EDGE('',*,*,#4842,.F.); #5194 = MANIFOLD_SOLID_BREP('',#5195);-#5195 = CLOSED_SHELL('',(#5196,#5316,#5392,#5468,#5602,#5651,#5700,#5775- ,#5802,#5829));+#5195 = CLOSED_SHELL('',(#5196,#5316,#5504,#5575,#5624,#5673,#5722,#5771+ ,#5798,#5829)); #5196 = ADVANCED_FACE('',(#5197),#5211,.F.); #5197 = FACE_BOUND('',#5198,.F.); #5198 = EDGE_LOOP('',(#5199,#5234,#5262,#5290));@@ -6134,609 +6134,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #5315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5316 = ADVANCED_FACE('',(#5317),#5223,.F.);+#5316 = ADVANCED_FACE('',(#5317),#5305,.F.); #5317 = FACE_BOUND('',#5318,.F.);-#5318 = EDGE_LOOP('',(#5319,#5349,#5370,#5371));-#5319 = ORIENTED_EDGE('',*,*,#5320,.F.);-#5320 = EDGE_CURVE('',#5321,#5323,#5325,.T.);-#5321 = VERTEX_POINT('',#5322);-#5322 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#5323 = VERTEX_POINT('',#5324);-#5324 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));-#5325 = SURFACE_CURVE('',#5326,(#5330,#5337),.PCURVE_S1.);-#5326 = LINE('',#5327,#5328);-#5327 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#5328 = VECTOR('',#5329,1.);-#5329 = DIRECTION('',(0.,1.,0.));-#5330 = PCURVE('',#5223,#5331);-#5331 = DEFINITIONAL_REPRESENTATION('',(#5332),#5336);-#5332 = LINE('',#5333,#5334);-#5333 = CARTESIAN_POINT('',(0.,-0.15));-#5334 = VECTOR('',#5335,1.);-#5335 = DIRECTION('',(0.,1.));-#5336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5337 = PCURVE('',#5338,#5343);-#5338 = PLANE('',#5339);-#5339 = AXIS2_PLACEMENT_3D('',#5340,#5341,#5342);-#5340 = CARTESIAN_POINT('',(-2.2,-1.625,0.445));-#5341 = DIRECTION('',(-0.,0.,1.));-#5342 = DIRECTION('',(1.,0.,0.));-#5343 = DEFINITIONAL_REPRESENTATION('',(#5344),#5348);-#5344 = LINE('',#5345,#5346);-#5345 = CARTESIAN_POINT('',(5.E-02,-0.15));-#5346 = VECTOR('',#5347,1.);-#5347 = DIRECTION('',(0.,1.));-#5348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5349 = ORIENTED_EDGE('',*,*,#5350,.T.);-#5350 = EDGE_CURVE('',#5321,#5201,#5351,.T.);-#5351 = SURFACE_CURVE('',#5352,(#5356,#5363),.PCURVE_S1.);-#5352 = LINE('',#5353,#5354);-#5353 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));-#5354 = VECTOR('',#5355,1.);-#5355 = DIRECTION('',(0.,0.,1.));-#5356 = PCURVE('',#5223,#5357);-#5357 = DEFINITIONAL_REPRESENTATION('',(#5358),#5362);-#5358 = LINE('',#5359,#5360);-#5359 = CARTESIAN_POINT('',(0.,-0.15));-#5360 = VECTOR('',#5361,1.);-#5361 = DIRECTION('',(1.,0.));-#5362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5363 = PCURVE('',#5251,#5364);-#5364 = DEFINITIONAL_REPRESENTATION('',(#5365),#5369);-#5365 = LINE('',#5366,#5367);-#5366 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#5367 = VECTOR('',#5368,1.);-#5368 = DIRECTION('',(-1.,0.));-#5369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5370 = ORIENTED_EDGE('',*,*,#5200,.T.);-#5371 = ORIENTED_EDGE('',*,*,#5372,.F.);-#5372 = EDGE_CURVE('',#5323,#5203,#5373,.T.);-#5373 = SURFACE_CURVE('',#5374,(#5378,#5385),.PCURVE_S1.);-#5374 = LINE('',#5375,#5376);-#5375 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));-#5376 = VECTOR('',#5377,1.);-#5377 = DIRECTION('',(0.,0.,1.));-#5378 = PCURVE('',#5223,#5379);-#5379 = DEFINITIONAL_REPRESENTATION('',(#5380),#5384);-#5380 = LINE('',#5381,#5382);-#5381 = CARTESIAN_POINT('',(0.,0.15));-#5382 = VECTOR('',#5383,1.);-#5383 = DIRECTION('',(1.,0.));-#5384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5385 = PCURVE('',#5305,#5386);-#5386 = DEFINITIONAL_REPRESENTATION('',(#5387),#5391);-#5387 = LINE('',#5388,#5389);-#5388 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#5389 = VECTOR('',#5390,1.);-#5390 = DIRECTION('',(-1.,0.));-#5391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5392 = ADVANCED_FACE('',(#5393),#5279,.F.);-#5393 = FACE_BOUND('',#5394,.F.);-#5394 = EDGE_LOOP('',(#5395,#5418,#5446,#5467));-#5395 = ORIENTED_EDGE('',*,*,#5396,.T.);-#5396 = EDGE_CURVE('',#5236,#5397,#5399,.T.);-#5397 = VERTEX_POINT('',#5398);-#5398 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));-#5399 = SURFACE_CURVE('',#5400,(#5404,#5411),.PCURVE_S1.);-#5400 = LINE('',#5401,#5402);-#5401 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));-#5402 = VECTOR('',#5403,1.);-#5403 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#5404 = PCURVE('',#5279,#5405);-#5405 = DEFINITIONAL_REPRESENTATION('',(#5406),#5410);-#5406 = LINE('',#5407,#5408);-#5407 = CARTESIAN_POINT('',(-0.,-0.15));-#5408 = VECTOR('',#5409,1.);-#5409 = DIRECTION('',(1.,0.));-#5410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5411 = PCURVE('',#5251,#5412);-#5412 = DEFINITIONAL_REPRESENTATION('',(#5413),#5417);-#5413 = LINE('',#5414,#5415);-#5414 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#5415 = VECTOR('',#5416,1.);-#5416 = DIRECTION('',(0.839949759337,-0.542664170358));-#5417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5418 = ORIENTED_EDGE('',*,*,#5419,.F.);-#5419 = EDGE_CURVE('',#5420,#5397,#5422,.T.);-#5420 = VERTEX_POINT('',#5421);-#5421 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));-#5422 = SURFACE_CURVE('',#5423,(#5427,#5434),.PCURVE_S1.);-#5423 = LINE('',#5424,#5425);-#5424 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));-#5425 = VECTOR('',#5426,1.);-#5426 = DIRECTION('',(0.,-1.,0.));-#5427 = PCURVE('',#5279,#5428);-#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5433);-#5429 = LINE('',#5430,#5431);-#5430 = CARTESIAN_POINT('',(0.529793591883,0.15));-#5431 = VECTOR('',#5432,1.);-#5432 = DIRECTION('',(-0.,-1.));-#5433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5434 = PCURVE('',#5435,#5440);-#5435 = PLANE('',#5436);-#5436 = AXIS2_PLACEMENT_3D('',#5437,#5438,#5439);-#5437 = CARTESIAN_POINT('',(-2.6375,-1.625,0.15));-#5438 = DIRECTION('',(-0.,-0.,-1.));-#5439 = DIRECTION('',(-1.,0.,0.));-#5440 = DEFINITIONAL_REPRESENTATION('',(#5441),#5445);-#5441 = LINE('',#5442,#5443);-#5442 = CARTESIAN_POINT('',(0.,0.15));-#5443 = VECTOR('',#5444,1.);-#5444 = DIRECTION('',(0.,-1.));-#5445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5446 = ORIENTED_EDGE('',*,*,#5447,.F.);-#5447 = EDGE_CURVE('',#5264,#5420,#5448,.T.);-#5448 = SURFACE_CURVE('',#5449,(#5453,#5460),.PCURVE_S1.);-#5449 = LINE('',#5450,#5451);-#5450 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));-#5451 = VECTOR('',#5452,1.);-#5452 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#5453 = PCURVE('',#5279,#5454);-#5454 = DEFINITIONAL_REPRESENTATION('',(#5455),#5459);-#5455 = LINE('',#5456,#5457);-#5456 = CARTESIAN_POINT('',(0.,0.15));-#5457 = VECTOR('',#5458,1.);-#5458 = DIRECTION('',(1.,0.));-#5459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5460 = PCURVE('',#5305,#5461);-#5461 = DEFINITIONAL_REPRESENTATION('',(#5462),#5466);-#5462 = LINE('',#5463,#5464);-#5463 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#5464 = VECTOR('',#5465,1.);-#5465 = DIRECTION('',(0.839949759337,-0.542664170358));-#5466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5467 = ORIENTED_EDGE('',*,*,#5263,.T.);-#5468 = ADVANCED_FACE('',(#5469),#5251,.T.);-#5469 = FACE_BOUND('',#5470,.T.);-#5470 = EDGE_LOOP('',(#5471,#5472,#5473,#5496,#5524,#5552,#5580,#5601));-#5471 = ORIENTED_EDGE('',*,*,#5235,.T.);-#5472 = ORIENTED_EDGE('',*,*,#5396,.T.);-#5473 = ORIENTED_EDGE('',*,*,#5474,.T.);-#5474 = EDGE_CURVE('',#5397,#5475,#5477,.T.);-#5475 = VERTEX_POINT('',#5476);-#5476 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));-#5477 = SURFACE_CURVE('',#5478,(#5482,#5489),.PCURVE_S1.);+#5318 = EDGE_LOOP('',(#5319,#5320,#5343,#5371,#5399,#5427,#5455,#5483));+#5319 = ORIENTED_EDGE('',*,*,#5291,.T.);+#5320 = ORIENTED_EDGE('',*,*,#5321,.T.);+#5321 = EDGE_CURVE('',#5264,#5322,#5324,.T.);+#5322 = VERTEX_POINT('',#5323);+#5323 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5324 = SURFACE_CURVE('',#5325,(#5329,#5336),.PCURVE_S1.);+#5325 = LINE('',#5326,#5327);+#5326 = CARTESIAN_POINT('',(-2.35,-1.475,0.595));+#5327 = VECTOR('',#5328,1.);+#5328 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5329 = PCURVE('',#5305,#5330);+#5330 = DEFINITIONAL_REPRESENTATION('',(#5331),#5335);+#5331 = LINE('',#5332,#5333);+#5332 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5333 = VECTOR('',#5334,1.);+#5334 = DIRECTION('',(0.839949759337,-0.542664170358));+#5335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5336 = PCURVE('',#5279,#5337);+#5337 = DEFINITIONAL_REPRESENTATION('',(#5338),#5342);+#5338 = LINE('',#5339,#5340);+#5339 = CARTESIAN_POINT('',(0.,0.15));+#5340 = VECTOR('',#5341,1.);+#5341 = DIRECTION('',(1.,0.));+#5342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5343 = ORIENTED_EDGE('',*,*,#5344,.T.);+#5344 = EDGE_CURVE('',#5322,#5345,#5347,.T.);+#5345 = VERTEX_POINT('',#5346);+#5346 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5347 = SURFACE_CURVE('',#5348,(#5352,#5359),.PCURVE_S1.);+#5348 = LINE('',#5349,#5350);+#5349 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5350 = VECTOR('',#5351,1.);+#5351 = DIRECTION('',(-1.,0.,0.));+#5352 = PCURVE('',#5305,#5353);+#5353 = DEFINITIONAL_REPRESENTATION('',(#5354),#5358);+#5354 = LINE('',#5355,#5356);+#5355 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5356 = VECTOR('',#5357,1.);+#5357 = DIRECTION('',(0.,-1.));+#5358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5359 = PCURVE('',#5360,#5365);+#5360 = PLANE('',#5361);+#5361 = AXIS2_PLACEMENT_3D('',#5362,#5363,#5364);+#5362 = CARTESIAN_POINT('',(-2.6375,-1.625,0.15));+#5363 = DIRECTION('',(-0.,-0.,-1.));+#5364 = DIRECTION('',(-1.,0.,0.));+#5365 = DEFINITIONAL_REPRESENTATION('',(#5366),#5370);+#5366 = LINE('',#5367,#5368);+#5367 = CARTESIAN_POINT('',(0.,0.15));+#5368 = VECTOR('',#5369,1.);+#5369 = DIRECTION('',(1.,0.));+#5370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5371 = ORIENTED_EDGE('',*,*,#5372,.T.);+#5372 = EDGE_CURVE('',#5345,#5373,#5375,.T.);+#5373 = VERTEX_POINT('',#5374);+#5374 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5375 = SURFACE_CURVE('',#5376,(#5380,#5387),.PCURVE_S1.);+#5376 = LINE('',#5377,#5378);+#5377 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5378 = VECTOR('',#5379,1.);+#5379 = DIRECTION('',(0.,0.,-1.));+#5380 = PCURVE('',#5305,#5381);+#5381 = DEFINITIONAL_REPRESENTATION('',(#5382),#5386);+#5382 = LINE('',#5383,#5384);+#5383 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5384 = VECTOR('',#5385,1.);+#5385 = DIRECTION('',(1.,0.));+#5386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5387 = PCURVE('',#5388,#5393);+#5388 = PLANE('',#5389);+#5389 = AXIS2_PLACEMENT_3D('',#5390,#5391,#5392);+#5390 = CARTESIAN_POINT('',(-3.205,-1.625,0.15));+#5391 = DIRECTION('',(1.,0.,0.));+#5392 = DIRECTION('',(0.,0.,-1.));+#5393 = DEFINITIONAL_REPRESENTATION('',(#5394),#5398);+#5394 = LINE('',#5395,#5396);+#5395 = CARTESIAN_POINT('',(0.,0.15));+#5396 = VECTOR('',#5397,1.);+#5397 = DIRECTION('',(1.,0.));+#5398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5399 = ORIENTED_EDGE('',*,*,#5400,.T.);+#5400 = EDGE_CURVE('',#5373,#5401,#5403,.T.);+#5401 = VERTEX_POINT('',#5402);+#5402 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5403 = SURFACE_CURVE('',#5404,(#5408,#5415),.PCURVE_S1.);+#5404 = LINE('',#5405,#5406);+#5405 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5406 = VECTOR('',#5407,1.);+#5407 = DIRECTION('',(1.,0.,0.));+#5408 = PCURVE('',#5305,#5409);+#5409 = DEFINITIONAL_REPRESENTATION('',(#5410),#5414);+#5410 = LINE('',#5411,#5412);+#5411 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5412 = VECTOR('',#5413,1.);+#5413 = DIRECTION('',(0.,1.));+#5414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5415 = PCURVE('',#5416,#5421);+#5416 = PLANE('',#5417);+#5417 = AXIS2_PLACEMENT_3D('',#5418,#5419,#5420);+#5418 = CARTESIAN_POINT('',(-3.205,-1.625,0.));+#5419 = DIRECTION('',(-0.,0.,1.));+#5420 = DIRECTION('',(1.,0.,0.));+#5421 = DEFINITIONAL_REPRESENTATION('',(#5422),#5426);+#5422 = LINE('',#5423,#5424);+#5423 = CARTESIAN_POINT('',(0.,0.15));+#5424 = VECTOR('',#5425,1.);+#5425 = DIRECTION('',(1.,0.));+#5426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5427 = ORIENTED_EDGE('',*,*,#5428,.T.);+#5428 = EDGE_CURVE('',#5401,#5429,#5431,.T.);+#5429 = VERTEX_POINT('',#5430);+#5430 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#5431 = SURFACE_CURVE('',#5432,(#5436,#5443),.PCURVE_S1.);+#5432 = LINE('',#5433,#5434);+#5433 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5434 = VECTOR('',#5435,1.);+#5435 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5436 = PCURVE('',#5305,#5437);+#5437 = DEFINITIONAL_REPRESENTATION('',(#5438),#5442);+#5438 = LINE('',#5439,#5440);+#5439 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#5440 = VECTOR('',#5441,1.);+#5441 = DIRECTION('',(-0.839949759337,0.542664170358));+#5442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5443 = PCURVE('',#5444,#5449);+#5444 = PLANE('',#5445);+#5445 = AXIS2_PLACEMENT_3D('',#5446,#5447,#5448);+#5446 = CARTESIAN_POINT('',(-2.4875,-1.625,0.));+#5447 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#5448 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5449 = DEFINITIONAL_REPRESENTATION('',(#5450),#5454);+#5450 = LINE('',#5451,#5452);+#5451 = CARTESIAN_POINT('',(0.,0.15));+#5452 = VECTOR('',#5453,1.);+#5453 = DIRECTION('',(1.,0.));+#5454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5455 = ORIENTED_EDGE('',*,*,#5456,.T.);+#5456 = EDGE_CURVE('',#5429,#5457,#5459,.T.);+#5457 = VERTEX_POINT('',#5458);+#5458 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#5459 = SURFACE_CURVE('',#5460,(#5464,#5471),.PCURVE_S1.);+#5460 = LINE('',#5461,#5462);+#5461 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));+#5462 = VECTOR('',#5463,1.);+#5463 = DIRECTION('',(1.,0.,0.));+#5464 = PCURVE('',#5305,#5465);+#5465 = DEFINITIONAL_REPRESENTATION('',(#5466),#5470);+#5466 = LINE('',#5467,#5468);+#5467 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#5468 = VECTOR('',#5469,1.);+#5469 = DIRECTION('',(0.,1.));+#5470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5471 = PCURVE('',#5472,#5477);+#5472 = PLANE('',#5473);+#5473 = AXIS2_PLACEMENT_3D('',#5474,#5475,#5476);+#5474 = CARTESIAN_POINT('',(-2.2,-1.625,0.445));+#5475 = DIRECTION('',(-0.,0.,1.));+#5476 = DIRECTION('',(1.,0.,0.));+#5477 = DEFINITIONAL_REPRESENTATION('',(#5478),#5482); #5478 = LINE('',#5479,#5480);-#5479 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#5479 = CARTESIAN_POINT('',(0.,0.15)); #5480 = VECTOR('',#5481,1.);-#5481 = DIRECTION('',(-1.,0.,0.));-#5482 = PCURVE('',#5251,#5483);-#5483 = DEFINITIONAL_REPRESENTATION('',(#5484),#5488);-#5484 = LINE('',#5485,#5486);-#5485 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#5486 = VECTOR('',#5487,1.);-#5487 = DIRECTION('',(0.,-1.));-#5488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5489 = PCURVE('',#5435,#5490);-#5490 = DEFINITIONAL_REPRESENTATION('',(#5491),#5495);-#5491 = LINE('',#5492,#5493);-#5492 = CARTESIAN_POINT('',(0.,-0.15));-#5493 = VECTOR('',#5494,1.);-#5494 = DIRECTION('',(1.,0.));-#5495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5496 = ORIENTED_EDGE('',*,*,#5497,.T.);-#5497 = EDGE_CURVE('',#5475,#5498,#5500,.T.);-#5498 = VERTEX_POINT('',#5499);-#5499 = CARTESIAN_POINT('',(-3.205,-1.775,0.));-#5500 = SURFACE_CURVE('',#5501,(#5505,#5512),.PCURVE_S1.);-#5501 = LINE('',#5502,#5503);-#5502 = CARTESIAN_POINT('',(-3.205,-1.775,0.15));-#5503 = VECTOR('',#5504,1.);-#5504 = DIRECTION('',(0.,0.,-1.));-#5505 = PCURVE('',#5251,#5506);-#5506 = DEFINITIONAL_REPRESENTATION('',(#5507),#5511);-#5507 = LINE('',#5508,#5509);-#5508 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#5509 = VECTOR('',#5510,1.);-#5510 = DIRECTION('',(1.,0.));-#5511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5512 = PCURVE('',#5513,#5518);-#5513 = PLANE('',#5514);-#5514 = AXIS2_PLACEMENT_3D('',#5515,#5516,#5517);-#5515 = CARTESIAN_POINT('',(-3.205,-1.625,0.15));-#5516 = DIRECTION('',(1.,0.,0.));-#5517 = DIRECTION('',(0.,0.,-1.));-#5518 = DEFINITIONAL_REPRESENTATION('',(#5519),#5523);-#5519 = LINE('',#5520,#5521);-#5520 = CARTESIAN_POINT('',(0.,-0.15));-#5521 = VECTOR('',#5522,1.);-#5522 = DIRECTION('',(1.,0.));-#5523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5524 = ORIENTED_EDGE('',*,*,#5525,.T.);-#5525 = EDGE_CURVE('',#5498,#5526,#5528,.T.);-#5526 = VERTEX_POINT('',#5527);-#5527 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));-#5528 = SURFACE_CURVE('',#5529,(#5533,#5540),.PCURVE_S1.);-#5529 = LINE('',#5530,#5531);-#5530 = CARTESIAN_POINT('',(-3.205,-1.775,0.));-#5531 = VECTOR('',#5532,1.);-#5532 = DIRECTION('',(1.,0.,0.));-#5533 = PCURVE('',#5251,#5534);-#5534 = DEFINITIONAL_REPRESENTATION('',(#5535),#5539);+#5481 = DIRECTION('',(1.,0.));+#5482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5483 = ORIENTED_EDGE('',*,*,#5484,.T.);+#5484 = EDGE_CURVE('',#5457,#5203,#5485,.T.);+#5485 = SURFACE_CURVE('',#5486,(#5490,#5497),.PCURVE_S1.);+#5486 = LINE('',#5487,#5488);+#5487 = CARTESIAN_POINT('',(-2.15,-1.475,0.445));+#5488 = VECTOR('',#5489,1.);+#5489 = DIRECTION('',(0.,0.,1.));+#5490 = PCURVE('',#5305,#5491);+#5491 = DEFINITIONAL_REPRESENTATION('',(#5492),#5496);+#5492 = LINE('',#5493,#5494);+#5493 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5494 = VECTOR('',#5495,1.);+#5495 = DIRECTION('',(-1.,0.));+#5496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5497 = PCURVE('',#5223,#5498);+#5498 = DEFINITIONAL_REPRESENTATION('',(#5499),#5503);+#5499 = LINE('',#5500,#5501);+#5500 = CARTESIAN_POINT('',(0.,0.15));+#5501 = VECTOR('',#5502,1.);+#5502 = DIRECTION('',(1.,0.));+#5503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5504 = ADVANCED_FACE('',(#5505),#5472,.F.);+#5505 = FACE_BOUND('',#5506,.F.);+#5506 = EDGE_LOOP('',(#5507,#5530,#5553,#5574));+#5507 = ORIENTED_EDGE('',*,*,#5508,.F.);+#5508 = EDGE_CURVE('',#5509,#5429,#5511,.T.);+#5509 = VERTEX_POINT('',#5510);+#5510 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5511 = SURFACE_CURVE('',#5512,(#5516,#5523),.PCURVE_S1.);+#5512 = LINE('',#5513,#5514);+#5513 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5514 = VECTOR('',#5515,1.);+#5515 = DIRECTION('',(0.,1.,0.));+#5516 = PCURVE('',#5472,#5517);+#5517 = DEFINITIONAL_REPRESENTATION('',(#5518),#5522);+#5518 = LINE('',#5519,#5520);+#5519 = CARTESIAN_POINT('',(0.,-0.15));+#5520 = VECTOR('',#5521,1.);+#5521 = DIRECTION('',(0.,1.));+#5522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5523 = PCURVE('',#5444,#5524);+#5524 = DEFINITIONAL_REPRESENTATION('',(#5525),#5529);+#5525 = LINE('',#5526,#5527);+#5526 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#5527 = VECTOR('',#5528,1.);+#5528 = DIRECTION('',(0.,1.));+#5529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5530 = ORIENTED_EDGE('',*,*,#5531,.T.);+#5531 = EDGE_CURVE('',#5509,#5532,#5534,.T.);+#5532 = VERTEX_POINT('',#5533);+#5533 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5534 = SURFACE_CURVE('',#5535,(#5539,#5546),.PCURVE_S1.); #5535 = LINE('',#5536,#5537);-#5536 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5536 = CARTESIAN_POINT('',(-2.2,-1.775,0.445)); #5537 = VECTOR('',#5538,1.);-#5538 = DIRECTION('',(0.,1.));-#5539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5540 = PCURVE('',#5541,#5546);-#5541 = PLANE('',#5542);-#5542 = AXIS2_PLACEMENT_3D('',#5543,#5544,#5545);-#5543 = CARTESIAN_POINT('',(-3.205,-1.625,0.));-#5544 = DIRECTION('',(-0.,0.,1.));-#5545 = DIRECTION('',(1.,0.,0.));-#5546 = DEFINITIONAL_REPRESENTATION('',(#5547),#5551);-#5547 = LINE('',#5548,#5549);-#5548 = CARTESIAN_POINT('',(0.,-0.15));-#5549 = VECTOR('',#5550,1.);-#5550 = DIRECTION('',(1.,0.));-#5551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5552 = ORIENTED_EDGE('',*,*,#5553,.T.);-#5553 = EDGE_CURVE('',#5526,#5554,#5556,.T.);-#5554 = VERTEX_POINT('',#5555);-#5555 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));-#5556 = SURFACE_CURVE('',#5557,(#5561,#5568),.PCURVE_S1.);-#5557 = LINE('',#5558,#5559);-#5558 = CARTESIAN_POINT('',(-2.4875,-1.775,0.));-#5559 = VECTOR('',#5560,1.);-#5560 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#5561 = PCURVE('',#5251,#5562);-#5562 = DEFINITIONAL_REPRESENTATION('',(#5563),#5567);-#5563 = LINE('',#5564,#5565);-#5564 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#5565 = VECTOR('',#5566,1.);-#5566 = DIRECTION('',(-0.839949759337,0.542664170358));-#5567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5568 = PCURVE('',#5569,#5574);-#5569 = PLANE('',#5570);-#5570 = AXIS2_PLACEMENT_3D('',#5571,#5572,#5573);-#5571 = CARTESIAN_POINT('',(-2.4875,-1.625,0.));-#5572 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#5573 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#5574 = DEFINITIONAL_REPRESENTATION('',(#5575),#5579);-#5575 = LINE('',#5576,#5577);-#5576 = CARTESIAN_POINT('',(0.,-0.15));-#5577 = VECTOR('',#5578,1.);-#5578 = DIRECTION('',(1.,0.));-#5579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5580 = ORIENTED_EDGE('',*,*,#5581,.T.);-#5581 = EDGE_CURVE('',#5554,#5321,#5582,.T.);+#5538 = DIRECTION('',(1.,0.,0.));+#5539 = PCURVE('',#5472,#5540);+#5540 = DEFINITIONAL_REPRESENTATION('',(#5541),#5545);+#5541 = LINE('',#5542,#5543);+#5542 = CARTESIAN_POINT('',(0.,-0.15));+#5543 = VECTOR('',#5544,1.);+#5544 = DIRECTION('',(1.,0.));+#5545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5546 = PCURVE('',#5251,#5547);+#5547 = DEFINITIONAL_REPRESENTATION('',(#5548),#5552);+#5548 = LINE('',#5549,#5550);+#5549 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#5550 = VECTOR('',#5551,1.);+#5551 = DIRECTION('',(0.,1.));+#5552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5553 = ORIENTED_EDGE('',*,*,#5554,.T.);+#5554 = EDGE_CURVE('',#5532,#5457,#5555,.T.);+#5555 = SURFACE_CURVE('',#5556,(#5560,#5567),.PCURVE_S1.);+#5556 = LINE('',#5557,#5558);+#5557 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5558 = VECTOR('',#5559,1.);+#5559 = DIRECTION('',(0.,1.,0.));+#5560 = PCURVE('',#5472,#5561);+#5561 = DEFINITIONAL_REPRESENTATION('',(#5562),#5566);+#5562 = LINE('',#5563,#5564);+#5563 = CARTESIAN_POINT('',(5.E-02,-0.15));+#5564 = VECTOR('',#5565,1.);+#5565 = DIRECTION('',(0.,1.));+#5566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5567 = PCURVE('',#5223,#5568);+#5568 = DEFINITIONAL_REPRESENTATION('',(#5569),#5573);+#5569 = LINE('',#5570,#5571);+#5570 = CARTESIAN_POINT('',(0.,-0.15));+#5571 = VECTOR('',#5572,1.);+#5572 = DIRECTION('',(0.,1.));+#5573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5574 = ORIENTED_EDGE('',*,*,#5456,.F.);+#5575 = ADVANCED_FACE('',(#5576),#5444,.F.);+#5576 = FACE_BOUND('',#5577,.F.);+#5577 = EDGE_LOOP('',(#5578,#5601,#5602,#5603));+#5578 = ORIENTED_EDGE('',*,*,#5579,.T.);+#5579 = EDGE_CURVE('',#5580,#5509,#5582,.T.);+#5580 = VERTEX_POINT('',#5581);+#5581 = CARTESIAN_POINT('',(-2.4875,-1.775,0.)); #5582 = SURFACE_CURVE('',#5583,(#5587,#5594),.PCURVE_S1.); #5583 = LINE('',#5584,#5585);-#5584 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));+#5584 = CARTESIAN_POINT('',(-2.4875,-1.775,0.)); #5585 = VECTOR('',#5586,1.);-#5586 = DIRECTION('',(1.,0.,0.));-#5587 = PCURVE('',#5251,#5588);+#5586 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#5587 = PCURVE('',#5444,#5588); #5588 = DEFINITIONAL_REPRESENTATION('',(#5589),#5593); #5589 = LINE('',#5590,#5591);-#5590 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#5590 = CARTESIAN_POINT('',(0.,-0.15)); #5591 = VECTOR('',#5592,1.);-#5592 = DIRECTION('',(0.,1.));+#5592 = DIRECTION('',(1.,0.)); #5593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5594 = PCURVE('',#5338,#5595);+#5594 = PCURVE('',#5251,#5595); #5595 = DEFINITIONAL_REPRESENTATION('',(#5596),#5600); #5596 = LINE('',#5597,#5598);-#5597 = CARTESIAN_POINT('',(0.,-0.15));+#5597 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #5598 = VECTOR('',#5599,1.);-#5599 = DIRECTION('',(1.,0.));+#5599 = DIRECTION('',(-0.839949759337,0.542664170358)); #5600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5601 = ORIENTED_EDGE('',*,*,#5350,.T.);-#5602 = ADVANCED_FACE('',(#5603),#5338,.F.);-#5603 = FACE_BOUND('',#5604,.F.);-#5604 = EDGE_LOOP('',(#5605,#5628,#5629,#5630));-#5605 = ORIENTED_EDGE('',*,*,#5606,.F.);-#5606 = EDGE_CURVE('',#5554,#5607,#5609,.T.);-#5607 = VERTEX_POINT('',#5608);-#5608 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));-#5609 = SURFACE_CURVE('',#5610,(#5614,#5621),.PCURVE_S1.);-#5610 = LINE('',#5611,#5612);-#5611 = CARTESIAN_POINT('',(-2.2,-1.775,0.445));-#5612 = VECTOR('',#5613,1.);-#5613 = DIRECTION('',(0.,1.,0.));-#5614 = PCURVE('',#5338,#5615);-#5615 = DEFINITIONAL_REPRESENTATION('',(#5616),#5620);-#5616 = LINE('',#5617,#5618);-#5617 = CARTESIAN_POINT('',(0.,-0.15));-#5618 = VECTOR('',#5619,1.);-#5619 = DIRECTION('',(0.,1.));-#5620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5621 = PCURVE('',#5569,#5622);-#5622 = DEFINITIONAL_REPRESENTATION('',(#5623),#5627);-#5623 = LINE('',#5624,#5625);-#5624 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#5625 = VECTOR('',#5626,1.);-#5626 = DIRECTION('',(0.,1.));-#5627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5628 = ORIENTED_EDGE('',*,*,#5581,.T.);-#5629 = ORIENTED_EDGE('',*,*,#5320,.T.);-#5630 = ORIENTED_EDGE('',*,*,#5631,.F.);-#5631 = EDGE_CURVE('',#5607,#5323,#5632,.T.);-#5632 = SURFACE_CURVE('',#5633,(#5637,#5644),.PCURVE_S1.);-#5633 = LINE('',#5634,#5635);-#5634 = CARTESIAN_POINT('',(-2.2,-1.475,0.445));-#5635 = VECTOR('',#5636,1.);-#5636 = DIRECTION('',(1.,0.,0.));-#5637 = PCURVE('',#5338,#5638);-#5638 = DEFINITIONAL_REPRESENTATION('',(#5639),#5643);-#5639 = LINE('',#5640,#5641);-#5640 = CARTESIAN_POINT('',(0.,0.15));-#5641 = VECTOR('',#5642,1.);-#5642 = DIRECTION('',(1.,0.));-#5643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5644 = PCURVE('',#5305,#5645);-#5645 = DEFINITIONAL_REPRESENTATION('',(#5646),#5650);-#5646 = LINE('',#5647,#5648);-#5647 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#5648 = VECTOR('',#5649,1.);-#5649 = DIRECTION('',(0.,1.));-#5650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5651 = ADVANCED_FACE('',(#5652),#5435,.F.);-#5652 = FACE_BOUND('',#5653,.F.);-#5653 = EDGE_LOOP('',(#5654,#5655,#5678,#5699));-#5654 = ORIENTED_EDGE('',*,*,#5474,.T.);-#5655 = ORIENTED_EDGE('',*,*,#5656,.F.);-#5656 = EDGE_CURVE('',#5657,#5475,#5659,.T.);-#5657 = VERTEX_POINT('',#5658);-#5658 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#5659 = SURFACE_CURVE('',#5660,(#5664,#5671),.PCURVE_S1.);-#5660 = LINE('',#5661,#5662);-#5661 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#5662 = VECTOR('',#5663,1.);-#5663 = DIRECTION('',(0.,-1.,0.));-#5664 = PCURVE('',#5435,#5665);-#5665 = DEFINITIONAL_REPRESENTATION('',(#5666),#5670);-#5666 = LINE('',#5667,#5668);-#5667 = CARTESIAN_POINT('',(0.5675,0.15));-#5668 = VECTOR('',#5669,1.);-#5669 = DIRECTION('',(0.,-1.));-#5670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5671 = PCURVE('',#5513,#5672);-#5672 = DEFINITIONAL_REPRESENTATION('',(#5673),#5677);-#5673 = LINE('',#5674,#5675);-#5674 = CARTESIAN_POINT('',(0.,0.15));-#5675 = VECTOR('',#5676,1.);-#5676 = DIRECTION('',(0.,-1.));-#5677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5678 = ORIENTED_EDGE('',*,*,#5679,.F.);-#5679 = EDGE_CURVE('',#5420,#5657,#5680,.T.);+#5601 = ORIENTED_EDGE('',*,*,#5508,.T.);+#5602 = ORIENTED_EDGE('',*,*,#5428,.F.);+#5603 = ORIENTED_EDGE('',*,*,#5604,.T.);+#5604 = EDGE_CURVE('',#5401,#5580,#5605,.T.);+#5605 = SURFACE_CURVE('',#5606,(#5610,#5617),.PCURVE_S1.);+#5606 = LINE('',#5607,#5608);+#5607 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));+#5608 = VECTOR('',#5609,1.);+#5609 = DIRECTION('',(0.,-1.,0.));+#5610 = PCURVE('',#5444,#5611);+#5611 = DEFINITIONAL_REPRESENTATION('',(#5612),#5616);+#5612 = LINE('',#5613,#5614);+#5613 = CARTESIAN_POINT('',(0.,0.15));+#5614 = VECTOR('',#5615,1.);+#5615 = DIRECTION('',(0.,-1.));+#5616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5617 = PCURVE('',#5416,#5618);+#5618 = DEFINITIONAL_REPRESENTATION('',(#5619),#5623);+#5619 = LINE('',#5620,#5621);+#5620 = CARTESIAN_POINT('',(0.7175,0.15));+#5621 = VECTOR('',#5622,1.);+#5622 = DIRECTION('',(0.,-1.));+#5623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5624 = ADVANCED_FACE('',(#5625),#5416,.F.);+#5625 = FACE_BOUND('',#5626,.F.);+#5626 = EDGE_LOOP('',(#5627,#5650,#5651,#5652));+#5627 = ORIENTED_EDGE('',*,*,#5628,.T.);+#5628 = EDGE_CURVE('',#5629,#5580,#5631,.T.);+#5629 = VERTEX_POINT('',#5630);+#5630 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#5631 = SURFACE_CURVE('',#5632,(#5636,#5643),.PCURVE_S1.);+#5632 = LINE('',#5633,#5634);+#5633 = CARTESIAN_POINT('',(-3.205,-1.775,0.));+#5634 = VECTOR('',#5635,1.);+#5635 = DIRECTION('',(1.,0.,0.));+#5636 = PCURVE('',#5416,#5637);+#5637 = DEFINITIONAL_REPRESENTATION('',(#5638),#5642);+#5638 = LINE('',#5639,#5640);+#5639 = CARTESIAN_POINT('',(0.,-0.15));+#5640 = VECTOR('',#5641,1.);+#5641 = DIRECTION('',(1.,0.));+#5642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5643 = PCURVE('',#5251,#5644);+#5644 = DEFINITIONAL_REPRESENTATION('',(#5645),#5649);+#5645 = LINE('',#5646,#5647);+#5646 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#5647 = VECTOR('',#5648,1.);+#5648 = DIRECTION('',(0.,1.));+#5649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5650 = ORIENTED_EDGE('',*,*,#5604,.F.);+#5651 = ORIENTED_EDGE('',*,*,#5400,.F.);+#5652 = ORIENTED_EDGE('',*,*,#5653,.T.);+#5653 = EDGE_CURVE('',#5373,#5629,#5654,.T.);+#5654 = SURFACE_CURVE('',#5655,(#5659,#5666),.PCURVE_S1.);+#5655 = LINE('',#5656,#5657);+#5656 = CARTESIAN_POINT('',(-3.205,-1.475,0.));+#5657 = VECTOR('',#5658,1.);+#5658 = DIRECTION('',(0.,-1.,0.));+#5659 = PCURVE('',#5416,#5660);+#5660 = DEFINITIONAL_REPRESENTATION('',(#5661),#5665);+#5661 = LINE('',#5662,#5663);+#5662 = CARTESIAN_POINT('',(0.,0.15));+#5663 = VECTOR('',#5664,1.);+#5664 = DIRECTION('',(0.,-1.));+#5665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5666 = PCURVE('',#5388,#5667);+#5667 = DEFINITIONAL_REPRESENTATION('',(#5668),#5672);+#5668 = LINE('',#5669,#5670);+#5669 = CARTESIAN_POINT('',(0.15,0.15));+#5670 = VECTOR('',#5671,1.);+#5671 = DIRECTION('',(0.,-1.));+#5672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5673 = ADVANCED_FACE('',(#5674),#5388,.F.);+#5674 = FACE_BOUND('',#5675,.F.);+#5675 = EDGE_LOOP('',(#5676,#5699,#5700,#5701));+#5676 = ORIENTED_EDGE('',*,*,#5677,.T.);+#5677 = EDGE_CURVE('',#5678,#5629,#5680,.T.);+#5678 = VERTEX_POINT('',#5679);+#5679 = CARTESIAN_POINT('',(-3.205,-1.775,0.15)); #5680 = SURFACE_CURVE('',#5681,(#5685,#5692),.PCURVE_S1.); #5681 = LINE('',#5682,#5683);-#5682 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5682 = CARTESIAN_POINT('',(-3.205,-1.775,0.15)); #5683 = VECTOR('',#5684,1.);-#5684 = DIRECTION('',(-1.,0.,0.));-#5685 = PCURVE('',#5435,#5686);+#5684 = DIRECTION('',(0.,0.,-1.));+#5685 = PCURVE('',#5388,#5686); #5686 = DEFINITIONAL_REPRESENTATION('',(#5687),#5691); #5687 = LINE('',#5688,#5689);-#5688 = CARTESIAN_POINT('',(0.,0.15));+#5688 = CARTESIAN_POINT('',(0.,-0.15)); #5689 = VECTOR('',#5690,1.); #5690 = DIRECTION('',(1.,0.)); #5691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5692 = PCURVE('',#5305,#5693);+#5692 = PCURVE('',#5251,#5693); #5693 = DEFINITIONAL_REPRESENTATION('',(#5694),#5698); #5694 = LINE('',#5695,#5696);-#5695 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5695 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #5696 = VECTOR('',#5697,1.);-#5697 = DIRECTION('',(0.,-1.));+#5697 = DIRECTION('',(1.,0.)); #5698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5699 = ORIENTED_EDGE('',*,*,#5419,.T.);-#5700 = ADVANCED_FACE('',(#5701),#5305,.F.);-#5701 = FACE_BOUND('',#5702,.F.);-#5702 = EDGE_LOOP('',(#5703,#5704,#5705,#5706,#5729,#5752,#5773,#5774));-#5703 = ORIENTED_EDGE('',*,*,#5291,.T.);-#5704 = ORIENTED_EDGE('',*,*,#5447,.T.);-#5705 = ORIENTED_EDGE('',*,*,#5679,.T.);-#5706 = ORIENTED_EDGE('',*,*,#5707,.T.);-#5707 = EDGE_CURVE('',#5657,#5708,#5710,.T.);-#5708 = VERTEX_POINT('',#5709);-#5709 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#5710 = SURFACE_CURVE('',#5711,(#5715,#5722),.PCURVE_S1.);-#5711 = LINE('',#5712,#5713);-#5712 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));-#5713 = VECTOR('',#5714,1.);-#5714 = DIRECTION('',(0.,0.,-1.));-#5715 = PCURVE('',#5305,#5716);+#5699 = ORIENTED_EDGE('',*,*,#5653,.F.);+#5700 = ORIENTED_EDGE('',*,*,#5372,.F.);+#5701 = ORIENTED_EDGE('',*,*,#5702,.T.);+#5702 = EDGE_CURVE('',#5345,#5678,#5703,.T.);+#5703 = SURFACE_CURVE('',#5704,(#5708,#5715),.PCURVE_S1.);+#5704 = LINE('',#5705,#5706);+#5705 = CARTESIAN_POINT('',(-3.205,-1.475,0.15));+#5706 = VECTOR('',#5707,1.);+#5707 = DIRECTION('',(0.,-1.,0.));+#5708 = PCURVE('',#5388,#5709);+#5709 = DEFINITIONAL_REPRESENTATION('',(#5710),#5714);+#5710 = LINE('',#5711,#5712);+#5711 = CARTESIAN_POINT('',(0.,0.15));+#5712 = VECTOR('',#5713,1.);+#5713 = DIRECTION('',(0.,-1.));+#5714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5715 = PCURVE('',#5360,#5716); #5716 = DEFINITIONAL_REPRESENTATION('',(#5717),#5721); #5717 = LINE('',#5718,#5719);-#5718 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#5718 = CARTESIAN_POINT('',(0.5675,0.15)); #5719 = VECTOR('',#5720,1.);-#5720 = DIRECTION('',(1.,0.));+#5720 = DIRECTION('',(0.,-1.)); #5721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5722 = PCURVE('',#5513,#5723);-#5723 = DEFINITIONAL_REPRESENTATION('',(#5724),#5728);-#5724 = LINE('',#5725,#5726);-#5725 = CARTESIAN_POINT('',(0.,0.15));-#5726 = VECTOR('',#5727,1.);-#5727 = DIRECTION('',(1.,0.));-#5728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5729 = ORIENTED_EDGE('',*,*,#5730,.T.);-#5730 = EDGE_CURVE('',#5708,#5731,#5733,.T.);-#5731 = VERTEX_POINT('',#5732);-#5732 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#5733 = SURFACE_CURVE('',#5734,(#5738,#5745),.PCURVE_S1.);-#5734 = LINE('',#5735,#5736);-#5735 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#5736 = VECTOR('',#5737,1.);-#5737 = DIRECTION('',(1.,0.,0.));-#5738 = PCURVE('',#5305,#5739);-#5739 = DEFINITIONAL_REPRESENTATION('',(#5740),#5744);-#5740 = LINE('',#5741,#5742);-#5741 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#5742 = VECTOR('',#5743,1.);-#5743 = DIRECTION('',(0.,1.));-#5744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5745 = PCURVE('',#5541,#5746);-#5746 = DEFINITIONAL_REPRESENTATION('',(#5747),#5751);-#5747 = LINE('',#5748,#5749);-#5748 = CARTESIAN_POINT('',(0.,0.15));-#5749 = VECTOR('',#5750,1.);-#5750 = DIRECTION('',(1.,0.));-#5751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5752 = ORIENTED_EDGE('',*,*,#5753,.T.);-#5753 = EDGE_CURVE('',#5731,#5607,#5754,.T.);-#5754 = SURFACE_CURVE('',#5755,(#5759,#5766),.PCURVE_S1.);-#5755 = LINE('',#5756,#5757);-#5756 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#5757 = VECTOR('',#5758,1.);-#5758 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#5759 = PCURVE('',#5305,#5760);-#5760 = DEFINITIONAL_REPRESENTATION('',(#5761),#5765);-#5761 = LINE('',#5762,#5763);-#5762 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#5763 = VECTOR('',#5764,1.);-#5764 = DIRECTION('',(-0.839949759337,0.542664170358));-#5765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5766 = PCURVE('',#5569,#5767);-#5767 = DEFINITIONAL_REPRESENTATION('',(#5768),#5772);-#5768 = LINE('',#5769,#5770);-#5769 = CARTESIAN_POINT('',(0.,0.15));-#5770 = VECTOR('',#5771,1.);-#5771 = DIRECTION('',(1.,0.));-#5772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5773 = ORIENTED_EDGE('',*,*,#5631,.T.);-#5774 = ORIENTED_EDGE('',*,*,#5372,.T.);-#5775 = ADVANCED_FACE('',(#5776),#5513,.F.);-#5776 = FACE_BOUND('',#5777,.F.);-#5777 = EDGE_LOOP('',(#5778,#5779,#5800,#5801));-#5778 = ORIENTED_EDGE('',*,*,#5497,.T.);-#5779 = ORIENTED_EDGE('',*,*,#5780,.F.);-#5780 = EDGE_CURVE('',#5708,#5498,#5781,.T.);-#5781 = SURFACE_CURVE('',#5782,(#5786,#5793),.PCURVE_S1.);-#5782 = LINE('',#5783,#5784);-#5783 = CARTESIAN_POINT('',(-3.205,-1.475,0.));-#5784 = VECTOR('',#5785,1.);-#5785 = DIRECTION('',(0.,-1.,0.));-#5786 = PCURVE('',#5513,#5787);-#5787 = DEFINITIONAL_REPRESENTATION('',(#5788),#5792);-#5788 = LINE('',#5789,#5790);-#5789 = CARTESIAN_POINT('',(0.15,0.15));-#5790 = VECTOR('',#5791,1.);-#5791 = DIRECTION('',(0.,-1.));-#5792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5793 = PCURVE('',#5541,#5794);-#5794 = DEFINITIONAL_REPRESENTATION('',(#5795),#5799);-#5795 = LINE('',#5796,#5797);-#5796 = CARTESIAN_POINT('',(0.,0.15));-#5797 = VECTOR('',#5798,1.);-#5798 = DIRECTION('',(0.,-1.));-#5799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5800 = ORIENTED_EDGE('',*,*,#5707,.F.);-#5801 = ORIENTED_EDGE('',*,*,#5656,.T.);-#5802 = ADVANCED_FACE('',(#5803),#5541,.F.);-#5803 = FACE_BOUND('',#5804,.F.);-#5804 = EDGE_LOOP('',(#5805,#5806,#5827,#5828));-#5805 = ORIENTED_EDGE('',*,*,#5525,.T.);-#5806 = ORIENTED_EDGE('',*,*,#5807,.F.);-#5807 = EDGE_CURVE('',#5731,#5526,#5808,.T.);-#5808 = SURFACE_CURVE('',#5809,(#5813,#5820),.PCURVE_S1.);-#5809 = LINE('',#5810,#5811);-#5810 = CARTESIAN_POINT('',(-2.4875,-1.475,0.));-#5811 = VECTOR('',#5812,1.);-#5812 = DIRECTION('',(0.,-1.,0.));-#5813 = PCURVE('',#5541,#5814);-#5814 = DEFINITIONAL_REPRESENTATION('',(#5815),#5819);-#5815 = LINE('',#5816,#5817);-#5816 = CARTESIAN_POINT('',(0.7175,0.15));-#5817 = VECTOR('',#5818,1.);-#5818 = DIRECTION('',(0.,-1.));-#5819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5820 = PCURVE('',#5569,#5821);-#5821 = DEFINITIONAL_REPRESENTATION('',(#5822),#5826);-#5822 = LINE('',#5823,#5824);-#5823 = CARTESIAN_POINT('',(0.,0.15));-#5824 = VECTOR('',#5825,1.);-#5825 = DIRECTION('',(0.,-1.));-#5826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5827 = ORIENTED_EDGE('',*,*,#5730,.F.);-#5828 = ORIENTED_EDGE('',*,*,#5780,.T.);-#5829 = ADVANCED_FACE('',(#5830),#5569,.F.);+#5722 = ADVANCED_FACE('',(#5723),#5360,.F.);+#5723 = FACE_BOUND('',#5724,.F.);+#5724 = EDGE_LOOP('',(#5725,#5748,#5749,#5750));+#5725 = ORIENTED_EDGE('',*,*,#5726,.T.);+#5726 = EDGE_CURVE('',#5727,#5678,#5729,.T.);+#5727 = VERTEX_POINT('',#5728);+#5728 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#5729 = SURFACE_CURVE('',#5730,(#5734,#5741),.PCURVE_S1.);+#5730 = LINE('',#5731,#5732);+#5731 = CARTESIAN_POINT('',(-2.6375,-1.775,0.15));+#5732 = VECTOR('',#5733,1.);+#5733 = DIRECTION('',(-1.,0.,0.));+#5734 = PCURVE('',#5360,#5735);+#5735 = DEFINITIONAL_REPRESENTATION('',(#5736),#5740);+#5736 = LINE('',#5737,#5738);+#5737 = CARTESIAN_POINT('',(0.,-0.15));+#5738 = VECTOR('',#5739,1.);+#5739 = DIRECTION('',(1.,0.));+#5740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5741 = PCURVE('',#5251,#5742);+#5742 = DEFINITIONAL_REPRESENTATION('',(#5743),#5747);+#5743 = LINE('',#5744,#5745);+#5744 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5745 = VECTOR('',#5746,1.);+#5746 = DIRECTION('',(0.,-1.));+#5747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5748 = ORIENTED_EDGE('',*,*,#5702,.F.);+#5749 = ORIENTED_EDGE('',*,*,#5344,.F.);+#5750 = ORIENTED_EDGE('',*,*,#5751,.T.);+#5751 = EDGE_CURVE('',#5322,#5727,#5752,.T.);+#5752 = SURFACE_CURVE('',#5753,(#5757,#5764),.PCURVE_S1.);+#5753 = LINE('',#5754,#5755);+#5754 = CARTESIAN_POINT('',(-2.6375,-1.475,0.15));+#5755 = VECTOR('',#5756,1.);+#5756 = DIRECTION('',(0.,-1.,0.));+#5757 = PCURVE('',#5360,#5758);+#5758 = DEFINITIONAL_REPRESENTATION('',(#5759),#5763);+#5759 = LINE('',#5760,#5761);+#5760 = CARTESIAN_POINT('',(0.,0.15));+#5761 = VECTOR('',#5762,1.);+#5762 = DIRECTION('',(0.,-1.));+#5763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5764 = PCURVE('',#5279,#5765);+#5765 = DEFINITIONAL_REPRESENTATION('',(#5766),#5770);+#5766 = LINE('',#5767,#5768);+#5767 = CARTESIAN_POINT('',(0.529793591883,0.15));+#5768 = VECTOR('',#5769,1.);+#5769 = DIRECTION('',(-0.,-1.));+#5770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5771 = ADVANCED_FACE('',(#5772),#5279,.F.);+#5772 = FACE_BOUND('',#5773,.F.);+#5773 = EDGE_LOOP('',(#5774,#5795,#5796,#5797));+#5774 = ORIENTED_EDGE('',*,*,#5775,.T.);+#5775 = EDGE_CURVE('',#5236,#5727,#5776,.T.);+#5776 = SURFACE_CURVE('',#5777,(#5781,#5788),.PCURVE_S1.);+#5777 = LINE('',#5778,#5779);+#5778 = CARTESIAN_POINT('',(-2.35,-1.775,0.595));+#5779 = VECTOR('',#5780,1.);+#5780 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5781 = PCURVE('',#5279,#5782);+#5782 = DEFINITIONAL_REPRESENTATION('',(#5783),#5787);+#5783 = LINE('',#5784,#5785);+#5784 = CARTESIAN_POINT('',(-0.,-0.15));+#5785 = VECTOR('',#5786,1.);+#5786 = DIRECTION('',(1.,0.));+#5787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5788 = PCURVE('',#5251,#5789);+#5789 = DEFINITIONAL_REPRESENTATION('',(#5790),#5794);+#5790 = LINE('',#5791,#5792);+#5791 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5792 = VECTOR('',#5793,1.);+#5793 = DIRECTION('',(0.839949759337,-0.542664170358));+#5794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5795 = ORIENTED_EDGE('',*,*,#5751,.F.);+#5796 = ORIENTED_EDGE('',*,*,#5321,.F.);+#5797 = ORIENTED_EDGE('',*,*,#5263,.T.);+#5798 = ADVANCED_FACE('',(#5799),#5251,.T.);+#5799 = FACE_BOUND('',#5800,.T.);+#5800 = EDGE_LOOP('',(#5801,#5802,#5803,#5804,#5805,#5806,#5807,#5808));+#5801 = ORIENTED_EDGE('',*,*,#5235,.T.);+#5802 = ORIENTED_EDGE('',*,*,#5775,.T.);+#5803 = ORIENTED_EDGE('',*,*,#5726,.T.);+#5804 = ORIENTED_EDGE('',*,*,#5677,.T.);+#5805 = ORIENTED_EDGE('',*,*,#5628,.T.);+#5806 = ORIENTED_EDGE('',*,*,#5579,.T.);+#5807 = ORIENTED_EDGE('',*,*,#5531,.T.);+#5808 = ORIENTED_EDGE('',*,*,#5809,.T.);+#5809 = EDGE_CURVE('',#5532,#5201,#5810,.T.);+#5810 = SURFACE_CURVE('',#5811,(#5815,#5822),.PCURVE_S1.);+#5811 = LINE('',#5812,#5813);+#5812 = CARTESIAN_POINT('',(-2.15,-1.775,0.445));+#5813 = VECTOR('',#5814,1.);+#5814 = DIRECTION('',(0.,0.,1.));+#5815 = PCURVE('',#5251,#5816);+#5816 = DEFINITIONAL_REPRESENTATION('',(#5817),#5821);+#5817 = LINE('',#5818,#5819);+#5818 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#5819 = VECTOR('',#5820,1.);+#5820 = DIRECTION('',(-1.,0.));+#5821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5822 = PCURVE('',#5223,#5823);+#5823 = DEFINITIONAL_REPRESENTATION('',(#5824),#5828);+#5824 = LINE('',#5825,#5826);+#5825 = CARTESIAN_POINT('',(0.,-0.15));+#5826 = VECTOR('',#5827,1.);+#5827 = DIRECTION('',(1.,0.));+#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5829 = ADVANCED_FACE('',(#5830),#5223,.F.); #5830 = FACE_BOUND('',#5831,.F.); #5831 = EDGE_LOOP('',(#5832,#5833,#5834,#5835));-#5832 = ORIENTED_EDGE('',*,*,#5553,.T.);-#5833 = ORIENTED_EDGE('',*,*,#5606,.T.);-#5834 = ORIENTED_EDGE('',*,*,#5753,.F.);-#5835 = ORIENTED_EDGE('',*,*,#5807,.T.);+#5832 = ORIENTED_EDGE('',*,*,#5554,.F.);+#5833 = ORIENTED_EDGE('',*,*,#5809,.T.);+#5834 = ORIENTED_EDGE('',*,*,#5200,.T.);+#5835 = ORIENTED_EDGE('',*,*,#5484,.F.); #5836 = MANIFOLD_SOLID_BREP('',#5837);-#5837 = CLOSED_SHELL('',(#5838,#5958,#6034,#6110,#6244,#6293,#6342,#6417- ,#6444,#6471));+#5837 = CLOSED_SHELL('',(#5838,#5958,#6146,#6217,#6266,#6315,#6364,#6413+ ,#6440,#6471)); #5838 = ADVANCED_FACE('',(#5839),#5853,.F.); #5839 = FACE_BOUND('',#5840,.F.); #5840 = EDGE_LOOP('',(#5841,#5876,#5904,#5932));@@ -6873,609 +6873,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #5957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5958 = ADVANCED_FACE('',(#5959),#5865,.F.);+#5958 = ADVANCED_FACE('',(#5959),#5947,.F.); #5959 = FACE_BOUND('',#5960,.F.);-#5960 = EDGE_LOOP('',(#5961,#5991,#6012,#6013));-#5961 = ORIENTED_EDGE('',*,*,#5962,.F.);-#5962 = EDGE_CURVE('',#5963,#5965,#5967,.T.);-#5963 = VERTEX_POINT('',#5964);-#5964 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#5965 = VERTEX_POINT('',#5966);-#5966 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));-#5967 = SURFACE_CURVE('',#5968,(#5972,#5979),.PCURVE_S1.);-#5968 = LINE('',#5969,#5970);-#5969 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#5970 = VECTOR('',#5971,1.);-#5971 = DIRECTION('',(0.,1.,0.));-#5972 = PCURVE('',#5865,#5973);-#5973 = DEFINITIONAL_REPRESENTATION('',(#5974),#5978);-#5974 = LINE('',#5975,#5976);-#5975 = CARTESIAN_POINT('',(0.,-0.15));-#5976 = VECTOR('',#5977,1.);-#5977 = DIRECTION('',(0.,1.));-#5978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5979 = PCURVE('',#5980,#5985);-#5980 = PLANE('',#5981);-#5981 = AXIS2_PLACEMENT_3D('',#5982,#5983,#5984);-#5982 = CARTESIAN_POINT('',(-2.2,-2.275,0.445));-#5983 = DIRECTION('',(-0.,0.,1.));-#5984 = DIRECTION('',(1.,0.,0.));-#5985 = DEFINITIONAL_REPRESENTATION('',(#5986),#5990);-#5986 = LINE('',#5987,#5988);-#5987 = CARTESIAN_POINT('',(5.E-02,-0.15));-#5988 = VECTOR('',#5989,1.);-#5989 = DIRECTION('',(0.,1.));-#5990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5991 = ORIENTED_EDGE('',*,*,#5992,.T.);-#5992 = EDGE_CURVE('',#5963,#5843,#5993,.T.);-#5993 = SURFACE_CURVE('',#5994,(#5998,#6005),.PCURVE_S1.);-#5994 = LINE('',#5995,#5996);-#5995 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));-#5996 = VECTOR('',#5997,1.);-#5997 = DIRECTION('',(0.,0.,1.));-#5998 = PCURVE('',#5865,#5999);-#5999 = DEFINITIONAL_REPRESENTATION('',(#6000),#6004);-#6000 = LINE('',#6001,#6002);-#6001 = CARTESIAN_POINT('',(0.,-0.15));-#6002 = VECTOR('',#6003,1.);-#6003 = DIRECTION('',(1.,0.));-#6004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6005 = PCURVE('',#5893,#6006);-#6006 = DEFINITIONAL_REPRESENTATION('',(#6007),#6011);-#6007 = LINE('',#6008,#6009);-#6008 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#6009 = VECTOR('',#6010,1.);-#6010 = DIRECTION('',(-1.,0.));-#6011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6012 = ORIENTED_EDGE('',*,*,#5842,.T.);-#6013 = ORIENTED_EDGE('',*,*,#6014,.F.);-#6014 = EDGE_CURVE('',#5965,#5845,#6015,.T.);-#6015 = SURFACE_CURVE('',#6016,(#6020,#6027),.PCURVE_S1.);-#6016 = LINE('',#6017,#6018);-#6017 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));-#6018 = VECTOR('',#6019,1.);-#6019 = DIRECTION('',(0.,0.,1.));-#6020 = PCURVE('',#5865,#6021);-#6021 = DEFINITIONAL_REPRESENTATION('',(#6022),#6026);-#6022 = LINE('',#6023,#6024);-#6023 = CARTESIAN_POINT('',(0.,0.15));-#6024 = VECTOR('',#6025,1.);-#6025 = DIRECTION('',(1.,0.));-#6026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6027 = PCURVE('',#5947,#6028);-#6028 = DEFINITIONAL_REPRESENTATION('',(#6029),#6033);-#6029 = LINE('',#6030,#6031);-#6030 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#6031 = VECTOR('',#6032,1.);-#6032 = DIRECTION('',(-1.,0.));-#6033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6034 = ADVANCED_FACE('',(#6035),#5921,.F.);-#6035 = FACE_BOUND('',#6036,.F.);-#6036 = EDGE_LOOP('',(#6037,#6060,#6088,#6109));-#6037 = ORIENTED_EDGE('',*,*,#6038,.T.);-#6038 = EDGE_CURVE('',#5878,#6039,#6041,.T.);-#6039 = VERTEX_POINT('',#6040);-#6040 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));-#6041 = SURFACE_CURVE('',#6042,(#6046,#6053),.PCURVE_S1.);-#6042 = LINE('',#6043,#6044);-#6043 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));-#6044 = VECTOR('',#6045,1.);-#6045 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#6046 = PCURVE('',#5921,#6047);-#6047 = DEFINITIONAL_REPRESENTATION('',(#6048),#6052);-#6048 = LINE('',#6049,#6050);-#6049 = CARTESIAN_POINT('',(-0.,-0.15));-#6050 = VECTOR('',#6051,1.);-#6051 = DIRECTION('',(1.,0.));-#6052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6053 = PCURVE('',#5893,#6054);-#6054 = DEFINITIONAL_REPRESENTATION('',(#6055),#6059);-#6055 = LINE('',#6056,#6057);-#6056 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#6057 = VECTOR('',#6058,1.);-#6058 = DIRECTION('',(0.839949759337,-0.542664170358));-#6059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6060 = ORIENTED_EDGE('',*,*,#6061,.F.);-#6061 = EDGE_CURVE('',#6062,#6039,#6064,.T.);-#6062 = VERTEX_POINT('',#6063);-#6063 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));-#6064 = SURFACE_CURVE('',#6065,(#6069,#6076),.PCURVE_S1.);-#6065 = LINE('',#6066,#6067);-#6066 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));-#6067 = VECTOR('',#6068,1.);-#6068 = DIRECTION('',(0.,-1.,0.));-#6069 = PCURVE('',#5921,#6070);-#6070 = DEFINITIONAL_REPRESENTATION('',(#6071),#6075);-#6071 = LINE('',#6072,#6073);-#6072 = CARTESIAN_POINT('',(0.529793591883,0.15));-#6073 = VECTOR('',#6074,1.);-#6074 = DIRECTION('',(-0.,-1.));-#6075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6076 = PCURVE('',#6077,#6082);-#6077 = PLANE('',#6078);-#6078 = AXIS2_PLACEMENT_3D('',#6079,#6080,#6081);-#6079 = CARTESIAN_POINT('',(-2.6375,-2.275,0.15));-#6080 = DIRECTION('',(-0.,-0.,-1.));-#6081 = DIRECTION('',(-1.,0.,0.));-#6082 = DEFINITIONAL_REPRESENTATION('',(#6083),#6087);-#6083 = LINE('',#6084,#6085);-#6084 = CARTESIAN_POINT('',(0.,0.15));-#6085 = VECTOR('',#6086,1.);-#6086 = DIRECTION('',(0.,-1.));-#6087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6088 = ORIENTED_EDGE('',*,*,#6089,.F.);-#6089 = EDGE_CURVE('',#5906,#6062,#6090,.T.);-#6090 = SURFACE_CURVE('',#6091,(#6095,#6102),.PCURVE_S1.);-#6091 = LINE('',#6092,#6093);-#6092 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));-#6093 = VECTOR('',#6094,1.);-#6094 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#6095 = PCURVE('',#5921,#6096);-#6096 = DEFINITIONAL_REPRESENTATION('',(#6097),#6101);-#6097 = LINE('',#6098,#6099);-#6098 = CARTESIAN_POINT('',(0.,0.15));-#6099 = VECTOR('',#6100,1.);-#6100 = DIRECTION('',(1.,0.));-#6101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6102 = PCURVE('',#5947,#6103);-#6103 = DEFINITIONAL_REPRESENTATION('',(#6104),#6108);-#6104 = LINE('',#6105,#6106);-#6105 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#6106 = VECTOR('',#6107,1.);-#6107 = DIRECTION('',(0.839949759337,-0.542664170358));-#6108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6109 = ORIENTED_EDGE('',*,*,#5905,.T.);-#6110 = ADVANCED_FACE('',(#6111),#5893,.T.);-#6111 = FACE_BOUND('',#6112,.T.);-#6112 = EDGE_LOOP('',(#6113,#6114,#6115,#6138,#6166,#6194,#6222,#6243));-#6113 = ORIENTED_EDGE('',*,*,#5877,.T.);-#6114 = ORIENTED_EDGE('',*,*,#6038,.T.);-#6115 = ORIENTED_EDGE('',*,*,#6116,.T.);-#6116 = EDGE_CURVE('',#6039,#6117,#6119,.T.);-#6117 = VERTEX_POINT('',#6118);-#6118 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));-#6119 = SURFACE_CURVE('',#6120,(#6124,#6131),.PCURVE_S1.);+#5960 = EDGE_LOOP('',(#5961,#5962,#5985,#6013,#6041,#6069,#6097,#6125));+#5961 = ORIENTED_EDGE('',*,*,#5933,.T.);+#5962 = ORIENTED_EDGE('',*,*,#5963,.T.);+#5963 = EDGE_CURVE('',#5906,#5964,#5966,.T.);+#5964 = VERTEX_POINT('',#5965);+#5965 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#5966 = SURFACE_CURVE('',#5967,(#5971,#5978),.PCURVE_S1.);+#5967 = LINE('',#5968,#5969);+#5968 = CARTESIAN_POINT('',(-2.35,-2.125,0.595));+#5969 = VECTOR('',#5970,1.);+#5970 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#5971 = PCURVE('',#5947,#5972);+#5972 = DEFINITIONAL_REPRESENTATION('',(#5973),#5977);+#5973 = LINE('',#5974,#5975);+#5974 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#5975 = VECTOR('',#5976,1.);+#5976 = DIRECTION('',(0.839949759337,-0.542664170358));+#5977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5978 = PCURVE('',#5921,#5979);+#5979 = DEFINITIONAL_REPRESENTATION('',(#5980),#5984);+#5980 = LINE('',#5981,#5982);+#5981 = CARTESIAN_POINT('',(0.,0.15));+#5982 = VECTOR('',#5983,1.);+#5983 = DIRECTION('',(1.,0.));+#5984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5985 = ORIENTED_EDGE('',*,*,#5986,.T.);+#5986 = EDGE_CURVE('',#5964,#5987,#5989,.T.);+#5987 = VERTEX_POINT('',#5988);+#5988 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#5989 = SURFACE_CURVE('',#5990,(#5994,#6001),.PCURVE_S1.);+#5990 = LINE('',#5991,#5992);+#5991 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#5992 = VECTOR('',#5993,1.);+#5993 = DIRECTION('',(-1.,0.,0.));+#5994 = PCURVE('',#5947,#5995);+#5995 = DEFINITIONAL_REPRESENTATION('',(#5996),#6000);+#5996 = LINE('',#5997,#5998);+#5997 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#5998 = VECTOR('',#5999,1.);+#5999 = DIRECTION('',(0.,-1.));+#6000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6001 = PCURVE('',#6002,#6007);+#6002 = PLANE('',#6003);+#6003 = AXIS2_PLACEMENT_3D('',#6004,#6005,#6006);+#6004 = CARTESIAN_POINT('',(-2.6375,-2.275,0.15));+#6005 = DIRECTION('',(-0.,-0.,-1.));+#6006 = DIRECTION('',(-1.,0.,0.));+#6007 = DEFINITIONAL_REPRESENTATION('',(#6008),#6012);+#6008 = LINE('',#6009,#6010);+#6009 = CARTESIAN_POINT('',(0.,0.15));+#6010 = VECTOR('',#6011,1.);+#6011 = DIRECTION('',(1.,0.));+#6012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6013 = ORIENTED_EDGE('',*,*,#6014,.T.);+#6014 = EDGE_CURVE('',#5987,#6015,#6017,.T.);+#6015 = VERTEX_POINT('',#6016);+#6016 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#6017 = SURFACE_CURVE('',#6018,(#6022,#6029),.PCURVE_S1.);+#6018 = LINE('',#6019,#6020);+#6019 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#6020 = VECTOR('',#6021,1.);+#6021 = DIRECTION('',(0.,0.,-1.));+#6022 = PCURVE('',#5947,#6023);+#6023 = DEFINITIONAL_REPRESENTATION('',(#6024),#6028);+#6024 = LINE('',#6025,#6026);+#6025 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6026 = VECTOR('',#6027,1.);+#6027 = DIRECTION('',(1.,0.));+#6028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6029 = PCURVE('',#6030,#6035);+#6030 = PLANE('',#6031);+#6031 = AXIS2_PLACEMENT_3D('',#6032,#6033,#6034);+#6032 = CARTESIAN_POINT('',(-3.205,-2.275,0.15));+#6033 = DIRECTION('',(1.,0.,0.));+#6034 = DIRECTION('',(0.,0.,-1.));+#6035 = DEFINITIONAL_REPRESENTATION('',(#6036),#6040);+#6036 = LINE('',#6037,#6038);+#6037 = CARTESIAN_POINT('',(0.,0.15));+#6038 = VECTOR('',#6039,1.);+#6039 = DIRECTION('',(1.,0.));+#6040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6041 = ORIENTED_EDGE('',*,*,#6042,.T.);+#6042 = EDGE_CURVE('',#6015,#6043,#6045,.T.);+#6043 = VERTEX_POINT('',#6044);+#6044 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6045 = SURFACE_CURVE('',#6046,(#6050,#6057),.PCURVE_S1.);+#6046 = LINE('',#6047,#6048);+#6047 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#6048 = VECTOR('',#6049,1.);+#6049 = DIRECTION('',(1.,0.,0.));+#6050 = PCURVE('',#5947,#6051);+#6051 = DEFINITIONAL_REPRESENTATION('',(#6052),#6056);+#6052 = LINE('',#6053,#6054);+#6053 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6054 = VECTOR('',#6055,1.);+#6055 = DIRECTION('',(0.,1.));+#6056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6057 = PCURVE('',#6058,#6063);+#6058 = PLANE('',#6059);+#6059 = AXIS2_PLACEMENT_3D('',#6060,#6061,#6062);+#6060 = CARTESIAN_POINT('',(-3.205,-2.275,0.));+#6061 = DIRECTION('',(-0.,0.,1.));+#6062 = DIRECTION('',(1.,0.,0.));+#6063 = DEFINITIONAL_REPRESENTATION('',(#6064),#6068);+#6064 = LINE('',#6065,#6066);+#6065 = CARTESIAN_POINT('',(0.,0.15));+#6066 = VECTOR('',#6067,1.);+#6067 = DIRECTION('',(1.,0.));+#6068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6069 = ORIENTED_EDGE('',*,*,#6070,.T.);+#6070 = EDGE_CURVE('',#6043,#6071,#6073,.T.);+#6071 = VERTEX_POINT('',#6072);+#6072 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#6073 = SURFACE_CURVE('',#6074,(#6078,#6085),.PCURVE_S1.);+#6074 = LINE('',#6075,#6076);+#6075 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6076 = VECTOR('',#6077,1.);+#6077 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6078 = PCURVE('',#5947,#6079);+#6079 = DEFINITIONAL_REPRESENTATION('',(#6080),#6084);+#6080 = LINE('',#6081,#6082);+#6081 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6082 = VECTOR('',#6083,1.);+#6083 = DIRECTION('',(-0.839949759337,0.542664170358));+#6084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6085 = PCURVE('',#6086,#6091);+#6086 = PLANE('',#6087);+#6087 = AXIS2_PLACEMENT_3D('',#6088,#6089,#6090);+#6088 = CARTESIAN_POINT('',(-2.4875,-2.275,0.));+#6089 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#6090 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6091 = DEFINITIONAL_REPRESENTATION('',(#6092),#6096);+#6092 = LINE('',#6093,#6094);+#6093 = CARTESIAN_POINT('',(0.,0.15));+#6094 = VECTOR('',#6095,1.);+#6095 = DIRECTION('',(1.,0.));+#6096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6097 = ORIENTED_EDGE('',*,*,#6098,.T.);+#6098 = EDGE_CURVE('',#6071,#6099,#6101,.T.);+#6099 = VERTEX_POINT('',#6100);+#6100 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#6101 = SURFACE_CURVE('',#6102,(#6106,#6113),.PCURVE_S1.);+#6102 = LINE('',#6103,#6104);+#6103 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));+#6104 = VECTOR('',#6105,1.);+#6105 = DIRECTION('',(1.,0.,0.));+#6106 = PCURVE('',#5947,#6107);+#6107 = DEFINITIONAL_REPRESENTATION('',(#6108),#6112);+#6108 = LINE('',#6109,#6110);+#6109 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6110 = VECTOR('',#6111,1.);+#6111 = DIRECTION('',(0.,1.));+#6112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6113 = PCURVE('',#6114,#6119);+#6114 = PLANE('',#6115);+#6115 = AXIS2_PLACEMENT_3D('',#6116,#6117,#6118);+#6116 = CARTESIAN_POINT('',(-2.2,-2.275,0.445));+#6117 = DIRECTION('',(-0.,0.,1.));+#6118 = DIRECTION('',(1.,0.,0.));+#6119 = DEFINITIONAL_REPRESENTATION('',(#6120),#6124); #6120 = LINE('',#6121,#6122);-#6121 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#6121 = CARTESIAN_POINT('',(0.,0.15)); #6122 = VECTOR('',#6123,1.);-#6123 = DIRECTION('',(-1.,0.,0.));-#6124 = PCURVE('',#5893,#6125);-#6125 = DEFINITIONAL_REPRESENTATION('',(#6126),#6130);-#6126 = LINE('',#6127,#6128);-#6127 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#6128 = VECTOR('',#6129,1.);-#6129 = DIRECTION('',(0.,-1.));-#6130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6131 = PCURVE('',#6077,#6132);-#6132 = DEFINITIONAL_REPRESENTATION('',(#6133),#6137);-#6133 = LINE('',#6134,#6135);-#6134 = CARTESIAN_POINT('',(0.,-0.15));-#6135 = VECTOR('',#6136,1.);-#6136 = DIRECTION('',(1.,0.));-#6137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6138 = ORIENTED_EDGE('',*,*,#6139,.T.);-#6139 = EDGE_CURVE('',#6117,#6140,#6142,.T.);-#6140 = VERTEX_POINT('',#6141);-#6141 = CARTESIAN_POINT('',(-3.205,-2.425,0.));-#6142 = SURFACE_CURVE('',#6143,(#6147,#6154),.PCURVE_S1.);-#6143 = LINE('',#6144,#6145);-#6144 = CARTESIAN_POINT('',(-3.205,-2.425,0.15));-#6145 = VECTOR('',#6146,1.);-#6146 = DIRECTION('',(0.,0.,-1.));-#6147 = PCURVE('',#5893,#6148);-#6148 = DEFINITIONAL_REPRESENTATION('',(#6149),#6153);-#6149 = LINE('',#6150,#6151);-#6150 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#6151 = VECTOR('',#6152,1.);-#6152 = DIRECTION('',(1.,0.));-#6153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6154 = PCURVE('',#6155,#6160);-#6155 = PLANE('',#6156);-#6156 = AXIS2_PLACEMENT_3D('',#6157,#6158,#6159);-#6157 = CARTESIAN_POINT('',(-3.205,-2.275,0.15));-#6158 = DIRECTION('',(1.,0.,0.));-#6159 = DIRECTION('',(0.,0.,-1.));-#6160 = DEFINITIONAL_REPRESENTATION('',(#6161),#6165);-#6161 = LINE('',#6162,#6163);-#6162 = CARTESIAN_POINT('',(0.,-0.15));-#6163 = VECTOR('',#6164,1.);-#6164 = DIRECTION('',(1.,0.));-#6165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6166 = ORIENTED_EDGE('',*,*,#6167,.T.);-#6167 = EDGE_CURVE('',#6140,#6168,#6170,.T.);-#6168 = VERTEX_POINT('',#6169);-#6169 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));-#6170 = SURFACE_CURVE('',#6171,(#6175,#6182),.PCURVE_S1.);-#6171 = LINE('',#6172,#6173);-#6172 = CARTESIAN_POINT('',(-3.205,-2.425,0.));-#6173 = VECTOR('',#6174,1.);-#6174 = DIRECTION('',(1.,0.,0.));-#6175 = PCURVE('',#5893,#6176);-#6176 = DEFINITIONAL_REPRESENTATION('',(#6177),#6181);+#6123 = DIRECTION('',(1.,0.));+#6124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6125 = ORIENTED_EDGE('',*,*,#6126,.T.);+#6126 = EDGE_CURVE('',#6099,#5845,#6127,.T.);+#6127 = SURFACE_CURVE('',#6128,(#6132,#6139),.PCURVE_S1.);+#6128 = LINE('',#6129,#6130);+#6129 = CARTESIAN_POINT('',(-2.15,-2.125,0.445));+#6130 = VECTOR('',#6131,1.);+#6131 = DIRECTION('',(0.,0.,1.));+#6132 = PCURVE('',#5947,#6133);+#6133 = DEFINITIONAL_REPRESENTATION('',(#6134),#6138);+#6134 = LINE('',#6135,#6136);+#6135 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6136 = VECTOR('',#6137,1.);+#6137 = DIRECTION('',(-1.,0.));+#6138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6139 = PCURVE('',#5865,#6140);+#6140 = DEFINITIONAL_REPRESENTATION('',(#6141),#6145);+#6141 = LINE('',#6142,#6143);+#6142 = CARTESIAN_POINT('',(0.,0.15));+#6143 = VECTOR('',#6144,1.);+#6144 = DIRECTION('',(1.,0.));+#6145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6146 = ADVANCED_FACE('',(#6147),#6114,.F.);+#6147 = FACE_BOUND('',#6148,.F.);+#6148 = EDGE_LOOP('',(#6149,#6172,#6195,#6216));+#6149 = ORIENTED_EDGE('',*,*,#6150,.F.);+#6150 = EDGE_CURVE('',#6151,#6071,#6153,.T.);+#6151 = VERTEX_POINT('',#6152);+#6152 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6153 = SURFACE_CURVE('',#6154,(#6158,#6165),.PCURVE_S1.);+#6154 = LINE('',#6155,#6156);+#6155 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6156 = VECTOR('',#6157,1.);+#6157 = DIRECTION('',(0.,1.,0.));+#6158 = PCURVE('',#6114,#6159);+#6159 = DEFINITIONAL_REPRESENTATION('',(#6160),#6164);+#6160 = LINE('',#6161,#6162);+#6161 = CARTESIAN_POINT('',(0.,-0.15));+#6162 = VECTOR('',#6163,1.);+#6163 = DIRECTION('',(0.,1.));+#6164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6165 = PCURVE('',#6086,#6166);+#6166 = DEFINITIONAL_REPRESENTATION('',(#6167),#6171);+#6167 = LINE('',#6168,#6169);+#6168 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#6169 = VECTOR('',#6170,1.);+#6170 = DIRECTION('',(0.,1.));+#6171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6172 = ORIENTED_EDGE('',*,*,#6173,.T.);+#6173 = EDGE_CURVE('',#6151,#6174,#6176,.T.);+#6174 = VERTEX_POINT('',#6175);+#6175 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6176 = SURFACE_CURVE('',#6177,(#6181,#6188),.PCURVE_S1.); #6177 = LINE('',#6178,#6179);-#6178 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6178 = CARTESIAN_POINT('',(-2.2,-2.425,0.445)); #6179 = VECTOR('',#6180,1.);-#6180 = DIRECTION('',(0.,1.));-#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6182 = PCURVE('',#6183,#6188);-#6183 = PLANE('',#6184);-#6184 = AXIS2_PLACEMENT_3D('',#6185,#6186,#6187);-#6185 = CARTESIAN_POINT('',(-3.205,-2.275,0.));-#6186 = DIRECTION('',(-0.,0.,1.));-#6187 = DIRECTION('',(1.,0.,0.));-#6188 = DEFINITIONAL_REPRESENTATION('',(#6189),#6193);-#6189 = LINE('',#6190,#6191);-#6190 = CARTESIAN_POINT('',(0.,-0.15));-#6191 = VECTOR('',#6192,1.);-#6192 = DIRECTION('',(1.,0.));-#6193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6194 = ORIENTED_EDGE('',*,*,#6195,.T.);-#6195 = EDGE_CURVE('',#6168,#6196,#6198,.T.);-#6196 = VERTEX_POINT('',#6197);-#6197 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));-#6198 = SURFACE_CURVE('',#6199,(#6203,#6210),.PCURVE_S1.);-#6199 = LINE('',#6200,#6201);-#6200 = CARTESIAN_POINT('',(-2.4875,-2.425,0.));-#6201 = VECTOR('',#6202,1.);-#6202 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#6203 = PCURVE('',#5893,#6204);-#6204 = DEFINITIONAL_REPRESENTATION('',(#6205),#6209);-#6205 = LINE('',#6206,#6207);-#6206 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#6207 = VECTOR('',#6208,1.);-#6208 = DIRECTION('',(-0.839949759337,0.542664170358));-#6209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6210 = PCURVE('',#6211,#6216);-#6211 = PLANE('',#6212);-#6212 = AXIS2_PLACEMENT_3D('',#6213,#6214,#6215);-#6213 = CARTESIAN_POINT('',(-2.4875,-2.275,0.));-#6214 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#6215 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#6216 = DEFINITIONAL_REPRESENTATION('',(#6217),#6221);-#6217 = LINE('',#6218,#6219);-#6218 = CARTESIAN_POINT('',(0.,-0.15));-#6219 = VECTOR('',#6220,1.);-#6220 = DIRECTION('',(1.,0.));-#6221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6222 = ORIENTED_EDGE('',*,*,#6223,.T.);-#6223 = EDGE_CURVE('',#6196,#5963,#6224,.T.);+#6180 = DIRECTION('',(1.,0.,0.));+#6181 = PCURVE('',#6114,#6182);+#6182 = DEFINITIONAL_REPRESENTATION('',(#6183),#6187);+#6183 = LINE('',#6184,#6185);+#6184 = CARTESIAN_POINT('',(0.,-0.15));+#6185 = VECTOR('',#6186,1.);+#6186 = DIRECTION('',(1.,0.));+#6187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6188 = PCURVE('',#5893,#6189);+#6189 = DEFINITIONAL_REPRESENTATION('',(#6190),#6194);+#6190 = LINE('',#6191,#6192);+#6191 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6192 = VECTOR('',#6193,1.);+#6193 = DIRECTION('',(0.,1.));+#6194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6195 = ORIENTED_EDGE('',*,*,#6196,.T.);+#6196 = EDGE_CURVE('',#6174,#6099,#6197,.T.);+#6197 = SURFACE_CURVE('',#6198,(#6202,#6209),.PCURVE_S1.);+#6198 = LINE('',#6199,#6200);+#6199 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6200 = VECTOR('',#6201,1.);+#6201 = DIRECTION('',(0.,1.,0.));+#6202 = PCURVE('',#6114,#6203);+#6203 = DEFINITIONAL_REPRESENTATION('',(#6204),#6208);+#6204 = LINE('',#6205,#6206);+#6205 = CARTESIAN_POINT('',(5.E-02,-0.15));+#6206 = VECTOR('',#6207,1.);+#6207 = DIRECTION('',(0.,1.));+#6208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6209 = PCURVE('',#5865,#6210);+#6210 = DEFINITIONAL_REPRESENTATION('',(#6211),#6215);+#6211 = LINE('',#6212,#6213);+#6212 = CARTESIAN_POINT('',(0.,-0.15));+#6213 = VECTOR('',#6214,1.);+#6214 = DIRECTION('',(0.,1.));+#6215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6216 = ORIENTED_EDGE('',*,*,#6098,.F.);+#6217 = ADVANCED_FACE('',(#6218),#6086,.F.);+#6218 = FACE_BOUND('',#6219,.F.);+#6219 = EDGE_LOOP('',(#6220,#6243,#6244,#6245));+#6220 = ORIENTED_EDGE('',*,*,#6221,.T.);+#6221 = EDGE_CURVE('',#6222,#6151,#6224,.T.);+#6222 = VERTEX_POINT('',#6223);+#6223 = CARTESIAN_POINT('',(-2.4875,-2.425,0.)); #6224 = SURFACE_CURVE('',#6225,(#6229,#6236),.PCURVE_S1.); #6225 = LINE('',#6226,#6227);-#6226 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));+#6226 = CARTESIAN_POINT('',(-2.4875,-2.425,0.)); #6227 = VECTOR('',#6228,1.);-#6228 = DIRECTION('',(1.,0.,0.));-#6229 = PCURVE('',#5893,#6230);+#6228 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6229 = PCURVE('',#6086,#6230); #6230 = DEFINITIONAL_REPRESENTATION('',(#6231),#6235); #6231 = LINE('',#6232,#6233);-#6232 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6232 = CARTESIAN_POINT('',(0.,-0.15)); #6233 = VECTOR('',#6234,1.);-#6234 = DIRECTION('',(0.,1.));+#6234 = DIRECTION('',(1.,0.)); #6235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6236 = PCURVE('',#5980,#6237);+#6236 = PCURVE('',#5893,#6237); #6237 = DEFINITIONAL_REPRESENTATION('',(#6238),#6242); #6238 = LINE('',#6239,#6240);-#6239 = CARTESIAN_POINT('',(0.,-0.15));+#6239 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #6240 = VECTOR('',#6241,1.);-#6241 = DIRECTION('',(1.,0.));+#6241 = DIRECTION('',(-0.839949759337,0.542664170358)); #6242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6243 = ORIENTED_EDGE('',*,*,#5992,.T.);-#6244 = ADVANCED_FACE('',(#6245),#5980,.F.);-#6245 = FACE_BOUND('',#6246,.F.);-#6246 = EDGE_LOOP('',(#6247,#6270,#6271,#6272));-#6247 = ORIENTED_EDGE('',*,*,#6248,.F.);-#6248 = EDGE_CURVE('',#6196,#6249,#6251,.T.);-#6249 = VERTEX_POINT('',#6250);-#6250 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));-#6251 = SURFACE_CURVE('',#6252,(#6256,#6263),.PCURVE_S1.);-#6252 = LINE('',#6253,#6254);-#6253 = CARTESIAN_POINT('',(-2.2,-2.425,0.445));-#6254 = VECTOR('',#6255,1.);-#6255 = DIRECTION('',(0.,1.,0.));-#6256 = PCURVE('',#5980,#6257);-#6257 = DEFINITIONAL_REPRESENTATION('',(#6258),#6262);-#6258 = LINE('',#6259,#6260);-#6259 = CARTESIAN_POINT('',(0.,-0.15));-#6260 = VECTOR('',#6261,1.);-#6261 = DIRECTION('',(0.,1.));-#6262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6263 = PCURVE('',#6211,#6264);-#6264 = DEFINITIONAL_REPRESENTATION('',(#6265),#6269);-#6265 = LINE('',#6266,#6267);-#6266 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#6267 = VECTOR('',#6268,1.);-#6268 = DIRECTION('',(0.,1.));-#6269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6270 = ORIENTED_EDGE('',*,*,#6223,.T.);-#6271 = ORIENTED_EDGE('',*,*,#5962,.T.);-#6272 = ORIENTED_EDGE('',*,*,#6273,.F.);-#6273 = EDGE_CURVE('',#6249,#5965,#6274,.T.);-#6274 = SURFACE_CURVE('',#6275,(#6279,#6286),.PCURVE_S1.);-#6275 = LINE('',#6276,#6277);-#6276 = CARTESIAN_POINT('',(-2.2,-2.125,0.445));-#6277 = VECTOR('',#6278,1.);-#6278 = DIRECTION('',(1.,0.,0.));-#6279 = PCURVE('',#5980,#6280);-#6280 = DEFINITIONAL_REPRESENTATION('',(#6281),#6285);-#6281 = LINE('',#6282,#6283);-#6282 = CARTESIAN_POINT('',(0.,0.15));-#6283 = VECTOR('',#6284,1.);-#6284 = DIRECTION('',(1.,0.));-#6285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6286 = PCURVE('',#5947,#6287);-#6287 = DEFINITIONAL_REPRESENTATION('',(#6288),#6292);-#6288 = LINE('',#6289,#6290);-#6289 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#6290 = VECTOR('',#6291,1.);-#6291 = DIRECTION('',(0.,1.));-#6292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6293 = ADVANCED_FACE('',(#6294),#6077,.F.);-#6294 = FACE_BOUND('',#6295,.F.);-#6295 = EDGE_LOOP('',(#6296,#6297,#6320,#6341));-#6296 = ORIENTED_EDGE('',*,*,#6116,.T.);-#6297 = ORIENTED_EDGE('',*,*,#6298,.F.);-#6298 = EDGE_CURVE('',#6299,#6117,#6301,.T.);-#6299 = VERTEX_POINT('',#6300);-#6300 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#6301 = SURFACE_CURVE('',#6302,(#6306,#6313),.PCURVE_S1.);-#6302 = LINE('',#6303,#6304);-#6303 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#6304 = VECTOR('',#6305,1.);-#6305 = DIRECTION('',(0.,-1.,0.));-#6306 = PCURVE('',#6077,#6307);-#6307 = DEFINITIONAL_REPRESENTATION('',(#6308),#6312);-#6308 = LINE('',#6309,#6310);-#6309 = CARTESIAN_POINT('',(0.5675,0.15));-#6310 = VECTOR('',#6311,1.);-#6311 = DIRECTION('',(0.,-1.));-#6312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6313 = PCURVE('',#6155,#6314);-#6314 = DEFINITIONAL_REPRESENTATION('',(#6315),#6319);-#6315 = LINE('',#6316,#6317);-#6316 = CARTESIAN_POINT('',(0.,0.15));-#6317 = VECTOR('',#6318,1.);-#6318 = DIRECTION('',(0.,-1.));-#6319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6320 = ORIENTED_EDGE('',*,*,#6321,.F.);-#6321 = EDGE_CURVE('',#6062,#6299,#6322,.T.);+#6243 = ORIENTED_EDGE('',*,*,#6150,.T.);+#6244 = ORIENTED_EDGE('',*,*,#6070,.F.);+#6245 = ORIENTED_EDGE('',*,*,#6246,.T.);+#6246 = EDGE_CURVE('',#6043,#6222,#6247,.T.);+#6247 = SURFACE_CURVE('',#6248,(#6252,#6259),.PCURVE_S1.);+#6248 = LINE('',#6249,#6250);+#6249 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));+#6250 = VECTOR('',#6251,1.);+#6251 = DIRECTION('',(0.,-1.,0.));+#6252 = PCURVE('',#6086,#6253);+#6253 = DEFINITIONAL_REPRESENTATION('',(#6254),#6258);+#6254 = LINE('',#6255,#6256);+#6255 = CARTESIAN_POINT('',(0.,0.15));+#6256 = VECTOR('',#6257,1.);+#6257 = DIRECTION('',(0.,-1.));+#6258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6259 = PCURVE('',#6058,#6260);+#6260 = DEFINITIONAL_REPRESENTATION('',(#6261),#6265);+#6261 = LINE('',#6262,#6263);+#6262 = CARTESIAN_POINT('',(0.7175,0.15));+#6263 = VECTOR('',#6264,1.);+#6264 = DIRECTION('',(0.,-1.));+#6265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6266 = ADVANCED_FACE('',(#6267),#6058,.F.);+#6267 = FACE_BOUND('',#6268,.F.);+#6268 = EDGE_LOOP('',(#6269,#6292,#6293,#6294));+#6269 = ORIENTED_EDGE('',*,*,#6270,.T.);+#6270 = EDGE_CURVE('',#6271,#6222,#6273,.T.);+#6271 = VERTEX_POINT('',#6272);+#6272 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#6273 = SURFACE_CURVE('',#6274,(#6278,#6285),.PCURVE_S1.);+#6274 = LINE('',#6275,#6276);+#6275 = CARTESIAN_POINT('',(-3.205,-2.425,0.));+#6276 = VECTOR('',#6277,1.);+#6277 = DIRECTION('',(1.,0.,0.));+#6278 = PCURVE('',#6058,#6279);+#6279 = DEFINITIONAL_REPRESENTATION('',(#6280),#6284);+#6280 = LINE('',#6281,#6282);+#6281 = CARTESIAN_POINT('',(0.,-0.15));+#6282 = VECTOR('',#6283,1.);+#6283 = DIRECTION('',(1.,0.));+#6284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6285 = PCURVE('',#5893,#6286);+#6286 = DEFINITIONAL_REPRESENTATION('',(#6287),#6291);+#6287 = LINE('',#6288,#6289);+#6288 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6289 = VECTOR('',#6290,1.);+#6290 = DIRECTION('',(0.,1.));+#6291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6292 = ORIENTED_EDGE('',*,*,#6246,.F.);+#6293 = ORIENTED_EDGE('',*,*,#6042,.F.);+#6294 = ORIENTED_EDGE('',*,*,#6295,.T.);+#6295 = EDGE_CURVE('',#6015,#6271,#6296,.T.);+#6296 = SURFACE_CURVE('',#6297,(#6301,#6308),.PCURVE_S1.);+#6297 = LINE('',#6298,#6299);+#6298 = CARTESIAN_POINT('',(-3.205,-2.125,0.));+#6299 = VECTOR('',#6300,1.);+#6300 = DIRECTION('',(0.,-1.,0.));+#6301 = PCURVE('',#6058,#6302);+#6302 = DEFINITIONAL_REPRESENTATION('',(#6303),#6307);+#6303 = LINE('',#6304,#6305);+#6304 = CARTESIAN_POINT('',(0.,0.15));+#6305 = VECTOR('',#6306,1.);+#6306 = DIRECTION('',(0.,-1.));+#6307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6308 = PCURVE('',#6030,#6309);+#6309 = DEFINITIONAL_REPRESENTATION('',(#6310),#6314);+#6310 = LINE('',#6311,#6312);+#6311 = CARTESIAN_POINT('',(0.15,0.15));+#6312 = VECTOR('',#6313,1.);+#6313 = DIRECTION('',(0.,-1.));+#6314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6315 = ADVANCED_FACE('',(#6316),#6030,.F.);+#6316 = FACE_BOUND('',#6317,.F.);+#6317 = EDGE_LOOP('',(#6318,#6341,#6342,#6343));+#6318 = ORIENTED_EDGE('',*,*,#6319,.T.);+#6319 = EDGE_CURVE('',#6320,#6271,#6322,.T.);+#6320 = VERTEX_POINT('',#6321);+#6321 = CARTESIAN_POINT('',(-3.205,-2.425,0.15)); #6322 = SURFACE_CURVE('',#6323,(#6327,#6334),.PCURVE_S1.); #6323 = LINE('',#6324,#6325);-#6324 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#6324 = CARTESIAN_POINT('',(-3.205,-2.425,0.15)); #6325 = VECTOR('',#6326,1.);-#6326 = DIRECTION('',(-1.,0.,0.));-#6327 = PCURVE('',#6077,#6328);+#6326 = DIRECTION('',(0.,0.,-1.));+#6327 = PCURVE('',#6030,#6328); #6328 = DEFINITIONAL_REPRESENTATION('',(#6329),#6333); #6329 = LINE('',#6330,#6331);-#6330 = CARTESIAN_POINT('',(0.,0.15));+#6330 = CARTESIAN_POINT('',(0.,-0.15)); #6331 = VECTOR('',#6332,1.); #6332 = DIRECTION('',(1.,0.)); #6333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6334 = PCURVE('',#5947,#6335);+#6334 = PCURVE('',#5893,#6335); #6335 = DEFINITIONAL_REPRESENTATION('',(#6336),#6340); #6336 = LINE('',#6337,#6338);-#6337 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#6337 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #6338 = VECTOR('',#6339,1.);-#6339 = DIRECTION('',(0.,-1.));+#6339 = DIRECTION('',(1.,0.)); #6340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6341 = ORIENTED_EDGE('',*,*,#6061,.T.);-#6342 = ADVANCED_FACE('',(#6343),#5947,.F.);-#6343 = FACE_BOUND('',#6344,.F.);-#6344 = EDGE_LOOP('',(#6345,#6346,#6347,#6348,#6371,#6394,#6415,#6416));-#6345 = ORIENTED_EDGE('',*,*,#5933,.T.);-#6346 = ORIENTED_EDGE('',*,*,#6089,.T.);-#6347 = ORIENTED_EDGE('',*,*,#6321,.T.);-#6348 = ORIENTED_EDGE('',*,*,#6349,.T.);-#6349 = EDGE_CURVE('',#6299,#6350,#6352,.T.);-#6350 = VERTEX_POINT('',#6351);-#6351 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#6352 = SURFACE_CURVE('',#6353,(#6357,#6364),.PCURVE_S1.);-#6353 = LINE('',#6354,#6355);-#6354 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));-#6355 = VECTOR('',#6356,1.);-#6356 = DIRECTION('',(0.,0.,-1.));-#6357 = PCURVE('',#5947,#6358);+#6341 = ORIENTED_EDGE('',*,*,#6295,.F.);+#6342 = ORIENTED_EDGE('',*,*,#6014,.F.);+#6343 = ORIENTED_EDGE('',*,*,#6344,.T.);+#6344 = EDGE_CURVE('',#5987,#6320,#6345,.T.);+#6345 = SURFACE_CURVE('',#6346,(#6350,#6357),.PCURVE_S1.);+#6346 = LINE('',#6347,#6348);+#6347 = CARTESIAN_POINT('',(-3.205,-2.125,0.15));+#6348 = VECTOR('',#6349,1.);+#6349 = DIRECTION('',(0.,-1.,0.));+#6350 = PCURVE('',#6030,#6351);+#6351 = DEFINITIONAL_REPRESENTATION('',(#6352),#6356);+#6352 = LINE('',#6353,#6354);+#6353 = CARTESIAN_POINT('',(0.,0.15));+#6354 = VECTOR('',#6355,1.);+#6355 = DIRECTION('',(0.,-1.));+#6356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6357 = PCURVE('',#6002,#6358); #6358 = DEFINITIONAL_REPRESENTATION('',(#6359),#6363); #6359 = LINE('',#6360,#6361);-#6360 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6360 = CARTESIAN_POINT('',(0.5675,0.15)); #6361 = VECTOR('',#6362,1.);-#6362 = DIRECTION('',(1.,0.));+#6362 = DIRECTION('',(0.,-1.)); #6363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6364 = PCURVE('',#6155,#6365);-#6365 = DEFINITIONAL_REPRESENTATION('',(#6366),#6370);-#6366 = LINE('',#6367,#6368);-#6367 = CARTESIAN_POINT('',(0.,0.15));-#6368 = VECTOR('',#6369,1.);-#6369 = DIRECTION('',(1.,0.));-#6370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6371 = ORIENTED_EDGE('',*,*,#6372,.T.);-#6372 = EDGE_CURVE('',#6350,#6373,#6375,.T.);-#6373 = VERTEX_POINT('',#6374);-#6374 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#6375 = SURFACE_CURVE('',#6376,(#6380,#6387),.PCURVE_S1.);-#6376 = LINE('',#6377,#6378);-#6377 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#6378 = VECTOR('',#6379,1.);-#6379 = DIRECTION('',(1.,0.,0.));-#6380 = PCURVE('',#5947,#6381);-#6381 = DEFINITIONAL_REPRESENTATION('',(#6382),#6386);-#6382 = LINE('',#6383,#6384);-#6383 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#6384 = VECTOR('',#6385,1.);-#6385 = DIRECTION('',(0.,1.));-#6386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6387 = PCURVE('',#6183,#6388);-#6388 = DEFINITIONAL_REPRESENTATION('',(#6389),#6393);-#6389 = LINE('',#6390,#6391);-#6390 = CARTESIAN_POINT('',(0.,0.15));-#6391 = VECTOR('',#6392,1.);-#6392 = DIRECTION('',(1.,0.));-#6393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6394 = ORIENTED_EDGE('',*,*,#6395,.T.);-#6395 = EDGE_CURVE('',#6373,#6249,#6396,.T.);-#6396 = SURFACE_CURVE('',#6397,(#6401,#6408),.PCURVE_S1.);-#6397 = LINE('',#6398,#6399);-#6398 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#6399 = VECTOR('',#6400,1.);-#6400 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#6401 = PCURVE('',#5947,#6402);-#6402 = DEFINITIONAL_REPRESENTATION('',(#6403),#6407);-#6403 = LINE('',#6404,#6405);-#6404 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#6405 = VECTOR('',#6406,1.);-#6406 = DIRECTION('',(-0.839949759337,0.542664170358));-#6407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6408 = PCURVE('',#6211,#6409);-#6409 = DEFINITIONAL_REPRESENTATION('',(#6410),#6414);-#6410 = LINE('',#6411,#6412);-#6411 = CARTESIAN_POINT('',(0.,0.15));-#6412 = VECTOR('',#6413,1.);-#6413 = DIRECTION('',(1.,0.));-#6414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6415 = ORIENTED_EDGE('',*,*,#6273,.T.);-#6416 = ORIENTED_EDGE('',*,*,#6014,.T.);-#6417 = ADVANCED_FACE('',(#6418),#6155,.F.);-#6418 = FACE_BOUND('',#6419,.F.);-#6419 = EDGE_LOOP('',(#6420,#6421,#6442,#6443));-#6420 = ORIENTED_EDGE('',*,*,#6139,.T.);-#6421 = ORIENTED_EDGE('',*,*,#6422,.F.);-#6422 = EDGE_CURVE('',#6350,#6140,#6423,.T.);-#6423 = SURFACE_CURVE('',#6424,(#6428,#6435),.PCURVE_S1.);-#6424 = LINE('',#6425,#6426);-#6425 = CARTESIAN_POINT('',(-3.205,-2.125,0.));-#6426 = VECTOR('',#6427,1.);-#6427 = DIRECTION('',(0.,-1.,0.));-#6428 = PCURVE('',#6155,#6429);-#6429 = DEFINITIONAL_REPRESENTATION('',(#6430),#6434);-#6430 = LINE('',#6431,#6432);-#6431 = CARTESIAN_POINT('',(0.15,0.15));-#6432 = VECTOR('',#6433,1.);-#6433 = DIRECTION('',(0.,-1.));-#6434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6435 = PCURVE('',#6183,#6436);-#6436 = DEFINITIONAL_REPRESENTATION('',(#6437),#6441);-#6437 = LINE('',#6438,#6439);-#6438 = CARTESIAN_POINT('',(0.,0.15));-#6439 = VECTOR('',#6440,1.);-#6440 = DIRECTION('',(0.,-1.));-#6441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6442 = ORIENTED_EDGE('',*,*,#6349,.F.);-#6443 = ORIENTED_EDGE('',*,*,#6298,.T.);-#6444 = ADVANCED_FACE('',(#6445),#6183,.F.);-#6445 = FACE_BOUND('',#6446,.F.);-#6446 = EDGE_LOOP('',(#6447,#6448,#6469,#6470));-#6447 = ORIENTED_EDGE('',*,*,#6167,.T.);-#6448 = ORIENTED_EDGE('',*,*,#6449,.F.);-#6449 = EDGE_CURVE('',#6373,#6168,#6450,.T.);-#6450 = SURFACE_CURVE('',#6451,(#6455,#6462),.PCURVE_S1.);-#6451 = LINE('',#6452,#6453);-#6452 = CARTESIAN_POINT('',(-2.4875,-2.125,0.));-#6453 = VECTOR('',#6454,1.);-#6454 = DIRECTION('',(0.,-1.,0.));-#6455 = PCURVE('',#6183,#6456);-#6456 = DEFINITIONAL_REPRESENTATION('',(#6457),#6461);-#6457 = LINE('',#6458,#6459);-#6458 = CARTESIAN_POINT('',(0.7175,0.15));-#6459 = VECTOR('',#6460,1.);-#6460 = DIRECTION('',(0.,-1.));-#6461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6462 = PCURVE('',#6211,#6463);-#6463 = DEFINITIONAL_REPRESENTATION('',(#6464),#6468);-#6464 = LINE('',#6465,#6466);-#6465 = CARTESIAN_POINT('',(0.,0.15));-#6466 = VECTOR('',#6467,1.);-#6467 = DIRECTION('',(0.,-1.));-#6468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6469 = ORIENTED_EDGE('',*,*,#6372,.F.);-#6470 = ORIENTED_EDGE('',*,*,#6422,.T.);-#6471 = ADVANCED_FACE('',(#6472),#6211,.F.);+#6364 = ADVANCED_FACE('',(#6365),#6002,.F.);+#6365 = FACE_BOUND('',#6366,.F.);+#6366 = EDGE_LOOP('',(#6367,#6390,#6391,#6392));+#6367 = ORIENTED_EDGE('',*,*,#6368,.T.);+#6368 = EDGE_CURVE('',#6369,#6320,#6371,.T.);+#6369 = VERTEX_POINT('',#6370);+#6370 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#6371 = SURFACE_CURVE('',#6372,(#6376,#6383),.PCURVE_S1.);+#6372 = LINE('',#6373,#6374);+#6373 = CARTESIAN_POINT('',(-2.6375,-2.425,0.15));+#6374 = VECTOR('',#6375,1.);+#6375 = DIRECTION('',(-1.,0.,0.));+#6376 = PCURVE('',#6002,#6377);+#6377 = DEFINITIONAL_REPRESENTATION('',(#6378),#6382);+#6378 = LINE('',#6379,#6380);+#6379 = CARTESIAN_POINT('',(0.,-0.15));+#6380 = VECTOR('',#6381,1.);+#6381 = DIRECTION('',(1.,0.));+#6382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6383 = PCURVE('',#5893,#6384);+#6384 = DEFINITIONAL_REPRESENTATION('',(#6385),#6389);+#6385 = LINE('',#6386,#6387);+#6386 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#6387 = VECTOR('',#6388,1.);+#6388 = DIRECTION('',(0.,-1.));+#6389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6390 = ORIENTED_EDGE('',*,*,#6344,.F.);+#6391 = ORIENTED_EDGE('',*,*,#5986,.F.);+#6392 = ORIENTED_EDGE('',*,*,#6393,.T.);+#6393 = EDGE_CURVE('',#5964,#6369,#6394,.T.);+#6394 = SURFACE_CURVE('',#6395,(#6399,#6406),.PCURVE_S1.);+#6395 = LINE('',#6396,#6397);+#6396 = CARTESIAN_POINT('',(-2.6375,-2.125,0.15));+#6397 = VECTOR('',#6398,1.);+#6398 = DIRECTION('',(0.,-1.,0.));+#6399 = PCURVE('',#6002,#6400);+#6400 = DEFINITIONAL_REPRESENTATION('',(#6401),#6405);+#6401 = LINE('',#6402,#6403);+#6402 = CARTESIAN_POINT('',(0.,0.15));+#6403 = VECTOR('',#6404,1.);+#6404 = DIRECTION('',(0.,-1.));+#6405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6406 = PCURVE('',#5921,#6407);+#6407 = DEFINITIONAL_REPRESENTATION('',(#6408),#6412);+#6408 = LINE('',#6409,#6410);+#6409 = CARTESIAN_POINT('',(0.529793591883,0.15));+#6410 = VECTOR('',#6411,1.);+#6411 = DIRECTION('',(-0.,-1.));+#6412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6413 = ADVANCED_FACE('',(#6414),#5921,.F.);+#6414 = FACE_BOUND('',#6415,.F.);+#6415 = EDGE_LOOP('',(#6416,#6437,#6438,#6439));+#6416 = ORIENTED_EDGE('',*,*,#6417,.T.);+#6417 = EDGE_CURVE('',#5878,#6369,#6418,.T.);+#6418 = SURFACE_CURVE('',#6419,(#6423,#6430),.PCURVE_S1.);+#6419 = LINE('',#6420,#6421);+#6420 = CARTESIAN_POINT('',(-2.35,-2.425,0.595));+#6421 = VECTOR('',#6422,1.);+#6422 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#6423 = PCURVE('',#5921,#6424);+#6424 = DEFINITIONAL_REPRESENTATION('',(#6425),#6429);+#6425 = LINE('',#6426,#6427);+#6426 = CARTESIAN_POINT('',(-0.,-0.15));+#6427 = VECTOR('',#6428,1.);+#6428 = DIRECTION('',(1.,0.));+#6429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6430 = PCURVE('',#5893,#6431);+#6431 = DEFINITIONAL_REPRESENTATION('',(#6432),#6436);+#6432 = LINE('',#6433,#6434);+#6433 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#6434 = VECTOR('',#6435,1.);+#6435 = DIRECTION('',(0.839949759337,-0.542664170358));+#6436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6437 = ORIENTED_EDGE('',*,*,#6393,.F.);+#6438 = ORIENTED_EDGE('',*,*,#5963,.F.);+#6439 = ORIENTED_EDGE('',*,*,#5905,.T.);+#6440 = ADVANCED_FACE('',(#6441),#5893,.T.);+#6441 = FACE_BOUND('',#6442,.T.);+#6442 = EDGE_LOOP('',(#6443,#6444,#6445,#6446,#6447,#6448,#6449,#6450));+#6443 = ORIENTED_EDGE('',*,*,#5877,.T.);+#6444 = ORIENTED_EDGE('',*,*,#6417,.T.);+#6445 = ORIENTED_EDGE('',*,*,#6368,.T.);+#6446 = ORIENTED_EDGE('',*,*,#6319,.T.);+#6447 = ORIENTED_EDGE('',*,*,#6270,.T.);+#6448 = ORIENTED_EDGE('',*,*,#6221,.T.);+#6449 = ORIENTED_EDGE('',*,*,#6173,.T.);+#6450 = ORIENTED_EDGE('',*,*,#6451,.T.);+#6451 = EDGE_CURVE('',#6174,#5843,#6452,.T.);+#6452 = SURFACE_CURVE('',#6453,(#6457,#6464),.PCURVE_S1.);+#6453 = LINE('',#6454,#6455);+#6454 = CARTESIAN_POINT('',(-2.15,-2.425,0.445));+#6455 = VECTOR('',#6456,1.);+#6456 = DIRECTION('',(0.,0.,1.));+#6457 = PCURVE('',#5893,#6458);+#6458 = DEFINITIONAL_REPRESENTATION('',(#6459),#6463);+#6459 = LINE('',#6460,#6461);+#6460 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6461 = VECTOR('',#6462,1.);+#6462 = DIRECTION('',(-1.,0.));+#6463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6464 = PCURVE('',#5865,#6465);+#6465 = DEFINITIONAL_REPRESENTATION('',(#6466),#6470);+#6466 = LINE('',#6467,#6468);+#6467 = CARTESIAN_POINT('',(0.,-0.15));+#6468 = VECTOR('',#6469,1.);+#6469 = DIRECTION('',(1.,0.));+#6470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6471 = ADVANCED_FACE('',(#6472),#5865,.F.); #6472 = FACE_BOUND('',#6473,.F.); #6473 = EDGE_LOOP('',(#6474,#6475,#6476,#6477));-#6474 = ORIENTED_EDGE('',*,*,#6195,.T.);-#6475 = ORIENTED_EDGE('',*,*,#6248,.T.);-#6476 = ORIENTED_EDGE('',*,*,#6395,.F.);-#6477 = ORIENTED_EDGE('',*,*,#6449,.T.);+#6474 = ORIENTED_EDGE('',*,*,#6196,.F.);+#6475 = ORIENTED_EDGE('',*,*,#6451,.T.);+#6476 = ORIENTED_EDGE('',*,*,#5842,.T.);+#6477 = ORIENTED_EDGE('',*,*,#6126,.F.); #6478 = MANIFOLD_SOLID_BREP('',#6479);-#6479 = CLOSED_SHELL('',(#6480,#6600,#6676,#6752,#6886,#6935,#6984,#7059- ,#7086,#7113));+#6479 = CLOSED_SHELL('',(#6480,#6600,#6788,#6859,#6908,#6957,#7006,#7055+ ,#7082,#7113)); #6480 = ADVANCED_FACE('',(#6481),#6495,.F.); #6481 = FACE_BOUND('',#6482,.F.); #6482 = EDGE_LOOP('',(#6483,#6518,#6546,#6574));@@ -7612,609 +7612,609 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #6599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6600 = ADVANCED_FACE('',(#6601),#6507,.F.);+#6600 = ADVANCED_FACE('',(#6601),#6589,.F.); #6601 = FACE_BOUND('',#6602,.F.);-#6602 = EDGE_LOOP('',(#6603,#6633,#6654,#6655));-#6603 = ORIENTED_EDGE('',*,*,#6604,.F.);-#6604 = EDGE_CURVE('',#6605,#6607,#6609,.T.);-#6605 = VERTEX_POINT('',#6606);-#6606 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#6607 = VERTEX_POINT('',#6608);-#6608 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));-#6609 = SURFACE_CURVE('',#6610,(#6614,#6621),.PCURVE_S1.);-#6610 = LINE('',#6611,#6612);-#6611 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#6612 = VECTOR('',#6613,1.);-#6613 = DIRECTION('',(0.,1.,0.));-#6614 = PCURVE('',#6507,#6615);-#6615 = DEFINITIONAL_REPRESENTATION('',(#6616),#6620);-#6616 = LINE('',#6617,#6618);-#6617 = CARTESIAN_POINT('',(0.,-0.15));-#6618 = VECTOR('',#6619,1.);-#6619 = DIRECTION('',(0.,1.));-#6620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6621 = PCURVE('',#6622,#6627);-#6622 = PLANE('',#6623);-#6623 = AXIS2_PLACEMENT_3D('',#6624,#6625,#6626);-#6624 = CARTESIAN_POINT('',(-2.2,-2.925,0.445));-#6625 = DIRECTION('',(-0.,0.,1.));-#6626 = DIRECTION('',(1.,0.,0.));-#6627 = DEFINITIONAL_REPRESENTATION('',(#6628),#6632);-#6628 = LINE('',#6629,#6630);-#6629 = CARTESIAN_POINT('',(5.E-02,-0.15));-#6630 = VECTOR('',#6631,1.);-#6631 = DIRECTION('',(0.,1.));-#6632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6633 = ORIENTED_EDGE('',*,*,#6634,.T.);-#6634 = EDGE_CURVE('',#6605,#6485,#6635,.T.);-#6635 = SURFACE_CURVE('',#6636,(#6640,#6647),.PCURVE_S1.);-#6636 = LINE('',#6637,#6638);-#6637 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));-#6638 = VECTOR('',#6639,1.);-#6639 = DIRECTION('',(0.,0.,1.));-#6640 = PCURVE('',#6507,#6641);-#6641 = DEFINITIONAL_REPRESENTATION('',(#6642),#6646);-#6642 = LINE('',#6643,#6644);-#6643 = CARTESIAN_POINT('',(0.,-0.15));-#6644 = VECTOR('',#6645,1.);-#6645 = DIRECTION('',(1.,0.));-#6646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6647 = PCURVE('',#6535,#6648);-#6648 = DEFINITIONAL_REPRESENTATION('',(#6649),#6653);-#6649 = LINE('',#6650,#6651);-#6650 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#6651 = VECTOR('',#6652,1.);-#6652 = DIRECTION('',(-1.,0.));-#6653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6654 = ORIENTED_EDGE('',*,*,#6484,.T.);-#6655 = ORIENTED_EDGE('',*,*,#6656,.F.);-#6656 = EDGE_CURVE('',#6607,#6487,#6657,.T.);-#6657 = SURFACE_CURVE('',#6658,(#6662,#6669),.PCURVE_S1.);-#6658 = LINE('',#6659,#6660);-#6659 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));-#6660 = VECTOR('',#6661,1.);-#6661 = DIRECTION('',(0.,0.,1.));-#6662 = PCURVE('',#6507,#6663);-#6663 = DEFINITIONAL_REPRESENTATION('',(#6664),#6668);-#6664 = LINE('',#6665,#6666);-#6665 = CARTESIAN_POINT('',(0.,0.15));-#6666 = VECTOR('',#6667,1.);-#6667 = DIRECTION('',(1.,0.));-#6668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6669 = PCURVE('',#6589,#6670);-#6670 = DEFINITIONAL_REPRESENTATION('',(#6671),#6675);-#6671 = LINE('',#6672,#6673);-#6672 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));-#6673 = VECTOR('',#6674,1.);-#6674 = DIRECTION('',(-1.,0.));-#6675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6676 = ADVANCED_FACE('',(#6677),#6563,.F.);-#6677 = FACE_BOUND('',#6678,.F.);-#6678 = EDGE_LOOP('',(#6679,#6702,#6730,#6751));-#6679 = ORIENTED_EDGE('',*,*,#6680,.T.);-#6680 = EDGE_CURVE('',#6520,#6681,#6683,.T.);-#6681 = VERTEX_POINT('',#6682);-#6682 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));-#6683 = SURFACE_CURVE('',#6684,(#6688,#6695),.PCURVE_S1.);-#6684 = LINE('',#6685,#6686);-#6685 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));-#6686 = VECTOR('',#6687,1.);-#6687 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#6688 = PCURVE('',#6563,#6689);-#6689 = DEFINITIONAL_REPRESENTATION('',(#6690),#6694);-#6690 = LINE('',#6691,#6692);-#6691 = CARTESIAN_POINT('',(-0.,-0.15));-#6692 = VECTOR('',#6693,1.);-#6693 = DIRECTION('',(1.,0.));-#6694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6695 = PCURVE('',#6535,#6696);-#6696 = DEFINITIONAL_REPRESENTATION('',(#6697),#6701);-#6697 = LINE('',#6698,#6699);-#6698 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#6699 = VECTOR('',#6700,1.);-#6700 = DIRECTION('',(0.839949759337,-0.542664170358));-#6701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6702 = ORIENTED_EDGE('',*,*,#6703,.F.);-#6703 = EDGE_CURVE('',#6704,#6681,#6706,.T.);-#6704 = VERTEX_POINT('',#6705);-#6705 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));-#6706 = SURFACE_CURVE('',#6707,(#6711,#6718),.PCURVE_S1.);-#6707 = LINE('',#6708,#6709);-#6708 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));-#6709 = VECTOR('',#6710,1.);-#6710 = DIRECTION('',(0.,-1.,0.));-#6711 = PCURVE('',#6563,#6712);-#6712 = DEFINITIONAL_REPRESENTATION('',(#6713),#6717);-#6713 = LINE('',#6714,#6715);-#6714 = CARTESIAN_POINT('',(0.529793591883,0.15));-#6715 = VECTOR('',#6716,1.);-#6716 = DIRECTION('',(-0.,-1.));-#6717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6718 = PCURVE('',#6719,#6724);-#6719 = PLANE('',#6720);-#6720 = AXIS2_PLACEMENT_3D('',#6721,#6722,#6723);-#6721 = CARTESIAN_POINT('',(-2.6375,-2.925,0.15));-#6722 = DIRECTION('',(-0.,-0.,-1.));-#6723 = DIRECTION('',(-1.,0.,0.));-#6724 = DEFINITIONAL_REPRESENTATION('',(#6725),#6729);-#6725 = LINE('',#6726,#6727);-#6726 = CARTESIAN_POINT('',(0.,0.15));-#6727 = VECTOR('',#6728,1.);-#6728 = DIRECTION('',(0.,-1.));-#6729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6730 = ORIENTED_EDGE('',*,*,#6731,.F.);-#6731 = EDGE_CURVE('',#6548,#6704,#6732,.T.);-#6732 = SURFACE_CURVE('',#6733,(#6737,#6744),.PCURVE_S1.);-#6733 = LINE('',#6734,#6735);-#6734 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));-#6735 = VECTOR('',#6736,1.);-#6736 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));-#6737 = PCURVE('',#6563,#6738);-#6738 = DEFINITIONAL_REPRESENTATION('',(#6739),#6743);-#6739 = LINE('',#6740,#6741);-#6740 = CARTESIAN_POINT('',(0.,0.15));-#6741 = VECTOR('',#6742,1.);-#6742 = DIRECTION('',(1.,0.));-#6743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6744 = PCURVE('',#6589,#6745);-#6745 = DEFINITIONAL_REPRESENTATION('',(#6746),#6750);-#6746 = LINE('',#6747,#6748);-#6747 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));-#6748 = VECTOR('',#6749,1.);-#6749 = DIRECTION('',(0.839949759337,-0.542664170358));-#6750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6751 = ORIENTED_EDGE('',*,*,#6547,.T.);-#6752 = ADVANCED_FACE('',(#6753),#6535,.T.);-#6753 = FACE_BOUND('',#6754,.T.);-#6754 = EDGE_LOOP('',(#6755,#6756,#6757,#6780,#6808,#6836,#6864,#6885));-#6755 = ORIENTED_EDGE('',*,*,#6519,.T.);-#6756 = ORIENTED_EDGE('',*,*,#6680,.T.);-#6757 = ORIENTED_EDGE('',*,*,#6758,.T.);-#6758 = EDGE_CURVE('',#6681,#6759,#6761,.T.);-#6759 = VERTEX_POINT('',#6760);-#6760 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));-#6761 = SURFACE_CURVE('',#6762,(#6766,#6773),.PCURVE_S1.);+#6602 = EDGE_LOOP('',(#6603,#6604,#6627,#6655,#6683,#6711,#6739,#6767));+#6603 = ORIENTED_EDGE('',*,*,#6575,.T.);+#6604 = ORIENTED_EDGE('',*,*,#6605,.T.);+#6605 = EDGE_CURVE('',#6548,#6606,#6608,.T.);+#6606 = VERTEX_POINT('',#6607);+#6607 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6608 = SURFACE_CURVE('',#6609,(#6613,#6620),.PCURVE_S1.);+#6609 = LINE('',#6610,#6611);+#6610 = CARTESIAN_POINT('',(-2.35,-2.775,0.595));+#6611 = VECTOR('',#6612,1.);+#6612 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#6613 = PCURVE('',#6589,#6614);+#6614 = DEFINITIONAL_REPRESENTATION('',(#6615),#6619);+#6615 = LINE('',#6616,#6617);+#6616 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#6617 = VECTOR('',#6618,1.);+#6618 = DIRECTION('',(0.839949759337,-0.542664170358));+#6619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6620 = PCURVE('',#6563,#6621);+#6621 = DEFINITIONAL_REPRESENTATION('',(#6622),#6626);+#6622 = LINE('',#6623,#6624);+#6623 = CARTESIAN_POINT('',(0.,0.15));+#6624 = VECTOR('',#6625,1.);+#6625 = DIRECTION('',(1.,0.));+#6626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6627 = ORIENTED_EDGE('',*,*,#6628,.T.);+#6628 = EDGE_CURVE('',#6606,#6629,#6631,.T.);+#6629 = VERTEX_POINT('',#6630);+#6630 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6631 = SURFACE_CURVE('',#6632,(#6636,#6643),.PCURVE_S1.);+#6632 = LINE('',#6633,#6634);+#6633 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6634 = VECTOR('',#6635,1.);+#6635 = DIRECTION('',(-1.,0.,0.));+#6636 = PCURVE('',#6589,#6637);+#6637 = DEFINITIONAL_REPRESENTATION('',(#6638),#6642);+#6638 = LINE('',#6639,#6640);+#6639 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#6640 = VECTOR('',#6641,1.);+#6641 = DIRECTION('',(0.,-1.));+#6642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6643 = PCURVE('',#6644,#6649);+#6644 = PLANE('',#6645);+#6645 = AXIS2_PLACEMENT_3D('',#6646,#6647,#6648);+#6646 = CARTESIAN_POINT('',(-2.6375,-2.925,0.15));+#6647 = DIRECTION('',(-0.,-0.,-1.));+#6648 = DIRECTION('',(-1.,0.,0.));+#6649 = DEFINITIONAL_REPRESENTATION('',(#6650),#6654);+#6650 = LINE('',#6651,#6652);+#6651 = CARTESIAN_POINT('',(0.,0.15));+#6652 = VECTOR('',#6653,1.);+#6653 = DIRECTION('',(1.,0.));+#6654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6655 = ORIENTED_EDGE('',*,*,#6656,.T.);+#6656 = EDGE_CURVE('',#6629,#6657,#6659,.T.);+#6657 = VERTEX_POINT('',#6658);+#6658 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6659 = SURFACE_CURVE('',#6660,(#6664,#6671),.PCURVE_S1.);+#6660 = LINE('',#6661,#6662);+#6661 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6662 = VECTOR('',#6663,1.);+#6663 = DIRECTION('',(0.,0.,-1.));+#6664 = PCURVE('',#6589,#6665);+#6665 = DEFINITIONAL_REPRESENTATION('',(#6666),#6670);+#6666 = LINE('',#6667,#6668);+#6667 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#6668 = VECTOR('',#6669,1.);+#6669 = DIRECTION('',(1.,0.));+#6670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6671 = PCURVE('',#6672,#6677);+#6672 = PLANE('',#6673);+#6673 = AXIS2_PLACEMENT_3D('',#6674,#6675,#6676);+#6674 = CARTESIAN_POINT('',(-3.205,-2.925,0.15));+#6675 = DIRECTION('',(1.,0.,0.));+#6676 = DIRECTION('',(0.,0.,-1.));+#6677 = DEFINITIONAL_REPRESENTATION('',(#6678),#6682);+#6678 = LINE('',#6679,#6680);+#6679 = CARTESIAN_POINT('',(0.,0.15));+#6680 = VECTOR('',#6681,1.);+#6681 = DIRECTION('',(1.,0.));+#6682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6683 = ORIENTED_EDGE('',*,*,#6684,.T.);+#6684 = EDGE_CURVE('',#6657,#6685,#6687,.T.);+#6685 = VERTEX_POINT('',#6686);+#6686 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6687 = SURFACE_CURVE('',#6688,(#6692,#6699),.PCURVE_S1.);+#6688 = LINE('',#6689,#6690);+#6689 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6690 = VECTOR('',#6691,1.);+#6691 = DIRECTION('',(1.,0.,0.));+#6692 = PCURVE('',#6589,#6693);+#6693 = DEFINITIONAL_REPRESENTATION('',(#6694),#6698);+#6694 = LINE('',#6695,#6696);+#6695 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6696 = VECTOR('',#6697,1.);+#6697 = DIRECTION('',(0.,1.));+#6698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6699 = PCURVE('',#6700,#6705);+#6700 = PLANE('',#6701);+#6701 = AXIS2_PLACEMENT_3D('',#6702,#6703,#6704);+#6702 = CARTESIAN_POINT('',(-3.205,-2.925,0.));+#6703 = DIRECTION('',(-0.,0.,1.));+#6704 = DIRECTION('',(1.,0.,0.));+#6705 = DEFINITIONAL_REPRESENTATION('',(#6706),#6710);+#6706 = LINE('',#6707,#6708);+#6707 = CARTESIAN_POINT('',(0.,0.15));+#6708 = VECTOR('',#6709,1.);+#6709 = DIRECTION('',(1.,0.));+#6710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6711 = ORIENTED_EDGE('',*,*,#6712,.T.);+#6712 = EDGE_CURVE('',#6685,#6713,#6715,.T.);+#6713 = VERTEX_POINT('',#6714);+#6714 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#6715 = SURFACE_CURVE('',#6716,(#6720,#6727),.PCURVE_S1.);+#6716 = LINE('',#6717,#6718);+#6717 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6718 = VECTOR('',#6719,1.);+#6719 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6720 = PCURVE('',#6589,#6721);+#6721 = DEFINITIONAL_REPRESENTATION('',(#6722),#6726);+#6722 = LINE('',#6723,#6724);+#6723 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));+#6724 = VECTOR('',#6725,1.);+#6725 = DIRECTION('',(-0.839949759337,0.542664170358));+#6726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6727 = PCURVE('',#6728,#6733);+#6728 = PLANE('',#6729);+#6729 = AXIS2_PLACEMENT_3D('',#6730,#6731,#6732);+#6730 = CARTESIAN_POINT('',(-2.4875,-2.925,0.));+#6731 = DIRECTION('',(-0.839949759337,0.,0.542664170358));+#6732 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6733 = DEFINITIONAL_REPRESENTATION('',(#6734),#6738);+#6734 = LINE('',#6735,#6736);+#6735 = CARTESIAN_POINT('',(0.,0.15));+#6736 = VECTOR('',#6737,1.);+#6737 = DIRECTION('',(1.,0.));+#6738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6739 = ORIENTED_EDGE('',*,*,#6740,.T.);+#6740 = EDGE_CURVE('',#6713,#6741,#6743,.T.);+#6741 = VERTEX_POINT('',#6742);+#6742 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#6743 = SURFACE_CURVE('',#6744,(#6748,#6755),.PCURVE_S1.);+#6744 = LINE('',#6745,#6746);+#6745 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));+#6746 = VECTOR('',#6747,1.);+#6747 = DIRECTION('',(1.,0.,0.));+#6748 = PCURVE('',#6589,#6749);+#6749 = DEFINITIONAL_REPRESENTATION('',(#6750),#6754);+#6750 = LINE('',#6751,#6752);+#6751 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6752 = VECTOR('',#6753,1.);+#6753 = DIRECTION('',(0.,1.));+#6754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6755 = PCURVE('',#6756,#6761);+#6756 = PLANE('',#6757);+#6757 = AXIS2_PLACEMENT_3D('',#6758,#6759,#6760);+#6758 = CARTESIAN_POINT('',(-2.2,-2.925,0.445));+#6759 = DIRECTION('',(-0.,0.,1.));+#6760 = DIRECTION('',(1.,0.,0.));+#6761 = DEFINITIONAL_REPRESENTATION('',(#6762),#6766); #6762 = LINE('',#6763,#6764);-#6763 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#6763 = CARTESIAN_POINT('',(0.,0.15)); #6764 = VECTOR('',#6765,1.);-#6765 = DIRECTION('',(-1.,0.,0.));-#6766 = PCURVE('',#6535,#6767);-#6767 = DEFINITIONAL_REPRESENTATION('',(#6768),#6772);-#6768 = LINE('',#6769,#6770);-#6769 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));-#6770 = VECTOR('',#6771,1.);-#6771 = DIRECTION('',(0.,-1.));-#6772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6773 = PCURVE('',#6719,#6774);-#6774 = DEFINITIONAL_REPRESENTATION('',(#6775),#6779);-#6775 = LINE('',#6776,#6777);-#6776 = CARTESIAN_POINT('',(0.,-0.15));-#6777 = VECTOR('',#6778,1.);-#6778 = DIRECTION('',(1.,0.));-#6779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6780 = ORIENTED_EDGE('',*,*,#6781,.T.);-#6781 = EDGE_CURVE('',#6759,#6782,#6784,.T.);-#6782 = VERTEX_POINT('',#6783);-#6783 = CARTESIAN_POINT('',(-3.205,-3.075,0.));-#6784 = SURFACE_CURVE('',#6785,(#6789,#6796),.PCURVE_S1.);-#6785 = LINE('',#6786,#6787);-#6786 = CARTESIAN_POINT('',(-3.205,-3.075,0.15));-#6787 = VECTOR('',#6788,1.);-#6788 = DIRECTION('',(0.,0.,-1.));-#6789 = PCURVE('',#6535,#6790);-#6790 = DEFINITIONAL_REPRESENTATION('',(#6791),#6795);-#6791 = LINE('',#6792,#6793);-#6792 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));-#6793 = VECTOR('',#6794,1.);-#6794 = DIRECTION('',(1.,0.));-#6795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6796 = PCURVE('',#6797,#6802);-#6797 = PLANE('',#6798);-#6798 = AXIS2_PLACEMENT_3D('',#6799,#6800,#6801);-#6799 = CARTESIAN_POINT('',(-3.205,-2.925,0.15));-#6800 = DIRECTION('',(1.,0.,0.));-#6801 = DIRECTION('',(0.,0.,-1.));-#6802 = DEFINITIONAL_REPRESENTATION('',(#6803),#6807);-#6803 = LINE('',#6804,#6805);-#6804 = CARTESIAN_POINT('',(0.,-0.15));-#6805 = VECTOR('',#6806,1.);-#6806 = DIRECTION('',(1.,0.));-#6807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6808 = ORIENTED_EDGE('',*,*,#6809,.T.);-#6809 = EDGE_CURVE('',#6782,#6810,#6812,.T.);-#6810 = VERTEX_POINT('',#6811);-#6811 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));-#6812 = SURFACE_CURVE('',#6813,(#6817,#6824),.PCURVE_S1.);-#6813 = LINE('',#6814,#6815);-#6814 = CARTESIAN_POINT('',(-3.205,-3.075,0.));-#6815 = VECTOR('',#6816,1.);-#6816 = DIRECTION('',(1.,0.,0.));-#6817 = PCURVE('',#6535,#6818);-#6818 = DEFINITIONAL_REPRESENTATION('',(#6819),#6823);+#6765 = DIRECTION('',(1.,0.));+#6766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6767 = ORIENTED_EDGE('',*,*,#6768,.T.);+#6768 = EDGE_CURVE('',#6741,#6487,#6769,.T.);+#6769 = SURFACE_CURVE('',#6770,(#6774,#6781),.PCURVE_S1.);+#6770 = LINE('',#6771,#6772);+#6771 = CARTESIAN_POINT('',(-2.15,-2.775,0.445));+#6772 = VECTOR('',#6773,1.);+#6773 = DIRECTION('',(0.,0.,1.));+#6774 = PCURVE('',#6589,#6775);+#6775 = DEFINITIONAL_REPRESENTATION('',(#6776),#6780);+#6776 = LINE('',#6777,#6778);+#6777 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#6778 = VECTOR('',#6779,1.);+#6779 = DIRECTION('',(-1.,0.));+#6780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6781 = PCURVE('',#6507,#6782);+#6782 = DEFINITIONAL_REPRESENTATION('',(#6783),#6787);+#6783 = LINE('',#6784,#6785);+#6784 = CARTESIAN_POINT('',(0.,0.15));+#6785 = VECTOR('',#6786,1.);+#6786 = DIRECTION('',(1.,0.));+#6787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6788 = ADVANCED_FACE('',(#6789),#6756,.F.);+#6789 = FACE_BOUND('',#6790,.F.);+#6790 = EDGE_LOOP('',(#6791,#6814,#6837,#6858));+#6791 = ORIENTED_EDGE('',*,*,#6792,.F.);+#6792 = EDGE_CURVE('',#6793,#6713,#6795,.T.);+#6793 = VERTEX_POINT('',#6794);+#6794 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6795 = SURFACE_CURVE('',#6796,(#6800,#6807),.PCURVE_S1.);+#6796 = LINE('',#6797,#6798);+#6797 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6798 = VECTOR('',#6799,1.);+#6799 = DIRECTION('',(0.,1.,0.));+#6800 = PCURVE('',#6756,#6801);+#6801 = DEFINITIONAL_REPRESENTATION('',(#6802),#6806);+#6802 = LINE('',#6803,#6804);+#6803 = CARTESIAN_POINT('',(0.,-0.15));+#6804 = VECTOR('',#6805,1.);+#6805 = DIRECTION('',(0.,1.));+#6806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6807 = PCURVE('',#6728,#6808);+#6808 = DEFINITIONAL_REPRESENTATION('',(#6809),#6813);+#6809 = LINE('',#6810,#6811);+#6810 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#6811 = VECTOR('',#6812,1.);+#6812 = DIRECTION('',(0.,1.));+#6813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6814 = ORIENTED_EDGE('',*,*,#6815,.T.);+#6815 = EDGE_CURVE('',#6793,#6816,#6818,.T.);+#6816 = VERTEX_POINT('',#6817);+#6817 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#6818 = SURFACE_CURVE('',#6819,(#6823,#6830),.PCURVE_S1.); #6819 = LINE('',#6820,#6821);-#6820 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6820 = CARTESIAN_POINT('',(-2.2,-3.075,0.445)); #6821 = VECTOR('',#6822,1.);-#6822 = DIRECTION('',(0.,1.));-#6823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6824 = PCURVE('',#6825,#6830);-#6825 = PLANE('',#6826);-#6826 = AXIS2_PLACEMENT_3D('',#6827,#6828,#6829);-#6827 = CARTESIAN_POINT('',(-3.205,-2.925,0.));-#6828 = DIRECTION('',(-0.,0.,1.));-#6829 = DIRECTION('',(1.,0.,0.));-#6830 = DEFINITIONAL_REPRESENTATION('',(#6831),#6835);-#6831 = LINE('',#6832,#6833);-#6832 = CARTESIAN_POINT('',(0.,-0.15));-#6833 = VECTOR('',#6834,1.);-#6834 = DIRECTION('',(1.,0.));-#6835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6836 = ORIENTED_EDGE('',*,*,#6837,.T.);-#6837 = EDGE_CURVE('',#6810,#6838,#6840,.T.);-#6838 = VERTEX_POINT('',#6839);-#6839 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));-#6840 = SURFACE_CURVE('',#6841,(#6845,#6852),.PCURVE_S1.);-#6841 = LINE('',#6842,#6843);-#6842 = CARTESIAN_POINT('',(-2.4875,-3.075,0.));-#6843 = VECTOR('',#6844,1.);-#6844 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#6845 = PCURVE('',#6535,#6846);-#6846 = DEFINITIONAL_REPRESENTATION('',(#6847),#6851);-#6847 = LINE('',#6848,#6849);-#6848 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#6849 = VECTOR('',#6850,1.);-#6850 = DIRECTION('',(-0.839949759337,0.542664170358));-#6851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6852 = PCURVE('',#6853,#6858);-#6853 = PLANE('',#6854);-#6854 = AXIS2_PLACEMENT_3D('',#6855,#6856,#6857);-#6855 = CARTESIAN_POINT('',(-2.4875,-2.925,0.));-#6856 = DIRECTION('',(-0.839949759337,0.,0.542664170358));-#6857 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#6858 = DEFINITIONAL_REPRESENTATION('',(#6859),#6863);-#6859 = LINE('',#6860,#6861);-#6860 = CARTESIAN_POINT('',(0.,-0.15));-#6861 = VECTOR('',#6862,1.);-#6862 = DIRECTION('',(1.,0.));-#6863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6864 = ORIENTED_EDGE('',*,*,#6865,.T.);-#6865 = EDGE_CURVE('',#6838,#6605,#6866,.T.);+#6822 = DIRECTION('',(1.,0.,0.));+#6823 = PCURVE('',#6756,#6824);+#6824 = DEFINITIONAL_REPRESENTATION('',(#6825),#6829);+#6825 = LINE('',#6826,#6827);+#6826 = CARTESIAN_POINT('',(0.,-0.15));+#6827 = VECTOR('',#6828,1.);+#6828 = DIRECTION('',(1.,0.));+#6829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6830 = PCURVE('',#6535,#6831);+#6831 = DEFINITIONAL_REPRESENTATION('',(#6832),#6836);+#6832 = LINE('',#6833,#6834);+#6833 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6834 = VECTOR('',#6835,1.);+#6835 = DIRECTION('',(0.,1.));+#6836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6837 = ORIENTED_EDGE('',*,*,#6838,.T.);+#6838 = EDGE_CURVE('',#6816,#6741,#6839,.T.);+#6839 = SURFACE_CURVE('',#6840,(#6844,#6851),.PCURVE_S1.);+#6840 = LINE('',#6841,#6842);+#6841 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#6842 = VECTOR('',#6843,1.);+#6843 = DIRECTION('',(0.,1.,0.));+#6844 = PCURVE('',#6756,#6845);+#6845 = DEFINITIONAL_REPRESENTATION('',(#6846),#6850);+#6846 = LINE('',#6847,#6848);+#6847 = CARTESIAN_POINT('',(5.E-02,-0.15));+#6848 = VECTOR('',#6849,1.);+#6849 = DIRECTION('',(0.,1.));+#6850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6851 = PCURVE('',#6507,#6852);+#6852 = DEFINITIONAL_REPRESENTATION('',(#6853),#6857);+#6853 = LINE('',#6854,#6855);+#6854 = CARTESIAN_POINT('',(0.,-0.15));+#6855 = VECTOR('',#6856,1.);+#6856 = DIRECTION('',(0.,1.));+#6857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6858 = ORIENTED_EDGE('',*,*,#6740,.F.);+#6859 = ADVANCED_FACE('',(#6860),#6728,.F.);+#6860 = FACE_BOUND('',#6861,.F.);+#6861 = EDGE_LOOP('',(#6862,#6885,#6886,#6887));+#6862 = ORIENTED_EDGE('',*,*,#6863,.T.);+#6863 = EDGE_CURVE('',#6864,#6793,#6866,.T.);+#6864 = VERTEX_POINT('',#6865);+#6865 = CARTESIAN_POINT('',(-2.4875,-3.075,0.)); #6866 = SURFACE_CURVE('',#6867,(#6871,#6878),.PCURVE_S1.); #6867 = LINE('',#6868,#6869);-#6868 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));+#6868 = CARTESIAN_POINT('',(-2.4875,-3.075,0.)); #6869 = VECTOR('',#6870,1.);-#6870 = DIRECTION('',(1.,0.,0.));-#6871 = PCURVE('',#6535,#6872);+#6870 = DIRECTION('',(0.542664170358,0.,0.839949759337));+#6871 = PCURVE('',#6728,#6872); #6872 = DEFINITIONAL_REPRESENTATION('',(#6873),#6877); #6873 = LINE('',#6874,#6875);-#6874 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));+#6874 = CARTESIAN_POINT('',(0.,-0.15)); #6875 = VECTOR('',#6876,1.);-#6876 = DIRECTION('',(0.,1.));+#6876 = DIRECTION('',(1.,0.)); #6877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6878 = PCURVE('',#6622,#6879);+#6878 = PCURVE('',#6535,#6879); #6879 = DEFINITIONAL_REPRESENTATION('',(#6880),#6884); #6880 = LINE('',#6881,#6882);-#6881 = CARTESIAN_POINT('',(0.,-0.15));+#6881 = CARTESIAN_POINT('',(0.217942023204,0.146682274245)); #6882 = VECTOR('',#6883,1.);-#6883 = DIRECTION('',(1.,0.));+#6883 = DIRECTION('',(-0.839949759337,0.542664170358)); #6884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6885 = ORIENTED_EDGE('',*,*,#6634,.T.);-#6886 = ADVANCED_FACE('',(#6887),#6622,.F.);-#6887 = FACE_BOUND('',#6888,.F.);-#6888 = EDGE_LOOP('',(#6889,#6912,#6913,#6914));-#6889 = ORIENTED_EDGE('',*,*,#6890,.F.);-#6890 = EDGE_CURVE('',#6838,#6891,#6893,.T.);-#6891 = VERTEX_POINT('',#6892);-#6892 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));-#6893 = SURFACE_CURVE('',#6894,(#6898,#6905),.PCURVE_S1.);-#6894 = LINE('',#6895,#6896);-#6895 = CARTESIAN_POINT('',(-2.2,-3.075,0.445));-#6896 = VECTOR('',#6897,1.);-#6897 = DIRECTION('',(0.,1.,0.));-#6898 = PCURVE('',#6622,#6899);-#6899 = DEFINITIONAL_REPRESENTATION('',(#6900),#6904);-#6900 = LINE('',#6901,#6902);-#6901 = CARTESIAN_POINT('',(0.,-0.15));-#6902 = VECTOR('',#6903,1.);-#6903 = DIRECTION('',(0.,1.));-#6904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6905 = PCURVE('',#6853,#6906);-#6906 = DEFINITIONAL_REPRESENTATION('',(#6907),#6911);-#6907 = LINE('',#6908,#6909);-#6908 = CARTESIAN_POINT('',(0.529793591883,-0.15));-#6909 = VECTOR('',#6910,1.);-#6910 = DIRECTION('',(0.,1.));-#6911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6912 = ORIENTED_EDGE('',*,*,#6865,.T.);-#6913 = ORIENTED_EDGE('',*,*,#6604,.T.);-#6914 = ORIENTED_EDGE('',*,*,#6915,.F.);-#6915 = EDGE_CURVE('',#6891,#6607,#6916,.T.);-#6916 = SURFACE_CURVE('',#6917,(#6921,#6928),.PCURVE_S1.);-#6917 = LINE('',#6918,#6919);-#6918 = CARTESIAN_POINT('',(-2.2,-2.775,0.445));-#6919 = VECTOR('',#6920,1.);-#6920 = DIRECTION('',(1.,0.,0.));-#6921 = PCURVE('',#6622,#6922);-#6922 = DEFINITIONAL_REPRESENTATION('',(#6923),#6927);-#6923 = LINE('',#6924,#6925);-#6924 = CARTESIAN_POINT('',(0.,0.15));-#6925 = VECTOR('',#6926,1.);-#6926 = DIRECTION('',(1.,0.));-#6927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6928 = PCURVE('',#6589,#6929);-#6929 = DEFINITIONAL_REPRESENTATION('',(#6930),#6934);-#6930 = LINE('',#6931,#6932);-#6931 = CARTESIAN_POINT('',(-0.227057976796,0.434182274245));-#6932 = VECTOR('',#6933,1.);-#6933 = DIRECTION('',(0.,1.));-#6934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6935 = ADVANCED_FACE('',(#6936),#6719,.F.);-#6936 = FACE_BOUND('',#6937,.F.);-#6937 = EDGE_LOOP('',(#6938,#6939,#6962,#6983));-#6938 = ORIENTED_EDGE('',*,*,#6758,.T.);-#6939 = ORIENTED_EDGE('',*,*,#6940,.F.);-#6940 = EDGE_CURVE('',#6941,#6759,#6943,.T.);-#6941 = VERTEX_POINT('',#6942);-#6942 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#6943 = SURFACE_CURVE('',#6944,(#6948,#6955),.PCURVE_S1.);-#6944 = LINE('',#6945,#6946);-#6945 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#6946 = VECTOR('',#6947,1.);-#6947 = DIRECTION('',(0.,-1.,0.));-#6948 = PCURVE('',#6719,#6949);-#6949 = DEFINITIONAL_REPRESENTATION('',(#6950),#6954);-#6950 = LINE('',#6951,#6952);-#6951 = CARTESIAN_POINT('',(0.5675,0.15));-#6952 = VECTOR('',#6953,1.);-#6953 = DIRECTION('',(0.,-1.));-#6954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6955 = PCURVE('',#6797,#6956);-#6956 = DEFINITIONAL_REPRESENTATION('',(#6957),#6961);-#6957 = LINE('',#6958,#6959);-#6958 = CARTESIAN_POINT('',(0.,0.15));-#6959 = VECTOR('',#6960,1.);-#6960 = DIRECTION('',(0.,-1.));-#6961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6962 = ORIENTED_EDGE('',*,*,#6963,.F.);-#6963 = EDGE_CURVE('',#6704,#6941,#6964,.T.);+#6885 = ORIENTED_EDGE('',*,*,#6792,.T.);+#6886 = ORIENTED_EDGE('',*,*,#6712,.F.);+#6887 = ORIENTED_EDGE('',*,*,#6888,.T.);+#6888 = EDGE_CURVE('',#6685,#6864,#6889,.T.);+#6889 = SURFACE_CURVE('',#6890,(#6894,#6901),.PCURVE_S1.);+#6890 = LINE('',#6891,#6892);+#6891 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));+#6892 = VECTOR('',#6893,1.);+#6893 = DIRECTION('',(0.,-1.,0.));+#6894 = PCURVE('',#6728,#6895);+#6895 = DEFINITIONAL_REPRESENTATION('',(#6896),#6900);+#6896 = LINE('',#6897,#6898);+#6897 = CARTESIAN_POINT('',(0.,0.15));+#6898 = VECTOR('',#6899,1.);+#6899 = DIRECTION('',(0.,-1.));+#6900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6901 = PCURVE('',#6700,#6902);+#6902 = DEFINITIONAL_REPRESENTATION('',(#6903),#6907);+#6903 = LINE('',#6904,#6905);+#6904 = CARTESIAN_POINT('',(0.7175,0.15));+#6905 = VECTOR('',#6906,1.);+#6906 = DIRECTION('',(0.,-1.));+#6907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6908 = ADVANCED_FACE('',(#6909),#6700,.F.);+#6909 = FACE_BOUND('',#6910,.F.);+#6910 = EDGE_LOOP('',(#6911,#6934,#6935,#6936));+#6911 = ORIENTED_EDGE('',*,*,#6912,.T.);+#6912 = EDGE_CURVE('',#6913,#6864,#6915,.T.);+#6913 = VERTEX_POINT('',#6914);+#6914 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#6915 = SURFACE_CURVE('',#6916,(#6920,#6927),.PCURVE_S1.);+#6916 = LINE('',#6917,#6918);+#6917 = CARTESIAN_POINT('',(-3.205,-3.075,0.));+#6918 = VECTOR('',#6919,1.);+#6919 = DIRECTION('',(1.,0.,0.));+#6920 = PCURVE('',#6700,#6921);+#6921 = DEFINITIONAL_REPRESENTATION('',(#6922),#6926);+#6922 = LINE('',#6923,#6924);+#6923 = CARTESIAN_POINT('',(0.,-0.15));+#6924 = VECTOR('',#6925,1.);+#6925 = DIRECTION('',(1.,0.));+#6926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6927 = PCURVE('',#6535,#6928);+#6928 = DEFINITIONAL_REPRESENTATION('',(#6929),#6933);+#6929 = LINE('',#6930,#6931);+#6930 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));+#6931 = VECTOR('',#6932,1.);+#6932 = DIRECTION('',(0.,1.));+#6933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6934 = ORIENTED_EDGE('',*,*,#6888,.F.);+#6935 = ORIENTED_EDGE('',*,*,#6684,.F.);+#6936 = ORIENTED_EDGE('',*,*,#6937,.T.);+#6937 = EDGE_CURVE('',#6657,#6913,#6938,.T.);+#6938 = SURFACE_CURVE('',#6939,(#6943,#6950),.PCURVE_S1.);+#6939 = LINE('',#6940,#6941);+#6940 = CARTESIAN_POINT('',(-3.205,-2.775,0.));+#6941 = VECTOR('',#6942,1.);+#6942 = DIRECTION('',(0.,-1.,0.));+#6943 = PCURVE('',#6700,#6944);+#6944 = DEFINITIONAL_REPRESENTATION('',(#6945),#6949);+#6945 = LINE('',#6946,#6947);+#6946 = CARTESIAN_POINT('',(0.,0.15));+#6947 = VECTOR('',#6948,1.);+#6948 = DIRECTION('',(0.,-1.));+#6949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6950 = PCURVE('',#6672,#6951);+#6951 = DEFINITIONAL_REPRESENTATION('',(#6952),#6956);+#6952 = LINE('',#6953,#6954);+#6953 = CARTESIAN_POINT('',(0.15,0.15));+#6954 = VECTOR('',#6955,1.);+#6955 = DIRECTION('',(0.,-1.));+#6956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6957 = ADVANCED_FACE('',(#6958),#6672,.F.);+#6958 = FACE_BOUND('',#6959,.F.);+#6959 = EDGE_LOOP('',(#6960,#6983,#6984,#6985));+#6960 = ORIENTED_EDGE('',*,*,#6961,.T.);+#6961 = EDGE_CURVE('',#6962,#6913,#6964,.T.);+#6962 = VERTEX_POINT('',#6963);+#6963 = CARTESIAN_POINT('',(-3.205,-3.075,0.15)); #6964 = SURFACE_CURVE('',#6965,(#6969,#6976),.PCURVE_S1.); #6965 = LINE('',#6966,#6967);-#6966 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#6966 = CARTESIAN_POINT('',(-3.205,-3.075,0.15)); #6967 = VECTOR('',#6968,1.);-#6968 = DIRECTION('',(-1.,0.,0.));-#6969 = PCURVE('',#6719,#6970);+#6968 = DIRECTION('',(0.,0.,-1.));+#6969 = PCURVE('',#6672,#6970); #6970 = DEFINITIONAL_REPRESENTATION('',(#6971),#6975); #6971 = LINE('',#6972,#6973);-#6972 = CARTESIAN_POINT('',(0.,0.15));+#6972 = CARTESIAN_POINT('',(0.,-0.15)); #6973 = VECTOR('',#6974,1.); #6974 = DIRECTION('',(1.,0.)); #6975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6976 = PCURVE('',#6589,#6977);+#6976 = PCURVE('',#6535,#6977); #6977 = DEFINITIONAL_REPRESENTATION('',(#6978),#6982); #6978 = LINE('',#6979,#6980);-#6979 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#6979 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755)); #6980 = VECTOR('',#6981,1.);-#6981 = DIRECTION('',(0.,-1.));+#6981 = DIRECTION('',(1.,0.)); #6982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6983 = ORIENTED_EDGE('',*,*,#6703,.T.);-#6984 = ADVANCED_FACE('',(#6985),#6589,.F.);-#6985 = FACE_BOUND('',#6986,.F.);-#6986 = EDGE_LOOP('',(#6987,#6988,#6989,#6990,#7013,#7036,#7057,#7058));-#6987 = ORIENTED_EDGE('',*,*,#6575,.T.);-#6988 = ORIENTED_EDGE('',*,*,#6731,.T.);-#6989 = ORIENTED_EDGE('',*,*,#6963,.T.);-#6990 = ORIENTED_EDGE('',*,*,#6991,.T.);-#6991 = EDGE_CURVE('',#6941,#6992,#6994,.T.);-#6992 = VERTEX_POINT('',#6993);-#6993 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#6994 = SURFACE_CURVE('',#6995,(#6999,#7006),.PCURVE_S1.);-#6995 = LINE('',#6996,#6997);-#6996 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));-#6997 = VECTOR('',#6998,1.);-#6998 = DIRECTION('',(0.,0.,-1.));-#6999 = PCURVE('',#6589,#7000);+#6983 = ORIENTED_EDGE('',*,*,#6937,.F.);+#6984 = ORIENTED_EDGE('',*,*,#6656,.F.);+#6985 = ORIENTED_EDGE('',*,*,#6986,.T.);+#6986 = EDGE_CURVE('',#6629,#6962,#6987,.T.);+#6987 = SURFACE_CURVE('',#6988,(#6992,#6999),.PCURVE_S1.);+#6988 = LINE('',#6989,#6990);+#6989 = CARTESIAN_POINT('',(-3.205,-2.775,0.15));+#6990 = VECTOR('',#6991,1.);+#6991 = DIRECTION('',(0.,-1.,0.));+#6992 = PCURVE('',#6672,#6993);+#6993 = DEFINITIONAL_REPRESENTATION('',(#6994),#6998);+#6994 = LINE('',#6995,#6996);+#6995 = CARTESIAN_POINT('',(0.,0.15));+#6996 = VECTOR('',#6997,1.);+#6997 = DIRECTION('',(0.,-1.));+#6998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6999 = PCURVE('',#6644,#7000); #7000 = DEFINITIONAL_REPRESENTATION('',(#7001),#7005); #7001 = LINE('',#7002,#7003);-#7002 = CARTESIAN_POINT('',(6.7942023204E-02,-0.570817725755));+#7002 = CARTESIAN_POINT('',(0.5675,0.15)); #7003 = VECTOR('',#7004,1.);-#7004 = DIRECTION('',(1.,0.));+#7004 = DIRECTION('',(0.,-1.)); #7005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7006 = PCURVE('',#6797,#7007);-#7007 = DEFINITIONAL_REPRESENTATION('',(#7008),#7012);-#7008 = LINE('',#7009,#7010);-#7009 = CARTESIAN_POINT('',(0.,0.15));-#7010 = VECTOR('',#7011,1.);-#7011 = DIRECTION('',(1.,0.));-#7012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7013 = ORIENTED_EDGE('',*,*,#7014,.T.);-#7014 = EDGE_CURVE('',#6992,#7015,#7017,.T.);-#7015 = VERTEX_POINT('',#7016);-#7016 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#7017 = SURFACE_CURVE('',#7018,(#7022,#7029),.PCURVE_S1.);-#7018 = LINE('',#7019,#7020);-#7019 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#7020 = VECTOR('',#7021,1.);-#7021 = DIRECTION('',(1.,0.,0.));-#7022 = PCURVE('',#6589,#7023);-#7023 = DEFINITIONAL_REPRESENTATION('',(#7024),#7028);-#7024 = LINE('',#7025,#7026);-#7025 = CARTESIAN_POINT('',(0.217942023204,-0.570817725755));-#7026 = VECTOR('',#7027,1.);-#7027 = DIRECTION('',(0.,1.));-#7028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7029 = PCURVE('',#6825,#7030);-#7030 = DEFINITIONAL_REPRESENTATION('',(#7031),#7035);-#7031 = LINE('',#7032,#7033);-#7032 = CARTESIAN_POINT('',(0.,0.15));-#7033 = VECTOR('',#7034,1.);-#7034 = DIRECTION('',(1.,0.));-#7035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7036 = ORIENTED_EDGE('',*,*,#7037,.T.);-#7037 = EDGE_CURVE('',#7015,#6891,#7038,.T.);-#7038 = SURFACE_CURVE('',#7039,(#7043,#7050),.PCURVE_S1.);-#7039 = LINE('',#7040,#7041);-#7040 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#7041 = VECTOR('',#7042,1.);-#7042 = DIRECTION('',(0.542664170358,0.,0.839949759337));-#7043 = PCURVE('',#6589,#7044);-#7044 = DEFINITIONAL_REPRESENTATION('',(#7045),#7049);-#7045 = LINE('',#7046,#7047);-#7046 = CARTESIAN_POINT('',(0.217942023204,0.146682274245));-#7047 = VECTOR('',#7048,1.);-#7048 = DIRECTION('',(-0.839949759337,0.542664170358));-#7049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7050 = PCURVE('',#6853,#7051);-#7051 = DEFINITIONAL_REPRESENTATION('',(#7052),#7056);-#7052 = LINE('',#7053,#7054);-#7053 = CARTESIAN_POINT('',(0.,0.15));-#7054 = VECTOR('',#7055,1.);-#7055 = DIRECTION('',(1.,0.));-#7056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7057 = ORIENTED_EDGE('',*,*,#6915,.T.);-#7058 = ORIENTED_EDGE('',*,*,#6656,.T.);-#7059 = ADVANCED_FACE('',(#7060),#6797,.F.);-#7060 = FACE_BOUND('',#7061,.F.);-#7061 = EDGE_LOOP('',(#7062,#7063,#7084,#7085));-#7062 = ORIENTED_EDGE('',*,*,#6781,.T.);-#7063 = ORIENTED_EDGE('',*,*,#7064,.F.);-#7064 = EDGE_CURVE('',#6992,#6782,#7065,.T.);-#7065 = SURFACE_CURVE('',#7066,(#7070,#7077),.PCURVE_S1.);-#7066 = LINE('',#7067,#7068);-#7067 = CARTESIAN_POINT('',(-3.205,-2.775,0.));-#7068 = VECTOR('',#7069,1.);-#7069 = DIRECTION('',(0.,-1.,0.));-#7070 = PCURVE('',#6797,#7071);-#7071 = DEFINITIONAL_REPRESENTATION('',(#7072),#7076);-#7072 = LINE('',#7073,#7074);-#7073 = CARTESIAN_POINT('',(0.15,0.15));-#7074 = VECTOR('',#7075,1.);-#7075 = DIRECTION('',(0.,-1.));-#7076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7077 = PCURVE('',#6825,#7078);-#7078 = DEFINITIONAL_REPRESENTATION('',(#7079),#7083);-#7079 = LINE('',#7080,#7081);-#7080 = CARTESIAN_POINT('',(0.,0.15));-#7081 = VECTOR('',#7082,1.);-#7082 = DIRECTION('',(0.,-1.));-#7083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7084 = ORIENTED_EDGE('',*,*,#6991,.F.);-#7085 = ORIENTED_EDGE('',*,*,#6940,.T.);-#7086 = ADVANCED_FACE('',(#7087),#6825,.F.);-#7087 = FACE_BOUND('',#7088,.F.);-#7088 = EDGE_LOOP('',(#7089,#7090,#7111,#7112));-#7089 = ORIENTED_EDGE('',*,*,#6809,.T.);-#7090 = ORIENTED_EDGE('',*,*,#7091,.F.);-#7091 = EDGE_CURVE('',#7015,#6810,#7092,.T.);-#7092 = SURFACE_CURVE('',#7093,(#7097,#7104),.PCURVE_S1.);-#7093 = LINE('',#7094,#7095);-#7094 = CARTESIAN_POINT('',(-2.4875,-2.775,0.));-#7095 = VECTOR('',#7096,1.);-#7096 = DIRECTION('',(0.,-1.,0.));-#7097 = PCURVE('',#6825,#7098);-#7098 = DEFINITIONAL_REPRESENTATION('',(#7099),#7103);-#7099 = LINE('',#7100,#7101);-#7100 = CARTESIAN_POINT('',(0.7175,0.15));-#7101 = VECTOR('',#7102,1.);-#7102 = DIRECTION('',(0.,-1.));-#7103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7104 = PCURVE('',#6853,#7105);-#7105 = DEFINITIONAL_REPRESENTATION('',(#7106),#7110);-#7106 = LINE('',#7107,#7108);-#7107 = CARTESIAN_POINT('',(0.,0.15));-#7108 = VECTOR('',#7109,1.);-#7109 = DIRECTION('',(0.,-1.));-#7110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7111 = ORIENTED_EDGE('',*,*,#7014,.F.);-#7112 = ORIENTED_EDGE('',*,*,#7064,.T.);-#7113 = ADVANCED_FACE('',(#7114),#6853,.F.);+#7006 = ADVANCED_FACE('',(#7007),#6644,.F.);+#7007 = FACE_BOUND('',#7008,.F.);+#7008 = EDGE_LOOP('',(#7009,#7032,#7033,#7034));+#7009 = ORIENTED_EDGE('',*,*,#7010,.T.);+#7010 = EDGE_CURVE('',#7011,#6962,#7013,.T.);+#7011 = VERTEX_POINT('',#7012);+#7012 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#7013 = SURFACE_CURVE('',#7014,(#7018,#7025),.PCURVE_S1.);+#7014 = LINE('',#7015,#7016);+#7015 = CARTESIAN_POINT('',(-2.6375,-3.075,0.15));+#7016 = VECTOR('',#7017,1.);+#7017 = DIRECTION('',(-1.,0.,0.));+#7018 = PCURVE('',#6644,#7019);+#7019 = DEFINITIONAL_REPRESENTATION('',(#7020),#7024);+#7020 = LINE('',#7021,#7022);+#7021 = CARTESIAN_POINT('',(0.,-0.15));+#7022 = VECTOR('',#7023,1.);+#7023 = DIRECTION('',(1.,0.));+#7024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7025 = PCURVE('',#6535,#7026);+#7026 = DEFINITIONAL_REPRESENTATION('',(#7027),#7031);+#7027 = LINE('',#7028,#7029);+#7028 = CARTESIAN_POINT('',(6.7942023204E-02,-3.317725754662E-03));+#7029 = VECTOR('',#7030,1.);+#7030 = DIRECTION('',(0.,-1.));+#7031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7032 = ORIENTED_EDGE('',*,*,#6986,.F.);+#7033 = ORIENTED_EDGE('',*,*,#6628,.F.);+#7034 = ORIENTED_EDGE('',*,*,#7035,.T.);+#7035 = EDGE_CURVE('',#6606,#7011,#7036,.T.);+#7036 = SURFACE_CURVE('',#7037,(#7041,#7048),.PCURVE_S1.);+#7037 = LINE('',#7038,#7039);+#7038 = CARTESIAN_POINT('',(-2.6375,-2.775,0.15));+#7039 = VECTOR('',#7040,1.);+#7040 = DIRECTION('',(0.,-1.,0.));+#7041 = PCURVE('',#6644,#7042);+#7042 = DEFINITIONAL_REPRESENTATION('',(#7043),#7047);+#7043 = LINE('',#7044,#7045);+#7044 = CARTESIAN_POINT('',(0.,0.15));+#7045 = VECTOR('',#7046,1.);+#7046 = DIRECTION('',(0.,-1.));+#7047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7048 = PCURVE('',#6563,#7049);+#7049 = DEFINITIONAL_REPRESENTATION('',(#7050),#7054);+#7050 = LINE('',#7051,#7052);+#7051 = CARTESIAN_POINT('',(0.529793591883,0.15));+#7052 = VECTOR('',#7053,1.);+#7053 = DIRECTION('',(-0.,-1.));+#7054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7055 = ADVANCED_FACE('',(#7056),#6563,.F.);+#7056 = FACE_BOUND('',#7057,.F.);+#7057 = EDGE_LOOP('',(#7058,#7079,#7080,#7081));+#7058 = ORIENTED_EDGE('',*,*,#7059,.T.);+#7059 = EDGE_CURVE('',#6520,#7011,#7060,.T.);+#7060 = SURFACE_CURVE('',#7061,(#7065,#7072),.PCURVE_S1.);+#7061 = LINE('',#7062,#7063);+#7062 = CARTESIAN_POINT('',(-2.35,-3.075,0.595));+#7063 = VECTOR('',#7064,1.);+#7064 = DIRECTION('',(-0.542664170358,0.,-0.839949759337));+#7065 = PCURVE('',#6563,#7066);+#7066 = DEFINITIONAL_REPRESENTATION('',(#7067),#7071);+#7067 = LINE('',#7068,#7069);+#7068 = CARTESIAN_POINT('',(-0.,-0.15));+#7069 = VECTOR('',#7070,1.);+#7070 = DIRECTION('',(1.,0.));+#7071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7072 = PCURVE('',#6535,#7073);+#7073 = DEFINITIONAL_REPRESENTATION('',(#7074),#7078);+#7074 = LINE('',#7075,#7076);+#7075 = CARTESIAN_POINT('',(-0.377057976796,0.284182274245));+#7076 = VECTOR('',#7077,1.);+#7077 = DIRECTION('',(0.839949759337,-0.542664170358));+#7078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7079 = ORIENTED_EDGE('',*,*,#7035,.F.);+#7080 = ORIENTED_EDGE('',*,*,#6605,.F.);+#7081 = ORIENTED_EDGE('',*,*,#6547,.T.);+#7082 = ADVANCED_FACE('',(#7083),#6535,.T.);+#7083 = FACE_BOUND('',#7084,.T.);+#7084 = EDGE_LOOP('',(#7085,#7086,#7087,#7088,#7089,#7090,#7091,#7092));+#7085 = ORIENTED_EDGE('',*,*,#6519,.T.);+#7086 = ORIENTED_EDGE('',*,*,#7059,.T.);+#7087 = ORIENTED_EDGE('',*,*,#7010,.T.);+#7088 = ORIENTED_EDGE('',*,*,#6961,.T.);+#7089 = ORIENTED_EDGE('',*,*,#6912,.T.);+#7090 = ORIENTED_EDGE('',*,*,#6863,.T.);+#7091 = ORIENTED_EDGE('',*,*,#6815,.T.);+#7092 = ORIENTED_EDGE('',*,*,#7093,.T.);+#7093 = EDGE_CURVE('',#6816,#6485,#7094,.T.);+#7094 = SURFACE_CURVE('',#7095,(#7099,#7106),.PCURVE_S1.);+#7095 = LINE('',#7096,#7097);+#7096 = CARTESIAN_POINT('',(-2.15,-3.075,0.445));+#7097 = VECTOR('',#7098,1.);+#7098 = DIRECTION('',(0.,0.,1.));+#7099 = PCURVE('',#6535,#7100);+#7100 = DEFINITIONAL_REPRESENTATION('',(#7101),#7105);+#7101 = LINE('',#7102,#7103);+#7102 = CARTESIAN_POINT('',(-0.227057976796,0.484182274245));+#7103 = VECTOR('',#7104,1.);+#7104 = DIRECTION('',(-1.,0.));+#7105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7106 = PCURVE('',#6507,#7107);+#7107 = DEFINITIONAL_REPRESENTATION('',(#7108),#7112);+#7108 = LINE('',#7109,#7110);+#7109 = CARTESIAN_POINT('',(0.,-0.15));+#7110 = VECTOR('',#7111,1.);+#7111 = DIRECTION('',(1.,0.));+#7112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7113 = ADVANCED_FACE('',(#7114),#6507,.F.); #7114 = FACE_BOUND('',#7115,.F.); #7115 = EDGE_LOOP('',(#7116,#7117,#7118,#7119));-#7116 = ORIENTED_EDGE('',*,*,#6837,.T.);-#7117 = ORIENTED_EDGE('',*,*,#6890,.T.);-#7118 = ORIENTED_EDGE('',*,*,#7037,.F.);-#7119 = ORIENTED_EDGE('',*,*,#7091,.T.);+#7116 = ORIENTED_EDGE('',*,*,#6838,.F.);+#7117 = ORIENTED_EDGE('',*,*,#7093,.T.);+#7118 = ORIENTED_EDGE('',*,*,#6484,.T.);+#7119 = ORIENTED_EDGE('',*,*,#6768,.F.); #7120 = MANIFOLD_SOLID_BREP('',#7121);-#7121 = CLOSED_SHELL('',(#7122,#7242,#7318,#7394,#7528,#7577,#7626,#7701- ,#7728,#7755));+#7121 = CLOSED_SHELL('',(#7122,#7242,#7318,#7394,#7470,#7546,#7622,#7693+ ,#7724,#7751)); #7122 = ADVANCED_FACE('',(#7123),#7137,.T.); #7123 = FACE_BOUND('',#7124,.T.); #7124 = EDGE_LOOP('',(#7125,#7160,#7188,#7216));@@ -8439,521 +8439,521 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #7317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7318 = ADVANCED_FACE('',(#7319),#7177,.T.);+#7318 = ADVANCED_FACE('',(#7319),#7307,.T.); #7319 = FACE_BOUND('',#7320,.T.);-#7320 = EDGE_LOOP('',(#7321,#7322,#7345,#7373));-#7321 = ORIENTED_EDGE('',*,*,#7161,.F.);-#7322 = ORIENTED_EDGE('',*,*,#7323,.T.);-#7323 = EDGE_CURVE('',#7129,#7324,#7326,.T.);-#7324 = VERTEX_POINT('',#7325);-#7325 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));-#7326 = SURFACE_CURVE('',#7327,(#7331,#7338),.PCURVE_S1.);-#7327 = LINE('',#7328,#7329);-#7328 = CARTESIAN_POINT('',(2.35,-3.075,0.595));-#7329 = VECTOR('',#7330,1.);-#7330 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#7331 = PCURVE('',#7177,#7332);-#7332 = DEFINITIONAL_REPRESENTATION('',(#7333),#7337);-#7333 = LINE('',#7334,#7335);-#7334 = CARTESIAN_POINT('',(0.,-0.15));-#7335 = VECTOR('',#7336,1.);-#7336 = DIRECTION('',(1.,0.));-#7337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7338 = PCURVE('',#7149,#7339);-#7339 = DEFINITIONAL_REPRESENTATION('',(#7340),#7344);-#7340 = LINE('',#7341,#7342);-#7341 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));-#7342 = VECTOR('',#7343,1.);-#7343 = DIRECTION('',(-0.839949759337,0.542664170358));-#7344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7345 = ORIENTED_EDGE('',*,*,#7346,.T.);-#7346 = EDGE_CURVE('',#7324,#7347,#7349,.T.);+#7320 = EDGE_LOOP('',(#7321,#7344,#7345,#7368));+#7321 = ORIENTED_EDGE('',*,*,#7322,.T.);+#7322 = EDGE_CURVE('',#7323,#7247,#7325,.T.);+#7323 = VERTEX_POINT('',#7324);+#7324 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#7325 = SURFACE_CURVE('',#7326,(#7330,#7337),.PCURVE_S1.);+#7326 = LINE('',#7327,#7328);+#7327 = CARTESIAN_POINT('',(2.2,-3.075,0.445));+#7328 = VECTOR('',#7329,1.);+#7329 = DIRECTION('',(-1.,0.,0.));+#7330 = PCURVE('',#7307,#7331);+#7331 = DEFINITIONAL_REPRESENTATION('',(#7332),#7336);+#7332 = LINE('',#7333,#7334);+#7333 = CARTESIAN_POINT('',(0.,-0.15));+#7334 = VECTOR('',#7335,1.);+#7335 = DIRECTION('',(1.,0.));+#7336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7337 = PCURVE('',#7149,#7338);+#7338 = DEFINITIONAL_REPRESENTATION('',(#7339),#7343);+#7339 = LINE('',#7340,#7341);+#7340 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7341 = VECTOR('',#7342,1.);+#7342 = DIRECTION('',(0.,-1.));+#7343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7344 = ORIENTED_EDGE('',*,*,#7293,.F.);+#7345 = ORIENTED_EDGE('',*,*,#7346,.F.);+#7346 = EDGE_CURVE('',#7347,#7271,#7349,.T.); #7347 = VERTEX_POINT('',#7348);-#7348 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#7348 = CARTESIAN_POINT('',(2.2,-2.775,0.445)); #7349 = SURFACE_CURVE('',#7350,(#7354,#7361),.PCURVE_S1.); #7350 = LINE('',#7351,#7352);-#7351 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7351 = CARTESIAN_POINT('',(2.2,-2.775,0.445)); #7352 = VECTOR('',#7353,1.);-#7353 = DIRECTION('',(0.,1.,0.));-#7354 = PCURVE('',#7177,#7355);+#7353 = DIRECTION('',(-1.,0.,0.));+#7354 = PCURVE('',#7307,#7355); #7355 = DEFINITIONAL_REPRESENTATION('',(#7356),#7360); #7356 = LINE('',#7357,#7358);-#7357 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#7357 = CARTESIAN_POINT('',(0.,0.15)); #7358 = VECTOR('',#7359,1.);-#7359 = DIRECTION('',(0.,1.));+#7359 = DIRECTION('',(1.,0.)); #7360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7361 = PCURVE('',#7362,#7367);-#7362 = PLANE('',#7363);-#7363 = AXIS2_PLACEMENT_3D('',#7364,#7365,#7366);-#7364 = CARTESIAN_POINT('',(2.6375,-2.925,0.15));-#7365 = DIRECTION('',(-0.,0.,1.));-#7366 = DIRECTION('',(1.,0.,0.));-#7367 = DEFINITIONAL_REPRESENTATION('',(#7368),#7372);-#7368 = LINE('',#7369,#7370);-#7369 = CARTESIAN_POINT('',(0.,-0.15));-#7370 = VECTOR('',#7371,1.);-#7371 = DIRECTION('',(0.,1.));-#7372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7373 = ORIENTED_EDGE('',*,*,#7374,.F.);-#7374 = EDGE_CURVE('',#7162,#7347,#7375,.T.);-#7375 = SURFACE_CURVE('',#7376,(#7380,#7387),.PCURVE_S1.);-#7376 = LINE('',#7377,#7378);-#7377 = CARTESIAN_POINT('',(2.35,-2.775,0.595));-#7378 = VECTOR('',#7379,1.);-#7379 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#7380 = PCURVE('',#7177,#7381);-#7381 = DEFINITIONAL_REPRESENTATION('',(#7382),#7386);-#7382 = LINE('',#7383,#7384);-#7383 = CARTESIAN_POINT('',(0.,0.15));-#7384 = VECTOR('',#7385,1.);-#7385 = DIRECTION('',(1.,0.));-#7386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7387 = PCURVE('',#7205,#7388);+#7361 = PCURVE('',#7205,#7362);+#7362 = DEFINITIONAL_REPRESENTATION('',(#7363),#7367);+#7363 = LINE('',#7364,#7365);+#7364 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7365 = VECTOR('',#7366,1.);+#7366 = DIRECTION('',(0.,-1.));+#7367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7368 = ORIENTED_EDGE('',*,*,#7369,.T.);+#7369 = EDGE_CURVE('',#7347,#7323,#7370,.T.);+#7370 = SURFACE_CURVE('',#7371,(#7375,#7382),.PCURVE_S1.);+#7371 = LINE('',#7372,#7373);+#7372 = CARTESIAN_POINT('',(2.2,-2.775,0.445));+#7373 = VECTOR('',#7374,1.);+#7374 = DIRECTION('',(0.,-1.,0.));+#7375 = PCURVE('',#7307,#7376);+#7376 = DEFINITIONAL_REPRESENTATION('',(#7377),#7381);+#7377 = LINE('',#7378,#7379);+#7378 = CARTESIAN_POINT('',(0.,0.15));+#7379 = VECTOR('',#7380,1.);+#7380 = DIRECTION('',(0.,-1.));+#7381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7382 = PCURVE('',#7383,#7388);+#7383 = PLANE('',#7384);+#7384 = AXIS2_PLACEMENT_3D('',#7385,#7386,#7387);+#7385 = CARTESIAN_POINT('',(2.4875,-2.925,0.));+#7386 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#7387 = DIRECTION('',(-0.542664170358,0.,0.839949759337)); #7388 = DEFINITIONAL_REPRESENTATION('',(#7389),#7393); #7389 = LINE('',#7390,#7391);-#7390 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#7390 = CARTESIAN_POINT('',(0.529793591883,0.15)); #7391 = VECTOR('',#7392,1.);-#7392 = DIRECTION('',(-0.839949759337,0.542664170358));+#7392 = DIRECTION('',(0.,-1.)); #7393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7394 = ADVANCED_FACE('',(#7395),#7149,.F.);-#7395 = FACE_BOUND('',#7396,.F.);-#7396 = EDGE_LOOP('',(#7397,#7398,#7399,#7422,#7450,#7478,#7506,#7527));-#7397 = ORIENTED_EDGE('',*,*,#7126,.T.);-#7398 = ORIENTED_EDGE('',*,*,#7323,.T.);-#7399 = ORIENTED_EDGE('',*,*,#7400,.T.);-#7400 = EDGE_CURVE('',#7324,#7401,#7403,.T.);+#7394 = ADVANCED_FACE('',(#7395),#7383,.T.);+#7395 = FACE_BOUND('',#7396,.T.);+#7396 = EDGE_LOOP('',(#7397,#7427,#7448,#7449));+#7397 = ORIENTED_EDGE('',*,*,#7398,.F.);+#7398 = EDGE_CURVE('',#7399,#7401,#7403,.T.);+#7399 = VERTEX_POINT('',#7400);+#7400 = CARTESIAN_POINT('',(2.4875,-3.075,0.)); #7401 = VERTEX_POINT('',#7402);-#7402 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7402 = CARTESIAN_POINT('',(2.4875,-2.775,0.)); #7403 = SURFACE_CURVE('',#7404,(#7408,#7415),.PCURVE_S1.); #7404 = LINE('',#7405,#7406);-#7405 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7405 = CARTESIAN_POINT('',(2.4875,-3.075,0.)); #7406 = VECTOR('',#7407,1.);-#7407 = DIRECTION('',(1.,0.,0.));-#7408 = PCURVE('',#7149,#7409);+#7407 = DIRECTION('',(0.,1.,0.));+#7408 = PCURVE('',#7383,#7409); #7409 = DEFINITIONAL_REPRESENTATION('',(#7410),#7414); #7410 = LINE('',#7411,#7412);-#7411 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#7411 = CARTESIAN_POINT('',(0.,-0.15)); #7412 = VECTOR('',#7413,1.); #7413 = DIRECTION('',(0.,1.)); #7414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7415 = PCURVE('',#7362,#7416);-#7416 = DEFINITIONAL_REPRESENTATION('',(#7417),#7421);-#7417 = LINE('',#7418,#7419);-#7418 = CARTESIAN_POINT('',(0.,-0.15));-#7419 = VECTOR('',#7420,1.);-#7420 = DIRECTION('',(1.,0.));-#7421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7422 = ORIENTED_EDGE('',*,*,#7423,.T.);-#7423 = EDGE_CURVE('',#7401,#7424,#7426,.T.);-#7424 = VERTEX_POINT('',#7425);-#7425 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#7426 = SURFACE_CURVE('',#7427,(#7431,#7438),.PCURVE_S1.);-#7427 = LINE('',#7428,#7429);-#7428 = CARTESIAN_POINT('',(3.205,-3.075,0.15));-#7429 = VECTOR('',#7430,1.);-#7430 = DIRECTION('',(0.,0.,-1.));-#7431 = PCURVE('',#7149,#7432);-#7432 = DEFINITIONAL_REPRESENTATION('',(#7433),#7437);-#7433 = LINE('',#7434,#7435);-#7434 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#7435 = VECTOR('',#7436,1.);-#7436 = DIRECTION('',(-1.,0.));-#7437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7438 = PCURVE('',#7439,#7444);-#7439 = PLANE('',#7440);-#7440 = AXIS2_PLACEMENT_3D('',#7441,#7442,#7443);-#7441 = CARTESIAN_POINT('',(3.205,-2.925,0.15));-#7442 = DIRECTION('',(1.,0.,0.));-#7443 = DIRECTION('',(0.,0.,-1.));-#7444 = DEFINITIONAL_REPRESENTATION('',(#7445),#7449);-#7445 = LINE('',#7446,#7447);-#7446 = CARTESIAN_POINT('',(0.,-0.15));-#7447 = VECTOR('',#7448,1.);-#7448 = DIRECTION('',(1.,0.));-#7449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7450 = ORIENTED_EDGE('',*,*,#7451,.T.);-#7451 = EDGE_CURVE('',#7424,#7452,#7454,.T.);-#7452 = VERTEX_POINT('',#7453);-#7453 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#7454 = SURFACE_CURVE('',#7455,(#7459,#7466),.PCURVE_S1.);-#7455 = LINE('',#7456,#7457);-#7456 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#7457 = VECTOR('',#7458,1.);-#7458 = DIRECTION('',(-1.,0.,0.));-#7459 = PCURVE('',#7149,#7460);-#7460 = DEFINITIONAL_REPRESENTATION('',(#7461),#7465);-#7461 = LINE('',#7462,#7463);-#7462 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));-#7463 = VECTOR('',#7464,1.);-#7464 = DIRECTION('',(0.,-1.));-#7465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7466 = PCURVE('',#7467,#7472);-#7467 = PLANE('',#7468);-#7468 = AXIS2_PLACEMENT_3D('',#7469,#7470,#7471);-#7469 = CARTESIAN_POINT('',(3.205,-2.925,0.));-#7470 = DIRECTION('',(-0.,-0.,-1.));-#7471 = DIRECTION('',(-1.,0.,0.));-#7472 = DEFINITIONAL_REPRESENTATION('',(#7473),#7477);-#7473 = LINE('',#7474,#7475);-#7474 = CARTESIAN_POINT('',(0.,-0.15));-#7475 = VECTOR('',#7476,1.);-#7476 = DIRECTION('',(1.,0.));-#7477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7478 = ORIENTED_EDGE('',*,*,#7479,.T.);-#7479 = EDGE_CURVE('',#7452,#7480,#7482,.T.);-#7480 = VERTEX_POINT('',#7481);-#7481 = CARTESIAN_POINT('',(2.2,-3.075,0.445));-#7482 = SURFACE_CURVE('',#7483,(#7487,#7494),.PCURVE_S1.);-#7483 = LINE('',#7484,#7485);-#7484 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#7485 = VECTOR('',#7486,1.);-#7486 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#7487 = PCURVE('',#7149,#7488);-#7488 = DEFINITIONAL_REPRESENTATION('',(#7489),#7493);-#7489 = LINE('',#7490,#7491);-#7490 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#7491 = VECTOR('',#7492,1.);-#7492 = DIRECTION('',(0.839949759337,-0.542664170358));-#7493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7494 = PCURVE('',#7495,#7500);-#7495 = PLANE('',#7496);-#7496 = AXIS2_PLACEMENT_3D('',#7497,#7498,#7499);-#7497 = CARTESIAN_POINT('',(2.4875,-2.925,0.));-#7498 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#7499 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#7500 = DEFINITIONAL_REPRESENTATION('',(#7501),#7505);-#7501 = LINE('',#7502,#7503);-#7502 = CARTESIAN_POINT('',(0.,-0.15));-#7503 = VECTOR('',#7504,1.);-#7504 = DIRECTION('',(1.,0.));-#7505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7506 = ORIENTED_EDGE('',*,*,#7507,.T.);-#7507 = EDGE_CURVE('',#7480,#7247,#7508,.T.);-#7508 = SURFACE_CURVE('',#7509,(#7513,#7520),.PCURVE_S1.);-#7509 = LINE('',#7510,#7511);-#7510 = CARTESIAN_POINT('',(2.2,-3.075,0.445));-#7511 = VECTOR('',#7512,1.);-#7512 = DIRECTION('',(-1.,0.,0.));-#7513 = PCURVE('',#7149,#7514);-#7514 = DEFINITIONAL_REPRESENTATION('',(#7515),#7519);-#7515 = LINE('',#7516,#7517);-#7516 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#7517 = VECTOR('',#7518,1.);-#7518 = DIRECTION('',(0.,-1.));-#7519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7520 = PCURVE('',#7307,#7521);-#7521 = DEFINITIONAL_REPRESENTATION('',(#7522),#7526);-#7522 = LINE('',#7523,#7524);-#7523 = CARTESIAN_POINT('',(0.,-0.15));-#7524 = VECTOR('',#7525,1.);-#7525 = DIRECTION('',(1.,0.));-#7526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7527 = ORIENTED_EDGE('',*,*,#7246,.T.);-#7528 = ADVANCED_FACE('',(#7529),#7307,.T.);-#7529 = FACE_BOUND('',#7530,.T.);-#7530 = EDGE_LOOP('',(#7531,#7532,#7533,#7556));-#7531 = ORIENTED_EDGE('',*,*,#7507,.T.);-#7532 = ORIENTED_EDGE('',*,*,#7293,.F.);-#7533 = ORIENTED_EDGE('',*,*,#7534,.F.);-#7534 = EDGE_CURVE('',#7535,#7271,#7537,.T.);-#7535 = VERTEX_POINT('',#7536);-#7536 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#7537 = SURFACE_CURVE('',#7538,(#7542,#7549),.PCURVE_S1.);-#7538 = LINE('',#7539,#7540);-#7539 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#7540 = VECTOR('',#7541,1.);-#7541 = DIRECTION('',(-1.,0.,0.));-#7542 = PCURVE('',#7307,#7543);-#7543 = DEFINITIONAL_REPRESENTATION('',(#7544),#7548);-#7544 = LINE('',#7545,#7546);-#7545 = CARTESIAN_POINT('',(0.,0.15));-#7546 = VECTOR('',#7547,1.);-#7547 = DIRECTION('',(1.,0.));-#7548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7549 = PCURVE('',#7205,#7550);-#7550 = DEFINITIONAL_REPRESENTATION('',(#7551),#7555);-#7551 = LINE('',#7552,#7553);-#7552 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#7553 = VECTOR('',#7554,1.);-#7554 = DIRECTION('',(0.,-1.));-#7555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7556 = ORIENTED_EDGE('',*,*,#7557,.T.);-#7557 = EDGE_CURVE('',#7535,#7480,#7558,.T.);-#7558 = SURFACE_CURVE('',#7559,(#7563,#7570),.PCURVE_S1.);-#7559 = LINE('',#7560,#7561);-#7560 = CARTESIAN_POINT('',(2.2,-2.775,0.445));-#7561 = VECTOR('',#7562,1.);-#7562 = DIRECTION('',(0.,-1.,0.));-#7563 = PCURVE('',#7307,#7564);-#7564 = DEFINITIONAL_REPRESENTATION('',(#7565),#7569);-#7565 = LINE('',#7566,#7567);-#7566 = CARTESIAN_POINT('',(0.,0.15));-#7567 = VECTOR('',#7568,1.);-#7568 = DIRECTION('',(0.,-1.));-#7569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7570 = PCURVE('',#7495,#7571);-#7571 = DEFINITIONAL_REPRESENTATION('',(#7572),#7576);-#7572 = LINE('',#7573,#7574);-#7573 = CARTESIAN_POINT('',(0.529793591883,0.15));-#7574 = VECTOR('',#7575,1.);-#7575 = DIRECTION('',(0.,-1.));-#7576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7577 = ADVANCED_FACE('',(#7578),#7362,.T.);-#7578 = FACE_BOUND('',#7579,.T.);-#7579 = EDGE_LOOP('',(#7580,#7581,#7582,#7605));-#7580 = ORIENTED_EDGE('',*,*,#7346,.F.);-#7581 = ORIENTED_EDGE('',*,*,#7400,.T.);-#7582 = ORIENTED_EDGE('',*,*,#7583,.T.);-#7583 = EDGE_CURVE('',#7401,#7584,#7586,.T.);-#7584 = VERTEX_POINT('',#7585);-#7585 = CARTESIAN_POINT('',(3.205,-2.775,0.15));-#7586 = SURFACE_CURVE('',#7587,(#7591,#7598),.PCURVE_S1.);-#7587 = LINE('',#7588,#7589);-#7588 = CARTESIAN_POINT('',(3.205,-3.075,0.15));-#7589 = VECTOR('',#7590,1.);-#7590 = DIRECTION('',(0.,1.,0.));-#7591 = PCURVE('',#7362,#7592);-#7592 = DEFINITIONAL_REPRESENTATION('',(#7593),#7597);-#7593 = LINE('',#7594,#7595);-#7594 = CARTESIAN_POINT('',(0.5675,-0.15));-#7595 = VECTOR('',#7596,1.);-#7596 = DIRECTION('',(0.,1.));-#7597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7598 = PCURVE('',#7439,#7599);-#7599 = DEFINITIONAL_REPRESENTATION('',(#7600),#7604);-#7600 = LINE('',#7601,#7602);-#7601 = CARTESIAN_POINT('',(0.,-0.15));-#7602 = VECTOR('',#7603,1.);-#7603 = DIRECTION('',(0.,1.));-#7604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7605 = ORIENTED_EDGE('',*,*,#7606,.F.);-#7606 = EDGE_CURVE('',#7347,#7584,#7607,.T.);-#7607 = SURFACE_CURVE('',#7608,(#7612,#7619),.PCURVE_S1.);-#7608 = LINE('',#7609,#7610);-#7609 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));-#7610 = VECTOR('',#7611,1.);-#7611 = DIRECTION('',(1.,0.,0.));-#7612 = PCURVE('',#7362,#7613);-#7613 = DEFINITIONAL_REPRESENTATION('',(#7614),#7618);-#7614 = LINE('',#7615,#7616);-#7615 = CARTESIAN_POINT('',(0.,0.15));-#7616 = VECTOR('',#7617,1.);-#7617 = DIRECTION('',(1.,0.));-#7618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7619 = PCURVE('',#7205,#7620);-#7620 = DEFINITIONAL_REPRESENTATION('',(#7621),#7625);-#7621 = LINE('',#7622,#7623);-#7622 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));-#7623 = VECTOR('',#7624,1.);-#7624 = DIRECTION('',(0.,1.));-#7625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7626 = ADVANCED_FACE('',(#7627),#7205,.T.);-#7627 = FACE_BOUND('',#7628,.T.);-#7628 = EDGE_LOOP('',(#7629,#7630,#7631,#7632,#7655,#7678,#7699,#7700));-#7629 = ORIENTED_EDGE('',*,*,#7189,.T.);-#7630 = ORIENTED_EDGE('',*,*,#7374,.T.);-#7631 = ORIENTED_EDGE('',*,*,#7606,.T.);-#7632 = ORIENTED_EDGE('',*,*,#7633,.T.);-#7633 = EDGE_CURVE('',#7584,#7634,#7636,.T.);-#7634 = VERTEX_POINT('',#7635);-#7635 = CARTESIAN_POINT('',(3.205,-2.775,0.));-#7636 = SURFACE_CURVE('',#7637,(#7641,#7648),.PCURVE_S1.);-#7637 = LINE('',#7638,#7639);-#7638 = CARTESIAN_POINT('',(3.205,-2.775,0.15));-#7639 = VECTOR('',#7640,1.);-#7640 = DIRECTION('',(0.,0.,-1.));-#7641 = PCURVE('',#7205,#7642);-#7642 = DEFINITIONAL_REPRESENTATION('',(#7643),#7647);-#7643 = LINE('',#7644,#7645);-#7644 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#7645 = VECTOR('',#7646,1.);-#7646 = DIRECTION('',(-1.,0.));-#7647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7648 = PCURVE('',#7439,#7649);-#7649 = DEFINITIONAL_REPRESENTATION('',(#7650),#7654);-#7650 = LINE('',#7651,#7652);-#7651 = CARTESIAN_POINT('',(0.,0.15));-#7652 = VECTOR('',#7653,1.);-#7653 = DIRECTION('',(1.,0.));-#7654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7655 = ORIENTED_EDGE('',*,*,#7656,.T.);-#7656 = EDGE_CURVE('',#7634,#7657,#7659,.T.);-#7657 = VERTEX_POINT('',#7658);-#7658 = CARTESIAN_POINT('',(2.4875,-2.775,0.));-#7659 = SURFACE_CURVE('',#7660,(#7664,#7671),.PCURVE_S1.);-#7660 = LINE('',#7661,#7662);-#7661 = CARTESIAN_POINT('',(3.205,-2.775,0.));-#7662 = VECTOR('',#7663,1.);-#7663 = DIRECTION('',(-1.,0.,0.));-#7664 = PCURVE('',#7205,#7665);+#7415 = PCURVE('',#7416,#7421);+#7416 = PLANE('',#7417);+#7417 = AXIS2_PLACEMENT_3D('',#7418,#7419,#7420);+#7418 = CARTESIAN_POINT('',(3.205,-2.925,0.));+#7419 = DIRECTION('',(-0.,-0.,-1.));+#7420 = DIRECTION('',(-1.,0.,0.));+#7421 = DEFINITIONAL_REPRESENTATION('',(#7422),#7426);+#7422 = LINE('',#7423,#7424);+#7423 = CARTESIAN_POINT('',(0.7175,-0.15));+#7424 = VECTOR('',#7425,1.);+#7425 = DIRECTION('',(0.,1.));+#7426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7427 = ORIENTED_EDGE('',*,*,#7428,.T.);+#7428 = EDGE_CURVE('',#7399,#7323,#7429,.T.);+#7429 = SURFACE_CURVE('',#7430,(#7434,#7441),.PCURVE_S1.);+#7430 = LINE('',#7431,#7432);+#7431 = CARTESIAN_POINT('',(2.4875,-3.075,0.));+#7432 = VECTOR('',#7433,1.);+#7433 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7434 = PCURVE('',#7383,#7435);+#7435 = DEFINITIONAL_REPRESENTATION('',(#7436),#7440);+#7436 = LINE('',#7437,#7438);+#7437 = CARTESIAN_POINT('',(0.,-0.15));+#7438 = VECTOR('',#7439,1.);+#7439 = DIRECTION('',(1.,0.));+#7440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7441 = PCURVE('',#7149,#7442);+#7442 = DEFINITIONAL_REPRESENTATION('',(#7443),#7447);+#7443 = LINE('',#7444,#7445);+#7444 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#7445 = VECTOR('',#7446,1.);+#7446 = DIRECTION('',(0.839949759337,-0.542664170358));+#7447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7448 = ORIENTED_EDGE('',*,*,#7369,.F.);+#7449 = ORIENTED_EDGE('',*,*,#7450,.F.);+#7450 = EDGE_CURVE('',#7401,#7347,#7451,.T.);+#7451 = SURFACE_CURVE('',#7452,(#7456,#7463),.PCURVE_S1.);+#7452 = LINE('',#7453,#7454);+#7453 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#7454 = VECTOR('',#7455,1.);+#7455 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#7456 = PCURVE('',#7383,#7457);+#7457 = DEFINITIONAL_REPRESENTATION('',(#7458),#7462);+#7458 = LINE('',#7459,#7460);+#7459 = CARTESIAN_POINT('',(0.,0.15));+#7460 = VECTOR('',#7461,1.);+#7461 = DIRECTION('',(1.,0.));+#7462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7463 = PCURVE('',#7205,#7464);+#7464 = DEFINITIONAL_REPRESENTATION('',(#7465),#7469);+#7465 = LINE('',#7466,#7467);+#7466 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#7467 = VECTOR('',#7468,1.);+#7468 = DIRECTION('',(0.839949759337,-0.542664170358));+#7469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7470 = ADVANCED_FACE('',(#7471),#7416,.T.);+#7471 = FACE_BOUND('',#7472,.T.);+#7472 = EDGE_LOOP('',(#7473,#7503,#7524,#7525));+#7473 = ORIENTED_EDGE('',*,*,#7474,.F.);+#7474 = EDGE_CURVE('',#7475,#7477,#7479,.T.);+#7475 = VERTEX_POINT('',#7476);+#7476 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7477 = VERTEX_POINT('',#7478);+#7478 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#7479 = SURFACE_CURVE('',#7480,(#7484,#7491),.PCURVE_S1.);+#7480 = LINE('',#7481,#7482);+#7481 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7482 = VECTOR('',#7483,1.);+#7483 = DIRECTION('',(0.,1.,0.));+#7484 = PCURVE('',#7416,#7485);+#7485 = DEFINITIONAL_REPRESENTATION('',(#7486),#7490);+#7486 = LINE('',#7487,#7488);+#7487 = CARTESIAN_POINT('',(0.,-0.15));+#7488 = VECTOR('',#7489,1.);+#7489 = DIRECTION('',(0.,1.));+#7490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7491 = PCURVE('',#7492,#7497);+#7492 = PLANE('',#7493);+#7493 = AXIS2_PLACEMENT_3D('',#7494,#7495,#7496);+#7494 = CARTESIAN_POINT('',(3.205,-2.925,0.15));+#7495 = DIRECTION('',(1.,0.,0.));+#7496 = DIRECTION('',(0.,0.,-1.));+#7497 = DEFINITIONAL_REPRESENTATION('',(#7498),#7502);+#7498 = LINE('',#7499,#7500);+#7499 = CARTESIAN_POINT('',(0.15,-0.15));+#7500 = VECTOR('',#7501,1.);+#7501 = DIRECTION('',(0.,1.));+#7502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7503 = ORIENTED_EDGE('',*,*,#7504,.T.);+#7504 = EDGE_CURVE('',#7475,#7399,#7505,.T.);+#7505 = SURFACE_CURVE('',#7506,(#7510,#7517),.PCURVE_S1.);+#7506 = LINE('',#7507,#7508);+#7507 = CARTESIAN_POINT('',(3.205,-3.075,0.));+#7508 = VECTOR('',#7509,1.);+#7509 = DIRECTION('',(-1.,0.,0.));+#7510 = PCURVE('',#7416,#7511);+#7511 = DEFINITIONAL_REPRESENTATION('',(#7512),#7516);+#7512 = LINE('',#7513,#7514);+#7513 = CARTESIAN_POINT('',(0.,-0.15));+#7514 = VECTOR('',#7515,1.);+#7515 = DIRECTION('',(1.,0.));+#7516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7517 = PCURVE('',#7149,#7518);+#7518 = DEFINITIONAL_REPRESENTATION('',(#7519),#7523);+#7519 = LINE('',#7520,#7521);+#7520 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#7521 = VECTOR('',#7522,1.);+#7522 = DIRECTION('',(0.,-1.));+#7523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7524 = ORIENTED_EDGE('',*,*,#7398,.T.);+#7525 = ORIENTED_EDGE('',*,*,#7526,.F.);+#7526 = EDGE_CURVE('',#7477,#7401,#7527,.T.);+#7527 = SURFACE_CURVE('',#7528,(#7532,#7539),.PCURVE_S1.);+#7528 = LINE('',#7529,#7530);+#7529 = CARTESIAN_POINT('',(3.205,-2.775,0.));+#7530 = VECTOR('',#7531,1.);+#7531 = DIRECTION('',(-1.,0.,0.));+#7532 = PCURVE('',#7416,#7533);+#7533 = DEFINITIONAL_REPRESENTATION('',(#7534),#7538);+#7534 = LINE('',#7535,#7536);+#7535 = CARTESIAN_POINT('',(0.,0.15));+#7536 = VECTOR('',#7537,1.);+#7537 = DIRECTION('',(1.,0.));+#7538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7539 = PCURVE('',#7205,#7540);+#7540 = DEFINITIONAL_REPRESENTATION('',(#7541),#7545);+#7541 = LINE('',#7542,#7543);+#7542 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#7543 = VECTOR('',#7544,1.);+#7544 = DIRECTION('',(0.,-1.));+#7545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7546 = ADVANCED_FACE('',(#7547),#7492,.T.);+#7547 = FACE_BOUND('',#7548,.T.);+#7548 = EDGE_LOOP('',(#7549,#7579,#7600,#7601));+#7549 = ORIENTED_EDGE('',*,*,#7550,.F.);+#7550 = EDGE_CURVE('',#7551,#7553,#7555,.T.);+#7551 = VERTEX_POINT('',#7552);+#7552 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7553 = VERTEX_POINT('',#7554);+#7554 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#7555 = SURFACE_CURVE('',#7556,(#7560,#7567),.PCURVE_S1.);+#7556 = LINE('',#7557,#7558);+#7557 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7558 = VECTOR('',#7559,1.);+#7559 = DIRECTION('',(0.,1.,0.));+#7560 = PCURVE('',#7492,#7561);+#7561 = DEFINITIONAL_REPRESENTATION('',(#7562),#7566);+#7562 = LINE('',#7563,#7564);+#7563 = CARTESIAN_POINT('',(0.,-0.15));+#7564 = VECTOR('',#7565,1.);+#7565 = DIRECTION('',(0.,1.));+#7566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7567 = PCURVE('',#7568,#7573);+#7568 = PLANE('',#7569);+#7569 = AXIS2_PLACEMENT_3D('',#7570,#7571,#7572);+#7570 = CARTESIAN_POINT('',(2.6375,-2.925,0.15));+#7571 = DIRECTION('',(-0.,0.,1.));+#7572 = DIRECTION('',(1.,0.,0.));+#7573 = DEFINITIONAL_REPRESENTATION('',(#7574),#7578);+#7574 = LINE('',#7575,#7576);+#7575 = CARTESIAN_POINT('',(0.5675,-0.15));+#7576 = VECTOR('',#7577,1.);+#7577 = DIRECTION('',(0.,1.));+#7578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7579 = ORIENTED_EDGE('',*,*,#7580,.T.);+#7580 = EDGE_CURVE('',#7551,#7475,#7581,.T.);+#7581 = SURFACE_CURVE('',#7582,(#7586,#7593),.PCURVE_S1.);+#7582 = LINE('',#7583,#7584);+#7583 = CARTESIAN_POINT('',(3.205,-3.075,0.15));+#7584 = VECTOR('',#7585,1.);+#7585 = DIRECTION('',(0.,0.,-1.));+#7586 = PCURVE('',#7492,#7587);+#7587 = DEFINITIONAL_REPRESENTATION('',(#7588),#7592);+#7588 = LINE('',#7589,#7590);+#7589 = CARTESIAN_POINT('',(0.,-0.15));+#7590 = VECTOR('',#7591,1.);+#7591 = DIRECTION('',(1.,0.));+#7592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7593 = PCURVE('',#7149,#7594);+#7594 = DEFINITIONAL_REPRESENTATION('',(#7595),#7599);+#7595 = LINE('',#7596,#7597);+#7596 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#7597 = VECTOR('',#7598,1.);+#7598 = DIRECTION('',(-1.,0.));+#7599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7600 = ORIENTED_EDGE('',*,*,#7474,.T.);+#7601 = ORIENTED_EDGE('',*,*,#7602,.F.);+#7602 = EDGE_CURVE('',#7553,#7477,#7603,.T.);+#7603 = SURFACE_CURVE('',#7604,(#7608,#7615),.PCURVE_S1.);+#7604 = LINE('',#7605,#7606);+#7605 = CARTESIAN_POINT('',(3.205,-2.775,0.15));+#7606 = VECTOR('',#7607,1.);+#7607 = DIRECTION('',(0.,0.,-1.));+#7608 = PCURVE('',#7492,#7609);+#7609 = DEFINITIONAL_REPRESENTATION('',(#7610),#7614);+#7610 = LINE('',#7611,#7612);+#7611 = CARTESIAN_POINT('',(0.,0.15));+#7612 = VECTOR('',#7613,1.);+#7613 = DIRECTION('',(1.,0.));+#7614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7615 = PCURVE('',#7205,#7616);+#7616 = DEFINITIONAL_REPRESENTATION('',(#7617),#7621);+#7617 = LINE('',#7618,#7619);+#7618 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#7619 = VECTOR('',#7620,1.);+#7620 = DIRECTION('',(-1.,0.));+#7621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7622 = ADVANCED_FACE('',(#7623),#7568,.T.);+#7623 = FACE_BOUND('',#7624,.T.);+#7624 = EDGE_LOOP('',(#7625,#7650,#7671,#7672));+#7625 = ORIENTED_EDGE('',*,*,#7626,.F.);+#7626 = EDGE_CURVE('',#7627,#7629,#7631,.T.);+#7627 = VERTEX_POINT('',#7628);+#7628 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7629 = VERTEX_POINT('',#7630);+#7630 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#7631 = SURFACE_CURVE('',#7632,(#7636,#7643),.PCURVE_S1.);+#7632 = LINE('',#7633,#7634);+#7633 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7634 = VECTOR('',#7635,1.);+#7635 = DIRECTION('',(0.,1.,0.));+#7636 = PCURVE('',#7568,#7637);+#7637 = DEFINITIONAL_REPRESENTATION('',(#7638),#7642);+#7638 = LINE('',#7639,#7640);+#7639 = CARTESIAN_POINT('',(0.,-0.15));+#7640 = VECTOR('',#7641,1.);+#7641 = DIRECTION('',(0.,1.));+#7642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7643 = PCURVE('',#7177,#7644);+#7644 = DEFINITIONAL_REPRESENTATION('',(#7645),#7649);+#7645 = LINE('',#7646,#7647);+#7646 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#7647 = VECTOR('',#7648,1.);+#7648 = DIRECTION('',(0.,1.));+#7649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7650 = ORIENTED_EDGE('',*,*,#7651,.T.);+#7651 = EDGE_CURVE('',#7627,#7551,#7652,.T.);+#7652 = SURFACE_CURVE('',#7653,(#7657,#7664),.PCURVE_S1.);+#7653 = LINE('',#7654,#7655);+#7654 = CARTESIAN_POINT('',(2.6375,-3.075,0.15));+#7655 = VECTOR('',#7656,1.);+#7656 = DIRECTION('',(1.,0.,0.));+#7657 = PCURVE('',#7568,#7658);+#7658 = DEFINITIONAL_REPRESENTATION('',(#7659),#7663);+#7659 = LINE('',#7660,#7661);+#7660 = CARTESIAN_POINT('',(0.,-0.15));+#7661 = VECTOR('',#7662,1.);+#7662 = DIRECTION('',(1.,0.));+#7663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7664 = PCURVE('',#7149,#7665); #7665 = DEFINITIONAL_REPRESENTATION('',(#7666),#7670); #7666 = LINE('',#7667,#7668);-#7667 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#7667 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03)); #7668 = VECTOR('',#7669,1.);-#7669 = DIRECTION('',(0.,-1.));+#7669 = DIRECTION('',(0.,1.)); #7670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7671 = PCURVE('',#7467,#7672);-#7672 = DEFINITIONAL_REPRESENTATION('',(#7673),#7677);-#7673 = LINE('',#7674,#7675);-#7674 = CARTESIAN_POINT('',(0.,0.15));-#7675 = VECTOR('',#7676,1.);-#7676 = DIRECTION('',(1.,0.));-#7677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7678 = ORIENTED_EDGE('',*,*,#7679,.T.);-#7679 = EDGE_CURVE('',#7657,#7535,#7680,.T.);-#7680 = SURFACE_CURVE('',#7681,(#7685,#7692),.PCURVE_S1.);+#7671 = ORIENTED_EDGE('',*,*,#7550,.T.);+#7672 = ORIENTED_EDGE('',*,*,#7673,.F.);+#7673 = EDGE_CURVE('',#7629,#7553,#7674,.T.);+#7674 = SURFACE_CURVE('',#7675,(#7679,#7686),.PCURVE_S1.);+#7675 = LINE('',#7676,#7677);+#7676 = CARTESIAN_POINT('',(2.6375,-2.775,0.15));+#7677 = VECTOR('',#7678,1.);+#7678 = DIRECTION('',(1.,0.,0.));+#7679 = PCURVE('',#7568,#7680);+#7680 = DEFINITIONAL_REPRESENTATION('',(#7681),#7685); #7681 = LINE('',#7682,#7683);-#7682 = CARTESIAN_POINT('',(2.4875,-2.775,0.));+#7682 = CARTESIAN_POINT('',(0.,0.15)); #7683 = VECTOR('',#7684,1.);-#7684 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#7685 = PCURVE('',#7205,#7686);-#7686 = DEFINITIONAL_REPRESENTATION('',(#7687),#7691);-#7687 = LINE('',#7688,#7689);-#7688 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#7689 = VECTOR('',#7690,1.);-#7690 = DIRECTION('',(0.839949759337,-0.542664170358));-#7691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7692 = PCURVE('',#7495,#7693);-#7693 = DEFINITIONAL_REPRESENTATION('',(#7694),#7698);-#7694 = LINE('',#7695,#7696);-#7695 = CARTESIAN_POINT('',(0.,0.15));-#7696 = VECTOR('',#7697,1.);-#7697 = DIRECTION('',(1.,0.));-#7698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7699 = ORIENTED_EDGE('',*,*,#7534,.T.);-#7700 = ORIENTED_EDGE('',*,*,#7270,.T.);-#7701 = ADVANCED_FACE('',(#7702),#7439,.T.);-#7702 = FACE_BOUND('',#7703,.T.);-#7703 = EDGE_LOOP('',(#7704,#7705,#7706,#7727));-#7704 = ORIENTED_EDGE('',*,*,#7583,.F.);-#7705 = ORIENTED_EDGE('',*,*,#7423,.T.);-#7706 = ORIENTED_EDGE('',*,*,#7707,.T.);-#7707 = EDGE_CURVE('',#7424,#7634,#7708,.T.);-#7708 = SURFACE_CURVE('',#7709,(#7713,#7720),.PCURVE_S1.);-#7709 = LINE('',#7710,#7711);-#7710 = CARTESIAN_POINT('',(3.205,-3.075,0.));-#7711 = VECTOR('',#7712,1.);-#7712 = DIRECTION('',(0.,1.,0.));-#7713 = PCURVE('',#7439,#7714);-#7714 = DEFINITIONAL_REPRESENTATION('',(#7715),#7719);-#7715 = LINE('',#7716,#7717);-#7716 = CARTESIAN_POINT('',(0.15,-0.15));-#7717 = VECTOR('',#7718,1.);-#7718 = DIRECTION('',(0.,1.));-#7719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7720 = PCURVE('',#7467,#7721);-#7721 = DEFINITIONAL_REPRESENTATION('',(#7722),#7726);-#7722 = LINE('',#7723,#7724);-#7723 = CARTESIAN_POINT('',(0.,-0.15));-#7724 = VECTOR('',#7725,1.);-#7725 = DIRECTION('',(0.,1.));-#7726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7727 = ORIENTED_EDGE('',*,*,#7633,.F.);-#7728 = ADVANCED_FACE('',(#7729),#7467,.T.);-#7729 = FACE_BOUND('',#7730,.T.);-#7730 = EDGE_LOOP('',(#7731,#7732,#7733,#7754));-#7731 = ORIENTED_EDGE('',*,*,#7707,.F.);-#7732 = ORIENTED_EDGE('',*,*,#7451,.T.);-#7733 = ORIENTED_EDGE('',*,*,#7734,.T.);-#7734 = EDGE_CURVE('',#7452,#7657,#7735,.T.);-#7735 = SURFACE_CURVE('',#7736,(#7740,#7747),.PCURVE_S1.);-#7736 = LINE('',#7737,#7738);-#7737 = CARTESIAN_POINT('',(2.4875,-3.075,0.));-#7738 = VECTOR('',#7739,1.);-#7739 = DIRECTION('',(0.,1.,0.));-#7740 = PCURVE('',#7467,#7741);-#7741 = DEFINITIONAL_REPRESENTATION('',(#7742),#7746);-#7742 = LINE('',#7743,#7744);-#7743 = CARTESIAN_POINT('',(0.7175,-0.15));-#7744 = VECTOR('',#7745,1.);-#7745 = DIRECTION('',(0.,1.));-#7746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7747 = PCURVE('',#7495,#7748);-#7748 = DEFINITIONAL_REPRESENTATION('',(#7749),#7753);-#7749 = LINE('',#7750,#7751);-#7750 = CARTESIAN_POINT('',(0.,-0.15));-#7751 = VECTOR('',#7752,1.);-#7752 = DIRECTION('',(0.,1.));-#7753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7754 = ORIENTED_EDGE('',*,*,#7656,.F.);-#7755 = ADVANCED_FACE('',(#7756),#7495,.T.);-#7756 = FACE_BOUND('',#7757,.T.);-#7757 = EDGE_LOOP('',(#7758,#7759,#7760,#7761));-#7758 = ORIENTED_EDGE('',*,*,#7734,.F.);-#7759 = ORIENTED_EDGE('',*,*,#7479,.T.);-#7760 = ORIENTED_EDGE('',*,*,#7557,.F.);-#7761 = ORIENTED_EDGE('',*,*,#7679,.F.);+#7684 = DIRECTION('',(1.,0.));+#7685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7686 = PCURVE('',#7205,#7687);+#7687 = DEFINITIONAL_REPRESENTATION('',(#7688),#7692);+#7688 = LINE('',#7689,#7690);+#7689 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#7690 = VECTOR('',#7691,1.);+#7691 = DIRECTION('',(0.,1.));+#7692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7693 = ADVANCED_FACE('',(#7694),#7205,.T.);+#7694 = FACE_BOUND('',#7695,.T.);+#7695 = EDGE_LOOP('',(#7696,#7697,#7718,#7719,#7720,#7721,#7722,#7723));+#7696 = ORIENTED_EDGE('',*,*,#7189,.T.);+#7697 = ORIENTED_EDGE('',*,*,#7698,.T.);+#7698 = EDGE_CURVE('',#7162,#7629,#7699,.T.);+#7699 = SURFACE_CURVE('',#7700,(#7704,#7711),.PCURVE_S1.);+#7700 = LINE('',#7701,#7702);+#7701 = CARTESIAN_POINT('',(2.35,-2.775,0.595));+#7702 = VECTOR('',#7703,1.);+#7703 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7704 = PCURVE('',#7205,#7705);+#7705 = DEFINITIONAL_REPRESENTATION('',(#7706),#7710);+#7706 = LINE('',#7707,#7708);+#7707 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#7708 = VECTOR('',#7709,1.);+#7709 = DIRECTION('',(-0.839949759337,0.542664170358));+#7710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7711 = PCURVE('',#7177,#7712);+#7712 = DEFINITIONAL_REPRESENTATION('',(#7713),#7717);+#7713 = LINE('',#7714,#7715);+#7714 = CARTESIAN_POINT('',(0.,0.15));+#7715 = VECTOR('',#7716,1.);+#7716 = DIRECTION('',(1.,0.));+#7717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7718 = ORIENTED_EDGE('',*,*,#7673,.T.);+#7719 = ORIENTED_EDGE('',*,*,#7602,.T.);+#7720 = ORIENTED_EDGE('',*,*,#7526,.T.);+#7721 = ORIENTED_EDGE('',*,*,#7450,.T.);+#7722 = ORIENTED_EDGE('',*,*,#7346,.T.);+#7723 = ORIENTED_EDGE('',*,*,#7270,.T.);+#7724 = ADVANCED_FACE('',(#7725),#7177,.T.);+#7725 = FACE_BOUND('',#7726,.T.);+#7726 = EDGE_LOOP('',(#7727,#7728,#7749,#7750));+#7727 = ORIENTED_EDGE('',*,*,#7161,.F.);+#7728 = ORIENTED_EDGE('',*,*,#7729,.T.);+#7729 = EDGE_CURVE('',#7129,#7627,#7730,.T.);+#7730 = SURFACE_CURVE('',#7731,(#7735,#7742),.PCURVE_S1.);+#7731 = LINE('',#7732,#7733);+#7732 = CARTESIAN_POINT('',(2.35,-3.075,0.595));+#7733 = VECTOR('',#7734,1.);+#7734 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#7735 = PCURVE('',#7177,#7736);+#7736 = DEFINITIONAL_REPRESENTATION('',(#7737),#7741);+#7737 = LINE('',#7738,#7739);+#7738 = CARTESIAN_POINT('',(0.,-0.15));+#7739 = VECTOR('',#7740,1.);+#7740 = DIRECTION('',(1.,0.));+#7741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7742 = PCURVE('',#7149,#7743);+#7743 = DEFINITIONAL_REPRESENTATION('',(#7744),#7748);+#7744 = LINE('',#7745,#7746);+#7745 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#7746 = VECTOR('',#7747,1.);+#7747 = DIRECTION('',(-0.839949759337,0.542664170358));+#7748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7749 = ORIENTED_EDGE('',*,*,#7626,.T.);+#7750 = ORIENTED_EDGE('',*,*,#7698,.F.);+#7751 = ADVANCED_FACE('',(#7752),#7149,.F.);+#7752 = FACE_BOUND('',#7753,.F.);+#7753 = EDGE_LOOP('',(#7754,#7755,#7756,#7757,#7758,#7759,#7760,#7761));+#7754 = ORIENTED_EDGE('',*,*,#7126,.T.);+#7755 = ORIENTED_EDGE('',*,*,#7729,.T.);+#7756 = ORIENTED_EDGE('',*,*,#7651,.T.);+#7757 = ORIENTED_EDGE('',*,*,#7580,.T.);+#7758 = ORIENTED_EDGE('',*,*,#7504,.T.);+#7759 = ORIENTED_EDGE('',*,*,#7428,.T.);+#7760 = ORIENTED_EDGE('',*,*,#7322,.T.);+#7761 = ORIENTED_EDGE('',*,*,#7246,.T.); #7762 = MANIFOLD_SOLID_BREP('',#7763);-#7763 = CLOSED_SHELL('',(#7764,#7884,#7960,#8036,#8170,#8219,#8268,#8343- ,#8370,#8397));+#7763 = CLOSED_SHELL('',(#7764,#7884,#7960,#8036,#8112,#8188,#8264,#8335+ ,#8366,#8393)); #7764 = ADVANCED_FACE('',(#7765),#7779,.T.); #7765 = FACE_BOUND('',#7766,.T.); #7766 = EDGE_LOOP('',(#7767,#7802,#7830,#7858));@@ -9178,521 +9178,521 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #7959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7960 = ADVANCED_FACE('',(#7961),#7819,.T.);+#7960 = ADVANCED_FACE('',(#7961),#7949,.T.); #7961 = FACE_BOUND('',#7962,.T.);-#7962 = EDGE_LOOP('',(#7963,#7964,#7987,#8015));-#7963 = ORIENTED_EDGE('',*,*,#7803,.F.);-#7964 = ORIENTED_EDGE('',*,*,#7965,.T.);-#7965 = EDGE_CURVE('',#7771,#7966,#7968,.T.);-#7966 = VERTEX_POINT('',#7967);-#7967 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));-#7968 = SURFACE_CURVE('',#7969,(#7973,#7980),.PCURVE_S1.);-#7969 = LINE('',#7970,#7971);-#7970 = CARTESIAN_POINT('',(2.35,-2.425,0.595));-#7971 = VECTOR('',#7972,1.);-#7972 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#7973 = PCURVE('',#7819,#7974);-#7974 = DEFINITIONAL_REPRESENTATION('',(#7975),#7979);-#7975 = LINE('',#7976,#7977);-#7976 = CARTESIAN_POINT('',(0.,-0.15));-#7977 = VECTOR('',#7978,1.);-#7978 = DIRECTION('',(1.,0.));-#7979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7980 = PCURVE('',#7791,#7981);-#7981 = DEFINITIONAL_REPRESENTATION('',(#7982),#7986);-#7982 = LINE('',#7983,#7984);-#7983 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));-#7984 = VECTOR('',#7985,1.);-#7985 = DIRECTION('',(-0.839949759337,0.542664170358));-#7986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7987 = ORIENTED_EDGE('',*,*,#7988,.T.);-#7988 = EDGE_CURVE('',#7966,#7989,#7991,.T.);+#7962 = EDGE_LOOP('',(#7963,#7986,#7987,#8010));+#7963 = ORIENTED_EDGE('',*,*,#7964,.T.);+#7964 = EDGE_CURVE('',#7965,#7889,#7967,.T.);+#7965 = VERTEX_POINT('',#7966);+#7966 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#7967 = SURFACE_CURVE('',#7968,(#7972,#7979),.PCURVE_S1.);+#7968 = LINE('',#7969,#7970);+#7969 = CARTESIAN_POINT('',(2.2,-2.425,0.445));+#7970 = VECTOR('',#7971,1.);+#7971 = DIRECTION('',(-1.,0.,0.));+#7972 = PCURVE('',#7949,#7973);+#7973 = DEFINITIONAL_REPRESENTATION('',(#7974),#7978);+#7974 = LINE('',#7975,#7976);+#7975 = CARTESIAN_POINT('',(0.,-0.15));+#7976 = VECTOR('',#7977,1.);+#7977 = DIRECTION('',(1.,0.));+#7978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7979 = PCURVE('',#7791,#7980);+#7980 = DEFINITIONAL_REPRESENTATION('',(#7981),#7985);+#7981 = LINE('',#7982,#7983);+#7982 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#7983 = VECTOR('',#7984,1.);+#7984 = DIRECTION('',(0.,-1.));+#7985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7986 = ORIENTED_EDGE('',*,*,#7935,.F.);+#7987 = ORIENTED_EDGE('',*,*,#7988,.F.);+#7988 = EDGE_CURVE('',#7989,#7913,#7991,.T.); #7989 = VERTEX_POINT('',#7990);-#7990 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#7990 = CARTESIAN_POINT('',(2.2,-2.125,0.445)); #7991 = SURFACE_CURVE('',#7992,(#7996,#8003),.PCURVE_S1.); #7992 = LINE('',#7993,#7994);-#7993 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#7993 = CARTESIAN_POINT('',(2.2,-2.125,0.445)); #7994 = VECTOR('',#7995,1.);-#7995 = DIRECTION('',(0.,1.,0.));-#7996 = PCURVE('',#7819,#7997);+#7995 = DIRECTION('',(-1.,0.,0.));+#7996 = PCURVE('',#7949,#7997); #7997 = DEFINITIONAL_REPRESENTATION('',(#7998),#8002); #7998 = LINE('',#7999,#8000);-#7999 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#7999 = CARTESIAN_POINT('',(0.,0.15)); #8000 = VECTOR('',#8001,1.);-#8001 = DIRECTION('',(0.,1.));+#8001 = DIRECTION('',(1.,0.)); #8002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8003 = PCURVE('',#8004,#8009);-#8004 = PLANE('',#8005);-#8005 = AXIS2_PLACEMENT_3D('',#8006,#8007,#8008);-#8006 = CARTESIAN_POINT('',(2.6375,-2.275,0.15));-#8007 = DIRECTION('',(-0.,0.,1.));-#8008 = DIRECTION('',(1.,0.,0.));-#8009 = DEFINITIONAL_REPRESENTATION('',(#8010),#8014);-#8010 = LINE('',#8011,#8012);-#8011 = CARTESIAN_POINT('',(0.,-0.15));-#8012 = VECTOR('',#8013,1.);-#8013 = DIRECTION('',(0.,1.));-#8014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8015 = ORIENTED_EDGE('',*,*,#8016,.F.);-#8016 = EDGE_CURVE('',#7804,#7989,#8017,.T.);-#8017 = SURFACE_CURVE('',#8018,(#8022,#8029),.PCURVE_S1.);-#8018 = LINE('',#8019,#8020);-#8019 = CARTESIAN_POINT('',(2.35,-2.125,0.595));-#8020 = VECTOR('',#8021,1.);-#8021 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#8022 = PCURVE('',#7819,#8023);-#8023 = DEFINITIONAL_REPRESENTATION('',(#8024),#8028);-#8024 = LINE('',#8025,#8026);-#8025 = CARTESIAN_POINT('',(0.,0.15));-#8026 = VECTOR('',#8027,1.);-#8027 = DIRECTION('',(1.,0.));-#8028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8029 = PCURVE('',#7847,#8030);+#8003 = PCURVE('',#7847,#8004);+#8004 = DEFINITIONAL_REPRESENTATION('',(#8005),#8009);+#8005 = LINE('',#8006,#8007);+#8006 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#8007 = VECTOR('',#8008,1.);+#8008 = DIRECTION('',(0.,-1.));+#8009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8010 = ORIENTED_EDGE('',*,*,#8011,.T.);+#8011 = EDGE_CURVE('',#7989,#7965,#8012,.T.);+#8012 = SURFACE_CURVE('',#8013,(#8017,#8024),.PCURVE_S1.);+#8013 = LINE('',#8014,#8015);+#8014 = CARTESIAN_POINT('',(2.2,-2.125,0.445));+#8015 = VECTOR('',#8016,1.);+#8016 = DIRECTION('',(0.,-1.,0.));+#8017 = PCURVE('',#7949,#8018);+#8018 = DEFINITIONAL_REPRESENTATION('',(#8019),#8023);+#8019 = LINE('',#8020,#8021);+#8020 = CARTESIAN_POINT('',(0.,0.15));+#8021 = VECTOR('',#8022,1.);+#8022 = DIRECTION('',(0.,-1.));+#8023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8024 = PCURVE('',#8025,#8030);+#8025 = PLANE('',#8026);+#8026 = AXIS2_PLACEMENT_3D('',#8027,#8028,#8029);+#8027 = CARTESIAN_POINT('',(2.4875,-2.275,0.));+#8028 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#8029 = DIRECTION('',(-0.542664170358,0.,0.839949759337)); #8030 = DEFINITIONAL_REPRESENTATION('',(#8031),#8035); #8031 = LINE('',#8032,#8033);-#8032 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8032 = CARTESIAN_POINT('',(0.529793591883,0.15)); #8033 = VECTOR('',#8034,1.);-#8034 = DIRECTION('',(-0.839949759337,0.542664170358));+#8034 = DIRECTION('',(0.,-1.)); #8035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8036 = ADVANCED_FACE('',(#8037),#7791,.F.);-#8037 = FACE_BOUND('',#8038,.F.);-#8038 = EDGE_LOOP('',(#8039,#8040,#8041,#8064,#8092,#8120,#8148,#8169));-#8039 = ORIENTED_EDGE('',*,*,#7768,.T.);-#8040 = ORIENTED_EDGE('',*,*,#7965,.T.);-#8041 = ORIENTED_EDGE('',*,*,#8042,.T.);-#8042 = EDGE_CURVE('',#7966,#8043,#8045,.T.);+#8036 = ADVANCED_FACE('',(#8037),#8025,.T.);+#8037 = FACE_BOUND('',#8038,.T.);+#8038 = EDGE_LOOP('',(#8039,#8069,#8090,#8091));+#8039 = ORIENTED_EDGE('',*,*,#8040,.F.);+#8040 = EDGE_CURVE('',#8041,#8043,#8045,.T.);+#8041 = VERTEX_POINT('',#8042);+#8042 = CARTESIAN_POINT('',(2.4875,-2.425,0.)); #8043 = VERTEX_POINT('',#8044);-#8044 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8044 = CARTESIAN_POINT('',(2.4875,-2.125,0.)); #8045 = SURFACE_CURVE('',#8046,(#8050,#8057),.PCURVE_S1.); #8046 = LINE('',#8047,#8048);-#8047 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8047 = CARTESIAN_POINT('',(2.4875,-2.425,0.)); #8048 = VECTOR('',#8049,1.);-#8049 = DIRECTION('',(1.,0.,0.));-#8050 = PCURVE('',#7791,#8051);+#8049 = DIRECTION('',(0.,1.,0.));+#8050 = PCURVE('',#8025,#8051); #8051 = DEFINITIONAL_REPRESENTATION('',(#8052),#8056); #8052 = LINE('',#8053,#8054);-#8053 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#8053 = CARTESIAN_POINT('',(0.,-0.15)); #8054 = VECTOR('',#8055,1.); #8055 = DIRECTION('',(0.,1.)); #8056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8057 = PCURVE('',#8004,#8058);-#8058 = DEFINITIONAL_REPRESENTATION('',(#8059),#8063);-#8059 = LINE('',#8060,#8061);-#8060 = CARTESIAN_POINT('',(0.,-0.15));-#8061 = VECTOR('',#8062,1.);-#8062 = DIRECTION('',(1.,0.));-#8063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8064 = ORIENTED_EDGE('',*,*,#8065,.T.);-#8065 = EDGE_CURVE('',#8043,#8066,#8068,.T.);-#8066 = VERTEX_POINT('',#8067);-#8067 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#8068 = SURFACE_CURVE('',#8069,(#8073,#8080),.PCURVE_S1.);-#8069 = LINE('',#8070,#8071);-#8070 = CARTESIAN_POINT('',(3.205,-2.425,0.15));-#8071 = VECTOR('',#8072,1.);-#8072 = DIRECTION('',(0.,0.,-1.));-#8073 = PCURVE('',#7791,#8074);-#8074 = DEFINITIONAL_REPRESENTATION('',(#8075),#8079);-#8075 = LINE('',#8076,#8077);-#8076 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#8077 = VECTOR('',#8078,1.);-#8078 = DIRECTION('',(-1.,0.));-#8079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8080 = PCURVE('',#8081,#8086);-#8081 = PLANE('',#8082);-#8082 = AXIS2_PLACEMENT_3D('',#8083,#8084,#8085);-#8083 = CARTESIAN_POINT('',(3.205,-2.275,0.15));-#8084 = DIRECTION('',(1.,0.,0.));-#8085 = DIRECTION('',(0.,0.,-1.));-#8086 = DEFINITIONAL_REPRESENTATION('',(#8087),#8091);-#8087 = LINE('',#8088,#8089);-#8088 = CARTESIAN_POINT('',(0.,-0.15));-#8089 = VECTOR('',#8090,1.);-#8090 = DIRECTION('',(1.,0.));-#8091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8092 = ORIENTED_EDGE('',*,*,#8093,.T.);-#8093 = EDGE_CURVE('',#8066,#8094,#8096,.T.);-#8094 = VERTEX_POINT('',#8095);-#8095 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#8096 = SURFACE_CURVE('',#8097,(#8101,#8108),.PCURVE_S1.);-#8097 = LINE('',#8098,#8099);-#8098 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#8099 = VECTOR('',#8100,1.);-#8100 = DIRECTION('',(-1.,0.,0.));-#8101 = PCURVE('',#7791,#8102);-#8102 = DEFINITIONAL_REPRESENTATION('',(#8103),#8107);-#8103 = LINE('',#8104,#8105);-#8104 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));-#8105 = VECTOR('',#8106,1.);-#8106 = DIRECTION('',(0.,-1.));-#8107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8108 = PCURVE('',#8109,#8114);-#8109 = PLANE('',#8110);-#8110 = AXIS2_PLACEMENT_3D('',#8111,#8112,#8113);-#8111 = CARTESIAN_POINT('',(3.205,-2.275,0.));-#8112 = DIRECTION('',(-0.,-0.,-1.));-#8113 = DIRECTION('',(-1.,0.,0.));-#8114 = DEFINITIONAL_REPRESENTATION('',(#8115),#8119);-#8115 = LINE('',#8116,#8117);-#8116 = CARTESIAN_POINT('',(0.,-0.15));-#8117 = VECTOR('',#8118,1.);-#8118 = DIRECTION('',(1.,0.));-#8119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8120 = ORIENTED_EDGE('',*,*,#8121,.T.);-#8121 = EDGE_CURVE('',#8094,#8122,#8124,.T.);-#8122 = VERTEX_POINT('',#8123);-#8123 = CARTESIAN_POINT('',(2.2,-2.425,0.445));-#8124 = SURFACE_CURVE('',#8125,(#8129,#8136),.PCURVE_S1.);-#8125 = LINE('',#8126,#8127);-#8126 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#8127 = VECTOR('',#8128,1.);-#8128 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8129 = PCURVE('',#7791,#8130);-#8130 = DEFINITIONAL_REPRESENTATION('',(#8131),#8135);-#8131 = LINE('',#8132,#8133);-#8132 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#8133 = VECTOR('',#8134,1.);-#8134 = DIRECTION('',(0.839949759337,-0.542664170358));-#8135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8136 = PCURVE('',#8137,#8142);-#8137 = PLANE('',#8138);-#8138 = AXIS2_PLACEMENT_3D('',#8139,#8140,#8141);-#8139 = CARTESIAN_POINT('',(2.4875,-2.275,0.));-#8140 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#8141 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8142 = DEFINITIONAL_REPRESENTATION('',(#8143),#8147);-#8143 = LINE('',#8144,#8145);-#8144 = CARTESIAN_POINT('',(0.,-0.15));-#8145 = VECTOR('',#8146,1.);-#8146 = DIRECTION('',(1.,0.));-#8147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8148 = ORIENTED_EDGE('',*,*,#8149,.T.);-#8149 = EDGE_CURVE('',#8122,#7889,#8150,.T.);-#8150 = SURFACE_CURVE('',#8151,(#8155,#8162),.PCURVE_S1.);-#8151 = LINE('',#8152,#8153);-#8152 = CARTESIAN_POINT('',(2.2,-2.425,0.445));-#8153 = VECTOR('',#8154,1.);-#8154 = DIRECTION('',(-1.,0.,0.));-#8155 = PCURVE('',#7791,#8156);-#8156 = DEFINITIONAL_REPRESENTATION('',(#8157),#8161);-#8157 = LINE('',#8158,#8159);-#8158 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#8159 = VECTOR('',#8160,1.);-#8160 = DIRECTION('',(0.,-1.));-#8161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8162 = PCURVE('',#7949,#8163);-#8163 = DEFINITIONAL_REPRESENTATION('',(#8164),#8168);-#8164 = LINE('',#8165,#8166);-#8165 = CARTESIAN_POINT('',(0.,-0.15));-#8166 = VECTOR('',#8167,1.);-#8167 = DIRECTION('',(1.,0.));-#8168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8169 = ORIENTED_EDGE('',*,*,#7888,.T.);-#8170 = ADVANCED_FACE('',(#8171),#7949,.T.);-#8171 = FACE_BOUND('',#8172,.T.);-#8172 = EDGE_LOOP('',(#8173,#8174,#8175,#8198));-#8173 = ORIENTED_EDGE('',*,*,#8149,.T.);-#8174 = ORIENTED_EDGE('',*,*,#7935,.F.);-#8175 = ORIENTED_EDGE('',*,*,#8176,.F.);-#8176 = EDGE_CURVE('',#8177,#7913,#8179,.T.);-#8177 = VERTEX_POINT('',#8178);-#8178 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#8179 = SURFACE_CURVE('',#8180,(#8184,#8191),.PCURVE_S1.);-#8180 = LINE('',#8181,#8182);-#8181 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#8182 = VECTOR('',#8183,1.);-#8183 = DIRECTION('',(-1.,0.,0.));-#8184 = PCURVE('',#7949,#8185);-#8185 = DEFINITIONAL_REPRESENTATION('',(#8186),#8190);-#8186 = LINE('',#8187,#8188);-#8187 = CARTESIAN_POINT('',(0.,0.15));-#8188 = VECTOR('',#8189,1.);-#8189 = DIRECTION('',(1.,0.));-#8190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8191 = PCURVE('',#7847,#8192);-#8192 = DEFINITIONAL_REPRESENTATION('',(#8193),#8197);-#8193 = LINE('',#8194,#8195);-#8194 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#8195 = VECTOR('',#8196,1.);-#8196 = DIRECTION('',(0.,-1.));-#8197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8198 = ORIENTED_EDGE('',*,*,#8199,.T.);-#8199 = EDGE_CURVE('',#8177,#8122,#8200,.T.);-#8200 = SURFACE_CURVE('',#8201,(#8205,#8212),.PCURVE_S1.);-#8201 = LINE('',#8202,#8203);-#8202 = CARTESIAN_POINT('',(2.2,-2.125,0.445));-#8203 = VECTOR('',#8204,1.);-#8204 = DIRECTION('',(0.,-1.,0.));-#8205 = PCURVE('',#7949,#8206);-#8206 = DEFINITIONAL_REPRESENTATION('',(#8207),#8211);-#8207 = LINE('',#8208,#8209);-#8208 = CARTESIAN_POINT('',(0.,0.15));-#8209 = VECTOR('',#8210,1.);-#8210 = DIRECTION('',(0.,-1.));-#8211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8212 = PCURVE('',#8137,#8213);-#8213 = DEFINITIONAL_REPRESENTATION('',(#8214),#8218);-#8214 = LINE('',#8215,#8216);-#8215 = CARTESIAN_POINT('',(0.529793591883,0.15));-#8216 = VECTOR('',#8217,1.);-#8217 = DIRECTION('',(0.,-1.));-#8218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8219 = ADVANCED_FACE('',(#8220),#8004,.T.);-#8220 = FACE_BOUND('',#8221,.T.);-#8221 = EDGE_LOOP('',(#8222,#8223,#8224,#8247));-#8222 = ORIENTED_EDGE('',*,*,#7988,.F.);-#8223 = ORIENTED_EDGE('',*,*,#8042,.T.);-#8224 = ORIENTED_EDGE('',*,*,#8225,.T.);-#8225 = EDGE_CURVE('',#8043,#8226,#8228,.T.);-#8226 = VERTEX_POINT('',#8227);-#8227 = CARTESIAN_POINT('',(3.205,-2.125,0.15));-#8228 = SURFACE_CURVE('',#8229,(#8233,#8240),.PCURVE_S1.);-#8229 = LINE('',#8230,#8231);-#8230 = CARTESIAN_POINT('',(3.205,-2.425,0.15));-#8231 = VECTOR('',#8232,1.);-#8232 = DIRECTION('',(0.,1.,0.));-#8233 = PCURVE('',#8004,#8234);-#8234 = DEFINITIONAL_REPRESENTATION('',(#8235),#8239);-#8235 = LINE('',#8236,#8237);-#8236 = CARTESIAN_POINT('',(0.5675,-0.15));-#8237 = VECTOR('',#8238,1.);-#8238 = DIRECTION('',(0.,1.));-#8239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8240 = PCURVE('',#8081,#8241);-#8241 = DEFINITIONAL_REPRESENTATION('',(#8242),#8246);-#8242 = LINE('',#8243,#8244);-#8243 = CARTESIAN_POINT('',(0.,-0.15));-#8244 = VECTOR('',#8245,1.);-#8245 = DIRECTION('',(0.,1.));-#8246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8247 = ORIENTED_EDGE('',*,*,#8248,.F.);-#8248 = EDGE_CURVE('',#7989,#8226,#8249,.T.);-#8249 = SURFACE_CURVE('',#8250,(#8254,#8261),.PCURVE_S1.);-#8250 = LINE('',#8251,#8252);-#8251 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));-#8252 = VECTOR('',#8253,1.);-#8253 = DIRECTION('',(1.,0.,0.));-#8254 = PCURVE('',#8004,#8255);-#8255 = DEFINITIONAL_REPRESENTATION('',(#8256),#8260);-#8256 = LINE('',#8257,#8258);-#8257 = CARTESIAN_POINT('',(0.,0.15));-#8258 = VECTOR('',#8259,1.);-#8259 = DIRECTION('',(1.,0.));-#8260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8261 = PCURVE('',#7847,#8262);-#8262 = DEFINITIONAL_REPRESENTATION('',(#8263),#8267);-#8263 = LINE('',#8264,#8265);-#8264 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));-#8265 = VECTOR('',#8266,1.);-#8266 = DIRECTION('',(0.,1.));-#8267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8268 = ADVANCED_FACE('',(#8269),#7847,.T.);-#8269 = FACE_BOUND('',#8270,.T.);-#8270 = EDGE_LOOP('',(#8271,#8272,#8273,#8274,#8297,#8320,#8341,#8342));-#8271 = ORIENTED_EDGE('',*,*,#7831,.T.);-#8272 = ORIENTED_EDGE('',*,*,#8016,.T.);-#8273 = ORIENTED_EDGE('',*,*,#8248,.T.);-#8274 = ORIENTED_EDGE('',*,*,#8275,.T.);-#8275 = EDGE_CURVE('',#8226,#8276,#8278,.T.);-#8276 = VERTEX_POINT('',#8277);-#8277 = CARTESIAN_POINT('',(3.205,-2.125,0.));-#8278 = SURFACE_CURVE('',#8279,(#8283,#8290),.PCURVE_S1.);-#8279 = LINE('',#8280,#8281);-#8280 = CARTESIAN_POINT('',(3.205,-2.125,0.15));-#8281 = VECTOR('',#8282,1.);-#8282 = DIRECTION('',(0.,0.,-1.));-#8283 = PCURVE('',#7847,#8284);-#8284 = DEFINITIONAL_REPRESENTATION('',(#8285),#8289);-#8285 = LINE('',#8286,#8287);-#8286 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#8287 = VECTOR('',#8288,1.);-#8288 = DIRECTION('',(-1.,0.));-#8289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8290 = PCURVE('',#8081,#8291);-#8291 = DEFINITIONAL_REPRESENTATION('',(#8292),#8296);-#8292 = LINE('',#8293,#8294);-#8293 = CARTESIAN_POINT('',(0.,0.15));-#8294 = VECTOR('',#8295,1.);-#8295 = DIRECTION('',(1.,0.));-#8296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8297 = ORIENTED_EDGE('',*,*,#8298,.T.);-#8298 = EDGE_CURVE('',#8276,#8299,#8301,.T.);-#8299 = VERTEX_POINT('',#8300);-#8300 = CARTESIAN_POINT('',(2.4875,-2.125,0.));-#8301 = SURFACE_CURVE('',#8302,(#8306,#8313),.PCURVE_S1.);-#8302 = LINE('',#8303,#8304);-#8303 = CARTESIAN_POINT('',(3.205,-2.125,0.));-#8304 = VECTOR('',#8305,1.);-#8305 = DIRECTION('',(-1.,0.,0.));-#8306 = PCURVE('',#7847,#8307);+#8057 = PCURVE('',#8058,#8063);+#8058 = PLANE('',#8059);+#8059 = AXIS2_PLACEMENT_3D('',#8060,#8061,#8062);+#8060 = CARTESIAN_POINT('',(3.205,-2.275,0.));+#8061 = DIRECTION('',(-0.,-0.,-1.));+#8062 = DIRECTION('',(-1.,0.,0.));+#8063 = DEFINITIONAL_REPRESENTATION('',(#8064),#8068);+#8064 = LINE('',#8065,#8066);+#8065 = CARTESIAN_POINT('',(0.7175,-0.15));+#8066 = VECTOR('',#8067,1.);+#8067 = DIRECTION('',(0.,1.));+#8068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8069 = ORIENTED_EDGE('',*,*,#8070,.T.);+#8070 = EDGE_CURVE('',#8041,#7965,#8071,.T.);+#8071 = SURFACE_CURVE('',#8072,(#8076,#8083),.PCURVE_S1.);+#8072 = LINE('',#8073,#8074);+#8073 = CARTESIAN_POINT('',(2.4875,-2.425,0.));+#8074 = VECTOR('',#8075,1.);+#8075 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8076 = PCURVE('',#8025,#8077);+#8077 = DEFINITIONAL_REPRESENTATION('',(#8078),#8082);+#8078 = LINE('',#8079,#8080);+#8079 = CARTESIAN_POINT('',(0.,-0.15));+#8080 = VECTOR('',#8081,1.);+#8081 = DIRECTION('',(1.,0.));+#8082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8083 = PCURVE('',#7791,#8084);+#8084 = DEFINITIONAL_REPRESENTATION('',(#8085),#8089);+#8085 = LINE('',#8086,#8087);+#8086 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8087 = VECTOR('',#8088,1.);+#8088 = DIRECTION('',(0.839949759337,-0.542664170358));+#8089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8090 = ORIENTED_EDGE('',*,*,#8011,.F.);+#8091 = ORIENTED_EDGE('',*,*,#8092,.F.);+#8092 = EDGE_CURVE('',#8043,#7989,#8093,.T.);+#8093 = SURFACE_CURVE('',#8094,(#8098,#8105),.PCURVE_S1.);+#8094 = LINE('',#8095,#8096);+#8095 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#8096 = VECTOR('',#8097,1.);+#8097 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8098 = PCURVE('',#8025,#8099);+#8099 = DEFINITIONAL_REPRESENTATION('',(#8100),#8104);+#8100 = LINE('',#8101,#8102);+#8101 = CARTESIAN_POINT('',(0.,0.15));+#8102 = VECTOR('',#8103,1.);+#8103 = DIRECTION('',(1.,0.));+#8104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8105 = PCURVE('',#7847,#8106);+#8106 = DEFINITIONAL_REPRESENTATION('',(#8107),#8111);+#8107 = LINE('',#8108,#8109);+#8108 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8109 = VECTOR('',#8110,1.);+#8110 = DIRECTION('',(0.839949759337,-0.542664170358));+#8111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8112 = ADVANCED_FACE('',(#8113),#8058,.T.);+#8113 = FACE_BOUND('',#8114,.T.);+#8114 = EDGE_LOOP('',(#8115,#8145,#8166,#8167));+#8115 = ORIENTED_EDGE('',*,*,#8116,.F.);+#8116 = EDGE_CURVE('',#8117,#8119,#8121,.T.);+#8117 = VERTEX_POINT('',#8118);+#8118 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8119 = VERTEX_POINT('',#8120);+#8120 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#8121 = SURFACE_CURVE('',#8122,(#8126,#8133),.PCURVE_S1.);+#8122 = LINE('',#8123,#8124);+#8123 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8124 = VECTOR('',#8125,1.);+#8125 = DIRECTION('',(0.,1.,0.));+#8126 = PCURVE('',#8058,#8127);+#8127 = DEFINITIONAL_REPRESENTATION('',(#8128),#8132);+#8128 = LINE('',#8129,#8130);+#8129 = CARTESIAN_POINT('',(0.,-0.15));+#8130 = VECTOR('',#8131,1.);+#8131 = DIRECTION('',(0.,1.));+#8132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8133 = PCURVE('',#8134,#8139);+#8134 = PLANE('',#8135);+#8135 = AXIS2_PLACEMENT_3D('',#8136,#8137,#8138);+#8136 = CARTESIAN_POINT('',(3.205,-2.275,0.15));+#8137 = DIRECTION('',(1.,0.,0.));+#8138 = DIRECTION('',(0.,0.,-1.));+#8139 = DEFINITIONAL_REPRESENTATION('',(#8140),#8144);+#8140 = LINE('',#8141,#8142);+#8141 = CARTESIAN_POINT('',(0.15,-0.15));+#8142 = VECTOR('',#8143,1.);+#8143 = DIRECTION('',(0.,1.));+#8144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8145 = ORIENTED_EDGE('',*,*,#8146,.T.);+#8146 = EDGE_CURVE('',#8117,#8041,#8147,.T.);+#8147 = SURFACE_CURVE('',#8148,(#8152,#8159),.PCURVE_S1.);+#8148 = LINE('',#8149,#8150);+#8149 = CARTESIAN_POINT('',(3.205,-2.425,0.));+#8150 = VECTOR('',#8151,1.);+#8151 = DIRECTION('',(-1.,0.,0.));+#8152 = PCURVE('',#8058,#8153);+#8153 = DEFINITIONAL_REPRESENTATION('',(#8154),#8158);+#8154 = LINE('',#8155,#8156);+#8155 = CARTESIAN_POINT('',(0.,-0.15));+#8156 = VECTOR('',#8157,1.);+#8157 = DIRECTION('',(1.,0.));+#8158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8159 = PCURVE('',#7791,#8160);+#8160 = DEFINITIONAL_REPRESENTATION('',(#8161),#8165);+#8161 = LINE('',#8162,#8163);+#8162 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8163 = VECTOR('',#8164,1.);+#8164 = DIRECTION('',(0.,-1.));+#8165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8166 = ORIENTED_EDGE('',*,*,#8040,.T.);+#8167 = ORIENTED_EDGE('',*,*,#8168,.F.);+#8168 = EDGE_CURVE('',#8119,#8043,#8169,.T.);+#8169 = SURFACE_CURVE('',#8170,(#8174,#8181),.PCURVE_S1.);+#8170 = LINE('',#8171,#8172);+#8171 = CARTESIAN_POINT('',(3.205,-2.125,0.));+#8172 = VECTOR('',#8173,1.);+#8173 = DIRECTION('',(-1.,0.,0.));+#8174 = PCURVE('',#8058,#8175);+#8175 = DEFINITIONAL_REPRESENTATION('',(#8176),#8180);+#8176 = LINE('',#8177,#8178);+#8177 = CARTESIAN_POINT('',(0.,0.15));+#8178 = VECTOR('',#8179,1.);+#8179 = DIRECTION('',(1.,0.));+#8180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8181 = PCURVE('',#7847,#8182);+#8182 = DEFINITIONAL_REPRESENTATION('',(#8183),#8187);+#8183 = LINE('',#8184,#8185);+#8184 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8185 = VECTOR('',#8186,1.);+#8186 = DIRECTION('',(0.,-1.));+#8187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8188 = ADVANCED_FACE('',(#8189),#8134,.T.);+#8189 = FACE_BOUND('',#8190,.T.);+#8190 = EDGE_LOOP('',(#8191,#8221,#8242,#8243));+#8191 = ORIENTED_EDGE('',*,*,#8192,.F.);+#8192 = EDGE_CURVE('',#8193,#8195,#8197,.T.);+#8193 = VERTEX_POINT('',#8194);+#8194 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8195 = VERTEX_POINT('',#8196);+#8196 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#8197 = SURFACE_CURVE('',#8198,(#8202,#8209),.PCURVE_S1.);+#8198 = LINE('',#8199,#8200);+#8199 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8200 = VECTOR('',#8201,1.);+#8201 = DIRECTION('',(0.,1.,0.));+#8202 = PCURVE('',#8134,#8203);+#8203 = DEFINITIONAL_REPRESENTATION('',(#8204),#8208);+#8204 = LINE('',#8205,#8206);+#8205 = CARTESIAN_POINT('',(0.,-0.15));+#8206 = VECTOR('',#8207,1.);+#8207 = DIRECTION('',(0.,1.));+#8208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8209 = PCURVE('',#8210,#8215);+#8210 = PLANE('',#8211);+#8211 = AXIS2_PLACEMENT_3D('',#8212,#8213,#8214);+#8212 = CARTESIAN_POINT('',(2.6375,-2.275,0.15));+#8213 = DIRECTION('',(-0.,0.,1.));+#8214 = DIRECTION('',(1.,0.,0.));+#8215 = DEFINITIONAL_REPRESENTATION('',(#8216),#8220);+#8216 = LINE('',#8217,#8218);+#8217 = CARTESIAN_POINT('',(0.5675,-0.15));+#8218 = VECTOR('',#8219,1.);+#8219 = DIRECTION('',(0.,1.));+#8220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8221 = ORIENTED_EDGE('',*,*,#8222,.T.);+#8222 = EDGE_CURVE('',#8193,#8117,#8223,.T.);+#8223 = SURFACE_CURVE('',#8224,(#8228,#8235),.PCURVE_S1.);+#8224 = LINE('',#8225,#8226);+#8225 = CARTESIAN_POINT('',(3.205,-2.425,0.15));+#8226 = VECTOR('',#8227,1.);+#8227 = DIRECTION('',(0.,0.,-1.));+#8228 = PCURVE('',#8134,#8229);+#8229 = DEFINITIONAL_REPRESENTATION('',(#8230),#8234);+#8230 = LINE('',#8231,#8232);+#8231 = CARTESIAN_POINT('',(0.,-0.15));+#8232 = VECTOR('',#8233,1.);+#8233 = DIRECTION('',(1.,0.));+#8234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8235 = PCURVE('',#7791,#8236);+#8236 = DEFINITIONAL_REPRESENTATION('',(#8237),#8241);+#8237 = LINE('',#8238,#8239);+#8238 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8239 = VECTOR('',#8240,1.);+#8240 = DIRECTION('',(-1.,0.));+#8241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8242 = ORIENTED_EDGE('',*,*,#8116,.T.);+#8243 = ORIENTED_EDGE('',*,*,#8244,.F.);+#8244 = EDGE_CURVE('',#8195,#8119,#8245,.T.);+#8245 = SURFACE_CURVE('',#8246,(#8250,#8257),.PCURVE_S1.);+#8246 = LINE('',#8247,#8248);+#8247 = CARTESIAN_POINT('',(3.205,-2.125,0.15));+#8248 = VECTOR('',#8249,1.);+#8249 = DIRECTION('',(0.,0.,-1.));+#8250 = PCURVE('',#8134,#8251);+#8251 = DEFINITIONAL_REPRESENTATION('',(#8252),#8256);+#8252 = LINE('',#8253,#8254);+#8253 = CARTESIAN_POINT('',(0.,0.15));+#8254 = VECTOR('',#8255,1.);+#8255 = DIRECTION('',(1.,0.));+#8256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8257 = PCURVE('',#7847,#8258);+#8258 = DEFINITIONAL_REPRESENTATION('',(#8259),#8263);+#8259 = LINE('',#8260,#8261);+#8260 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8261 = VECTOR('',#8262,1.);+#8262 = DIRECTION('',(-1.,0.));+#8263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8264 = ADVANCED_FACE('',(#8265),#8210,.T.);+#8265 = FACE_BOUND('',#8266,.T.);+#8266 = EDGE_LOOP('',(#8267,#8292,#8313,#8314));+#8267 = ORIENTED_EDGE('',*,*,#8268,.F.);+#8268 = EDGE_CURVE('',#8269,#8271,#8273,.T.);+#8269 = VERTEX_POINT('',#8270);+#8270 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8271 = VERTEX_POINT('',#8272);+#8272 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#8273 = SURFACE_CURVE('',#8274,(#8278,#8285),.PCURVE_S1.);+#8274 = LINE('',#8275,#8276);+#8275 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8276 = VECTOR('',#8277,1.);+#8277 = DIRECTION('',(0.,1.,0.));+#8278 = PCURVE('',#8210,#8279);+#8279 = DEFINITIONAL_REPRESENTATION('',(#8280),#8284);+#8280 = LINE('',#8281,#8282);+#8281 = CARTESIAN_POINT('',(0.,-0.15));+#8282 = VECTOR('',#8283,1.);+#8283 = DIRECTION('',(0.,1.));+#8284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8285 = PCURVE('',#7819,#8286);+#8286 = DEFINITIONAL_REPRESENTATION('',(#8287),#8291);+#8287 = LINE('',#8288,#8289);+#8288 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#8289 = VECTOR('',#8290,1.);+#8290 = DIRECTION('',(0.,1.));+#8291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8292 = ORIENTED_EDGE('',*,*,#8293,.T.);+#8293 = EDGE_CURVE('',#8269,#8193,#8294,.T.);+#8294 = SURFACE_CURVE('',#8295,(#8299,#8306),.PCURVE_S1.);+#8295 = LINE('',#8296,#8297);+#8296 = CARTESIAN_POINT('',(2.6375,-2.425,0.15));+#8297 = VECTOR('',#8298,1.);+#8298 = DIRECTION('',(1.,0.,0.));+#8299 = PCURVE('',#8210,#8300);+#8300 = DEFINITIONAL_REPRESENTATION('',(#8301),#8305);+#8301 = LINE('',#8302,#8303);+#8302 = CARTESIAN_POINT('',(0.,-0.15));+#8303 = VECTOR('',#8304,1.);+#8304 = DIRECTION('',(1.,0.));+#8305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8306 = PCURVE('',#7791,#8307); #8307 = DEFINITIONAL_REPRESENTATION('',(#8308),#8312); #8308 = LINE('',#8309,#8310);-#8309 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8309 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03)); #8310 = VECTOR('',#8311,1.);-#8311 = DIRECTION('',(0.,-1.));+#8311 = DIRECTION('',(0.,1.)); #8312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8313 = PCURVE('',#8109,#8314);-#8314 = DEFINITIONAL_REPRESENTATION('',(#8315),#8319);-#8315 = LINE('',#8316,#8317);-#8316 = CARTESIAN_POINT('',(0.,0.15));-#8317 = VECTOR('',#8318,1.);-#8318 = DIRECTION('',(1.,0.));-#8319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8320 = ORIENTED_EDGE('',*,*,#8321,.T.);-#8321 = EDGE_CURVE('',#8299,#8177,#8322,.T.);-#8322 = SURFACE_CURVE('',#8323,(#8327,#8334),.PCURVE_S1.);+#8313 = ORIENTED_EDGE('',*,*,#8192,.T.);+#8314 = ORIENTED_EDGE('',*,*,#8315,.F.);+#8315 = EDGE_CURVE('',#8271,#8195,#8316,.T.);+#8316 = SURFACE_CURVE('',#8317,(#8321,#8328),.PCURVE_S1.);+#8317 = LINE('',#8318,#8319);+#8318 = CARTESIAN_POINT('',(2.6375,-2.125,0.15));+#8319 = VECTOR('',#8320,1.);+#8320 = DIRECTION('',(1.,0.,0.));+#8321 = PCURVE('',#8210,#8322);+#8322 = DEFINITIONAL_REPRESENTATION('',(#8323),#8327); #8323 = LINE('',#8324,#8325);-#8324 = CARTESIAN_POINT('',(2.4875,-2.125,0.));+#8324 = CARTESIAN_POINT('',(0.,0.15)); #8325 = VECTOR('',#8326,1.);-#8326 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8327 = PCURVE('',#7847,#8328);-#8328 = DEFINITIONAL_REPRESENTATION('',(#8329),#8333);-#8329 = LINE('',#8330,#8331);-#8330 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#8331 = VECTOR('',#8332,1.);-#8332 = DIRECTION('',(0.839949759337,-0.542664170358));-#8333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8334 = PCURVE('',#8137,#8335);-#8335 = DEFINITIONAL_REPRESENTATION('',(#8336),#8340);-#8336 = LINE('',#8337,#8338);-#8337 = CARTESIAN_POINT('',(0.,0.15));-#8338 = VECTOR('',#8339,1.);-#8339 = DIRECTION('',(1.,0.));-#8340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8341 = ORIENTED_EDGE('',*,*,#8176,.T.);-#8342 = ORIENTED_EDGE('',*,*,#7912,.T.);-#8343 = ADVANCED_FACE('',(#8344),#8081,.T.);-#8344 = FACE_BOUND('',#8345,.T.);-#8345 = EDGE_LOOP('',(#8346,#8347,#8348,#8369));-#8346 = ORIENTED_EDGE('',*,*,#8225,.F.);-#8347 = ORIENTED_EDGE('',*,*,#8065,.T.);-#8348 = ORIENTED_EDGE('',*,*,#8349,.T.);-#8349 = EDGE_CURVE('',#8066,#8276,#8350,.T.);-#8350 = SURFACE_CURVE('',#8351,(#8355,#8362),.PCURVE_S1.);-#8351 = LINE('',#8352,#8353);-#8352 = CARTESIAN_POINT('',(3.205,-2.425,0.));-#8353 = VECTOR('',#8354,1.);-#8354 = DIRECTION('',(0.,1.,0.));-#8355 = PCURVE('',#8081,#8356);-#8356 = DEFINITIONAL_REPRESENTATION('',(#8357),#8361);-#8357 = LINE('',#8358,#8359);-#8358 = CARTESIAN_POINT('',(0.15,-0.15));-#8359 = VECTOR('',#8360,1.);-#8360 = DIRECTION('',(0.,1.));-#8361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8362 = PCURVE('',#8109,#8363);-#8363 = DEFINITIONAL_REPRESENTATION('',(#8364),#8368);-#8364 = LINE('',#8365,#8366);-#8365 = CARTESIAN_POINT('',(0.,-0.15));-#8366 = VECTOR('',#8367,1.);-#8367 = DIRECTION('',(0.,1.));-#8368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8369 = ORIENTED_EDGE('',*,*,#8275,.F.);-#8370 = ADVANCED_FACE('',(#8371),#8109,.T.);-#8371 = FACE_BOUND('',#8372,.T.);-#8372 = EDGE_LOOP('',(#8373,#8374,#8375,#8396));-#8373 = ORIENTED_EDGE('',*,*,#8349,.F.);-#8374 = ORIENTED_EDGE('',*,*,#8093,.T.);-#8375 = ORIENTED_EDGE('',*,*,#8376,.T.);-#8376 = EDGE_CURVE('',#8094,#8299,#8377,.T.);-#8377 = SURFACE_CURVE('',#8378,(#8382,#8389),.PCURVE_S1.);-#8378 = LINE('',#8379,#8380);-#8379 = CARTESIAN_POINT('',(2.4875,-2.425,0.));-#8380 = VECTOR('',#8381,1.);-#8381 = DIRECTION('',(0.,1.,0.));-#8382 = PCURVE('',#8109,#8383);-#8383 = DEFINITIONAL_REPRESENTATION('',(#8384),#8388);-#8384 = LINE('',#8385,#8386);-#8385 = CARTESIAN_POINT('',(0.7175,-0.15));-#8386 = VECTOR('',#8387,1.);-#8387 = DIRECTION('',(0.,1.));-#8388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8389 = PCURVE('',#8137,#8390);-#8390 = DEFINITIONAL_REPRESENTATION('',(#8391),#8395);-#8391 = LINE('',#8392,#8393);-#8392 = CARTESIAN_POINT('',(0.,-0.15));-#8393 = VECTOR('',#8394,1.);-#8394 = DIRECTION('',(0.,1.));-#8395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8396 = ORIENTED_EDGE('',*,*,#8298,.F.);-#8397 = ADVANCED_FACE('',(#8398),#8137,.T.);-#8398 = FACE_BOUND('',#8399,.T.);-#8399 = EDGE_LOOP('',(#8400,#8401,#8402,#8403));-#8400 = ORIENTED_EDGE('',*,*,#8376,.F.);-#8401 = ORIENTED_EDGE('',*,*,#8121,.T.);-#8402 = ORIENTED_EDGE('',*,*,#8199,.F.);-#8403 = ORIENTED_EDGE('',*,*,#8321,.F.);+#8326 = DIRECTION('',(1.,0.));+#8327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8328 = PCURVE('',#7847,#8329);+#8329 = DEFINITIONAL_REPRESENTATION('',(#8330),#8334);+#8330 = LINE('',#8331,#8332);+#8331 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#8332 = VECTOR('',#8333,1.);+#8333 = DIRECTION('',(0.,1.));+#8334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8335 = ADVANCED_FACE('',(#8336),#7847,.T.);+#8336 = FACE_BOUND('',#8337,.T.);+#8337 = EDGE_LOOP('',(#8338,#8339,#8360,#8361,#8362,#8363,#8364,#8365));+#8338 = ORIENTED_EDGE('',*,*,#7831,.T.);+#8339 = ORIENTED_EDGE('',*,*,#8340,.T.);+#8340 = EDGE_CURVE('',#7804,#8271,#8341,.T.);+#8341 = SURFACE_CURVE('',#8342,(#8346,#8353),.PCURVE_S1.);+#8342 = LINE('',#8343,#8344);+#8343 = CARTESIAN_POINT('',(2.35,-2.125,0.595));+#8344 = VECTOR('',#8345,1.);+#8345 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8346 = PCURVE('',#7847,#8347);+#8347 = DEFINITIONAL_REPRESENTATION('',(#8348),#8352);+#8348 = LINE('',#8349,#8350);+#8349 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8350 = VECTOR('',#8351,1.);+#8351 = DIRECTION('',(-0.839949759337,0.542664170358));+#8352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8353 = PCURVE('',#7819,#8354);+#8354 = DEFINITIONAL_REPRESENTATION('',(#8355),#8359);+#8355 = LINE('',#8356,#8357);+#8356 = CARTESIAN_POINT('',(0.,0.15));+#8357 = VECTOR('',#8358,1.);+#8358 = DIRECTION('',(1.,0.));+#8359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8360 = ORIENTED_EDGE('',*,*,#8315,.T.);+#8361 = ORIENTED_EDGE('',*,*,#8244,.T.);+#8362 = ORIENTED_EDGE('',*,*,#8168,.T.);+#8363 = ORIENTED_EDGE('',*,*,#8092,.T.);+#8364 = ORIENTED_EDGE('',*,*,#7988,.T.);+#8365 = ORIENTED_EDGE('',*,*,#7912,.T.);+#8366 = ADVANCED_FACE('',(#8367),#7819,.T.);+#8367 = FACE_BOUND('',#8368,.T.);+#8368 = EDGE_LOOP('',(#8369,#8370,#8391,#8392));+#8369 = ORIENTED_EDGE('',*,*,#7803,.F.);+#8370 = ORIENTED_EDGE('',*,*,#8371,.T.);+#8371 = EDGE_CURVE('',#7771,#8269,#8372,.T.);+#8372 = SURFACE_CURVE('',#8373,(#8377,#8384),.PCURVE_S1.);+#8373 = LINE('',#8374,#8375);+#8374 = CARTESIAN_POINT('',(2.35,-2.425,0.595));+#8375 = VECTOR('',#8376,1.);+#8376 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8377 = PCURVE('',#7819,#8378);+#8378 = DEFINITIONAL_REPRESENTATION('',(#8379),#8383);+#8379 = LINE('',#8380,#8381);+#8380 = CARTESIAN_POINT('',(0.,-0.15));+#8381 = VECTOR('',#8382,1.);+#8382 = DIRECTION('',(1.,0.));+#8383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8384 = PCURVE('',#7791,#8385);+#8385 = DEFINITIONAL_REPRESENTATION('',(#8386),#8390);+#8386 = LINE('',#8387,#8388);+#8387 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8388 = VECTOR('',#8389,1.);+#8389 = DIRECTION('',(-0.839949759337,0.542664170358));+#8390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8391 = ORIENTED_EDGE('',*,*,#8268,.T.);+#8392 = ORIENTED_EDGE('',*,*,#8340,.F.);+#8393 = ADVANCED_FACE('',(#8394),#7791,.F.);+#8394 = FACE_BOUND('',#8395,.F.);+#8395 = EDGE_LOOP('',(#8396,#8397,#8398,#8399,#8400,#8401,#8402,#8403));+#8396 = ORIENTED_EDGE('',*,*,#7768,.T.);+#8397 = ORIENTED_EDGE('',*,*,#8371,.T.);+#8398 = ORIENTED_EDGE('',*,*,#8293,.T.);+#8399 = ORIENTED_EDGE('',*,*,#8222,.T.);+#8400 = ORIENTED_EDGE('',*,*,#8146,.T.);+#8401 = ORIENTED_EDGE('',*,*,#8070,.T.);+#8402 = ORIENTED_EDGE('',*,*,#7964,.T.);+#8403 = ORIENTED_EDGE('',*,*,#7888,.T.); #8404 = MANIFOLD_SOLID_BREP('',#8405);-#8405 = CLOSED_SHELL('',(#8406,#8526,#8602,#8678,#8812,#8861,#8910,#8985- ,#9012,#9039));+#8405 = CLOSED_SHELL('',(#8406,#8526,#8602,#8678,#8754,#8830,#8906,#8977+ ,#9008,#9035)); #8406 = ADVANCED_FACE('',(#8407),#8421,.T.); #8407 = FACE_BOUND('',#8408,.T.); #8408 = EDGE_LOOP('',(#8409,#8444,#8472,#8500));@@ -9917,521 +9917,521 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #8601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8602 = ADVANCED_FACE('',(#8603),#8461,.T.);+#8602 = ADVANCED_FACE('',(#8603),#8591,.T.); #8603 = FACE_BOUND('',#8604,.T.);-#8604 = EDGE_LOOP('',(#8605,#8606,#8629,#8657));-#8605 = ORIENTED_EDGE('',*,*,#8445,.F.);-#8606 = ORIENTED_EDGE('',*,*,#8607,.T.);-#8607 = EDGE_CURVE('',#8413,#8608,#8610,.T.);-#8608 = VERTEX_POINT('',#8609);-#8609 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));-#8610 = SURFACE_CURVE('',#8611,(#8615,#8622),.PCURVE_S1.);-#8611 = LINE('',#8612,#8613);-#8612 = CARTESIAN_POINT('',(2.35,-1.775,0.595));-#8613 = VECTOR('',#8614,1.);-#8614 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#8615 = PCURVE('',#8461,#8616);-#8616 = DEFINITIONAL_REPRESENTATION('',(#8617),#8621);-#8617 = LINE('',#8618,#8619);-#8618 = CARTESIAN_POINT('',(0.,-0.15));-#8619 = VECTOR('',#8620,1.);-#8620 = DIRECTION('',(1.,0.));-#8621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8622 = PCURVE('',#8433,#8623);-#8623 = DEFINITIONAL_REPRESENTATION('',(#8624),#8628);-#8624 = LINE('',#8625,#8626);-#8625 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));-#8626 = VECTOR('',#8627,1.);-#8627 = DIRECTION('',(-0.839949759337,0.542664170358));-#8628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8629 = ORIENTED_EDGE('',*,*,#8630,.T.);-#8630 = EDGE_CURVE('',#8608,#8631,#8633,.T.);+#8604 = EDGE_LOOP('',(#8605,#8628,#8629,#8652));+#8605 = ORIENTED_EDGE('',*,*,#8606,.T.);+#8606 = EDGE_CURVE('',#8607,#8531,#8609,.T.);+#8607 = VERTEX_POINT('',#8608);+#8608 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#8609 = SURFACE_CURVE('',#8610,(#8614,#8621),.PCURVE_S1.);+#8610 = LINE('',#8611,#8612);+#8611 = CARTESIAN_POINT('',(2.2,-1.775,0.445));+#8612 = VECTOR('',#8613,1.);+#8613 = DIRECTION('',(-1.,0.,0.));+#8614 = PCURVE('',#8591,#8615);+#8615 = DEFINITIONAL_REPRESENTATION('',(#8616),#8620);+#8616 = LINE('',#8617,#8618);+#8617 = CARTESIAN_POINT('',(0.,-0.15));+#8618 = VECTOR('',#8619,1.);+#8619 = DIRECTION('',(1.,0.));+#8620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8621 = PCURVE('',#8433,#8622);+#8622 = DEFINITIONAL_REPRESENTATION('',(#8623),#8627);+#8623 = LINE('',#8624,#8625);+#8624 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#8625 = VECTOR('',#8626,1.);+#8626 = DIRECTION('',(0.,-1.));+#8627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8628 = ORIENTED_EDGE('',*,*,#8577,.F.);+#8629 = ORIENTED_EDGE('',*,*,#8630,.F.);+#8630 = EDGE_CURVE('',#8631,#8555,#8633,.T.); #8631 = VERTEX_POINT('',#8632);-#8632 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#8632 = CARTESIAN_POINT('',(2.2,-1.475,0.445)); #8633 = SURFACE_CURVE('',#8634,(#8638,#8645),.PCURVE_S1.); #8634 = LINE('',#8635,#8636);-#8635 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8635 = CARTESIAN_POINT('',(2.2,-1.475,0.445)); #8636 = VECTOR('',#8637,1.);-#8637 = DIRECTION('',(0.,1.,0.));-#8638 = PCURVE('',#8461,#8639);+#8637 = DIRECTION('',(-1.,0.,0.));+#8638 = PCURVE('',#8591,#8639); #8639 = DEFINITIONAL_REPRESENTATION('',(#8640),#8644); #8640 = LINE('',#8641,#8642);-#8641 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#8641 = CARTESIAN_POINT('',(0.,0.15)); #8642 = VECTOR('',#8643,1.);-#8643 = DIRECTION('',(0.,1.));+#8643 = DIRECTION('',(1.,0.)); #8644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8645 = PCURVE('',#8646,#8651);-#8646 = PLANE('',#8647);-#8647 = AXIS2_PLACEMENT_3D('',#8648,#8649,#8650);-#8648 = CARTESIAN_POINT('',(2.6375,-1.625,0.15));-#8649 = DIRECTION('',(-0.,0.,1.));-#8650 = DIRECTION('',(1.,0.,0.));-#8651 = DEFINITIONAL_REPRESENTATION('',(#8652),#8656);-#8652 = LINE('',#8653,#8654);-#8653 = CARTESIAN_POINT('',(0.,-0.15));-#8654 = VECTOR('',#8655,1.);-#8655 = DIRECTION('',(0.,1.));-#8656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8657 = ORIENTED_EDGE('',*,*,#8658,.F.);-#8658 = EDGE_CURVE('',#8446,#8631,#8659,.T.);-#8659 = SURFACE_CURVE('',#8660,(#8664,#8671),.PCURVE_S1.);-#8660 = LINE('',#8661,#8662);-#8661 = CARTESIAN_POINT('',(2.35,-1.475,0.595));-#8662 = VECTOR('',#8663,1.);-#8663 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#8664 = PCURVE('',#8461,#8665);-#8665 = DEFINITIONAL_REPRESENTATION('',(#8666),#8670);-#8666 = LINE('',#8667,#8668);-#8667 = CARTESIAN_POINT('',(0.,0.15));-#8668 = VECTOR('',#8669,1.);-#8669 = DIRECTION('',(1.,0.));-#8670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8671 = PCURVE('',#8489,#8672);+#8645 = PCURVE('',#8489,#8646);+#8646 = DEFINITIONAL_REPRESENTATION('',(#8647),#8651);+#8647 = LINE('',#8648,#8649);+#8648 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#8649 = VECTOR('',#8650,1.);+#8650 = DIRECTION('',(0.,-1.));+#8651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8652 = ORIENTED_EDGE('',*,*,#8653,.T.);+#8653 = EDGE_CURVE('',#8631,#8607,#8654,.T.);+#8654 = SURFACE_CURVE('',#8655,(#8659,#8666),.PCURVE_S1.);+#8655 = LINE('',#8656,#8657);+#8656 = CARTESIAN_POINT('',(2.2,-1.475,0.445));+#8657 = VECTOR('',#8658,1.);+#8658 = DIRECTION('',(0.,-1.,0.));+#8659 = PCURVE('',#8591,#8660);+#8660 = DEFINITIONAL_REPRESENTATION('',(#8661),#8665);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(0.,0.15));+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(0.,-1.));+#8665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8666 = PCURVE('',#8667,#8672);+#8667 = PLANE('',#8668);+#8668 = AXIS2_PLACEMENT_3D('',#8669,#8670,#8671);+#8669 = CARTESIAN_POINT('',(2.4875,-1.625,0.));+#8670 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#8671 = DIRECTION('',(-0.542664170358,0.,0.839949759337)); #8672 = DEFINITIONAL_REPRESENTATION('',(#8673),#8677); #8673 = LINE('',#8674,#8675);-#8674 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8674 = CARTESIAN_POINT('',(0.529793591883,0.15)); #8675 = VECTOR('',#8676,1.);-#8676 = DIRECTION('',(-0.839949759337,0.542664170358));+#8676 = DIRECTION('',(0.,-1.)); #8677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8678 = ADVANCED_FACE('',(#8679),#8433,.F.);-#8679 = FACE_BOUND('',#8680,.F.);-#8680 = EDGE_LOOP('',(#8681,#8682,#8683,#8706,#8734,#8762,#8790,#8811));-#8681 = ORIENTED_EDGE('',*,*,#8410,.T.);-#8682 = ORIENTED_EDGE('',*,*,#8607,.T.);-#8683 = ORIENTED_EDGE('',*,*,#8684,.T.);-#8684 = EDGE_CURVE('',#8608,#8685,#8687,.T.);+#8678 = ADVANCED_FACE('',(#8679),#8667,.T.);+#8679 = FACE_BOUND('',#8680,.T.);+#8680 = EDGE_LOOP('',(#8681,#8711,#8732,#8733));+#8681 = ORIENTED_EDGE('',*,*,#8682,.F.);+#8682 = EDGE_CURVE('',#8683,#8685,#8687,.T.);+#8683 = VERTEX_POINT('',#8684);+#8684 = CARTESIAN_POINT('',(2.4875,-1.775,0.)); #8685 = VERTEX_POINT('',#8686);-#8686 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8686 = CARTESIAN_POINT('',(2.4875,-1.475,0.)); #8687 = SURFACE_CURVE('',#8688,(#8692,#8699),.PCURVE_S1.); #8688 = LINE('',#8689,#8690);-#8689 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8689 = CARTESIAN_POINT('',(2.4875,-1.775,0.)); #8690 = VECTOR('',#8691,1.);-#8691 = DIRECTION('',(1.,0.,0.));-#8692 = PCURVE('',#8433,#8693);+#8691 = DIRECTION('',(0.,1.,0.));+#8692 = PCURVE('',#8667,#8693); #8693 = DEFINITIONAL_REPRESENTATION('',(#8694),#8698); #8694 = LINE('',#8695,#8696);-#8695 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#8695 = CARTESIAN_POINT('',(0.,-0.15)); #8696 = VECTOR('',#8697,1.); #8697 = DIRECTION('',(0.,1.)); #8698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8699 = PCURVE('',#8646,#8700);-#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);-#8701 = LINE('',#8702,#8703);-#8702 = CARTESIAN_POINT('',(0.,-0.15));-#8703 = VECTOR('',#8704,1.);-#8704 = DIRECTION('',(1.,0.));-#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8706 = ORIENTED_EDGE('',*,*,#8707,.T.);-#8707 = EDGE_CURVE('',#8685,#8708,#8710,.T.);-#8708 = VERTEX_POINT('',#8709);-#8709 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#8710 = SURFACE_CURVE('',#8711,(#8715,#8722),.PCURVE_S1.);-#8711 = LINE('',#8712,#8713);-#8712 = CARTESIAN_POINT('',(3.205,-1.775,0.15));-#8713 = VECTOR('',#8714,1.);-#8714 = DIRECTION('',(0.,0.,-1.));-#8715 = PCURVE('',#8433,#8716);-#8716 = DEFINITIONAL_REPRESENTATION('',(#8717),#8721);-#8717 = LINE('',#8718,#8719);-#8718 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#8719 = VECTOR('',#8720,1.);-#8720 = DIRECTION('',(-1.,0.));-#8721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8722 = PCURVE('',#8723,#8728);-#8723 = PLANE('',#8724);-#8724 = AXIS2_PLACEMENT_3D('',#8725,#8726,#8727);-#8725 = CARTESIAN_POINT('',(3.205,-1.625,0.15));-#8726 = DIRECTION('',(1.,0.,0.));-#8727 = DIRECTION('',(0.,0.,-1.));-#8728 = DEFINITIONAL_REPRESENTATION('',(#8729),#8733);-#8729 = LINE('',#8730,#8731);-#8730 = CARTESIAN_POINT('',(0.,-0.15));-#8731 = VECTOR('',#8732,1.);-#8732 = DIRECTION('',(1.,0.));-#8733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8734 = ORIENTED_EDGE('',*,*,#8735,.T.);-#8735 = EDGE_CURVE('',#8708,#8736,#8738,.T.);-#8736 = VERTEX_POINT('',#8737);-#8737 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#8738 = SURFACE_CURVE('',#8739,(#8743,#8750),.PCURVE_S1.);-#8739 = LINE('',#8740,#8741);-#8740 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#8741 = VECTOR('',#8742,1.);-#8742 = DIRECTION('',(-1.,0.,0.));-#8743 = PCURVE('',#8433,#8744);-#8744 = DEFINITIONAL_REPRESENTATION('',(#8745),#8749);-#8745 = LINE('',#8746,#8747);-#8746 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));-#8747 = VECTOR('',#8748,1.);-#8748 = DIRECTION('',(0.,-1.));-#8749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8750 = PCURVE('',#8751,#8756);-#8751 = PLANE('',#8752);-#8752 = AXIS2_PLACEMENT_3D('',#8753,#8754,#8755);-#8753 = CARTESIAN_POINT('',(3.205,-1.625,0.));-#8754 = DIRECTION('',(-0.,-0.,-1.));-#8755 = DIRECTION('',(-1.,0.,0.));-#8756 = DEFINITIONAL_REPRESENTATION('',(#8757),#8761);-#8757 = LINE('',#8758,#8759);-#8758 = CARTESIAN_POINT('',(0.,-0.15));-#8759 = VECTOR('',#8760,1.);-#8760 = DIRECTION('',(1.,0.));-#8761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8762 = ORIENTED_EDGE('',*,*,#8763,.T.);-#8763 = EDGE_CURVE('',#8736,#8764,#8766,.T.);-#8764 = VERTEX_POINT('',#8765);-#8765 = CARTESIAN_POINT('',(2.2,-1.775,0.445));-#8766 = SURFACE_CURVE('',#8767,(#8771,#8778),.PCURVE_S1.);-#8767 = LINE('',#8768,#8769);-#8768 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#8769 = VECTOR('',#8770,1.);-#8770 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8771 = PCURVE('',#8433,#8772);-#8772 = DEFINITIONAL_REPRESENTATION('',(#8773),#8777);-#8773 = LINE('',#8774,#8775);-#8774 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#8775 = VECTOR('',#8776,1.);-#8776 = DIRECTION('',(0.839949759337,-0.542664170358));-#8777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8778 = PCURVE('',#8779,#8784);-#8779 = PLANE('',#8780);-#8780 = AXIS2_PLACEMENT_3D('',#8781,#8782,#8783);-#8781 = CARTESIAN_POINT('',(2.4875,-1.625,0.));-#8782 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#8783 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8784 = DEFINITIONAL_REPRESENTATION('',(#8785),#8789);-#8785 = LINE('',#8786,#8787);-#8786 = CARTESIAN_POINT('',(0.,-0.15));-#8787 = VECTOR('',#8788,1.);-#8788 = DIRECTION('',(1.,0.));-#8789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8790 = ORIENTED_EDGE('',*,*,#8791,.T.);-#8791 = EDGE_CURVE('',#8764,#8531,#8792,.T.);-#8792 = SURFACE_CURVE('',#8793,(#8797,#8804),.PCURVE_S1.);-#8793 = LINE('',#8794,#8795);-#8794 = CARTESIAN_POINT('',(2.2,-1.775,0.445));-#8795 = VECTOR('',#8796,1.);-#8796 = DIRECTION('',(-1.,0.,0.));-#8797 = PCURVE('',#8433,#8798);-#8798 = DEFINITIONAL_REPRESENTATION('',(#8799),#8803);-#8799 = LINE('',#8800,#8801);-#8800 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#8801 = VECTOR('',#8802,1.);-#8802 = DIRECTION('',(0.,-1.));-#8803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8804 = PCURVE('',#8591,#8805);-#8805 = DEFINITIONAL_REPRESENTATION('',(#8806),#8810);-#8806 = LINE('',#8807,#8808);-#8807 = CARTESIAN_POINT('',(0.,-0.15));-#8808 = VECTOR('',#8809,1.);-#8809 = DIRECTION('',(1.,0.));-#8810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8811 = ORIENTED_EDGE('',*,*,#8530,.T.);-#8812 = ADVANCED_FACE('',(#8813),#8591,.T.);-#8813 = FACE_BOUND('',#8814,.T.);-#8814 = EDGE_LOOP('',(#8815,#8816,#8817,#8840));-#8815 = ORIENTED_EDGE('',*,*,#8791,.T.);-#8816 = ORIENTED_EDGE('',*,*,#8577,.F.);-#8817 = ORIENTED_EDGE('',*,*,#8818,.F.);-#8818 = EDGE_CURVE('',#8819,#8555,#8821,.T.);-#8819 = VERTEX_POINT('',#8820);-#8820 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#8821 = SURFACE_CURVE('',#8822,(#8826,#8833),.PCURVE_S1.);-#8822 = LINE('',#8823,#8824);-#8823 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#8824 = VECTOR('',#8825,1.);-#8825 = DIRECTION('',(-1.,0.,0.));-#8826 = PCURVE('',#8591,#8827);-#8827 = DEFINITIONAL_REPRESENTATION('',(#8828),#8832);-#8828 = LINE('',#8829,#8830);-#8829 = CARTESIAN_POINT('',(0.,0.15));-#8830 = VECTOR('',#8831,1.);-#8831 = DIRECTION('',(1.,0.));-#8832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8833 = PCURVE('',#8489,#8834);-#8834 = DEFINITIONAL_REPRESENTATION('',(#8835),#8839);-#8835 = LINE('',#8836,#8837);-#8836 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#8837 = VECTOR('',#8838,1.);-#8838 = DIRECTION('',(0.,-1.));-#8839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8840 = ORIENTED_EDGE('',*,*,#8841,.T.);-#8841 = EDGE_CURVE('',#8819,#8764,#8842,.T.);-#8842 = SURFACE_CURVE('',#8843,(#8847,#8854),.PCURVE_S1.);-#8843 = LINE('',#8844,#8845);-#8844 = CARTESIAN_POINT('',(2.2,-1.475,0.445));-#8845 = VECTOR('',#8846,1.);-#8846 = DIRECTION('',(0.,-1.,0.));-#8847 = PCURVE('',#8591,#8848);-#8848 = DEFINITIONAL_REPRESENTATION('',(#8849),#8853);-#8849 = LINE('',#8850,#8851);-#8850 = CARTESIAN_POINT('',(0.,0.15));-#8851 = VECTOR('',#8852,1.);-#8852 = DIRECTION('',(0.,-1.));-#8853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8854 = PCURVE('',#8779,#8855);-#8855 = DEFINITIONAL_REPRESENTATION('',(#8856),#8860);-#8856 = LINE('',#8857,#8858);-#8857 = CARTESIAN_POINT('',(0.529793591883,0.15));-#8858 = VECTOR('',#8859,1.);-#8859 = DIRECTION('',(0.,-1.));-#8860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8861 = ADVANCED_FACE('',(#8862),#8646,.T.);-#8862 = FACE_BOUND('',#8863,.T.);-#8863 = EDGE_LOOP('',(#8864,#8865,#8866,#8889));-#8864 = ORIENTED_EDGE('',*,*,#8630,.F.);-#8865 = ORIENTED_EDGE('',*,*,#8684,.T.);-#8866 = ORIENTED_EDGE('',*,*,#8867,.T.);-#8867 = EDGE_CURVE('',#8685,#8868,#8870,.T.);-#8868 = VERTEX_POINT('',#8869);-#8869 = CARTESIAN_POINT('',(3.205,-1.475,0.15));-#8870 = SURFACE_CURVE('',#8871,(#8875,#8882),.PCURVE_S1.);-#8871 = LINE('',#8872,#8873);-#8872 = CARTESIAN_POINT('',(3.205,-1.775,0.15));-#8873 = VECTOR('',#8874,1.);-#8874 = DIRECTION('',(0.,1.,0.));-#8875 = PCURVE('',#8646,#8876);-#8876 = DEFINITIONAL_REPRESENTATION('',(#8877),#8881);-#8877 = LINE('',#8878,#8879);-#8878 = CARTESIAN_POINT('',(0.5675,-0.15));-#8879 = VECTOR('',#8880,1.);-#8880 = DIRECTION('',(0.,1.));-#8881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8882 = PCURVE('',#8723,#8883);-#8883 = DEFINITIONAL_REPRESENTATION('',(#8884),#8888);-#8884 = LINE('',#8885,#8886);-#8885 = CARTESIAN_POINT('',(0.,-0.15));-#8886 = VECTOR('',#8887,1.);-#8887 = DIRECTION('',(0.,1.));-#8888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8889 = ORIENTED_EDGE('',*,*,#8890,.F.);-#8890 = EDGE_CURVE('',#8631,#8868,#8891,.T.);-#8891 = SURFACE_CURVE('',#8892,(#8896,#8903),.PCURVE_S1.);-#8892 = LINE('',#8893,#8894);-#8893 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));-#8894 = VECTOR('',#8895,1.);-#8895 = DIRECTION('',(1.,0.,0.));-#8896 = PCURVE('',#8646,#8897);-#8897 = DEFINITIONAL_REPRESENTATION('',(#8898),#8902);-#8898 = LINE('',#8899,#8900);-#8899 = CARTESIAN_POINT('',(0.,0.15));-#8900 = VECTOR('',#8901,1.);-#8901 = DIRECTION('',(1.,0.));-#8902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8903 = PCURVE('',#8489,#8904);-#8904 = DEFINITIONAL_REPRESENTATION('',(#8905),#8909);-#8905 = LINE('',#8906,#8907);-#8906 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));-#8907 = VECTOR('',#8908,1.);-#8908 = DIRECTION('',(0.,1.));-#8909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8910 = ADVANCED_FACE('',(#8911),#8489,.T.);-#8911 = FACE_BOUND('',#8912,.T.);-#8912 = EDGE_LOOP('',(#8913,#8914,#8915,#8916,#8939,#8962,#8983,#8984));-#8913 = ORIENTED_EDGE('',*,*,#8473,.T.);-#8914 = ORIENTED_EDGE('',*,*,#8658,.T.);-#8915 = ORIENTED_EDGE('',*,*,#8890,.T.);-#8916 = ORIENTED_EDGE('',*,*,#8917,.T.);-#8917 = EDGE_CURVE('',#8868,#8918,#8920,.T.);-#8918 = VERTEX_POINT('',#8919);-#8919 = CARTESIAN_POINT('',(3.205,-1.475,0.));-#8920 = SURFACE_CURVE('',#8921,(#8925,#8932),.PCURVE_S1.);-#8921 = LINE('',#8922,#8923);-#8922 = CARTESIAN_POINT('',(3.205,-1.475,0.15));-#8923 = VECTOR('',#8924,1.);-#8924 = DIRECTION('',(0.,0.,-1.));-#8925 = PCURVE('',#8489,#8926);-#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931);-#8927 = LINE('',#8928,#8929);-#8928 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#8929 = VECTOR('',#8930,1.);-#8930 = DIRECTION('',(-1.,0.));-#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8932 = PCURVE('',#8723,#8933);-#8933 = DEFINITIONAL_REPRESENTATION('',(#8934),#8938);-#8934 = LINE('',#8935,#8936);-#8935 = CARTESIAN_POINT('',(0.,0.15));-#8936 = VECTOR('',#8937,1.);-#8937 = DIRECTION('',(1.,0.));-#8938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8939 = ORIENTED_EDGE('',*,*,#8940,.T.);-#8940 = EDGE_CURVE('',#8918,#8941,#8943,.T.);-#8941 = VERTEX_POINT('',#8942);-#8942 = CARTESIAN_POINT('',(2.4875,-1.475,0.));-#8943 = SURFACE_CURVE('',#8944,(#8948,#8955),.PCURVE_S1.);-#8944 = LINE('',#8945,#8946);-#8945 = CARTESIAN_POINT('',(3.205,-1.475,0.));-#8946 = VECTOR('',#8947,1.);-#8947 = DIRECTION('',(-1.,0.,0.));-#8948 = PCURVE('',#8489,#8949);+#8699 = PCURVE('',#8700,#8705);+#8700 = PLANE('',#8701);+#8701 = AXIS2_PLACEMENT_3D('',#8702,#8703,#8704);+#8702 = CARTESIAN_POINT('',(3.205,-1.625,0.));+#8703 = DIRECTION('',(-0.,-0.,-1.));+#8704 = DIRECTION('',(-1.,0.,0.));+#8705 = DEFINITIONAL_REPRESENTATION('',(#8706),#8710);+#8706 = LINE('',#8707,#8708);+#8707 = CARTESIAN_POINT('',(0.7175,-0.15));+#8708 = VECTOR('',#8709,1.);+#8709 = DIRECTION('',(0.,1.));+#8710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8711 = ORIENTED_EDGE('',*,*,#8712,.T.);+#8712 = EDGE_CURVE('',#8683,#8607,#8713,.T.);+#8713 = SURFACE_CURVE('',#8714,(#8718,#8725),.PCURVE_S1.);+#8714 = LINE('',#8715,#8716);+#8715 = CARTESIAN_POINT('',(2.4875,-1.775,0.));+#8716 = VECTOR('',#8717,1.);+#8717 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8718 = PCURVE('',#8667,#8719);+#8719 = DEFINITIONAL_REPRESENTATION('',(#8720),#8724);+#8720 = LINE('',#8721,#8722);+#8721 = CARTESIAN_POINT('',(0.,-0.15));+#8722 = VECTOR('',#8723,1.);+#8723 = DIRECTION('',(1.,0.));+#8724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8725 = PCURVE('',#8433,#8726);+#8726 = DEFINITIONAL_REPRESENTATION('',(#8727),#8731);+#8727 = LINE('',#8728,#8729);+#8728 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8729 = VECTOR('',#8730,1.);+#8730 = DIRECTION('',(0.839949759337,-0.542664170358));+#8731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8732 = ORIENTED_EDGE('',*,*,#8653,.F.);+#8733 = ORIENTED_EDGE('',*,*,#8734,.F.);+#8734 = EDGE_CURVE('',#8685,#8631,#8735,.T.);+#8735 = SURFACE_CURVE('',#8736,(#8740,#8747),.PCURVE_S1.);+#8736 = LINE('',#8737,#8738);+#8737 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#8738 = VECTOR('',#8739,1.);+#8739 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#8740 = PCURVE('',#8667,#8741);+#8741 = DEFINITIONAL_REPRESENTATION('',(#8742),#8746);+#8742 = LINE('',#8743,#8744);+#8743 = CARTESIAN_POINT('',(0.,0.15));+#8744 = VECTOR('',#8745,1.);+#8745 = DIRECTION('',(1.,0.));+#8746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8747 = PCURVE('',#8489,#8748);+#8748 = DEFINITIONAL_REPRESENTATION('',(#8749),#8753);+#8749 = LINE('',#8750,#8751);+#8750 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#8751 = VECTOR('',#8752,1.);+#8752 = DIRECTION('',(0.839949759337,-0.542664170358));+#8753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8754 = ADVANCED_FACE('',(#8755),#8700,.T.);+#8755 = FACE_BOUND('',#8756,.T.);+#8756 = EDGE_LOOP('',(#8757,#8787,#8808,#8809));+#8757 = ORIENTED_EDGE('',*,*,#8758,.F.);+#8758 = EDGE_CURVE('',#8759,#8761,#8763,.T.);+#8759 = VERTEX_POINT('',#8760);+#8760 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8761 = VERTEX_POINT('',#8762);+#8762 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#8763 = SURFACE_CURVE('',#8764,(#8768,#8775),.PCURVE_S1.);+#8764 = LINE('',#8765,#8766);+#8765 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8766 = VECTOR('',#8767,1.);+#8767 = DIRECTION('',(0.,1.,0.));+#8768 = PCURVE('',#8700,#8769);+#8769 = DEFINITIONAL_REPRESENTATION('',(#8770),#8774);+#8770 = LINE('',#8771,#8772);+#8771 = CARTESIAN_POINT('',(0.,-0.15));+#8772 = VECTOR('',#8773,1.);+#8773 = DIRECTION('',(0.,1.));+#8774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8775 = PCURVE('',#8776,#8781);+#8776 = PLANE('',#8777);+#8777 = AXIS2_PLACEMENT_3D('',#8778,#8779,#8780);+#8778 = CARTESIAN_POINT('',(3.205,-1.625,0.15));+#8779 = DIRECTION('',(1.,0.,0.));+#8780 = DIRECTION('',(0.,0.,-1.));+#8781 = DEFINITIONAL_REPRESENTATION('',(#8782),#8786);+#8782 = LINE('',#8783,#8784);+#8783 = CARTESIAN_POINT('',(0.15,-0.15));+#8784 = VECTOR('',#8785,1.);+#8785 = DIRECTION('',(0.,1.));+#8786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8787 = ORIENTED_EDGE('',*,*,#8788,.T.);+#8788 = EDGE_CURVE('',#8759,#8683,#8789,.T.);+#8789 = SURFACE_CURVE('',#8790,(#8794,#8801),.PCURVE_S1.);+#8790 = LINE('',#8791,#8792);+#8791 = CARTESIAN_POINT('',(3.205,-1.775,0.));+#8792 = VECTOR('',#8793,1.);+#8793 = DIRECTION('',(-1.,0.,0.));+#8794 = PCURVE('',#8700,#8795);+#8795 = DEFINITIONAL_REPRESENTATION('',(#8796),#8800);+#8796 = LINE('',#8797,#8798);+#8797 = CARTESIAN_POINT('',(0.,-0.15));+#8798 = VECTOR('',#8799,1.);+#8799 = DIRECTION('',(1.,0.));+#8800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8801 = PCURVE('',#8433,#8802);+#8802 = DEFINITIONAL_REPRESENTATION('',(#8803),#8807);+#8803 = LINE('',#8804,#8805);+#8804 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8805 = VECTOR('',#8806,1.);+#8806 = DIRECTION('',(0.,-1.));+#8807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8808 = ORIENTED_EDGE('',*,*,#8682,.T.);+#8809 = ORIENTED_EDGE('',*,*,#8810,.F.);+#8810 = EDGE_CURVE('',#8761,#8685,#8811,.T.);+#8811 = SURFACE_CURVE('',#8812,(#8816,#8823),.PCURVE_S1.);+#8812 = LINE('',#8813,#8814);+#8813 = CARTESIAN_POINT('',(3.205,-1.475,0.));+#8814 = VECTOR('',#8815,1.);+#8815 = DIRECTION('',(-1.,0.,0.));+#8816 = PCURVE('',#8700,#8817);+#8817 = DEFINITIONAL_REPRESENTATION('',(#8818),#8822);+#8818 = LINE('',#8819,#8820);+#8819 = CARTESIAN_POINT('',(0.,0.15));+#8820 = VECTOR('',#8821,1.);+#8821 = DIRECTION('',(1.,0.));+#8822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8823 = PCURVE('',#8489,#8824);+#8824 = DEFINITIONAL_REPRESENTATION('',(#8825),#8829);+#8825 = LINE('',#8826,#8827);+#8826 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8827 = VECTOR('',#8828,1.);+#8828 = DIRECTION('',(0.,-1.));+#8829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8830 = ADVANCED_FACE('',(#8831),#8776,.T.);+#8831 = FACE_BOUND('',#8832,.T.);+#8832 = EDGE_LOOP('',(#8833,#8863,#8884,#8885));+#8833 = ORIENTED_EDGE('',*,*,#8834,.F.);+#8834 = EDGE_CURVE('',#8835,#8837,#8839,.T.);+#8835 = VERTEX_POINT('',#8836);+#8836 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8837 = VERTEX_POINT('',#8838);+#8838 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#8839 = SURFACE_CURVE('',#8840,(#8844,#8851),.PCURVE_S1.);+#8840 = LINE('',#8841,#8842);+#8841 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8842 = VECTOR('',#8843,1.);+#8843 = DIRECTION('',(0.,1.,0.));+#8844 = PCURVE('',#8776,#8845);+#8845 = DEFINITIONAL_REPRESENTATION('',(#8846),#8850);+#8846 = LINE('',#8847,#8848);+#8847 = CARTESIAN_POINT('',(0.,-0.15));+#8848 = VECTOR('',#8849,1.);+#8849 = DIRECTION('',(0.,1.));+#8850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8851 = PCURVE('',#8852,#8857);+#8852 = PLANE('',#8853);+#8853 = AXIS2_PLACEMENT_3D('',#8854,#8855,#8856);+#8854 = CARTESIAN_POINT('',(2.6375,-1.625,0.15));+#8855 = DIRECTION('',(-0.,0.,1.));+#8856 = DIRECTION('',(1.,0.,0.));+#8857 = DEFINITIONAL_REPRESENTATION('',(#8858),#8862);+#8858 = LINE('',#8859,#8860);+#8859 = CARTESIAN_POINT('',(0.5675,-0.15));+#8860 = VECTOR('',#8861,1.);+#8861 = DIRECTION('',(0.,1.));+#8862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8863 = ORIENTED_EDGE('',*,*,#8864,.T.);+#8864 = EDGE_CURVE('',#8835,#8759,#8865,.T.);+#8865 = SURFACE_CURVE('',#8866,(#8870,#8877),.PCURVE_S1.);+#8866 = LINE('',#8867,#8868);+#8867 = CARTESIAN_POINT('',(3.205,-1.775,0.15));+#8868 = VECTOR('',#8869,1.);+#8869 = DIRECTION('',(0.,0.,-1.));+#8870 = PCURVE('',#8776,#8871);+#8871 = DEFINITIONAL_REPRESENTATION('',(#8872),#8876);+#8872 = LINE('',#8873,#8874);+#8873 = CARTESIAN_POINT('',(0.,-0.15));+#8874 = VECTOR('',#8875,1.);+#8875 = DIRECTION('',(1.,0.));+#8876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8877 = PCURVE('',#8433,#8878);+#8878 = DEFINITIONAL_REPRESENTATION('',(#8879),#8883);+#8879 = LINE('',#8880,#8881);+#8880 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8881 = VECTOR('',#8882,1.);+#8882 = DIRECTION('',(-1.,0.));+#8883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8884 = ORIENTED_EDGE('',*,*,#8758,.T.);+#8885 = ORIENTED_EDGE('',*,*,#8886,.F.);+#8886 = EDGE_CURVE('',#8837,#8761,#8887,.T.);+#8887 = SURFACE_CURVE('',#8888,(#8892,#8899),.PCURVE_S1.);+#8888 = LINE('',#8889,#8890);+#8889 = CARTESIAN_POINT('',(3.205,-1.475,0.15));+#8890 = VECTOR('',#8891,1.);+#8891 = DIRECTION('',(0.,0.,-1.));+#8892 = PCURVE('',#8776,#8893);+#8893 = DEFINITIONAL_REPRESENTATION('',(#8894),#8898);+#8894 = LINE('',#8895,#8896);+#8895 = CARTESIAN_POINT('',(0.,0.15));+#8896 = VECTOR('',#8897,1.);+#8897 = DIRECTION('',(1.,0.));+#8898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8899 = PCURVE('',#8489,#8900);+#8900 = DEFINITIONAL_REPRESENTATION('',(#8901),#8905);+#8901 = LINE('',#8902,#8903);+#8902 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#8903 = VECTOR('',#8904,1.);+#8904 = DIRECTION('',(-1.,0.));+#8905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8906 = ADVANCED_FACE('',(#8907),#8852,.T.);+#8907 = FACE_BOUND('',#8908,.T.);+#8908 = EDGE_LOOP('',(#8909,#8934,#8955,#8956));+#8909 = ORIENTED_EDGE('',*,*,#8910,.F.);+#8910 = EDGE_CURVE('',#8911,#8913,#8915,.T.);+#8911 = VERTEX_POINT('',#8912);+#8912 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8913 = VERTEX_POINT('',#8914);+#8914 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#8915 = SURFACE_CURVE('',#8916,(#8920,#8927),.PCURVE_S1.);+#8916 = LINE('',#8917,#8918);+#8917 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8918 = VECTOR('',#8919,1.);+#8919 = DIRECTION('',(0.,1.,0.));+#8920 = PCURVE('',#8852,#8921);+#8921 = DEFINITIONAL_REPRESENTATION('',(#8922),#8926);+#8922 = LINE('',#8923,#8924);+#8923 = CARTESIAN_POINT('',(0.,-0.15));+#8924 = VECTOR('',#8925,1.);+#8925 = DIRECTION('',(0.,1.));+#8926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8927 = PCURVE('',#8461,#8928);+#8928 = DEFINITIONAL_REPRESENTATION('',(#8929),#8933);+#8929 = LINE('',#8930,#8931);+#8930 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#8931 = VECTOR('',#8932,1.);+#8932 = DIRECTION('',(0.,1.));+#8933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8934 = ORIENTED_EDGE('',*,*,#8935,.T.);+#8935 = EDGE_CURVE('',#8911,#8835,#8936,.T.);+#8936 = SURFACE_CURVE('',#8937,(#8941,#8948),.PCURVE_S1.);+#8937 = LINE('',#8938,#8939);+#8938 = CARTESIAN_POINT('',(2.6375,-1.775,0.15));+#8939 = VECTOR('',#8940,1.);+#8940 = DIRECTION('',(1.,0.,0.));+#8941 = PCURVE('',#8852,#8942);+#8942 = DEFINITIONAL_REPRESENTATION('',(#8943),#8947);+#8943 = LINE('',#8944,#8945);+#8944 = CARTESIAN_POINT('',(0.,-0.15));+#8945 = VECTOR('',#8946,1.);+#8946 = DIRECTION('',(1.,0.));+#8947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8948 = PCURVE('',#8433,#8949); #8949 = DEFINITIONAL_REPRESENTATION('',(#8950),#8954); #8950 = LINE('',#8951,#8952);-#8951 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#8951 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03)); #8952 = VECTOR('',#8953,1.);-#8953 = DIRECTION('',(0.,-1.));+#8953 = DIRECTION('',(0.,1.)); #8954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8955 = PCURVE('',#8751,#8956);-#8956 = DEFINITIONAL_REPRESENTATION('',(#8957),#8961);-#8957 = LINE('',#8958,#8959);-#8958 = CARTESIAN_POINT('',(0.,0.15));-#8959 = VECTOR('',#8960,1.);-#8960 = DIRECTION('',(1.,0.));-#8961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8962 = ORIENTED_EDGE('',*,*,#8963,.T.);-#8963 = EDGE_CURVE('',#8941,#8819,#8964,.T.);-#8964 = SURFACE_CURVE('',#8965,(#8969,#8976),.PCURVE_S1.);+#8955 = ORIENTED_EDGE('',*,*,#8834,.T.);+#8956 = ORIENTED_EDGE('',*,*,#8957,.F.);+#8957 = EDGE_CURVE('',#8913,#8837,#8958,.T.);+#8958 = SURFACE_CURVE('',#8959,(#8963,#8970),.PCURVE_S1.);+#8959 = LINE('',#8960,#8961);+#8960 = CARTESIAN_POINT('',(2.6375,-1.475,0.15));+#8961 = VECTOR('',#8962,1.);+#8962 = DIRECTION('',(1.,0.,0.));+#8963 = PCURVE('',#8852,#8964);+#8964 = DEFINITIONAL_REPRESENTATION('',(#8965),#8969); #8965 = LINE('',#8966,#8967);-#8966 = CARTESIAN_POINT('',(2.4875,-1.475,0.));+#8966 = CARTESIAN_POINT('',(0.,0.15)); #8967 = VECTOR('',#8968,1.);-#8968 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#8969 = PCURVE('',#8489,#8970);-#8970 = DEFINITIONAL_REPRESENTATION('',(#8971),#8975);-#8971 = LINE('',#8972,#8973);-#8972 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#8973 = VECTOR('',#8974,1.);-#8974 = DIRECTION('',(0.839949759337,-0.542664170358));-#8975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8976 = PCURVE('',#8779,#8977);-#8977 = DEFINITIONAL_REPRESENTATION('',(#8978),#8982);-#8978 = LINE('',#8979,#8980);-#8979 = CARTESIAN_POINT('',(0.,0.15));-#8980 = VECTOR('',#8981,1.);-#8981 = DIRECTION('',(1.,0.));-#8982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8983 = ORIENTED_EDGE('',*,*,#8818,.T.);-#8984 = ORIENTED_EDGE('',*,*,#8554,.T.);-#8985 = ADVANCED_FACE('',(#8986),#8723,.T.);-#8986 = FACE_BOUND('',#8987,.T.);-#8987 = EDGE_LOOP('',(#8988,#8989,#8990,#9011));-#8988 = ORIENTED_EDGE('',*,*,#8867,.F.);-#8989 = ORIENTED_EDGE('',*,*,#8707,.T.);-#8990 = ORIENTED_EDGE('',*,*,#8991,.T.);-#8991 = EDGE_CURVE('',#8708,#8918,#8992,.T.);-#8992 = SURFACE_CURVE('',#8993,(#8997,#9004),.PCURVE_S1.);-#8993 = LINE('',#8994,#8995);-#8994 = CARTESIAN_POINT('',(3.205,-1.775,0.));-#8995 = VECTOR('',#8996,1.);-#8996 = DIRECTION('',(0.,1.,0.));-#8997 = PCURVE('',#8723,#8998);-#8998 = DEFINITIONAL_REPRESENTATION('',(#8999),#9003);-#8999 = LINE('',#9000,#9001);-#9000 = CARTESIAN_POINT('',(0.15,-0.15));-#9001 = VECTOR('',#9002,1.);-#9002 = DIRECTION('',(0.,1.));-#9003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9004 = PCURVE('',#8751,#9005);-#9005 = DEFINITIONAL_REPRESENTATION('',(#9006),#9010);-#9006 = LINE('',#9007,#9008);-#9007 = CARTESIAN_POINT('',(0.,-0.15));-#9008 = VECTOR('',#9009,1.);-#9009 = DIRECTION('',(0.,1.));-#9010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9011 = ORIENTED_EDGE('',*,*,#8917,.F.);-#9012 = ADVANCED_FACE('',(#9013),#8751,.T.);-#9013 = FACE_BOUND('',#9014,.T.);-#9014 = EDGE_LOOP('',(#9015,#9016,#9017,#9038));-#9015 = ORIENTED_EDGE('',*,*,#8991,.F.);-#9016 = ORIENTED_EDGE('',*,*,#8735,.T.);-#9017 = ORIENTED_EDGE('',*,*,#9018,.T.);-#9018 = EDGE_CURVE('',#8736,#8941,#9019,.T.);-#9019 = SURFACE_CURVE('',#9020,(#9024,#9031),.PCURVE_S1.);-#9020 = LINE('',#9021,#9022);-#9021 = CARTESIAN_POINT('',(2.4875,-1.775,0.));-#9022 = VECTOR('',#9023,1.);-#9023 = DIRECTION('',(0.,1.,0.));-#9024 = PCURVE('',#8751,#9025);-#9025 = DEFINITIONAL_REPRESENTATION('',(#9026),#9030);-#9026 = LINE('',#9027,#9028);-#9027 = CARTESIAN_POINT('',(0.7175,-0.15));-#9028 = VECTOR('',#9029,1.);-#9029 = DIRECTION('',(0.,1.));-#9030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9031 = PCURVE('',#8779,#9032);-#9032 = DEFINITIONAL_REPRESENTATION('',(#9033),#9037);-#9033 = LINE('',#9034,#9035);-#9034 = CARTESIAN_POINT('',(0.,-0.15));-#9035 = VECTOR('',#9036,1.);-#9036 = DIRECTION('',(0.,1.));-#9037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9038 = ORIENTED_EDGE('',*,*,#8940,.F.);-#9039 = ADVANCED_FACE('',(#9040),#8779,.T.);-#9040 = FACE_BOUND('',#9041,.T.);-#9041 = EDGE_LOOP('',(#9042,#9043,#9044,#9045));-#9042 = ORIENTED_EDGE('',*,*,#9018,.F.);-#9043 = ORIENTED_EDGE('',*,*,#8763,.T.);-#9044 = ORIENTED_EDGE('',*,*,#8841,.F.);-#9045 = ORIENTED_EDGE('',*,*,#8963,.F.);+#8968 = DIRECTION('',(1.,0.));+#8969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8970 = PCURVE('',#8489,#8971);+#8971 = DEFINITIONAL_REPRESENTATION('',(#8972),#8976);+#8972 = LINE('',#8973,#8974);+#8973 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#8974 = VECTOR('',#8975,1.);+#8975 = DIRECTION('',(0.,1.));+#8976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8977 = ADVANCED_FACE('',(#8978),#8489,.T.);+#8978 = FACE_BOUND('',#8979,.T.);+#8979 = EDGE_LOOP('',(#8980,#8981,#9002,#9003,#9004,#9005,#9006,#9007));+#8980 = ORIENTED_EDGE('',*,*,#8473,.T.);+#8981 = ORIENTED_EDGE('',*,*,#8982,.T.);+#8982 = EDGE_CURVE('',#8446,#8913,#8983,.T.);+#8983 = SURFACE_CURVE('',#8984,(#8988,#8995),.PCURVE_S1.);+#8984 = LINE('',#8985,#8986);+#8985 = CARTESIAN_POINT('',(2.35,-1.475,0.595));+#8986 = VECTOR('',#8987,1.);+#8987 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#8988 = PCURVE('',#8489,#8989);+#8989 = DEFINITIONAL_REPRESENTATION('',(#8990),#8994);+#8990 = LINE('',#8991,#8992);+#8991 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#8992 = VECTOR('',#8993,1.);+#8993 = DIRECTION('',(-0.839949759337,0.542664170358));+#8994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8995 = PCURVE('',#8461,#8996);+#8996 = DEFINITIONAL_REPRESENTATION('',(#8997),#9001);+#8997 = LINE('',#8998,#8999);+#8998 = CARTESIAN_POINT('',(0.,0.15));+#8999 = VECTOR('',#9000,1.);+#9000 = DIRECTION('',(1.,0.));+#9001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9002 = ORIENTED_EDGE('',*,*,#8957,.T.);+#9003 = ORIENTED_EDGE('',*,*,#8886,.T.);+#9004 = ORIENTED_EDGE('',*,*,#8810,.T.);+#9005 = ORIENTED_EDGE('',*,*,#8734,.T.);+#9006 = ORIENTED_EDGE('',*,*,#8630,.T.);+#9007 = ORIENTED_EDGE('',*,*,#8554,.T.);+#9008 = ADVANCED_FACE('',(#9009),#8461,.T.);+#9009 = FACE_BOUND('',#9010,.T.);+#9010 = EDGE_LOOP('',(#9011,#9012,#9033,#9034));+#9011 = ORIENTED_EDGE('',*,*,#8445,.F.);+#9012 = ORIENTED_EDGE('',*,*,#9013,.T.);+#9013 = EDGE_CURVE('',#8413,#8911,#9014,.T.);+#9014 = SURFACE_CURVE('',#9015,(#9019,#9026),.PCURVE_S1.);+#9015 = LINE('',#9016,#9017);+#9016 = CARTESIAN_POINT('',(2.35,-1.775,0.595));+#9017 = VECTOR('',#9018,1.);+#9018 = DIRECTION('',(0.542664170358,0.,-0.839949759337));+#9019 = PCURVE('',#8461,#9020);+#9020 = DEFINITIONAL_REPRESENTATION('',(#9021),#9025);+#9021 = LINE('',#9022,#9023);+#9022 = CARTESIAN_POINT('',(0.,-0.15));+#9023 = VECTOR('',#9024,1.);+#9024 = DIRECTION('',(1.,0.));+#9025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9026 = PCURVE('',#8433,#9027);+#9027 = DEFINITIONAL_REPRESENTATION('',(#9028),#9032);+#9028 = LINE('',#9029,#9030);+#9029 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#9030 = VECTOR('',#9031,1.);+#9031 = DIRECTION('',(-0.839949759337,0.542664170358));+#9032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9033 = ORIENTED_EDGE('',*,*,#8910,.T.);+#9034 = ORIENTED_EDGE('',*,*,#8982,.F.);+#9035 = ADVANCED_FACE('',(#9036),#8433,.F.);+#9036 = FACE_BOUND('',#9037,.F.);+#9037 = EDGE_LOOP('',(#9038,#9039,#9040,#9041,#9042,#9043,#9044,#9045));+#9038 = ORIENTED_EDGE('',*,*,#8410,.T.);+#9039 = ORIENTED_EDGE('',*,*,#9013,.T.);+#9040 = ORIENTED_EDGE('',*,*,#8935,.T.);+#9041 = ORIENTED_EDGE('',*,*,#8864,.T.);+#9042 = ORIENTED_EDGE('',*,*,#8788,.T.);+#9043 = ORIENTED_EDGE('',*,*,#8712,.T.);+#9044 = ORIENTED_EDGE('',*,*,#8606,.T.);+#9045 = ORIENTED_EDGE('',*,*,#8530,.T.); #9046 = MANIFOLD_SOLID_BREP('',#9047);-#9047 = CLOSED_SHELL('',(#9048,#9168,#9244,#9320,#9454,#9503,#9552,#9627- ,#9654,#9681));+#9047 = CLOSED_SHELL('',(#9048,#9168,#9244,#9320,#9396,#9472,#9548,#9619+ ,#9650,#9677)); #9048 = ADVANCED_FACE('',(#9049),#9063,.T.); #9049 = FACE_BOUND('',#9050,.T.); #9050 = EDGE_LOOP('',(#9051,#9086,#9114,#9142));@@ -10656,521 +10656,521 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #9243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9244 = ADVANCED_FACE('',(#9245),#9103,.T.);+#9244 = ADVANCED_FACE('',(#9245),#9233,.T.); #9245 = FACE_BOUND('',#9246,.T.);-#9246 = EDGE_LOOP('',(#9247,#9248,#9271,#9299));-#9247 = ORIENTED_EDGE('',*,*,#9087,.F.);-#9248 = ORIENTED_EDGE('',*,*,#9249,.T.);-#9249 = EDGE_CURVE('',#9055,#9250,#9252,.T.);-#9250 = VERTEX_POINT('',#9251);-#9251 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));-#9252 = SURFACE_CURVE('',#9253,(#9257,#9264),.PCURVE_S1.);-#9253 = LINE('',#9254,#9255);-#9254 = CARTESIAN_POINT('',(2.35,-1.125,0.595));-#9255 = VECTOR('',#9256,1.);-#9256 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#9257 = PCURVE('',#9103,#9258);-#9258 = DEFINITIONAL_REPRESENTATION('',(#9259),#9263);-#9259 = LINE('',#9260,#9261);-#9260 = CARTESIAN_POINT('',(0.,-0.15));-#9261 = VECTOR('',#9262,1.);-#9262 = DIRECTION('',(1.,0.));-#9263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9264 = PCURVE('',#9075,#9265);-#9265 = DEFINITIONAL_REPRESENTATION('',(#9266),#9270);-#9266 = LINE('',#9267,#9268);-#9267 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));-#9268 = VECTOR('',#9269,1.);-#9269 = DIRECTION('',(-0.839949759337,0.542664170358));-#9270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9271 = ORIENTED_EDGE('',*,*,#9272,.T.);-#9272 = EDGE_CURVE('',#9250,#9273,#9275,.T.);+#9246 = EDGE_LOOP('',(#9247,#9270,#9271,#9294));+#9247 = ORIENTED_EDGE('',*,*,#9248,.T.);+#9248 = EDGE_CURVE('',#9249,#9173,#9251,.T.);+#9249 = VERTEX_POINT('',#9250);+#9250 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#9251 = SURFACE_CURVE('',#9252,(#9256,#9263),.PCURVE_S1.);+#9252 = LINE('',#9253,#9254);+#9253 = CARTESIAN_POINT('',(2.2,-1.125,0.445));+#9254 = VECTOR('',#9255,1.);+#9255 = DIRECTION('',(-1.,0.,0.));+#9256 = PCURVE('',#9233,#9257);+#9257 = DEFINITIONAL_REPRESENTATION('',(#9258),#9262);+#9258 = LINE('',#9259,#9260);+#9259 = CARTESIAN_POINT('',(0.,-0.15));+#9260 = VECTOR('',#9261,1.);+#9261 = DIRECTION('',(1.,0.));+#9262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9263 = PCURVE('',#9075,#9264);+#9264 = DEFINITIONAL_REPRESENTATION('',(#9265),#9269);+#9265 = LINE('',#9266,#9267);+#9266 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9267 = VECTOR('',#9268,1.);+#9268 = DIRECTION('',(0.,-1.));+#9269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9270 = ORIENTED_EDGE('',*,*,#9219,.F.);+#9271 = ORIENTED_EDGE('',*,*,#9272,.F.);+#9272 = EDGE_CURVE('',#9273,#9197,#9275,.T.); #9273 = VERTEX_POINT('',#9274);-#9274 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#9274 = CARTESIAN_POINT('',(2.2,-0.825,0.445)); #9275 = SURFACE_CURVE('',#9276,(#9280,#9287),.PCURVE_S1.); #9276 = LINE('',#9277,#9278);-#9277 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9277 = CARTESIAN_POINT('',(2.2,-0.825,0.445)); #9278 = VECTOR('',#9279,1.);-#9279 = DIRECTION('',(0.,1.,0.));-#9280 = PCURVE('',#9103,#9281);+#9279 = DIRECTION('',(-1.,0.,0.));+#9280 = PCURVE('',#9233,#9281); #9281 = DEFINITIONAL_REPRESENTATION('',(#9282),#9286); #9282 = LINE('',#9283,#9284);-#9283 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#9283 = CARTESIAN_POINT('',(0.,0.15)); #9284 = VECTOR('',#9285,1.);-#9285 = DIRECTION('',(0.,1.));+#9285 = DIRECTION('',(1.,0.)); #9286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9287 = PCURVE('',#9288,#9293);-#9288 = PLANE('',#9289);-#9289 = AXIS2_PLACEMENT_3D('',#9290,#9291,#9292);-#9290 = CARTESIAN_POINT('',(2.6375,-0.975,0.15));-#9291 = DIRECTION('',(-0.,0.,1.));-#9292 = DIRECTION('',(1.,0.,0.));-#9293 = DEFINITIONAL_REPRESENTATION('',(#9294),#9298);-#9294 = LINE('',#9295,#9296);-#9295 = CARTESIAN_POINT('',(0.,-0.15));-#9296 = VECTOR('',#9297,1.);-#9297 = DIRECTION('',(0.,1.));-#9298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9299 = ORIENTED_EDGE('',*,*,#9300,.F.);-#9300 = EDGE_CURVE('',#9088,#9273,#9301,.T.);-#9301 = SURFACE_CURVE('',#9302,(#9306,#9313),.PCURVE_S1.);-#9302 = LINE('',#9303,#9304);-#9303 = CARTESIAN_POINT('',(2.35,-0.825,0.595));-#9304 = VECTOR('',#9305,1.);-#9305 = DIRECTION('',(0.542664170358,0.,-0.839949759337));-#9306 = PCURVE('',#9103,#9307);-#9307 = DEFINITIONAL_REPRESENTATION('',(#9308),#9312);-#9308 = LINE('',#9309,#9310);-#9309 = CARTESIAN_POINT('',(0.,0.15));-#9310 = VECTOR('',#9311,1.);-#9311 = DIRECTION('',(1.,0.));-#9312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9313 = PCURVE('',#9131,#9314);+#9287 = PCURVE('',#9131,#9288);+#9288 = DEFINITIONAL_REPRESENTATION('',(#9289),#9293);+#9289 = LINE('',#9290,#9291);+#9290 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));+#9291 = VECTOR('',#9292,1.);+#9292 = DIRECTION('',(0.,-1.));+#9293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9294 = ORIENTED_EDGE('',*,*,#9295,.T.);+#9295 = EDGE_CURVE('',#9273,#9249,#9296,.T.);+#9296 = SURFACE_CURVE('',#9297,(#9301,#9308),.PCURVE_S1.);+#9297 = LINE('',#9298,#9299);+#9298 = CARTESIAN_POINT('',(2.2,-0.825,0.445));+#9299 = VECTOR('',#9300,1.);+#9300 = DIRECTION('',(0.,-1.,0.));+#9301 = PCURVE('',#9233,#9302);+#9302 = DEFINITIONAL_REPRESENTATION('',(#9303),#9307);+#9303 = LINE('',#9304,#9305);+#9304 = CARTESIAN_POINT('',(0.,0.15));+#9305 = VECTOR('',#9306,1.);+#9306 = DIRECTION('',(0.,-1.));+#9307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9308 = PCURVE('',#9309,#9314);+#9309 = PLANE('',#9310);+#9310 = AXIS2_PLACEMENT_3D('',#9311,#9312,#9313);+#9311 = CARTESIAN_POINT('',(2.4875,-0.975,0.));+#9312 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));+#9313 = DIRECTION('',(-0.542664170358,0.,0.839949759337)); #9314 = DEFINITIONAL_REPRESENTATION('',(#9315),#9319); #9315 = LINE('',#9316,#9317);-#9316 = CARTESIAN_POINT('',(0.377057976796,-0.284182274245));+#9316 = CARTESIAN_POINT('',(0.529793591883,0.15)); #9317 = VECTOR('',#9318,1.);-#9318 = DIRECTION('',(-0.839949759337,0.542664170358));+#9318 = DIRECTION('',(0.,-1.)); #9319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9320 = ADVANCED_FACE('',(#9321),#9075,.F.);-#9321 = FACE_BOUND('',#9322,.F.);-#9322 = EDGE_LOOP('',(#9323,#9324,#9325,#9348,#9376,#9404,#9432,#9453));-#9323 = ORIENTED_EDGE('',*,*,#9052,.T.);-#9324 = ORIENTED_EDGE('',*,*,#9249,.T.);-#9325 = ORIENTED_EDGE('',*,*,#9326,.T.);-#9326 = EDGE_CURVE('',#9250,#9327,#9329,.T.);+#9320 = ADVANCED_FACE('',(#9321),#9309,.T.);+#9321 = FACE_BOUND('',#9322,.T.);+#9322 = EDGE_LOOP('',(#9323,#9353,#9374,#9375));+#9323 = ORIENTED_EDGE('',*,*,#9324,.F.);+#9324 = EDGE_CURVE('',#9325,#9327,#9329,.T.);+#9325 = VERTEX_POINT('',#9326);+#9326 = CARTESIAN_POINT('',(2.4875,-1.125,0.)); #9327 = VERTEX_POINT('',#9328);-#9328 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9328 = CARTESIAN_POINT('',(2.4875,-0.825,0.)); #9329 = SURFACE_CURVE('',#9330,(#9334,#9341),.PCURVE_S1.); #9330 = LINE('',#9331,#9332);-#9331 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9331 = CARTESIAN_POINT('',(2.4875,-1.125,0.)); #9332 = VECTOR('',#9333,1.);-#9333 = DIRECTION('',(1.,0.,0.));-#9334 = PCURVE('',#9075,#9335);+#9333 = DIRECTION('',(0.,1.,0.));+#9334 = PCURVE('',#9309,#9335); #9335 = DEFINITIONAL_REPRESENTATION('',(#9336),#9340); #9336 = LINE('',#9337,#9338);-#9337 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));+#9337 = CARTESIAN_POINT('',(0.,-0.15)); #9338 = VECTOR('',#9339,1.); #9339 = DIRECTION('',(0.,1.)); #9340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9341 = PCURVE('',#9288,#9342);-#9342 = DEFINITIONAL_REPRESENTATION('',(#9343),#9347);-#9343 = LINE('',#9344,#9345);-#9344 = CARTESIAN_POINT('',(0.,-0.15));-#9345 = VECTOR('',#9346,1.);-#9346 = DIRECTION('',(1.,0.));-#9347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9348 = ORIENTED_EDGE('',*,*,#9349,.T.);-#9349 = EDGE_CURVE('',#9327,#9350,#9352,.T.);-#9350 = VERTEX_POINT('',#9351);-#9351 = CARTESIAN_POINT('',(3.205,-1.125,0.));-#9352 = SURFACE_CURVE('',#9353,(#9357,#9364),.PCURVE_S1.);-#9353 = LINE('',#9354,#9355);-#9354 = CARTESIAN_POINT('',(3.205,-1.125,0.15));-#9355 = VECTOR('',#9356,1.);-#9356 = DIRECTION('',(0.,0.,-1.));-#9357 = PCURVE('',#9075,#9358);-#9358 = DEFINITIONAL_REPRESENTATION('',(#9359),#9363);-#9359 = LINE('',#9360,#9361);-#9360 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#9361 = VECTOR('',#9362,1.);-#9362 = DIRECTION('',(-1.,0.));-#9363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9364 = PCURVE('',#9365,#9370);-#9365 = PLANE('',#9366);-#9366 = AXIS2_PLACEMENT_3D('',#9367,#9368,#9369);-#9367 = CARTESIAN_POINT('',(3.205,-0.975,0.15));-#9368 = DIRECTION('',(1.,0.,0.));-#9369 = DIRECTION('',(0.,0.,-1.));-#9370 = DEFINITIONAL_REPRESENTATION('',(#9371),#9375);-#9371 = LINE('',#9372,#9373);-#9372 = CARTESIAN_POINT('',(0.,-0.15));-#9373 = VECTOR('',#9374,1.);-#9374 = DIRECTION('',(1.,0.));-#9375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9376 = ORIENTED_EDGE('',*,*,#9377,.T.);-#9377 = EDGE_CURVE('',#9350,#9378,#9380,.T.);-#9378 = VERTEX_POINT('',#9379);-#9379 = CARTESIAN_POINT('',(2.4875,-1.125,0.));-#9380 = SURFACE_CURVE('',#9381,(#9385,#9392),.PCURVE_S1.);-#9381 = LINE('',#9382,#9383);-#9382 = CARTESIAN_POINT('',(3.205,-1.125,0.));-#9383 = VECTOR('',#9384,1.);-#9384 = DIRECTION('',(-1.,0.,0.));-#9385 = PCURVE('',#9075,#9386);-#9386 = DEFINITIONAL_REPRESENTATION('',(#9387),#9391);-#9387 = LINE('',#9388,#9389);-#9388 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));-#9389 = VECTOR('',#9390,1.);-#9390 = DIRECTION('',(0.,-1.));-#9391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9392 = PCURVE('',#9393,#9398);-#9393 = PLANE('',#9394);-#9394 = AXIS2_PLACEMENT_3D('',#9395,#9396,#9397);-#9395 = CARTESIAN_POINT('',(3.205,-0.975,0.));-#9396 = DIRECTION('',(-0.,-0.,-1.));-#9397 = DIRECTION('',(-1.,0.,0.));-#9398 = DEFINITIONAL_REPRESENTATION('',(#9399),#9403);-#9399 = LINE('',#9400,#9401);-#9400 = CARTESIAN_POINT('',(0.,-0.15));-#9401 = VECTOR('',#9402,1.);-#9402 = DIRECTION('',(1.,0.));-#9403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9404 = ORIENTED_EDGE('',*,*,#9405,.T.);-#9405 = EDGE_CURVE('',#9378,#9406,#9408,.T.);-#9406 = VERTEX_POINT('',#9407);-#9407 = CARTESIAN_POINT('',(2.2,-1.125,0.445));-#9408 = SURFACE_CURVE('',#9409,(#9413,#9420),.PCURVE_S1.);-#9409 = LINE('',#9410,#9411);-#9410 = CARTESIAN_POINT('',(2.4875,-1.125,0.));-#9411 = VECTOR('',#9412,1.);-#9412 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#9413 = PCURVE('',#9075,#9414);-#9414 = DEFINITIONAL_REPRESENTATION('',(#9415),#9419);-#9415 = LINE('',#9416,#9417);-#9416 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));-#9417 = VECTOR('',#9418,1.);-#9418 = DIRECTION('',(0.839949759337,-0.542664170358));-#9419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9420 = PCURVE('',#9421,#9426);-#9421 = PLANE('',#9422);-#9422 = AXIS2_PLACEMENT_3D('',#9423,#9424,#9425);-#9423 = CARTESIAN_POINT('',(2.4875,-0.975,0.));-#9424 = DIRECTION('',(-0.839949759337,-0.,-0.542664170358));-#9425 = DIRECTION('',(-0.542664170358,0.,0.839949759337));-#9426 = DEFINITIONAL_REPRESENTATION('',(#9427),#9431);-#9427 = LINE('',#9428,#9429);-#9428 = CARTESIAN_POINT('',(0.,-0.15));-#9429 = VECTOR('',#9430,1.);-#9430 = DIRECTION('',(1.,0.));-#9431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9432 = ORIENTED_EDGE('',*,*,#9433,.T.);-#9433 = EDGE_CURVE('',#9406,#9173,#9434,.T.);-#9434 = SURFACE_CURVE('',#9435,(#9439,#9446),.PCURVE_S1.);-#9435 = LINE('',#9436,#9437);-#9436 = CARTESIAN_POINT('',(2.2,-1.125,0.445));-#9437 = VECTOR('',#9438,1.);-#9438 = DIRECTION('',(-1.,0.,0.));-#9439 = PCURVE('',#9075,#9440);-#9440 = DEFINITIONAL_REPRESENTATION('',(#9441),#9445);-#9441 = LINE('',#9442,#9443);-#9442 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#9443 = VECTOR('',#9444,1.);-#9444 = DIRECTION('',(0.,-1.));-#9445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9446 = PCURVE('',#9233,#9447);-#9447 = DEFINITIONAL_REPRESENTATION('',(#9448),#9452);-#9448 = LINE('',#9449,#9450);-#9449 = CARTESIAN_POINT('',(0.,-0.15));-#9450 = VECTOR('',#9451,1.);-#9451 = DIRECTION('',(1.,0.));-#9452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9453 = ORIENTED_EDGE('',*,*,#9172,.T.);-#9454 = ADVANCED_FACE('',(#9455),#9233,.T.);-#9455 = FACE_BOUND('',#9456,.T.);-#9456 = EDGE_LOOP('',(#9457,#9458,#9459,#9482));-#9457 = ORIENTED_EDGE('',*,*,#9433,.T.);-#9458 = ORIENTED_EDGE('',*,*,#9219,.F.);-#9459 = ORIENTED_EDGE('',*,*,#9460,.F.);-#9460 = EDGE_CURVE('',#9461,#9197,#9463,.T.);-#9461 = VERTEX_POINT('',#9462);-#9462 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#9463 = SURFACE_CURVE('',#9464,(#9468,#9475),.PCURVE_S1.);-#9464 = LINE('',#9465,#9466);-#9465 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#9466 = VECTOR('',#9467,1.);-#9467 = DIRECTION('',(-1.,0.,0.));-#9468 = PCURVE('',#9233,#9469);-#9469 = DEFINITIONAL_REPRESENTATION('',(#9470),#9474);-#9470 = LINE('',#9471,#9472);-#9471 = CARTESIAN_POINT('',(0.,0.15));-#9472 = VECTOR('',#9473,1.);-#9473 = DIRECTION('',(1.,0.));-#9474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9475 = PCURVE('',#9131,#9476);-#9476 = DEFINITIONAL_REPRESENTATION('',(#9477),#9481);-#9477 = LINE('',#9478,#9479);-#9478 = CARTESIAN_POINT('',(0.227057976796,-0.434182274245));-#9479 = VECTOR('',#9480,1.);-#9480 = DIRECTION('',(0.,-1.));-#9481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9482 = ORIENTED_EDGE('',*,*,#9483,.T.);-#9483 = EDGE_CURVE('',#9461,#9406,#9484,.T.);-#9484 = SURFACE_CURVE('',#9485,(#9489,#9496),.PCURVE_S1.);-#9485 = LINE('',#9486,#9487);-#9486 = CARTESIAN_POINT('',(2.2,-0.825,0.445));-#9487 = VECTOR('',#9488,1.);-#9488 = DIRECTION('',(0.,-1.,0.));-#9489 = PCURVE('',#9233,#9490);-#9490 = DEFINITIONAL_REPRESENTATION('',(#9491),#9495);-#9491 = LINE('',#9492,#9493);-#9492 = CARTESIAN_POINT('',(0.,0.15));-#9493 = VECTOR('',#9494,1.);-#9494 = DIRECTION('',(0.,-1.));-#9495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9496 = PCURVE('',#9421,#9497);-#9497 = DEFINITIONAL_REPRESENTATION('',(#9498),#9502);-#9498 = LINE('',#9499,#9500);-#9499 = CARTESIAN_POINT('',(0.529793591883,0.15));-#9500 = VECTOR('',#9501,1.);-#9501 = DIRECTION('',(0.,-1.));-#9502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9503 = ADVANCED_FACE('',(#9504),#9288,.T.);-#9504 = FACE_BOUND('',#9505,.T.);-#9505 = EDGE_LOOP('',(#9506,#9507,#9508,#9531));-#9506 = ORIENTED_EDGE('',*,*,#9272,.F.);-#9507 = ORIENTED_EDGE('',*,*,#9326,.T.);-#9508 = ORIENTED_EDGE('',*,*,#9509,.T.);-#9509 = EDGE_CURVE('',#9327,#9510,#9512,.T.);-#9510 = VERTEX_POINT('',#9511);-#9511 = CARTESIAN_POINT('',(3.205,-0.825,0.15));-#9512 = SURFACE_CURVE('',#9513,(#9517,#9524),.PCURVE_S1.);-#9513 = LINE('',#9514,#9515);-#9514 = CARTESIAN_POINT('',(3.205,-1.125,0.15));-#9515 = VECTOR('',#9516,1.);-#9516 = DIRECTION('',(0.,1.,0.));-#9517 = PCURVE('',#9288,#9518);-#9518 = DEFINITIONAL_REPRESENTATION('',(#9519),#9523);-#9519 = LINE('',#9520,#9521);-#9520 = CARTESIAN_POINT('',(0.5675,-0.15));-#9521 = VECTOR('',#9522,1.);-#9522 = DIRECTION('',(0.,1.));-#9523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9524 = PCURVE('',#9365,#9525);-#9525 = DEFINITIONAL_REPRESENTATION('',(#9526),#9530);-#9526 = LINE('',#9527,#9528);-#9527 = CARTESIAN_POINT('',(0.,-0.15));-#9528 = VECTOR('',#9529,1.);-#9529 = DIRECTION('',(0.,1.));-#9530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9531 = ORIENTED_EDGE('',*,*,#9532,.F.);-#9532 = EDGE_CURVE('',#9273,#9510,#9533,.T.);-#9533 = SURFACE_CURVE('',#9534,(#9538,#9545),.PCURVE_S1.);-#9534 = LINE('',#9535,#9536);-#9535 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));-#9536 = VECTOR('',#9537,1.);-#9537 = DIRECTION('',(1.,0.,0.));-#9538 = PCURVE('',#9288,#9539);-#9539 = DEFINITIONAL_REPRESENTATION('',(#9540),#9544);-#9540 = LINE('',#9541,#9542);-#9541 = CARTESIAN_POINT('',(0.,0.15));-#9542 = VECTOR('',#9543,1.);-#9543 = DIRECTION('',(1.,0.));-#9544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9545 = PCURVE('',#9131,#9546);-#9546 = DEFINITIONAL_REPRESENTATION('',(#9547),#9551);-#9547 = LINE('',#9548,#9549);-#9548 = CARTESIAN_POINT('',(-6.7942023204E-02,3.317725754662E-03));-#9549 = VECTOR('',#9550,1.);-#9550 = DIRECTION('',(0.,1.));-#9551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9552 = ADVANCED_FACE('',(#9553),#9131,.T.);-#9553 = FACE_BOUND('',#9554,.T.);-#9554 = EDGE_LOOP('',(#9555,#9556,#9557,#9558,#9581,#9604,#9625,#9626));-#9555 = ORIENTED_EDGE('',*,*,#9115,.T.);-#9556 = ORIENTED_EDGE('',*,*,#9300,.T.);-#9557 = ORIENTED_EDGE('',*,*,#9532,.T.);-#9558 = ORIENTED_EDGE('',*,*,#9559,.T.);-#9559 = EDGE_CURVE('',#9510,#9560,#9562,.T.);-#9560 = VERTEX_POINT('',#9561);-#9561 = CARTESIAN_POINT('',(3.205,-0.825,0.));-#9562 = SURFACE_CURVE('',#9563,(#9567,#9574),.PCURVE_S1.);-#9563 = LINE('',#9564,#9565);-#9564 = CARTESIAN_POINT('',(3.205,-0.825,0.15));-#9565 = VECTOR('',#9566,1.);-#9566 = DIRECTION('',(0.,0.,-1.));-#9567 = PCURVE('',#9131,#9568);-#9568 = DEFINITIONAL_REPRESENTATION('',(#9569),#9573);-#9569 = LINE('',#9570,#9571);-#9570 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));-#9571 = VECTOR('',#9572,1.);-#9572 = DIRECTION('',(-1.,0.));-#9573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9574 = PCURVE('',#9365,#9575);-#9575 = DEFINITIONAL_REPRESENTATION('',(#9576),#9580);-#9576 = LINE('',#9577,#9578);-#9577 = CARTESIAN_POINT('',(0.,0.15));-#9578 = VECTOR('',#9579,1.);-#9579 = DIRECTION('',(1.,0.));-#9580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9581 = ORIENTED_EDGE('',*,*,#9582,.T.);-#9582 = EDGE_CURVE('',#9560,#9583,#9585,.T.);-#9583 = VERTEX_POINT('',#9584);-#9584 = CARTESIAN_POINT('',(2.4875,-0.825,0.));-#9585 = SURFACE_CURVE('',#9586,(#9590,#9597),.PCURVE_S1.);-#9586 = LINE('',#9587,#9588);-#9587 = CARTESIAN_POINT('',(3.205,-0.825,0.));-#9588 = VECTOR('',#9589,1.);-#9589 = DIRECTION('',(-1.,0.,0.));-#9590 = PCURVE('',#9131,#9591);+#9341 = PCURVE('',#9342,#9347);+#9342 = PLANE('',#9343);+#9343 = AXIS2_PLACEMENT_3D('',#9344,#9345,#9346);+#9344 = CARTESIAN_POINT('',(3.205,-0.975,0.));+#9345 = DIRECTION('',(-0.,-0.,-1.));+#9346 = DIRECTION('',(-1.,0.,0.));+#9347 = DEFINITIONAL_REPRESENTATION('',(#9348),#9352);+#9348 = LINE('',#9349,#9350);+#9349 = CARTESIAN_POINT('',(0.7175,-0.15));+#9350 = VECTOR('',#9351,1.);+#9351 = DIRECTION('',(0.,1.));+#9352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9353 = ORIENTED_EDGE('',*,*,#9354,.T.);+#9354 = EDGE_CURVE('',#9325,#9249,#9355,.T.);+#9355 = SURFACE_CURVE('',#9356,(#9360,#9367),.PCURVE_S1.);+#9356 = LINE('',#9357,#9358);+#9357 = CARTESIAN_POINT('',(2.4875,-1.125,0.));+#9358 = VECTOR('',#9359,1.);+#9359 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9360 = PCURVE('',#9309,#9361);+#9361 = DEFINITIONAL_REPRESENTATION('',(#9362),#9366);+#9362 = LINE('',#9363,#9364);+#9363 = CARTESIAN_POINT('',(0.,-0.15));+#9364 = VECTOR('',#9365,1.);+#9365 = DIRECTION('',(1.,0.));+#9366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9367 = PCURVE('',#9075,#9368);+#9368 = DEFINITIONAL_REPRESENTATION('',(#9369),#9373);+#9369 = LINE('',#9370,#9371);+#9370 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9371 = VECTOR('',#9372,1.);+#9372 = DIRECTION('',(0.839949759337,-0.542664170358));+#9373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9374 = ORIENTED_EDGE('',*,*,#9295,.F.);+#9375 = ORIENTED_EDGE('',*,*,#9376,.F.);+#9376 = EDGE_CURVE('',#9327,#9273,#9377,.T.);+#9377 = SURFACE_CURVE('',#9378,(#9382,#9389),.PCURVE_S1.);+#9378 = LINE('',#9379,#9380);+#9379 = CARTESIAN_POINT('',(2.4875,-0.825,0.));+#9380 = VECTOR('',#9381,1.);+#9381 = DIRECTION('',(-0.542664170358,0.,0.839949759337));+#9382 = PCURVE('',#9309,#9383);+#9383 = DEFINITIONAL_REPRESENTATION('',(#9384),#9388);+#9384 = LINE('',#9385,#9386);+#9385 = CARTESIAN_POINT('',(0.,0.15));+#9386 = VECTOR('',#9387,1.);+#9387 = DIRECTION('',(1.,0.));+#9388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9389 = PCURVE('',#9131,#9390);+#9390 = DEFINITIONAL_REPRESENTATION('',(#9391),#9395);+#9391 = LINE('',#9392,#9393);+#9392 = CARTESIAN_POINT('',(-0.217942023204,-0.146682274245));+#9393 = VECTOR('',#9394,1.);+#9394 = DIRECTION('',(0.839949759337,-0.542664170358));+#9395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9396 = ADVANCED_FACE('',(#9397),#9342,.T.);+#9397 = FACE_BOUND('',#9398,.T.);+#9398 = EDGE_LOOP('',(#9399,#9429,#9450,#9451));+#9399 = ORIENTED_EDGE('',*,*,#9400,.F.);+#9400 = EDGE_CURVE('',#9401,#9403,#9405,.T.);+#9401 = VERTEX_POINT('',#9402);+#9402 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9403 = VERTEX_POINT('',#9404);+#9404 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#9405 = SURFACE_CURVE('',#9406,(#9410,#9417),.PCURVE_S1.);+#9406 = LINE('',#9407,#9408);+#9407 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9408 = VECTOR('',#9409,1.);+#9409 = DIRECTION('',(0.,1.,0.));+#9410 = PCURVE('',#9342,#9411);+#9411 = DEFINITIONAL_REPRESENTATION('',(#9412),#9416);+#9412 = LINE('',#9413,#9414);+#9413 = CARTESIAN_POINT('',(0.,-0.15));+#9414 = VECTOR('',#9415,1.);+#9415 = DIRECTION('',(0.,1.));+#9416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9417 = PCURVE('',#9418,#9423);+#9418 = PLANE('',#9419);+#9419 = AXIS2_PLACEMENT_3D('',#9420,#9421,#9422);+#9420 = CARTESIAN_POINT('',(3.205,-0.975,0.15));+#9421 = DIRECTION('',(1.,0.,0.));+#9422 = DIRECTION('',(0.,0.,-1.));+#9423 = DEFINITIONAL_REPRESENTATION('',(#9424),#9428);+#9424 = LINE('',#9425,#9426);+#9425 = CARTESIAN_POINT('',(0.15,-0.15));+#9426 = VECTOR('',#9427,1.);+#9427 = DIRECTION('',(0.,1.));+#9428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9429 = ORIENTED_EDGE('',*,*,#9430,.T.);+#9430 = EDGE_CURVE('',#9401,#9325,#9431,.T.);+#9431 = SURFACE_CURVE('',#9432,(#9436,#9443),.PCURVE_S1.);+#9432 = LINE('',#9433,#9434);+#9433 = CARTESIAN_POINT('',(3.205,-1.125,0.));+#9434 = VECTOR('',#9435,1.);+#9435 = DIRECTION('',(-1.,0.,0.));+#9436 = PCURVE('',#9342,#9437);+#9437 = DEFINITIONAL_REPRESENTATION('',(#9438),#9442);+#9438 = LINE('',#9439,#9440);+#9439 = CARTESIAN_POINT('',(0.,-0.15));+#9440 = VECTOR('',#9441,1.);+#9441 = DIRECTION('',(1.,0.));+#9442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9443 = PCURVE('',#9075,#9444);+#9444 = DEFINITIONAL_REPRESENTATION('',(#9445),#9449);+#9445 = LINE('',#9446,#9447);+#9446 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#9447 = VECTOR('',#9448,1.);+#9448 = DIRECTION('',(0.,-1.));+#9449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9450 = ORIENTED_EDGE('',*,*,#9324,.T.);+#9451 = ORIENTED_EDGE('',*,*,#9452,.F.);+#9452 = EDGE_CURVE('',#9403,#9327,#9453,.T.);+#9453 = SURFACE_CURVE('',#9454,(#9458,#9465),.PCURVE_S1.);+#9454 = LINE('',#9455,#9456);+#9455 = CARTESIAN_POINT('',(3.205,-0.825,0.));+#9456 = VECTOR('',#9457,1.);+#9457 = DIRECTION('',(-1.,0.,0.));+#9458 = PCURVE('',#9342,#9459);+#9459 = DEFINITIONAL_REPRESENTATION('',(#9460),#9464);+#9460 = LINE('',#9461,#9462);+#9461 = CARTESIAN_POINT('',(0.,0.15));+#9462 = VECTOR('',#9463,1.);+#9463 = DIRECTION('',(1.,0.));+#9464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9465 = PCURVE('',#9131,#9466);+#9466 = DEFINITIONAL_REPRESENTATION('',(#9467),#9471);+#9467 = LINE('',#9468,#9469);+#9468 = CARTESIAN_POINT('',(-0.217942023204,0.570817725755));+#9469 = VECTOR('',#9470,1.);+#9470 = DIRECTION('',(0.,-1.));+#9471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9472 = ADVANCED_FACE('',(#9473),#9418,.T.);+#9473 = FACE_BOUND('',#9474,.T.);+#9474 = EDGE_LOOP('',(#9475,#9505,#9526,#9527));+#9475 = ORIENTED_EDGE('',*,*,#9476,.F.);+#9476 = EDGE_CURVE('',#9477,#9479,#9481,.T.);+#9477 = VERTEX_POINT('',#9478);+#9478 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9479 = VERTEX_POINT('',#9480);+#9480 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#9481 = SURFACE_CURVE('',#9482,(#9486,#9493),.PCURVE_S1.);+#9482 = LINE('',#9483,#9484);+#9483 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9484 = VECTOR('',#9485,1.);+#9485 = DIRECTION('',(0.,1.,0.));+#9486 = PCURVE('',#9418,#9487);+#9487 = DEFINITIONAL_REPRESENTATION('',(#9488),#9492);+#9488 = LINE('',#9489,#9490);+#9489 = CARTESIAN_POINT('',(0.,-0.15));+#9490 = VECTOR('',#9491,1.);+#9491 = DIRECTION('',(0.,1.));+#9492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9493 = PCURVE('',#9494,#9499);+#9494 = PLANE('',#9495);+#9495 = AXIS2_PLACEMENT_3D('',#9496,#9497,#9498);+#9496 = CARTESIAN_POINT('',(2.6375,-0.975,0.15));+#9497 = DIRECTION('',(-0.,0.,1.));+#9498 = DIRECTION('',(1.,0.,0.));+#9499 = DEFINITIONAL_REPRESENTATION('',(#9500),#9504);+#9500 = LINE('',#9501,#9502);+#9501 = CARTESIAN_POINT('',(0.5675,-0.15));+#9502 = VECTOR('',#9503,1.);+#9503 = DIRECTION('',(0.,1.));+#9504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9505 = ORIENTED_EDGE('',*,*,#9506,.T.);+#9506 = EDGE_CURVE('',#9477,#9401,#9507,.T.);+#9507 = SURFACE_CURVE('',#9508,(#9512,#9519),.PCURVE_S1.);+#9508 = LINE('',#9509,#9510);+#9509 = CARTESIAN_POINT('',(3.205,-1.125,0.15));+#9510 = VECTOR('',#9511,1.);+#9511 = DIRECTION('',(0.,0.,-1.));+#9512 = PCURVE('',#9418,#9513);+#9513 = DEFINITIONAL_REPRESENTATION('',(#9514),#9518);+#9514 = LINE('',#9515,#9516);+#9515 = CARTESIAN_POINT('',(0.,-0.15));+#9516 = VECTOR('',#9517,1.);+#9517 = DIRECTION('',(1.,0.));+#9518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9519 = PCURVE('',#9075,#9520);+#9520 = DEFINITIONAL_REPRESENTATION('',(#9521),#9525);+#9521 = LINE('',#9522,#9523);+#9522 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#9523 = VECTOR('',#9524,1.);+#9524 = DIRECTION('',(-1.,0.));+#9525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9526 = ORIENTED_EDGE('',*,*,#9400,.T.);+#9527 = ORIENTED_EDGE('',*,*,#9528,.F.);+#9528 = EDGE_CURVE('',#9479,#9403,#9529,.T.);+#9529 = SURFACE_CURVE('',#9530,(#9534,#9541),.PCURVE_S1.);+#9530 = LINE('',#9531,#9532);+#9531 = CARTESIAN_POINT('',(3.205,-0.825,0.15));+#9532 = VECTOR('',#9533,1.);+#9533 = DIRECTION('',(0.,0.,-1.));+#9534 = PCURVE('',#9418,#9535);+#9535 = DEFINITIONAL_REPRESENTATION('',(#9536),#9540);+#9536 = LINE('',#9537,#9538);+#9537 = CARTESIAN_POINT('',(0.,0.15));+#9538 = VECTOR('',#9539,1.);+#9539 = DIRECTION('',(1.,0.));+#9540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9541 = PCURVE('',#9131,#9542);+#9542 = DEFINITIONAL_REPRESENTATION('',(#9543),#9547);+#9543 = LINE('',#9544,#9545);+#9544 = CARTESIAN_POINT('',(-6.7942023204E-02,0.570817725755));+#9545 = VECTOR('',#9546,1.);+#9546 = DIRECTION('',(-1.,0.));+#9547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9548 = ADVANCED_FACE('',(#9549),#9494,.T.);+#9549 = FACE_BOUND('',#9550,.T.);+#9550 = EDGE_LOOP('',(#9551,#9576,#9597,#9598));+#9551 = ORIENTED_EDGE('',*,*,#9552,.F.);+#9552 = EDGE_CURVE('',#9553,#9555,#9557,.T.);+#9553 = VERTEX_POINT('',#9554);+#9554 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9555 = VERTEX_POINT('',#9556);+#9556 = CARTESIAN_POINT('',(2.6375,-0.825,0.15));+#9557 = SURFACE_CURVE('',#9558,(#9562,#9569),.PCURVE_S1.);+#9558 = LINE('',#9559,#9560);+#9559 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9560 = VECTOR('',#9561,1.);+#9561 = DIRECTION('',(0.,1.,0.));+#9562 = PCURVE('',#9494,#9563);+#9563 = DEFINITIONAL_REPRESENTATION('',(#9564),#9568);+#9564 = LINE('',#9565,#9566);+#9565 = CARTESIAN_POINT('',(0.,-0.15));+#9566 = VECTOR('',#9567,1.);+#9567 = DIRECTION('',(0.,1.));+#9568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9569 = PCURVE('',#9103,#9570);+#9570 = DEFINITIONAL_REPRESENTATION('',(#9571),#9575);+#9571 = LINE('',#9572,#9573);+#9572 = CARTESIAN_POINT('',(0.529793591883,-0.15));+#9573 = VECTOR('',#9574,1.);+#9574 = DIRECTION('',(0.,1.));+#9575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9576 = ORIENTED_EDGE('',*,*,#9577,.T.);+#9577 = EDGE_CURVE('',#9553,#9477,#9578,.T.);+#9578 = SURFACE_CURVE('',#9579,(#9583,#9590),.PCURVE_S1.);+#9579 = LINE('',#9580,#9581);+#9580 = CARTESIAN_POINT('',(2.6375,-1.125,0.15));+#9581 = VECTOR('',#9582,1.);