TPS61180RTER

@@ -0,0 +1,254 @@+{+  "slug": "tps61180rter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps61180rter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps61180rter.kicad_sym",+    "tps61180rter.kicad_mod",+    "tps61180rter.glb",+    "tps61180rter.step",+    "tps61180rter.lbr",+    "docs/hero.png",+    "docs/tps61180rter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tps61180rter-hero.glb",+    "tps61180rter-hero.overlay.json"+  ],+  "component": {+    "mpn": "TPS61180RTER",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61182",+    "parts": {+      "symbol": "tps61180rter.kicad_sym",+      "footprint": "tps61180rter.kicad_mod",+      "model_3d": "tps61180rter-hero.glb",+      "model_3d_plain": "tps61180rter.glb",+      "model_3d_step": "tps61180rter-etched.step",+      "model_3d_step_plain": "tps61180rter.step",+      "lbr": "tps61180rter.lbr"+    },+    "distributor_links": {+      "lcsc": "C2678704",+      "digikey": "296-23377-2-ND",+      "mouser": "595-TPS61180RTER"+    },+    "distributor_check": {+      "checked_at": "2026-10-07T08:38:26Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-23377-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS61180RTER",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC internally connected to the source of the PWM switch."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "passive",+        "description": "Switching node connected to the drain of the internal PWM switch, external Schottky diode, and inductor."+      },+      {+        "number": "3",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery supply input in range 5V to 24V, provides pull-up voltage for Fault pin and battery voltage signal."+      },+      {+        "number": "4",+        "name": "VO",+        "type": "power_out",+        "description": "Regulated boost output (minimum 16V, maximum 40V overvoltage threshold) connected to the anode of WLED strings."+      },+      {+        "number": "5",+        "name": "ISET",+        "type": "input",+        "description": "Current setting input, resistor-programmed WLED output current with typical pin voltage 1.229V."+      },+      {+        "number": "6",+        "name": "Cin",+        "type": "power_in",+        "description": "IC supply voltage input in range 2.7V to 3.6V for TPS61180, requires 0.1μF bypass capacitor."+      },+      {+        "number": "7",+        "name": "IFB1",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "8",+        "name": "IFB2",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "9",+        "name": "IFB3",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground of the IC."+      },+      {+        "number": "11",+        "name": "DCTRL",+        "type": "input",+        "description": "Dimming control logic input for PWM brightness dimming with frequency range 100Hz to 1kHz."+      },+      {+        "number": "12",+        "name": "IFB4",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "13",+        "name": "IFB5",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "14",+        "name": "IFB6",+        "type": "input",+        "description": "Current feedback input connected to WLED cathode, regulates to 400mV with maximum 25mA per channel."+      },+      {+        "number": "15",+        "name": "EN",+        "type": "input",+        "description": "Enable input logic signal, logic high enables IC with internal pull-down resistance 400kΩ to 1600kΩ."+      },+      {+        "number": "16",+        "name": "Fault",+        "type": "output",+        "description": "Gate driver output for external PFET fault protection or system fault signal output, can sink 0.1mA."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 13,+        "cost_usd": 0.1561,+        "at": "2026-10-07T08:38:12"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps61182",+        "pages": 29,+        "sha256": "e9480e02f5fae586",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tps61180rter.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3,+          3,+          0.785+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps61180rter-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3,+          3,+          0.785+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "1e12b535dca3af3b61c06a4572d519abcb6d3b4c4baa9391deb1fde435dcd2a2",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file