component
TPS60313DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# TPS60313DGSR++**Texas Instruments** · DC-DC Converters · VSSOP-10-0.5mm++TPS60313DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SNOOZE | input | Snooze mode enable input: pulling it low enables snooze mode at low output current, and pulling it high disables snooze mode. |+| 2 | C1- | passive | Negative terminal of the flying capacitor C1F. |+| 3 | VIN | power_in | Supply input for a 0.9 V to 1.8 V input range; bypass VIN to GND with a capacitor of at least 1 µF. |+| 4 | C1+ | passive | Positive terminal of the flying capacitor C1F. |+| 5 | OUT1 | power_out | 2 × VIN power output, rated for a maximum of 40 mA when OUT2 is not loaded; bypass to GND with the output filter capacitor C(OUT1). |+| 6 | OUT2 | power_out | Regulated 3-V power output on the TPS60313, rated for a maximum of 20 mA when OUT1 is not loaded; bypass to GND with the output filter capacitor C(OUT2). |+| 7 | C2+ | passive | Positive terminal of the flying capacitor C2F. |+| 8 | C2- | passive | Negative terminal of the flying capacitor C2F. |+| 9 | GND | power_in | Ground reference for the device. |+| 10 | PG | output | Power-good output that goes high when OUT2 reaches about 98% of its nominal value; on the TPS60313 it is a push-pull output, and any current drawn from PG reduces the maximum OUT2 output current. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Power Supply Chip |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `TPS60313DGSR`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `tps60313dgsr-etched.step` / `tps60313dgsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps60313dgsr.step` / `tps60313dgsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/ds/symlink/tps60311.pdf) (28 pp, sha256 `032edc7b4bf6e40d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps60313dgsr-datasheet.pdf)
page.jsonadded+212@@ -0,0 +1,212 @@+{+ "slug": "tps60313dgsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps60313dgsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps60313dgsr.kicad_sym",+ "tps60313dgsr.kicad_mod",+ "tps60313dgsr.glb",+ "tps60313dgsr.step",+ "tps60313dgsr.lbr",+ "docs/hero.png",+ "docs/tps60313dgsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps60313dgsr-hero.glb",+ "tps60313dgsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS60313DGSR",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps60311.pdf",+ "parts": {+ "symbol": "tps60313dgsr.kicad_sym",+ "footprint": "tps60313dgsr.kicad_mod",+ "model_3d": "tps60313dgsr-hero.glb",+ "model_3d_plain": "tps60313dgsr.glb",+ "model_3d_step": "tps60313dgsr-etched.step",+ "model_3d_step_plain": "tps60313dgsr.step",+ "lbr": "tps60313dgsr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2070780",+ "digikey": "296-13417-2-ND",+ "mouser": "595-TPS60313DGSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:27:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-13417-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS60313DGSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SNOOZE",+ "type": "input",+ "description": "Snooze mode enable input: pulling it low enables snooze mode at low output current, and pulling it high disables snooze mode."+ },+ {+ "number": "2",+ "name": "C1–",+ "type": "passive",+ "description": "Negative terminal of the flying capacitor C1F."+ },+ {+ "number": "3",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input for a 0.9 V to 1.8 V input range; bypass VIN to GND with a capacitor of at least 1 µF."+ },+ {+ "number": "4",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of the flying capacitor C1F."+ },+ {+ "number": "5",+ "name": "OUT1",+ "type": "power_out",+ "description": "2 × VIN power output, rated for a maximum of 40 mA when OUT2 is not loaded; bypass to GND with the output filter capacitor C(OUT1)."+ },+ {+ "number": "6",+ "name": "OUT2",+ "type": "power_out",+ "description": "Regulated 3-V power output on the TPS60313, rated for a maximum of 20 mA when OUT1 is not loaded; bypass to GND with the output filter capacitor C(OUT2)."+ },+ {+ "number": "7",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of the flying capacitor C2F."+ },+ {+ "number": "8",+ "name": "C2–",+ "type": "passive",+ "description": "Negative terminal of the flying capacitor C2F."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "10",+ "name": "PG",+ "type": "output",+ "description": "Power-good output that goes high when OUT2 reaches about 98% of its nominal value; on the TPS60313 it is a push-pull output, and any current drawn from PG reduces the maximum OUT2 output current."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VIN is listed as an input (I) in the datasheet terminal table; it is typed power_in here as the supp; The flying-capacitor pins C1+, C1–, C2+ and C2– are not given an I/O direction in the datasheet, so "+ ],+ "pages_sent": 8,+ "cost_usd": 0.0536,+ "at": "2026-10-08T15:27:05"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/ds/symlink/tps60311.pdf",+ "pages": 28,+ "sha256": "032edc7b4bf6e40d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps60313dgsr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps60313dgsr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d4a48111efe052b281a3c1479a76dae9bd7ebdc12cbbb28b7dbba9927b707894",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}