component
TPS60212DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# TPS60212DGSR++**Texas Instruments** · DC-DC Converters · VSSOP-10-0.5mm++TPS60212DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LBI/GND | input | Low-battery detector input on the TPS60212; a low-battery warning is generated at LBO when the voltage on LBI drops below the 1.18-V threshold, and LBI should be tied to GND or VBAT if the detector is not used. |+| 2 | GND | power_in | Ground reference for the device. |+| 3 | C1− | passive | Negative terminal of flying capacitor C1. |+| 4 | C1+ | passive | Positive terminal of flying capacitor C1. |+| 5 | OUT | power_out | Regulated 3.3-V power output, bypassed to GND with the output filter capacitor Co. |+| 6 | C2+ | passive | Positive terminal of flying capacitor C2. |+| 7 | IN | power_in | Supply input, from 1.8 V to 3.6 V, to be bypassed to GND with a capacitor of at least 2.2 µF. |+| 8 | C2− | passive | Negative terminal of flying capacitor C2. |+| 9 | SNOOZE | input | Mode control: low selects snooze mode (about 2 µA, output held at 3.3 V ±6%, load limited to 2 mA), high selects normal operation, and an external clock applied here synchronizes the charge pump. |+| 10 | LBO/PG | output | Open-drain low-battery output on the TPS60212, pulled low when LBI is below 1.18 V; a pullup should go to OUT or to a logic rail below 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Power Supply Chip |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `TPS60212DGSR`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `tps60212dgsr-etched.step` / `tps60212dgsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps60212dgsr.step` / `tps60212dgsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps60210) (28 pp, sha256 `4cdd47bb12a89a6c`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps60212dgsr-datasheet.pdf)
page.jsonadded+212@@ -0,0 +1,212 @@+{+ "slug": "tps60212dgsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps60212dgsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps60212dgsr.kicad_sym",+ "tps60212dgsr.kicad_mod",+ "tps60212dgsr.glb",+ "tps60212dgsr.step",+ "tps60212dgsr.lbr",+ "docs/hero.png",+ "docs/tps60212dgsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps60212dgsr-hero.glb",+ "tps60212dgsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS60212DGSR",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps60210",+ "parts": {+ "symbol": "tps60212dgsr.kicad_sym",+ "footprint": "tps60212dgsr.kicad_mod",+ "model_3d": "tps60212dgsr-hero.glb",+ "model_3d_plain": "tps60212dgsr.glb",+ "model_3d_step": "tps60212dgsr-etched.step",+ "model_3d_step_plain": "tps60212dgsr.step",+ "lbr": "tps60212dgsr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2072461",+ "digikey": "TPS60212DGSR-ND",+ "mouser": "595-TPS60212DGSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:33:53Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TPS60212DGSR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS60212DGSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "LBI/GND",+ "type": "input",+ "description": "Low-battery detector input on the TPS60212; a low-battery warning is generated at LBO when the voltage on LBI drops below the 1.18-V threshold, and LBI should be tied to GND or VBAT if the detector is not used."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "3",+ "name": "C1−",+ "type": "passive",+ "description": "Negative terminal of flying capacitor C1."+ },+ {+ "number": "4",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of flying capacitor C1."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated 3.3-V power output, bypassed to GND with the output filter capacitor Co."+ },+ {+ "number": "6",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of flying capacitor C2."+ },+ {+ "number": "7",+ "name": "IN",+ "type": "power_in",+ "description": "Supply input, from 1.8 V to 3.6 V, to be bypassed to GND with a capacitor of at least 2.2 µF."+ },+ {+ "number": "8",+ "name": "C2−",+ "type": "passive",+ "description": "Negative terminal of flying capacitor C2."+ },+ {+ "number": "9",+ "name": "SNOOZE",+ "type": "input",+ "description": "Mode control: low selects snooze mode (about 2 µA, output held at 3.3 V ±6%, load limited to 2 mA), high selects normal operation, and an external clock applied here synchronizes the charge pump."+ },+ {+ "number": "10",+ "name": "LBO/PG",+ "type": "output",+ "description": "Open-drain low-battery output on the TPS60212, pulled low when LBI is below 1.18 V; a pullup should go to OUT or to a logic rail below 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DGS pin drawing and terminal table cover both the TPS60210/TPS60212 (LBI/LBO) and TPS60211/TPS60"+ ],+ "pages_sent": 9,+ "cost_usd": 0.0596,+ "at": "2026-10-08T15:33:29"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps60210",+ "pages": 28,+ "sha256": "4cdd47bb12a89a6c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps60212dgsr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps60212dgsr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "29f45e6ada5476d5cc306e82517db73bda230db6ebd352f9bd31250a94eb4b53",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}