component
TPS563208DDCR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (DIGIKEY_PN 296-44844-2-ND, LCSC_PN C468250). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+29−7
page.json+8−5@@ -26,7 +26,10 @@ "model_3d_step": "tps563208ddcr.step", "lbr": "tps563208ddcr.lbr" },- "distributor_links": {},+ "distributor_links": {+ "digikey": "296-44844-2-ND",+ "lcsc": "C468250"+ }, "pins": [ { "number": "1",@@ -38,7 +41,7 @@ "number": "2", "name": "SW", "type": "output",- "description": "Switch node connection between the internal high-side NFET and low-side NFET. Connect to the output inductor. Absolute-max range −2 V to 19 V; SW voltage referenced during 10-ns transient extends −3.5 V to 21 V."+ "description": "Switch node connection between the internal high-side NFET and low-side NFET. Connect to the output inductor. Absolute-max range \u22122 V to 19 V; SW voltage referenced during 10-ns transient extends \u22123.5 V to 21 V." }, { "number": "3",@@ -50,19 +53,19 @@ "number": "4", "name": "VFB", "type": "input",- "description": "Converter feedback input. Connect to the output voltage through a feedback resistor divider. Internal reference V_FBTH ≈ 768 mV (CCM); input current ≤ ±0.1 µA."+ "description": "Converter feedback input. Connect to the output voltage through a feedback resistor divider. Internal reference V_FBTH \u2248 768 mV (CCM); input current \u2264 \u00b10.1 \u00b5A." }, { "number": "5", "name": "EN", "type": "input",- "description": "Enable input control. Active high; must be pulled up to enable the device. V_ENH ≥ 1.6 V (on), V_ENL ≤ 0.8 V (off). Internal pull-down resistance to GND ≈ 400 kΩ (225-900 kΩ)."+ "description": "Enable input control. Active high; must be pulled up to enable the device. V_ENH \u2265 1.6 V (on), V_ENL \u2264 0.8 V (off). Internal pull-down resistance to GND \u2248 400 k\u03a9 (225-900 k\u03a9)." }, { "number": "6", "name": "VBST", "type": "power_out",- "description": "Bootstrap supply input for the high-side NFET gate-drive circuit. Connect a 0.1-µF ceramic capacitor between VBST and SW. Absolute-max VBST (vs SW) 6.5 V."+ "description": "Bootstrap supply input for the high-side NFET gate-drive circuit. Connect a 0.1-\u00b5F ceramic capacitor between VBST and SW. Absolute-max VBST (vs SW) 6.5 V." } ], "provenance": {
tps563208ddcr.lbr+21−2@@ -60,6 +60,18 @@ <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="-0.0000" dx="1.3250" dy="0.6000" layer="1"/> <smd name="6" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="TPS563208DDCR">@@ -102,7 +114,14 @@ <connect gate="G$1" pin="EN" pad="5"/> <connect gate="G$1" pin="VFB" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TPS563208DDCR" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ <attribute name="DIGIKEY_PN" value="296-44844-2-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C468250" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>