component
TPS560200QDGKTQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# TPS560200QDGKTQ1++**Texas Instruments** · DC-DC Converters · VSSOP-8-0.65mm++TPS560200QDGKTQ1 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Enable pin; leave floating to enable the converter, with absolute maximum -0.3 V to 7 V, source/sink current limited to ±100 µA, and rising enable threshold of 1.16 V to 1.29 V. |+| 2 | GND | power_in | Ground return for the control circuitry and the low-side power MOSFET; must be connected to the PCB ground plane. |+| 3 | VSENSE | input | Converter feedback input, connected to the output voltage through a resistor divider; the internal reference is 0.8 V and the absolute maximum is 3 V. |+| 4 | NC | unconnected | Internal no-connect; may be connected to any node or left floating. |+| 5 | NC | unconnected | Internal no-connect; may be connected to any node or left floating. |+| 6 | VIN | power_in | Supplies power to the converter control circuits; recommended input range is 4.5 V to 17 V, with absolute maximum of 19 V, and must be bypassed to GND with low-ESR ceramic capacitance. |+| 7 | PH | output | Switch-mode node connecting to the output inductor; absolute maximum is -0.6 V to 19 V DC (-2 V to 21 V for 10 ns transients). |+| 8 | GND | power_in | Ground return for the control circuitry and the low-side power MOSFET; must be connected to the PCB ground plane. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | Power Supply Chip |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TPS560200QDGKTQ1`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)+- 3D model files: `tps560200qdgktq1-etched.step` / `tps560200qdgktq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps560200qdgktq1.step` / `tps560200qdgktq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps560200-q1) (25 pp, sha256 `57a9bc7a105609d4`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps560200qdgktq1-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "tps560200qdgktq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps560200qdgktq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps560200qdgktq1.kicad_sym",+ "tps560200qdgktq1.kicad_mod",+ "tps560200qdgktq1.glb",+ "tps560200qdgktq1.step",+ "tps560200qdgktq1.lbr",+ "docs/hero.png",+ "docs/tps560200qdgktq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps560200qdgktq1-hero.glb",+ "tps560200qdgktq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS560200QDGKTQ1",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8-0.65mm",+ "pin_count": 8,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps560200-q1",+ "parts": {+ "symbol": "tps560200qdgktq1.kicad_sym",+ "footprint": "tps560200qdgktq1.kicad_mod",+ "model_3d": "tps560200qdgktq1-hero.glb",+ "model_3d_plain": "tps560200qdgktq1.glb",+ "model_3d_step": "tps560200qdgktq1-etched.step",+ "model_3d_step_plain": "tps560200qdgktq1.step",+ "lbr": "tps560200qdgktq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2071288",+ "digikey": "296-47884-2-ND",+ "mouser": "595-TPS560200QDGKTQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:39:28Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47884-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS560200QDGKTQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Enable pin; leave floating to enable the converter, with absolute maximum -0.3 V to 7 V, source/sink current limited to ±100 µA, and rising enable threshold of 1.16 V to 1.29 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the control circuitry and the low-side power MOSFET; must be connected to the PCB ground plane."+ },+ {+ "number": "3",+ "name": "VSENSE",+ "type": "input",+ "description": "Converter feedback input, connected to the output voltage through a resistor divider; the internal reference is 0.8 V and the absolute maximum is 3 V."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "Internal no-connect; may be connected to any node or left floating."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "Internal no-connect; may be connected to any node or left floating."+ },+ {+ "number": "6",+ "name": "VIN",+ "type": "power_in",+ "description": "Supplies power to the converter control circuits; recommended input range is 4.5 V to 17 V, with absolute maximum of 19 V, and must be bypassed to GND with low-ESR ceramic capacitance."+ },+ {+ "number": "7",+ "name": "PH",+ "type": "output",+ "description": "Switch-mode node connecting to the output inductor; absolute maximum is -0.6 V to 19 V DC (-2 V to 21 V for 10 ns transients)."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the control circuitry and the low-side power MOSFET; must be connected to the PCB ground plane."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 6 VIN is labelled type 'I' (input) in the datasheet pin table; it is classified here as power_in; Pin descriptions are translated from the Chinese-language datasheet. Electrical limits quoted in the; Pins 4 and 5 are both NC and pins 2 and 8 are both GND; this is as printed in the datasheet pin tabl"+ ],+ "pages_sent": 25,+ "cost_usd": 0.0991,+ "at": "2026-10-08T18:39:12"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps560200-q1",+ "pages": 25,+ "sha256": "57a9bc7a105609d4",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps560200qdgktq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps560200qdgktq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3df405d3e99f5ac849e5b1d54df5c8a33fd0125a3d3ef5db2a7b7d29bcbc3aeb",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}