← Commit history

Initial commit: component/tps55340pwpr

Ray ·103c848f2b ·
2 files changed +237
README.mdadded+52
@@ -0,0 +1,52 @@+# TPS55340PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++TPS55340PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Drain of the internal power MOSFET; connect to the switched side of the boost or SEPIC inductor or the flyback transformer. |+| 2 | SW | output | Drain of the internal power MOSFET; connect to the switched side of the boost or SEPIC inductor or the flyback transformer. |+| 3 | VIN | power_in | Input supply pin to the IC; connect to a supply voltage between 2.9 V and 32 V (voltage on this pin can differ from the boost power stage input). |+| 4 | EN | input | Enable pin; when the voltage falls below the enable threshold for more than 1 ms, the IC turns off. |+| 5 | SS | passive | Soft-start programming pin; a capacitor between SS and AGND programs the soft-start timing. |+| 6 | SYNC | input | Switching frequency synchronization pin; an external clock can set the switching frequency between 200 kHz and 1.0 MHz, otherwise tie to AGND. |+| 7 | AGND | power_in | Signal ground of the IC. |+| 8 | COMP | output | Output of the transconductance error amplifier; an external RC network on this pin compensates the regulator feedback loop. |+| 9 | FB | input | Error amplifier input and feedback pin for positive voltage regulation; connect to the center tap of a resistor divider to program the output voltage. |+| 10 | FREQ | passive | Switching frequency program pin; an external resistor connected between FREQ and AGND sets the switching frequency. |+| 11 | NC | unconnected | Reserved pin that must be connected to ground (datasheet recommends connecting NC to AGND). |+| 12 | PGND | power_in | Power ground of the IC; connected to the source of the internal power MOSFET switch. |+| 13 | PGND | power_in | Power ground of the IC; connected to the source of the internal power MOSFET switch. |+| 14 | PGND | power_in | Power ground of the IC; connected to the source of the internal power MOSFET switch. |+| 15 | PowerPAD | power_in | Exposed thermal pad that should be soldered to AGND, with thermal vias to the internal ground plane for improved power dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS55340PWPR`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `tps55340pwpr-etched.step` / `tps55340pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps55340pwpr.step` / `tps55340pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps55340) (45 pp, sha256 `05e4069b78ee3f03`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps55340pwpr-datasheet.pdf)
page.jsonadded+185
@@ -0,0 +1,185 @@+{+  "slug": "tps55340pwpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps55340pwpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps55340pwpr.kicad_sym",+    "tps55340pwpr.kicad_mod",+    "tps55340pwpr.glb",+    "tps55340pwpr.step",+    "tps55340pwpr.lbr",+    "docs/hero.png",+    "docs/tps55340pwpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS55340PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps55340",+    "parts": {+      "symbol": "tps55340pwpr.kicad_sym",+      "footprint": "tps55340pwpr.kicad_mod",+      "model_3d": "tps55340pwpr-etched.glb",+      "model_3d_plain": "tps55340pwpr.glb",+      "model_3d_step": "tps55340pwpr-etched.step",+      "model_3d_step_plain": "tps55340pwpr.step",+      "lbr": "tps55340pwpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C43862"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Drain of the internal power MOSFET; connect to the switched side of the boost or SEPIC inductor or the flyback transformer."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Drain of the internal power MOSFET; connect to the switched side of the boost or SEPIC inductor or the flyback transformer."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin to the IC; connect to a supply voltage between 2.9 V and 32 V (voltage on this pin can differ from the boost power stage input)."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; when the voltage falls below the enable threshold for more than 1 ms, the IC turns off."+      },+      {+        "number": "5",+        "name": "SS",+        "type": "passive",+        "description": "Soft-start programming pin; a capacitor between SS and AGND programs the soft-start timing."+      },+      {+        "number": "6",+        "name": "SYNC",+        "type": "input",+        "description": "Switching frequency synchronization pin; an external clock can set the switching frequency between 200 kHz and 1.0 MHz, otherwise tie to AGND."+      },+      {+        "number": "7",+        "name": "AGND",+        "type": "power_in",+        "description": "Signal ground of the IC."+      },+      {+        "number": "8",+        "name": "COMP",+        "type": "output",+        "description": "Output of the transconductance error amplifier; an external RC network on this pin compensates the regulator feedback loop."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Error amplifier input and feedback pin for positive voltage regulation; connect to the center tap of a resistor divider to program the output voltage."+      },+      {+        "number": "10",+        "name": "FREQ",+        "type": "passive",+        "description": "Switching frequency program pin; an external resistor connected between FREQ and AGND sets the switching frequency."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "Reserved pin that must be connected to ground (datasheet recommends connecting NC to AGND)."+      },+      {+        "number": "12",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the internal power MOSFET switch."+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the internal power MOSFET switch."+      },+      {+        "number": "14",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of the IC; connected to the source of the internal power MOSFET switch."+      },+      {+        "number": "15",+        "name": "PowerPAD",+        "type": "power_in",+        "description": "Exposed thermal pad that should be soldered to AGND, with thermal vias to the internal ground plane for improved power dissipation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 45,+        "cost_usd": 0.4364,+        "at": "2026-09-22T18:05:29"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps55340",+        "pages": 45,+        "sha256": "05e4069b78ee3f03",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file