component
TPS54360BDDAR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+122−8@@ -1,13 +1,132 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tps54360bddar",+ "title": "TPS54360BDDAR",+ "brief": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "tps54360bddar" ],+ "component": {+ "mpn": "TPS54360BDDAR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tps54360bddar.pdf",+ "parts": {+ "symbol": "tps54360bddar.kicad_sym",+ "footprint": "tps54360bddar.kicad_mod",+ "model_3d": "tps54360bddar.glb",+ "model_3d_step": "tps54360bddar.step",+ "lbr": "tps54360bddar.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "passive",+ "description": "Bootstrap capacitor node for the high-side MOSFET gate driver. A bootstrap capacitor is required between BOOT and SW. If the voltage on this capacitor falls below the minimum required to operate the high-side MOSFET, the output is switched off until the capacitor is refreshed. BOOT-SW max 8 V; BOOT abs max 73 V."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage, 4.5 V to 60 V operating range (65 V absolute max). Bypass with a low-ESR ceramic capacitor placed close to the pin."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable pin with internal pull-up current source. Pull below 1.2 V to disable; float to enable. Adjust the input undervoltage lockout with two resistors. Abs max 8.4 V; typical enable threshold 1.2 V."+ },+ {+ "number": "4",+ "name": "RT/CLK",+ "type": "bidirectional",+ "description": "Resistor Timing and External Clock input. An internal amplifier holds this pin at a fixed voltage when using an external resistor to ground to set the switching frequency (100 kHz to 2.5 MHz). If pulled above the PLL upper threshold (~2 V) the pin becomes a synchronization input to the internal PLL. Abs max 3.6 V."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Inverting input of the transconductance (gm) error amplifier. Connect the output feedback divider from VOUT to FB and GND (0.8 V \u00b11% internal reference)."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and input to the output switch current (PWM) comparator. Connect the frequency compensation network (Type-II RC) between COMP and GND. Abs max 3 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground. Must be electrically connected to the exposed thermal pad on the PCB for proper operation."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "power_out",+ "description": "Source of the internal high-side power MOSFET and switching node of the converter. Connect to the output inductor and catch diode. Abs max \u22120.6 V to 65 V (\u22122 V for 10-ns transients)."+ },+ {+ "number": "9",+ "name": "PAD",+ "type": "power_in",+ "description": "Exposed thermal PowerPAD on the package bottom. Must be electrically connected to GND (pin 7) on the PCB for proper electrical and thermal operation. Provides the primary heat-sink path (R\u03b8 J-C(bot) = 3.6 \u00b0C/W)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tps54360bddar.pdf",+ "pages": 46,+ "sha256": "2f01aef8076509ce",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8-EP",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tps54360bddar"+ ],+ "discovery_pitch": "TPS54360BDDAR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +144,5 @@ "docs/tps54360bddar-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }