component
TPS40211DGQ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS40211DGQ++**Texas Instruments** · DC-DC Converters · MSOP-10-EP++TPS40211DGQ from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RC | input | Oscillator frequency setting pin; connect resistor between VDD and RC and capacitor between RC and GND to set switching frequency in range 35 kHz to 1000 kHz |+| 2 | SS | input | Soft start time programming pin; external capacitor to GND configures soft start time and serves as timeout timer during overcurrent condition |+| 3 | DIS/EN | input | Disable/enable control pin; pulling above 1.2 V threshold disables device and enters shutdown mode with minimal quiescent current; internal 1 MΩ pull-down to GND enables device when floating |+| 4 | COMP | output | Error amplifier output; connect compensation network between this pin and FB pin; typical sink current 2.5 mA maximum at 1V |+| 5 | FB | input | Error amplifier inverting input; connect voltage divider from output to this pin to set output voltage referenced to 260 mV for TPS40211; compensation network connects to COMP |+| 6 | GND | power_in | Device ground reference |+| 7 | ISNS | input | Current sense input; connect sense resistor between this pin and GND; overcurrent threshold is 150 mV typical (120-180 mV range over temperature -40°C to 125°C) |+| 8 | GDRV | output | N-channel MOSFET gate driver output; provides 375-400 mA source current and 330-400 mA sink current at 4V gate drive voltage |+| 9 | BP | power_out | Bypass regulator output providing 8V nominal regulated voltage (7-9V for 0-15 mA load); requires 1.0 μF bypass capacitor between this pin and GND |+| 10 | VDD | power_in | System supply input voltage; accepts 4.5V to 52V input range; place bypass capacitor near pin connected to GND; can connect to converter output for slope compensation |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS40211DGQ`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps40211dgq-etched.step` / `tps40211dgq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40211dgq.step` / `tps40211dgq.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40210) (50 pp, sha256 `7213a870ac0ef0d9`, retrieved 2026-10-06, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40211dgq-datasheet.pdf)
page.jsonadded+179@@ -0,0 +1,179 @@+{+ "slug": "tps40211dgq",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps40211dgq",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps40211dgq.kicad_sym",+ "tps40211dgq.kicad_mod",+ "tps40211dgq.glb",+ "tps40211dgq.step",+ "tps40211dgq.lbr",+ "docs/hero.png",+ "docs/tps40211dgq-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps40211dgq-hero.glb",+ "tps40211dgq-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS40211DGQ",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps40210",+ "parts": {+ "symbol": "tps40211dgq.kicad_sym",+ "footprint": "tps40211dgq.kicad_mod",+ "model_3d": "tps40211dgq-hero.glb",+ "model_3d_plain": "tps40211dgq.glb",+ "model_3d_step": "tps40211dgq-etched.step",+ "model_3d_step_plain": "tps40211dgq.step",+ "lbr": "tps40211dgq.lbr"+ },+ "distributor_links": {+ "lcsc": 1530179,+ "digikey": "296-23411-5-ND",+ "mouser": "595-TPS40211DGQ"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T17:10:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-23411-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS40211DGQ",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RC",+ "type": "input",+ "description": "Oscillator frequency setting pin; connect resistor between VDD and RC and capacitor between RC and GND to set switching frequency in range 35 kHz to 1000 kHz"+ },+ {+ "number": "2",+ "name": "SS",+ "type": "input",+ "description": "Soft start time programming pin; external capacitor to GND configures soft start time and serves as timeout timer during overcurrent condition"+ },+ {+ "number": "3",+ "name": "DIS/EN",+ "type": "input",+ "description": "Disable/enable control pin; pulling above 1.2 V threshold disables device and enters shutdown mode with minimal quiescent current; internal 1 MΩ pull-down to GND enables device when floating"+ },+ {+ "number": "4",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output; connect compensation network between this pin and FB pin; typical sink current 2.5 mA maximum at 1V"+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Error amplifier inverting input; connect voltage divider from output to this pin to set output voltage referenced to 260 mV for TPS40211; compensation network connects to COMP"+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference"+ },+ {+ "number": "7",+ "name": "ISNS",+ "type": "input",+ "description": "Current sense input; connect sense resistor between this pin and GND; overcurrent threshold is 150 mV typical (120-180 mV range over temperature -40°C to 125°C)"+ },+ {+ "number": "8",+ "name": "GDRV",+ "type": "output",+ "description": "N-channel MOSFET gate driver output; provides 375-400 mA source current and 330-400 mA sink current at 4V gate drive voltage"+ },+ {+ "number": "9",+ "name": "BP",+ "type": "power_out",+ "description": "Bypass regulator output providing 8V nominal regulated voltage (7-9V for 0-15 mA load); requires 1.0 μF bypass capacitor between this pin and GND"+ },+ {+ "number": "10",+ "name": "VDD",+ "type": "power_in",+ "description": "System supply input voltage; accepts 4.5V to 52V input range; place bypass capacitor near pin connected to GND; can connect to converter output for slope compensation"+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package hint provided as MSOP-10-EP but datasheet specifies TPS40211DGQ as HVSSOP (DGQ) package per ",+ "exposed pad 11 added from the footprint"+ ],+ "pages_sent": 35,+ "cost_usd": 0.2588,+ "at": "2026-10-06T17:09:57"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps40210",+ "pages": 50,+ "sha256": "7213a870ac0ef0d9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}