component
TPS40210DGQR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS40210DGQR++**Texas Instruments** · DC-DC Converters · HVSSOP-10++TPS40210DGQR from Texas Instruments, in a HVSSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RC | input | Oscillator timing pin; connect resistor to VDD and capacitor to GND to set switching frequency between 35 kHz and 1000 kHz. |+| 2 | SS | input | Soft start programming pin; connect external capacitor to GND to configure soft start time with charge resistance 320-600 kΩ and discharge resistance 840-1600 kΩ. |+| 3 | DIS/EN | input | Disable/enable pin with internal 1 MΩ pull-down to GND; device enters shutdown mode when pulled above 1.3 V; enabled when below 0.7 V. |+| 4 | COMP | output | Error amplifier output for loop compensation; capable of sourcing 100-250 μA or sinking 1.2-2.5 mA; connect compensation network between COMP and FB. |+| 5 | FB | input | Error amplifier inverting input; connect output voltage divider to this pin to set output voltage; compensation network connects between FB and COMP. |+| 6 | GND | power_in | Device ground reference. |+| 7 | ISNS | input | Current sense input; connect current sense resistor between ISNS and GND; overcurrent detected at threshold voltage 120-180 mV (150 mV typical). |+| 8 | GDRV | output | Gate drive output for N-channel power MOSFET; source current 375-400 mA and sink current 330-400 mA at 4 V. |+| 9 | BP | output | Internal regulator output voltage 7-9 V at 0-15 mA load; connect 1.0 μF bypass capacitor between BP and GND. |+| 10 | VDD | power_in | System input power supply 4.5 V to 52 V; place bypass capacitor near this pin connected to GND; can be connected to converter output for slope compensation. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HVSSOP-10 |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS40210DGQR`+- Footprint: `Package_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.83x1.89mm`+- 3D model: HVSSOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `tps40210dgqr-etched.step` / `tps40210dgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40210dgqr.step` / `tps40210dgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40210) (50 pp, sha256 `7213a870ac0ef0d9`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40210dgqr-datasheet.pdf)
page.jsonadded+173@@ -0,0 +1,173 @@+{+ "slug": "tps40210dgqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps40210dgqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps40210dgqr.kicad_sym",+ "tps40210dgqr.kicad_mod",+ "tps40210dgqr.glb",+ "tps40210dgqr.step",+ "tps40210dgqr.lbr",+ "docs/hero.png",+ "docs/tps40210dgqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS40210DGQR",+ "manufacturer": "Texas Instruments",+ "package": "HVSSOP-10",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps40210",+ "parts": {+ "symbol": "tps40210dgqr.kicad_sym",+ "footprint": "tps40210dgqr.kicad_mod",+ "model_3d": "tps40210dgqr-etched.glb",+ "model_3d_plain": "tps40210dgqr.glb",+ "model_3d_step": "tps40210dgqr-etched.step",+ "model_3d_step_plain": "tps40210dgqr.step",+ "lbr": "tps40210dgqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C14728",+ "digikey": "296-26969-2-ND",+ "mouser": "595-TPS40210DGQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:13:42Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-26969-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS40210DGQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RC",+ "type": "input",+ "description": "Oscillator timing pin; connect resistor to VDD and capacitor to GND to set switching frequency between 35 kHz and 1000 kHz."+ },+ {+ "number": "2",+ "name": "SS",+ "type": "input",+ "description": "Soft start programming pin; connect external capacitor to GND to configure soft start time with charge resistance 320-600 kΩ and discharge resistance 840-1600 kΩ."+ },+ {+ "number": "3",+ "name": "DIS/EN",+ "type": "input",+ "description": "Disable/enable pin with internal 1 MΩ pull-down to GND; device enters shutdown mode when pulled above 1.3 V; enabled when below 0.7 V."+ },+ {+ "number": "4",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output for loop compensation; capable of sourcing 100-250 μA or sinking 1.2-2.5 mA; connect compensation network between COMP and FB."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Error amplifier inverting input; connect output voltage divider to this pin to set output voltage; compensation network connects between FB and COMP."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "7",+ "name": "ISNS",+ "type": "input",+ "description": "Current sense input; connect current sense resistor between ISNS and GND; overcurrent detected at threshold voltage 120-180 mV (150 mV typical)."+ },+ {+ "number": "8",+ "name": "GDRV",+ "type": "output",+ "description": "Gate drive output for N-channel power MOSFET; source current 375-400 mA and sink current 330-400 mA at 4 V."+ },+ {+ "number": "9",+ "name": "BP",+ "type": "output",+ "description": "Internal regulator output voltage 7-9 V at 0-15 mA load; connect 1.0 μF bypass capacitor between BP and GND."+ },+ {+ "number": "10",+ "name": "VDD",+ "type": "power_in",+ "description": "System input power supply 4.5 V to 52 V; place bypass capacitor near this pin connected to GND; can be connected to converter output for slope compensation."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 50,+ "cost_usd": 0.3411,+ "at": "2026-10-01T17:13:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps40210",+ "pages": 50,+ "sha256": "7213a870ac0ef0d9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}