component
TPS3702CX33DDCR
Public Made by Adomby adom
Texas Instruments Supervisor and Reset ICs, TSOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (DIGIKEY_PN 296-48309-2-ND, LCSC_PN C2068031). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+29−7
page.json+8−5@@ -26,13 +26,16 @@ "model_3d_step": "tps3702cx33ddcr.step", "lbr": "tps3702cx33ddcr.lbr" },- "distributor_links": {},+ "distributor_links": {+ "digikey": "296-48309-2-ND",+ "lcsc": "C2068031"+ }, "pins": [ { "number": "1", "name": "UV", "type": "output",- "description": "Active-low, open-drain undervoltage output. Goes low when the SENSE voltage falls below the internally set undervoltage threshold (VIT-). Requires an external pull-up resistor (2.2 kΩ to 10 kΩ recommended) terminated to the desired pull-up voltage (up to 18 V)."+ "description": "Active-low, open-drain undervoltage output. Goes low when the SENSE voltage falls below the internally set undervoltage threshold (VIT-). Requires an external pull-up resistor (2.2 k\u03a9 to 10 k\u03a9 recommended) terminated to the desired pull-up voltage (up to 18 V)." }, { "number": "2",@@ -50,19 +53,19 @@ "number": "4", "name": "SET", "type": "input",- "description": "Threshold configuration select input (0 V to 6.5 V). Tie high or low to choose between the two factory-programmed threshold configurations of the device. VIL(set) ≤ 250 mV; VIH(set) ≥ 750 mV."+ "description": "Threshold configuration select input (0 V to 6.5 V). Tie high or low to choose between the two factory-programmed threshold configurations of the device. VIL(set) \u2264 250 mV; VIH(set) \u2265 750 mV." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Supply voltage input pin, 2 V to 18 V. Place a 0.1 µF ceramic decoupling capacitor close to this pin. Typical quiescent supply current is 7 µA."+ "description": "Supply voltage input pin, 2 V to 18 V. Place a 0.1 \u00b5F ceramic decoupling capacitor close to this pin. Typical quiescent supply current is 7 \u00b5A." }, { "number": "6", "name": "OV", "type": "output",- "description": "Active-low, open-drain overvoltage output. Goes low when the SENSE voltage rises above the internally set overvoltage threshold (VIT+). Requires an external pull-up resistor (2.2 kΩ to 10 kΩ recommended) terminated to the desired pull-up voltage (up to 18 V)."+ "description": "Active-low, open-drain overvoltage output. Goes low when the SENSE voltage rises above the internally set overvoltage threshold (VIT+). Requires an external pull-up resistor (2.2 k\u03a9 to 10 k\u03a9 recommended) terminated to the desired pull-up voltage (up to 18 V)." } ], "provenance": {
tps3702cx33ddcr.lbr+21−2@@ -60,6 +60,18 @@ <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="-0.0000" dx="1.3250" dy="0.6000" layer="1"/> <smd name="6" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="TPS3702CX33DDCR">@@ -102,7 +114,14 @@ <connect gate="G$1" pin="VDD" pad="5"/> <connect gate="G$1" pin="SET" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TPS3702CX33DDCR" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ <attribute name="DIGIKEY_PN" value="296-48309-2-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C2068031" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>