component
TPS3702CX33DDCR
Public Made by Adomby adom
Texas Instruments Supervisor and Reset ICs, TSOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "UV", "type": "output",- "description": "Active-low, open-drain undervoltage output. Goes low when the SENSE voltage falls below the internally set undervoltage threshold (VIT-). Requires an external pull-up resistor (2.2 k\u03a9 to 10 k\u03a9 recommended) terminated to the desired pull-up voltage (up to 18 V)."+ "description": "Active-low, open-drain undervoltage output. Goes low when the SENSE voltage falls below the internally set undervoltage threshold (VIT-). Requires an external pull-up resistor (2.2 kΩ to 10 kΩ recommended) terminated to the desired pull-up voltage (up to 18 V)." }, { "number": "2",@@ -50,19 +50,19 @@ "number": "4", "name": "SET", "type": "input",- "description": "Threshold configuration select input (0 V to 6.5 V). Tie high or low to choose between the two factory-programmed threshold configurations of the device. VIL(set) \u2264 250 mV; VIH(set) \u2265 750 mV."+ "description": "Threshold configuration select input (0 V to 6.5 V). Tie high or low to choose between the two factory-programmed threshold configurations of the device. VIL(set) ≤ 250 mV; VIH(set) ≥ 750 mV." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Supply voltage input pin, 2 V to 18 V. Place a 0.1 \u00b5F ceramic decoupling capacitor close to this pin. Typical quiescent supply current is 7 \u00b5A."+ "description": "Supply voltage input pin, 2 V to 18 V. Place a 0.1 µF ceramic decoupling capacitor close to this pin. Typical quiescent supply current is 7 µA." }, { "number": "6", "name": "OV", "type": "output",- "description": "Active-low, open-drain overvoltage output. Goes low when the SENSE voltage rises above the internally set overvoltage threshold (VIT+). Requires an external pull-up resistor (2.2 k\u03a9 to 10 k\u03a9 recommended) terminated to the desired pull-up voltage (up to 18 V)."+ "description": "Active-low, open-drain overvoltage output. Goes low when the SENSE voltage rises above the internally set overvoltage threshold (VIT+). Requires an external pull-up resistor (2.2 kΩ to 10 kΩ recommended) terminated to the desired pull-up voltage (up to 18 V)." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/tps3702cx33ddcr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }