rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 6 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged.
symbol: the part is a 6-lead SOT-23 (DDC) - the shipped footprint has 6 pads and the datasheet agrees - but the symbol carried an 8-pin pinout padded with NCs. Pinout taken from this part's datasheet for its own ordering suffix. The library failed validate because the symbol declared pins the footprint has no pad for (connect-pad-unresolved), which also blocked its orderable attributes. Rebuilds the .lbr, re-derives pin 1 and pads.json.
symbol: the part is a 6-lead SOT-23 (DDC) - the shipped footprint has 6 pads and the datasheet agrees - but the symbol carried an 8-pin pinout padded with NCs. Pinout taken from this part's datasheet for its own ordering suffix. The library failed validate because the symbol declared pins the footprint has no pad for (connect-pad-unresolved), which also blocked its orderable attributes. Rebuilds the .lbr, re-derives pin 1 and pads.json.
distributor part numbers (digikey=296-30395-2-ND, lcsc=C33002). page.json only: this page's .lbr could not be rebuilt because the symbol pin numbers do not resolve against the footprint pad names (connect-pad-unresolved), and publishing a library that fails validate would be worse than leaving the old one. Once the footprint is fixed a rebuild will carry these into <technology> automatically.