component
TPS26600PWPR
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), HTSSOP-16-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+184−8@@ -1,13 +1,194 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tps26600pwpr",+ "title": "TPS26600PWPR",+ "brief": "Texas Instruments Surge Protection Devices (SPDs), HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Surge Protection Devices (SPDs), HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "circuit protection", "tps26600pwpr" ],+ "component": {+ "mpn": "TPS26600PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Circuit Protection",+ "subcategory": "Surge Protection Devices (SPDs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps2660",+ "parts": {+ "symbol": "tps26600pwpr.kicad_sym",+ "footprint": "tps26600pwpr.kicad_mod",+ "model_3d": "tps26600pwpr.glb",+ "model_3d_step": "tps26600pwpr.step",+ "lbr": "tps26600pwpr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Power input and supply voltage of the device. Operating range 4.2 V to 60 V, absolute max 62 V. Pins 1 and 2 are internally connected and should be tied together."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Power input and supply voltage of the device. Second IN pin (tie to pin 1)."+ },+ {+ "number": "3",+ "name": "UVLO",+ "type": "input",+ "description": "Input for setting the programmable undervoltage lockout threshold. An undervoltage event turns off the internal FET and asserts FLT. Connect UVLO to RTN to select the internal default threshold."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect."+ },+ {+ "number": "5",+ "name": "OVP",+ "type": "input",+ "description": "Input for setting the programmable overvoltage protection threshold (TPS26600/1). An overvoltage event turns off the internal FET and asserts FLT. Connect OVP to RTN to select the internal default threshold; for the TPS26602 clamp variant, connect OVP to RTN externally."+ },+ {+ "number": "6",+ "name": "MODE",+ "type": "input",+ "description": "Mode selection pin for overload fault response (auto-retry / latch-off / circuit-breaker). See Device Functional Modes."+ },+ {+ "number": "7",+ "name": "SHDN",+ "type": "input",+ "description": "Active-low shutdown pin. Pulling SHDN low puts the device into low-power shutdown mode. Cycling SHDN resets a device that has latched off due to a fault."+ },+ {+ "number": "8",+ "name": "RTN",+ "type": "passive",+ "description": "Reference for the device internal control circuits."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Connect GND to system ground."+ },+ {+ "number": "10",+ "name": "IMON",+ "type": "output",+ "description": "Analog current monitor output. Sources a scaled-down ratio (accuracy \u00b18.5%) of current through the internal FET. A resistor from this pin to RTN converts the current to a proportional voltage. Leave floating if unused."+ },+ {+ "number": "11",+ "name": "ILIM",+ "type": "bidirectional",+ "description": "A resistor from this pin to RTN sets the overload and short-circuit current limit (0.1 A to 2.23 A, RILIM \u2265 5.36 k\u03a9 for max 2.35 A)."+ },+ {+ "number": "12",+ "name": "dVdT",+ "type": "bidirectional",+ "description": "A capacitor from this pin to RTN sets the output voltage slew rate. See Hot Plug-In and In-Rush Current Control."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect."+ },+ {+ "number": "14",+ "name": "FLT",+ "type": "output",+ "description": "Active-low fault event indicator. Open-drain output; leave floating if unused."+ },+ {+ "number": "15",+ "name": "OUT",+ "type": "power_out",+ "description": "Power output of the device. Pins 15 and 16 are internally connected and should be tied together."+ },+ {+ "number": "16",+ "name": "OUT",+ "type": "power_out",+ "description": "Power output of the device. Second OUT pin (tie to pin 15)."+ },+ {+ "number": "PAD",+ "name": "PowerPAD",+ "type": "passive",+ "description": "PowerPAD must be connected to the RTN plane on PCB using multiple vias for enhanced thermal performance. Do not use PowerPAD as the only electrical connection to RTN."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps2660",+ "pages": 55,+ "sha256": "fc13f366ed16ead3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "HTSSOP-16-EP",+ "Category": "Circuit Protection",+ "Pins": "17"+ }+ },+ "variants": [+ {+ "mpn": "TPS26600PWPR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS26600PWPRRHFR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS26600PWPRRHF",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tps26600pwpr"+ ],+ "discovery_pitch": "TPS26600PWPR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +206,5 @@ "docs/tps26600pwpr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }