component
TPS259824ONRGER
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -89,19 +89,19 @@ "number": "7", "name": "ITIMER", "type": "output",- "description": "Overcurrent blanking timer output; capacitor connected to GND sets blanking interval during which output current can temporarily exceed programmed current limit up to 2.1\u00d7ILIM before circuit breaker responds; leave open for fastest response."+ "description": "Overcurrent blanking timer output; capacitor connected to GND sets blanking interval during which output current can temporarily exceed programmed current limit up to 2.1×ILIM before circuit breaker responds; leave open for fastest response." }, { "number": "8", "name": "ILIM", "type": "output",- "description": "Current limit and fast-trip threshold setting; external resistor to GND in range 82\u03a9 to 1650\u03a9 sets output current limit threshold from 2A to 15A with \u00b18% typical accuracy; fast-trip threshold set at 2.1\u00d7ILIM; do not leave floating."+ "description": "Current limit and fast-trip threshold setting; external resistor to GND in range 82Ω to 1650Ω sets output current limit threshold from 2A to 15A with ±8% typical accuracy; fast-trip threshold set at 2.1×ILIM; do not leave floating." }, { "number": "9", "name": "IMON", "type": "output",- "description": "Analog load current monitor output providing current proportional to output current flowing through FET with gain of 246\u00b5A/A and \u00b11.5% typical accuracy for IOUT > 3A; connect series resistor to GND to convert current signal to voltage."+ "description": "Analog load current monitor output providing current proportional to output current flowing through FET with gain of 246µA/A and ±1.5% typical accuracy for IOUT > 3A; connect series resistor to GND to convert current signal to voltage." }, { "number": "10",@@ -125,7 +125,7 @@ "number": "13", "name": "PG", "type": "output",- "description": "Power-good indicator output (active high open-drain with 4.2m\u03a9 typical ON-resistance); asserted when FET is fully enhanced with gate drive at VIN + 3.6V and output reaches maximum voltage; remains at logic low when VIN < VUVP."+ "description": "Power-good indicator output (active high open-drain with 4.2mΩ typical ON-resistance); asserted when FET is fully enhanced with gate drive at VIN + 3.6V and output reaches maximum voltage; remains at logic low when VIN < VUVP." }, { "number": "14",@@ -137,7 +137,7 @@ "number": "15", "name": "dVdt", "type": "output",- "description": "Output voltage slew rate control output; capacitor to GND sets output voltage rise time during turn-on to limit inrush current (calculate capacitor as 4600pF \u00f7 SR in V/ms); leave floating for fastest slew rate (7.4V/ms typical at 24V VIN)."+ "description": "Output voltage slew rate control output; capacitor to GND sets output voltage rise time during turn-on to limit inrush current (calculate capacitor as 4600pF ÷ SR in V/ms); leave floating for fastest slew rate (7.4V/ms typical at 24V VIN)." }, { "number": "16",@@ -278,5 +278,8 @@ "docs/tps259824onrger-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }