component
TPS259804ONRGER
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# TPS259804ONRGER++**Texas Instruments** · Surge Protection Devices (SPDs) · VQFN-24-EP(4x4)++TPS259804ONRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power supply connection for 2.7V to 24V operation. |+| 2 | IN | power_in | Input power supply connection for 2.7V to 24V operation. |+| 3 | IN | power_in | Input power supply connection for 2.7V to 24V operation. |+| 4 | GND | power_in | Ground return connection to system ground. |+| 5 | GND | power_in | Ground return connection to system ground. |+| 6 | EN/UVLO | input | High-level active enable pin with external voltage divider to IN and GND for adjustable UVLO threshold; do not leave floating. |+| 7 | ITIMER | output | Analog output for overcurrent blanking; external capacitor to GND sets interval duration before circuit breaker operation. |+| 8 | ILIM | output | Analog output for current limit setting; external resistor to GND (182Ω to 1650Ω range) sets output current limit threshold. |+| 9 | IMON | output | Analog load current monitor output providing 246µA/A current gain; external resistor to GND converts to voltage signal. |+| 10 | RETRY_DLY | output | Analog output for automatic retry delay; external capacitor to GND sets time interval between fault shutdown and restart attempts. |+| 11 | NRETRY | output | Analog output for retry count; external capacitor to GND sets maximum number of automatic restart attempts after fault. |+| 12 | LDSTRT | input | Analog input for load detection and handshake signal; external capacitor to GND sets startup verification window duration. |+| 13 | PG | tri_state | Digital open-drain power good output indicating FET fully enhanced and output at maximum voltage; requires external pull-up resistor. |+| 14 | GND | power_in | Ground return connection to system ground. |+| 15 | dVdt | output | Analog output for output voltage slew rate control; external capacitor to GND sets rise time during turn-on to manage inrush current. |+| 16 | IN | power_in | Input power supply connection for 2.7V to 24V operation; includes exposed thermal die pad connection. |+| 17 | OUT | power_out | Output power connection for load supply. |+| 18 | OUT | power_out | Output power connection for load supply. |+| 19 | OUT | power_out | Output power connection for load supply. |+| 20 | OUT | power_out | Output power connection for load supply. |+| 21 | OUT | power_out | Output power connection for load supply. |+| 22 | OUT | power_out | Output power connection for load supply. |+| 23 | OUT | power_out | Output power connection for load supply. |+| 24 | OUT | power_out | Output power connection for load supply. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Circuit Protection |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TPS259804ONRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps259804onrger-etched.step` / `tps259804onrger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps259804onrger.step` / `tps259804onrger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/ds/symlink/tps25980.pdf) (54 pp, sha256 `62f43bf320ab43a8`, retrieved 2026-10-06, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps259804onrger-datasheet.pdf)
page.jsonadded+263@@ -0,0 +1,263 @@+{+ "slug": "tps259804onrger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Surge Protection Devices (SPDs), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "circuit protection",+ "tps259804onrger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps259804onrger.kicad_sym",+ "tps259804onrger.kicad_mod",+ "tps259804onrger.glb",+ "tps259804onrger.step",+ "tps259804onrger.lbr",+ "docs/hero.png",+ "docs/tps259804onrger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps259804onrger-hero.glb",+ "tps259804onrger-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS259804ONRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Circuit Protection",+ "subcategory": "Surge Protection Devices (SPDs)",+ "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps25980.pdf",+ "parts": {+ "symbol": "tps259804onrger.kicad_sym",+ "footprint": "tps259804onrger.kicad_mod",+ "model_3d": "tps259804onrger-hero.glb",+ "model_3d_plain": "tps259804onrger.glb",+ "model_3d_step": "tps259804onrger-etched.step",+ "model_3d_step_plain": "tps259804onrger.step",+ "lbr": "tps259804onrger.lbr"+ },+ "distributor_links": {+ "lcsc": 2878936,+ "digikey": "296-TPS259804ONRGERTR-ND",+ "mouser": "595-TPS259804ONRGER"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T03:11:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TPS259804ONRGERTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS259804ONRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply connection for 2.7V to 24V operation."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply connection for 2.7V to 24V operation."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply connection for 2.7V to 24V operation."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return connection to system ground."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return connection to system ground."+ },+ {+ "number": "6",+ "name": "EN/UVLO",+ "type": "input",+ "description": "High-level active enable pin with external voltage divider to IN and GND for adjustable UVLO threshold; do not leave floating."+ },+ {+ "number": "7",+ "name": "ITIMER",+ "type": "output",+ "description": "Analog output for overcurrent blanking; external capacitor to GND sets interval duration before circuit breaker operation."+ },+ {+ "number": "8",+ "name": "ILIM",+ "type": "output",+ "description": "Analog output for current limit setting; external resistor to GND (182Ω to 1650Ω range) sets output current limit threshold."+ },+ {+ "number": "9",+ "name": "IMON",+ "type": "output",+ "description": "Analog load current monitor output providing 246µA/A current gain; external resistor to GND converts to voltage signal."+ },+ {+ "number": "10",+ "name": "RETRY_DLY",+ "type": "output",+ "description": "Analog output for automatic retry delay; external capacitor to GND sets time interval between fault shutdown and restart attempts."+ },+ {+ "number": "11",+ "name": "NRETRY",+ "type": "output",+ "description": "Analog output for retry count; external capacitor to GND sets maximum number of automatic restart attempts after fault."+ },+ {+ "number": "12",+ "name": "LDSTRT",+ "type": "input",+ "description": "Analog input for load detection and handshake signal; external capacitor to GND sets startup verification window duration."+ },+ {+ "number": "13",+ "name": "PG",+ "type": "tri_state",+ "description": "Digital open-drain power good output indicating FET fully enhanced and output at maximum voltage; requires external pull-up resistor."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return connection to system ground."+ },+ {+ "number": "15",+ "name": "dVdt",+ "type": "output",+ "description": "Analog output for output voltage slew rate control; external capacitor to GND sets rise time during turn-on to manage inrush current."+ },+ {+ "number": "16",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply connection for 2.7V to 24V operation; includes exposed thermal die pad connection."+ },+ {+ "number": "17",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "18",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "19",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "20",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "21",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "22",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "23",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "24",+ "name": "OUT",+ "type": "power_out",+ "description": "Output power connection for load supply."+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint",+ "dropped thermal pad ['THERMALPAD1', 'THERMALPAD2'] absent from footprint"+ ],+ "pages_sent": 42,+ "cost_usd": 0.3205,+ "at": "2026-10-06T03:11:00"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/ds/symlink/tps25980.pdf",+ "pages": 54,+ "sha256": "62f43bf320ab43a8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}