component
TPS25921ADR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -44,7 +44,7 @@ "number": "2", "name": "SS", "type": "input",- "description": "Soft-start control pin; external capacitor sets output voltage ramp rate during power-on with charging current of 0.9 to 1.2 \u00b5A typical and maximum capacitor voltage of 5.5 V."+ "description": "Soft-start control pin; external capacitor sets output voltage ramp rate during power-on with charging current of 0.9 to 1.2 µA typical and maximum capacitor voltage of 5.5 V." }, { "number": "3",@@ -68,13 +68,13 @@ "number": "6", "name": "FLT", "type": "output",- "description": "Fault indicator output (open-drain); active-low signal for undervoltage, overvoltage, or thermal shutdown faults with pull-down resistance of 22 to 32 \u03a9."+ "description": "Fault indicator output (open-drain); active-low signal for undervoltage, overvoltage, or thermal shutdown faults with pull-down resistance of 22 to 32 Ω." }, { "number": "7", "name": "ILIM", "type": "input",- "description": "Current limit programming input; external resistor from this pin to GND sets overcurrent limit from 0.4 A to 1.6 A with \u00b12% accuracy at 1 A and bias current of 6 to 16 \u00b5A."+ "description": "Current limit programming input; external resistor from this pin to GND sets overcurrent limit from 0.4 A to 1.6 A with ±2% accuracy at 1 A and bias current of 6 to 16 µA." }, { "number": "8",@@ -158,5 +158,8 @@ "docs/tps25921adr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }